Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
DESIGN + ENGINEERINGGROHE GERMANY
www.grohe.com
D Bedienungsanleitung............1 H Használati útmutató.......1051
GB Operating instructions........49 P Instruções de utilização..1126
F Notice D‘utilisation............145 TR Kullanma kılavuzu..........1201
RUS Инструкция по эксплуатации...................217
SK Návod na obsluhu...........1276
I Istruzioni per l'uso.............301 SLO Navodila za uporabo.......1351
NL Gebruikershandleiding.....376 HR Upute za uporabu...........1426
S Bruksanvisning.................451 BG Упътване за експлоатация................1501
DK Betjeningsvejledning........526 EST Kasutusjuhend...............1576
N Bruksanvisning.................601 LV Lietošanas instrukcija.....1651
FIN Käyttöohjeet.....................676 LT Naudojimo instrukcija.....1726
PL Instrukcja obsługi..............751 RO Manual de utilizare.........1801
UAE .........................................826 CN 操作指南 ...................1876
GR Oδηγίες χρήσης................901 UA Інструкція з експлуатації...................1951
CZ Návod k obsluze..............976 RUS Инструкция по эксплуатации.................2026
Bluetooth®
version 4.0
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Grohe AG is under license. Other trademarks and trade names are those of their respective owners.
for AndroidTM:min. 4“ Display OS: 4.3 and above
Apple: iPod® touch (5 th Generation), iPhone® 5, iPhone® 6, iPhone® 6 plus, iPad® mini, iPad® mini 2, iPad® mini 3, iPad® 2, iPad® 3, iPad® 4, iPad® Air, iPad® Air 2
iPod touch, iPhone, iPad and iTunes are Trademarks of Apple Inc., registered in the U.S. and other countries.
INT00005/ÄM 235247/04.16
������� ��� �
ein . . . . . . . . . . . . . . . . . . . . . . . . 5n . . . . . . . . . . . . . . . . . . . . . . . . . . 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Rubriken . . . . . . . . . . . . . . . . . . . . 7ungen . . . . . . . . . . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . 11g ändern. . . . . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . 14ülung . . . . . . . . . . . . . . . . . . . . . . 14hließzyklen . . . . . . . . . . . . . . . . . 14 (Waschtisch / Brause) . . . . . . . . 15
nfektion (Waschtisch / Brause) . . 15
Informationen allgemBetriebsbedingunge
Apple: . . . . . . . . AndroidTM:. . . .
Funktionsbereiche /VerbindungseinstellSynchronisation . . App-Übersicht . . . .
Erstinbetriebnahme Einstellungen . . . . Sprache einstellen AdapterbezeichnunPIN-Code ändern .
Monitoring . . . . . . . . Automatische SpÖffnungs- und ScWasserverbrauchThermische Desi
1Inhalt
. . . . . . . . . . . . . . . . . . . . . . . . . . . 16ren . . . . . . . . . . . . . . . . . . . . . . . . 16h . . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . . . . . . 17ülung . . . . . . . . . . . . . . . . . . . . . . 18s. . . . . . . . . . . . . . . . . . . . . . . . . . 20 sperren. . . . . . . . . . . . . . . . . . . . 20nfektion . . . . . . . . . . . . . . . . . . . . 21NDEN . . . . . . . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . 22ülung . . . . . . . . . . . . . . . . . . . . . . 23s. . . . . . . . . . . . . . . . . . . . . . . . . . 25 sperren. . . . . . . . . . . . . . . . . . . . 25nfektion . . . . . . . . . . . . . . . . . . . . 26NDEN . . . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . . . . . . . . . . . 28h . . . . . . . . . . . . . . . . . . . . . . . . . 28
Konfiguration . . . . . Waschtisch-Armatu
ErfassungsbereicNachlaufzeit . . . Maximallaufzeit. Automatische SpReinigungsmoduProgrammmodusThermische DesiKonfiguration SE
Brause-Armaturen Maximallaufzeit. Automatische SpReinigungsmoduProgrammmodusThermische DesiKonfiguration SE
Urinal-Armaturen . Erfassungsbereic
2Inhalt
it . . . . . . . . . . . . . . . . . . . . . . . . . 28. . . . . . . . . . . . . . . . . . . . . . . . . . . 29erdetektion . . . . . . . . . . . . . . . . . . 29. . . . . . . . . . . . . . . . . . . . . . . . . . . 29ülung . . . . . . . . . . . . . . . . . . . . . . 30s. . . . . . . . . . . . . . . . . . . . . . . . . . 32 sperren. . . . . . . . . . . . . . . . . . . . 33den . . . . . . . . . . . . . . . . . . . . . . . 33rmaturen. . . . . . . . . . . . . . . . . . . 34
. . . . . . . . . . . . . . . . . . . . . . . . . . . 34t der Spülung . . . . . . . . . . . . . . . . 34 . . . . . . . . . . . . . . . . . . . . . . . . . . 35ülung . . . . . . . . . . . . . . . . . . . . . . 35s. . . . . . . . . . . . . . . . . . . . . . . . . . 37den . . . . . . . . . . . . . . . . . . . . . . . 37. . . . . . . . . . . . . . . . . . . . . . . . . . . 38h . . . . . . . . . . . . . . . . . . . . . . . . . 38it . . . . . . . . . . . . . . . . . . . . . . . . . 38. . . . . . . . . . . . . . . . . . . . . . . . . . . 39
MindestverweilzeSpülmenge . . . . Spülung bei DauVorspülung . . . . Automatische SpReinigungsmoduProgrammmodusKonfiguration sen
Temperatur Urinal-ASpülmenge . . . . VerzögerungszeiZwischenspülungAutomatische SpReinigungsmoduKonfiguration sen
WC-Armaturen . . . ErfassungsbereicMindestverweilzeSpülmenge . . . .
3Inhalt
erdetektion . . . . . . . . . . . . . . . . . . 39bhängige Spülmenge. . . . . . . . . . 39. . . . . . . . . . . . . . . . . . . . . . . . . . . 40ülung . . . . . . . . . . . . . . . . . . . . . . 40s. . . . . . . . . . . . . . . . . . . . . . . . . . 42 sperren. . . . . . . . . . . . . . . . . . . . 43den . . . . . . . . . . . . . . . . . . . . . . . 43
. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . . . . . . . . . . . . . . . . . . 45nen . . . . . . . . . . . . . . . . . . . . . . . 45en . . . . . . . . . . . . . . . . . . . . . . . . 46t für Temperatur Urinal) . . . . . . . . 47eratur Urinal) . . . . . . . . . . . . . . . . 47n (WC / Urinal / l) . . . . . . . . . . . . . . . . . . . . . . . . . 47
. . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Spülung bei DauErfassungszeit aVorspülung . . . . Automatische SpReinigungsmoduProgrammmodusKonfiguration sen
Profile. . . . . . . . . . . . Sichern / laden . . .
Service . . . . . . . . . . . ServiceinformatioArmatur abschaltTestmodus (nichDiagnose (TempSpülung auslöseTemperatur UrinaReset . . . . . . . .
