W H E R E T H E W O R L D T U R N S F O R P O W E R

Exclusively from your Caterpillar® dealer

GEP13.5-2 (3-Phase)

50 HZSTANDBY 13.8 kVA / 11.0 kWPRIME 12.5 kVA / 10.0 kW

60 HZSTANDBY 16.2 kVA / 13.0 kWPRIME 15.0 kVA / 12.0 kW

FEATURES

GENERATING SET● Complete system designed and built at ISO9001

certified facility● Factory tested to design specifications at full load

conditions● Fully engineered with a range of options

and accessories

ENGINE● Industrial water cooled diesel engine● Governor, mechanical● Electrical system, 12 VDC● Cartridge type fuel and oil filters● Air filter● Battery(s), rack and cables

ALTERNATOR● Self excited brushless generator● Insulation system, class H● Drip proof alternator air intake (IP23)● Electrical design in accordance with BS5000 Part 99,

IEC60034-1, VDE0530, UTE51100

CONTROL SYSTEM● LCP2 control panel● Vibration isolated sheet steel enclosure with hinged

lockable door

MOUNTING ARRANGEMENT● Heavy-duty fabricated steel base with lifting points● Anti-vibration pads to ensure vibration isolation● Engine coupled to alternator with flexible

disc coupling● Baseframe incorporates metal fuel tank, 8 hours

running capacity

EXHAUST SYSTEM● Heavy duty industrial capacity exhaust silencer

(approximately 25 dB reduction) supplied loose

COOLING SYSTEM● Standard ambient temperatures up to 50° C (122° F)● Fan, fan drive and charging alternator fully guarded● Antifreeze protection coolant

CIRCUIT BREAKER● 3-pole miniature circuit breaker (mcb) < 100 amps ● Vibration isolated sheet steel enclosure with

removable cover plate● Outgoing cable stub-up area directly below circuit

breaker

AUTOMATIC VOLTAGE REGULATOR● Voltage regulation ±0.5 % ● Provides fast recovery from transient load changes

EQUIPMENT FINISH● All electroplated hardware● Anticorrosive paint protection● High gloss polyurethane paint for durability and

scuff resistance

QUALITY STANDARDS● BS4999, BS5000, BS5514, IEC60034, VDE0530

DOCUMENTATION● Operation and maintenance manuals provided● Wiring diagrams included

WARRANTY● All equipment carries full manufacturer's warranty.

Extended warranty terms available.

D I E S E LG E N E R A T I N G S E T

5 0 H z S T A N D B Y 1 3 . 8 k V A / 1 1 . 0 k WP R I M E 1 2 . 5 k V A / 1 0 . 0 k W

6 0 H z S T A N D B Y 1 6 . 2 k V A / 1 3 . 0 k WP R I M E 1 5 . 0 k V A / 1 2 . 0 k W

Exclusively from your Caterpillar® dealer

OPTIONAL EQUIPMENT*

*Some options may not be available on all models.Not all options are listed.

Cooling System Coolant heater50% Anti-Freeze (Protection to -36°C)

Fuel System Low fuel level alarmSilencer System — Open Unit Engine mounted level 2 silencer

Overhead mounting kitEnclosures Sound attenuated enclosure

Perspex control panel viewing in lockable access doorHandling/Trailers Single point lift

Fixed height drawbar 2 wheel trailerAdjustable height drawbar 2 wheel trailer

Controls LCP0 Series panelLCP1 Series panelAccess 2000 panelAccess 4000 panelLube oil pressure gaugeCoolant temperature gaugeBattery charger

Circuit Breaker Upgrades from 3-pole to 4-pole breaker32A CEE Form socket 50 Hz only63A CEE Form socket 50 Hz onlyEarth Leakage protection for main output 300 mA, CB trip

Certification European CE certification

5 0 H z S T A N D B Y 1 3 . 8 k V A / 1 1 . 0 k WP R I M E 1 2 . 5 k V A / 1 0 . 0 k W

6 0 H z S T A N D B Y 1 6 . 2 k V A / 1 3 . 0 k WP R I M E 1 5 . 0 k V A / 1 2 . 0 k W

