Upload
phamdieu
View
292
Download
14
Embed Size (px)
Citation preview
LG CHEM
EP 충격보강제충격보강제충격보강제충격보강제 소개소개소개소개
Tech center . Rubber/specialty polymer division. LG chem
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.
Acrylic Impact Modifiers
MBS
Processing Aids
EP Modifiers
IM808AIM808AIM808A
S20S20S20
MB838AMB838AMB838A
PA910PA910PA910
PA828PA828PA828
PA930PA930PA930
EM500AEM500AEM500A
� Excellent Impact Strength & Weatherability
� Dynamic Thermal Stability
� Wide processing window
�1-pack Grade
� Good Balance of Impact & Optical Properties � Excellent Transparency
� Excellent Impact Strength & Efficiency
� Superior low temp. Impact Strength
� General Purpose
� High Molecular Weight
� Better Hot Tensile Strength
� Better Foam Extrudability
� Impact Modifier for Engineering Plastics
(PC, PBT,PC/PBT, PC/ABS, PMMA)
Opaque MBS
MB872MB872MB872
MB885MB885MB885
Transparent MBS
MB802MB802MB802� Anti-crease Whitening
EM600EM600EM600
IM809IM809IM809
IM810IM810IM810
IM812IM812IM812
EM500EM500EM500
제품제품제품제품 분류분류분류분류
EM600AEM600AEM600A
EM505EM505EM505
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●저온충격저온충격저온충격저온충격 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●열안정성열안정성열안정성열안정성 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●내가수분해성내가수분해성내가수분해성내가수분해성●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●EM500A
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●내후성내후성내후성내후성
●●●●●●●●●●●●
●●●●●●●●●●●● Acrylic
EM600
●●●●●●●●투명투명투명투명 PMMA
●●●●●●●●PC/PBT (PET)
●●●●●●●●●●●●●●●●●●●●●●●●
●●●●●●●●PMMA/SAN
Application ●●●●PC ( or GF reinforced) ●●●●PC/ABS ●●●●PBT (or GF reinforced) ●●●●PBT Alloys ●●●●●●●●PMMA
●●●●ABS ●●●●SAN
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●상온충격상온충격상온충격상온충격 ButadieneRubber 물질물질물질물질 EM600AEM505EM500Property
EP 충격보강제충격보강제충격보강제충격보강제 구분구분구분구분
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.
CoreCore
ShellShell100~350 nm
-높은높은높은높은 Tg
-기재와의기재와의기재와의기재와의분산성을분산성을분산성을분산성을높여높여높여높여
주는주는주는주는역할역할역할역할
-가교가교가교가교고무고무고무고무
-외부외부외부외부충격충격충격충격에너지에너지에너지에너지흡수함흡수함흡수함흡수함
- Butadiene 고무고무고무고무
: Tg -80℃℃℃℃ , 내후성내후성내후성내후성취약취약취약취약
-아크릴아크릴아크릴아크릴고무고무고무고무
: Tg (-45℃℃℃℃), 내후성내후성내후성내후성우수우수우수우수
� Core-Shell structure
충격보강제충격보강제충격보강제충격보강제 구조구조구조구조
� MBS 분말
� Core-Shell 구조
-수십억개의수십억개의수십억개의수십억개의 Nano크기크기크기크기입자가입자가입자가입자가뭉쳐서뭉쳐서뭉쳐서뭉쳐서형성형성형성형성
250㎛㎛㎛㎛
� 분산
-가공가공가공가공시시시시분말이분말이분말이분말이기재에기재에기재에기재에 Nano크기로크기로크기로크기로분산됨분산됨분산됨분산됨
-분산성은분산성은분산성은분산성은충격충격충격충격효율효율효율효율및및및및표면표면표면표면물성을물성을물성을물성을결정결정결정결정
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.Rubber 함량함량함량함량
EM500AEM500A
EM505EM505
EM500EM500
고함량고함량고함량고함량
Rubber 크기
크기
크기
크기
大大 大大
물성물성물성물성물성물성물성물성 비교비교비교비교비교비교비교비교Rubber Rubber 크기크기크기크기크기크기크기크기 & & 함량함량함량함량함량함량함량함량
LG’s Butadiene rubber modifiers
012345저온 충격강도저온 충격강도저온 충격강도저온 충격강도 PC blend 충격강도PC blend 충격강도PC blend 충격강도PC blend 충격강도
내가수분해성내가수분해성내가수분해성내가수분해성열안정성열안정성열안정성열안정성표면 광택표면 광택표면 광택표면 광택흐름성흐름성흐름성흐름성분산성분산성분산성분산성
EM500EM500EM500EM500EM500AEM500AEM500AEM500AEM505EM505EM505EM505
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.
1. EM600(A) : EP용용용용충격보강제충격보강제충격보강제충격보강제
1) 특징특징특징특징 : PMMA용용용용투명용투명용투명용투명용충격보강제충격보강제충격보강제충격보강제
우수한우수한우수한우수한충격강도충격강도충격강도충격강도및및및및내후성내후성내후성내후성
내내내내화학화학화학화학안정성안정성안정성안정성및및및및색상색상색상색상안정성안정성안정성안정성
2) 적용적용적용적용분야분야분야분야: PMMA
2. EM600(A) Design
구조구조구조구조: Core-Shell type
1) Core : rubber (BA/SM rubber : 충격충격충격충격흡수흡수흡수흡수)
2) Shell : 혼련성혼련성혼련성혼련성 (MMA : 기재와기재와기재와기재와혼련성혼련성혼련성혼련성우수우수우수우수)
1.486
(PMMA : 1.489)굴절율굴절율굴절율굴절율
MMAShell
BA/SMRubber
EM600(A)
구조구조구조구조구조구조구조구조
CoreCore
ShellShell0.3~0.35㎛㎛㎛㎛
-기재와의기재와의기재와의기재와의혼련성혼련성혼련성혼련성기능기능기능기능
-충격흡수충격흡수충격흡수충격흡수
EM600(A) : 아크릴아크릴아크릴아크릴modifier
The information contained herein is intended for the named recipients only. It may contain privileged and confidential information or otherwise protected under applicable laws. If you have received this document in error, please immediately notify the sender and shred the documents and any attachments without any copying or disclosure of the contents. LG Chem, Ltd.
물성물성물성물성물성물성물성물성 비교비교비교비교비교비교비교비교
LG’s PMMA modifiers
0
1
2
3
4
5
Impact strengthImpact strengthImpact strengthImpact strength
ColorColorColorColor
heat stabilityheat stabilityheat stabilityheat stability
TransparencyTransparencyTransparencyTransparency
EM600EM600EM600EM600
EM600AEM600AEM600AEM600A