4Inhalt
llgemein
bei GROHE Bluetooth® -Armaturen
n ändern und Sonderfunktionen , einstellen und abrufen.
ner Armatur können in bis zu drei p (Waschtisch, Brause, WC, Urinal)
sen Bluetooth® -Version 4.0
ark and logos are registered Bluetooth SIG, Inc. and any use of AG is under license. Other names are those of their respective
Informationen a
Mit der App lassen sichdie Werkseinstellungeaktivieren, deaktivieren
Die Konfigurationen eiProfilen je Armaturentygesichert werden.
Mobile Endgeräte müsunterstützen.
The Bluetooth® word mtrademarks owned by such marks by Grohe trademarks and trade owners.
5Inhalt
en
eration), iPhone® 5, iPhone® 6, ® mini, iPad® mini 2,iPad® mini 3, d® 4, iPad® Air, iPad® Air 2
ad and iTunes are Trademarks of in the U.S. and other countries.
.0
öher
n der aktuellsten Version auf dem werden. Die App ist kostenlos im i Apple ist erforderlich) und im
Account bei Google ist erforderlich)
Betriebsbedingung
Apple:
• iPod® touch (5th GeniPhone® 6 plus, iPadiPad® 2, iPad® 3, iPa
• iOS Version ab 8.0iPod touch, iPhone, iPApple Inc., registered
AndroidTM:
• Bluetooth® Version 4• min. 4“ Display• OS Version 4.3 und h
Die App muss zuerst iBediengerät installiert iTunes (ein Account beGoogle Play store (einerhältlich.
6Inhalt
/ Rubriken
lungenerät muss aktiviert seinrfolgt automatisch über die Appindung ist der Bluetooth®
-Adapter nicht sichtbar
daten ohne PIN möglich sind nur nach PIN-Eingabe
rage über die App. Der PIN muss im iebnahme geändert werden!)
App werden alle im dlichen GROHE Bluetooth®
-i Auswahl eines Adapters erfolgt chronisation von Datum und Urzeit
Nutzungsdaten der Armatur werden
Funktionsbereiche • Monitoring• Konfiguration• Service
Verbindungseinstel• Bluetooth®
am Endg• Verbindungsaufbau e• Bei bestehender Verb
für weitere Endgeräte• Abruf von Armaturen• Einstellungsänderung
möglich• PIN-Code: 5555 (Abf
Verlauf der Erstinbetr
SynchronisationNach dem Starten derEmpfangsbereich befinAdapter aufgelistet. Beeine automatische Synmit dem Endgerät. Die
7Inhalt
in die App geladen.
u drei Profilen je Armaturentyp , WC, Urinal)
g editierbar)onfiguration / Service)
nsabhängig)
App-Übersicht
Profile
• Verwaltung von bis z(Waschtisch, Brause
Einstellungen
• Sprache• PIN
Auswahlfläche
• Adapter (Bezeichnun• Rubrik (Monitoring / K
Schaltfläche (funktio
8Inhalt
ndenblenden
ngen wird als Unterbrechung der nzeichnet
Rubrikenge Menü
Schalter
• Funktion ein- /ausble• Untermenü ein- / aus
Schieber für Einstellu• Die Werkseinstellung
Schieberleiste geken
Zurück
• Schließen geöffneter• Zurück in das vorheri
9Inhalt
hme
m mobilen Endgerät aktivieren.
die App zu starten.rtet, erscheint eine Startanimation.ich befindlichen GROHE erden auf dem Bildschirm mern der Adapter).
dapter auswählen.Adapter wird automatisch aufgebaut. t die Kontrollleuchte in der Sensorik Armatur und ein Wasserlauf wird
d automatisch erkannt. können abgerufen werden.
n Daten an den Adapter erfolgt eine e, werkseitig: 5555).uss der PIN geändert werden.scheint das Hauptmenü und die
Erstinbetriebna
Bluetooth®-Funktion a
App-Icon antippen, um• Während die App sta• Die im Empfangsbere
Bluetooth® -Adapter w
angezeigt (Seriennum
GROHE Bluetooth® -A
• Die Verbindung zum Zur Bestätigung blinkder entsprechenden ausgelöst.
• Der Armaturentyp wir• Armaturenparameter
Beim ersten Senden voPIN-Abfrage (PIN-Cod• Nach der Eingabe mAuf dem Bildschirm er
10Inhalt
Erstinbetriebnahme ist abgeschlossen.
lisch)
ungen öffnen.
einstellungen öffnen und uswählen.
ermenü für Spracheinstellungen
Einstellungen
Sprache einstellen(Werkseinstellung: Eng
Untermenü für Einstell
Untermenü für Sprachgewünschte Sprache a
Über „Zurück“ das Untverlassen.
11Inhalt
g ändern
rneut antippen.
ung eingeben und mit „Senden“
Adapterbezeichnun
Adapter auswählen.
Adapterbezeichnung e
Neue Adapterbezeichnbestätigen.
12Inhalt
ungen öffnen.
en und „Neuer PIN“ wählen.
eben.werden als „X X X X“ dargestellt.
euen PIN-Code erneut eingeben.werden als „X X X X“ dargestellt.gabe mit der Ersten überein,
h das Menü „Einstellungen“.
ermenü für Einstellungen verlassen.
PIN-Code ändern
Adapter auswählen.
Untermenü für Einstell
Untermenü für PIN öffn
Neuen PIN-Code eing• Eingegebene Ziffern
Zur Bestätigung den n• Eingegebene Ziffern • Stimmt die zweite Ein
erscheint automatisc
Über „Zurück“ das Unt
13Inhalt
g
hen Spülungen seit Inbetriebnahme
nächsten automatischen Spülung.ufzeit der letzten automatischen
ßzyklen
en seit Inbetriebnahme der Armatur.en seit Zurücksetzen des
ücksetzens.ngen seit Inbetriebnahme der
ngen innerhalb der letzten 30 Tage.tigung.
letzten 30 Tage (inklusive min- und
Monitoring
Automatische Spülun
Anzahl der automatiscder Armatur.Zeit in Minuten bis zurDatum, Uhrzeit und LaSpülung.
Öffnungs- und Schlie
Anzahl der BetätigungAnzahl der BetätigungNutzungszählers.Datum des letzten ZurMittelwert der BetätiguArmatur.Mittelwert der BetätiguDatum der letzten BetäGrafik mit Werten der
14Inhalt
max-Werten).
aschtisch / Brause)
inuten seit Inbetriebnahme der
tern seit Inbetriebnahme der
eglers.betriebnahme der Armatur.
tion (Waschtisch / Brause)
n Desinfektionen seit matur.n Desinfektionen seit Zurücksetzen
ücksetzens.ufzeit der letzten thermischen
Wasserverbrauch (W
Wasserverbrauch in MArmatur.Wasserverbrauch in LiArmatur.Durchfluss des StrahlrBetriebsstunden seit In
Thermische Desinfek
Anzahl der thermischeInbetriebnahme der ArAnzahl der thermischedes Nutzungszählers.Datum des letzten ZurDatum, Uhrzeit und LaDesinfektion.
15Inhalt
ren
onspunkte werden in einem atur gesendet.
ensorik ein Objekt erfasst. kann auch im Testmodus (nicht für gestellt werden (Menü Service).
