Essbase Studio Accessibility Guide 11.1.2.2

Embed Size (px)

DESCRIPTION

Oracle Essbase Studio Accessibility Guide

Text of Essbase Studio Accessibility Guide 11.1.2.2

  • ORACLE ESSBASE STUDIO

    Release 11.1.2.2

    ACCESSIBILITY GUIDE

    CONTENTS IN BRIEF

    Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

    Enabling Accessibility for Essbase Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

    Essbase Studio Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

  • IntroductionThis guide describes the accessibility features of Oracle Essbase Studio. This guide is accessiblein HTML format.

    Oracle customers have access to electronic support through My Oracle Support. Forinformation, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=ac&id=trs if you are hearing impaired.

    For information about Oracle's commitment to accessibility, visit the Oracle AccessibilityProgram website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

    Enabling Accessibility for Essbase StudioEssbase Studio has accessibility features built into it. These features focus on keyboard shortcutsto some mouse actions. These features are always available, there is nothing to enable or disablein Essbase Studio for the keyboard shortcuts to work.

    Keyboard shortcuts common to Microsoft Windows, such as Ctrl+S for Save, are notdocumented.

    Oracle has certified this release of Essbase Studio on the following platform combinations:

    Table 1 Supported Combinations of Screen Readers and Web Browsers

    Screen Reader Web Browser

    JAWS 12 Internet Explorer 9

    JAWS 12 Internet Explorer 8

    Note: If you are using JAWS Screen Reading Software, Oracle recommends using the MicrosoftInternet Explorer browser.

    Essbase Studio Keyboard ShortcutsThe section contains the following topics:

    l Keyboard Shortcuts for Access and Navigation on page 3

    Keyboard shortcuts that assist with accessing Essbase Studio Console elements andnavigating through the interface.

    l Keyboard Shortcuts in Dialog Boxes and Editors on page 8

    The tables in this section describe keyboard shortcuts found in Essbase Studio Console dialogboxes and editors.

    l Keyboard Shortcuts in the Minischema Editor on page 35

    The tables in this section describe keyboard equivalents used in the Essbase Studiominischema editors.

    2 Accessibility Guide

  • Keyboard Shortcuts for Access and NavigationThe tables in this section describe keyboard equivalents that assist with accessing Essbase StudioConsole elements and navigating through the interface:

    l Table 2, Accessing Main Areas (or View Tabs) of the Essbase Studio Interface, on page3

    l Table 3, Accessing Elements in the Metadata Navigator and Data Source Navigator, onpage 4

    l Table 4, Right-Click Commands Common to Most Elements in the Metadata Navigator,on page 5

    l Table 5, Accessing Editors, Wizards, and Dialog Boxes to Create New Elements, on page6

    l Table 6, Accessing Dialog Boxes from the Menu Bar, on page 6

    l Table 7, Working with Editors in the Work Area, on page 7

    l Table 8, Accessing Help Menu Items, on page 7

    Table 2 Accessing Main Areas (or View Tabs) of the Essbase Studio Interface

    Keys Action

    F10

    Note: Press Esc to remove focus from the menu bar.

    Access to the Essbase Studio menubar.

    Ctrl+5

    Or:

    Alt+V, then N

    Or:

    Press and hold down Ctrl, press F7, use up and down arrow keys to select Metadata Navigator, andthen press Enter

    Focus on Metadata Navigator.

    Ctrl+3

    Or:

    Alt+V, then A

    Or:

    Press and hold down Ctrl, press F7, use up and down arrow keys to select Data Sources, and thenpress Enter

    Focus on Data Source Navigator.

    Ctrl+2

    Or:

    Alt+V, then C

    Or:

    Press and hold down Ctrl, press F7, use up and down arrow keys to select Console Messages, andthen press Enter

    Focus on Console Messages tab.

    Accessibility Guide 3

  • Keys Action

    Shift+F10 Display the context menuappropriate to the focus of thecursor.

    Esc Close, without saving, an opendialog box or wizard.

    Shift-Tab until focus in on the actual tab title.

    l Shift-Tab twice for Metadata Navigator, Data Sources, and Minischemas tabs

    l Shift-Tab once for Search and Console Messages tabs

    Then, Alt+- (hyphen), use down arrow to select Close (or press C)

    Close a view tab

    Table 3 Accessing Elements in the Metadata Navigator and Data Source Navigator

    Keys Action

    Ctrl+5 or Ctrl+3, then use up and down arrow keys Navigate through tree structure.

    Right arrow key Open a folder.

