Upload
doanbao
View
222
Download
1
Embed Size (px)
Citation preview
ELECTRONIC CIRCUIT BREAKERS
6034
8386
0
888-
0832
/000
0-03
61
07/
2017
- Pr
inte
d in
the
Unite
d St
ates
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.”Copyright – WAGO Kontakttechnik GmbH & Co. KG – all rights reserved. The content and structure of the WAGO Websites, catalogs, videos, and other WAGO media are subject to copyright. The dissemination or changing of the content of these pages and videos is not permitted. Furthermore, the content may neither be copied nor made available to third parties for commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties.”
Part Number 787-2861/0100-0000
787-2861/0200-0000
787-2861/0400-0000
787-2861/0600-0000
787-2861/0800-0000
787-2861/0108-0000
Nominal Voltage 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC
Adjustable Nominal Current 1 A 2 A 4 A 6 A 8 A 1 ... 8 A
Temperature Range -25 ⁰C ... +70 ⁰C -25 ⁰C ... +70 ⁰C -25 ⁰C ... +70 ⁰C -25 ⁰C ... +70 ⁰C -25 ⁰C ... +60 ⁰C -25 ⁰C ... +60 ⁰C
EPSITRON® Single-Channel ECBs
ECBs vs. Thermal Magnetic Circuit Breakers• More reliable trip curve• Local and remote set/reset
capabilities• Space savings: 6 mm vs. 12.5 mm• Reduce wiring time by jumpering• Solid state device will never wear out
Marking Options• Via WMB Markers or TOPJOB®S
Marking Strips• Devices are color-coded
according to nominal current
Industry’s Most Compact• “True” 6.0 mm width maximizes
panel space
Trip
ping
Tim
e
Rated Current
1.5
0.6
1.2
1.5
2.0
2.5
3.03.5 7.5
1.13
Min
utes
Seco
nds
1.45
0.4
0.1
0.06
0.04
0.02
0.01
0.006
0.004
0.002
0.001
Trip Characteristics• Reliable, rapid and precise
switching in case of overcurrent or short circuit
• High switch-on capacities >50,000 µF prevents false tripping
Intuitive Status Indication• Integrated, multi-color LEDs
indicate the operating status of each channel
• Push/slide switch for switching on/off, as well as set/reset
Push-in CAGE CLAMP® Connection• Terminate solid and ferruled
conductors via Push-in CAGE CLAMP® Connections - no operating tool needed
Easy Jumpering• Signal output can be jumpered
for up to 30 devices• Jumpering signal level allows
reset of circuit breaker channels
WHY WAGO?