Stufe 6 (12 cm)
rputz
Stufe 13 (25 cm)
KonfigurationWaschtisch-Armatu
Geänderte KonfiguratiDatensatz zu der Arm
Erfassungsbereich
Abstand, in dem die SDer ErfassungsbereichTemperatur Urinal) ein
Waschtisch
Stufe 0 (7 cm)Stufe 19 (20 cm)Werkseinstellung:
Waschtisch, Unte
Stufe 0 (15 cm)Stufe 19 (35 cm)Werkseinstellung:
16Inhalt
ostat
Stufe 15 (40 cm)
fassungsbereiches fließt Wasser für it weiter.
atisch nach der eingestellten Zeit nes Objektes (automatische g).ro Stufe 6 sro Stufe 60 s
Waschtisch Therm
Stufe 0 (20 cm)Stufe 19 (45 cm)Werkseinstellung:
NachlaufzeitNach Verlassen des Erdie eingestellte Laufze0 s19 sWerkseinstellung: 1 s
MaximallaufzeitArmatur schließt autombei Dauererfassung eiSicherheitsabschaltun6 s < 60 s: p420 s > 60 s: pWerkseinstellung: 60 s
17Inhalt
g
lung dient zur Sicherung der gerer Nichtnutzung der Armatur.
atischer Spülung freien Ablauf
r automatischen Spülung der erleitung muss sich die Armatur ng befinden!
g aktivieren/deaktivieren
aktivieren.
deaktivieren (Werkseinstellung).
ischen Spülung
s
Automatische Spülun
Die automatische SpüWasserhygiene bei län
Bei aktivierter automsicherstellen! Zur Durchführung deKalt- und Warmwassin Mischwasserstellu
Automatische Spülun
Automatische Spülung
Automatische Spülung
Laufzeit der automat
30 s600 sWerkseinstellung: 300
18Inhalt
ischen Spülung
e automatische Spülung wiederholt
td
chen Spülung
lauf des eingestellten Intervalls nach Armatur (Benutzungsabhängig).
lauf des eingestellten Intervalls ig). für die erste automatische Spülung.gen erfolgen im eingestellten
utzungsabhängig
Intervall der automat
Zeitabstand, in dem diwird.4 Std80 StdWerkseinstellung: 24 S
Modus der automatis
Armatur spült nach Abletzter Benutzung der
Armatur spült nach Ab(BenutzungsunabhängEinstellen der StartzeitAnschließende SpülunIntervall.
Werkseinstellung: Ben
19Inhalt
ngsmodus kann der Wasserlauf rden. Die Sperrung des Wasserlaufs sung an der Sensorik.tivieren/deaktivierenvieren.ktivieren (Werkseinstellung).
perrungg)
errenmmmodus kann das Programm
ung an der Sensorik geändert
odus aktivieren.odus deaktivieren
ReinigungsmodusBei aktiviertem Reinigukurzzeitig gesperrt weerfolgt durch NaherfasReinigungsmodus akReinigungsmodus aktiReinigungsmodus dea
Laufzeit der Wassers180 s (Werkseinstellun540 s
Programmmodus spBei gesperrtem Progranicht durch Naherfasswerden.Sperrung ProgrammmSperrung Programmm(Werkseinstellung).
20Inhalt
tion
hen Desinfektiong)
tion starten/stoppenostat auf Heißwasserendanschlag
dards sind zu beachten!on starten. thermische Desinfektion.on vor Ablauf der eingestellten
ischen Desinfektion (z.B. durch selt die Armatur in den
Nonspunkte werden in einem
Thermische Desinfek
Laufzeit der thermisc4 min (Werkseinstellun23 min
Thermische DesinfekMischhebel oder Thermdrehen. Nationale StanThermische DesinfektiDie Armatur startet dieThermische DesinfektiLaufzeit stoppen.
Bei Abbruch der ThermObjekterfassung) wechReinigungsmodus.
Konfiguration SENDEGeänderte Konfigurati
21Inhalt
Datensatz zu der Armatur gesendet.
onspunkte werden in einem atur gesendet.
atisch nach der eingestellten Zeit nes Objektes (automatische g).ro Stufe 6 sro Stufe 60 s
KonfigurationBrause-Armaturen
Geänderte KonfiguratiDatensatz zu der Arm
MaximallaufzeitArmatur schließt autombei Dauererfassung eiSicherheitsabschaltun6 s < 60 s: p420 s > 60 s: pWerkseinstellung: 60 s
22Inhalt
g
lung dient zur Sicherung der gerer Nichtnutzung der Armatur.
atischer Spülung freien Ablauf
g aktivieren/deaktivieren
aktivieren.
deaktivieren (Werkseinstellung).
ischen Spülung
s
Automatische Spülun
Die automatische SpüWasserhygiene bei län
Bei aktivierter automsicherstellen!
Automatische Spülun
Automatische Spülung
Automatische Spülung
Laufzeit der automat
30 s600 sWerkseinstellung: 300
23Inhalt
ischen Spülung
e automatische Spülung wiederholt
td
chen Spülung
lauf des eingestellten Intervalls nach Armatur (Benutzungsabhängig).
lauf des eingestellten Intervalls ig). für die erste automatische Spülung.gen erfolgen im eingestellten
utzungsabhängig
Intervall der automat
Zeitabstand, in dem diwird.4 Std80 StdWerkseinstellung: 24 S
Modus der automatis
Armatur spült nach Abletzter Benutzung der
Armatur spült nach Ab(BenutzungsunabhängEinstellen der StartzeitAnschließende SpülunIntervall.Werkseinstellung: Ben
24Inhalt
ngsmodus kann der Wasserlauf rden. Die Sperrung des Wasserlaufs sung an der Sensorik.tivieren / deaktivierenvieren.ktivieren (Werkseinstellung).
perrungg)
errenmmmodus kann das Programm
ung an der Sensorik geändert
odus aktivieren.odus deaktivieren
ReinigungsmodusBei aktiviertem Reinigukurzzeitig gesperrt weerfolgt durch NaherfasReinigungsmodus akReinigungsmodus aktiReinigungsmodus dea
Laufzeit der Wassers180 s (Werkseinstellun540 s
Programmmodus spBei gesperrtem Progranicht durch Naherfasswerden.Sperrung ProgrammmSperrung Programmm(Werkseinstellung).
25Inhalt
tion
bschalten.
ren.
hlüssel auf Maximal-Temperatur
n.
en Desinfektion einstellen. ig von der Wassertemperatur.
ind zu beachten!g)
on starten.
thermische Desinfektion.
on vor Ablauf der eingestellten
Thermische Desinfek
Mit der App Armatur a
Abdeckplatte demontie
Mit Grotherm Micro Scdrehen.
Abdeckplatte montiere
Laufzeit der thermischDie Laufzeit ist abhängNationale Standards s4 min (Werkseinstellun23 min
Thermische Desinfekti
Die Armatur startet die
Thermische Desinfekti
26Inhalt
Laufzeit stoppen.
ischen Desinfektion (z.B. durch die Armatur gesperrt.
ischen Desinfektion ist die Armatur haltet (Sensorik signalisiert
ren.
hlüssel auf voreingestellte B. 38 °C).
n.
e Armatur gesperrt (Sensorik n).
aumen für die Dauer von 10 sorik halten.
Nonspunkte werden in einem
Bei Abbruch der ThermObjekterfassung) wird
Nach Ablauf der thermfür 15 Minuten abgescDauerleuchten).
Abdeckplatte demontie
Mit Grotherm Micro ScTemperatur drehen (z.
