ENVIRONMENTAL PRODUCT DECLARATION IGP ......EPD-IGP-20190147-IBC1-EN Declared product / declared unit Weatherproof powder coating IGP-HWFclassic 5903 S-type, declared unit 1 kg This

Umwelt Produktdeklaration Name des Herstellers – Name des Produkts

ENVIRONMENTAL PRODUCT DECLARATIONas per ISO 14025 and EN 15804+A1

Owner of the Declaration IGP Pulvertechnik AG

Programme holder Institut Bauen und Umwelt e.V. (IBU)

Publisher Institut Bauen und Umwelt e.V. (IBU)

Declaration number EPD-IGP-20190147-IBC1-EN

Issue date 16.01.2020

Valid to 15.01.2025

IGP HWFclassic 5903 S-typeIGP Pulvertechnik AG

www.ibu-epd.com | https://epd-online.com

2 Environmental Product Declaration IGP Pulvertechnik AG – EN: IGP-HWFclassic 5903 S-Typ

1. General Information

IGP Pulvertechnik AG IGP HWFclassic 5903 S-TypProgramme holderIBU – Institut Bauen und Umwelt e.V.Panoramastr. 110178 BerlinGermany

Owner of the declarationIGP Pulvertechnik AGRingstrasse 309500 WilSwitzerland

Declaration numberEPD-IGP-20190147-IBC1-EN

Declared product / declared unitWeatherproof powder coating IGP-HWFclassic 5903 S-type, declared unit 1 kg

This declaration is based on the product category rules:Coatings with organic binders, 09.2017 (PCR checked and approved by the SVR)

Issue date16.01.2020

Valid to15.01.2025

Scope:This Environmental Product Declaration involves a representative formula of an organic, duroplastic powder coating manufactured by IGP Pulvertechnik AG. The Declaration comprises the depictable weatherproof colour range of the plain and pearl-mica effect colour shades of the highly weather-resistant product IGP-HWFclassic 5903 S-type. The declared products refer to the development and production facility in Wil, Switzerland.

The owner of the declaration shall be liable for the underlying information and evidence; the IBU shall not be liable with respect to manufacturer information, life cycle assessment data and evidences.The EPD was created according to the specifications of EN 15804+A1. In the following, the standard will be simplified as EN 15804.

Verification

The standard EN 15804 serves as the core PCRIndependent verification of the declaration and data

according to ISO 14025:2010Dipl. Ing. Hans Peters(chairman of Institut Bauen und Umwelt e.V.) internally x externally

Dr. Alexander Röder(Managing Director Institut Bauen und Umwelt e.V.))

Christina Bocher(Independent verifier appointed by SVR)

2. Product

2.1 Product description/Product definitionIGP-HWFclassic 5903 S-type is a highly weather-resistant matt powder-coating system with increased scratch resistance on the basis of saturated polyester resins, the corresponding hardener and special heat- and light-resistant pigments.

This Environmental Product Declaration involves a representative formula of an organic, duroplastic powder coating manufactured by IGP Pulvertechnik AG. Use of the product is subject to the respective national specifications at the place of use; in Germany, for example, the state building codes and the technical specifications based on these guidelines.

2.2 ApplicationIGP-HWFclassic 5903 S-type is used for powder-coating facade elements and window profiles, primarily made of aluminium. On account of its very long-term gloss and colour retention under the impacts of weathering, the application focuses on high-quality buildings or infrastructural construction projects.

2.3 Technical DataThe IGP-HWFclassic 5903 S-type powder-coating films applied with the recommended coating thickness of approx. 60 µm are specially developed for architectural applications with increased requirements on weather stability as well as scratch and abrasion resistance (S-type) and display the following powder and film properties:


Construction data Name Value UnitDensity /ISO 8130-2/ 1.3 - 1.6 kg/m3

Solids content /ISO 14680-2/ 100 %

Gloss in GU (Gloss Units) /DIN EN ISO 2813/ 17 - 25 %

Salt spray resistance (AASS) /ISO 9227/

750 h dmax ≤1 -

Sulphur dioxide and moisture condensation test /ISO 6988/

no blisters dmax ≤1 -

Accelerated weathering WOM /ISO 16474-2/

1000 h / 90 % -

Accelerated weathering QUV-B /ISO 16474-3/

600 h / 50%

Outdoor weathering Florida exposure gloss and colour tolerances acc. to /GSB International/, /Qualicoat/ ISO 2810/

