21
Environmental Management: Spill Containment & Control An Expert Guide Spill Control Absorbents Granules Spill Kits Dispensers Drain Protection Pollution Prevention Bioremediation Storage

Environmental Management: Spill Containment & Control

  • Upload
    phungtu

  • View
    239

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Environmental Management: Spill Containment & Control

Environmental Management: Spill Containment & ControlAn Expert Guide

Spill ControlAbsorbentsGranules

Spill Kits Dispensers Drain Protection

Pollution PreventionBioremediationStorage

Page 2: Environmental Management: Spill Containment & Control

OUR SERVICE 2POLLUTION PREVENTION 3-4 GUIDELINES SPILL CONTROL 5-6Chemical Absorbents 7-8Maintenance Absorbents 9-10 Oil Absorbents 11-12 Spill Response Kits 13-16SPILL CONTROL ACCESSORIES Absorbent Granules 17-18 Specialist Absorbents & Mats 19-20 Spill Dispensing Stations 21 Drain Protection 22POLLUTION PREVENTIONFiltration Systems 23-26SPILL AFTERCAREBioremediation 27-28OIL & CHEMICAL STORAGE & CONTAINMENT Oil Storage Regulations 29-30 Secondary Containment 31-37Steel Drum Storage 38

contents

www.arco.co.uk© Arco Limited. All rights reserved. Terms and conditions apply, available on request or from www.arco.co.uk

Our ServiceAs part of our commitment to health, safety and environmental performance this guide is designed to help you ensure you use and store fluids safely and offers guidance that supports your business in the management of spillage and pollution control.Arco not only offer a fully comprehensive range of reactive spillage minimisation and control products, but also offer a proactive approach to spillage management and prevention via our Training and Consultancy team.

As part of our commitment to keeping people safe in the workplace, we can advise you with an overview of legislation and expert advice on compliance and pollution prevention. We have a fully comprehensive spill product offer and can assist you in the selection of the most appropriate spill control, aftercare and oil storage and containment products required for your site.

Arco Training & Consultancy

The proactive approach to spillage prevention is led by our Training and Consultancy team, who are the specialist arm of Arco that is dedicated to helping customers achieve and maintain full health, safety and environmental compliance.

Arco Training & Consultancy provide a number of bespoke and accredited training solutions to support your business in the following areas:

• Environmental Management Control & Compliance• Control of Substances Hazardous to Health Assessment• Environmental Spill Awareness and Spill Response Training• Fire Training• Emergency Response Team Management

The training offer is enhanced by a competent team of Health, Safety and Environmental Consultants recruited from industry and the largest team of Respiratory Protective Equipment Technicians in the UK. The team offer services such as auditing and gap analysis to help you deliver compliance with environmental management systems, such as BS EN ISO 14001, Personal Protective Equipment Selection and Respiratory Protection Services such as Face Fit Testing through to Respiratory Protective Equipment servicing, maintenance and training.

These services are supported by Arco’s fully comprehensive range of products which includes a vast selection of spillage management and minimisation and pollution control products.

2

Arco is the UK’s leading supplier of personal protective equipment, workwear and workplace safety products offering a world-class range of over 170,000 products.As Experts in Safety we are widely recognised as a provider of specialist advice through our branch network and this is further supported by our training and consultancy division. We reach our customers through an extensive product catalogue, interactive website, local Sales Offices and over 40 Trade Counters. We pride ourselves on providing customers with great availability, performance and price.

Founded in 1884 Arco has a heritage spanning four generations. With traditional family values at the heart of the business we pride ourselves on our core values; respect, hard work, enterprise and excellence in reputation. We fully subscribe to the ETI’s Nine Principles Base code and have fully incorporated the internationally recognised code of labour practice into our own ethical policy. In 2007 Arco was the first distributor in our industry to become a member of the Ethical Trading Initiative (ETI) and in 2010 we became a member of Sedex, the Supplier Ethical Data Exchange. We continually support local communities and charities donating in excess of 1% of pre tax profits annually.

As we are members of the BSIF Registered Safety Suppliers Scheme you can be confident that we will supply safety equipment which is genuine and compliant with the relevant standards and regulations. The BSIF monitor and regulate members of the scheme by conducting regular standards audits.

If you have a spill or any pollution incident you must report it to the Environment Agency immediately 0800 80 70 60 (24 hours, 7 days a week)

Page 3: Environmental Management: Spill Containment & Control

www.arco.co.uk3 4

Pollution Prevention GuidelinesPollution can happen accidentally or deliberately and occurs when substances released to water, land or air have a harmful effect on the environment. Pollutants can put human health at risk and often affect drinking water supplies, business activities, wildlife habitats, and people’s enjoyment and use of the environment.

The Environment Agency’s 10 Point Checklist

Good environmental management is good for business. Many pollution incidents are avoidable and spill management and pollution prevention can help your business avoid and deal with incidents.

The Environment Agency’s 10 point checklist* will help you to understand your environmental requirements.

Source:

GOV.UK: Pollution Prevention Guidelines: PPG1 https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/290124/

LIT_1404_8bdf51.pdf*

You need to understand your premises and how your activities could affect the environment and cause pollution; you should regularly review the pollution linkages you have.

Figure 1: Example of a pollution linkage using source-pathway-receptor model, Pollution Prevention Guidelines PPG1*

Your site and activities will only cause harm to the environment or people if all of the above are present. You should look at ways to break the links or weaken them. By doing this, you can identify how to prevent or reduce the likelihood of pollution and reduce the impact of any problem which may occur.

Almost all premises produce dirty water which could cause pollution if it enters rivers, streams, ditches or groundwater. Many sites also store, handle and use a wide range of other liquid materials which can spill, leak or release their contents if there is a fire or flood. Some of these materials may not seem harmful but can be very damaging to the environment.

Common examples of substances that cause environmental harm include fuels and oils, chemicals, sewage, farm manure and slurry however other materials such as food and drink products and detergents can also cause significant pollution.

By considering the hazards associated with the materials you have, where you store and how you handle them you can reduce the likelihood of pollution happening.

This type of review along with the Environmental Agency, Scottish Environment Protection Agency and Northern Ireland Environment Agency‘s 10 point checklist are the first steps towards developing an environmental management system (EMS), which will allow you to demonstrate a commitment to managing and minimising your immediate and long-term environmental impacts.

SourceExample:

a spill on ground from oil drums

or tanks

PathwayExample:

drains,through soil to groundwater, over hard surfaces

ReceptorExample:

river, stream, lake, groundwater

If you answer no to any of these questions, contact your local sales office to discuss your requirements.

Source:

GOV.UK: Is your site right? http://webarchive.nationalarchives.gov.uk/20140328084622/http://cdn.environment-agency.gov.uk/lit_7254_63a82a.pdf*

Y/N

Site drainage1. Do you know where your drains go? • only clean water, such as roof drainage, to surface water drains • all contaminated water, such as sewage and trade effluent, to foul drains

2. Do you have an up to date drainage plan of your site?

Storing oils, chemicals and other polluting materials 3. Are storage containers fit for purpose, regularly inspected and maintained?

4. Are storage areas and containers sited away from watercourses, surface water drains and unsurfaced areas?

5. Do storage containers have secondary containment, such as a bund, to contain any leaks or spills?

6. Do you have procedures for safe delivery and handling of materials?

Waste management 7. Is your storage and handling of waste safe and does it comply with the law?

