Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
EJ ESSENTR
►16,500 SOLUTIONS�FROM ONE SOURCE
ESSENTIAL SOLUTIONS DELIVERED
► YOUR_ MARKET·······································•We can make your job easier with
16,500 products, all with industryleading quality. Time is money, so we make sure we have what you need, when you need it, with 1 billion items in stock and fast despatch.
A
SMALL
SELECTION
FROM OUR
RANGE
JUST A FEW OF THE APPLICATIONS WE SERVE:
WHI TE GOODS
From screws to spacers you'll find thousands of cost-effective, high-quality solutions for your machines.
MEDICAL
Light to heavy-duty solutions, including products for noise isolation and vibration reduction.
TELECOMMUNICATION CABINETS
Indoor or outdoor cabinets, we can give you the circuit board and cable managements solutions you need, to fit your products.
INDUSTRIAL MACHINERY
From handles to feet, you'll find thousands of cost-effective, high-quality solutions for your machines.
GENERATORS
Light to heavy-duty solutions, including products for noise isolation and vibration reduction.
ELECTRICAL ENCLOSURES
Indoor or outdoor cabinets, we can give you the accessories and security solutions you need to complete your product.
CONTENTS ··············································································•
U!HIJ•WGl-i Cable Ties and Mounts
Cable Wraps
Cable Glands
PCB Spacers and Other Hardwares
LED Spacers
Ferrite Cores
Fibre Plugs
Self-Adhesive Feet
Washers and Spacers
Screws
Riverts and Panel Fasteners
Grommets
GENERAL MANUFACTURING
Caps and Plugs
Hose Protection
Pipe and Flange Protection
Locks and Hinges
Gaskets
Handles
Machinery Feet
Tube Inserts
SEE OUR ENTIRE RANGE
Get our free catalogue with over 16,500 great solutions
02
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
CABLE TIES
AND MOUNTS
♦ J)Twist lock
Standard Cable Tie
Micro Wire Saddle
Cable Tie Halder FTH-5/FTH-7/FTH-8/ FTH-10/MFTH Series
MAX CABLE TYPES
TIE WIDTH (mm)
♦ Cable Tie HolderFTH-5/FTH-7/FTH-8/FTH-10/MFTH Series
Cable Tie Holder FTH-9 Series
Push Mount Cable Holder FTH-6 Series
♦ Micro Wire Saddle on Adhesive BaseMWSB/MWSEB Series
♦ Twist LockTL Series
♦ Standard Cable Tie SR 1785/SR 1762 Series
Cable Tie with Stainless Steel Tooth SR 1792 Series
Locking Beaded Tie LBT Series
Double-Locking Cable Tie SR 6105 Series
7.8
4.8
6.6
BUNDLE DIMENSION (mm)
1.3 to 8.4
4to 46
22to 370
24to102
35.6
30 to 230
Adjustable Cable Clamps, Blind Hole Mount Cable Ties, Cable Clips, Elastomer Strap, Flat Cable Wire Saddle, Rivet Mount Cable Tie, Releasable Push Mount Ties, Screw Mount Cable Tie Halder, Stainless Steel Cable Tie Installation Tool, Stainless Steel
CABLE TIES AND MOUNTS
Push Mount Cable Tie Holder
Cable Tie Holder FTH-9
Rivet Mount Cable Tie
Cable Ties with Stainless Steel
Tooth
FEATURES & BENEFITS
Bind Hole Mount Cable Tie
Elastomer Strap
Locking Beaded Tie
Double-Locking Cable Tie
Material/Color: Natural Nylon 6/6, Acrylic (adhesive) Rating: UL94 V-2
Material/Color: Natural Nylon 6/6, Acrylic/Rubber (adhesive) Rating: UL94 V-2. Designed with teeth inside to support cable holding.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Designed to accommodate maximum of 6.6mm cable tie width.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-0
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Apply by twisting to lock and untwisting to unlock.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Cost effective cable and wire management solution.
Material/Color: Black Nylon 6/6 Rating: UL94 V-2. Supplied in 304 stainless steel. Operating temperature -40°C to 85°C.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Locking or tying option. Beads prevent cables or wires from slipping.
Material/Color: Black Nylon 6/6. Double-locking head design that offers secure fastening.