3 years 50% RG -

Change in colour and gloss acc. to /GSB/ and /Qualicoat/, /CIELAB/ colour space

QC class 2/

GSB Master

Curing time in min from 20 hCuring temperature 170 °CTheoretical spreading rate in accordance to the layer thickness (μm)

8 m2/kg

Hardness test /ISO 1520/> 5 mm, with tape

testmm

Mandrel bending test /ISO 1519/ ≤ 5 mm -Indentation hardness /ISO 2815/ ≥ 80 -Scratch resistance in line with Martindale acc. to /ISO 129472-2/ and /DIN CEN 16611/ 32 cycles /500 Gr (residual gloss)

60% RG

Product performance values in terms of its characteristics following the relevant technical determination (no CE marking).

2.4 Delivery statusIGP-HWFclassic 5903 S-type is supplied as a ground powder. The powder coating is packed in cardboard boxes lined with antistatic polyethylene (PE) sacks (volume 20 kg) or in cardboard containers containing 25 antistatic PE sacks à 20 kg (total volume 500 kg).

2.5 Base materials/Ancillary materials The Declaration refers to the following composition of IGP-HWFclassic 5903 S-type powder coating:

Binding agents (resin and hardener) 60–75% Pigments (coloured/effect pigments) 0– 5% Titanium dioxide 0–25.5% Extender 5–20% Additives 3–3.6%

All formula ingredients are pre-registered in accordance with Directive (EC) No. 1907/2006 (/REACH/) and correspond with their designated use. Substances of very high concern (SVHC), last revised 15.01.2019, are not used.

The formula also meets the requirements of EC Directive 2011/65/EU (/RoHS 2011/65/EU/).

The product / At least one partial product contains other CMR substances in categories 1A or 1B which are not on the candidate list, exceeding 0.1 percentage by mass in at least one partial product: no

Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): no

2.6 ManufacturePowder coatings are produced in a certain order: weighing the individual components, mixing (pre-mixing), extruding (plasticisation and homogenisation), grinding, sieving and filling. The production levels are generally two- or three-stage.

Weighing is followed by the mixing process which homogenises the mixture. Then the substance mixture of raw materials is ready for extrusion – a process which uses shearing forces to achieve intensive homogenisation (dispersion) of the raw materials. After extrusion, the smelt (extrudate) leaks out, is cooled and rolled out. Then the solidified mass is crushed into chips by a shredder which are then ground to their final powder processing form and then packed.

2.7 Environment and health during manufacturing

Certification of the environmental management system in accordance with /ISO 14001/ of IGP Pulvertechnik AG guarantees environmentally-friendly manufacturing and prudent handling of all resources, e.g. the closed cooling circuit of the production plants, thermal recovery from waste production heat and air, as well as giving preference to suppliers which are near the production facility.

As the production process is largely automated, contact by employees with the raw materials and preliminary products used is minimised. The requisite personal protective equipment is also made available.

2.8 Product processing/InstallationIGP-HWFclassic 5903 S-type must be exclusively processed using “Korona” electrostatic plants typically available on the market.

Guidelines to be considered: VDE specifications in accordance with /VDE 0745/ and /VDMA standard sheet 24371-1/.

Powder coatings do not require any solvents for dispersion nor do they discharge any volatile components after forming a film. The overspray can be extracted and reused using the corresponding equipment.

2.9 PackagingThe powder coatings are packed in PE foil and cardboard and transported on wooden pallets. Packaging materials are recyclable and should be directed to a recycling system. The wooden pallets can be reused.


2.10 Condition of useThe powder starting material is crosslinked via the link between the polymer chains during the curing process (“hardening”) to form a smooth duro-plastic film. The ensuing surface is insoluble in water and irreversibly hardened.

