Essential Fiber Test Tools · 2017-11-11 · 3 Essential Fiber Test Tools MTS-˜˚˚˚ Scalable Multitest Platform The MTS-8000 is the world’s most scalable installation, maintenance

Essential Fiber Test Tools

The challenge of providing the increased bandwidth needed to support the development of services such as triple play is ongoing and can be daunting. Running optical fibre much deeper into the access network, in some cases all the way to the customer premises, is an important part of the strategy of every service provider. The appeal is that a fibre optic infrastructure offers the potential for practically unlimited bandwidth and also facilitates greater control over operating, administering, and provisioning the system.

Deployment, turn-up, and maintenance of fibre optic networks are in the core of the service provider’s mission to ensure optimum quality of experience. Every stage of the network life cycle demands qualitycontrols and proactive measurements to ensure integrity and efficiency of the optical transmission.

Viavi offers a comprehensive portfolio of portable fibre optic test instruments and monitoring system solutions to cover all your network lifecycle needs for field testing, from installation and provisioning to maintenance and service assurance. From point solutions to highly scalable test platforms, ensure your technicians are always equipped with the right tool to do the job tight – the first time.

2 Essential Fibre Test Tools

3 Essential Fiber Test Tools

MTS-8000 Scalable Multitest PlatformThe MTS-8000 is the world’s most scalable installation, maintenance and troubleshooting test platform for next generation ultra-high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities and additional fibre inspection & test, ROADM and 40G / 100G test requirements, including the OSA-710 module for in-service, in-band OSNR on pol-mux signals.

Benefits

� Traditional fibre and BERT testing to advanced high speed ROADM testing and 40G. 100G, 200G and 100G service activation, maintenance and troubleshooting

� First In-Service Pol-Mux Optical Spectrum Analyzer. - Perform in-band OSNR measurements on high speed ROADM based DWDM networks without shutting down optical channels.

� Increased scalability with more than 40 applications and hundreds of test

� Boosted processing power, built-in pass/fail functionality and automated test scripts drive best practices and close-out reports in PDF format

� Stay connected with 3G, WiFi, Bluetooth, USB and Ethernet

Applications

� Optical connector inspection and full fibre characterization with OTDR, IL, ORL, CD, PMD and AP

� Test and troubleshoot WDM systems and ROADM networks with Optical Spectrum Analyzers.

� Test and troubleshoot converged Ethernet/IP networks at 10 Mbps to 100 Gpbs interfaces and capture and analyze packets

� Test Layer 1-3 Ethernet/IP SLAs with an automated, enhanced RFC 2544/SAMComplete per ITU-T Y.1564.

� Test TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64, including service disruption measurements and path overhead (POH) capture with triggers

� Measure PMD on live traffic and tests in-band OSNR in DWDM/ROADM systems with In-Service PMD

� Installation and maintenance of OTN networks up to 11.1 Gbps and OTU4 with full 100 Gpbs client.

� Supports 1/2/4/8/10 Gpbs FC for installation and maintenance of SANs and low-latency circuits

Key Features

� 10.4 inch high-visibility touch screen display

� High-speed PowerPC processor, rugged SATA solid-state hard disk and latest high-capacity Li Ion battery technologies

� 1G Ethernet, Wireless connectivity (3G, Wifi, Bluetooth) and four USB interfaces

� Built-in optical options including power meter, VFL and talk set

� Automated connector inspection with IEC pass/fail analysis

� Compatible with MTS-6000A test modules

MTS-6000A Compact Network Test PlatformThe MTS-6000A is a compact and lightweight test platform designed for the installation and maintenance of fibre networks. Modular in design, the MTS-6000A offers an extensive portfolio of test functionality for multiple network layers. A single Multi-Services Application module provides an integrated solution for Ethernet, SONET/SDH, and higher-layer tests. Optical Modules allow thorough testing of short-haul, long-haul, FTTx, CWDM, and high speed 40G networks.