Cable Ties, and more on: Website > Cable Ties and Cable Management> Cable Ties and Accessories
CABLE TIES AND MOUNTS
CABLE WRAPS
TYPES MAX BUNDLE (mm)0
♦ Rapid Cable WrapSR 1723 Series
Harness Wrap HW Series
Spiral Wrap HR Series
Heat Shinkable Braided Sleeving EHSS Series
Nylon Expandable Sleeving EPA Series
6 to 32
2.0-15.0 to 25.0-150.0
1.6-12.7 to 4.8-25.4
DIAMETER (mm)
Supplied: 10.0 to 70.0 Recovery: 5.0 to 35.0
EXPANDABLE
RANGE (mm)
Min: 1.0 to 30.0 Max: 6.0 to 60.0
Hinged Locking Clamps, SHR Clips, Aluminium Heat Reflect Fiberglass Sleeving, Nylon conduit Fittings, Metal Edge Mounting Clip for Corrugated Tube, Corrugated Tubing, Nomex Sleeving, Polyester Self-Closing Wrap, and more on:
CABLE WRAPS
Aluminium Heat Reflect Fiberglass
Sleeving
Heat Shrinkable Braided Sleeving
SHRClip
Hinged Locking Clamp
FEATURES & BENEFITS
Nylon Expandable Sleeving
Material/Color: Black Nylon/Polypropylene Rating: UL 94 V-0*. Provides abrasion protection. Allows breakout of cables.
Material/Color: Natural/Black Polyethylene. Provides abrasion protection. Allows breakout of cables.
Material/Color: Natural/Black/Clear Polyethylene/Nylon/ Polycarbonate. Right-handed wrap.
Material/Color: Black Polyolefin and Polyester. Excellent abrasion resistance and noise reduction.
Material/Color: Black/Grey Polyamide 6.6. Used to protect wire harness, cable assemblies and fluid pipes.
Website> Cable Ties and Cable Management > Conduit and Accessories
CABLE WRAPS
CABLE GLANDS
Nylon Cable Gland
Stainless Steel Cable Gland
ATEX Cable Gland
TYPES MOUNTING THREAD SIZE
♦ Nylon Cable Gland SR 1704 Series
Brass Cable Gland SR 1717 Series
ATEX Low Voltage Cable Gland SR 6464 Series
Multi Slot Cable Gland SR 6462 Series
EMC Cable Gland SR 6266 Series
- M12 x 1.5 to M63 x 1.5 - PG7to PG48 - NPT ¾" to 1"
- M12 x 1.5 to M63 x 1.5 - PG7to PG48 - NPT¾" to 1"
M16 x 1.5 to M63 x 1.5
M12 x 1.5 to M40 x 1.5
M12 x 1.5 to M40 x 1.5
Stainless Steel Cable Gland, ATEX Cable Gland, Spiral Cable Gland, and more on:
CABLE GLANDS
ATEX Low Voltage Cable Gland
Brass Cable Gland
EMC Cable Gland
FEATURES & BENEFITS
Material/Color: Nylon 6
Multi Slot Cable Gland
Rating: IP68. UL 94 V-0. Locknut and sealing washer available separately.
Material/Color: Nickel Plated Bross Rating: IP68. Locknut and sealing washer available separately. CE approved. Temperature range: -20°C + 85°C
Material/Color: Black Polyamide Rating: DIN IP69K/ EN IP68. Certified PTB 05 ATEX 1068 X. Temperature range -40°C to 75°C.
Material/Color: EPDM Rating: IP68. Moulded sealing washer. Temperature range -40°C to 100°C.
Material/Color: Nickel Plated Brass Rating: IP68. Constructed to terminate shielded cable. Temperature range -20°C to 100°C.