Abdeckplatte montiere
Nach 15 Minuten ist disignalisiert Blinkzeiche
Armatur entsperren. DSekunden auf die Sen
Konfiguration SENDEGeänderte Konfigurati
27Inhalt
Datensatz zu der Armatur gesendet.
onspunkte werden in einem tur gesendet.
ensorik ein Objekt erfasst. kann auch im Testmodus (nicht für gestellt werden (Menü Service).
e 13 (45 cm)
n des Erfassungsbereiches vergeht, st.
KonfigurationUrinal-ArmaturenGeänderte KonfiguratiDatensatz zu der Arma
Erfassungsbereich
Abstand, in dem die SDer ErfassungsbereichTemperatur Urinal) einStufe 0 (20 cm)Stufe 19 (55 cm)Werkseinstellung: Stuf
Mindestverweilzeit
Zeit, die nach Verlassebis eine Spülung auslö2 s10 s
28Inhalt
Werkseinstellung: 5 s
tektion
nes Objektes erfolgt alle 2 min eine
ktion aktivieren (Werkseinstellung).ktion deaktivieren.
es Objektes erfolgt eine Spülung mit
n (Werkseinstellung).
Spülmenge
1 l7 lWerkseinstellung: 2 l
Spülung bei Dauerde
Bei Dauererfassung eiSpülung (max. 14x).Spülung bei DauerdeteSpülung bei Dauerdete
Vorspülung
2 s nach Erfassung einkleinster Spülmenge.Vorspülung aktivieren.Vorspülung deaktiviere
29Inhalt
g
lung dient zur Sicherung der gerer Nichtnutzung der Armatur.
g aktivieren / deaktivieren
aktivieren (Werkseinstellung). deaktivieren.
ischen Spülung
e automatische Spülung wiederholt
td
Automatische Spülun
Die automatische SpüWasserhygiene bei län
Automatische Spülun
Automatische SpülungAutomatische Spülung
Intervall der automat
Zeitabstand, in dem diwird.4 Std80 StdWerkseinstellung: 24 S
30Inhalt
chen Spülung
lauf des eingestellten Intervalls nach Armatur (Benutzungsabhängig).
lauf des eingestellten Intervalls ig).
für die erste automatische Spülung.
gen erfolgen im eingestellten
utzungsabhängig
Modus der automatis
Armatur spült nach Abletzter Benutzung der
Armatur spült nach Ab(Benutzungsunabhäng
Einstellen der Startzeit
Anschließende SpülunIntervall.
Werkseinstellung: Ben
31Inhalt
ngsmodus kann der Wasserlauf rden. Die Sperrung des Wasserlaufs sung an der Sensorik.
tivieren / deaktivieren
vieren (Werkseinstellung).ktivieren.
perrung
g)
Reinigungsmodus
Bei aktiviertem Reinigukurzzeitig gesperrt weerfolgt durch Naherfas
Reinigungsmodus ak
Reinigungsmodus aktiReinigungsmodus dea
Laufzeit der Wassers
180 s (Werkseinstellun540 s
32Inhalt
erren
mmmodus kann das Programm ung an der Sensorik geändert
odus aktivieren.odus deaktivieren
n Datensatz mit den aktuellen rmatur.
Programmmodus sp
Bei gesperrtem Progranicht durch Naherfasswerden.Sperrung ProgrammmSperrung Programmm(Werkseinstellung).
Konfiguration sendeDie App überträgt denEinstellungen an die A
33Inhalt
rmaturenonspunkte werden in einem tur gesendet.
r Spülungch einer Benutzung nicht ab, erfolgt ögerungszeit eine automatische
ec.
KonfigurationTemperatur Urinal-AGeänderte KonfiguratiDatensatz zu der Arma
Spülmenge
1 l7 lWerkseinstellung: 2 l
Verzögerungszeit deFällt die Temperatur nanach eingestellter VerzSpülung.3 sec.41 sec.Werkseinstellung: 15 s
34Inhalt
nspülung erfolgt bei Dauernutzung ülung.
ieren (Werkseinstellung).tivieren.
glung dient zur Sicherung der gerer Nichtnutzung der Armatur.
aktivieren (Werkseinstellung). deaktivieren.
ischen Spülunge automatische Spülung wiederholt
ZwischenspülungBei aktivierter Zwischealle 8 Minuten eine Sp
Zwischenspülung aktivZwischenspülung deak
Automatische SpülunDie automatische SpüWasserhygiene bei län
Automatische SpülungAutomatische Spülung
Intervall der automatZeitabstand, in dem diwird.4 Std80 Std
35Inhalt
Werkseinstellung: 24 Std
chen Spülung
lauf des eingestellten Intervalls nach Armatur (Benutzungsabhängig).
lauf des eingestellten Intervalls ig).
für die erste automatische Spülung.
gen erfolgen im eingestellten
utzungsabhängig
Modus der automatis
Armatur spült nach Abletzter Benutzung der
Armatur spült nach Ab(Benutzungsunabhäng
Einstellen der Startzeit
Anschließende SpülunIntervall.Werkseinstellung: Ben
36Inhalt
ngsmodus kann der Wasserlauf rden. Die Sperrung des Wasserlaufs sung an der Sensorik.
tivieren / deaktivieren
vieren (Werkseinstellung).ktivieren.
perrung
g)
n Datensatz mit den aktuellen rmatur.
Reinigungsmodus
Bei aktiviertem Reinigukurzzeitig gesperrt weerfolgt durch Naherfas
Reinigungsmodus ak
Reinigungsmodus aktiReinigungsmodus dea
Laufzeit der Wassers
180 s (Werkseinstellun540 s
Konfiguration sendeDie App überträgt denEinstellungen an die A
37Inhalt
onspunkte werden in einem tur gesendet.
ensorik ein Objekt erfasst.
e 13 (75 cm) kann auch im Testmodus (nicht für gestellt werden (Menü Service).
n des Erfassungsbereiches vergeht, st.
KonfigurationWC-ArmaturenGeänderte KonfiguratiDatensatz zu der Arma
Erfassungsbereich
Abstand, in dem die SStufe 0 (35 cm)Stufe 19 (95 cm)Werkseinstellung: StufDer ErfassungsbereichTemperatur Urinal) ein
Mindestverweilzeit
Zeit, die nach Verlassebis eine Spülung auslö2 s10 s
38Inhalt
Werkseinstellung: 5 s
tektion
nes Objektes erfolgt alle 60 min eine
ktion aktivieren (Werkseinstellung).ktion deaktivieren.
ngige Spülmenge
hängt die Spülmenge von der
: 3 l: eingestellte Spülmenge
Spülmenge
3 l9 lWerkseinstellung: 6 l
Spülung bei Dauerde
Bei Dauererfassung eiSpülung (max. 3x).Spülung bei DauerdeteSpülung bei Dauerdete
Erfassungszeit abhä
Bei aktivierter FunktionErfassungszeit ab.Erfassungszeit: < 60 sErfassungszeit: > 60 sFunktion aktivieren.
