Equipment Sales List

All offers are subject to prior sale

All prices are net; a commission of 5 – 8% will be added

001 1X WOODEN PALLETS PRODUCTION LINE

Bj. / built: 1988 – never used.

composed of:

·1. Type ZNT - pre-poster limb for striking of board and wood exists of 3 rails

1 Support with 9 input stations

Length 6.5 metres

2. type ZDT - poster limb for striking of ready palette

1 Support with 17 inputs and impact of nail

4 saws 1.1 kW 2800 revos-6 of Milling aggregat. 1.5 kW 2800 revos

Total length 4.5 +7.5 m

3. conveyor belts

Price: € 98.000,-- EXW Poland.

002 Used Tire Recycling Plant

Price: € 169.000,-- EXWGermany „as it is“ excl. dismantling.

003 Used SHEEP SLAUGHTER LINE

Description of Sheep slaughter line

(Capacity: 300 sheep per hour)

(Year of manufacturing: 2006)

Price: € 180.000,-- EXWGermany “as it is”

004 Complete technical Equipment for 1 Research laboratory – Medicine

Purschased: 1999 to 2002

All medical labaratory units very almost not used.

Price: approx. 3,500,000.- EUR EX Location Germany.

New- Price: approx. 25,000,000.- EUR (Twenty-Five Millionen EUR)

005 Complete inventory 1 surgical practise clinic

The medicine-technical devices and the whole high-quality equipment come from 2002-

in 2003 and are checked before the sales once again to MPG and receive suitable new certificates.

The whole equipment would be used only maximum four years.

006 10 units Dialysis Devices

Typ: HD- Secura,

Manufacturer: B. Braun Melsungen AG

YOM: 1997

Accessories: Extensive spare part accessories like several pump unities, several different also

partly new electronic tax unities, several new concentrate pump tubes welded.

Price: € 3995,-- each EXWGermany if all 10 units purchased

007 Used HOSPITAL EQUIPMENT

for 100 patients

for the following sections:

Eye clinic

Orthopaedy

Surgery

Neonatalogy

Price: € 1.950.000,-- EX Works Belgium.

008 Injection Moulding machine

Battenfeld BA-TBA-T -SO

2.200 T2.200 tons Clamp. force

Moulding machine

Euromap: 22000-40000

Baujahr / year of manufacture: 1990

Price: € 188.000,-- EXW Germany, overhauled

009 1 used Processing Line for Melted-Cheese

consisting of:

1 Worm-Shaft-Mixer, 450 l

1 Double-Chamber Mixing Cooker

1 Control panel

1 CIP cleaning-wagon

for the fully automatic PC-controlled CIP-cleaning

Prices: € 260.000,-- complete as above Reconditioned EXW Germany

010 4.700 pcs. Truck Tires (retreading) for trailers

in different Brands, as Michelin etc.

Sizes; 295 / 80 R22,5 + 315 / 80 R22,5 + 385 / 65 R22,5

Price: € 140,-- per piece EXW Germany,

only mixed in sizes and brands.

011 1 NEW MOBILE DRILLING AND WORKOVER RIG

For Oil, Gas and Water drilling.

Made in Germany.

As in attached technical description.

Price: € 4.900.000,-- EXW Germany, without packing.

012 2x SCREW COMPRESSORS„Typ SE56 III“

as in attached specification

built 1988 – excellent condition,

regularly inspected ready for use.

Luftdruck / Air pressure: 7,5 – 10,0 bar

Motorleistung / Capacity: 37 KW

Drehzahl / Speed: 2940 u/min / r.p.m

Ventilationsluftmenge: 120 m3/min

Gewicht / Weight. 825 kilos

Price: € 4, 500.-- per Unit EXW Hamburg if both units are purchased.

013 VIOLA Brand baby diapers line Mod. T.M.P. 00400

Year of installation: 2002

Sizes: 3-6Kg, 4-10Kg, 9-15Kg, 13-20 Kg, 17-25 Kg.

Output speed: 400 pieces/minute

Installed power 290 Kw

Running power 190 Kw

Weight of the line 40.100 Kg.

check-up, installation at client’s plant: € 890,000.--

014 1 Complete Used Potato chip plant

Maker: type FMC-Levatti

output: 300-400 kg/h according to the product and recipe,

Price: a.) € 120.000,-- EXWGermany “as it is”.

b.) € 280.000,-- EXWGermany, OVERHAULED.

Warranty: 1 year on all parts to be renewed.

015 Complete Cattle slaughter & processing line “BANSS”

Capacity: 60 cattle / hour Producer: Banns (slaughter line) Built in: 1993/94 Condition: excellent Preis

/ Price: € 1.800.000,-- EXWGermany Dismantling cost: (Option) 390.000,-- Euro

016 Complete Cattle Equipment „BANSS“

Capacity: 60 cattle / hour

Fabricator: Banss

Year of manufacture: 1996

Condtion: Excelent

Price: € 548.000,-- EXW Germany including dismantling

and loading to the containers

017 10 MERCEDES „Viano“ Cars, new

10 MERCEDES „Viano“ Cars, new

Bj. / Built: 2007

NEW as in attached pictures.

All are with right hand steering.

Price: € 23.500,-- each EXWEurope for taking all.

(Normal list price € 52.000,-- each)

018 1x Chocolate moulding for solid and filled chocolate

Manufactuerer: Carle Montanari Type: Confiseur CC 275 Moulds: 275 x 205 x 28 mm high Output: abt.

10 moulds/min.= abt. 250 kg/h Year: abt. 1988 Price: € 145.000,-- EX location UK.

019 1 COMPLETE PP- FOLDING BOX PRODUCTION LINE

second Hand

Tetra Pak Filling machine TBA 3

200 ml base line,

Constr. year approx. 1980

Straw applicator Tetra Pak TSA 33

working hours approx. 20.000 h

Tray Packer TCBP 62

and conveyors

still installed

the Capacity 3600 TP/h

The machine is equipped with an additional label applicator for, per example, for promotion activities.

020 1 x Used TETRA PAK Filling Line, Type TBA 3 200 ml bl as in attached prospect – producing plastic folding boxes with handles, complete with moulds.

Hemscheidt HPM 1000

Built: 1995

2 cores

Moulding hight 500 – 1250 mm min. 400 max. 980

Robot for 32 ltr. boxes

Tool for 32 ltr. folding boxes

Boxes production 32 ltr.

clamp. force appr.: 1000 t

shot w. PS. appr.: 2.800,00 gr.

Voltage: 380-420 volts, 50 cycles with central conductor and ground.

NEW PRICE: € 249.000 EXW complete with moulds, incl. inspection.

