Erf: Village Home Master SPECIFICATION AND SCHEDULE OF ... · 13.2.2 Garage External - Horizontal Slatted Solid Hardwood - Swartland Cape Culture (PD61) per door schedule. 86 x 67mm

C:\Users\Roy\ownCloud\Sitari CE\Sitari_13 Houses\Sitari CE_13 House_ Design\1_ Architect\4_ Specification & Finishings\Sitari_ Typical House_ Specification Schedule of

Finishes_Rev0(2020-08-12).docx

ANNEXURE “H”

Effective Date:

12th August 2020

Erf: Village Home Master

SPECIFICATION AND SCHEDULE OF FINISHES (Rev.0)

Please note: The materials specified in this Schedule are dependent upon availability; where the items

specified cannot be obtained, the Developer reserves the right to supply alternate items of similar quality.

The Purchaser will be requested to select tile and vinyl colours from the theme boards provided by the

Developer after construction has commenced. The Purchaser agrees to make such selections within 7 days of being requested to do so. Should the Purchaser fail to make such selections within the 7 day period, then the Developer shall have the right to make the required selections.

Should an instance arise where this Schedule is in conflict with the working drawings, then this Schedule will override the drawings. Any landscaping and furnishings indicated on plan are for illustrative purposes

only and are not provided.

When “Architect” is referred to in this Schedule, the “Architect” means the person appointed by the Developer.

1. Site Work and Excavations

1.1 The Developer reserves the right to adjust the floor levels on site as may be most suitable to obviate undue plinth heights.

2. Concrete:

2.1 Concrete foundations and slabs will all be laid with ready mix concrete (25 Mpa) per Engineers design.

2.2 Pre-construction termite protection to all surface beds prior to casting of ground floor slab.



3. Brickwork & Blockwork:

3.1 Final levels, depths of excavations, stairs (if applicable) will be determined by the Developer on site

at his discretion. 3.2 Foundation brickwork - Concrete Maxi Bricks (14Mpa) 3.3 Superstructure brickwork - Concrete Maxi Bricks (7Mpa) 3.4 Boundary and dwarf walls - Concrete 190mm Block (5Mpa) 3.5 Lintels - Pre-stressed precast concrete lintels 3.6 Damp proofing - 250 Micron to surface bed. 3.7 Garage door threshold - 50 x 50 x 5mm Angle with 50 x 100mm long x 6mm thick welded

on lugs at 500mm c/c maximum, for bolting into concrete floor slab.

4. Plastering:

4.1 External - Smooth plaster and paint - Sponge finish 4.2 Internal - Smooth plaster and paint - Steel trowel finish

5. Screed:

5.1 External - 30mm Thick on floors and landings - steel trowel finish 5.2 Internal - 30mm Thick on floors and landings - wood floated 5.3 Shower - Average 50mm thick on shower floors to falls and currents 5.4 Garage - Granolithic screeds to be bonded, untinned and finished to the

degree of accuracy grade 1 steel trowel on concrete to garage floor.

6. Window sills:

6.1 External - Plastered sills to match wall finish with external fall 6.2 Internal - Plastered sills to match wall finish

7. Roofing, Eaves, Waterproofing, Pergola:

7.1 Roof covering with pitches not exceeding 40 degrees where the external width of the building is less than 5.0m.

7.2 Roof covering with pitches 30-35 degrees where the external width of the building is more than 5.0m.

7.3 Pitch not exceeding 25° members fixed to walls including 50 x 76mm sawn softwood purlins.

7.4 Extra over double pitch roof construction to all types for 38 x 114 SAPG05 geyser decking planks over trusses for geyser support.

