WHEN YOU NEED IT NOW!

Eriez has identified those products most often ordered with fast shipment requirements. The EriezXpress (Eriez Express) program stream-lines the order-to-shipment process by simplify-ing product ordering, modifying inventory con-trol and designating a dedicated team to make it all happen.

Upon credit approval, orders received by 4:00 p.m. EST will be processed and shipped the next business day for select Eriez products,

including plate magnets, grates, traps, small coolant cleaners and lifting magnets, as well as high speed vibratory feeders, bin vibrators and magnetic rolls.

When you need help with a product purity, con-trolling or conveying problem and you need it now, EriezXpress is the answer. Another inno-vative solution …Only from Eriez.

Can’t wait for a solutionto a challenging

processing problem?The most popular Eriez

products are now ready for next-day shipment through the unique

EriezXpressTM program.

B-45X

• All products shippable by air freight, if required to help keep production lines moving

• All products in stock – always for unexpected processing needs

• Product information available online at www.eriez.com to help you make the right selection

O N LY F R O M E R I E Z

FEATURES & BENEFITS

TM

2

AVAILABLE NOW!

VIBRATORY FEEDERS15A With 4x20 TrayThis in-stock feeder, the smallest in its cat-egory, is run on 115V, 60, and includes 4x20 SS Tray. This feeder will give precise feeding of the most minute amounts and up to 40 cu ft/hr of materials.

36C With 10x24 TrayThis feeder is ready for shipping. Includes 10x24 SS Tray and runs on 115V/60Hz. Just wire into AC line. A full-feed range is provided by a solid state control.

58B With 14x36 TrayThis feeder is ready for shipping. Includes 14x36 MS Tray.

CONTROLSUniCon UN-115-2A-FWStandard HI-Vi Feeder Controller. Depending on the feeder to which it's connected, varying the applied line voltage from zero to to 100% allows precise feeding from a few ounces to several tons per hour. Operates at 115V input/115V output 2 amps. Housed in a NEMA 12 enclosure.

UniCon UN-115-6A-FWHI-VI Feeder Control. This AC Feeder Control operates at 115V input/115V output 6 amps. This model is housed in a NEMA-12 enclosure.

UniCon UN-115-15A-FWHI-VI Feeder Control. This AC Feeder Control operates at 115V input/115V output 15 amps. This model is housed in a NEMA-12 housing.

COOLANT CLEANERModel CS 5-7Flow rates up to 21 GPM (79 LPM). Maximum flow rate applies to water soluble coolant. For use where little or no non-magnetic material is contaminating the coolant. The roll's power-ful permanent magnetic field reaches out and captures ferrous contamination in the fluid.

3

SUSPENDED PERMANENT MAGNETModel SP6330Removes large pieces of tramp metal from 30-inch (762 mm) (maximum) conveyors at 8 in. (203 mm) (max.). Measures 10 x 24 x 30 (254 x 610 x 762) and weighs 1370 pounds (621 kg). Features drawer stripper.

SUSPENDED PERMANENT SEPARATORModel CP 20/80Self Cleaning Magnet. Removes large tramp metal from 30 in. (762 mm) (max.) belt width at 8 in. (203 mm) (max.) suspension height. Magnet measures 9.2 in. x 20.9 in. x 32.9 in. (234 x 531 x 836 mm) and weighs 1205 lbs. (547 kg.).

SUSPENDED ELECTROMAGNETSModel SE7338 With Cable SlingRemoves large tramp from the product stream. Overhead magnet (12 in. (305 mm) max. height) for 42 in. (1067 mm) (max.) belt width. This 42 in. (1067 mm) square magnet weighs 3035 lbs. (1376 kg) and operates at 5040 Watts. Features cable sling suspension.

Model SE7535 With Cable SlingRemoves large pieces of tramp metal from 54-inch (max. conveyors at 16-inches). This 54-inch square magnet weighs 5,800 pounds and operates at 7868 Watts. Features cable-sling suspension.

ELECTROMAGNET CONTROLSModel 50C41NEMA 4 Fixed Voltage Silicone Power Supply. Rectify AC line current for 5000 Watt electro-magnets. Features full wave bridge circuit with avalanche characteristics & fused AC switch. Normal convection cooled. 460V input / 120V output.

Model 10K41 NEMA 4 Rectifier NEMA 4 Fixed Voltage Silicone Power Supply. Rectify AC line current for 10000 WATT electro- magnets. Features full wave bridge circuit with avalanche characteristics & fused AC switch. Normal convection cooled. 460VAC input / 120VDC output.

SPEEDYDELIVERY!!