Benefits

� Offers maximum usability and minimum footprint with over than 100 applications in a compact, lightweight platform

� Accesses the cloud via Wi-Fi/3G/4G LTE and manages assets and data with StrataSync

� Large compatibility with more than 80 modules and field upgradable options

Applications

� Test any multimode or single-mode P2P and P2M FTTx/PON fibre networks with OTDR

� Test CWDM and DWDM networks with Optical Spectrum Analysers

� Test fibre dispersion (PMD/CD)

� Test 10 GigE LAN- and WAN-PHY at 850, 1310, and 1550 nm

� Test dual- and single-port 10 Mb/s to 1 GigE

� Test SONET/SDH at OC-3/STM-1 through OC-192/STM-64 line rates

� Test TCP/UDP at 10 Mb/s to 10 Gb/s with stateful emulation

� Test IP Video at 10 Mb/s to 10 GigE line rates

Key Features

� Lightweight platform: only 2.4kg/5.3 lbs.

� Large 8 inch transreflective TFT color display improves viewing under any conditions.

� Intuitive graphical user interface with touchscreen

� Long battery life using smart Lithium ion cell.

� Connection checker with VFL, power meter, ORL and video inspection scope options.

� Built-in optical talkset option for communicating along the fibre.

� Remotely controlled (Ethernet/IP) / WiFi / 3G /4G

� Fast data transfer via USB, Ethernet port and 1GB extended memory.

� GPS option to certify coordinates

4

MTS 5800−100GThe MTS 5800-100G handheld network tester is the one tool that network technicians and engineers need to install and maintain their networks. It supports both legacy and emerging technologies to address network applications including metro/core, data center interconnect, and business services test applications, for fibre testing, service activation, troubleshooting, and maintenance. It supports the latest technology interfaces including SFP/SFP+/SFP28 and QSFP+/QSFP28/CFP4.

Benefits

� Simplifies multi-technology testing with an all-in-one dual-100 G handheld unit

� Optimized for field use with a multitouch screen, scripted workflows, and clear pass/fail results

� Supports efficient best practices with repeatable methods and procedures

� Speeds up fibre optics testing, Ethernet service activation, and troubleshooting tests

Applications

� Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 100 G interfaces for data centers and core / metro networks

� Fibre link characterization and troubleshooting

� Installation and maintenance of OTN and legacy SONET/SDH and DSx/PDH networks

� Mobile and backhaul characterization, validation, and troubleshooting including synchronization. 5G-ready.

Key Features

� Comprehensive rate testing ranging from DSx/PDH (1.5M/2M) through to 112G OTU4.

� Saves time with the industry’s fastest RFC 2544 and Y.1564 SAMComplete™ Ethernet service-activation test including nanosecond-accurate latency measurements. Also supports RFC 6349 TrueSpeed.

� Ensures QSFP+/QSFP28 and CFP4 modules run error-free with the field optimized Optics Self-Test

� Speed and efficiency in testing OTN service activation with the OTN Check workflow automated script

� Supports Viavi’s 4100-Series OTDR and COSA modules with Smart Link Mapper™, fibre microscopes, and optical power meters

� Tests synchronization and timing using the TEM (Timing Expansion Module

SmartOTDR Handheld Fibre TesterThe lightweight and compact SmartOTDR speeds and optimizes field testing of metro and access networks—with a tailored OTDR interface and automatic analysis. The SmartOTDR essential handheld fibre tester is an affordable, easy-to-use device for techs at any level, with robust wireless connectivity options that increase productivity anywhere. It integrates all the essential fibre test requirements into a single device with OTDR measurement, fibre end face analysis, optical loss testing and visual fault locator.

Benefits

� Ensures fast and easy measurements

� One touch operation, automatic analysis, and tailored OTDR user interface for different skill level

� Manage data from anywhere in the network

� Several connectivity options (3G/4G smartphones via USB and optional Bluetooth/WiFi) enable remote control as well as data and work-order transfers to-and-from tablets, smartphones, and computers.

Applications

� Characterize point-to-point access & metro fibre networks

� Qualify and troubleshoot FTTH/PON networks

� Qualify and troubleshoot singlemode FTTA/DAS front haul

Key Features

� Single-/dual-/tri-wavelength versions with 1310, 1550, and in-service 1625 nm wavelengths

� PON optimized to test through a 1x128 splitter

� Automated fibre inspection pass/fail analysis software

� Integrated CW light source on OTDR port

� Built-in optical power meter and VFL options

� Large 5-inch touch screen display


Remote Optical Network Monitoring Viavi provides standalone remote test and monitoring solutions for Core, Metro, Access and FTTH networks. The Optical Network Monitoring System (ONMSi) accurately detects and locates fibre degradation. Measurement schedules allow network operators to assess long term fibre performance to form the basis of efficient asset management. SmartOTU is an innovative solution that monitors critical fibres in small private networks. It can be played right out of the box with no training or IT configuration required. When a fibre event occurs, it alerts users within minutes either by email, SMS or SNMP.