7.5 Nutec medium density plain fibre-cement screw fixed. Eaves soffit coverings 300mm wide of 4mm thick sheets.



7.6 Derbigum SP3 torch on water proofing to roof flashing, two coats bituminous aluminum paint, two coats ABE Duraflex.

7.7 Timber truss and rafter:

7.7.1 0.54mm ‘Diamondek’ AZ200 Colourbond Ultra concealed roof sheeting and

including an underlay of 400 micron 2-ply spunbound “Monier” undercover membrane with 150mm sealed laps fixed to timber purlins or rails fixed to manufactures instructions. Roof sheets colour to be selected from theme boards. Theme 1: Granite Matt Theme 2: Alley Matt Light Grey

7.7.2 Galvanised Hoop Iron Roof ties - 30mm x 1.6mm. 7.7.3 Alububble insulation 4mm Thick foil insulation OR Coverland Radenshield double

sided insulation over purlins. 7.7.4 Isotherm insulation 135mm Thick flexible non-combustible lightweight insulation. 7.7.5 Fascia boards 12 x 225mm Nutec medium density plain fiber-cement screw fixed.

7.8 Exposed timber truss:

7.8.1 0.54mm ‘Diamondek’ Granite Matt AZ200 Colourbond Ultra concealed roof

sheeting and including an underlay of 400 micron 2-ply spunbound “Monier” undercover membrane with 150mm sealed laps fixed to timber purlins or rails fixed to manufactures instructions and gang nail detail per Architects detail. Roof sheets colour to be selected from theme boards. Theme 1: Granite Matt Theme 2: Alley Matt Light Grey

7.8.2 Galvanised Hoop Iron Roof ties - 30mm x 1.6mm. 7.8.3 Alububble insulation 4mm Thick foil insulation OR Coverland Radenshield double

sided insulation over purlins. 7.8.4 50mm Isopine Isoboard insulation (See 10.2 – Isopine Isoboard Ceiling) 7.8.5 Fascia boards 12 x 225mm Nutec medium density plain fiber-cement screw fixed.

7.9 Pergola:

7.9.1 Built to Architects detail, supported by 150mm x 50mm Timber posts, to be planed

all-round and sanded smooth. Pergola colour and material to be selected from theme boards. Theme 1: Meranti Natural Stained Theme 2: SA Pine painted White

8. Gutters:

8.1 External eaves gutter:

8.1.1 125mm x 85mm Domestic OGEE aluminum eaves gutter, colour to suit roof

sheeting per theme. 8.1.2 70mm diameter uPVC rainwater downpipe and shoe, painted to match wall colour.



8.2 Internal box gutter:

8.2.1 150 x 120mm Deep aluminium box gutters, 440mm girth. 8.2.2 100mm diameter uPVC downpipe and shoe, painted to match wall colour.

9. Secondary storm water management:

9.1.1 Storm water sumps (cast Iron gratings), trenching and piping (class uPVC pipes) as detailed per Architects detail.

10. Ceilings:

Additional noggins for garage motor, ceiling fans and chandeliers included for as required per architectural drawings.

10.1 Internal Flush Plastered Ceiling:

10.1.1 6,4 mm Rhino gypsum plasterboard with 63mm wide strips of mesh scrim nailed screw fixed over joints and the whole finished with gypsum skim plaster.

10.1.2 600 x 600 x 16mm MDF lay in (painted to ceiling colour) trap door in white epoxy coated aluminum T-section frame.

10.1.3 NMC, AT - 90 x 100, Polystyrene molded cornice.

10.2 Isoboard Ceiling:

10.2.1 50mm Isopine Isoboard insulation, T&G side down. 10.2.2 75mm Isotherm insulation on top of Isoboard.

10.3 External Ceiling:

10.4.1 Nutec medium density T&G fibre-cement fix on top of the rafters.

11. Aluminium Windows and Doors:

11.1 Windows - Powder coated aluminum with double glazing (DB38 RW rating for the unit),

ironmongery, sealant - (refer to detailed typical detail drawing as per Window Schedule), Obscure glass to bathroom windows.

11.2 Doors - Powder coated aluminum with double glazing (DB38 RW rating for the unit), ironmongery, sealant - (refer to detailed typical detail drawing as per Door Schedule).

