8/17/2019 ESCO Nemisys

1/5

MINING LIP SYSTEM

ESCO NEMISYS™

8/17/2019 ESCO Nemisys

2/5

MORE PRODUCTIVE. SAFER.LESS MAINTENANCE.

ESCO products are t rusted at mines worldwide for productivity and safety. ESCO’s new

Nemisys™ Lip System is engineered to deliver these same benefits. A lighter weight

ip better sized to today’s machines and a streamlined profile optimizes production and

machine working cycles. The new hammerless tooth and shroud system helps reduce

maintenance costs through improved reliability, faster and safer replacement, and

mproved lip coverage.

ESCTRUSTED AT SAFE AN

PRODUCTIVE MINE

WORLDWID

NEMISYS™ LIP SYSTEM

Want to know more? 

http://www.youtube.com/embed/-0SHCOvTIvwhttp://www.youtube.com/embed/xe6PlJgh2io

8/17/2019 ESCO Nemisys

3/5

“Nemisys™ teeth are getting much better wear metalutilization compared to the previous system, whichmeans longer wear life and less throw-away metal.”

ESCO Product Manager 

THE BENEFITS OF UPGRADING TONEMISYS™ SYSTEMS

• Improved Productivity 

– Slim lip design and matching toothsystem require 10% less force topenetrate on average

– Teeth have up to 19% more useable wearmetal for more uptime

– Lips weigh 7% less on average toenable additional carrying capacity

Lock integrated inpoint

All new pointshapes

Slim nose profile

• Safer Field Replacement

– Entire system features hammerless locking

  – Cast-in lifting eyes simplify handling

•  Increased Reliability

  – Intermediate adapters feature dual lockingmechanisms for less movement

– Teeth maintain strength throughout the wear cycle

•  Reduced Maintenance Costs

  – Greater time between major lip rebuilds due to anaverage of 12% reduction in peak stresses in the lip

  – Shrouds direct material flow away from adapter horfor longer maintenance cycles

  – Adapters and points use the same locking device ado not require special removal tools

  – Locking devices are integral to both teeth andintermediate adapters

Inside view

Side view

Dual locks

 All claims concerning results and performance are based on field testing, laboratory testing or customer feedback and do not constitute a guaran

or warranty of any kind. The effects of installation procedures, operating conditions, material conditions, wear and tear, and maintenance can affe

 performance and are factors outside the control of ESCO.

8/17/2019 ESCO Nemisys

4/5

Eversharp Lip SystemNemisys Lip System

Shroud and adapter sides are contoured to protect the lip and adapter horn from

excessive wear. The Nemisys shrouds and adapters cover up to 77% more area on

the frontal lip edge than EverSharp® providing greater protection to the lip.

HINGE PINHammerlessShroud Locking Device

The Nemisys system offers a variety of point shapes to match digging conditions.

APPLICATION GUIDE

The Nemisys system is available in four sizes to better match machine break out force.

Rock Point“R”

Standard WearCap Point

“SW”

Standard Point“S”

Dragline Point“D”

Twin P“V”

NAMING CONVENTION

The Nemisys part marking identification (PMID) has been simplified.

Part S-Series Posilok ® PMID  New Nemisys PMI

Nose Size S110 N1

Heavy Duty Adapter S110H92K N1H

Wear Cap Adapter S110W92K N1W

Point Shape (Rock) 92KRML N1R

Tooth size Machine

Nemisys Posilok

(for reference)  Hi tac hi Ko matsu Bu cy ru s/CAT Liebh er r  

N1 S110/92K EX3600-6 PC4000 RH170B/6040 R9350-R994B

N3 S130/112K EX5500-6 PC5500 RH200/6050 R9400

N5 S130/122K RH340B/6060 R995

N7 S145/122K EX8000-6 PC8000 RH400/6090 R9800/R996B

Greater protection ofcritical front edge

Less protection ofcritical front edge

NEMISYS™ SHROUD SYSTEM NEMISYS™ TOOTH SYSTEM

8/17/2019 ESCO Nemisys

5/5

www.escocorp.com

  © ESCO Corporation. All Rights ReservedPMINL All other brand or product names are trademarks of their respective holders