39Inhalt
Funktion deaktivieren (Werkseinstellung).
es Objektes erfolgt eine Spülung mit
n (Werkseinstellung).
glung dient zur Sicherung der gerer Nichtnutzung der Armatur.
g aktivieren / deaktivieren aktivieren (Werkseinstellung). deaktivieren.
ischen Spülunge automatische Spülung wiederholt
Vorspülung
2 s nach Erfassung einkleinster Spülmenge.Vorspülung aktivieren.Vorspülung deaktiviere
Automatische SpülunDie automatische SpüWasserhygiene bei län
Automatische SpülunAutomatische SpülungAutomatische Spülung
Intervall der automatZeitabstand, in dem diwird.4 Std80 Std
40Inhalt
Werkseinstellung: 24 Std
chen Spülung
lauf des eingestellten Intervalls nach Armatur (Benutzungsabhängig).
lauf des eingestellten Intervalls ig).
für die erste automatische Spülung.
gen erfolgen im eingestellten
utzungsabhängig
Modus der automatis
Armatur spült nach Abletzter Benutzung der
Armatur spült nach Ab(Benutzungsunabhäng
Einstellen der Startzeit
Anschließende SpülunIntervall.
Werkseinstellung: Ben
41Inhalt
ngsmodus kann der Wasserlauf rden. Die Sperrung des Wasserlaufs sung an der Sensorik.
tivieren / deaktivieren
vieren (Werkseinstellung).ktivieren.
perrung
g)
Reinigungsmodus
Bei aktiviertem Reinigukurzzeitig gesperrt weerfolgt durch Naherfas
Reinigungsmodus ak
Reinigungsmodus aktiReinigungsmodus dea
Laufzeit der Wassers
180 s (Werkseinstellun540 s
42Inhalt
erren
mmmodus kann das Programm ung an der Sensorik geändert
odus aktivieren.odus deaktivieren
n Datensatz mit den aktuellen rmatur.
Programmmodus sp
Bei gesperrtem Progranicht durch Naherfasswerden.
Sperrung ProgrammmSperrung Programmm(Werkseinstellung).
Konfiguration sendeDie App überträgt denEinstellungen an die A
43Inhalt
ner Armatur können in bis zu drei p (Waschtisch, Brause, WC, Urinal, ichert werden.
chern“ und „Laden“ werden
ens Profil erneut antippen.n.
ter-Einstellungen aufrufen.
nü für Profile verlassen.
e Konfiguration an die Armatur
Profile
Sichern / laden
Die Konfigurationen eiProfilen je ArmaturentyTemperatur Urinal) ges
Adapter auswählen.
Menü Profile öffnen.Profil auswählen.• Die Schaltflächen „Si
eingeblendet.• Zum Ändern des NamKonfiguration speicher
Gespeicherte Parame
Über „Zurück“ das Me
Mit dem Profil geladen
44Inhalt
senden.
MIXER (Waschtisch) / BASIN ch Thermostat) / Shower (Brause) /
ERATUR URINAL
Softwareversion
etooth® -Adapters
hr der Produktion des Bluetooth® -
unterbrechungen seit matur.
Service
Serviceinformationen
Armaturentyp: BASIN MIXER THM (WaschtisWC / URINAL / TEMP
Laufende Nummer der
Seriennummer des Blu
Kalenderwoche und JaAdapters
Anzahl der SpannungsInbetriebnahme der Ar
45Inhalt
haltet und die Sensorik signalisiert
alten.
abschalten.
r die die Armaturenabschaltung.
nster definiert werden.
alten bestätigen.
Armatur abschalten
Armatur abschalten.Die Armatur ist abgescBlinkzeichen.
Armatur wieder einsch
Armatur zeitgesteuert
Einstellen der Dauer fü
Es können zwei Zeitfe
Zeitgesteuertes Absch
46Inhalt
Temperatur Urinal) Erfassungsbereich ohne fließendes Wasserfluss wird durch Leuchten er Sensorik simuliert.
größern.
kleinern.
r Urinal)
die entsprechende Komponente
C / Urinal / Temperatur Urinal)
e Spülung mit der voreingestellten
Testmodus (nicht für Im Testmodus wird derWasser überprüft. Derder Kontrollleuchte in dTestmodus starten.
Erfassungsbereich ver
Erfassungsbereich ver
Testmodus stoppen.
Diagnose (Temperatu
Bei Status „defekt“ ist auszutauschen.
Spülung auslösen (W
Spülung auslösen.Die Armatur startet ein
47Inhalt
Spülmenge.
ederherstellen.
en.
en.
tätigungen und thermische tzen.en.
en.
ungen und thermische nicht verändert.
Reset
Werkseinstellungen wi
Zurücksetzen bestätig
Zurücksetzen abbrech
Nutzungszähler für BeDesinfektion zurückseZurücksetzen bestätig
Zurücksetzen abbrech
Zähler total für BetätigDesinfektionen werden
48Inhalt
. . . . . . . . . . . . . . . . . . . . . . . . . . . 53s. . . . . . . . . . . . . . . . . . . . . . . . . . 54. . . . . . . . . . . . . . . . . . . . . . . . . . . 54. . . . . . . . . . . . . . . . . . . . . . . . . . . 54ategories . . . . . . . . . . . . . . . . . . . 55 . . . . . . . . . . . . . . . . . . . . . . . . . . 55. . . . . . . . . . . . . . . . . . . . . . . . . . . 55. . . . . . . . . . . . . . . . . . . . . . . . . . . 56
. . . . . . . . . . . . . . . . . . . . . . . . . . . 58
. . . . . . . . . . . . . . . . . . . . . . . . . . . 59
. . . . . . . . . . . . . . . . . . . . . . . . . . . 59 adapter . . . . . . . . . . . . . . . . . . . 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . 62g . . . . . . . . . . . . . . . . . . . . . . . . . 62 cycles . . . . . . . . . . . . . . . . . . . . 62
on (wash basin / shower). . . . . . . 63ion (wash basin / shower) . . . . . . 63
General information Operating condition
Apple: . . . . . . . . AndroidTM:. . . .
Functional areas / cConnection settingsSynchronization . . App-overview . . . .
Initial start-up . . . . . Settings. . . . . . . . . Language . . . . . . . Change name of theChange PIN-Code
Monitoring . . . . . . . . Automatic flushinOpen and closingWater consumptiThermal disinfect
49Content
. . . . . . . . . . . . . . . . . . . . . . . . . . . 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . 65g time . . . . . . . . . . . . . . . . . . . . . . 65g . . . . . . . . . . . . . . . . . . . . . . . . . 66. . . . . . . . . . . . . . . . . . . . . . . . . . . 68de . . . . . . . . . . . . . . . . . . . . . . . . 68ion . . . . . . . . . . . . . . . . . . . . . . . . 69ion . . . . . . . . . . . . . . . . . . . . . . . . 69. . . . . . . . . . . . . . . . . . . . . . . . . . . 70g time . . . . . . . . . . . . . . . . . . . . . . 70g . . . . . . . . . . . . . . . . . . . . . . . . . 71. . . . . . . . . . . . . . . . . . . . . . . . . . . 73de . . . . . . . . . . . . . . . . . . . . . . . . 73ion . . . . . . . . . . . . . . . . . . . . . . . . 74ion . . . . . . . . . . . . . . . . . . . . . . . . 75. . . . . . . . . . . . . . . . . . . . . . . . . . . 76. . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Configuration . . . . . Wash basin fittings
Detection zone . Run-on time . . . Maximum runninAutomatic flushinCleaning mode . Lock program moThermal disinfectSEND configurat
Shower fittings . . . Maximum runninAutomatic flushinCleaning mode . Lock program moThermal disinfectSEND configurat
Urinal fittings . . . . . Detection zone .