No solid or gaseous components come to the surface during use (no blooming, no outgassing). At most, volatile substances in the form of short invisible residual molecules can escape but are below the detection limit.

The protection duration and useful life are dependent on the facade lifetime. Any changes in colour and gloss comply with the tolerance band of the relevant quality associations and are certified by the following material approvals:

/Qualicoat/, "Class 2" /GSB INternational/, "Class Master" /AAMA 2604/ test report

2.11 Environment and health during useWhen IGP-HWFclassic 5903 S-type is processed as designated and taking consideration of the applicable safety information, no impacts to health or harmful environmental influences can be anticipated.

2.12 Reference service lifeWhen surfaces coated with IGP-HWFclassic 5903 S-type are cared for appropriately, the service life corresponds with the useful life of the building. Weather-induced changes in colour and gloss do not impair the product’s protective effect.

Material aging occurs primarily through the effect of UV radiation and the influences of moisture. Both influences can lead to changes in colour and gloss which are within the tolerance framework of the GSB and Qualicoat quality associations but paint delamination should not occur. High concentrations of highly-reactive atmospheric gases such as industrial gases or chlorides – e.g. caused by de-icing salt – can lead to irreversible impacts in the protective effect of the paint film through to infiltration and delamination.

2.13 Extraordinary effects

FirePowder-coated construction products are classified as “non-homogeneous building products”. By definition, powder coatings which are regarded as decorative coatings for metallic surfaces are non-substantial components of a construction and are therefore not building products; they can however be tested like a building product in accordance with /EN 13501-1/.

IGP-HWFclassic 5903 S-type is classified and was tested by the Materialprüfanstalt MPA Braunschweig in compliance with the reaction-to-fire process as per /EN 13501-1/. On the basis of the tests outlined above, the following general technical approvals were awarded by the Deutsches Institut für Bautechnik DIBt with the approval number /No. Z-56.428-1023/ dated 11 December 2018 for the IGP powder-coated systems

referred to above on one or both sides of coated metal surfaces or metal profiles with all-round coatings.

The powder-coating system referred to above is classified as a non-ignitable building material in accordance with /EN 13501-1/: class A1 or class A2-s1, d0, depending on the product range and coating thickness. Evidence of approval is provided on the respective product technical data sheet. Building material className ValueBuilding material class A1-A2 1 - 2Burning droplets d0Smoke gas development S1 WaterFully-crosslinked films of IGP-HWFclassic 5903 S-type are not attacked by water. There is no hazard for water through contact with powder-coated surfaces, e.g. in the event of flooding.

Mechanical destructionIGP-HWFclassic 5903 S-type powder-coated films display a significantly increased degree of scratch resistance to multilinear scratches and increased resistance to abrasive stress. Mechanical flexibility is displayed in accordance with /GSB/ and /Qualicoat/ requirements.

2.14 Re-use phaseIGP HWFclassic 5903 S-type coatings can be removed chemically or thermally from the substrate within the framework of metal recovery and then disposed of thermally. Paint sludge arising during chemical removal is also suitable for incineration.

2.15 DisposalWaste code in accordance with the European waste directory for powder coatings: /EWC/, some waste derived from coating powder, residual powder and filter waste fine powder (which has not been applied) is used for the manufacture of composite materials.

Incineration within the framework of energy recovery for cement plants has also been established.

2.16 Further informationFor more information on the product:

Website: http://www.igp.chTechnical data sheet: IGP-HWFclassic 5903 S-typeTechnical information: Ti 106, Ti 107, Ti 108, Ti 109

Safety data sheets on specific items are available online.


3. LCA: Calculation rules

3.1 Declared UnitThe declared unit is 1 kg.

On average, 0.102 kg powder coating is used for application to a metal surface.

The volume depends on the part geometry, covering capacity, powder cloud, speed etc.

This Environmental Product Declaration declares a representative formula. The formula on which the composition is based has been selected so as to represent the maximum environmental impacts for IGP-HWF classic 5903 S-type coating powder.