021 NEW- Original Spare Parts for Trucks & Buses for Modells 2000 - 2007

(link will open slowly because it contains the whole list and is more than 2 MB)

MERCEDES BENZ, SETRA, EVOBUS, CITARO

as in attached stock list, pictures

PRICES: stockprice € 180.000,-- for all / gesamt EX Warehouse

( wholesale price € 1,5 Mill.)

Volume: 1x 40ft. Container.

022 Used Can Filling Line – 24.000 can/h for Beer and Softdrinks

capacity: approx 24,000 0.33 l cans/h

cans: 0.33 l and 0.50 l

can type: 202

pallet: 1,300 x 1,400 mm

New Price: € 285.000,-- EX Location Germany.

023 50 UNITS TYPE MTU BA837 MERCEDES ENGINE'S for use in Marine/Naval or Generator

MTU Typ 837 BA 500 1 Turbo Diesel mit 660 HP und 8 Cylinder

All engines are, bench tested, and in good working order 50 up 600 hours

The max running hours: 600 - 1000.

PRICE: € 7.500 each, complete purchase only,

Volume: 14 engines with cooler in 1x 40ft container.

024 Used chickens / poultry farm equipment, automatically, electrically steered. Used chickens / poultry farm equipment, automatically, electrically steered.

for hens and egg production

Chickens / poultry farms 5 units

Automatically for approx. 1.6 millions hens and every day 1 egg.

For sale: completely interior arrangements - used:

Farms also suitably for fledgling and ducks – used and extremely favourably

(for fledglings inside wire can be assembled afterwards)

Electrically steered ready production lines for hens - everything runs automatically,

Original price when new: approx. 20 million DM (10 Million Euro) per farm,

Our price: 285,000 € for each farm port CIF of destination

025 1 x Used Chocolate production plant

output abt.. 1 to/h

consisting of:

1 milk powder feeding BAF 114 with pneumatic suction, screw, blower, magnet

1 sugar storage tank, 31 tons, with screw below, blower

1 Jet filter

2 powder storage tanks with screw beneath for milk powder + sugar

1 platform for both tanks,

1 steel belt line for 3 five-roll refiners and 4 conches

1 Bühler SFG 1000 five-roll refiner as pre-refiner

2 Nagema 912/3 five-roll refiners working width 1250 mm

4 Petzholdt PVS 3000 conches capacity each 3 to, as spray film conche,

with spraying system, pumps, filter, jacketed pipes, etc..

2 stirring tanks, 10 to

1 Rasch VD 100 tanks, for abt. 13 to cocoa butter,

various pumps

PRICE: € 169.000,-- EXW Germany “as it is”

026 Several Used Garbage Trucks MAN 1x Press Garbage Truck Fabr. MAN, Typ F 2002

1x Bio Garbage Truck Fabr. MAN M38

1x Garbage Truck Fabr. MAN 18.264 (M38)

027 380 pcs. Used Tractor Heads MAN YOM: 2004 - 2006

Kilometer approx. 450-650.000

Cabin XXL with air conditioner and extra heater

Front Axle: Plate Suspension

Rear Axle: Air Suspension

Rear Tyres new

Tip Matic Gear

Price from 15,500 Euro to 28,000 Euro per pice FOB Europe

028 VBF Brand BL 500 Book production line

Format:

Bookblock: max. 380 x 270 x 70 mm

min. 100 x 100 x 5 mm

Book: max. 390 x 280 x 75 mm

min. 105 x 105 x 7 mm

Capacity: max. 50 Takte/min.

Condition: used, good, see photos

can be inspected still in working condition

Delivery time: approx. January 2010

PRICE: € 155.000,-- EXW Germany.

029 30 + 2x50 pcs. Used Tractor Heads MAN YOM: 2004 / 2005

Kilometer: appr. 450-650.000

Cabin: XXL Cabin with Air Conditioner and extra Heater

Front Axle: Plate Suspension

Rear Axle: Air Suspension

Condition: Absolutely top, like new.

Price from 18,500 Euro to 23,600 Euro per pice FOB Europe

030 1 Used Cereal bar line

Manufacturer: Sollich, Baker Perkins, Tevopharm, and others

Type: Cereal bar line

Year of manufacturing: in operation since 1984 output capacity: line capacity 1000 kg/h

Details / different: for Cereal Bars and Cocos bars (with fat) as well as standard bars

automated mixing system for dry ingredients

continuous cooking

forming and cooling process

length roll cutting knifes and guillotine

chocolate tempering and coating machine with cooling tunnel

3 lane horizontal sealing machines, box filler and manual packing stations

031 105 pallets PARTS FOR MOTOR CARS

as brakes, oil filters, sealings, and many other items mixed for passenger cars and trucks

built around 1986 - 2004 for MB, Ford, Fiat, Peugeot, VW, Japan. Fahrzeuge, and other.

Price: € 65.000,-- for all EXW.

032 17 units MAN 440 TGA (SZM) Standard - SZ USED TRACTOR HEADS

200.000-300 000 km

324 kW / 441 PS(HP), Diesel

Gearing: Automatic

Emission Category: Euro 5 Engine

First Registration: 2007

Aircondition

Color: white

Axles: 2

Total Weight: 17990 kg

Cabin: Long Distance Traffic

Radformel: 4x2

Feature

Retarder/Intarder, Heater, Cruise Control

Description: 1 Owner only, Condition as new,

PRICE: € 48.000,-- per unit as is where is.

033 Used Mercedes Actros Tractors Heads

USED TRACTOR HEADS (articulated lorries)

Kilometre from 400.000 to 540.000 KM,

Made: Mercedes-Benz

Typ: 1841 LS/36

Design: Articulated Lorry m.S-Kupp

Motor No. (Type): 54194400355004

Total Weight: 18.000 kg

Motor: DieselE3

Wheel Base: 3.600 mm

Suspension: Air Suspension

Cylinder Capacity: 11.946 ccm

Operator`s Cab: Megaspace

KW / PS: 300/ 408

Initial Registration: 11.10.2004

Features: Retader, (proximity-controlled) Cruise Control, Gauge Control

PRICE: € 28,500.-- per piece EX Location.

034 1x used „HARTL“ Power Crusher PC 1060 / CAT C7

for building rubble and recycling field.

Build 2007 (abt. 2300 working hours).

Composed of:

Prallmühle PC 1060,

Einlauföffnung: 1000 x 600 mm,

Antriebsaggregat CAT C 7 (187 kW),

Vibrationsrinne mit Vorabsiebung,

Permanentabscheider,

Raupenfahrwerk,

Funksteuerung

PRICE: € 176.000,-- EXW “as it is”.

035 13 Used Van Carrier „Noell“ + „Kalmar Sisu“

PRICE: € 38,500.-- per piece EXW Germany.

