3
SOLTEQ ® ORIFICE AND FREE JET FLOW MODEL: FM 25 T HIS Orifice & Free Jet Flow (Model: FM 25) apparatus consists of an adjustable head tank with orifices of different diameters and a jet trajectory tracer. The orifice is installed at the base of the tank by means of a special wall fitting which provides a flush inside surface. The adjustable head tank is fed with water from a Hydraulics Bench. The head is maintained at a constant value by an adjustable overflow and is indicated by a level scale. A jet trajectory tracing device allows the path followed by the jet to be ascertained. Levelling is achieved by means of an adjustable feet. This equipment can be used for calibration of two orifices of different diameters. EXPERIMENTAL CAPABILITIES Velocity coefficient for a small orifice Discharge coefficient of a small orifice for constant head flow and variable head flow Comparing the measured jet trajectory with that predicted by simple theory SPECIFICATIONS Orifice diameters : 4.0 mm and 8.0 mm Jet trajectory probes :8 Max. constant head : 450 mm Tank diameter : 200 mm REQUIREMENTS Hydraulics Bench ( FM 110 ) Equipment for Engineering Education & Research

Equipment for Engineering Education & Research ORIFICE …solution.com.my/pdf/FM25(A4).pdfORIFICE AND FREE JET FLOW MODEL: FM 25 T HIS Orifice & Free Jet Flow (Model: FM 25 ) apparatus

  • Upload
    others

  • View
    15

  • Download
    0

Embed Size (px)

Citation preview

SOLTEQ®

ORIFICE AND FREE JET FLOWMODEL: FM 25

THIS Orifice & Free Jet Flow (Model: FM 25) apparatus consists of an adjustable head tank with orifices

of different diameters and a jet trajectory tracer. The orifice is installed at the base of the tank by means

of a special wall fitting which provides a flush inside surface. The adjustable head tank is fed with water

from a Hydraulics Bench. The head is maintained at a constant value by an adjustable overflow and is indicated by

a level scale. A jet trajectory tracing device allows the path followed by the jet to be ascertained. Levelling is

achieved by means of an adjustable feet. This equipment can be used for calibration of two orifices of different

diameters.

EXPERIMENTAL CAPABILITIES

♦ Velocity coefficient for a small orifice

♦ Discharge coefficient of a small orifice for constant

head flow and variable head flow

♦ Comparing the measured jet trajectory with that

predicted by simple theory

SPECIFICATIONS

Orifice diameters : 4.0 mm and 8.0 mm

Jet trajectory probes : 8

Max. constant head : 450 mm

Tank diameter : 200 mm

REQUIREMENTS

Hydraulics Bench ( FM 110 )

Equipment for Engineering Education & Research

TYPICAL EXPERIMENT RESULT

SOLTEQ®Equipment for Engineering Education & Research

Our range of teaching equipment can be complemented with our

SOLDAS and SOLCAL software.

SOFTWARE & E - LEARNING

SOLDAS® - Supervisory Control & Data Acquisition

- Data Logging

- Signal Analysis

- Process Control

- Real-Time Display

- Tabulated Results

- Graph of Experimental Results

SOLCAL® - Computer Aided Learning

- Multimedia Features

- Interactive

- Graphic Simulation

- Experiment Result Samples

- Full Experiment Manuals

SOLTEQ®

Contact us for a catalog CD

SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)

Sales Office :

No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784

R&D Office :

G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023

Email : [email protected] site : http//www.solution.com.my/

AGENT:

Equipment for Engineering Education & Research

BUATAN MALAYSIA

MSC- StatusCompany