Benefits

� Reduce Mean-Time-To-Repair by locating fibre faults in minutes

� Avoid service disruptions and improve service assurance and SLA contracts by detecting any fibre degradation in advance

� Improve network security by quickly pinpointing any fibre intrusion

� Start small and then expand at any rate needed

� Deploy an out of the box system for small networks or a large system for P2P and P2MP networks – all the way to the ONT

Applications

� Optical Network Troubleshooting for both P2P and P2MP networks

� SLA management

� Network security

� Network construction

� Fibre monitoring of data centers, industrial sites, and municipalities

� Storage Area Network security for banking and finance

� Submarine cable protection

� OEM for System Integrators

� Instant view of optical network performance

Key Features

� Large range of Test modules and Optical switches

� Scalable system from one to hundreds of test probes

� Multiple dashboards for instant network and system diagnostics

� Alarm notification by e-mail, SMS, Web Services or SNMP; compliant with OSS-J and ITU-X733

� 100% web based in a secure environment

� Single GUI (Graphical User Interface) for map and monitoring display

� Detects fibre faults all the way to the subscriber

� Locates faults smarter (associates network landmarks information)

� Highest fibre fault accuracy with Industry’s leading OTDR series

� Highly integrated 2RU unit with no local PC required

� Modular OTDR and Switch design for multiple applications

Deployment and Maintenance Handheld SolutionsViavi Deployment & Maintenance solutions feature instruments that provide insight into the root cause of service-impacting issues. Field technicians can correctly and efficiently install, certify, and maintain fibre networks. While at the same time, efficiently maintain the industry’s best practices for standards-based network certification.

SmartPocket OLP-34/-35/-38 Optical Power Meters and OLS-34/-35/-36 Optical Light Sources

A family of pocket-sized and low-cost optical power meters and light sources for the installation and maintenance of singlemode and multimode fibre optic networks. Viavi SmartPocket Optical Power Meters and Light Sources offer an excellent price/performance ratio in a rugged and pocket-sized housing for straightforward use in the field. Mainly used to measure optical power level (dBm) in premises, telco, or CATV fibre optic networks, the SmartPocket OLP can also be combined with the SmartPocket light sources for insertion loss measurement of multimode or singlemode fibre links.

Benefits

� Rugged and pocket-sized design

� Large display combined with an easy-to-use interface

� Power Meters-Auto-wavelength recognition function for saving test time and error-free testing

� Sources- Combines up to 4 wavelengths (850/1300/1310/1550 nm) in one unit

Applications

� The OLP/OLS-34 is dedicated to LAN/WAN Access and Enterprise multimode or single mode applications.

� The OLP/OLS-35 covers all standard singlemode Telecommunication networks

� The OLP-38 is the higher power (+26dBm) version for amplified DWDM system applications, and the OLS-36 is the quad-wavelength solution covering both multimode and singlemode wavelengths in one product.

Key Features

� Extra long battery lifetime (>200 hours).

� 3-years calibration period

� Micro USB interface for power supply or data transfer

� Can be part of the SmartPocket OMK-3x Optical Test Kits

6

SmartClass Fibre OLP-85 and -85P Inspection-Ready Optical Power Meters

With a 100 dB dynamic range, the OLP-85 and -85P optical power meters are perfect for any fibre-optic network power or loss test application. Their high accuracy over the entire range means that the OLP-85 and -85P perfectly fit applications where low power or very high power needs to be measured.