For at least 3 units “as it is”

036 1x Poultry processing installation with a capacity of 1.000 - 3.000 birds per hour

with NEW and RECONDITIONED parts

Bird type : broilers

Capacity : 1.000 - 3.000 birds per hour

Overhead Conveyor

* type * T-Track profile, galvanised steel

* chain * 8 mm galvanised hardened steel

Shackle distance * 6 inch (0,1524 meter)

Live weights : minimum 800 gram

: maximum 2.400 gram

Bleeding time : 90 – 120 seconds /about 20 meters track

Scalding time : 3,00 minutes

Scalding temperature : 54 - 60?C

Water chilling time : 40 minutes

Product variation : to obtain a optimal result the weight variations within the

flock may not exceed +/- 250 gramm.

End Product : Frozen whole birds (water-chilled) packed in

polyethylene bags

037 1x „Lindemann“ USED 2,000 hp CAR / SCRAP SHREDDER PLANT

Manufacturer: Metso-Lindemann, Düsseldorf/Germany

Shredder type: Kondirator, ZK 210 x 260

Shredder data:

Drive power: 2,000 hp or 1,500 kW

Design capacity: 70 – 90 t/h

Intern. width

feeding chute: 2,100 mm

housing: 2,500 mm Year of commissioning: 1993

Condition: well mantained completely assembled, operational

Location: Western Europe

The plant was continously maintained and is still in operation.

The complete system isoperational an can be demonstrated.

The complete documentation is available.

The disassembly cost are not included in the price and can be offered separately.

Price: € 2,200,000.-- “as it is where it is”..

038 Used “LIEBHERR” Crane Type LTM 1400 with “LIEBHERR” Crane pdf-file complete specification

Complete as in attached documentations

Lifting capacity: 400 t

Year of Construction: 1998

Make: Liebherr

Price: 1.340.000,-- C&F Antwerpen

Pictures and Details: attached.

Viewing: to be agreed with us.

039 Used Turkey Slaughtery „STORK“

Complete as in attached documentations

Price: € 798.000,-- EXW Germany.

Pictures: attached.

Viewing: to be agreed with us.

040 2 - Axcel Trucks

Mercedes-Benz and MAN built : 1998 - 2004

CONCRETE MIXER and TANK TRUCKS

Mercedes-Benz and MAN built : 1997 - 2001

041 1x used Asphalt Mixing Plant “Ammann“ Type EURO MEA 160/5/6, 160 tons/h

Y.o.C.: 1989

Output: 160 t/h

Drying Drum: AMMANN T 2280, 160 t/h, - 4%

Mixing Tower: AMMANN MEA 160-5/6

Mixer: AMMANN MA. 3.0 Eddy Mixer 2,0 To./Charge

Screening: 5 Fraction, 1 Bypass

Hot Mix Storage 6 Silos, Total ca. 43 t

Predosing: 5 new Pieces à 10.0 m³

Filter: LUER Cloth filter, 35‘000 Nm³

Burner: Oertli Combined burner light oil, liquid gas

LoadingSilosTo 4 x 27,5 To. = Total 110 To.

Filler Silo: 3 1 x reclaimed filler 100 t, 2 x importet filler 30 + 20 t

Bitumen tanks: 5 3 Pcs. à 50’000 Ltr. 1 à 30'000 + 18’000 Ltr. thermaloil heated

Bridge balances 1 à 50 t. à 15,00 m x 3.50 m

Control Unit: Computer Ammann PSA 2000

Condition: Very good durable and maintained plant, 11. 2008 at work !

Price: € 390.000,-- EXW incl. Dismantling - plus costs for loading.

042 1x used Asphalt Mixing Plant “Ammann“ 55 To./h Y.o.C.: new built-on 1985 / 2007

Output: 55 t/h – 4%

Drying Drum: Ammann T 1660

Mixing Tower: Ammann

Mixer: Ammann Eddy Mixer 750 kg./Charge

Screening: 3 Fraction + 1 Bypass, new screen 2006

Predosing: 7 Pcs. à 7,5 m³, abrasive laminations rev. 2007

Filter: Lühr 18'000 Nm/3, new Filter Hoses 2007

Burner: Oertli AR 35, light Oil Burner

LoadingSilos 66T t: 4 x 16.5 t, = Total 66 t

Filler Silos: 2 x reclaimed filler 30 t + 20 t, 1 x imported filler 50 t

Bitumen tanks: 3 Pcs. à 30’000 Ltr. thermaloil heated

Oil tanks: 1 Pcs. à 20'000 Ltr.

Control Unit: Stoll-Ammann, in container installed

Bridge balances: 1 à 44 t / 12 m x 3,4 m, measuring system new 2007

Condition: Very good durable plant will be in function till end of march 2008eady dismantled.

Price: € 180.000,-- EXW incl. Dismantling - plus costs for loading.

043 1 NEW MOBILE DRILLING AND WORKOVER RIG

1 NEW MOBILE DRILLING AND WORKOVER RIG

For Oil, Gas and Water boring.

Made in Germany.

As in attached technical description.

Price: € 4.700.000,-- EXW Germany, without packing.

Delivery time: at once.

Warranty: 12 month.

Origin: Germany.

044 1x used Asphalt Mixing Plant “Ammann“ 55 To./h Y.o.C.: 1965 / new built-on 1985 / 2007

Output: 55 t/h – 4%

Drying Drum: Ammann T 1660

Mixing Tower: Ammann

Mixer: Ammann Eddy Mixer 750 kg./Charge

Condition: Very good durable plant will be in function till end of march 2008

Already dismantled.

Price: € 198.000,-- EXW Europe incl. Dismantling.

045 Injection Moulding Machine

Description and Price:

Reduced Price: 189.000,-- € “as it is” EX Germany already dismantled.

Manufacturer: KRAUSS MAFFEI

Type: KM 1600-3500 DP MC

Production hours: 801 hrs

Operating hours, total 3,018 hrs

Built in: 1999

Price, new €1,000,000.00

Price: bid invited

046 2 x MTU (DE) New MTU Diesel's 6R183TE93

with ZF 311A Gear Ratio 1.759:1

Location: Germany

Year built: 2003

Weight: 1,500 kg (~ 3,308 lbs)

No. of cylinders: 6

Power: 434 kW (590 HP)

Category: inboard, diesel

Condition: as new

Preis / Price: € 65.000,-- per pieces EXW Germany.