Exclusively from your Caterpillar® dealer

ALTERNATOR

Make. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OlympianModel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LL1014HType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self-excited, brushlessVoltage regulation . . . . . . . . . . . . . . . ±0.5% at steady state from

from no load to full loadFrequency. . . . . . . . . . . . . . . . . . . . . ±0.8% for constant load from

no load to full loadWaveform distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . THD <4%Radio interference . . . . . . . . . . . . . . Compliance with BS800 and

VDE Class G&NTelephone Interference . . . . . . . . . . . . . . . . . . . . TIF <50, THF <2%Overspeed limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2250 rpmInsulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class HTemperature rise . . . . . . . . . . . . . . . . . . . . . . Within Class H limitsDeration . . . . . . . . . . . . . . . Consult factory for available outputs

ENGINE

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PerkinsModel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403C-15GType. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-CycleAspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Naturally aspiratedCylinder configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . In-line 3Displacement — L (cu in) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 (91.3)Bore/stroke — mm (in) . . . . . . . . . . . . . . . . . . . . . . . 84/90 (3.3/3.5)Compression ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.5:1Engine speed — rpm

50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150060 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800

Piston speed — m/sec (ft/sec)50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 (14.7)60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 (17.7)

Maximum power at rated rpm — kW (hp)Standby

50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 (18.1)60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.2 (21.7)

Prime50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 (16.4)60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7 (19.7)

BMEP — kPa (psi)Standby

50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBA60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBA

Prime50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 (94.2)60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 (94.2)

Regenerative power — kW (hp)50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T B A60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T B A

Motor starting capability — kW (hp)50 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T B A60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T B A

GovernorType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MechanicalClass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISO 8528 G2

SPECIFICATIONS

Consult your Olympian representative for more information

GENERATING SET DIMENSIONS AND WEIGHTS

Length Width Height Weight*Model mm (in) mm (in) mm (in) kg (lb)

GEP13.5-2 1320 (52.0) 552 (21.7) 1258 (49.5) TBA

*Includes oil and coolant

Note: General configuration not to beused for installation. See generaldimension drawings for detail.

50 Hz 60 Hz

Alternator Technical Data 415/240V 400/230V 380/220V 220/127V

Motor Starting Capability:Self Excited (kVA) 25 24 22 24

Full Load EfficiencyStandby % 82.3 82.5 82.4 83.7Prime %

Reactances (per unit) Xd 1.97 2.12 2.35 2.47Saturated X'd 0.15 0.16 0.17 0.18Reactances X"d 0.073 0.078 0.087 0.091are shown Xq 0.99 1.06 1.18 1.24applicable to the X"q 0.107 0.109 0.120 0.127standby rating X2 0.087 0.094 0.104 0.109

X0 0.005 0.005 0.006 0.006

Time Constants:t'd t" t'do ta

25 ms. 2.5ms. 337ms. 4ms.

5 0 H z S T A N D B Y 1 3 . 8 k V A / 1 1 . 0 k WP R I M E 1 2 . 5 k V A / 1 0 . 0 k W

6 0 H z S T A N D B Y 1 6 . 2 k V A / 1 3 . 0 k WP R I M E 1 5 . 0 k V A / 1 2 . 0 k W

Exclusively from your Caterpillar® dealer

GEP13.5-2 (3-Phase)

Consult your Olympian representative for more information.

**dBA levels are for guidance only**Fuel consumption data at indicated load with diesel fuel with a specific gravity of 0.85 and conforming to BS2869:1998 Class A2.

50 Hz 60 HzGenerating Set Technical Data Standby Prime Standby Prime

Package PerformancePower rating kVA (kW) 13.8 (11.0) 12.5 (10.0) 16.2 (13.0) 15.0 (12.0)

Lubricating SystemType: OilOil filter: Spin-on, full flowOil cooler: CoolantOil type required: API CH-4/ACEA E5Total lube system capacity L (U.S. Gal) 6.0 (1.6) 6.0 (1.6)Oil pan capacity L (U.S. Gal) 4.5 (1.2) 4.5 (1.2)

Fuel SystemFuel Tank Capacity L (U.S. Gal) 45 (11.9) 45 (11.9)Generating set fuel consumption**