8. Do you know where your waste goes? Can you prove it’s disposed of correctly?

9. Are you reducing and recycling your waste?

Emergency response 10. Do you have a plan, equipment and training to deal with pollution and fire emergencies which is regularly tested?

Page 4: Environmental Management: Spill Containment & Control

www.arco.co.uk

A spill can be defined as the uncontrolled release of a substance sufficient in size and nature to present a threat to the environment and / or people. Accidental spills of hazardous liquids, oil, fuel and chemicals can cause serious health and safety and environmental problems and current legislation is in place to protect people and the environment. If spillages are not controlled and damaging consequences occur then severe penalties can be issued to businesses. Having the correct products and procedures in readiness will reduce the negative impact that a spill would cause, not only to people and the environment but also on your business. Arco offer a comprehensive range of spill control products which will enable you to be prepared for any accidental spillage.

If primary and secondary containment fail then dependent on the size and type of spill, the two main methods of dealing with spills are: absorbents which are designed to contain and recover a spillage or loose absorbents such as clay granules and speciality powders which tend to be used for smaller spills.

AbsorbentsAbsorbents are one of the most effective ways of cleaning up spills, having the correct type of absorbents will allow you to manage any potential spillages that may occur. Choose the most appropriate combination for your site needs, alternatively choose a spill control kit and have a quantity of each on site. Absorbents are designed to be used in different ways:

Containment• Socks (Minibooms) are ideal for surrounding a leak

or isolating an area you want to work in when there is a spill risk.

• Booms can be used on land or water to contain a range of spill types, are excellent for preventing pollution entering the water system.

Recovery• Pads can be used anywhere that fluids have

leaked or spilt.

• Rolls provide larger areas of absorbent for placing on a work surface or flooring to provide protection.

• Pillows are excellent for absorbing spills and leaking fluids in tight spaces. Typically used to catch leaks under equipment or drums, but can also be used to skim substances off water.

Arco supply absorbents and spill kits which can be used for three specific groups of liquids, they are colour coded for easy identification:

• Maintenance: designed for non aggressive oil and water based fluids. Maintenance absorbents are hydrophilic and grey in colour.

• Oil: designed for oils, these absorbents are hydrophobic, and so repel water and absorb oil. Suitable for use in areas where an oil spill is considered a high risk, oil absorbents are white in colour.

• Chemical: designed to absorb aggressive chemical spills, these absorbents are yellow in colour. Always ensure the correct PPE and clothing is worn when dealing with chemical spills and that correct disposal of absorbents is undertaken once used.

Loose AbsorbentsGranules are a loose absorbent and a cost effective measure for dealing with oil, fuel, chemical and general spills. Ideal for small areas, they are simply applied around the spill to control it. They gradually mix with the spill, absorb all the excess liquid and can then be easily swept away leaving the surface perfectly dry with no residue.

5 6www.arco.co.uk

Spill Control

Selecting the right range for your site

• Ecospill Premier: A range of absorbents that offer up to 20% more absorbency than other industrial alternatives. Developed to provide a higher wear resistance due to its heavy duty cover stock, Ecospill Premier is produced using only virgin fibres to guarantee a consistent quality and performance.

• Ecospill Sustainable: A range of absorbents which limits the environmental impact of the products. Manufactured using raw materials from sustainable resources the absorbents are also manufactured using a process which requires little heat and delivers a carbon footprint that is 60% less than traditional melt blown absorbent manufacturing processes. These products will provide an automatic continuous improvement qualifying you for your Environmental Management System.

• Arco: A range which provides a cost effective solution to your spillage management programme. Arco absorbents are manufactured to a high specification using strong wear resistant covers and highly absorbent meltblown polypropylene fibres.

• Arco Essentials: A range of great value absorbents which offer a cost effective solution to manage all of your spill requirements.

Page 5: Environmental Management: Spill Containment & Control

www.arco.co.uk 87

Chemical AbsorbentsChemical absorbents are designed for use with aggressive fluids such as acids and alkalis. Colour-coded in ‘hazard’ yellow, not only to warn users to use the correct form of PPE but also to dispose of used product correctly.

Remember to wear the correct PPE when dealing with chemicals.

For our full range of PPE visit the Arco website.

Ecospill Premier AbsorbentsHigh-performance absorbents that offer up to 20% more absorbency than industry standard.

• Made from a heavyweight sonic-bonded polypropylene with a tough wear-resistant top layer for added strength when in use.

• Features bond points which add strength when wet.

Code Product Size Quantity Absorbency (litres)

56L2101 Chemical Pad 50 cm x 40 cm 100 1.2

56L2102 Chemical Roll 50 cm x 40 m 1 120

Spun-bond top cover

MeltBlown polypropylene core

Spun-bond top cover

MeltBlown polypropylene core

Code Product Size Quantity Absorbency (litres)

5656001 Chemical Sheet 50 cm x 40 cm 200 0.5

5656002 Chemical Pad 50 cm x 40 cm 100 0.8

5656003 Chemical Roll 50 cm x 40 m 1 80

5656005 Chemical Pillow 40 cm x 53 cm 10 4

5656006 Chemical Sock 7.5 cm x 1.2 m 25 4

5656007 Chemical Boom 12 cm x 3 m 1 29.5

Arco AbsorbentsOffer a perfect blend of performance, durability and value.

• Made from industry standard polypropylene.

Disposing of AbsorbentsAfter dealing with a spill you must ensure the contaminated absorbents are disposed of in compliance with waste regulations and in clearly labelled hazardous or special waste bags, please refer to the countries’ guidelines you are working to.

Hazardous Waste Bags Blue

Code Quantity

5656400 50

Code Product Size Quantity Absorbency (litres)

56L2118 Chemical Pad 41 cm x 46 cm 100 1

56L2119 Chemical Roll 36 cm x 40 m 1 90

56L2141 Chemical Minibooms 7.5 cm x 1.2 m 20 4

56L2142 Chemical Booms 12 cm x 3 m 1 29.5

Ecospill Sustainable AbsorbentsExcellent absorbency rates combined with excellent environmental credentials.

• Made from recycled fibres.

• Features spun-bond laminated layers for added strength and reduced lint.

• Provides a continuous improvement for ISO 14001 in Environmental Management Systems.

Spun-bond covers top and bottom

Recycled fibre core

For

Spill Kits

see pages 13-16

Page 6: Environmental Management: Spill Containment & Control

www.arco.co.uk9 10

Maintenance AbsorbentsDesigned to absorb non-aggressive chemicals, oil and water-based fluids. Suitable for most indoor industrial applications, these absorbents are ideal for oil, fuel, solvents, coolants, water and foodstuffs such as milk and wine.

Code Product Size Quantity Absorbency (litres)

56L2103 Maintenance Pad 41 cm x 46 cm 100 1.5

56L2105 Maintenance Roll 36 cm x 40 m 1 130

56L2168 Maintenance Roll 90 cm x 40 m 1 325

56L2104 Maintenance Pillow 40 cm x 30 cm 10 4

56L2106 Maintenance Miniboom 7.6 cm x 1.2 m 20 4.5

Ecospill Sustainable AbsorbentsExcellent absorbency rates combined with excellent environmental credentials.

• Made from natural fibres providing advanced fluid retention using SpillLock™ Technology.

• Features spun-bond laminated layers for added strength and reduced lint.

• Provides a continuous improvement for ISO 14001 in Environmental Management Systems.