(factory price € 750.000,--)

047 Tetra Pak TBA 9 bl 200 ml, approx. year 1990 overhauled

Description and Price:

Tetra Pak TBA 9 filling machine

200 ml base line

capacity: 6.000 TP/h,

Control system: AB,

year of manufacturing: approx. 1990,

in good conditions, overhauled

Price Euro 128.000,-- EX Works Germany

The following could be supplied at Extra- Price:

Tetra Pak Straw Applicator

Tetra Pak Tray Packer 31

Conveyors

048 1x Complete Sandwich Panel Line

PU sandwich panel line:

For producint:

– Doors

– Industrial sandwichpanels ( wall- and roofpanels)

– Cooling units

– Modular coldstores

– Coldboxes ( all-in-one)

Panel thickness – from 60 mm until 200 mm

Length: 3 mtr until 8 mtr

Standard panel: 1 side steal 0,63 mm PUR density 35kg/m2

Always reconditioned and very good maintained in production untill end of 2006

Hydraulic press 14 mtr x 3 mtr

Injection system Krauss Maffei

Decoiler max weight 7 ton.

Built Original beginning 80’s

Loaded on flat container and in containers or /trucks.

Price: € 389.000,-- EXW already dismantled, all drawing available.

Inspection: to be agreed with us.

049 1 HELICOPTER “BELL 230

Airframe: 1733 TT

Landings: Arial10

Empty Weight: 6191.3 lbs

Engines: 1641 TT

Fresh Annual: Oct 2007

Interior: 8-Place Light Gray Leather Executive Seating w/gray Carpet (2006)

Exterior: Black Metallic (2006)

Price: US $ 3,300,000,-- EX Location

050 1 HELICOPTER Mod. „Schweizer 300 Hughes 269 C“

as in attached specification list.

Built: 1999 / 840 running hours / in very good condition

Price: € 250.000,-- EXW Germany.

(Counter bids will be carefully proved)

052 LIFE- HELICOPTER Type EC 135 T1

incl. full medical equipment

Typ: EC 135 T1.

Built: 1998.

Location: EUROPA . Spain

Condition: very good.

regularly inspected.

still in action.

complete with all medical equipment.

Price: € 2.895.000,-- EX Location Germany.

052 All Kinds of Sanitary Equipments

as sickbeds, wheelchairs, bath-tub lifts, toilette chairs and many other articles for nursing

in best quality in NEW and USED

as in attached prospect

PRICES: On request, pl. let us have your actual requirements stating artiches,

quantities new or used etc. to enable us to submit you our special offers.

DELIVERY: EXW Germany.

Parking and skipment will be arranged.

053 All Kinds of Sanitary Equipments

as sickbeds, wheelchairs, bath-tub lifts, toilette chairs and many other articles for nursing

in best quality in NEW and USED

as in attached prospect

PRICES: On request, pl. let us have your actual requirements stating artiches,

quantities new or used etc. to enable us to submit you our special offers.

DELIVERY: EXW Germany.

Parking and skipment will be arranged.

054 1 USED Mobile Magnetom Impact / Expert phased array 1.0 Tesla

(Spinn Thomograph MRI Anlage) on trailer (without truck)

Installed : 1997

20m/t power gradients, memory CD, MOD, with standart Software.

Coils:

CP headNeck-array

Body Array

Spine Array

Flex coil small

Flex coil large

small field of view extremity

Laser Camera: Kodal Dry View 8700

Trailer:

Manufacturer: "medical coach USA"

Manuf.year: 1997

with magnetic shielding, one 20 kW Diesel Generator and one waterchiller.

Voltage: 380 V / 50 Hz

PREIS: € 348.000,-- EXW Germany. - READY FOR USE -

Delivery: at once, in “turn key solation”

055 50 000 pcs. Injection Nozzles for Mercedes. for models: E, C and Sprinter up 2001 used but all of them are proved and ready for use! PRICE: for complete stock € 8,80 p. piece EXW Germany.

056 1 Used Asphalt Mixing Plant „Alfelder/Ammann“ 110 to/h Y.o.C.: 1970 / 2005 Output: 110 t/h Drying Drum: Alfelder with Oertli Burner AR 60 Mixing Tower: Alfelder Mixer: Alfelder Eddy Mixer 1800 kg./Charge Condition: Very good durable plant, at work until end of Juli!

Preis: € 155.000,-- EX Work “as it is”.

057 Used Ammann AME 125/7 Asphalt Mixing Plant 130 To./h Y.o.C.: 1977 / 2003 Output: 130 t/h Condition: Very good durable plant Preis: € 260.000,-- EX Work “as it is”.

058 1 COMPLETE PP- FOLDING BOX PRODUCTION LINE as in attached prospect – producing folding boxes, complete with moulds. Hemscheidt HPM 1000 Built: 1995 2 cores Moulding hight 500 – 1250 mm min. 400 max. 980 Robot for 32 ltr. boxes Tool for 32 ltr. folding boxes Boxes production 32 ltr. clamp. force appr.: 1000 t shot w. PS. appr.: 2.800,00 gr. Voltage: 380-420 volts, 50 cycles with central conductor and ground. PRICE: € 259.000 EXW complete with moulds, without packing, inspected.

059 100 UNITS TYPE MTU BA837 MERCEDES ENGINES for use in Marine/Naval or Generator MTU Typ 837 BA 500 1 Turbo Diesel mit 660 HP und 8 Cylinder All engines are, bench tested, and in good working order 50 up 600 hours The max running hours: 600. PRICE: changed

060 1 CENTAUR 50 GAS TURBINE GENERATOR PACKAGE ORIGINAL DATE OF MANUFACTURER 1997. 21,867 FIRED HOURS FROM NEW Details and Pictures attached As is where is. – United Kingdom € 385.000,--

061 1 NEW ST18 POWER GENERATION PACKAGE PRICE: € 1,69 Mill. EX Work. Description: attached. Delivery: AT ONCE. Guaranty: with full warrantee. Viewing: to be agreed with us.

062 1 Used complete Cattle Slaughter Line as in attached Pictures. Capacity: 60 Cows / Cattles per hour. Built: 1993 / 1994. Producer: BANSS. Condition: very good. Price: € 489.000,-- EXW Germany „as it is“ excl. dismantling.

063 Pick Slaughter Line Capacity: 300 Picks / Hour Make : „STORK“ Year : 1993 Condition : Excellent

064 Hazardous Waste Incineration Plant 30.000 t / year – Chemical Physical Treatment Plant – Evaporation Plant capacity 120 t, combustion plant with cylindrical rotary kiln technic, afterburner chamber, gaskettle for steam generating process steam 17 t/h,28 bar, 320 grd. 2 mw-steam turbine, slagloading with scrap seperation by magnetic separator, 4-step exhaust gaz cleaning consisting: electric dust precipitation, wet wash, catalytic nitrogen removing equipment and dry absorption stage mit fluidized-solid-fuelled reactor and

fibrous filter Price: € 8,5 Mill. EXW Germany “as it is”.