Website> Cable Ties and Cable Management > Cable Glands and Accessories
CABLE GLANDS
PCB SPACERS AND
OTHER HARDWARES
♦ '
Push Spacer
7"
Reverse Locking Spacer
STANDOFF TYPES HEIGHT (mm)
♦ Dual Locking SpacerDLCBS Series
Push Spacer PS Series
Reverse Locking Spacer RLCBSR/RLCBSRE/RLCBSPR/RCBSE Series
Specialist Spacer SR 6434 Series
Hexagonal Threaded/Metal Spacer SR 6437 Series
Hex Spacer - Female/Female SR 2701 Series
4.8 to 22.2
4.8 to 22.2
6.4 to 15.9
6.4 to 28.5
THREAD HOLE (mm)
M2.5 to MS
M2 to MS
Rivet Based Spacer, Self Retaining Spacer, Mini Support Post Self-Treaded Spacer, Metric Low Voltage Insulator, and more on:
P CB SPACERS ANO OTHER HARDWARES
Mini Support Post Self-Treaded
Spacer
Specialist Spacer
Hexagon Threaded/ Metal Spacer
FEATURES & BENEFITS
Material/Color: Nylon 6/6
Self Retaining Spacer
Metric low Voltage Insulator
Hex Spacer Female/Female
Rivet Based Spacer
Rating: UL94 V-0/V-2. Both ends lock by hand and wings provide tight fit to board.
Material/Color: Nylon 6/6 Rating: UL94 V-0, V-2. Supports heavy loaded PC board.
Material/Color: Nylon 6/6 Rating: UL94 V-2. Minimum protrusion and inserts from chassis underside.
Material/Color: Nylon 6/6 Secured by a self-topping screw. Simple Snap-in mounting.
Material/Color: PPS Black Heat resistance up to 200°C.
Material/Color: Nickel Plated Brass Screw-in design.
Website> Circuit Board Hardware
PCB SPACERS AND OTHER HARDWARES •
LED SPACERS
♦ .
High Temperature Metric LED Spacer LEDM Series
TYPES FITS LED
LED Spacer LEDS2M Series
LED Spacer LEDS1/LEDS2/LEDS3 Series
♦ High Temperature MetricLED SpacerLEDM Series
Square LED SpacerSQLEDS Series
I LEO SPACERS
T-1 ¾ (5mm)
T-1 (3mm) to T-1 ¾ (5mm)
Heights of 2mm to 30mm
T-1 (3mm) to T-1 ¾ (5mm)
Heights of 2mm to 30mm
T-1 (3mm) to T-1 ¾ (5mm)
Heights of 2mm to 30mm
0.8 SQ.
lnline Beads
Flat Cable Cores
FEATURES & BENEFITS
I I
Material/Color: AS, Black Nylon 6/6 (casing). Use for round cable and easy assembly.
Material/Color: KSB. Use on wire assemblies and MATV CATV industries.
Material/Color: KSB. Ring configuration provides greater utilization of ferrite properties.
Material/Color: AS/KSB. Use on flat ribbon cables.
Material: KSB. Available in both axial and radial configurations.
Wound Bead, Multiline Bead and more on: Website > EMI Suppression Ferrite Cores
FERRITE CORES
FIBRE PLUGS
♦ .
::;
� RJ Connector Plug
6.5
TYPES DIMENSION
(mm)
USB Connector Plug CP-USB-B Series
Blanking Pl ug BPE Series
♦ RJ Connector PlugCP-RJ Series
FIBRE PLUGS
11.8 X 12.4
12.8 to 25.8 (L) 9.3 to 19.1 (W)
10.5 to 12.5
I "A" I�
M �: Blanking Plug
USB Connector Plug
FEATURES & BENEFITS
Material/Color: Black Silicon Rubber. Protects USB port.
Material: Nylon 6/6 Rating: UL94 V-2. Covers unused terminals.
Material: Silicon/EPDM. Covers RJ11/RJ45 connector.
More on: Website > Fibre Management> Blanking Plugs and Caps
FIBRE PLUGS
SELF-ADHESIVE
FEET
♦ .
Stick-on Feet/Buffer -
@ �-I-- -w•____j 1
BASE DIMENSION TYPES (mm)
PTFE Glider Adhesive Fixing SR 1461 Series
Anti-Slip Pad ASPR/ASPS Series
Stick-on Disc SR 1577 Series
♦ Stick-on Feet/BufferSR 1593 Series
19.0 to 100.0
12.7to25.4
10.0 to 45.0
6.4to45.7
Soft fast Foot, Push On Feet, Threaded Insert Bumper, Saddle and Insert Feet, Machinery Feet, Adjustable Feet, Screw-On Feet, Hexagonal and Rubber Feet,
• SELF-ADHESIVE FEET
D
d
H
d1 d1
h H H
D Dd d
h
d1 d1
ddH h
D D
d
d2
d1
Transparent Screw-Crossed Pan Head
Slotted Thumb Screw
Flanged Hexagonal Screws with Internal Start Drive
Slotted Cheese Head Screw
FEATURES & BENEFITS
� � ��
Slotted Countersunk Head Screw
Material/Color: Natural/Black PVDF/Nylon 6/6
Thumb Screw
Rating: DIN 931/933. Lightweight. Provides electric insulation.