Benefits

� Complete jobs faster, correctly, and on time—right the first time

� Automated pass/fail fibre inspection analysis with the optional P5000i microscope, also available with integrated PCM

� Compact, rugged, weather-proof design

Applications

� Measurement of optical power (absolute and relative)

� Measurement of optical insertion loss together with a Viavi optical light source OLS-3x or OLS-8x

� Inspection of optical connectors (IBYC)

� In-service loss test option

Key Features

� Battery-operated field-portable optical power meters with an 800 to 1700 nm measurement wavelength range (1 nm incremental setting) and high accuracy over an ultra-wide 100 dB dynamic range

� 2.5 mm and optional 1.25 mm universal push-pull (UPP) adapter system compatible with all optical connector types

� 3.5-in color touch screen with integrated stylus

� Individual threshold settings for power and loss pass/fail analysis

� Onboard fibre inspection and test results storage with time stamp

� Data transfer and remote control via USB or Ethernet interface

� Auto-lambda and multi-lambda test functions in combination with Viavi light sources

SmartClass Fibre OLS-85 Inspection-Ready Optical Light Sources

The OLS-85 inspection-ready optical light source is the ideal partner to the SmartClass Fibre OLP-85 and OLP-85P to perform automatic loss test. Its specific wavelength combinations make it optimal for link loss testing and long-haul, metro, and access telecommunication network characterization, as well as data center and local area network testing.

Benefits


� Automated pass/fail fibre inspection analysis with the optional P5000i microscope


Applications

� Measurement of fibre insertion loss together with a Viavi optical power meter OLP-3x or OLP-8x


� In-service loss test option

Key Features

� Battery-operated field-portable optical light sources in different versions with multimode and singlemode wavelengths

� Interchangeable optical adapters (Senko) for FC, SC, ST and LC optical connectors


� Individual threshold settings pass/fail analysis



� Auto-lambda and multi-lambda test functions in combination with Viavi optical power meters

SmartClass Fibre ORL-85 and -85P Inspection-Ready Optical Return Loss Meters

The SmartClass™ Fibre ORL-85 and -85P combine microscope, optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR), and connector inspection in one compact instrument. The ultra-sensitive power meter combined with stabilized light sources enable up to a 70 dB measurement range.

Benefits


� Automated pass/fail fibre inspection analysis with the optional P5000i microscope, also available with integrated PCM


Applications

� Measurement of optical return ross

� Measurement of optical power (absolute and relative)

� Measurement of optical insertion loss


Key Features

� Battery-operated field-portable optical return loss meter with an 1260 to 1650 nm measurement wavelength range (1 nm incremental setting) at the power meter, multiple wavelengths at the source and return loss up to 70 dB

� Interchangeable optical adapters (Senko) for FC, SC, ST and LC optical connectors


� Individual threshold settings for power and loss pass/fail analysis



� Auto-lambda and multi-lambda test functions

SmartClass Fibre OLP-85 and -85P Inspection-Ready

test application. Their high accuracy over the entire range means that the OLP-85 and -85P perfectly fit applications where low power or

Complete jobs faster, correctly, and on time—


MicroscopesFibreChek Probe Microscope

The FibreChek probe delivers a single “all-in-one” handheld solution that every fibre technician can rely on for all of today’s fibre inspection needs in a fully autonomous, handheld device. With built-in capabilities for image viewing, auto-focus, Pass/Fail analysis, storing/recalling results, the FibreChek probe completely automates inspection workflow to ensure fast and accurate performance.

Benefits

� Achieve fully autonomous inspection with an “all-in-one” solution

� Automate the inspection workflow

� Ensure accurate and fast test performance

� Easily access connections in any location

� Connect with anything and test anywhere!

Applications

� Inspecting fibre end faces – both patch cord and bulkhead

� Guaranteeing end face condition with certification reports

� Instantly capture, analyze, and grade fibre end face images and obtain a PASS/FAIL result according to pre-configured criteria setting

Key Features

� Integrated touch screen with live fibre viewing

� Auto-Center

� Auto-Focus

� Built-in fibre endface analysis

� User-selectable acceptance profiles

� Stores results on device or export

� Bluetooth, WiFi, and USB connection capabilities

P5000i Fibre Microscope

The P5000i makes it fast and easy to certify that every connection in the network is clear and optimized. This intelligent fibre microscope removes the guesswork from fibre inspection and provides reliable and objective PASS/FAIL analysis of fibres. The P5000i fibre microscope also enables PASS/FAIL analysis using many Viavi test solutions that users already rely on for essential network testing.