065 Used Napkin Machines Manufacturer ÜC Kadersler TYpe BC3011D Year: 2000 Type BC3312D Year: 1999 Type BC3310D Year: 2001 Type BC3322D8K Year: 2000 The machines are equipped with 1-colour printing unit. Sizes: 30 cm x 30 cm und 33 cm x 33 cm Capacity max.: 700 napkins/min. with double fold Dimensions including delivery belt: approx. 5, 5 m x 1, 2 m x 2 m (each machine) Weight: approx. 1.500 kg max. PRICE: € 139.500,-- for all Machines (4 Units) FOC factory. Location: Germany Remarks: Price for order of 1 or 2 Machines on request.

066 Armoured vehicles based on “Toyota Hilux” and “Toyota Land Cruiser 105” Prices: FOB GERMAN PORT (INCOTERMS 1990). Payment: 30 % advance payment 70 % on delivery/notification of readiness, by irrevocable letter of credit (ERA 500) with suitable running time, by several vehicles diviable. Remarks: ALL OTHER CARS as DB, FORD, AUDI, RENAULT etc. CAN BE ALSO ARMOURED. Please let us know your requirements. This offer is only an example. Discounts when ordering at the same time: 2 – 5 vehicles 2,5 % 6 – 10 vehicles 4 % Delivery: Depending on quantities of vehicles and delivery times of basis vehicles.

067 Complete brick work approx.. 16-18 million pieces of stones (standard size) were manufactured per year in the a shift operation. The product assortment of the enterprise covered 70 different products. - the plant is fully functional - sale of the plant because of insolvency - production runs up to II/2003 In the scope of supply are are the following vehicles with contained: 1. 1 pieces of articulated loaders 2. 2 pieces of fork-lift trucks 3. small locomotive for tilting trucks. The factory is sold only completely and with the vehicles. The price is the total price of the plant starting from location, without disassembly, transport etc.. PRICE: € 275.000.-

068 Used Beer Filling Plant Packing: in 1 40ft. Container. Price: € 119.000,--, EXW Germany, dismantled.

069 Used Bottle filling line for plastic bottles Preis: € 139.000,--„as it is and where is“. 1 Complete bottle filling line existing of: 1 stainless steel manual debagging table, 1 rotary polybottle filler/capper, manufacturer Federal, 12 valves and 4 capping stations, 1 side labeller, manufacturer Graham, model COSA 1280-40, 1 overhead labeller, manufacturer Graham, model COUV 1280-40, 1 shrinkwrapper & heat tunnel, manufacturer Yorkshire, model S/S, +/- 11 meter stainless steel & plastic slat conveyor with 2x 90 degrees bends, lane guide with stabilisers / drive unit and outfeed roller conveyor. Bottle filler is with 5 format sets. Manuals in English.

070 Used TETRA PACK Filling and Packing Line Typ TB8-1000B as in attached specification

Preis: € 155.000,-- FCA „as it is“, EX Work in Czechia, already dismantled. Delivery: at once. Location: Czechia. Filler for soft packs: Manufacturer: Tetra Type: TB8-1000 B Capacity: 4,500 pack/h Pack size: 1.0 l Y.o.c.: 1991 Running hours: 3,000

071 Mineral + Water + Limo + Wine Bottling Factory “Nate”- Germany, complete with packing line. as in attached specification list. Built: approx. 2001. To be used with or without CO2. For filling in glass bottles of 0,25 + 0,75 ltrs. Price: € 298.000,- EX Location “as it is”. (New price for this plant DM 3,6 Mill whish can be proofed). Location: Germany.

072 Extrusion- Plant for PVC window- profiles "system petal" including tooling- installation. Built beginning 1980, completely overhauled 2006 Profile- Extrusion- installation with 1 double- screw extruder for main- profiles, used, overhauled, the double- screws and cylinder new, ( less than 100 working hours ), the production- line including calibration and cooling devices, caterpillar transport, automatic cut- off saw, vacuum- installation tilting and stacking devices. Capacity Installation with 2 extrusion lines (main profiles, additionalprofiles) about 120 000 - 150 000 meter profiles per year; about 12 000 - 15 000 windows per year with average dimensions of 120 cm width and 130 cm height, German standard. Working time per window about 1-1.5 hours Plant size production hall 1000 m2 Raw Material required: about 200- 250 t PVC- compound or granulat year (Profile- weight 1.0 - 1.6 kg /m) Employees extrusion- plant : 3 shifts / 2 workmen, ( 6 workmen) window- assembling: 1 shift, 50 - 60 windows/day ( 10- 12 workmen ) administration: 3 - 4 employees Price: € 398.000.-

073

Complete Lime Sandstone factory 21 Mio Stones Year of construction: 1978 Capacity: 21 million stones with one press Price: € 598.000,-- „as it is“ EX Location. Location: Slovenia (ex-Yugoslavien) The price includes Steel - resounds as seen in the pictures. Disassembly company can be placed.

074 Harbour Cranes 1, Harbour Mobil crane - make : GOTTWALD - type : HMK 65-29 - year : 11/1976 Price € 85.500,00 FXW Location 2. Harbour Mobile crane - make : GOTTWALD - type : HMK 280-69 (HMK 280 E) - year - built: 1983 - capacity: 45 tons - remarks : good condition

Price : € 1.050.000,00 net ex location. 3. Container Crane “ KOCKS” - Type : KOCKS - year : 1970 - Capacity: 45 t Price : € 310.000,00 netto EX Location 4. Container Crane “KOCKS” - make : KOCKS - year – built: 1972 – first in use 20.11.1972 - remarks : in good condition, constant maintenance , still working Price : € 389.000,00 net EX Location

075 PORTAL CRANE „Aumund / Demag Build 1972 / 1997 – Last TÜV inspection 2004. Price: € 46.500,-- EX LOCATION „as it is“. Location: Bayern / Germany. Photos: attached

076 Vancarrier I) 3 Pieces Vancarrier “NOELL PPH 434 HSW” Fabricate / Manufacturers: NOELL Typ / marking: PPH 434 HSW Operations start: 1998 Active since: ca. 43.600 hour's Price per each Vancarrier = 108.000,- € netto, price free of Hamburg/Bremen (FAS) II) 2 Pieces Vancarrier “SISU TERMINAL SYSTEMS 3010535-91-T” Fabricate / Manufacturers: SISU TERMINAL SYSTEMS Type / marking: 3010535-91-T Operations start: 1996 Active since: ca. 16.700 h + 19.700 h Price per each Vancarrier = 108.000,- € netto, price free of Hamburg/Bremen (FAS) All Machines are ready for practical operation. All without Warranties and guarantee.