Material/Color: Natural Polypropylene, PVDF/Black/Natural Nylon 6/6 Rating: DIN 84. ISO 1207. Lightweight. Provides electric insulation.
Material/Color: Natural Polypropylene, PVDF/Block/Natural Nylon 6/6 Rating: DIN 963. ISO 2009. Lightweight. Provides electric insulation.
Material/Color: Natural Nylon 6/6 Rating: UL94 V-2. Lightweight. Provides electric insulation.
Material/Color: Natural Nylon 6/6. Lightweight. Provides electric insulation.
Material/Color: Nylon and 30% Gloss F iber. Extra grip. Resistant to numerous fluid & chemical.
Website > Fasteners and Fixings > Screws and Nuts
SCREWS
RIVETS AND
PANEL FASTENERS
Snap Fastener
Quarter Turn Fastener
Push Rivet
FITS HOLE PANEL TYPES DI AMETER THICKNESS
Push Rivet SR 1963 Series
Quarter Turn Fastener SR 6268 Series
Screw Rivet Fastener SR 6269 Series
Snap Rivet "P" Type SRP Series
♦ Snap FastenerSR/SRV0 Series
Snap Rivet Heat Resistant SRHR Series
Snap LatchSLG/SLPL/SLPB Series
(mm) (mm)
3.0 to 8.0 1 to 13
6.0 to 9.0 4 to8
9.8 to10.6 1.5 to 10
3.1 -3.2 to 1.5 to 4.5 4.0 -4.2
2.4-2.2 to 0.6 to10.5 6.1 -6.2
3.1 -3.2 to 1 to 8.5 4.1-4.2
4.7-4.8 to 1.5 to 5.2 8.0-8.2
Blind Rivet, Mini Tough Snap Rivet, Folding Leg Rivet, Push Rivet Blunt, Tough Snap Rivet, Screw Rivet, Rack Panel Quarter Turn Fastener, Clear Push Rivet, and more on:
RIVETS ANO PANEL FASTENERS
Screw Rivet fastener
Screw Rivet
FEATURES & BENEFITS
Snap Rivet "P" Type
Mini Tough Snap Rivet
Folding Leg Rivet
Push Rivet Blunt
Snap Rivet Heat Resistant
Material/Color: Black/Natural Nylon. Expands for secure tight fit. Good electrical insulation.
Material/Color: POM. Lock & unlock by quarter turning head. Cross head quarter turn fastener.
Material/Color: Polymide PA6 . Lorge hold diameter. Unscrew to remove. Push fit install.
Material: Block Polysulfone Rating: UL94 V-1 . Withstands temperature up to 155 °C.
Material: Nylon 6/6 Rating: UL94 V-0/V-2. Easy installation by hand.
Material: Nylon 4/6 Rating: UL94 V-2. Withstands temperature up to 130 °C.
Material: Nylon 6/6 Rating: UL94 V-2. Grommet and mating plunger sold separately.
Website> Fasteners and Fixings > Rivets and Panel fasteners
RIVETS AND PANEL FASTENERS
GROMMETS
Continuous Grommet Strip with Adhesive
Grommet
Metal Continuous Grommet
TYPES FITS HOLE DIAMETER (mm)
♦ Grommet SR 1703 Series
Standard Grommet -Imperial & Metric SR 1700/1701/1713 Series
Quick-Fit Grommet SR 1702 Series
Diaphragm Grommet SR 1705 Series
Stepped Grommet SR 170 9 Series
Angular Hole Grommet AHG Series
4.8 to 52.0
1.5 to 48.0
10.0 to 28.0
6.4to 42.0
12.7 to 26.0
24.0
Continuous Grommet Strip with Adhesive, Cable Grommet, Metal Continuous Grommet, Grommet Strip, and more on:
GROMMETS
Standard Grommet - Imperial & Metric
Grommet
Diaphragm Grommet
FEATURES & BENEFITS
Material/Color: Grey EPDM
Stepped Grommet
Quick-Fit Grommet
Angular Hole Grommet
Rating: IP67. Withstands vibration. Suitable for external applications. Provides dust and watertight seal.