4

GRATE MAGNETSRare Earth Model P12-1/2 inch x 12 inch (318 x 305 mm). Drop this grate into the discharge of a hopper or chute to remove fine tramp iron from free-flow-ing products. Features six 12 in. (305 mm) long tubes and deflectors.

In Housing – Rare Earth Easy to Clean; 6 in.Rare Earth Model for 6 in. (152 mm) diameter chutes. Removes fine tramp iron from free-flowing products. Features a 10.5 in. x 8 in. (267 x 203 mm) flanged opening and two stag-gered rows (TGH2) of Rare Earth magnets.

In Housing – Rare Earth Easy to Clean; 8 in.Rare Earth Model for 8 in. (203 mm) diameter chutes. Removes fine tramp iron from free-flowing products. Features a 12.5 in. x 10 in. (318 x 254 mm) flanged opening and two stag-gered rows (TGH2) of Rare Earth magnets.

MAGNET LOAD MONITORSeries FSImproves Suspended Electromagnet perfor-mance. Eriez Magnet Load Monitor checks for ferrous accumulation on suspended electro-magnetic separators and trips a relay when the operator should clean the magnet face.

LIFT MAGNETSSafeHold® EPL SeriesIdeal for carrying semi-finished products with flat surfaces such as machine parts, press molds for forming, steel plate, etc. Permanent magnetic type, requiring no power supply. Small lightweight magnet features powerful magnetic force.

EPL-121Lift to 650 lbs (295 kg).

EPL-154Lift to 4,000 lbs (1814 kg).

SafeHold® RPL SeriesIdeal for carrying semi-finished products with flat or round surfaces such as machine parts, press molds for forming, steel plate, bars, etc. Permanent magnetic type, requiring no power supply.

RPL-3Lift to 300 lbs (135 kg) flat material. Lift to 150 lbs (68 kg) round material.

NEXT DAYSHIPMENT

5

LIFT MAGNETS (CONT.)SafeHold® RPL Series (cont.)RPL-11Lift to 1,100 lbs (500 kg) flat material. Lift to 550 lbs (250 kg) round material.

RPL-22Lift to 2,200 lbs (1,000 kg) flat material. Lift to 1,100 lbs (500 kg) round material

SafeHold® XPL SeriesIdeal for carrying semi-finished products with flat or round surfaces such as machine parts, press molds for forming, steel plate, bars, etc. Permanent magnetic type, requiring no power supply.

XPL-4/3Lift to 400 lbs (181 kg) flat material. Lift to 300 lbs (136 kg) round material.

XPL-8/6Lift to 800 lbs (363 kg) flat material. Lift to 600 lbs (272 kg) round material.

XPL-15/9Lift to 1,500 lbs (680 kg) flat material. Lift to 900 lbs (409 kg) round material.

XPL-24/16Lift to 2,400 lbs (1,090 kg) flat material. Lift to 1,600 lbs (727 kg) round material.

SL-4A Selecto® ElectroLifts up to 375 lbs. (170 kg). Lightweight, power-packed to provide reliable, fast lifts for hundreds of applications. Easy to install, easy to use. Eliminates hooks, slings or grabs. 100% duty cycle. Fully encapsulated moisture-proof coil. Standard voltage is 115VDC.

MAGNA-ROLLS®

2.5 in. Alnico (64mm)Install on existing conveyor lines. Magna-Rolls can be installed on new or existing conveyor lines to drive, convey and control steel prod-ucts. The rolls have a narrow air gap which provides maximum holding power and traction for a given diameter.

4.375 in. Alnico (111mm)Control movement of steel sheets. These Magna-Rolls drive, convey and control steel products. When rolls are arranged side by side on a common shaft, these units are placed with like poles adjacent (N-S, S-N, N-S, etc.) result-ing in deeper and stronger magnetic fields.

INNOVATIVESOLUTIONS

6

METALARM METAL DETECTORHandyTec® Model HH-10 Hand-HeldPinpoint tiny metal particles in all types of thin and shallow products with this hand-held metal detector. Power requirements are 110V, 60Hz.

TUBE MAGNET6 in. Rare EarthFeatures 1/4-20 tapped ends. These Rare Earth Tube Magnets remove ferrous contaminates from dry and liquid products. Manufactured with stainless-steel end plugs.

LIQUID LINE TRAPS2 in. Rare EarthFeatures NPT connections. Removes fine tramp metal contamination from 2 inch lines (50 mm).

3 in. Rare EarthFeatures NPT connections. Removes fine tramp metal contamination from 3 in. (75 mm) lines.

4 in. Rare EarthFeatures NPT connections. Removes fine tramp metal contamination from 4 inch (100 mm) liquid lines.