Details on declared unitName Value UnitGross density (mean value) 1450 kg/m3

Declared unit 1 Kg

3.2 System boundaryType of EPD: Cradle to Grave – with options.

The product stage of the powder coating and disposal thereof is calculated in terms of its LCA in this Declaration.This LCA comprises the provision of raw materials (Module A1), transport to the production facility (Module A2) and the powder coating manufacturing processes, including packaging (Module A3). At the end of life, the product is transported to the disposal plant (C2) where it is disposed of (C4).

Application of the powder coating is outside the system boundary of this EPD.

3.3 Estimates and assumptionsData sets on the upstream chains associated with manufacturing basic materials are taken from the /GaBi data base/. Materials for which there are no inventories available are approximated with data sets of similar chemicals or estimated by merging available data sets.

3.4 Cut-off criteriaAll data from the operating data survey was taken into consideration, i.e. all starting materials used according to the formula. Expenditure associated with transport is included in the calculations for all materials.

The LCA calculation considers the production waste incurred directly during production, the requisite electrical and thermal energy, and the packaging materials.

Accordingly, all material and energy flows are largely considered with a share of less than one per cent; exceptions: Big Bags (packaging material) and sludge during the manufacturing process each account for a share of <1%. Sludge is incurred while cleaning the containers.

3.5 Background data/GaBi 9/ – the software system for comprehensive analysis developed by thinkstep AG – was used for modelling the life cycle of the product under review.

3.6 Data qualityThe data quality can be regarded as good. The primary data was collated in full taking consideration of all relevant flows.The background data was taken from the /GaBi 2019/ data bases. The data bases were last updated in 2019.

3.7 Period under reviewThe primary data is representative of the period under review in 2018.

3.8 AllocationPrimary dataThe production process does not produce any by-products. Accordingly, no allocation is integrated in the Life Cycle Assessment. Total production comprises other products as well as the product declared here. In collating data, the individual values for thermal and electric energy as well as for auxiliary materials and packaging were related to the products to be declared and taking consideration of the declared unit in kg. The volumes of raw materials for each individual product in the goods group were measured continuously. Credits from thermal utilisation of the production waste were allocated for the product stage. Credited thermal energy is offset within the product stage.

Background dataInformation on the individual data sets is documented at http://www.gabi-software.com/international/support/gabi/.

3.9 ComparabilityBasically, a comparison or an evaluation of EPD data is only possible if all the data sets to be compared were created according to EN 15804 and the building context, respectively the product-specific characteristics of performance, are taken into account.

The used background database has to be mentioned. /GaBi 9/ software was used to calculate the LCA.

http://www.gabi-software.com/international/support/gabi/

http://www.gabi-software.com/international/support/gabi/


4. LCA: Scenarios and additional technical information

The following information is used for calculating the declared modules: Construction installation process (A5)Name Value UnitOther resources (biogenic CO� emissions from the use of wood and cardboard as packaging)

0.107 kg

Other energy carriers (renewable primary energy for material use, PERM [from packaging])

0.956 MJ

Other energy carriers (non-renewable primary energy for material use, PENRM [from packaging])

0,160 MJ

Module A5 is not declared. Only the values for calculating CO2 neutrality and renewable primary energy for material use are indicated here (in accordance with the requirements indicated in /IBU PCR, Part A/).These values are derived from the use of product packaging (volume: 0.004 kg PE film, 0.051 kg wooden pallet, 0.034 kg cardboard).

End of Life (C1-C4)Name Value UnitFor thermal utilisation without energy recovery 1 kg

An average distance of 200 km is assumed as a transport distance in C2. As a disposal scenario, it is assumed that the powder coating on an aluminium surface during disposal is disposed of thermally when recycling the aluminium (melting/incinerating). No credits were allocated for incineration for energy substitution but rather the emissions incurred were considered.