077 1 CONTAINER DIESEL - REACH STACKER (CONTAINER STABLER) manufacturer / type: LINDE C4534TL/4 capacity: 45000 kg 35 to at load center 2000 mm, 5 high, first row 8´6“ 41 to at load center 2000 mm, 4 high, first row 8´6“ 45 to at load center 2000 mm, 3 high, first row 8´6“ 34 to at load center 3850 mm, 3 high, second row 8´6“ 16 to at load center 6350 mm, 2 high, third row 8´6“ y.o.m.. 1999 hours. appr. 170000 Price: 168.000,00 Euro „as it is“ EX German Location

078 Car / Truck Tyre Recycling Plant Attached you will find our offer about our recycling plant for car and truck tyres without rims. The output capacity of this plant is approx. 1,8 t/h, final granulate size is < 4 mm. Not included in this price are the costs for engineering, transport, mechanical and electrical installation, we are not able to estimate this costs in this early state. It also depends on the country where the plant should be installed. Price: € 3.490.000,-- “as it is” EX WORK Germany.

079 NEW SEMI – AUTOMATIC PET BOTTLE BLOWER – Double Head Sretch Blow Moulding Machine. for producing PET Bottles up to 2 liters. Capacity: about 800 bottles / hour. Peratinal pressure: 12 – 15 bar Conection power: 6 – 8 kW Additional cooling for tropical countries

Mould – chance: in max 30 min. Weight: about 470 kilos Required space: 1,01 x 1,11 x 2,16 mtrs. Price: a) PET BLOWER = 38.100,-- Euro b) Mould 0,5 L, 1,0 L, 1,5 L, 2,0 Liters = 2.800,--Euro c) Yaser Control = 2.800,--Euro d) Additional Cooling = 900,--Euro e) Additional Mould Cooling = 900,--Euro f) Compressor = 4.400,--Euro EXW Germany Delivery time: 4 – 6 weeks offer firm order. Origin: Made in Germany. Garantee: 12 months after delivery. Remarks: We could also supply 1) PET Blowing Machines for a capacity of 400 Bottles per hour. 2) Complete pressure Filling, Capping and Labelling Lines for 2000 bottles per hour. 3) PET Can producing Lines.

080 Complete Plant for Oxygen Production Special Sales-Price 1.250.000,- Euro Plant for production of 3,000 Nm³/h oxygen with a purity of min. 99, 5 %-mol. O2. In the following please find our budgetary proposal of a second hand air separation plant, manufactured by Air Liquide, Engineering by A.L.E.C. Canada. The air separation plant is located in South – Europe, operating with 50 Hz. The plant was started-up in 1976 and was in operation till end of December 1999. The particular features of the proposed air separation plant are the design and the completeness of the plant and the excellent technical conditions for production of oxygen( LOX). Additional to your inquiry the plant is able to produce 80 Nm³/h pure argon. Therefore some quantities of H2 are needed for further purification. Since this plant has for the Main Compressors radiator coolers, those radiators have to be re-calculated and adapted to local maximum ambient temperature conditions.

081 3 Colour Offset Printing Machines HEIDELBERG GTO - 52 built 1987. Price: € 14.900,-- EXW „as it is“. Location: Germany. HEIDELBERG GTOZ - S52+ built 1995. Price: € 39.900,-- EXW „as it is“. Location: Germany. HEIDELBERG Speedmaster CD 102 - 4 built 1996. Size: 720 x 1020 mm. Printing amounts: 17,3 Mio. Voltage: 380V / 50Hz. together with a lot of accessories. Price: € 289.000,-- EXW „as it is“. Location: Germany.

082 Heat Panel Production Plant Built: 1985 – 1998 Composed of: Welding Line Description There are two welding lines available at the site, one line is dedacated to producing single radiators. The other line is dedicated to producing double radiators. The lines are set out in a flow process configuration, beginning with the multispot operation and concluding with the final assembly/testing. Each station is connected with transfer conveyors. The lines operated until July 2005.

The lines were maintained to the highest standard during their working life with a strong emphesis placed upon downtime reduction. The lines operated on a two shift basis. Product Range The lines are capable of producing radiators ranging in height from 285 mm to 900 mm. The radiator lengths produced were 500 mm to 3000 mm. The lines arte set to produce two connection pruduct. The doubles line is capabable of producing four connection product in singles or doubles. Price: € 985.000,-- “as it is –where it is” EXW West Europe. Remarks: This factory could be rebuilt at destination.

083 Injection Moulding Machine Reduced Price: 339.000,-- € “as it is” EX Germany. Manufacturer: KRAUSS MAFFEI Production hours: 801 hrs Type: KM 1600-3500 DP MC Operating hours, total 3,018 hrs Built in: 1999 Price, new € 1,000,000.-- Price: bid invited

084 COMPLETE USED PET BOTTLE RECYCLING PLANT Capacity approx.: 1000 kg/h (dependent of bottle waste quality) Construction year: 2002 Plant consisting of following main components which explains the process as well: 1. washing Crusher / Granulator 2. friction cleaner with blower 3. screen unit 4. feeder belt and classifying belt 5. belt with magnet for metal classifying 6. bale cutter 7. transportation belt 8. screen unit and cyclone 9. star feeder and hot washing unit 10. feeder screw with vertical friction cleaner 11. cyclone with mixer / inlet guide tank 12. separating tank and friction cleaner with blower 13. screen unit with vertical friction cleaner 14. cyclone with recleaner - washing system 15. double friction cleaner with blower 16. screen unit with fresh water connecting system 17. cyclone with mixing silo, feeder screw & shaking screen 18. magnet classifying, cyclone dust catcher + blower 19. cyclone - silo - feeder screw , decant position for PET flakes Installed system for recycling of PE/PP waste from PET bottle 14.A.air-cylone--silo-screw-decant position for PE/PP flakes 15.A. screen unit, cleaner-water tank-waste Total space requirement approx. 500 sqm x 8 m height Installed electrical power approx.: 715 kW Average consumption approx. 550 kW Water consumption approx. 2500 l. per hour Plant can be viewed in running condition! Photos: attached. reduced Price: EUR 950.000,-- ex works, including 6 month warranty

085 NEW PET BOTTLE RECYCLING PLANT Made in Germany for unpressed and presorted PE-bottles. Description in short version of the scope of supply. Water treatment is not included in the quotation. However, the treatment can be quoted in addition if necessary.