Material/Color: Black Thermoplastic Rubber/PVC/EPDM. Protects wires and cables through panels. Withstands temperature -40°C to 135°C.
Material/Color: Black PVC/TPE/Silicon Rubber. Snap neatly and quickly into position.
Material/Color: Black PVC/TPE. Thin central film can be pierced to allow a range of different sized wires to pass through.
Material/Color: Black PVC. Stepped sleeve can be cut to requirements. Suit a range of cable diameters.
Material/Color: Black EDPM, 60 Shore. Max angle 45°.
Website> Cable Ties and Cable Management > Grommets, Strain Relief and Blanking Plugs
GROMMETS
CAPS AND PLUGS
♦ .
Type 1 - Lateral Pull
Type 2 - Central Pull
Push Fit Plug
TYPES DIMENSION (mm) 0
Tapered Cap/Plug SR 1000 Series
♦ Push Fit Plug SR 1055 Series
Threaded Plug SR 1125 Series
Threaded Cap SR 1126 Series
E CAPS& PLUGS
Plug: 4.6 to 162.3 Cap: 1.3 to 151.8
13.2 to 34.5 Fit thread: M10 to M36
Metric: M8 x 1 to M52 x 2.0 UNF: ¾" x24 to 1 ¾" x 12 BSP: ¼" x 28 to 2" x 11
Metric: M8 x 1 to M52 x 2.0 UNF: ¼" x 28 to 1 ¾" x 12 BSP: ¼" x 28 to 2 ½" x 11
Tapered Cap/Plug
Threaded Cap
Threaded Plug
Moss Pull Plug (Lateral Pull)
Non-Threaded End Cap
Grease Nipple Cap
PVC Flexicap Threaded Protection Plug Threaded Protection Cap
FEATURES & BENEFITS
Material/Color: Red LOPE. Easy fitting and removal. Provides excellent protection from damage, dirt, moisture and corrosion during storage and transportation.
Material/Color: Red LOPE. Patented design. Fit threaded or plain ports. Strong, flexible pull-tab for quick removal.
Material/Color: Yellow HOPE with nitrite rubber. Applicable for BSP/UNF threads. Con be fitted either manually with a power tool or with screwdriver.
Material/Color: Yellow HOPE. Internal neoprene rubber sealing disk limits fluid leakage. Hexagonal head enables the cop to be applied or removed by spanner or socket at a low torque.
More on: Website > Caps and Plugs
CAPS& PLUGS •
HOSE PROTECTION
.
Spiralguard
TYPES BUNDLE DIAMETER (mm)
Fire Protection Sleeve SR 6001 Series
Nylon Textile Sleeve ENSSN Series
♦ Spiralguard SR 1081 Series
Spiralguard FRAS SR 1081 Series
10.0 to 50.0
17.0 to 93.0
9.0 to 80.0
13.0 to 80.0
Premium Fire Protection Sleeve, Coloured Spiral Guard®, Hose Protector, Spiral Wrap, Quick Sleeve, Cinch Strap - Standard & Hanging, and more on:
E HOSE PROTECTION
Fire Protection Sleeve
Clinch Strap
FEATURES & BENEFITS
Nylon Textile Sleeve
Spiralguard FRAS
Plastic Hose Clamp
Material/Color: Red Silicone outer sleeve is self-extinguishing. And 6-micron calcium silicate yarn inner sleeve, has good insulation properties, 700°C service temperature. Its flexible sleeving allows easy application to curved or irregular shapes.
Material/Color: Black Nylon. Working temperature -60°C to +125°C. Melting point at 220+10°C.
Material/Color: Black HDPE. Smooth edged, lightweight and high performance material. Excellent recovery memory to maximise the covering of the hose. Exceptional anti-crushing performance. High abrasion resistance.
Material/Color: Black HDPE. Flame Retardant Anti-Static Spiral Guard®. Tested and approved in accordance with the former British Coal specification 182:1986, satisfying the requirements of the non-metallic scheme for use underground. Tested and approved by Mine Safety Laboratory Department of Mineral Resources, NSW to AS2660 FRAS Compliance-1991. International Standard: ISO 6805.