Recycled fibre core

Spun-bond cover top and bottom

Ecospill Premier AbsorbentsHigh-performance absorbents that offer up to 20% more absorbency than industry standard.

• Made from a heavyweight sonic-bonded polypropylene with a tough wear-resistant top layer for added strength when in use.

• Features bond points which add strength when wet.

Code Product Size Quantity Absorbency (litres)

56L2097 Maintenance Pad 50 cm x 40 cm 100 1.2

56L2098 Maintenance Roll 50 cm x 40 m 1 120

Spun-bond top cover

MeltBlown polypropylene core

Spun-bond top cover

MeltBlown polypropylene core

Arco AbsorbentsOffer a perfect blend of performance, durability and value.

• Made from industry standard polypropylene.

Code Product Size Quantity Absorbency (litres)

5656301 Maintenance Sheet 40 cm x 50 cm 200 0.5

5656302 Maintenance Pad 40 cm x 50 cm 100 1

5656303 Maintenance Roll 50 cm x 40 m 1 100

56L2116 Maintenance Pillow 40 cm x 50 cm 10 4

5656306 Maintenance Sock 7.5 cm x 1.2 m 25 4

Recycled fibre core

Arco Essentials AbsorbentsA range of great value absorbents which offer a cost effective solution to manage all of your spill requirements.

Code Product Size Quantity Absorbency (litres)

56L2194 Maintenance Pad 40 cm x 50 cm 100 0.8

56L2195 Maintenance Roll 36 cm x 40 m 1 72

Disposing of AbsorbentsAfter dealing with a spill you must ensure the contaminated absorbents are disposed of in compliance with waste regulations and in clearly labelled hazardous waste bags, please refer to the countries’ guidelines you are working to.

Hazardous Waste Bags Blue

Code Quantity

5656400 50

Spun-bond cover top and bottom

For

Spill Kits

see pages 13-16

Page 7: Environmental Management: Spill Containment & Control

www.arco.co.uk

Spun-bond top cover

MeltBlown polypropylene core

11 12

Oil AbsorbentsOil absorbents are manufactured with hydrophobic properties; they absorb oil only and repel water. Ideal for outdoor oil spillages they float on water, even when fully saturated with oil, allowing easy pick up and disposal.

Code Product Size Quantity Absorbency (litres)

56L2107 Oil Pad 41 cm x 46 cm 100 1.3

56L2110 Oil Pillow 40 cm x 30 cm 10 4

56L2108 Oil Roll 36 cm x 40 m 1 115

56L2170 Oil Roll 90 cm x 40 m 1 248

56L2109 Oil Miniboom 7.6 cm x 1.2 m 20 4

Ecospill Sustainable AbsorbentsExcellent absorbency rates combined with excellent environmental credentials.

• Made from natural fibres.

• Features spun-bond laminated layers for added strength.

• Provides a continuous improvement for ISO 14001 in Environmental Management Systems.

Spun-bond cover top and bottom

Recycled fibre core

For

Spill Kits

see pages 13-16

Disposing of AbsorbentsAfter dealing with a spill you must ensure the contaminated absorbents are disposed of in compliance with waste regulations and in clearly labelled hazardous waste bags, please refer to the countries’ guidelines you are working to.

Hazardous Waste Bags Blue

Code Quantity

5656400 50

Ecospill Premier AbsorbentsHigh-performance absorbents that offer up to 20% more absorbency than industry standard.

• Made from a heavyweight sonic-bonded polypropylene with a tough wear-resistant top layer for added strength when in use.

• Features bond points which add strength when wet.

Code Product Size Quantity Absorbency (litres)

56L2099 Oil Pad 50 cm x 40 cm 100 1.2

56L2100 Oil Roll 50 cm x 40 m 1 120

Arco AbsorbentsOffer a perfect blend of performance, durability and value.

• Made from industry standard polypropylene.

Code Product Size Quantity Absorbency (litres)

5656201 Oil Sheet 50 cm x 40 cm 200 0.5

5656202 Oil Pad 50 cm x 40 cm 100 1

5656203 Oil Roll 50 cm x 40 m 1 100

5656204 Oil Roll 90 cm x 40 m 1 180

5656205 Oil Pillow 40 cm x 50 cm 10 6

5656206 Oil Sock 7.5 cm x 1.2 m 25 4

5656207 Oil Boom 12 cm x 3 m 1 29.5

5656208 Oil Boom 20 cm x 3 m 1 79

Spun-bond top cover

MeltBlown polypropylene core

Arco Essentials AbsorbentsA range of great value absorbents which offer a cost effective solution to manage all of your spill requirements.

Code Product Size Quantity Absorbency (litres)

56L2192 Oil Pad 40 cm x 50 cm 100 0.8

56L2193 Oil Roll 36 cm x 40 m 1 72

Recycled fibre core

Spun-bond cover top and bottom

Page 8: Environmental Management: Spill Containment & Control

www.arco.co.uk

Code Product

56L2167 Chemical

56L2166 Maintenance

56L2165 Oil

Code Product

56L2128 Chemical

56L2127 Maintenance

56L2126 Oil

Code Product

56L2125 Chemical

56L2124 Maintenance

56L2123 Oil

Code Product

56L2122 Chemical

56L2121 Maintenance

56L2120 Oil

Code Product

56L2162 Chemical

56L2163 Maintenance

56L2164 Oil

Code Product

56L2174 Chemical

56L2173 Maintenance

56L2172 Oil

1413

Spill Response KitsArco Spill Kits are designed to offer the perfect combination of pads, socks (minibooms), booms, sheets & hazard waste bags to deal with your spill risk. The kits are designed to be strategically placed at key spill risk areas to provide an immediate solution should a spill occur. Once used, the contents should be maintained and stock replaced by purchasing the individual items.

Ecospill Sustainable Spill Kits

250 LitreSupplied in a 340 litre Overpack drum.

Contents include - 100 pads, 20 socks, 5 disposal waste bags and ties, 1 hazard warning tape 50 m, 1 spill kit instruction/ incident leaflet.

50 LitreSupplied in a durable holdall.

Contents include - 30 pads, 4 socks, 5 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

25 LitreSupplied in a polypropylene bin.

Contents include - 10 pads, 1 sock, 2 pillows, 2 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

Ecospill Premier Spill Kits

50 LitreSupplied in a durable holdall.

Contents include - 25 pads, 3 socks, 2 pillows, 5 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

15 LitreSupplied in a durable holdall.

Contents include - 8 pads, 1 sock, 2 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

30 LitreSupplied in a durable holdall.

Contents include - 16 pads, 2 socks, 4 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

Page 9: Environmental Management: Spill Containment & Control

www.arco.co.uk 1615

Arco Spill Response Kits

1000 LitreSupplied in a drop front durable plastic container.

Contents include - 300 pads, 6 x 3 m socks, 2 rolls, 16 pillows, 6 x 3 m booms, 1 floor sign, 1 hazard warning tape 50 m, 60 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

250 LitreSupplied in a polypropylene bin.

Contents include - 100 pads,100 sheets, 20 socks (Oil and Maintenance) or 20 minibooms (Chemical), 1 boom, 1 x 1 kg drum plug, 1 hazard warning tape 50 m, 10 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

500 LitreSupplied in a durable plastic container.

Contents include - 190 pads, 20 x 1.2 m socks, 4 x 3 m socks, 16 pillows, 1 floor sign, 1 hazard warning tape 50 m, 40 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

120 LitreSupplied in a polypropylene bin.

Contents include - 60 pads, 12 socks, 1 x 1 kg drum plug, 1 hazard warning tape 50 m, 5 disposal waste bag and tie, 1 spill kit instruction/incident leaflet.

