FUEL POLISHINGEQUIPMENT MANAGEMENT SOLUTIONS

You depend on your generator to power your operation at the most critical times. Don’t let poor fuel quality create failure that jeopardizes your facility. Even the smallest amount of contaminants can cause:

• Loss of power• Incomplete combustion• Excessive emissions• Injector failure

Even if tested weekly for a minimum of 30 minutes as recommended, an Emergency Power System (EPS) rarely shows any signs of problems. It’s when the EPS is required to run for an extended period of time, like in an emergency situation, that failures can occur.

During this scenario, all of the contents within the tank will be suspended in the fuel. If the filters on the diesel engines are overwhelmed by contaminants suspended in the fuel, then the EPS will fail due to clogged filters.

Maintaining a fresh supply of fuel for an EPS is not as difficult as it once was. It is now possible to filter fuel and clean the tank simultaneously, rather than emptying the tank completely and disposing of contaminated fuel with on-site fuel polishing.

800-538-1020www.ClevelandBrothers.com

STAGE 1Oxidized Fuel

STAGE 240% Polished

STAGE 380% Polished

STAGE 4Polished Fuel

CB_EPG_Fuel_Polishing_Handout.indd 1 10/13/17 8:27 AM

Erie

Clarksburg

Lantz Corners

Manada Hill

Wilkes-Barre/Scranton

New Stanton

Milesburg

BAC 70829/10/17

800-538-1020

CLEVELAND BROTHERS COMMERCIAL ENGINE LOCATIONS

Clarksburg, WVRoute 76E and Route 50304-842-2222

Erie, PA3950 Depot Road814-898-3388

Lantz Corners, PA3105 Route 219814-778-5250

Manada Hill, PAI-81 Exit 77717-526-2121

Milesburg, PAI-80 Exit 158 & Route 150 N.814-355-3500

New Stanton, PA190 Earnhardt Drive724-861-6080

Wilkes-Barre/Scranton, PA441 Highway 315800-922-8630

Fuel polishing is the process of reversing corrosion. It removes water, sludge, dirt and other contaminants from your fuel that have built up in your tank over time. The NFPA recommends that steps be taken to maintain the integrity of your fuel (NFPA Standard 110). Taking advantage of fuel polishing services from Cleveland Brothers will ensure that your fuel is clean, dry and free from water and dirt to keep your engine and fuel in optimal condition.

Trust our experts to diagnose your fuel, then clean, dry and restore it to clear and bright condition without even entering your tank.

Cleveland Brothers uses a Mobile Fuel Polishing System to efficiently and safely clean and restore your fuel to pristine condition. This system is designed for tanks with contaminated fuel that require the removal of:

• Water• Sediment• Sludge Accumulation

Contact your local Cleveland Brothers location for more information on fuel polishing.

www.ClevelandBrothers.com

CB_EPG_Fuel_Polishing_Handout.indd 2 10/13/17 8:27 AM