5. LCA: Results

DESCRIPTION OF THE SYSTEM BOUNDARY (X = INCLUDED IN LCA; MND = MODULE NOT DECLARED; MNR = MODULE NOT RELEVANT)

PRODUCT STAGECONSTRUCTION PROCESS

STAGEUSE STAGE END OF LIFE STAGE

BENEFITS AND LOADS

BEYOND THE SYSTEM

BOUNDARIES

Raw

mat

eria

l su

pply

Tran

spor

t

Man

ufac

turin

g

Tran

spor

t fro

m th

e ga

te to

the

site

Ass

embl

y

Use

Mai

nten

ance

Rep

air

Rep

lace

men

t

Ref

urbi

shm

ent

Ope

ratio

nal e

nerg

y us

e

Ope

ratio

nal w

ater

us

e

De-

cons

truct

ion

dem

oliti

on

Tran

spor

t

Was

te p

roce

ssin

g

Dis

posa

l

Reu

se-

Rec

over

y-R

ecyc

ling-

pote

ntia

l

A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D

X X X MND MND MND MND MNR MNR MNR MND MND MND X MND X MND

RESULTS OF THE LCA - ENVIRONMENTAL IMPACT according to EN 15804+A1: 1 kg IGP HWF classic 5903

Parameter Unit A1-A3 C2 C4

Global warming potential [kg CO2-Eq.] 3.73E+0 1.63E-2 2.53E+0Depletion potential of the stratospheric ozone layer [kg CFC11-Eq.] 2.75E-14 2.69E-18 1.75E-15

Acidification potential of land and water [kg SO2-Eq.] 4.13E-2 4.13E-5 6.52E-4Eutrophication potential [kg (PO4)3--Eq.] 8.99E-4 1.03E-5 6.34E-5

Formation potential of tropospheric ozone photochemical oxidants [kg ethene-Eq.] 2.04E-3 -1.43E-5 2.67E-5

Abiotic depletion potential for non-fossil resources [kg Sb-Eq.] 1.27E-5 1.25E-9 3.74E-7Abiotic depletion potential for fossil resources [MJ] 7.59E+1 2.21E-1 1.06E+0

RESULTS OF THE LCA - RESOURCE USE according to EN 15804+A1: 1 kg IGP HWF classic 5903Parameter Unit A1-A3 C2 C4

Renewable primary energy as energy carrier [MJ] 7.12E+0 1.28E-2 2.95E-1Renewable primary energy resources as material utilization [MJ] 1.12E+0 0.00E+0 0.00E+0

Total use of renewable primary energy resources [MJ] 8.24E+0 1.28E-2 2.95E-1Non-renewable primary energy as energy carrier [MJ] 5.57E+1 2.21E-1 1.18E+0

Non-renewable primary energy as material utilization [MJ] 2.24E+1 0.00E+0 0.00E+0Total use of non-renewable primary energy resources [MJ] 7.81E+1 2.21E-1 1.18E+0

Use of secondary material [kg] 0.00E+0 0.00E+0 0.00E+0Use of renewable secondary fuels [MJ] 0.00E+0 0.00E+0 0.00E+0

Use of non-renewable secondary fuels [MJ] 0.00E+0 0.00E+0 0.00E+0Use of net fresh water [m³] 2.79E-2 2.17E-5 6.21E-3

RESULTS OF THE LCA – OUTPUT FLOWS AND WASTE CATEGORIES according to EN 15804+A1: 1 kg IGP HWF classic 5903

Parameter Unit A1-A3 C2 C4

Hazardous waste disposed [kg] 7.00E-8 1.24E-8 6.51E-9Non-hazardous waste disposed [kg] 1.49E-1 1.80E-5 2.64E-1

Radioactive waste disposed [kg] 8.70E-4 3.00E-7 5.04E-5Components for re-use [kg] 0.00E+0 0.00E+0 0.00E+0Materials for recycling [kg] 0.00E+0 0.00E+0 0.00E+0

Materials for energy recovery [kg] 0.00E+0 0.00E+0 0.00E+0Exported electrical energy [MJ] 0.00E+0 0.00E+0 0.00E+0Exported thermal energy [MJ] 0.00E+0 0.00E+0 0.00E+0

6. LCA: Interpretation

The loads during the life cycle are primarily caused by the upstream chains associated with the raw materials used in powder coatings. They account for a share of more than 50% in all impact categories. With except of the abiotic depletion potential (elementary) impact category, the binder and titanium dioxide pigment

preliminary products are responsible for more than 80% of the environmental impacts in Module A1 and therefore of relevance. The abiotic depletion potential (elementary) impact category is dominated by the additives.