50Content
. . . . . . . . . . . . . . . . . . . . . . . . . . . 76
. . . . . . . . . . . . . . . . . . . . . . . . . . . 77tinuous detection . . . . . . . . . . . . . 77. . . . . . . . . . . . . . . . . . . . . . . . . . . 77g . . . . . . . . . . . . . . . . . . . . . . . . . 78. . . . . . . . . . . . . . . . . . . . . . . . . . . 80de . . . . . . . . . . . . . . . . . . . . . . . . 81n . . . . . . . . . . . . . . . . . . . . . . . . . 81 . . . . . . . . . . . . . . . . . . . . . . . . . . 82
. . . . . . . . . . . . . . . . . . . . . . . . . . . 82hing . . . . . . . . . . . . . . . . . . . . . . . 82
hing . . . . . . . . . . . . . . . . . . . . . . . 83g . . . . . . . . . . . . . . . . . . . . . . . . . 83. . . . . . . . . . . . . . . . . . . . . . . . . . . 85n . . . . . . . . . . . . . . . . . . . . . . . . . 85. . . . . . . . . . . . . . . . . . . . . . . . . . . 86. . . . . . . . . . . . . . . . . . . . . . . . . . . 86. . . . . . . . . . . . . . . . . . . . . . . . . . . 86. . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Minimum delay . Flush volume . . Flush during conPre-flush . . . . . . Automatic flushinCleaning mode . Lock program moSend configuratio
Temp.-Urinal fittingsFlush volume . . Delay time of flusIntermediate flusAutomatic flushinCleaning mode . Send configuratio
WC fittings . . . . . . Detection zone . Minimum delay . Flush volume . .
51Content
tinuous detection . . . . . . . . . . . . . 87pendable flush volume . . . . . . . . 87. . . . . . . . . . . . . . . . . . . . . . . . . . . 88g . . . . . . . . . . . . . . . . . . . . . . . . . 88. . . . . . . . . . . . . . . . . . . . . . . . . . . 90de . . . . . . . . . . . . . . . . . . . . . . . . 91n . . . . . . . . . . . . . . . . . . . . . . . . . 91
. . . . . . . . . . . . . . . . . . . . . . . . . . . 92
. . . . . . . . . . . . . . . . . . . . . . . . . . . 92
. . . . . . . . . . . . . . . . . . . . . . . . . . . 93on. . . . . . . . . . . . . . . . . . . . . . . . . 93. . . . . . . . . . . . . . . . . . . . . . . . . . . 94r temp.-urinal) . . . . . . . . . . . . . . . 95.-Urinal) . . . . . . . . . . . . . . . . . . . . 95WC, urinal and temp.-urinal) . . . . 95. . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Flush during conDetection time dePre-flush . . . . . . Automatic flushinCleaning mode . Lock program moSend configuratio
Profiles. . . . . . . . . . . Save / load . . . . . .
Service . . . . . . . . . . . Service informatiSwitch off fitting Testmode (not foDiagnose (TempTrigger flushing (Reset . . . . . . . .
52Content
tion
GROHE Bluetooth® -fittings can be
unctions can be activated, sing the App.
fitting can be saved in up to three g (Basin mixer, shower, WC, urinal).
o support Bluetooth® -version 4.0.
ark and logos are registered Bluetooth SIG, Inc. and any use of AG is under license. Other names are those of their respective
General informa
The factory settings ofchanged and special fdeactivated and set u
The configurations of aprofiles per type of fittin
Mobile Devices need t
The Bluetooth® word mtrademarks owned by such marks by Grohe trademarks and trade owners.
53Content
s
e 5/ 5c/ 5s, iPad mini/ mini 2/ mini 3 Air 2her
ad and iTunes are Trademarks of in the U.S. and other countries.
.0
up to 5.x
f the app must be installed on the . ailable for free in the iTunes Store ount) and the Google Play store ount).
Operating condition
Apple:• iPod touch 5g, iPhon
and iPad 2/ 3/ 4/ Air/ • iOS version 8.0 or higiPod touch, iPhone, iPApple Inc., registered
AndroidTM:
• Bluetooth® version 4• min. 4“ display• OS version from 4.3
The current version ocontrol unit in advanceThe required App is av(requires an Apple acc(requires a Google acc
54Content
ategories
s
ctivated at the mobile devicetablished automatically by the App
cted, the Bluetooth®-adapter is not sta is possible without PINre only possible after entering a PINry by the App. The PIN must be itial start-up!)
ll GROHE Bluetooth® -adapters
n area will be listed. When selecting me will automatically be e mobile device. The usage data of
Functional areas / c• Monitoring• Configuration• Service
Connection setting
• Bluetooth® must be a
• Connection will be es
• When already connevisible to other device
• Retrieval of fittings da• Changes of settings a• PIN-code: 5555 (Que
changed during the in
Synchronization
After starting the App alocated in the detectioan adapter, date and tisynchronizised with th
55Content
the fitting will be loaded to the App.
profiles per type of fitting , WC, urinal)
le) / configuration / service)
n the function)
App-overview
Profiles
• Managing up to three(Basin mixer, shower
Settings
• Language• PIN
Selection fields
• Adapter (name editab• Categorie (monitoring
Button (depending o
56Content
nss
marked as an gap in the slider bar
enu level
Switch
• Switch on / off functio• Show / hide submenu
Slider for settings• The factory setting is
Back button
• Close open categorie• Return to the higher m
57Content
nction at the mobile device.
t the App.ting an animation screen will be
® -adapters located in the detection
rial numbers of the adapters).
ooth® -adapter.
tablished automatically. indicator light in the sensor field of ing flashes yellow and a water flush
ill be detected automatically.e fitting can be retrieved.
the adapter for the first time a PIN code, factory setting: 5555). for the first time the code needs to
g has been finished the main menu
Initial start-up
Activate Bluetooth®-fu
Touch App-Icon to star• While the App is star
shown.• All GROHE Bluetooth
area will be listed (se
Choose GROHE Bluet• Connection will be es
For confirmation the the corresponding fittis started.
• The type of the fittig w• The parameters of th
While sending data to entry is required (PIN-• After entering the PIN
be changed.After the commissionin
58Content
appears on the screen.
h)
s.
guage and select preferred
guage setting.
Settings
Language(factory setting: englis
Open menu for setting
Open submenu for lanlanguage.
Leave submenu for lan
59Content
e adapter
gain.
nd confirm.
Change name of th
Choose adapter.
Touch adapter name a
Enter the new name a
60Content
tings.
and choose „New PIN“.
shown as „X X X X“.
w PIN-code again. shown as „X X X X“.ch the menu „settings“ appears on
ttings.
Change PIN-Code
Choose adapter.
Open submenu for set
Open submenu for PIN
Enter new PIN-code.• Entered digits will be
To confirm enter the ne• Entered digits will be• If the two entries mat
the screen.