I. Input capacity 1.350 kg/h, output capacity 1.000 kg/h PRICE: € 1,170,000.-- EX Work Germany

086 Several Wood Working Machines List with Prices and Pictures here Ross Panel Saw Holzma HQB 92/X/10/43 (1995) cutting length: 1.000 mm, cutting depth: 4.300 mm, motor: 13,5 kW, scoring unit: 2,2 kW, saw blade protection: 110 mm, 2 clamps, CADmatic 3.0 Price: 23.500,-- EUR

Cross Panel Saw Scheer PA 6062 PT 15x65 (2003)

cutting length: 7.100 mm, cutting depth: 1.500 mm, scoring unit: 2,2 kW, saw blade protection: 85

mm,

4 clamps, DNC-AT/Siemens S5 - U95, 2 x 8,2 KW length saw, motor traveling, 1 x 9,0 KW cross saw

Price: 63.000,-- EUR

CNC Working Center SCM RECORD 220 TVS

working dimension: 3.200 x 1.250 mm, milling unit ISO 30: 7,5 kW with C-axis, 10-fold tool changer,

drill head vertical, drill head horizontal, PC NUM 1040/1060, Autoset 2

Price: 42.000,-- EUR

CNC Prrocessing Plant Morbidelli Author 510 Super (1998) working dimension: 3.200 x 1.200 mm, milling unit ISO 30: 7,5 kW with C-axis, 10-fold tool changer, drill head vertical, drill head horizontal, TRIA 7500 Price: 48.900,-- EUR

087 about 20 tons ELECTRIC MOTORS composed of: about 9/10 tons Original ABB practically new. about 10/11 tons SIEMENS, VEM, and other, used Capacity: from about 0,5 KW – about 30 KW. Price: € 1,80 per Kilo EX warehouse in Danemark. Photos: attached.

088 DIESEL POWER GENERATORS with trailer from European Army, nearly new, only shortly used, in good condition. European Origin. Prices FOB warehouse for minimum 10 Units. Price for taking all 67 generators = € 189.000,--

089 CHEESE-MAKING LINE line Complete line for Gouda type cheese, Euroblock format (50x30x10cm). This line includes: 2 cheese vats, draining vessel, automatic mould cover placer, cheese press, Cheese mould cover lifting and mould turning and cheese outblow device, automatic scale for cheese, mould and cover washing machine and 200 pieces of micro perforated moulds (Make: Laude) with cover. Total capacity: up to 150.000 ltr/day (15.000 kg/day). Price: € 349.000,-- FCA „as it is“, dismantled.

090 AIR-CATHEDRAL 1 - character "Struckmeyer" Specification: Fabr. Struckmeyer Standard approximately 58.000 x 35.000 mm maximum Height outside-cover approximately 11.000 mm Foyer-skin with quite-isolation Inner-heavens 2 blanket-fans Revolving door 2 emergency exits Compact-fan-installation Fabr. Nolting Air-performance 26.000 cbm / h

Input fan-motor 7,5 kilowatts / h Heating Power 250.000 WE Heating: gas Reserve-fans Drive diesel engine Inner-area equips á 2.000 W with 12 blanket-emitters (high pressure-steam-lamps) present utilization as tennis-hall with 4 game fields Price: € 79.000,--.as it is" EXW Germany Delivery: immediately. Inspection: to be agreed with us. More details on request.

091 AIR-CATHEDRAL 2 - character "Struckmeyer" Specification: Fabr. Sruckmeyer Standard approximately 34.000 x 31.000 mm maximum Height outside-cover approximately 11.000 mm Foyer-skin with quite-isolation Inner-heavens 1 blanket-fans Revolving door Emergency exit Compact-fan-installation: Fabr. Nolting Air-performance 10.000 cbm / h Input fan-motor 4,8 kilowatts / h Heating power 163.000 WE - Heating: gas Reserve-fans Drive diesel engine Inner-area equips á 2.000 W with 5 blanket-emitters (high pressure-steam-lamps) present utilization as tennis-hall with 2 game fields Built. 1996 Price: € 59.000,--.as it is" EXW Germany Delivery: immediately. Inspection: to be agree.

092 NEW ELECTRIC CABLES about 50 tons NEW ELECTRIC CABLES copper cables in bobing, as in attached stock list. Price: € 3,95 per kilo EX our warehouse in Italy. 2) about 50 tons NEW ELECTRIC CABLES aluminium cables in bobing for medium and low voltages, as in attached stock list. Price: € 3,65 per kilo EX our warehouse in Italy. Photos: attached. Delivery: at once. Origin: E.C.

093 COMPLETE MELT SHOP for sale FUCHS/ DEMAG Electric Arc Furnace Water Cooled Panel and Roof Shell Diameter : 6.75 m Oxyburners, Oxygas (4 x 2.5 MW) RCB (2 x 2.5 MW), Tap Weight : 145 tons Arc Heating with Stirring Transformer Rating : 35 MVA Secondary Voltage : 200 - 400 Volts Vacuum Degassing or Vacuum Oxygen Decaburisation Vertical 4 Strand Billet Caster, Ladle 85 - 90 tons Nominal Transformer Rating 65/54 MVA Secondary Voltage : 200-400 Volts Secondary Current : 32 kA Electrode Diameter : 350 mm Pitch Circle Diameter : 900 mm Vacuum Degassing or Vacuum Oxygen Decarburisation

Remote Controlled Water Cooled Oxygen Lance Stroke : approx. 5 m Speed : max 10 MPM Argon / Nitrogen Shrouding Facility Vertical Continuous Caster, Ladle Size : 85-90 ton Coiled Bar Mill: Stands : 2 Davy Stands : Brightside (1 to 4) (6 to 11) Stands: Morgandshammer (12 to 17) Feed Stock : 140 mm Square, 13 m long, 1900 kg Natural Gas and Gas Oil Back-up Rounds 13.5 - 43-5 mm, Squares 14.O - 30.0 mm Weight Range : to 2 tons Finishing Speeds : 3.5 -17.5 M/S Covered Receiving and Holding Area Roughing Mill : 6 Stands, 0.1,02 & 1-4 Intermediate Mill : 4 Stands, 6 to 9 Finishing Mill : 8 Stands, 10 to 17 Furnace: Continous Multi Zone Walking Beam with Manipulator Handling Equipment to Discharge Billets Charging : Rear Charged Fuel Type : Natural Gas Firing Zone : 8 Zones in total, 3 Heat and 5 Soak Max. Temperature : 1250 degrees C Computer Conctrolled, Buit In Monitoringcapacity : 60 M billet, 45 in Heat Zone, 15 in Soak Zone Descaler: Roughing Mill : 6 Stands, 01.2 &1 to 4 Intermediate Mill : 4 Stands, Stands 6 to 9 Fifishing Mill: 8 Stands, Stands 10 to 17 Shears: After Stands 4 & 9 to Discard Front Ends Coiling Units : 3 Coiling Tubs with Optional Oscillating Speed Coil Dimension : 1377 mm Coil OD, 1000 mm Coil ID, 1800 kg Coil Weight Coil Cooling 2 Blow Stations per Line, OG Slats Inspection, Coil Internal Transportation More complete Specifications and Photo's available.

094 Qty. 2 KOMATSU 530M (150Ton) haul truck. Incl. EROPS, AC. 23000 Frame Hours $ 410,000.00 USD each EX-Site further information available on request.