Benefits

� Inspect and certify fibre end face quality at the push of a button, making your technicians instant fibre experts

� Use an intelligent fibre microscope to certify fibre performance and deliver the results to an existing Viavi test platforms

� Eliminate confusion with fast, easy, and objective testing

� Help your technicians get it right the first time; drive best practices, improve quality of work, and optimize their workflow

� Ensure lifetime connections and protect your network infrastructure by preventing damage to fibre optic components and systems

Applications

� Ensure physical layer performance by guaranteeing fibre connectivity meets industry standards

� Instantly capture, analyze, and grade fibre end face images and obtain a PASS/FAIL result according to pre-configured criteria setting

� Standardize fibre inspection, analysis, and grading process throughout fibre network

Key Features

� Repeatable Pass/Fail analysis eliminates subjective guesswork from the measurement process

� User-selectable acceptance profiles allow certification to any acceptance criteria

� Includes FibreChekPRO™ software for analysis and reporting with PC/laptop

� Automatic Image Centering ensures the fibre in always on the center of the screen

� Dual-Magnification switching allows easy toggling between low & high magnifications.in both live and analysis views

� Easily connect to a SmartOTDR/MTS-2000/4000/5800/6000A/ 8000v2, HST-3000, SMARTClass Fibre, Certifier40G, DSAM and CellAdvisor via USB without the need for any additional adapters or software.

� Easily connect to mobile Android™ devices/tablets (via USB) or iOS™ devices/tablets (via WiFi) using FibreChekMOBILE App to inspect endface quality, measure optical power, and certify fibre connectors to industry standards directly on the mobile device

fibre technician can rely on for all of today’s fibre inspection needs in a fully autonomous, handheld device. With built-in capabilities for image viewing, auto-focus, Pass/Fail analysis, storing/recalling results, the FibreChek probe completely automates inspection workflow to ensure fast and accurate performance.

© 2017 Viavi Solutions, Inc.Product specifications and descriptions in this document are subject to change without notice. highspeedfiber-concilium-br-fit-tm-ae30186036 900 0217

Contact Us t: +27 12 678 9200e: [email protected]: www.concilium.co.za

www.concilium.co.za

2016 BTR Diamond Award winner:

FibreChek Probe

2015 BTR Diamond Award winner:

Smart OTDR

2016 BTR Diamond

•201

6 DIA

M

OND TECHNOLOGY REVIEW

S•

4

Concilium Technologies, Viavi Solutions’ Partner in sub Saharan Africa

Sales and support for all Viavi products

Concilium Technologies (Pty) Ltd., was established in 1999, but many of the employees still with us today were employees of HP T&M South Africa long before that, so we have a vast experience in supplying and supporting a wide range of telecom focused solutions, from handhelds to installed monitoring systems, literally from DC to light.

The different areas of operation are supported by a highly skilled, technically trained workforce with capabilities in sales, support, installation and commissioning and repair and calibration, underpinned by strong expertise in project and quality management.

A purpose-built facility in Centurion, South Africa, provides an environment in which technological know-how combines with problem-solving ability to produce complete turnkey solutions for specific customer needs. Concilium’s emphasis on value-added solutions—as opposed to specific products and technologies—applies to small and large projects. These custom offerings are often our innovative response to a solution required by a client but not normally available from a single supplier.

Concilium forges client relationships that add value through our:

� Innovative, comprehensive solutions

� Culture of openness and teamwork

� Excellent delivery, through highly trained people

� Ability to respond to unique and specific needs

� Commitment to empowerment and growing a skills base

The Total Package

� A well equipped RF and optical repair & calibration facility staffed by experienced factory trained technicians that caters for a broad range of the products we sell

� Installation and commissioning of distributed telecom and fibre monitoring systems throughout sub Saharan Africa

� Contracted local uptime support for installed systems from skilled application support engineers

� Training on products and associated technologies either in house or on site

Frost & Sullivan Fibre Optics Test Equipment Market Leader AwardViavi has been awarded the coveted Frost & Sullivan Fiber Optics Test Equipment Market Leader Award

for fibre-optic test equipment for four years in a row.

Documents

Essential Fiber Test Tools · 2017-11-11 · 3 Essential Fiber Test Tools MTS-˜˚˚˚ Scalable Multitest Platform The MTS-8000 is the world’s most scalable installation, maintenance