Leave submenu for se
61Content
lushings since the fitting was
es since the last automatic flushing. of the last automatic flushing.
cles
since the fitting was commissioned.since the user counter was reset.
ns since the fitting was
ns since the last 30 days.ion.s of the last 30 days (including min
Monitoring
Automatic flushing
Number of automatic fcommissioned.Time elapsed in minutDate, time und runtime
Open and closing cy
Number of actuations Number of actuations Date of the last reset.Mean value of actuatiocommissioned.Mean value of actuatioDate of the last actuatGraphic with the valueand max values).
62Content
wash basin / shower)
minutes since the fitting was
liters since the fitting was
ener. the fitting was commissioned.
(wash basin / shower)
infections since the fitting was
infections since the user counter
of the last thermal disinfection.
Water consumption (
Water consumption in commissioned.Water consumption in commissioned.Flow rate flow straightOperating hours since
Thermal disinfection
Number of thermal discommissioned.Number of thermal diswas reset.Date of the last reset.Date, time and runtime
63Content
items are sent to the fitting in one
the sensor system detects an object.n also be set in Testmode (not for
vel 6 (12 cm)
ncealed installation
ConfigurationWash basin fittingsChanged configurationdata record.
Detection zone
Distance within which The detection zone catemp.-urinal) (Service menu).
Wash basin
Level 0 (7 cm)Level 19 (20 cm)Factory setting: Le
Wash basin for co
Level 0 (15 cm)Level 19 (35 cm)
64Content
Factory setting: Level 13 (25 cm)
ostat
vel 15 (40 cm)
e is left, water continues to run for esponding to the run-on time setting.
e
ically after an amount of time etting during continuous detection of afety shut-off).er level 6 ser level 60 s
Wash basin therm
Level 0 (20 cm)Level 19 (45 cm)Factory setting: Le
Run-on time
After the detection zonan amount of time corr0 s19 sFactory setting: 1 s
Maximum running tim
Fitting closes automatcorresponding to the san object (automatic s6 s < 60 s: p420 s > 60 s: pFactory setting: 60 s
65Content
ves to ensure water hygiene in the -utilisation of the fitting.
when automatic flushing is
g of the hot and cold water lines, the mixed water setting!
automatic flushing
hing.
lushing (factory setting).
atic flushing
Automatic flushing
Automatic flushing serevent of long-term non
Ensure free drainageactivated! For automatic flushinthe fitting must be in
Activate / deactivate
Activate automatic flus
Deactivate automatic f
Runtime of the autom
30 s600 sFactory setting: 300 s
66Content
flushing
utomatic flushing is repeated.
ode
setting, the fitting flushes after the sage-dependent).
interval in the setting (usage-
r the first automatic flushing.lushings will be made at the set
-dependent
Interval of automatic
Interval at which the a4 h80 hFactory setting: 24 h
Automatic flushing m
After the interval in thelast use of the fitting (u
Fitting flushes after theindependent).Setting the start time foThereafter automatic finterval.
Factory setting: Usage
67Content
ivated, water flow can be locked g of the water flow works through e sensor system.
cleaning modee.ode (factory setting).
lock
ed, the program cannot be modified
e locking.ode locking (factory setting).
Cleaning modeIf cleaning mode is acttemporarily. The lockinproximity sensing on thActivate / deactivate Activate cleaning modDeactivate cleaning m
Runtime of the water180 s (factory setting)540 s
Lock program modeIf program mode is lockby the sensor system.Activate program modDeactivate program m
68Content
isinfection
infection thermostat to the hot water stop.st be observed!on.al disinfection.on before the end of the runtime in
fection will be interrupted (eg etection) the fitting will switch into
items are sent to the fitting in one
Thermal disinfection
Runtime of thermal d4 min (factory setting)23 min
Start/stop thermal disTurn the mixer lever orNational standards muStart thermal disinfectiThe fitting starts thermStop thermal disinfectithe setting.
When the thermal disinbecause of an objekt dthe cleaning mode.
SEND configurationChanged configuration
69Content
data record.
items are sent to the fitting in one
e
ically after an amount of time etting during continuous detection of afety shut-off).er level 6 ser level 60 s
ConfigurationShower fittings
Changed configurationdata record.
Maximum running tim
Fitting closes automatcorresponding to the san object (automatic s6 s < 60 s: p420 s > 60 s: pFactory setting: 60 s
70Content
ves to ensure water hygiene in the -utilisation of the fitting.
when automatic flushing is
automatic flushing
hing.
lushing (factory setting).
atic flushing
Automatic flushing
Automatic flushing serevent of long-term non
Ensure free drainageactivated!
Activate / deactivate
Activate automatic flus
Deactivate automatic f
Runtime of the autom
30 s600 sFactory setting: 300 s
71Content
flushing
utomatic flushing is repeated.
ode
setting, the fitting flushes after the sage-dependent).
interval in the setting (usage-
r the first automatic flushing.lushings will be made at the set
-dependent
Interval of automatic
Interval at which the a4 h80 hFactory setting: 24 h
Automatic flushing m
After the interval in thelast use of the fitting (u
Fitting flushes after theindependent).Setting the start time foThereafter automatic finterval.Factory setting: Usage
72Content
ivated, water flow can be locked g of the water flow works through e sensor system.
cleaning modee.ode (factory setting).
lock
ed, the program cannot be modified
e locking.ode locking (factory setting).
Cleaning modeIf cleaning mode is acttemporarily. The lockinproximity sensing on thActivate / deactivate Activate cleaning modDeactivate cleaning m
Runtime of the water180 s (factory setting)540 s
Lock program modeIf program mode is lockby the sensor system.Activate program modDeactivate program m
73Content
e app.
cro key to the maximum temperatur.
hermal disinfection. on water temperature. st be observed!
on.
al disinfection.
on before the end of the runtime is
Thermal disinfection
Switch off fitting with th
Take off shower plate.
Turn with Grotherm Mi
Install shower plate.
Adjust runtime of the tThe runtime depends National standards mu4 min (factory setting)23 min
Start thermal disinfecti
The fitting starts therm
Stop thermal disinfectireached.
74Content
fection will be interrupted (eg etection) the fitting will be switched
ection procedure the fitting is utes (the sensor system indicates a
cro key to the set temperature (eg
tting is locked (the sensor system nal).
mb in front of the sensor system for ds.
items are sent to the fitting in one
When the thermal disinbecause of an objekt doff.
After the thermal disinfswitched off for 15 mincontinuous light).
Take off shower plate.
Turn with Grotherm Mi38 °C).
Install shower plate.
After 15 minutes the fiindicates a flashing sig
Unlock fitting. Hold thua duration of 10 secon
SEND configurationChanged configuration
75Content
data record.
items are sent to the fitting in a data
the sensor system detects an object.n also be set in Testmode (not for
13 (45 cm)
een when the detection zone is left .
ConfigurationUrinal fittingsChanged configurationrecord.
Detection zone
Distance within which The detection zone catemp.-urinal) (Service menu).Level 0 (20 cm)Level 19 (55 cm)Factory setting: Level
Minimum delayTime that elapses betwand a flush is triggered2 s10 s
76Content
ous detection
ction of an object, a flushing occurs ).
ontinuous detection (factory setting). continuous detection.
etected, a flushing with the smallest
actory setting).
Factory setting: 5 s
Flush volume
1 l7 lFactory setting: 2 l
Flush during continu
During continuous deteevery 2 min (max. 14 xActivate flush during cDeactivate flush during
Pre-flush
2 s after an object is dflow volume occurs.Activate pre-flush.Deactivate pre-flush (f
77Content
ves to ensure water hygiene in the -utilisation of the fitting.
automatic flushing
hing.lushing (factory setting).
flushing
utomatic flushing is repeated.