Website> Hydraulic and Pneumatic Protection > Hose Protection
HOSE PROTECTION •
PIPE AND FLANGE
PROTECTION
Face Self Adhesive Disc All custom sizes available. Contact us today!
TYPES DIMENSION 0
Heavy Duty Recessed Cap SR 1370 Series
Flange Protector SR 1355 Series
Flange Protection Disc SR 1172 Series
♦ Face Self Adhesive DiscSR 1361 Series
Full Face Flange Protector SR 1365 Series
Cap for Standard Pipe Sizes SR 1358 Series
6.0" ta 16.0" ON 150 to ON 400
½"to3"
½"to20" ON 10 to DN 600
½"to32" ON 10 to ON 800
ON 10 to DN 250
ON 15 to DN 160
Flexible Pipe Cap, Pipe Chock, Ribbed Pipe-End Plug, Bolt Hole, Flange Protector, SAE High-Pressure Flange Protector, and more on:
E PIPE AND FLANGE PROTECTION
Heavy Duty Recessed Cap
Flange Protector Disc
FEATURES & BENEFITS
Full Face Flange Protector
Flange Protector
Cap for Standard Pipe Sizes
Material/Color: Block LDPE. Protect pipe bevels and internal walls from corrosion and damage. Accept crone hooks for moving pipes during storage, transit and laying. Resistant to temperatures from -30°C to +60°C.
Material/Color: Block LDPE. Protects against dirt, moisture, point, sand and shot blasting.
Material/Color: PolyCor™ Corrugated LDPE. Roting: DIN Flanges DN 10 to DN 600 - pressure groups PN 6, 10, 16, 25 and 40. ANSI Flanges 1/2" to 32" - pressure groups 150, 300, 600 and 900 lbs. Provides simple, cost-effective protection for flanges.
Material/Color: Block rubber. Suits both DIN and ANSI flange specifications. Withstands temperature ranging from - 15°C to +70°C. High resistance to ozone, weather, petrol, oil, nonoxidation acids, and more. All sizes available readily.
Material/Color: Yellow LDPE. Designed with flexible fins to support snug fit into bores. Suits flanges to DIN 2627-2638, 150, BS5504 and ANSIB16.5.
Material/Color: Yellow LDPE. Wide range of sizes to fit, low cost and high quality. Designed with internal ribs to ensure tight fit. Vent hole option to release pressure build up.
Website> Pipe and Flange Protection
PIPE ANO FLANGE PROTECTION •
LOCKS AND
HINGES
Conceal Hinge
Heavy Duty Cabinet Lock
Metal Leaf Hinge
Mini Push to Close Lock
Heavy Duty Paddle Lock
TYPES GRIP RANGE (mm)
Quarter Turn Latch with Spring SR 5530 Series
Heavy Duty Cabinet Lock SR 5481 Series
Heavy Duty Paddle Lock SR 5538 Series
Mini Push to Close Lock SR 5548 Series
♦ Metal Leaf HingeSR 5506 Series
Flat Hinge SR 5546 Series
1.2mm Continuous Hinge SR 5590 Series
Concealed Hinge SR 5545 Series
Heavy Duty Hinge SR 5744 Series
8.5 to 24.5
18.5
DIMENSION (mm)
140.0 X 110.0 to 140.0 X 120.0
86.0 X 73.0
40.0 X 40.0 to 76.0 X 50.0
60.0 X 106.0 to 60.0 x136.0
32,0 X 1016,0 to 38,0 X 1016,0
32,5 X 60,0 to 39,0 X 65,0
80.0 X 70.0 to 80.0 x150.0
Display Locks, Compression Locks, Latches and Catches, and more on:
E LOCKSANOHINGES
Heavy Duty Hinge Flat Hinge
FEATURES & BENEFITS
Metal Leaf Hinge
1.2mm Continuous Hinge
Material/Color: Die-cast zinc alloy, Chrome plated/Black powder coated/Nylon housing Rating: IP 65. Ideal for electrical cabinets and enclosures. 6 head styles and 7 types of grip ranges.
Material/Color: Die-cast zinc Alloy, Chrome finished. Specialised fixing plate ensures easy fixing. Flush design provides flat surface on cabinet.
Material/Finish: Black Steel or Polyamide for Body and Handle, Steel or Brass Cam Rating: IP 54. Lock can be released from inside by moving the cam. Supplied with one key 4444.