Aluminium colour to be selected from theme boards. Theme 1: Charcoal Matt ( Code: ANP 3055) Theme 2: Hipca White (Code: ANP 3050)



12. Garage Door

12.1 Powder coated Aluzinc motorized sectional overhead garage door (colour to match aluminium window and doors)

for size 4880mm x 2125mm high opening including automation, wall remote and two remote controls.

13. Timber Door Frames and Doors:

13.1 Internal :

13.1.1 Internal Doors – Swartland Kayo, Commercial Veneer, Medium Duty (VNSAPMI2). 86 x 67mm rebated hardwood frames to suit door size 813 x 2032mm (H)(FB1/NS). Theme 1: ‘Plascon’ Hong Kong Mist 64 Theme 2: Colour White

13.1.2 Garage Internal - Swartland Kayo, Commercial Veneer,Fire Duty (VNCOMFS2) (30min Fire rated door). 86 x 67mm rebated hardwood frames to suit door size 813

x 2032mm (H) (Fire door) (KYFH1/NS). Door colour to be selected from theme boards.

Theme 1: ‘Plascon’ Hong Kong Mist 64 Theme 2: Colour White

13.2 External:

13.2.1 Front Door - Horizontal Slatted Solid Hardwood - Swartland Cape Culture (PD61) per door schedule in aluminium frame.

13.2.2 Garage External - Horizontal Slatted Solid Hardwood - Swartland Cape Culture (PD61) per door schedule. 86 x 67mm rebated hardwood frames to suit door size 813 x 2032mm (H) (FB1/OO). Door colour to be selected from theme boards. Theme 1: Meranti Natural Stained Theme 2: Painted, colour White

14. Shower Door and Screens:

14.1 Frameless shower screens of 8mm clear TSG 2100mm high, including satin chrome brackets, fittings and glass corner stabilizer shelf (See detail bathroom layouts)

15. Ironmongery & other:

15.1 Internal/ External Timber Doors:

15.1.1 Butt hinge - 100 x 76 x 3mm Stainless steel butt hinge size. (Code. QS4415) 15.1.2 Cabin hook - 150mm Stainless steel cabin hook and eye, including 75 x 75 x



22mm chamfered meranti block primed, 2 coats paint and plugged. (Code. QS4449/2)

15.1.3 Three lever lock - Satin chrome plated. (Code. QS5757/A) 15.1.4 Handles - Stainless steel tube lever handles with keyhole escutcheons

, 2 Sets of keys per lock will be supplied to Employer(s). (Code. Bodo)

15.1.5 Door closer - Overhead door closer with universal soffit bracket, (Code. QS680) for opposite hinge installation. (Code. QS7708)

15.1.6 Door stop - Stainless steel door stop. (Code QS4422)

15.2 Pedestrian Gates: 15.2.1 Handles – QS BODO Lever handle on rose S/S QS Narrow Style backplate – (Code. QS4483CYL) Note: BODO lever handle to be converted to narrow style back plate for gates. 15.2.2 Lock – QS 35mm Cylinder Sash Lock S/S - (Code. QS8535/1SS) 15.2.3 QS 66mm Double Cylinder Satin Nickel – (Code. QS1104SN) 15.2.4 S.S Hinges as supplied with frame.

15.3 Letterbox - Letterbox and house number to Sitari Architectural Guideline.

16. Skirting:

16.1 Timber skirting - ‘Essential Skirtings’ Q14 16 x 67mm timber skirting to frame edge

painted colour White, with mitred corners.

16.2 Tiled skirting - Tile to match floor finish, 100mm (h), with brushed aluminium edge trim, bathrooms internal only.

17. Water, Plumbing and Drain laying:

Sewerage: uPVC Drainage & Waste Pipe connections to main line sewerage per Architect’s detail.

Water supply: Smart meters to be installed per house as per Sitari specification and Architect’s detail.