2 in. Rare EarthFeatures WLMO connections. Removes fine tramp metal contamination from 2 inch (50 mm) liquid lines. Sanitary construction.

3 in. Rare EarthFeatures 14 WLMO connections. Removes fine tramp metal contamination from 3 in. (75 mm) lines. Sanitary construction.

SHEET FANNERS11 in. CF-88 (11 in. high x 17 in. wide)Snappy action fans hard-to-hold sheets. Eriez Hi-Powr Sheet Fanner provides efficient fan-ning with no more "doubles" and no more mar-ring of polished and painted sheets.

8 in. CF-77 (8 in. high x 10 in. wide)

Provides efficient fanning action. Semi-sticky, oily, bent and heavy-gauge sheet steel will fan with ease and provide new efficiency to slow, costly, difficult sheet feeding. Our units increase production with no more prying or marring of polished and painted sheets.

7

PULL TEST KITEasily measures magnet strength. Quality con-trol tool used to monitor magnet performance. Ideal for tracking changes in magnetic strength.

PLATE MAGNETSSuper Power PlateCreates a 2-3 inch (50-75mm) magnetic field to reach into thin burdens of material to remove large tramp metal contamination. The magnet length measures 7-5/8 inches (194 mm) long and is 2-1/16 inches (52 mm) thick, is shipped with one tapered step to enhance separation performance and hinge and latch for ease of installation.

Sizes available: 8, 10, 12 & 14-inch (203, 254, 305 and 356mm) widths to match your chute or conveyor width.

Maxi Power PlateFor tougher applications our Maxi creates a 3-4 inch (75-100 mm) magnetic field to reach into thin burdens of material to remove medium and tramp metal contamination. The magnet length measures 10-5/8 inches (270 mm) long and is 2-11/16 inches (68 mm) thick, is shipped with one tapered step to enhance separation performance and hinge and latch for ease of installation.

Sizes available: 8, 10 & 12-inch (203, 254, & 305mm) widths.

Rare Earth PlateThe standard for food and pharmaceutical appli-cations. Our Rare Earth creates an intense mag-netic field at the plate surface that makes these units ideal for shallow burdens where product purity is the number one priority. The Rare Earth circuit is effective at removing fine and feebly magnetic. The magnet length measures 5-1/2 inches (140 mm) long and is 1-3/16 inches (30 mm) thick, is shipped with one tapered step to enhance separation performance and hinge and latch for ease of installation.

Sizes available: 6, 8, 10, 12, and 14 inch (152, 203, 254, 305, and 356mm) widths

Web Site: http://www.eriez.com e-mail: eriez@eriez.comTelephone 814/835-6000 • 800/345-4946 • Fax 814/838-4960 • International Fax 814/833-3348HEADQUARTERS: 2200 Asbury Road, P.O. Box 10608, Erie, PA 16514-0608 U.S.A. MANUFACTURING : Australia • Brazil • China • India • Japan • Mexico • South Africa • United Kingdom • United States

1006-6M-SG-AP Eriez Manufacturing Co. Printed in USA

World Authority in Advanced Technology for Magnetic, Vibratory and Metal Detection Applications

SafeHold, Selecto, HandyTec, Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co., Erie, PA©2006 Eriez Magnetics • All Rights Reserved

BIN VIBRATORS (WITHOUT CONTROLS*)Model 20NBin capacity up to 5 cu. ft. (.14 cu m), 115V. The 20N is practically noiseless and is ideal for many light-duty applications. It operates on the inertial principle, producing a flexing action on bin walls as a means of moving stubborn materials.

Model 30NBin capacity up to 15 cu. ft. (.4 cm), 115V. The 30N is practically noiseless and is ideal for many light-duty applications. It operates on the inertial principle, producing a flexing action on bin walls as a means of moving stubborn materials.

Model 30PBin capacity up to 20 cu. ft. (.57 cu m), 115V. For medium-duty applications this model effec-tively handles a wide variety of hard-to-move materials. Hopper walls should be 1/16 to 1/8 inches thick (1.6 - 3.2 mm).

Model 40PBin capacity up to 3 tons (2.7 MT), 115V. For medium-duty applications, this model effec-tively handles a wide variety of hard-to-move materials. Hopper walls should be 1/8 to 1/4 inches thick (3.2 - 6.4 mm).

Model 55PBin capacity up to 18 tons (16.3 MT), 115V. This heavy-duty impact model is designed for larger capacity applications. Its powerful action makes it ideally suited for difficult material-moving jobs. Hopper walls should be 1/4 - 5/16 inches (6.4 - 8 mm) thick.