Material/Color: Polyamide Body, Die-cost zinc alloy Handle, Acetyl Cam, Steel Mounting Brocket. Suits best for generators with small doors and panels. Provided with two standard Euro keys (5333).
Material/Color: Die-cast zinc alloy/Black powder coated/ Chrome plated. Stainless Steel Pin. Suits best for flush mounted doors. Maximum rotation at 270°.
Material/Finish: Steel in black coated finish/Die-cast zinc alloy and Delrin Bearing. Stainless Steel Pin.
Material: Steel/304 Stainless. Can be riveted, screwed or welded into position. Ideal for lightweight furniture, cabinet enclosures and sheet metal fabrication.
Material: Zinc plated Steel/Stainless Steel AISI 304. Adaptable for both right and left hand operations. Ideal for metal enclosures and machinery covers.
Material: Die-cast zinc alloy Body, Stainless Steel Pin.
Website> Locks, Latches, Catches and Hinges
LOCKS AND HINGES •
GASKETS
♦ .
PVC Edge Protector
TYPES CLAMPING RANGE (mm)
♦ PVC E dge ProtectorSR 5557 Series
Side Bubble Gasket SR 5558 Series
Dual Flipper Gasket SR 5555 Series
Sponge A dhesive Seal SR 5561 Series
1.0 to 8.0
0.5 to 5.0
1.0 to 3.0
DIMENSION (mm)
10.0 x3.0 to 30.0 X 5.0
Top Bubble Gasket, EMI Gasketing, Weather/Gasketing Strip, and more on:
El GASKETS
Side Bubble Gasket Dual Flipper Gasket
Sponge Adhesive Seal
FEATURES & BENEFITS
Material/Color: Block PVC with Steel Spring Core. Supplied in rolls of 20m. Profiles ore flexible and pressed on by hand. Suitable for -40°C to +90°C.
Material/Color: Block EDPM. Supplied in rolls of 20m. Clip-on profile offering edge protection and sealing. Offered in 12 types. Profiles ore flexible and pressed on by hand.
Material/Color: Black EDPM. Supplied in rolls of 20m. Dual material; hard rubber carrier to improve grip to panel and softer rubber to aid compression. Profiles are flexible and are pressed on by hand.
Material/Color: Block EDPM. Suits best for metal enclosures. Adhesive for sealing provided. Supplied in 10 m rolls. Easy to apply.
Website> Gasketing, Toggle Clamps and Enclosure Accessories > Gasketing
GASKETS.
HANDLES
♦ .
Machine Handle
TYPES LENGTH (mm)
Bridge Handle SR 1534 Series
♦ Machine HandleSR 5534 Series
Aluminum Handle SR 5102 Series
Pull Handle Oval Internal Threads Series
Indexed Clamping Handles SR 1536 Series
Flush Handle, Clamping Handle, and more on:
E HANDLES
119.5 to 163.0
300.0 to 1000.0
100.0 to 350.0
3" to 12" 3.94 to 15.75
43.0 to 104.0
Bridge Handle Aluminium Handle
Pull Handle Indexed Clamping Handle
FEATURES & BENEFITS
Material/Color: Block Nylon 6. Impact-resistant material, yet lightweight and versatile.
Material/Color: Polyomide with Steel Bor/Polyomide with aluminum bar/Die-cost zinc alloy in Block or Silver. Strong handle suitable for machine applications.
Material/Color: Silver/Block Aluminum. Five attractive styles.
Material: Aluminum/Bross/SS Available in 7 types of finishing.
Material: Gloss Filled Nylon 6. Operate by simple lift and rotate action. Easy handle adjustment to safe position.
Website> Handles, Knobs and Positioning Components
HANDLES -
MACHINERY
FEET
♦ .