Code Product

56L2209 Chemical

56L2210 Maintenance

56L2211 Oil

Code Product

56L2212 Chemical

56L2213 Maintenance

56L2214 Oil

Code Product

5656126 Chemical

56L2062 Maintenance

5656226 Oil

90 LitreSupplied in a polypropylene bin.

Contents include - 65 pads, 12 minibooms and 1 x 1 kg drum plug (Chemical) or 50 pads and 10 socks (Oil) or 57 pads and 12 socks (Maintenance), 5 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

Code Product

5656123 Chemical

56L2112 Maintenance

5656223 Oil

30 Litre Supplied in a clip top bag. Ideal for trucks and tankers.

Contents include - 20 pads and 4 minibooms (Chemical and Maintenance) or 20 pads and 4 socks (Oil), 2 disposal waste bags and ties, 1 spill kit instruction/incident leaflet.

Code Product

5656122 Chemical

56L2061 Maintenance

5656222 Oil

15 Litre Supplied in a clip top bag. Ideal for trucks and tankers.

Contents include - 10 pads and 2 minibooms (Chemical and Maintenance) or 10 pads and 2 socks (Oil), 1 disposal waste bag and tie, 1 spill kit instruction/incident leaflet.

Code Product

5656121 Chemical

56L2060 Maintenance

5656221 Oil

Code Product

56L2063 Maintenance

56L2111 Oil

Page 10: Environmental Management: Spill Containment & Control

www.arco.co.uk17 18

Spill Control AccessoriesAbsorbent Granules

Spill-AidTM AbsorbentAbsorbs all liquids from any surface leaving it clean and dry instantly.

• Absorbs: Oil, Petrol, Diesel, Grease, Acid (excluding Hydrofluoric), Alkalis, Anti-freeze, Paints, Blood and Oils.

• Works instantly transforming the liquid into a solid form allowing for efficient and easy removal.

Absorbent granules are a solution designed for quick and efficient clean up of oil, fuel, chemical and general spills. Ideal for use on small spill areas granules completely absorb the spill and turn it into a solid so that it can be easily swept up. Contaminated granules should be disposed of appropriately.

Code Size (litres)

5656505 5

5656530 30

Spill-AidTM Spill CaddyA quick and convenient, all-in-one spill kit and caution sign. The vinyl Spill Caddy contains all the necessary cleaning materials to respond to a general spill.

• Contains: dustpan and brush, disposable waste sacks, gloves, 5 Litre Spill-Aid™ absorbent granules.

Code

5656531

Absorbent GranulesOffer maximum absorbency for oil spills and also suitable for use with most non aggressive fluids. Containing premium grade granules with a size of 1-3 mm which are virtually dust free. This compound is flame retardant conforming to M.O.D. specifications and meets British Rail Specifications 629 A, (British Rail CAT No 7 / 19887 British Rail Contract No: 245). One bag of granules will absorb 14 litres of water or 12 litres of oil.

Code Size (litres)

5650200 30

Contractor’s Absorbent CompoundA value for money sweeping compound for dealing with liquid spills. This compound meets British Rail Specifications 629 A, (British Rail CAT No 7 / 19887 British Rail Contract No: 245). One bag of compound will absorb 11 litres of water and 6 litres of standard engine oil.

Code Size (litres)

5650300 20

Organic Absorbent CompoundManufactured using green cellulose from natural sustainable sources. One bag of compound will absorb 15 litres of oil.

Code Size (litres)

5650400 30

Page 11: Environmental Management: Spill Containment & Control

www.arco.co.uk 2019

Specialist Absorbents and Mats

Code Product

56L2200 Chemical

56L2201 Maintenance

56L2199 Oil

Spill & Go Roll Made from highly absorbent natural fibres chosen specifically for performance and fluid retention. Laminated for extra strength and includes SpillLock™ Technology that turns water based fluids into a leak resistant gel. Spill & Go is a convenient absorbent roll that can be easily stored and carried.

Code Product Size Absorbency (litres)

56L2144 Maintenance 36 cm x 22 m 48

56L2143 Oil 36 cm x 22 m 48

WaterWickA super absorbent strip, which turns aqueous based liquids into a leak-resistant gel. Perforated every 60 cms allowing you to only use what you need. WaterWick features a strong, highly visible spunbond cover with warning messages printed in four different languages.

Code Size Absorbency (litres)

56L2202 30 m x 10 cm 64

Ecospill Multi Roll Four high-performance absorbents rolled into one. Can be used as a pillow or sock right out of the box or simply break the spot welds and open it up to a full sized pad or split roll. Each box contains a 15 m x 40 cm wide roll with a total absorbency of 36 litres.

Code Product

56L2198 Chemical

56L2197 Oil

Coolant Maintenance SockDesigned to build a containment barrier around machinery, the coolant maintenance sock is 2 m long with hook and eye fasteners at each end to create a positive seal. The sock is covered with a knitted sleeve giving it flexibility and making it suitable for tight corners. Retaining its shape as it fills with leaking coolant the sock has a total absorbency of 9 litres, increasing the length of time between changeovers.

Code

56L2215

RailmatRailmat is a specially designed mat manufactured from sustainable and recycled materials that fixes between railway lines. The mat is hydrophobic so allows rain water to run off, but traps oil based spills in the natural fibre layer. It is very effective for preventing oil and petroleum based fluids leaking from rail vehicles onto the track ballast or sub surface below. Railmat can be secured firmly in place using the rope ties included and a number of mats can be joined together to protect longer sections of track.

ADR Vehicle Spill KitDesigned to help haulage contractors comply with the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) regulation, whereby drivers should be aware of hazards arising from the carriage of dangerous goods and should be able to take measures to limit the effects of an incident. Contents include chemical socks and pads to contain and recover aggressive chemical spills and a Bentonite drain cover that can be moulded around a drain to seal it off from liquid spills.

Code Size (W x L)

56L2216 147 cm x 4 m

Page 12: Environmental Management: Spill Containment & Control

www.arco.co.uk21 22

Spill Dispensing Stations

Spill Dispensing StationManufactured from steel this unit is both a functional storage unit and an absorbent dispenser. The Spill Dispensing Station provides easy access to the absorbents when a spill emergency occurs and features a roll holder at the top for ease of dispensing and a lockable unit at the bottom to secure items. The unit can be used to store Ecospill Premier, Ecospill Sustainable, Arco and Arco Essentials absorbents.

Size: (L x W x H) 560 x 550 x 1351 mm

Code Product

56L2113 Station

56L2130 Station c/w Chemical Absorbents

56L2129 Station c/w Maintenance Absorbents

56L2131 Station c/w Oil Absorbents

Store absorbents in an area which is both highly visible and convenient so they can be quickly and easily accessed in the event of a spill. Dispensing stations can be used to store a combination of absorbents including pads, rolls or socks (minibooms). Keeping absorbents readily available means that they are on hand for use in an emergency and they can also be used on a day to day basis for small spills. Always ensure that the contents of the unit are topped up as and when any absorbents have been used. Should you have a requirement for several spill dispensing stations around your site; Arco can offer management and restocking of units.