7. Requisite evidence

IGP-HWFclassic 5903 is used for powder-coating facade elements and window profiles, primarily made of aluminium. Building products powder-coated with IGP-HWFclassic 5903 are primarily used outside the

building. But window profiles also have contact with interiors.There are no statutory regulations concerning evidence of VOC emissions for use in indoor applications.


In-house studies conducted by the manufacturer have indicated that there is no evidence of a hazard to health or the environment in interiors which could be attributable to volatile organic compounds (VOCs), fire gases or leaching.

8. References

/IBU PCR, Part A/Product category rules for building-related products and services, Part A: Calculation rules for the LCA and requirements on the Project Report, Version 1.7, Institut Bauen und Umwelt e.V., 2019 /IBU PCR, Part B: Coatings with organic binding agents/Product category rules for building-related products and services Part B: Requirements on the EPD for coatings with organic binding agents, Berlin: Institut Bauen und Umwelt e.V. (IBU), 2017-11 /GaBi 9/GaBi version 9: Software and database for comprehensive life cycle assessment, 1992-2019 (SP 39); thinkstep AG, Leinfelden-Echterdingen, recognised by LBP University of Stuttgar /GaBi 2019/GaBi database 2019: documentation of GaBi 9 data sets in the database for comprehensive life cycle assessment; LBP, University of Stuttgart and thinkstep AG, Leinfelden-Echterdingen, 2019 (http://www.gabi-software.com/international/databases/gabi-data-search/) /EN 15804/EN 15804:2012-04+A1 2013, Sustainability of construction works – Environmental product declarations – Core rules for the product category of construction products /CIELAB/The CIELAB colour space (also CIE L*a*b*) is a colour space defined by the CIE (Commission Internationale de l'Eclairage, International Commission on Illumination) in 1976. /DIN CEN TS 16611/DIN CEN/TS 16611:2016-08, Furniture – Assessment of the surface resistance to microscratching; Scratch resistance was tested on the basis of ISO 129472-2 and DIN CEN TS 16611. /ISO 1519/DIN EN ISO 1519-2011-04, Paints and varnishes – Bend test (cylindrical mandrel) /ISO 1520/DIN EN ISO 1520-2007-11, Paints and varnishes – Cupping test /ISO 2409/DIN EN ISO 2409-2013-06, Paints and varnishes – Cross-cut test /ISO 2810/DIN EN ISO 2810-2004-10, Paints and varnishes – Natural weathering of coatings – Exposure and assessment

/ISO 2813/DIN EN ISO 2813-2015-02, Paints and varnishes – Determination of gloss value at 20°, 60° and 85 /DIN EN ISO 2815/DIN EN ISO 2815 - 2003-10, Paints and varnishes – Buchholz indentation test /ISO 3231/DIN EN ISO 3231:1998-02, Paints and varnishes – Determination of resistance to humid atmospheres containing sulphur dioxide /ISO 6270-2/ DIN EN ISO 6270-2:2018-04, Paints and varnishes – Determination of resistance to humidity, Part 2: Condensation /ISO 6272-1/DIN EN ISO 6272-1:2011-11, Paints and varnishes – Rapid-deformation (impact resistance) tests, Part 1: Falling-weight test, large-area indenter /ISO 6988/DIN EN ISO 6988:1997-03, Metallic and other non-organic coatings – Sulphur dioxide test with general condensation of moisture /ISO 8130/DIN EN ISO 8130-2, Coating powders, Part 2: Determination of density by gas comparison pyknometer /ISO 9227/DIN EN ISO 9227:2017-07, Corrosion tests in artificial atmospheres – Salt spray tests /ISO 11507/DIN EN ISO 11507-2007-05, Paints and varnishes – Exposure of coatings to- artificial weathering- fluorescent UV radiation and water /EN 12206-1/ DIN EN 12206-1 – 2004-09 Paints and varnishes – Coatings on aluminium and aluminium alloys for architectural purposes, Part 1: Coatings prepared from thermosetting coating powder /ISO 12947-2/ISO 12947-2:2016, Textiles – Determination of the abrasion resistance of fabrics by the Martindale method, Part 2: Determination of specimen breakdownScratch resistance was tested on the basis of ISO 129472-2 and DIN CEN TS 16611. /EN 13501-1/DIN EN 13501-1:2010-01, Classification of construction products and methods by fire


