Issue date: Valid until

02 March 201701 March

G Stones Technical Manager For and on behalf of the Head of

NMO I Stanton Avenue I Teddington I TW11 OJZ I United KingdomTel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I WebNMO is part of the Regulatory Delivery directorate within the Department for Business

EU-type examination certificate UK/0126/0217

Issued by:

NMO Notified Body Number 0126

In accordance with the requirements of the (S.I. 2016 No. 1153) which implement, in the United Kingdom, 2014/32/EU, this EU-type examination certificate has been issued to:

CAS Corporation #262, Geurugogae-ro Gwangjeok-myeon Yangju-si Gyeonggi-do Republic of Korea In respect of an automatic gravimetric filling instrument, comprising of a weighing controller designated the CIunit comprising a load receptor and associated load cell(scharacteristics:

Reference accuracy class: Maximum capacity: Minimum load:

Scale interval:

Number of scale intervals

UK/0126/

02 March 2017 01 March 2027

For and on behalf of the Head of Technical Services Stanton Avenue I Teddington I TW11 OJZ I United Kingdom

Tel +44 (0) 20 8943 7272 I Fax +44 (0) 20 8943 7270 I Web www.gov.uk/government/organisations/regulatoryNMO is part of the Regulatory Delivery directorate within the Department for Business, Energy & Industrial Strategy

MID Annex B -

type examination certificate

Notified Body Number 0126

In accordance with the requirements of the Measuring Instruments Regulations 2016 which implement, in the United Kingdom,

type examination certificate has been issued to:

In respect of an automatic gravimetric filling instrument, comprising of a weighing controller designated the CI-600 Series, a material feed mechanism, and a weighing unit comprising a load receptor and associated load cell(s) and having the following

Ref (x) = 0.2 Dependent upon load cell(s) specificationDependent upon operating accuracy class X(x)

≥ 1 g

≤ 10,000

UK/0126/0217

MI-006

0135

www.gov.uk/government/organisations/regulatory-delivery Industrial Strategy

Rev 12 (12 January 2017)

Measuring Instruments Regulations 2016 Council Directive

type examination certificate has been issued to:

In respect of an automatic gravimetric filling instrument, comprising of a weighing 600 Series, a material feed mechanism, and a weighing

) and having the following

Dependent upon load cell(s) specification Dependent upon operating accuracy class X(x)

2/7

Descriptive Annex

1 INTRODUCTION This pattern of an automatic gravimetric filling instrument for dispensing predetermined loads of powdered, granular or liquid materials consists of a feeding device, a weighing unit, and a CI-600 Series weighing controller. 2 FUNCTIONAL DESCRIPTION

2.1 Mechanical

The instrument comprises material handling facilities (feeding device, weighing unit etc) which shall enable it to respect the MPEs during normal operation. 2.1.1 Material feeding device The feeding device may be any one of the following:

− Gravity feeder

− Gravity feeder with agitator

− Single screw or double screw feeder

− Belt feeder

− Vibratory feeder 2.1.2 Weighing unit The weighing unit is either a load receptor incorporating a weigh hopper and associated discharge device for weighing of target weights in the weigh hopper (net weighing), or a load receptor without a discharge device for weighing directly into containers (gross weighing). 2.1.3 Load cell(s) Any compatible load cell(s) may be used providing the following conditions are met:

− There is a respective OIML Certificate of Conformity (R60) or a Parts (Test) Certificate (EN45501) issued for the load cell by a Notified Body responsible for type examination under Directive 2014/31/EU.

− The certificate contains the load cell types and the necessary load cell data required for the manufacturer's declaration of compatibility of modules (WELMEC 2, 2015, No 10), and any particular installation requirements. A load cell marked NH is allowed only if humidity testing to EN45501 has been conducted on this load cell.

− The compatibility of load cells and indicator is established by the manufacturer by means of the compatibility of modules form, contained in the above WELMEC 2 document.

− The load transmission conforms to one of the examples detailed in WELMEC Guide 2.4, “Guide for Load Cells”.