Plastic Spill Dispensing StationManufactured from strong polypropylene this Spill Dispensing Station offers a convenient way to store and access absorbents when a spill incident occurs. The unit features a roll holder which is suitable for Ecospill Premier, Ecospill Sustainable, Arco and Arco Essential absorbent rolls. The lockable unit below allows for additional items which are required less frequently to be stored securely.

Size: (L x W x H) 550 x 640 x 1170 mm

Code Product

56L2089 Station

56L2139 Station c/w Chemical Absorbents

56L2138 Station c/w Maintenance Absorbents

56L2140 Station c/w Oil Absorbents

Drain ProtectionAs soon as a spill occurs any nearby drains should be blocked to avoid the substance contaminating the drainage system. Keep drain protection items in a convenient location that is easily accessible when a spill occurs.

Ecospill Ecoblock Drain SystemA reusable and portable, manually-operated spill containment system designed to temporarily block-off drains in the event of an accidental discharge. A deflated bladder is inserted into the drain, with the aid of a telescopic pole and once inflated, creates a bund allowing containment and fluid recovery and/or recycling.

• Contains: Manual hand pump, telescopic pole, bladder, 5 metre airline, pressure gauge and carry bag.

Code

56L2176

Spill BarrierThis Polyurethane barrier is perfect for fluid containment or even diversion from an at risk drain. Material is soft but durable and creates a positive seal on uneven surfaces such as a tarmac road. Used as a key component to bulk tanker procedure. Water, oil and chemical resistant.

Product Size (L x W x H)

56L2196 300 x 6 x 5 cm

Drain Cover Set Polyurethane Drain Mat Clay Drain Mat

Code Size (cm)

5656500 100 x 100

Code Size (cm)

5657110 60 x 60

Code Size (cm)

5657000 45 x 65

5657010 45 x 45

Contains: 1 x neoprene mat 1 m 1 m x1.5 mm and 2 x 1 kg drum plug to seal the edges of the mat.

Tough, durable top layer and a flexible, tacky bottom layer that provides a positive seal over a drain. Resist oil, water and most chemicals.

Fabric reinforced mat for sealing drains in the event of a chemical or oil spill. Ideal for irregular surface contours or joints.

Page 13: Environmental Management: Spill Containment & Control

www.arco.co.uk

Code Quantity

56L2204 100

23 24

Pollution PreventionFiltration systems are a simple and economic way of dealing with contaminated water. They remove hydrocarbons and sediment to almost non-detectable levels helping you to comply with the Environment Agency Pollution Prevention Guidelines PPG6, which require that the majority of suspended solids (gravel, sand, and silt) must be removed from site water before it is discharged into a drain, sewer or watercourse. Filtration systems can be used in a wide range of dewatering applications without slowing up the pumping process and can negate the need for costly third party settlement tanks or vacuum lorries.

FiltasiltPortable and easy to handle, Filtasilt is an innovative solution for sediment separation and is ideal for day to day use. It removes oil from water down to 3.5 parts per million (PPM) and solids down to 80 microns, meaning it is suitable to pump onto open ground. Used only for sediment it is totally reusable. Ideal for dewatering trenches for Utility companies.

The Filtasilt has a highly visible indicator strip, which turns blue when it has reached its absorbent capacity in oil/hydrocarbon.

Code Size (L x W)

56L2185 120 x 40 cm

FiltasockThe Filtasock filtration system uses multi-stage carbon activated filtration to remove hydrocarbons and sediment to almost non-detectable levels. The Filtasock filtration system is one of the most simple and economical ways of dealing with contaminated water being pumped out of manholes, vaults, sumps, bunds, retention ponds and ditches.

The discharge level of oil contamination from 5000 PPM is an amazing 2.31 PPM given the consent level is set at 5 PPM. It is reusable until the colour coded indicator turns to dark blue. Based on a contamination level of 500 PPM Filtasock can filter 25,000 litres of contaminated water.

Green Rhino Economy Filtration SystemA low cost filter that can be used for mobile pumping operations, negating the need for third party settlement tanks or vacuum lorries. Removes approximately 20 kg of sediment from contaminated water.

Code 56L2177

Green Rhino Sediment Filtration SystemA highly reusable filter designed to prevent sediment pollution caused when pumping water from excavations. Includes a hydrocarbon detection strip which turns dark blue to identify oil pollution. Retains approximately 20 kg of sediment.

Green Rhino Oil & Sediment Filtration SystemA highly reusable system for the removal of sediment and oil-sheen from pumped water. This rugged filter can be used for mobile pumping operations negating the need for third party settlement tanks or vacuum lorries. Includes a hydrocarbon detection strip which turns dark blue to identify oil pollution. Retains approximately 20 kg of sediment and up to 2.5 litres of hydrocarbon sheen.

Green Rhino Evac Filtration System Green Rhino Detection Strips

PROBLEM SOLUTION

PROBLEM SOLUTION

PROBLEM SOLUTION

A multi-layer filter that contains polymer technology to help remove hydrocarbons, it removes up to 20 kg of sediment down to 1 micron in size and up to 2 - 3 litres of oil-sheen. The filter has a flow rate at 380 litres / min (pump dependent), is fitted with a 2 in male Camlock coupling and is light enough for one person to lift when full. The hydrocarbon detection strip turns dark blue to identify oil pollution.

Code 56L2178

Code 56L2179

Code 56L2205

Can quickly and accurately determine the presence of hydrocarbons in water prior to pumping. If hydrocarbons are present, the detection strip will change colour to dark blue.

Code 56L2175

Page 14: Environmental Management: Spill Containment & Control

www.arco.co.uk25 26

Green Rhino Low Flow Hydrocarbon FilterDesigned to prevent bunds and tanks filling with water and potentially overflowing or requiring on-going maintenance. The filter allows rainwater to flow through as it removes and captures oil contamination and sediment. Automatically shuts off in the event of a catastrophic breach. Can be retrofitted to existing products. Also available in 1, 3 and 6 litre capacities.

Code Capacity (litres)

56L2203 2

Green Rhino Dewatering PackA simple three phase system that can be used to remove hydrocarbons – oil, diesel, transformer fluid, petrol etc from water down to non-detectable levels.

Start by quickly and accurately determining the presence of hydrocarbons by using the detection strips, which change colour if contamination is present.

The polymer pillows can then be used to remove the contamination. The pillows contain a unique blend of granules that solidify within minutes of contact retaining 1 litre of hydrocarbon.

Once the pillows have collected the oil the remediated water can be processed through the Oil & Sediment filter for a final polish allowing it to be safely pumped into the environment.

Can be used in multiple locations including bunds, excavations, trenches, manholes, outfalls and interceptors.

Contains: 5 Detection Strips, 5 Polymer Pillows and 1 Oil & Sediment Filtration System.

Code Capacity (litres)

56L2180 136

Test the water for contaminants Use the Polymer pillows to remove the contaminants

Water can be pumped from the excavation through the Oil & Sediment Filtration System

Plant Nappy® & LinerThe Plant Nappy is a light user-friendly method of spill containment; designed to replace existing, traditional drip trays and ideal for use with generators and other site machinery. Rugged enough for use outside all year round to provide containment of oil and fuel spills. The Plant Nappy Liner sits inside the base of the Plant Nappy and filters and separates oil by absorbing it and discharging clean water only.