House reticulation: "Geberit Mepla" or similar multilayer pipe for polyvinylidene fluoride fittings for water installation.

18. Sanitary ware and Fittings:

18.1 Hot Water Cylinder / System:

18.1.1 Direct solar/electric water heaters 200lt, incl valves and breakers – Kwikot 1650 Plastic geyser tray SABS Flat plate solar collector panel - black finish, 2000 Solar photovoltaic panel 12V 10Watt



Geyser wise plastic pump, 12V Geyser wise tse geyser controller UV solar lagging 1.8m (22mm)

18.1.2 Scullery – Prisma Classique Kwikot Compact Under basin Geyser (15L)

18.2 Bath: - Aruba Bath (Built-in) with handles 1700 x 700 (Code- BM11H) - Gio Plumbing waste clicker BTW201 - Gio Bella Nikki spout old style chrome - Dutton Plain Bath Combination Trap, 40mm - Hansgrohe universal I-box concealed part only (13620180) - Hansgrohe Decor Single lever bath mixer finish set (31967223)

18.3 Basin:

- Hansgrohe Decor Single lever basin mixer 70 without waste set (31733223) - Gio Plumbing waste clicker BTW201 - Gio Plumbing - Benkiser Regulating Angle Valve (5188) - Geberit DIP bottle trap with valve collar horizontal outlet (151.034.11.1) - Geberit Smyle cabinet for washbasin with two drawers B 870mm x 625mm x 490mm white

(GEB-500.244.01.1) - Geberit Smyle cabinet square vanity basin with centre tap hole 900mm x 480mm white (GEB-

500.251.01.1)

18.4 Guest WC Basin: - Hansgrohe Decor Single lever basin mixer 70 without waste set (31733223) - Gio Plumbing waste clicker BTW201 - Gio Plumbing - Benkiser Regulating Angle Valve (5188) - Geberit DIP bottle trap with valve collar horizontal outlet (151.034.11.1) - Geberit Smyle cabinet for washbasin with two drawers B 570mm x 625mm x 490mm white - Geberit Smyle cabinet square vanity basin with centre tap hole 600mm x 480mm white

18.5 Toilet:

- Geberit Sigma concealed cistern 8 cm, 6 / 3 litres (109.791.00.1) - Geberit iCon floor-standing WC, back-to-wall, Rimfree: white (500.402.01.1) - Geberit iCon WC seat: white with metal hinges (500.430.01.1) - Geberit actuator plate Sigma20 for dualflush: white / bright chrome (115.882.KJ.1) - Dutton Plastic- Pan connectors DUT-FPSP

18.6 Shower:

- Hansgrohe universal I-box concealed part only (13620180) - Hansgrohe Decor Single lever shower mixer finish set (31967223) - Hansgrohe Raindance S150 Shower Head - Hansgrohe Shower arm 38.9 cm 27413000 - Horizontal Floor Shower trap HTSL-50/75H



18.7 Kitchen Sink:

- Hansgrohe Decor Single lever kitchen mixer 160 (31806223) - 2 x Franke Stella SVX 110-40 428 x 428 x 190mmD satin stainless steel undermount sink

(Code: 1990044). Includes 2 x 90mm basket strainer waste fittings. - SPAZI F/2 double bowl plumbing kit, 50/90mm outlet - Franke (Kitchen Systems) - Spazi - Wastes, Traps & Overflows - Plumbing Kits FRA (1120009) - Gio Plumbing - Benkiser - Valves - Angle Valve - Chrome GIO (5188)

18.8 Washing Machine/Dishwasher Connections:

- Isca - Lerato - Taps - Stop Taps - ISC-A4173LEP -

18.9 Fridge Connections: - Isca - Lerato - Taps - Stop Taps - ISC-A4173LEP

18.10 Prep Bowl:

- Hansgrohe Decor Single lever kitchen mixer 160 (31806223) - Gio Plumbing - Benkiser - Valves - Angle Valve - Chrome GIO (5188) - Franke Cub 150 390L x 455W x 140mmD satin stainless steel undermount prep bowl