Standard Nan Articulating Adjustable Feet
Premium Machinery Mounting Feet
Pressed Steel Bolt Down Feet
TYPES THREAD SIZE (mm)
Premium Machinery Mounting Feet SR 1569 Series
Standard Machine Feet SR 1545 Series
Pressed Steel Bolt Down Feet SR 5440 Series
Vibration Dampening Machine Feet SR 5443 Series
A. Standard Non Articulating Adjustable TFeet
SR 1572 Series
M8to M24
M8to M24
M16to M20
M16to M20
25.0 to 48.0
Heavy/Light Duty Fixed Stud Levelling Foot, Hygienic Stainless Steel Machine Mount, Standard Non-Articulating Adjustable Feet, Industrial Articulated Stainless Steel Feet, Adjustable Tilt Glide, All-metal Height Adjuster, Smooth-Based Adjustable Glide, and
E MACHINERY FEET
Standard Machine Feet
Vibration Dampening Machine Feet
FEATURES & BENEFITS
I
Anti-Vibration Machine Mounts
Industrial Articulated Stainless Steel Feet
Heavy/Ligt Fixed Stud Levelling Foot
Rubber Fixed Foot
Material/Color: Plain base with Stainless Steel/ENP Mild Steel Stud. Stud manufactured from solid hexagon bar by rolling process ensuring both accuracy and strength of thread. Nylon base offers high-load capacity, chemical resistance and stability during temperature change. 10mm diameter mounting hole.
Material: Nylon base with zinc plated Steel Bolt. Ideal for mounting machinery or conveyers. High load bearing capacity. Maximum recommended load; 900Kg. 20° Articulation. NonSlip Feet.
Material: Galvanised Steel, NBR 80 rubber. High load capacity. 8° articulations. 4 x 12.5mm fixing holes. With or without rubber pad for base. Ideal for conveyors and machines.
Material: Pressed Stainless Steel Type 303 with inset Nitrile rubber core base, Stainless Steel Type 303 stud. 7° Articulations. Vibration resistant. High adhesion to floor. Ideal for machines.
Material/Color: Black Polypropylene. Outer-Hex Slotted Head for adjustment. POZI socket in base for easy adjustment.
more on: Website > Feet
MACHINERY FEET •
TUBE INSERTS
♦ .
Standard Round Ribbed Insert
OUTER WALL
TYPES DIMENSION THICKNESS
Ribbed Square Insert SR 1540 Series
♦ Standard Round Ribbed Insert SR 1530 Series
Ribbed Rectangular Insert SR 1550 Series
Threaded Insert SR 1570 Series
(mm) (mm)
12.7 to 150.0
10.0 to 120.0
25.0 X 12.0 to 150.0 X 100.0
0.8 to 8.0
0.8to4.5
0.75 to 8.0
THREAD SIZE (metric)
M6to M10
Chrome-Plated Square Insert, Domed Round Insert, Heavy-Duty Round Insert, Angled Rectangular Insert, Metal-Pronged Round Insert, Lightweight Square Insert, and more on:
E TUBE INSERTS
Ribbed Square Insert Chrome-Plated Square Insert
Ribbed Rectangular
Threaded Insert
Metal-Threaded Insert
FEATURES & BENEFITS
Material/Color: Black/White/Mid Grey/Dark Grey LDPE. Covers sharp tube edges. Ribbed for easy assembly and secure fitting.
Material/Color: Black/White LDPE. Ribbed for easy assembly and secure fitting. Provides protection from sharp tube edges. Ideal for educational and play equipment.
Material/Color: Black/White/Mid Grey/Dork Grey LDPE. Ideal for most popular sizes and gauges of rectangular tubes.
Material: Nylon/HDPE/PP/LDPE. Can be used with either adjustable feet (SR 1572) or adjustable tilt glides (SR 1575). Suitable for wall thickness of 1.0 - 2.0mm.
Website> Tube Inserts, Connectors and Ferrules
TUBE INSERTS Ill
EJ ESSENT
•••• • • • • ••• • ••••••••••••••• • ••••••••••••••• • • ••••••••••• •
•••••••••••••••••• ••• ••••••••••••• •••••• •••• • •••• ••••••••• ••
•• • • •• •••• ••••••••••••
• • • ••••••••••• • ••• ••••••• • •••• •• ••••• •••••• • •• ••••••• • ••••••• • • • •• •••• ••••• •
• ••• •••• • •••• • • ••• • • • • •
SAVE TIME,
SAVE MONEY
• .
With limited resources for purchasing, you need one source to save time and money.
We can make your job easier with a wide range of standard and custom solutions for your Equipment Manufacturing applications.
Whether your project is large or small, we can scale to your needs.
A A A
FAST � >1 > ISO 9001:2008 BILLION despatch parts in stock
accredited
¥ �
NEN
TS
TEL. 0845 758 5070 www.essentracomponents.co.u
k A new name, making the same great products
OVER6,000NEWPRODUCTS