Plant Nappy Plant Nappy Liner – Oil Only

Code Size (cm) Code Size (cm)

56L2132 50 x 68.5 56L2135 50 x 68.5

56L2133 100 x 68.5 56L2136 100 x 68.5

56L2134 200 x 137 56L2137 200 x 137

Green Rhino EnviroPadThe EnviroPad is a lightweight, durable and versatile spill pad that can be used for a variety of pollution prevention purposes, from simple storage of small plant, tools, fuel storage containers and more. The mat contains a unique polymer that is hydrophobic, which allows water to pass through it, and is oleophilic to solidify hydrcarbons upon contact.

Code Size (cm) Capacity (litres)

56L2206 61 x 46 Up to 3

56L2207 90 x 69 Up to 7

56L2208 137 x 218 Up to 28

Page 15: Environmental Management: Spill Containment & Control

www.arco.co.uk27 28

Spill Aftercare

Bioremediation involves the use of microorganisms to remove oil stains. Arco can offer a wide range of solutions to help remove oil stains. Solutions are available for both solid and porous surfaces and stains can be removed effectively from concrete, block paving, tarmac or brick bund walls. Bioremediation involves using enzymes that are activated by the introduction of water. Once activated they feed on any oil present, converting it into carbon dioxide and dirty water. For more information contact your local Arco branch.An example showing pictures of a before and after bioremediation trial can be seen below. You can see a heavily soiled concrete surface being treated then left for 40 minutes followed by a second picture showing the results.

Arco Oil EmulsifierArco Oil Emulsifier is designed to be used with cellulose absorbents in all areas of oil and hydrocarbon bioremediation, and is intended for use with hydrocarbon spillages during road building. The solution uses bacterial activity to emulsify the hydrocarbon chains into fatty acids, and eventually sugar and water. The emulsifier is non-corrosive, non-flammable and biodegradable. Supplied in a 5 litre container.

Code 5656401

Ecozyme 1 Universal EnzymeThis is an enzyme-based oil stain remover that can be diluted up to 10 times depending on the application and method of use. It can be applied neat or diluted for use with trigger sprays, mop buckets and floor scrubbers. Stains can be removed within 10-40 minutes depending on dilution. This is a universal enzyme that can be used on all surfaces.

Ecozyme 2 Heavy-Duty ConcreteA very effective enzyme for removing stains from concrete surfaces and block paving that is not suitable for tarmac surfaces. This is very effective on very old stains on factory floors or bulk delivery areas. Apply directly onto the stain then rinse off after designated time.

Ecozyme 3 Heavy-Duty TarmacSuitable for all surfaces including tarmac roads very effective for diesel stain removal easy to apply and can produce results very quickly depending on the age of the stain. Pour directly onto the affected area, brush in and leave for 20-30 minutes before rinsing off.

Ecozyme 4 Enzyme Porous SurfacesDeveloped for porous conditions to clean up hydrocarbon spillages on railway ballasts or loose aggregates. Apply to required area, keep moist and cover with a polythene sheet.

Code Container size (litres)

56L2152 5

56L2153 10

Code Container size (litres)

56L2145 1

56L2146 5

56L2147 25

Code Container size (litres)

56L2149 1

56L2150 5

56L2151 25

BEFORE AFTER

Code Container size (kg)

56L2148 25

Bioremediation

Page 16: Environmental Management: Spill Containment & Control

www.arco.co.uk29 30

Oil Storage RegulationsOil storage regulations are now a legal requirement in both England and Scotland. In Ireland and Wales companies need to be aware of their duty of care in terms of pollution and the environment. If you are unsure and need help and support with these issues contact your nearest Arco branch.

If you are located in England the Control of Pollution (Oil Storage) (England) Regulations 2001 will apply. In Scotland you will be covered by the Water Environment (Oil Storage) (Scotland) Regulations 2006. The appropriate legislation for Northern Ireland is the Control of Pollution (Oil Storage) (Northern Ireland) Regulations SR2010/412. Wales is not covered by these regulations but there may be other legislation which applies in this area.

These regulations apply to any industrial, commercial or institutional site storing 200 litres or more of oil or fuel above ground in one or more containers. In England the regulations only apply to outdoor storage, although the recommended ‘Pollution Prevention Guidelines’ from the environment

agency would apply to indoor storage. In Scotland the regulations apply to both outdoor and indoor storage.

The Oil Storage Regulations are designed to prevent oil spills. In the event of a spill accident you may be prosecuted and fined if oil from your site enters the ground or watercourses. You may also have to pay substantial clean-up costs.

All containers storing oil or fuel, whether a drum, an IBC (Intermediate Bulk Containers) or a tank must be sufficiently bunded within themselves or stood on a spill pallet or drip tray that provides sufficient containment. The bund must have sufficient capacity to:

• Contain 110% of the contents of the largest container;

• Or 25% of the total capacity stored, whichever is greater.

In the case of single drums, a drip tray with a capacity of 25% of the contents is normally acceptable, apart from drums sited in high-risk areas.

Primary containment will ordinarily prevent spills from happening.All hazardous liquids should be stored in containers which are fit for purpose, correctly labelled and then regularly inspected and maintained to ensure that they are not corroded or leaking.

As a further precaution we would recommend secondary spill containment with containers being stored on spill pallets or trays which would contain any small leaks.

All containers should be stored in areas which are sited away from water courses, drains and unmade surfaces.

It is essential that pollutants are not allowed to enter water courses such as brooks, streams, rivers and lakes, nor should they be allowed to leach through the ground layer

and enter the water table. Spills should not be allowed to spread into the local environment particularly conservation areas and populated districts.

Any operations involving containers of hazardous liquids, such as unloading or decanting must not take place over an open drain. We would recommend that procedures are put in place for the safe delivery and handling of all liquid materials and that training on these procedures is provided.

Page 17: Environmental Management: Spill Containment & Control

www.arco.co.uk31 32

Code Size (L x W x H) mm

56A2322 387 x 159 x 83

Enpac® Universal Cylinder Bracket™

An easy solution for safe storage of cylinders from 75 mm to 305 mm diameter that can be wall or truck mountable (fixings not included). Units can be interlinked and include straps for greater security.

Enpac® Secondary Containment

Code Size (L x W x H) mm Size (L x W x H) mm

56A3002 2-Drum Spill Pallet 1520 x 950 x 1840

56A3004 4-Drum Spill Pallet 1650 x 1470 x 1750

56A3301 Ramp

56A3302 Ramp Extender

Enpac® Poly Hardcover & Spill PalletThis lockable (locks not supplied) unit comes complete with spill pallet and removable heavy-duty anti-slip grates. Twin-roll top design allows use where space is limited and allows access from both sides. Ideal for use with hydro-carbon based liquids and compliant with oil storage regulations.

Enpac® Poly Drum PalletsKeep overflows and spills off the floor in the ultra-strong Poly Pallet where they can be easily recovered. Semi-translucent design permits easy visual inspection and non-slip removable structural foam grates allow for easy cleaning.

Code Product Size (L x W x H) mm UDL Capacity (kg) Sump Capacity (litres)

56A2426 2-Drum Spill Pallet 1370 x 740 x 430 680 225

56A2430 4-Drum Square Spill Pallet 1372 x 1372 x 300 1361 249.8

56A2410 4-Drum In-line Spill Pallet 2480 x 635 x 305 1361 249.8

Enpac® Workstation FlooringA fully modular flooring system that becomes part of your factory floor, optimising space for increased safety and efficiency. Modules are designed for standalone use or can be combined with other workstations for a customised work area.