095 Complete Brick-Work 32 Mio. NF stones p. a. Price: € 1.460.000,-- excl. Dismantling. Location: Germany The production ran until approximately July 2004 Transportation approximately 60 - 80 HEAVY GOODS VEHICLES, according to dismantle. Payment 100 percent in advance, per T/T or devoid of. Immediately sell possible. Capacity: 32 million NF stones, NF = 24x1 1,5x7,1 cm) The Capacity can be increased to approx. 40-45 million Stones if the oven becomes enlarged. At present, the oven is approximately 60 meters long. Oven heated with natural gas. The work has an ultramodern electronic control Siemens S5. In this work, U-hulls were manufactured. The production of this very high-quality and costly products is possible only with a good technology. Since the machines in this work have a very good quality standard, such special-products could be produced here, too. The work was extended frequently and improved as well maintained and overhauled. The work was closed because of overproduction in Germany. The work is technically on super condition and on the basis of the latest technology.

It will be sold without vehicles like forklifts etc.

096 Complete insulating glass-/ window glass production 1. The glass is cut to size on the glass blade table. The glass blade table can get angekippt to almost 90? so that also big glass plates can be transported comfortably. These can be delivered (see holes in the plate) below the plate's situated roles so that a unfolding (further transport) the glass plates to the wash and dry machine is ensured. 2. The ready cut glass reaches the wash and dry machine and is washed and dried here in an operation. (automatic move, inclusive of treatment of water) 3. An on both sides adhesive foil is stuck on to the spacers (aluminium profiles) with a device (picture Iso 4) on the two sides. The spacers are then provided with the corner verb Indians by means of a little saw on your measure zuges?t and respectively on a side. (Corner verb Indian from Plaste, picture Iso 12 A) present be the spacers filled with dry means. (see picture Iso 3 A/dry means filling equipment) the still open parts of the spacer profiles are simply put into the filling device and filled automatically. The ready filled spacers will end obligedly to the corner verb Indians' frame ready for one about the still free ones now. 4. The ready spacer framework is stuck on to a plate. (the protection foil removes) the other plate gets blatantly and stickily following. 5. For the end this is sealed from two plates of existing glass package with the Hot Melt machine. The isolating glass plate is ready. At use of a gas filling (argon) between the two plates a side of the spacer framework remains open, the plate is filled with gas and then locked. (by means of adhesive or rubber seal) All consumption materials like spacer, spacer verb Indian, spacer adhesive film, dry means, Hot Melt sealing, are at a reasonable price and on the market freely available. The supplier sources are submitted to the customer at purchase of the installation. Price: € 69.000,-- „as it is“ EX work.

097 Conveyer with Vacuum Lifting Unit RBS Built: 1992 Condition: good Description RBS Conveyer: The installation induces receptacles, cartons and piece-goods with a singles-weight economically up to 150 kg and gentle. System proved themselves noiseless run. Very different individual complete-solutions can be combined - built system is modular. The manufacturer of this role-bond was serving the leading companies world-wide regularly. Data: The outside-dimensionses amount to 35 x m. in 27 maximum Burden 150 kg All roles driven. With light-barriers to the regulation of the capacity Role-track partially over several floors. With elevator to the camps z.B. in the shelf-system. Individually usable there \ \ \ "kit-system \ \ \." Complete pack-railway station co equipment-cars and records. Vacuumlifting unit with 150 kg of load capacity. Even if you, despite which ream installation, still a module should be missing, you can get it with the manufacturer without problems. The installation is reduced and packs on 3 BDF change-bridges.The bridges can be used for the transportation against charge. Also a purchase of the bridges is possible at 600 € . Price for the complete installation inclusive Vacuum lifting unit: 49,000 € EX camps FRG (The price brand new was 625.000 €). Delivery: immediately Remarks: The plant is already dismantled.

098 Wheelloader ?Komatsu? Typ WA 470-3 Build: 2000 Working hours: 9200 Std/h Mit grossr Schaufel 5 cbm / with big shovel 5 cbm New painted

Tyres with about 10% tread Price: € 89.000,-- ex location Germany

099 Used Tower slewing crane with under curriage. Make: ZEMAG Model: Movilift 200 Built: 1993 Price: € 23.900,-- „as it is“ FOB Germany

100 Used Offset Printing Machine, 2 coloured. Technical details max. paper size: 890*1.260 mm smallest size: 500*700 mm image area: 880*1.260 mm speed: 7.000 sh/h power supply: 50 Hz - 31 kW length: 9.890 mm width: 4.320 mm height: 2.650 mm weight approx.: 22.000 kg Delivery: EXW Estland, loaded. Shipment: immediately Preis / Price: € 29.000,-- EXW

101 COMPLETE TOILET PAPER PRODUCING PLANT As in website attached MANUFACTURER DGI YEAR INSTALLED 1980 WIDTH ON POPE REEL 2.100 MM SPEED MAXIMUM 550 – 600 M/MIN CAPACITY 30 TPD PRICE: € 1.980.000,-- EX work as it is - where is. Location: South West Europe Inspection: to be agreed with us. Remarks: More information on request.

102 Complete Hospital Equipment (80 Beds) Price: € 395.000,-- „as it is“ EX Location The offered hospital was in operation up to the 30.08.1999, all offered appliances and provisions are not discarded or defective but is according to the current German rules and checks (regular T?-examinations) etc). It includes following departments, that are equipped in order of the usual German standard:

• Surgery with 2 operating rooms

• Inside department with endoscopy

• Urology

• Gynecology and delivery-station

• Infant-station

• X-ray-department

• Ultrasound-department

• Bed-station with 80 beds

• Need-power supply, complete) Following appliances and provisions like about peculiarities:

• Operation-area 1

• Narcosis. gas. Monitor

• Blood pressure. Monitor

• Defibrillator

• OP. Table

• Big OP light

• HF. Surgery

• Cold-light-sources

• X-ray-observers

• Long-time. EKG. appliance with connected PC

• Standardized medical scales

• Electric seat-scales

103 DESSERT CREAM PRODUCTION LINE capacity 2.000 l/h. The infusion and vacuum chambers are mounted on a stainless steel frame including APV product pumps APV watering pump for vacuum Condenser & balance tank complete valve system hot water system APV N35 plate heat exchanger built as a pasteuriser extra set of plates for pasteurizer aseptic water system for homogenizer APV RANNIE 80/100 ASEPTIC homogenizer external CIP plant steam regulation valves s.s. control panel & main electric panel full documentation, This plant has been revised regularly each year by APV. This installation runs on dessert creams, but is capable of sterilizing tomatoe paste (without pieces). Excellent condition. May still be visited in operation. See attached photos. Products are filled in TETRAPAK (not included). Location: Spain. Price: EXW Spain „as it is“ 398.000,00 € dismantled.