(Code: 1990034)

18.11 Bath accessories: - Bathroom Butler, 4601 toilet roll holder type 1, Polished Chrome - Bathroom Butler, 4625 glass shelf 330mm, Polished Chrome - Bathroom Butler, 4672 single towel rail 650mm, Polished Chrome

18.12 Outside Tap

- Cobra 20mm RB garden hose bibtap

19. Electrical:

Electrical connection not exceeding 15m from the site boundary to the distribution board (back of garage wall) of each unit including excavation, backfilling, sleeve, conduit, cable connection to the DB. Coiled up cable 1m inside the plot boundary with sufficient length to terminate in DB.

Testing and commissioning the complete electrical installation and COC's to be issued.

Smart meters to be installed per house as per Sitari specification.



20. Light Fittings:

20.1 Product Key:

- External General – Wall Mounted ‘Bright Star Lighting’ Up Down - Black

(Code L132)

- External Gate Entrance – Wall Mounted Giza Eyelid (C326 - Regent) (Day/Night Switch in fitting)

- Internal Garage - Ceiling Mounted ‘Bright Star Lighting’ Flushmount Fluorescent Fitting (Code FTL4011)

- External Patio - ‘Bright Star Lighting’, Tilt External LED Downlight – Aluminium (Code DL251 )

- Internal General Ceiling – ‘Bright Star Lighting’ Tilt LED Downlights Aluminium (Code DL251)

- Internal Lounge Pendant - Mounted on Truss ‘Bright Star Lighting’ Pendant fitting – Satin (Code PEN009)

- Internal Kitchen Pendant - Mounted on Truss ‘Bright Star Lighting’ Pendant fitting – Satin (Code PEN006)

- Internal Dining Room Pendant - Mounted on Truss ‘Bright Star Lighting’ Pendant fitting – Satin (Code PEN009)

- Internal Bathroom - ‘Bright Star Lighting’ Tilt LED Downlights Aluminium (Code DL251) ‘Bright Star Lighting’ LED Splash proof Downlights Aluminium (Code DL032)

20.2 Light Allocation:

See Architects Electrical layout for light allocation and quantities.

21. Switches, Telephone, Data and Plugs:

21.1 Product Key:

Legrand “Ysalis” range - Switches, Plugs and Function Sockets: (White Switches with White Cover plate) - Plug Single Single old RSA Socket Switched White (PYSO44WHT) - Plug Double New RSA + Old Double Socket Switched White(PYNOS44WHT) - Plug Single Legrand Single IP55 (Weather proof) Box-680633, Plug-572132 - Plug Double Double Old RSA Double Socket White (PYO44WHT) - Isolator 40A Isolator 4X4 White (PYISO40AWHT) - Switch One Way 1 Lever Switch White (PY124WHT)

2 Lever Switch White (PY224WHT) 3 Lever Switch White (PY324WHT)



- Switch Two Way 1 Lever Switch 2-Way White (PY1224WHT)

2 Lever Switch 2-Way White (PY2224WHT) 3 Lever Switch 2-Way White (PY3224WHT)

- Telephone point New RSA Socket Switched x2 + USB x2 + Data White (PYNSUD44WHT)

- Network & TV Point Old/New RSA Socket + TV + Data White (PYONTVD44WHT)

21.2 Switch Allocation: See Architects Electrical Layout for Switch location and functionality.

21.3 Telephone Allocation: See Architects Electrical Layout for Telephone allocation.

21.4 Data Allocation:

See Architects Electrical Layout for Data allocation.

21.5 Plug Allocation: See Architects Electrical Layout for Plug allocation and quantities.

22. Painting:

All painting as per the Sabre Paints (Sitari Paint Specification) approved by the Architect.