Manufactured from 100% recycled polyethylene that cannot rust or corrode and has a unique rolled-edge to resist warpage. Modules feature large sump capacities and removable heavy-duty anti-slip grates.

Code Product Size (L x W x H) mm UDL Capacity (kg) Sump Capacity (litres)

56A2424 2-Drum Flooring Module 1350 x 720 x 150 680 83.2

56A2422 4-Drum Flooring Module 1330 x 1350 x 150 1361 155

56A2420 6-Drum Flooring Module 1940 x 1350 x 150 2041 230.9

56A2414 8-Drum Flooring Module 2540 x 1350 x 150 2722 291.4

56A2416 Ramp 650 x 1220 x 150

56A2418 Link Lock pack of 2

Code Product

56A2104 Dolly

56A2106 Sump Liner

Enpac® Poly DollyMulti-functional mobile dispenser and secondary containment unit. The enclosed, 300 litre sump, keeps spilt liquid safe and the ergonomic wheelbarrow design allows transportation of a 210 litre drum with minimal effort.

Code UDL Capacity (kg)

56A3202 544

Enpac® Poly SafetypackTough and robust unit with twin lockable (twin padlocks supplied) gull-wing covers capable of storing two 210 litre drums with 513 litres of containment. Excellent resistance to all weather conditions as well as chemicals.

Enpac® Poly Spill ScooterEasily transports single drums around your plant/factory whilst keeping the drum vertical.

Code Size (H x Dia) mm UDL Capacity (kg)

56A5205 230 x 880 225

Enpac® Poly Spill TraysIdeal for temporary protection against accidental drum spills, use with either 210 litres or 25 litre drums.

Code Capacity (litres) Sump Capacity (litres)

56A2220 25 28.5

56A2218 210 74

Code Capacity (litres)

56A2011 51

56A2013 114

56A2020 361

Enpac® Poly Overpack Salvage DrumsTight, secure and leak-free containers that safely hold a wide range of hazardous materials including acids, corrosives and damaged parts. Meets UN, US and DoT regulations.

Enpac® Poly Rack SystemCombine the Rack Base, Rack Stack and Rack Shelf to create an efficient drum storage and dispensing system. The base holds two 210 litre drums and has a 375 litre sump capacity, the stack holds an additional two 210 litre drums and the shelf can be attached to the stack to catch spills during dispensing. A small hole also allows drainage into the base.

Code Product

56A2210 Rack Base

56A2212 Rack Stack

56A2214 Rack Shelf

Rack Shelf

Rack Base

Rack Stack

Page 18: Environmental Management: Spill Containment & Control

www.arco.co.uk

Spill PalletThe Arco Spill Pallet is suitable for use with drums containing oils, fuels and other fluids. It enables the storage of oil in compliance with oil storage regulations in England, Wales and Scotland. Manufactured from 100% recyclable structural grade polyethylene it can be used both indoors and outdoors. The Spill Pallet features a removable platform to assist maintenance and a smooth finish to platform and pallet enables easy cleaning.

Heavy Duty Spill PalletDesigned for the safe and compliant storage of 205 litre drums. These robust, quality units are made from 100% polypropylene with broadband chemical compatibility.

Bunded Flooring ModuleA fully modular flooring system for the safe storage of drums in internal dispensing areas to maintain a safe and tidy site. Modules can be used individually or linked together to create a larger storage area. Manufactured in the UK using 100% recyclable structural grade polyethylene the Flooring Modules can be used both indoors and outdoors. Each module features removable platforms with a slip-resistant texture.

Arco Secondary Containment

Tray and FunnelA tray and funnel designed to be used in conjunction with each other when loading contents into a drum. Designed for use with 210 litre drums the tray ensures any residue liquid is caught and contained and the funnel features high sides to contain splashes and enables accurate filling of the drum.

Code Product Size (L x W x D) mm Capacity (litres) UDL Capacity (kg)

56L2028 2-Drum Spill Pallet 1220 x 820 x 330 240 650

56L2029 4-Drum Spill Pallet 1280 x 1280 x 275 230 1250

Code ProductSize (H x Dia) mm

Capacity (litres)

Weight (kg)

56L2040 Tray 240 x 870 50 5

56L2039 Funnel 230 x 610 4

Code Product Size (L x W x D) mm Capacity (litres) UDL Capacity (kg)

56L2187 2-Drum Spill Pallet 1220 x 820 x 345 230 680

56L2188 4-Drum Spill Pallet 1220 x 1220 x 390 250 1365

Code Product Size (L x W x D) mm Capacity (litres)

56L2030 2-Drum Bunded Flooring Module 1260 x 860 x 150 150

56L2031 4-Drum Bunded Flooring Module 1660 x 1260 x 150 300

56L2034 Linking Unit 1500

56L2035 Linking Unit 700

56L2036 Ramp 650 x 800 x 160

33 34

Page 19: Environmental Management: Spill Containment & Control

www.arco.co.uk35 36

All-Weather Spill PalletThis all-weather spill pallet is ideal for the outside storage of up to four drums. It is easy to use with shutter doors that can be secured with a padlock (not supplied) for extra security.

Drum Store and Dispensing Stacking UnitCombines the horizontal stacking unit with the base and dispensing unit to deliver efficient storage of 205 litre drums. Ideal for secure dispensing and storage of drums when limited space is available.

Bunded DollyEliminates the risk of spills during transportation with its large sump capacity. The removable grate allows easy cleaning and a drain plug allows for quick drainage if a spill occurs.

Bunded TrolleyEasily transports single drums whilst keeping them vertical. Ideal for waste collection or mobile dispensing.

Bunded Transport and Dispensing TrolleyThis Trolley can be used to ensure the easy and safe transportation of 250 litre drums, requiring one operator only to load and transport the drum. The Trolley can be used as additional drum storage or as a convenient dispensing unit. Using the trolley to control dispensing will ensure all spills are caught when pouring contents.

Code Product Size (L x W x D) mmCapacity (litres)

56L2190 2-Drum All-Weather Spill Pallet c/w 3-Tier PE Shelving 900 x 400 x 970 230

56L2191 2-Drum All-Weather Spill Pallet c/w Steel Drum Cradle 810 x 470 x 1210 230

56L2184 4-Drum All-Weather Spill Pallet 1470 x 1420 x 2070 280

56L2186 Ramp 1740 x 1000 x 370

Code Product Size (L x W x D) mmCapacity (litres)

UDL Capacity (kg) Weight (kg)

56L20372-Drum Horizontal Store & Stacking Unit

1375 x 940 x 390 1350 15

56L20382-Drum Horizontal Base & Dispensing Unit

1375 x 1350 x 635 450 1350 46

Code Size (L x W x H) mm Capacity (litres)

56L2182 725 x 725 x 990 30

CodeSize (L x W x H) mm

Capacity (litres)

UDL Capacity (kg)

56L2183 900 x 700 x 980 100 225

CodeSize (L x W x D) mm

Capacity (litres)

Safe Working Load (kg)

56L2042 815 x 1740 x 680 250 300

Page 20: Environmental Management: Spill Containment & Control

www.arco.co.uk

Code Capacity (litres)

56L2203 2

Spill TraysDesigned to accommodate the requirements of all industries, Arco Spill Trays provide a versatile modular system for the storage of smaller containers. Optional platform inserts provide a unique non-slip textured upper surface.