    Use the up and down arrow keys to navigate to the Root folder, Shift+F10, thenE

    Expand all folders in the Metadata Navigator.

    Left arrow key Close a folder.

    Use the up and down arrow keys to navigate to the Root folder, Shift+F10, thenC

    Collapse all folders in the Metadata Navigator.

    Use the up and down arrow keys to navigate to a folder, Shift+F10, then H Refresh the contents of a folder.

    Use the up and down arrow keys to navigate to the Root folder, Shift+F10, thenH

    Refresh all folders in the Metadata Navigator.

    Shift+F10 Context menu for tree items.

    Use arrow keys to navigate to element location in tree, press Enter Launch the wizard, editor, or properties dialog box forthe selected metadata element.

    Alt+E, then S Open the Search tab in the Metadata Navigator.

    Alt+E, then F Open the Find dialog box.

    Ctrl+3, use arrow keys to navigate to the element, Shift+F10, then E Launch the editor or Properties dialog box for theselected source element in the Data Source Navigator(applies to data source connection names, OracleEssbase connection names, and minischemas).

    Ctrl+3, use arrow keys to navigate to the element, Shift+F10, then O Launch the Properties dialog box for the selected sourceelement (applies to source table names, columnnames, and minischemas).

    Ctrl+5, use arrow keys to navigate to the metadata element, Shift+F10, then V Launch sample data for the selected metadata elementin the Metadata Navigator.

    4 Accessibility Guide

  • Keys Action

    Ctrl+3, use arrow keys to navigate to the column element , Shift+F10, then V Launch sample data for the selected source columnelement in the Data Source Navigator.

    Ctrl+5, use arrow keys to navigate to the element, Shift+F10, then L Launch the lineage editor in the context of the selectedmetadata element in the Metadata Navigator.

    Ctrl+5, use arrow keys to navigate in the Metadata Navigator, select an Essbasemodel, then press Enter

    Launch the graphical view of the Essbase model in thework area.

    Ctrl+5, use arrow keys to navigate in the Metadata Navigator, select an Essbasemodel, Shift+F10, then B

    Launch the Essbase Model Properties dialog box.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F,followed by N, then L

    Launch the Text List dialog box.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F,followed by N, then A

    Note: The Alias Set Manager is no longer part of Essbase Studio. This commandnow launches the Alias Sets dialog box.

    Launch the Alias Sets dialog box.

    Ctrl+5, use arrow keys to navigate in the Metadata Navigator, select an Essbasemodel, then:

    Shift+F10, then W

    Or

    Alt+F, then W

    Launch the Cube Deployment Wizard.

    Ctrl+5, use arrow keys to navigate to a element in the Metadata Navigator, selectan Essbase model, Shift+F10, then Y for Show Deployment History

    Launch the deployment history in the work area.

    Ctrl+3, use arrow keys to navigate to a data source connection, Shift+F10, thenU

    Launch the Incremental Update dialog box.

    Ctrl+3, use arrow keys to navigate to a data source connection, Shift+F10, thenI

    Launch the Introspection Wizard.

    Ctrl+3, use arrow keys to navigate to a Microsoft SQL Server data sourceconnection, Shift+F10, then Y

    Microsoft SQL Server users only: Toggle the ShowFriendly Names option

    Table 4 Right-Click Commands Common to Most Elements in the Metadata Navigator

    Keys Action

    Shift+F10, then E Edit an element.

    Shift+F10, then C Copy an element.

    Shift+F10, then P Paste an element.

    Shift+F10, then N Rename an element.

    Shift+F10, then D Delete an element.

    Shift+F10, then H Refresh cube schema or Oracle Essbase model

    Accessibility Guide 5

  • Table 5 Accessing Editors, Wizards, and Dialog Boxes to Create New Elements

    Keys Action

    Alt+F, followed by N, then O

    Or:

    Alt+F, followed by N, then Enter (the default selection is for Connection Wizard)

    Launch Connection Wizard.

    Alt+F, followed by N, then I Launch Minischema Wizard.

    Alt+F, followed by N, then U Launch the User-Defined Table dialogbox.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F, followed by N, thenF

    Launch the Folder Properties dialogbox.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F, followed by N, thenD

    Launch the Dimension Element dialogbox.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F, followed by N, thenT

    Launch the Derived Text Measuredialog box.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F, followed by N, thenL

    Launch the Text List dialog box.

    Ctrl+5, use arrow keys to navigate to appropriate location in the tree, Alt+F, followed by N, thenA

    Launch the Alias Set dialog box.

    Ctrl+5, use arrow keys to navigate to appropriate location in