performance, Part 1: Classification with the results of tests on reaction to fire of construction products /ISO 14001/DIN EN ISO 14001:2015-11; Environmental management systems – Requirements with guidance for use /ISO 14680/DIN EN ISO 14680-2:2006-04, Paints and varnishes – Determination of pigment content, Part 2: Ashing method /ISO 16474, Parts 1-3/DIN EN ISO 16474, Parts 1-3:2014, Paints and varnishes – Methods of exposure to laboratory light sourcesDIN EN ISO 16474-1:2014-03, Part 1, General guidanceDIN EN ISO 16474-2:2014-03, Part 2, Xenon-arc lamps (e.g. WOM); radiation, temperature, cyclesDIN EN ISO 16474-3:2014-03, Part 3, Fluorescent UV lamps (e.g. QUV-B): radiation, temperature, cycles /DIN 50018/DIN 50018:2012-05, Testing in a saturated atmosphere in the presence of sulphur dioxide /EWC/European waste code (EWC), No. 080201 – Waste derived from coating powder /GSB International/Quality association for batch coating of components; GSB specifications 11.06.2019: GSB QR AL 631 - 2017 11 06, Quality assurance and specifications of processes, products and quality tests; www.gsb-international.com /No. Z-56.428-1023/ [JH4] General technical approval number of the Deutsches Institut für Bautechnik for the product group under review

/Qualicoat/Quality association for industrial varnishing and coating; Qualicoat specifications 16.07.2019: 16th Master Edition, Quality assurance and specifications of processes, products and quality tests, www.qualicoat.net /REACH/Directive (EC) No. 1907/2006 on the registration, evaluation, authorisation and restriction of chemicals (REACH) /RoHS 2011/65/EU/Guideline 2011/65/EU on the restriction of use of certain hazardous substances in electrical and electronic devices /VDMA standard sheet 24371-1/Machines and plants for surface technology; Guidelines on electrostatic coating with plastic powder /VDE 0745/DIN EN 50050-2:2014-03, VDE 0745-102:2014-03 and VDE 0745-102:2014-03, Electrostatic hand-held spraying equipment – Safety requirements, Part 2: Hand-held spraying equipment for ignitable coating powder; Specifications of the Verband für Elektrotechnik, Elektronik und Informationstechnik e.V.; www.vde.com /AAMA 2604/AAMA 2604-17, Voluntary standards, performance requirements and test procedure for highly weather-resistant organic coatings on profiles and aluminium sheet metal; in accordance with the test design of the American Architectural Manufacturers Association (AAMA)

http://www.vde.com

PublisherInstitut Bauen und Umwelt e.V.Panoramastr. 110178 BerlinGermany

Tel +49 (0)30 3087748- 0Fax +49 (0)30 3087748- 29Mail [email protected] www.ibu-epd.com

Programme holderInstitut Bauen und Umwelt e.V.Panoramastr 110178 BerlinGermany

Tel +49 (0)30 - 3087748- 0Fax +49 (0)30 – 3087748 - 29Mail [email protected] www.ibu-epd.com

Author of the Life Cycle Assessmentthinkstep AGHauptstraße 111- 11370771 Leinfelden-EchterdingenGermany

Tel +49 711 341817-0Fax +49 711 341817-25Mail [email protected] http://www.thinkstep.com

Owner of the DeclarationIGP Pulvertechnik AGRingstrasse 309500 WilSwitzerland

Tel +41 71 929 81 49Fax +41 71 929 81 11Mail [email protected] www.igp-powder.com

mailto:[email protected]

mailto:[email protected]

Documents

ENVIRONMENTAL PRODUCT DECLARATION IGP ......EPD-IGP-20190147-IBC1-EN Declared product / declared unit Weatherproof powder coating IGP-HWFclassic 5903 S-type, declared unit 1 kg This