Purchaser to select External & Internal colours from themes boards supplied by Developer. Internal Colours: Theme 1: General colour - ‘Plascon’ Plaster 61 Theme 2: General colour - ‘Plascon’ Plaster 61 External Colours: Theme 1: General colour - ‘Sabre Paints’ Silver Leaf TP B 114-S Accent colour – Stonewash D34 3603-T Theme 2: General colour – Werf Wall D34 3601-P Accent colour – Stonewash D34 3603-T

22.1 External walls - One coat Masonry Primer and two coats Flexiseal

(N-SPEC 3a)

22.2 External Doors - One coat Woodprimer, one coat Premium Universal Undercoat and two coats Satin Non- Drip Acrylic (N-SPEC 8)

22.3 External Fiber - One coat Masonry Primer and two coats Roof Shield Cement (N-SPEC 6)



22.4 Internal walls - Skim with Sabreskim Interior and two coats Luxury Matt Steel Trowel (N-SPEC 2a)

22.5 Internal walls - Skim with Sabreskim Interior and two coats Luxury Matt

Floated plaster (N-SPEC 2b) (Garages)

22.6 Internal Flush Plaster - Two coats S888 matt acrylic (N-SPEC 5)

Ceilings and Cornice

22.7 Internal Doors - One coat Premium Universal Undercoat and two coats Satin Exposed Trusses Non- Drip Acrylic(N-SPEC 7)

and Skirting

22.8 Pergola -3 coats ‘Woodseal’ as per Sabre Paints specification.

23. Floor Covering:

23.1 Floor tiles to be selected from theme boards provided by Developer. Floor tiled areas as indicated on Architect’s drawing. Theme 1: Screed Plaster A33 600x600mm

Theme 2: Napoli Light Grey SH10 600X600mm 23.2 Floor Vinyl planks to be selected from theme boards provided by Developer.

Floor vinyl areas as indicated on Architect’s drawing. Theme 1: Conticlic 61014 Silver Oak Theme 2: Conticlic 61015 DaVinci Oak White.

24. Wall Covering:

24.1 Wall tiles to be selected from theme boards provided by Developer. Floor tiled areas as indicated on Architect’s drawing. Wall tiling Heights: Theme 1: Screed Plaster A33 600x600mm Inset tile – Screed Mud A12 Theme 2: Napoli Light Grey SH10 600X600mm Inset tile – Screed Mud A12

Bathroom shower internal - 2.4m from FFL Bathroom bath splashback - As per Architects bathroom layout Bathroom vanity splashback - None Kitchen / Scullery splashback - 20mm x 100mm (H) Eezi Quartz-Slate



25. Built-in Cupboards & Kitchen Units:

25.1 Kitchen & Scullery Units: Theme 1:

Work surfaces : 20mm Eezi Quartz – Iceberg White

Doors : 16mm Supawood, PG SupaMatt in Dunblane Grey with 1mm PUR edging

Interiors : 16mm Folkstone Grey melamine with 1mm PUR edging

Exteriors : 16mm Supawood, PG SupaMatt in Dunblane Grey with 1mm PUR edging

Open shelves : Supawood in PG Bison Supamatt in Dunblane Grey with 1mm PUR edging

Drawer runners : Grass, DWD – soft close

Handle : Cover strip handle, aluminium

Hinges : Grass, Omni - soft close

Cornice : 32mm trim, Supawood in PG Bison Supamatt in Dunblane Grey with 1mm PUR edging

Kick plate : Aluminium

Cupboard legs : Plastic, adjustable legs

Glass cladding : Glass splashback behind hob cooker only

Bin : Bin pull out included, plastic bin insert included

Spice : Plastic spice insert in drawer

Cutlery : Plastic cutlery insert in drawer Theme 2:

Work surfaces : 20mm Eezi Quartz – Iceberg White

Doors : 16mm Supawood, PG SupaMatt in ‘Congo’ with 1mm PUR edging

Interiors : 16mm ‘Cotton’ melamine with 1mm PUR edging

Exteriors : 16mm Supawood, PG SupaMatt in’ Congo’ with 1mm PUR edging

Open shelves : Supawood in PG Bison Supamatt in ‘Congo’ with 1mm PUR edging

Drawer runners : Grass, DWD – soft close

Handle : Cover strip handle, aluminium


Cornice : 32mm trim, Supawood in PG Bison Supamatt in ‘Congo’ with 1mm PUR edging

Kick plate : Aluminium

Cupboard legs : Plastic, adjustable legs

Glass cladding : Glass splashback behind hob cooker only

Bin : Bin pull out included, plastic bin insert included

Spice : Plastic spice insert in drawer

Cutlery : Plastic cutlery insert in drawer



25.2 Bedrooms 1,2 & 3: Theme 1:

Doors : 16mm Folkstone Grey melamine with 1mm PUR edging

Interiors : 16mm Folkstone Grey melamine with 1mm PUR edging

Exteriors : 16mm Folkstone Grey melamine with 1mm PUR edging

Handle : Barcelona, brushed (256mm)


Ceiling filler : 16mm Folkstone Grey melamine

Kick plate : 16mm Folkstone Grey melamine with 1mm PUR edging Theme 2:

Doors : 16mm ‘Cotton’ melamine with 1mm PUR edging

Interiors : 16mm ‘Cotton’ melamine with 1mm PUR edging

Exteriors : 16mm ‘Cotton’ melamine with 1mm PUR edging

Handle : Barcelona, brushed (256mm)


Ceiling filler : 16mm ‘Cotton’ melamine

Kick plate : 16mm ‘Cotton’ melamine with 1mm PUR edging

26. Appliances:

26.1 1 x Cooker: Smeg | Concert GasElec Cooker 90cm S/Steel XXL Oven:129L Gross Capacity (SSA91MAX9)

26.2 1 x Extractor: KSET900XE – 90CM Telescopic Extractor Fan KITFC500 Charcoal Filter For Extractor Fan

27. Pedestrian Gates:

27.1 Standard pedestrian gates sizes – 1.8m x 920mm; 1.2m x 920mm Manufactured from 38 x38 tube and 75 x 25 tube All welds to be grinded clean Unspecified radius are 3mm All steel work to be powder coated-colour to match aluminium windows and doors. Integrated latch system

28. Paving:

28.1 Driveway 200mm x 100mm x 50mm brown sandstone exposed aggregate pavers

with 300mm x 300mm x 45mm Jura straight edge paver. Paving lay in herringbone bond to falls. Driveway area as indicated on Architect’s drawing.

28.2 Yard 200mm x 100mm x 50mm brown sandstone exposed aggregate pavers

with 300mm x 300mm x 45mm Jura straight edge paver.



Paving lay in herringbone bond to falls. Driveway area as indicated on Architect’s drawing.

28.3 Pathways 1000mm x 500mm x 50mm Charcoal etched texture Devon paver

29. Driveway Sleeve:

29.1 2 x 110Ø sleeves installed to link sidewalk landscaping, to be installed 600mm under finished levels, capped and shall protrude at least 600mm horizontally into planting areas.

30. Landscaping and Gardens:

30.1 Roll on grass as per Sitari Spec.

31. Irrigation:

31.1 No irrigation to erf.

Optional Extras: Built in Patio Braai:

Braai built with clay brick

Includes expanded mesh braai grating Fireplace:

Godin Cube wood burning stove – 6.5KW

Matt black flue, escutcheon plate and cyclone cowl

Accepted and agreed to at ___________________________ On this the________ DAY

OF ____________________________________.

The Developer: The Purchaser:

________________________________ _____________________________

Witness: Witness:

________________________________ _______________________________

Documents

Erf: Village Home Master SPECIFICATION AND SCHEDULE OF ... · 13.2.2 Garage External - Horizontal Slatted Solid Hardwood - Swartland Cape Culture (PD61) per door schedule. 86 x 67mm