IBC Spill PalletsArco Spill Pallets are manufactured from strong polypropylene which will withstand all environments. Single IBC pallets can be supplied in conjunction with the following accessories:

• complete with load platform for extra strength• complete with load platform plus an integral bucket to allow for easy dispensing

Code Capacity (litres) Size (L x W x D) mm Safe Working Load (kg)

56L2054 20 600 x 400 x 155

56L2053 20 with platform 600 x 400 x 155 50

56L2056 30 800 x 400 x 155

56L2055 30 with platform 800 x 400 x 155 50

56L2058 40 800 x 600 x 155

56L2057 40 with platform 800 x 600 x 155 100

Code Product Size (L x W x D) mm Capacity (litres) UDL Capacity (kg)

56L2046 Single IBC Pallet 1590 x 1455 x 715 1125 1500

56L2047Single IBC Pallet with Load Platform

1760 x 1350 x 710 1100 1500

56L2049Single IBC Pallet with Load Platform and Integral Bucket Space

1950 x 1400 x 725 1100 1500

56L2051Double IBC Pallet with Load Platform

2560 x 1350 x 510 1140 2500

IBC Dispensing TrayDesigned for use with any IBC Pallet this useful tray can be moved into place when required to avoid spillage when dispensing from IBCs.

Code Product Size (L x W x D) mm Capacity (litres)

56L2048 IBC Dispensing Tray 1450 x 1450 x 1000 100

Managing Drum StorageRainwater and other liquids can greatly reduce the containment capacity of a tank or bund and should be bailed out in a controlled way and, if contaminated, should be legally disposed of.

Green Rhino Low Flow Hydrocarbon FilterDesigned to prevent bunds and tanks filling with water and potentially overflowing or requiring on-going maintenance. The filter allows rainwater to pass through but prevents oil contamination and sediment from entering the environment. Automatically shuts off in the event of a catastrophic breach. Can be retrofitted to existing products. Also available in 1, 3 and 6 litre capacities.

Bunded Economy StoreManufactured from corrugated, galvanised steel this store has a lockable door (2 keys provided) which allows drums to be stored securely. The sump has a 1000 litre capacity and is manufactured from fully seam welded 3mm galvanised mild steel, meeting all current regulations regarding sump capacities. The grid mesh floor is capable of supporting 1000kg/m². Shelving is supplied as an optional extra.

Steel Drum Storage

Code Product Size (L x W x D) mm

4569923 Bunded Store 3.06 x 2.05 x 2.23

4569924 1.8 m Shelving Option

4569925 0.9 m Shelving Option

External IBC StoresThis vandal-proof all steel safety store with storage on 2 levels can be padlocked (not supplied) and the steel bund is suitable for flammable liquids and most chemicals.

• Bunding under floor level is leak tested and certified• Side air vents for good natural airflow throughout• Grid mesh decking for small/loose container storage

Code Product Size (L x W x D) mmNo. of Pallets

Sump Capacity (litres)

Weight (kg)

4569920 4 IBC Store 3.1 x 1.5 x 3.1 4 1050 1300

4569921 8 IBC Store 5.9 x 1.5 x 3.1 8 2100 2200

4569922 12 IBC Store 8.8 x 1.5 x 3.1 12 3150 3200

External Safety StoresThis vandal-proof all welded 2 mm steel safety store can be padlocked (not supplied) and the steel bund is suitable for flammable liquids and most chemicals.

• Bunding under floor level is leak tested and certified

• Safety signage• Side air vents for good natural airflow throughout• Grid mesh decking on floor and 600 mm shelves on

internal walls for small/loose container storage• Available in a choice of colours

Code Size (L x W x H) mmSump Capacity (litres)

Weight (kg)

4569914 2.5 x 2.5 x 2.45 800 900

4569915 3.7 x 2.5 x 2.45 1100 1500

4569916 4.9 x 2.5 x 2.45 1400 2200

External Drum StoresThis vandal-proof all steel safety store can be padlocked (not supplied) and is suitable for flammable liquids and most chemicals.

• Bunding under floor level is leak tested and certified• Side air vents for good natural airflow throughout• Grid mesh decking for small/loose container storage

Code Product Size (L x W x D) mmNo. of Levels

No. of Pallets

Sump Capacity (litres)

Weight (kg)

4569917 8 Drum Store 3.1 x 1.5 x 1.8 1 2 500 900

4569918 16 Drum Store 3.1 x 1.5 x 3.1 2 4 900 1400

4569919 32 Drum Store 5.9 x 1.5 x 3.1 2 8 1800 2400

• Safety signage• Available in a choice of colours

• Safety signage• Available in a choice of colours

37 38

Page 21: Environmental Management: Spill Containment & Control

Aberdeen

LinlithgowGlasgow

BellshillIrvine

CarlisleBlaydon-on-Tyne

Stockton-on-TeesNewtownabbey

Dublin

Leeds Hull – Head Office, National Distribution Centre

Grimsby

Bradford

Ossett

DoncasterSheffield

Trafford ParkWarrington

Darwen

Ellesmere Port

NottinghamStoke

Leicester

West BromwichCoventry

Northampton

Bury St. Edmunds

WatfordPark Royal Basildon

OrpingtonBrentfordSwansea

CardiffAvonmouth

Plymouth

Hedge EndPortsmouth

Poole

Heathrow

Arco LimitedP.O. Box 21, Waverley Street, Hull HU1 2SJ

www.arco.co.uk

To order online visit www.arco.co.uk

© Arco Limited 2014. All Rights Reserved. Terms and conditions apply. These are available on request or from www.arco.co.uk

Cert no. TT-COC-002290

Over 40 branches nationwideScotland TelephoneAberdeen 01224 249 494 Bellshill 01698 841 697 Glasgow 0141 419 3231 Irvine 01294 315 908 Linlithgow 01506 841 510 Oil & Gas Aberdeen 01224 249 494

North of EnglandBlaydon-on-Tyne 0191 499 1555 Carlisle 01228 591 100 Stockton-on-Tees 01642 617 441

North West EnglandDarwen 01254 778 680 Ellesmere Port 0151 326 2626 Stoke 01782 279 254 Trafford Park 0161 869 5807 Warrington 01925 636 139

Yorkshire and the HumberBradford 01274 732 211 Doncaster 01302 341 195 Grimsby 01472 361 756 Hull 01482 611 611 Leeds 01132 429 531 Ossett 01924 268 800 Sheffield 0114 253 6367

East MidlandsBury St Edmunds 01284 773 030 Leicester 0116 231 8700 Northampton 01604 763 805 Nottingham 0115 938 0456

West MidlandsCoventry 02476 369 780 West Bromwich 0121 500 6060

South of EnglandAvonmouth 0117 982 3751 Basildon 01268 525 847 Brentford 01923 204 141 Heathrow 01753 685 192 Hedge End 023 8027 0000 Orpington 01689 875 411 Park Royal 01923 204 141 Plymouth 01752 751 650 Poole 01202 640 468 Portsmouth 023 9273 4995 Watford 01923 204 141

WalesCardiff 02920 475 810 Swansea 01792 792 390

Northern IrelandNewtownabbey 028 9083 0850

Republic of IrelandDublin (+353) 1 409 5000 www.arcosafety.ie

and Arco Product Assurance Lab