Automatic flushing
Automatic flushing serevent of long-term non
Activate / deactivate
Activate automatic flusDeactivate automatic f
Interval of automatic
Interval at which the a4 h80 hFactory setting: 24 h
78Content
ode
setting, the fitting flushes after the sage-dependent).
interval in the setting (usage-
r the first automatic flushing.
lushings will be made at the set
-dependent
Automatic flushing m
After the interval in thelast use of the fitting (u
Fitting flushes after theindependent).
Setting the start time fo
Thereafter automatic finterval.
Factory setting: Usage
79Content
ivated, water flow can be locked g of the water flow works through e sensor system.
cleaning mode
e (factory setting).ode.
lock
Cleaning mode
If cleaning mode is acttemporarily. The lockinproximity sensing on th
Activate / deactivate
Activate cleaning modDeactivate cleaning m
Runtime of the water
180 s (factory setting)540 s
80Content
ed, the program cannot be modified
e locking.ode locking (factory setting).
data record with the current settings
Lock program mode
If program mode is lockby the sensor system.Activate program modDeactivate program m
Send configurationThe App transfers the to the fitting.
81Content
s items are sent to the fitting in a data
gs not decrease after use, a flushing lly after a setted delay time.
.
ConfigurationTemp.-Urinal fittingChanged configurationrecord.
Flush volume
1 l7 lFactory setting: 2 l
Delay time of flushinIf the temperature doetakes place automatica3 sec.41 sec.Factory setting: 15 sec
82Content
nspülung erfolgt bei Dauernutzung ülung.lushing (factory setting).lushing.
ves to ensure water hygiene in the -utilisation of the fitting.hing.lushing (factory setting).
flushing
utomatic flushing is repeated.
Intermediate flushingBei aktivierter Zwischealle 8 Minuten eine SpActivate intermediate fActivate intermediate f
Automatic flushing
Automatic flushing serevent of long-term nonActivate automatic flusDeactivate automatic f
Interval of automatic
Interval at which the a4 h80 h
83Content
Factory setting: 24 h
ode
setting, the fitting flushes after the sage-dependent).
interval in the setting (usage-
r the first automatic flushing.
lushings will be made at the set
-dependent
Automatic flushing m
After the interval in thelast use of the fitting (u
Fitting flushes after theindependent).
Setting the start time fo
Thereafter automatic finterval.Factory setting: Usage
84Content
ivated, water flow can be locked g of the water flow works through e sensor system.
cleaning mode
e (factory setting).ode.
lock
data record with the current settings
Cleaning mode
If cleaning mode is acttemporarily. The lockinproximity sensing on th
Activate / deactivate
Activate cleaning modDeactivate cleaning m
Runtime of the water
180 s (factory setting)540 s
Send configurationThe App transfers the to the fitting.
85Content
items are sent to the fitting in a data
the sensor system detects an object.n also be set in Testmode (not for
13 (75 cm)
een when the detection zone is left .
ConfigurationWC fittingsChanged configurationrecord.
Detection zone
Distance within which The detection zone catemp.-urinal) (Service menu).Level 0 (35 cm)Level 19 (95 cm)Factory setting: Level
Minimum delay
Time that elapses betwand a flush is triggered2 s
86Content
10 s
ous detection
ction of an object, a flushing occurs ).
ontinuous detection (factory setting). continuous detection.
dable flush volume
ted, the flush volume depends on
3 l flush volume according to setting
Factory setting: 5 s
Flush volume
3 l9 lFactory setting: 6 l
Flush during continu
During continuous deteevery 60 min (max. 3 xActivate flush during cDeactivate flush during
Detection time depen
If the function is activathe detection time.Detection time: < 60 s:Detection time: > 60 s:
87Content
ctory setting).
etected, a flushing with the smallest
actory setting).
ves to ensure water hygiene in the -utilisation of the fitting.
automatic flushinghing.lushing (factory setting).
flushing
Activate function.Deactivate function (fa
Pre-flush
2 s after an object is dflow volume occurs.Activate pre-flush.Deactivate pre-flush (f
Automatic flushing
Automatic flushing serevent of long-term non
Activate / deactivate Activate automatic flusDeactivate automatic f
Interval of automatic
88Content
utomatic flushing is repeated.
ode
setting, the fitting flushes after the sage-dependent). interval in the setting (usage-
r the first automatic flushing.
lushings will be made at the set
-dependent
Interval at which the a4 h80 hFactory setting: 24 h
Automatic flushing m
After the interval in thelast use of the fitting (uFitting flushes after theindependent).
Setting the start time fo
Thereafter automatic finterval.
Factory setting: Usage
89Content
ivated, water flow can be locked g of the water flow works through e sensor system.
cleaning mode
e (factory setting).ode.
lock
Cleaning mode
If cleaning mode is acttemporarily. The lockinproximity sensing on th
Activate / deactivate
Activate cleaning modDeactivate cleaning m
Runtime of the water
180 s (factory setting)
540 s
90Content
ed, the program cannot be modified
e locking.ode locking (factory setting).
data record with the current settings
Lock program mode
If program mode is lockby the sensor system.
Activate program modDeactivate program m
Send configuration
The App transfers the to the fitting.
91Content
fitting can be saved in up to three g (Basin mixer, shower, WC, urinal,
SAVE“ and „LOAD“ will be shown.e choose profile again.
of the fitting.
s.
aded by the profile) to the fitting.
Profiles
Save / load
The configurations of aprofiles per type of fittintemp. urinal).
Choose adapter.
Open menu „Profile“.Choose profile.• The selection fields „• For changing the namSave the configuration
Load saved profile.
Leave menu for profile
Send configuration (lo
92Content
IXER (wash basin) / BASIN MIXER ostat) / SHOWER / WC / URINAL /
the software version
the Bluetooth® -Adapter
ar of production of the infrared
since the fitting was commissioned.
Service
Service information
Type of fitting: BASIN MTHM (wash basin thermTEMP.-URINAL
Sequential number of
Sequential number of
Calendar week and yeelectronics
Number of power cuts
93Content
off, and the sensor system produces
ontrolled.
r switching off the fitting.
ed.
ime-controlled.
Switch off fitting
Switch off fitting.The fitting is switched a flashing signal.
Switch fitting back on.
Switch off fitting time-c
Setting the duration fo
Two slots can be defin
Confirm switching off t
94Content
p.-urinal)tection zone is tested without
er flow is simulated by lighting the ensor system.
e.
.
al)
fective“, the relevant componet must
, urinal and temp.-urinal)
Testmode (not for temIn the test mode the deflowing water. The watindicator lamp in the s
Start test mode.
Increase detection zon
Reduce detection zone
Stop test mode.
Diagnose (Temp.-Urin
If the status shows „debe replaced.
Trigger flushing (WC
Trigger flushing.
95Content
The fitting starts a flushing with the preset flow volume.
s.
r actuations and thermal disinfection.
ctuations and thermal disinfections
Reset
Restore factory setting
Confirm reset.
Cancel reset.
Reset use counters fo
Confirm reset.
Cancel reset.
The counter total for aare not modified.
96Content