2.2 CI-600 Series weighing controllers

The weighing controllers are described in Part Certificate GB-1605.

3/7

2.3 Operation

The operator enters or selects the predetermined (target) weight and other operational inputs via the keys on the front of the controller. The controller operates the filling instrument in response to signals from the load cell(s) and plant sensors.

The instrument performs an automatic zero-setting (gross weighing) or tare-setting (net weighing) at the start of automatic operation, as part of every automatic weighing cycle.

3 TECHNICAL DATA

The technical data for the weighing controller can be found in Part Certificate GB-1605.

4 PERIPHERAL DEVICES AND INTERFACES

4.1 Interfaces

The instrument may be fitted with the following protected interfaces:

− Load cell connection

− RS232/485

− Relay In/Out (4 inputs, 6 outputs) (CI-605A)

− Relay In/Out (6 inputs, 8 outputs) (CI-607A)

− Analogue Out (CI-601A, CI-605A, CI-607A)

4.2 Peripheral devices

The instrument may be connected to any peripheral device that has been issued with a Parts Certificate by a Notified Body responsible for Annex B (MI-006) under Directive 2014/32/EU in any Member State and bears the CE marking of conformity to the relevant directives; or

A peripheral device without a Parts certificate may be connected under the following conditions:

− it bears the CE marking for conformity to the EMC Directive;

− it is not capable of transmitting any data or instruction into the weighing instrument, other than to release a printout, checking for correct data transmission or validation;

− it prints weighing results and other data as received from the weighing instrument without any modification or further processing; and

− it complies with the applicable requirements of Directive 2014/32/EU Paragraph 8.1 of Annex I.

5 APPROVAL CONDITIONS

The certificate is issued subject to the following conditions:

5.1 Inscriptions

The instrument shall bear the following inscriptions:

- CE marking - Supplementary metrology marking - Manufacturer’s name, registered trade name or registered trade mark and

postal address - Identification number of the notified body

4/7

- Information in respect of its accuracy

and, when applicable:

- Information in respect of the conditions of use - Measuring capacity - Identity marking (a type, batch or serial number or other element allowing their

identification) - Number of the EU-type examination certificate - Information whether or not additional devices providing metrological results

comply with the provisions of Directive 2014/32/EU on legal metrological control

The markings and inscriptions shall fulfil the requirements of Article 8, Article 21, Article 22 and Point 9 of Annex I of Directive 2014/32/EU.

5.2 The instrument shall be permanently installed. 6 LOCATION OF SEALS AND VERIFICATION MARKS

6.1 The rating plate should be located on the instrument so that it is easily accessible and clearly visible in its regular operating position. The data plate shall be impossible to remove without it being destroyed.

6.2 Components that may not be dismantled or adjusted by the user (jumper allowing access to firmware and legally relevant parameters, load cell connection) are secured by either a wire and seal, or by a tamper evident label and securing mark. The securing mark may be either:

− a mark of the manufacturer and/or manufacturer’s representative, or

− an official mark of a verification officer.

Figures 4 and 5 show the sealing methods for the enclosure (preventing access to the jumper) and the load cell connection.

7 ALTERNATIVES

There are currently no authorised alternatives.

8 ILLUSTRATIONS

Figure 1 CI-600 Series indicator Figure 2 CI-600 Series display Figure 3 Markings example Figure 4 Enclosure sealing method Figure 5 Load cell connection sealing method 9 CERTIFICATE HISTORY

Issue № Date Description

UK/0126/0217 02 March 2017 Type examination certificate first issued.

- - No revisions have been issued.

Figure 1

5/7

Figure 1 CI-600 Series indicator

Figure 2 CI-600 Series display

6/7

Figure 3 Markings example

7/7

Figure 4 Enclosure sealing method

Figure 5 Load cell connection sealing method

Crown copyright 2017 NMO Regulatory Delivery directorate Department for Business, Energy & Industrial Strategy This material may be freely reproduced except for sale