100% load L/hr (U.S. g/hr) 4.1 (1.1) 3.7 (1.0) 4.7 (1.2) 4.3 (1.1)75% load L/hr (U.S. g/hr) 3.0 (0.8) 2.8 (0.7) 3.5 (0.9) 3.2 (0.9)50% load L/hr (U.S. g/hr) 2.2 (0.6) 2.1 (0.6) 2.5 (0.7) 2.4 (0.6)

Engine Electrical SystemVoltage/ground: 12 vDC/negativeBattery charging alternator ampere rating amps 55 55

Cooling SystemWater pump type: CentrifugalCooling system capacity L (U.S. Gal) 5.96 (1.57) 5.96 (1.57)Maximum coolant static head m H2O (ft H2O) TBA TBACoolant flow rate L/hr (U.S. gal/hr) TBA TBAMinimum temperature to engine °C (°F) TBA TBATemperature rise across engine °C (°F) TBA TBAHeat rejected to coolant at rated power kW (Btu/min) 12.9 (734) 11.6 (660) 15.2 (8.65) 13.6 (774)Total heat radiated to room at rated power kW (Btu/min) 5.9 (336) 5.6 (319) 7.6 (432) 7.3 (415)Radiator fan load kW (hp) 0.17 (0.22) 0.30 (0.40)

Air RequirementsCombustion air flow m3/min (cfm) 1.08 (38.1) 1.08 (38.1) 1.23 (43.4) 1.23 (43.4)Maximum air cleaner restriction kPa (in H2O) TBA TBARadiator cooling air m3/min (cfm) 24.6 (869) 33.0 (1165)Generator cooling air m3/min (cfm) TBA TBA

Exhaust SystemMaximum allowable backpressure kPa (in Hg) 10.2 (3.0) 10.2 (3.0)Exhaust flow at rated power m3/min (cfm) 2.88 (102) TBA 3.36 (119) TBAExhaust temperature at rated power

(dry exhaust) °C (°F) 490 (914) TBA 505 (941) TBAGenerating Set Noise Rating*(without attenuation) at 1 m (3.28 ft) dBA TBA TBA

5 0 H z S T A N D B Y 1 3 . 8 k V A / 1 1 . 0 k WP R I M E 1 2 . 5 k V A / 1 0 . 0 k W

6 0 H z S T A N D B Y 1 6 . 2 k V A / 1 3 . 0 k WP R I M E 1 5 . 0 k V A / 1 2 . 0 k W

Exclusively from your Caterpillar® dealer

50 Hz

VoltageStandby Prime

Code Voltage kVA kW kVA kW

VOPT502 415/240 13.8 11.0 12.5 10.0

VOPT503 400/230 13.8 11.0 12.5 10.0

VOPT504 380/220 13.8 11.0 12.5 10.0

RATINGS AT AVAILABLE VOLTAGES

60 Hz

VoltageStandby Prime

Code Voltage kVA kW kVA kW

VOPT608 220/127 16.2 13.0 15.0 12.0

Ratings at 27° C (80° F), 152.4 m (500 ft), 60% humidity, 0.8 pf

STANDBY

These ratings are applicable for supplyingcontinuous electrical power (at variable load) inthe event of a utility power failure. No overloadis permitted on these ratings. When used atstandby rating the alternator will be peakcontinuous rated (as defined in ISO8528-3).

PRIME POWER

These ratings are applicable for supplyingcontinuous power (at variable load) in lieu ofcommercially purchased power. There is nolimitation to the annual hours of operation andthis model can supply 10% overload power for1 hour in 12 hours.

RATING DEFINITIONS

5 0 H z S T A N D B Y 1 3 . 8 k V A / 1 1 . 0 k WP R I M E 1 2 . 5 k V A / 1 0 . 0 k W

6 0 H z S T A N D B Y 1 6 . 2 k V A / 1 3 . 0 k WP R I M E 1 5 . 0 k V A / 1 2 . 0 k W

Exclusively from your Caterpillar® dealer

www.CAT-ElectricPower.com

278-397 © 2003 CaterpillarAll rights reserved.

European sourced Printed in U.S.A.

LEHF3042-00 (04/03) Materials and specifications are subject to change without notice.The International System of Units (SI) is used in this publication.