Escorts JCB 3D

Embed Size (px)

Citation preview

  • 7/30/2019 Escorts JCB 3D

    1/2

    Escorts-JCB 3DNote:- Company has stopped manufacturing this

    model.

    The JCB 3D Excavator Loader can dig or load endlessly. It canperform operations like excavation, loading, dozing, grading,

    grabbing, backfilling, trenching, ditch cleaning and rock breakingand can also move on any terrain. It gives excellent all-round

    visibility to the operator, has a well-ventilated cabin and fatigue-free controls.

    SPECIFICATIONS

    EngineKirloskar 4R1040, four cylinder, water cooled diesel, delivering gross power of 57 KW (76HP) at 2200 RPM as per BS Au 141 a and net power of 53.8 KW (72 HP) at 2200 RPM(ISO 3046 IFN). Maximum net torque 29.5 kgm.

    Transmission

    JCB Syncroshuttle transmission incorporating Torque converter, reversing shuttle andsynchromesh 4 speed gearbox in one resiliently mounted unit. Electro-hydraulic direction

    control through a steering column mounted switch for forward/ reverse shuttling. Footpedal operated, transmission disconnect switch for on-the-move gear change. Torqueconverter stall ratio 2.83

    AxlesRear: Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioningdifferential, driven by short propshaft from gear box. Front: Steer axle, centrally pivoted,with oscillation angle of 10 degrees total (16 degrees for 4WD).

    Brakes

    Service: Hydraulically actuated, dual line, self adjusting, oil immersed, multidisc type onthe rear axle, well protected from dirt, water, etc., requiring no maintenance. Throughindependent pedal linked together for normal use. Parking: Hand-operated disc brake ongearbox output.

    SteeringFull power, front wheel hydrostatic power steering with manual capability in the event ofengine or hydraulic power failure. Hydraulic supply from pump via priority valve. Workingpressure 1750 psi (121 bar).

    Hydraulics3000 psi (207 Bar) system; Pump flow: 109 lpm at 2200 RPM. Filteration through suctionstrainer and return line `JCB Filtromati

    Overall length 6.11 mOverall height 3.54 mWheelbase 2.11 m (2.17 m for 4WD)Width (overbucket)

    2.43 m

    Track width -front

    1.80 m (1.82 for 4WD)

    Tread width -rear 1.71 m

    Speed (km/hr)Forward Reverse

    1st 2nd 3rd 4th 5.81 5.812nd 9.57 9.57

    3rd 4th 16.29 Not recommended4th 29.50 Not recommended

    Service Capacities

    Hydraulic system 110 L

  • 7/30/2019 Escorts JCB 3D

    2/2

    Fuel tank 85 LEngine coolant 15 LEngine oil 11 LAxle 25 LTransmission 21 L

    WeightShipping 6670 kg (With 2WD, Standard buckets)

    Options

    - Loader Buckets- 6-in-1 Clamshovel Bucket- Bucket Mounted Forklift- Jib Crane- Excavator Buckets- Ditch Cleaning Bucket- Taper Ditching Bucket- Square Hole Bucket- Rock Breaker

    - Ripper Tooth- JCB Telescopic Dipper- 4 Wheel Drive- Heavy Duty Rear Tyres- Tipping Lever-Speed (201 degrees)All dimensions, weights and timings are variable within 1.5 %EJCB reserves the right to change specifications without notice