Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Enterprise 500 MKIV High Performance Production Plasma
Cutting System
The Perfect Replacement Plasma Cutting Machine
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Enterprise 500 Plasma Machine with Air Zone table
The Enterprise 500MKIV plasma cutter is designed as a high performance production plasma cutting machine. Designed to run on your existing software, the machine is compatible with all major software packages. Using your existing software can lower your overall investment costs.
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Quick change air balanced torch and remote pause button (option)
The cutting torch can be removed from the machine without tools.
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Light weight aluminum bridge construction allows faster acceleration and deceleration in the corners and higher operating speeds. Bridge is SERVO Motor driven on both ends to eliminate whip.
Aluminum Bridge construction
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Digital SERVO Drive
Our SERVO drive controller is digital for the fastest and most precise speed control available. Motor speed reduction is done thru zero maintenance precision gear boxes. Compare the cutting results of radius parts using this near zero backlash gearbox drive reduction. The drive control is conversational and allows our engineers to connect and diagnose the machine via the Enterprise touch screen computer control. This remote diagnostic capability can reduce the need for expensive service engineer travel to make repairs or adjustments.
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
83” / 2.08 M x 147” / 3.68 M machine footprint
The Enterprise Plasma AIR ZONE* cutting table has five separate cutting zones, each with an exhaust port. Each of our five table cutting zones include computer controlled air intake and exhaust dampers. These dampers direct the exhaust air flow only to the zone directly beneath the cutting torch. This damper system substantially reduces the cutting smoke residue and produces noticeably cleaner cut parts.
Typical cutting results
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
Cleaner cut parts with AIRZONE table
(plasma cut parts flipped for photo) Enterprise 500 key features
High Performance Production Plasma machine design
Energy saving air zone table
5 damper controlled cutting exhaust zones
Cleaner cut parts
Lightweight aluminum bridge construction
Table configurable for side or end loading of sheets
Dual side DIGITAL SERVO driven machine
Drive and guide rail are protected underneath the table
Precision near zero backlash sealed gearbox drive speed reduction
Windows 7 or 8 computer control
Machine diagnostics via internet
All wiring is internal for protection
Torch can be removed without tools
Air float cutting torch balance system with tip-up protection
Enterprise Plasma is designed and built in the USA
June 15, 2015
Standard Sheet Metal Machinery.
1005 North Washington Street
Lisbon Iowa 52253
Mailing address
PO Box 2673
Cedar Rapids, Iowa 52406 USA
Tel: +1 319 408 1111 (GMT – 6)
Fax:+1 319 538 0181
Toll Free (USA) 1 866 935 6325
Specifications are correct on the date of publication and are subject to change without notice.
[email protected] www.standardsmm.com
© Standard Sheet Metal Machinery, Inc. 2008
* Patent pending
STANDARD SHEET METAL MACHINERY Phone: 1 319 408 1111(GMT-6) Fax: 1 319 538 0181 Factory/Showroom: 1005 North Washington Street, Lisbon, Iowa 52253 Mailing Address: PO Box 2673, Cedar Rapids, Iowa 52406