Upload
larry-sherrod
View
219
Download
0
Embed Size (px)
Citation preview
8/14/2019 Entering Codes and Exclusions_SPD
1/38
System Process DocumentEntering Codes and Exclusions
Department
Responsibility/Role
File Name 27761810.docRevision
Document Generation Date 18/01/2010 09:39:00
Date Modified 1/18/2010 09:39:00 AM
Last Changed by
Status
Entering Codes and Exclusions
Trigger:
Concept
Use the Codes and Exclusions page to define the bonus and scrap codes available for this
operation at manufacturing execution time. If you gain something or lose something at this
operation, you assign either a bonus or scrap code to it. At manufacturing execution time, use the
bonus or scrap code available for this operation.
Use the responsibility to indicate who cannot perform this operation. You can also exclude
certain job roles from updating this operation at manufacturing execution time. Responsibilityexclusions identify job roles that cannot perform this operation. For example, you can exclude
users assigned to the Accounting responsibility from updating a grinding machine operation. A
foreman shouldn't be able to use the grinding machine.
You can do this operation for all Shop Floor enabled organizations.
In this topic, you will enter codes and exclusions for a particular operation.
Required Field(s) Comments
Output - Result(s) Comments
Additional Information
Last changed on: 1/18/2010 09:39:00 AM Page 1
8/14/2019 Entering Codes and Exclusions_SPD
2/38
8/14/2019 Entering Codes and Exclusions_SPD
3/38
System Process DocumentEntering Codes and Exclusions
Step Action
2. Click the Manufacturing and Distribution Manager link.
Last changed on: 1/18/2010 09:39:00 AM Page 3
8/14/2019 Entering Codes and Exclusions_SPD
4/38
System Process DocumentEntering Codes and Exclusions
Step Action
3. Click the vertical scrollbar.
Step Action
4. Click the Standard Operations link.
Page 4 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
5/38
System Process DocumentEntering Codes and Exclusions
Step Action
5. Use the Organizations page to select the Shop Floor enabled organization.
Last changed on: 1/18/2010 09:39:00 AM Page 5
8/14/2019 Entering Codes and Exclusions_SPD
6/38
System Process DocumentEntering Codes and Exclusions
Step Action
6. Click the M4 Minneapolis Manufacturing list item.
Step Action
7. Click the OKbutton.
orPress [Alt+O].
Page 6 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
7/38
System Process DocumentEntering Codes and Exclusions
Step Action
8. Use the Standard Operations page to navigate to the Codes and Exclusions page.
Last changed on: 1/18/2010 09:39:00 AM Page 7
8/14/2019 Entering Codes and Exclusions_SPD
8/38
8/14/2019 Entering Codes and Exclusions_SPD
9/38
System Process DocumentEntering Codes and Exclusions
Step Action
11. Click the Codes And Exclusions button.
orPress [Alt+C].
Last changed on: 1/18/2010 09:39:00 AM Page 9
8/14/2019 Entering Codes and Exclusions_SPD
10/38
8/14/2019 Entering Codes and Exclusions_SPD
11/38
System Process DocumentEntering Codes and Exclusions
Step Action
14. Click in the Seq field.
Last changed on: 1/18/2010 09:39:00 AM Page 11
8/14/2019 Entering Codes and Exclusions_SPD
12/38
System Process DocumentEntering Codes and Exclusions
Step Action
15. Enter the desired information into the Seq field. Enter "10".
Step Action
16. Click in the Code field.
Page 12 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
13/38
System Process DocumentEntering Codes and Exclusions
Step Action
17. Enter the desired information into the Code field. Enter "B100".
Last changed on: 1/18/2010 09:39:00 AM Page 13
8/14/2019 Entering Codes and Exclusions_SPD
14/38
System Process DocumentEntering Codes and Exclusions
Step Action
18. Click in the Description field.
Step Action
19. Click in the Seq field.
Page 14 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
15/38
System Process DocumentEntering Codes and Exclusions
Step Action
20. Enter the desired information into the Seq field. Enter "20".
Last changed on: 1/18/2010 09:39:00 AM Page 15
8/14/2019 Entering Codes and Exclusions_SPD
16/38
System Process DocumentEntering Codes and Exclusions
Step Action
21. Click in the Code field.
Step Action
22. Enter the desired information into the Code field. Enter "B200".
Page 16 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
17/38
System Process DocumentEntering Codes and Exclusions
Step Action
23. Click in the Description field.
Last changed on: 1/18/2010 09:39:00 AM Page 17
8/14/2019 Entering Codes and Exclusions_SPD
18/38
System Process DocumentEntering Codes and Exclusions
Step Action
24. Click in the Seq field.
Step Action
25. Enter the desired information into the Seq field. Enter "30".
Page 18 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
19/38
System Process DocumentEntering Codes and Exclusions
Step Action
26. Click in the Code field.
Last changed on: 1/18/2010 09:39:00 AM Page 19
8/14/2019 Entering Codes and Exclusions_SPD
20/38
System Process DocumentEntering Codes and Exclusions
Step Action
27. Enter the desired information into the Code field. Enter "B300".
Step Action
28. Click in the Description field.
Page 20 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
21/38
System Process DocumentEntering Codes and Exclusions
Step Action
29. If you lose something at this operation, you assign a scrap code to it.
Use the Scrap Codes tab to enter the sequences and codes for this operation.
Click the Scrap Codes tab.
Last changed on: 1/18/2010 09:39:00 AM Page 21
8/14/2019 Entering Codes and Exclusions_SPD
22/38
System Process DocumentEntering Codes and Exclusions
Step Action
30. Click in the Seq field.
Page 22 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
23/38
System Process DocumentEntering Codes and Exclusions
Step Action
31. Enter the desired information into the Seq field. Enter "10".
Step Action
32. Click in the Code field.
Last changed on: 1/18/2010 09:39:00 AM Page 23
8/14/2019 Entering Codes and Exclusions_SPD
24/38
System Process DocumentEntering Codes and Exclusions
Step Action
33. Enter the desired information into the Code field. Enter "S100".
Page 24 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
25/38
System Process DocumentEntering Codes and Exclusions
Step Action
34. Click in the Description field.
Step Action
35. Click in the Seq field.
Last changed on: 1/18/2010 09:39:00 AM Page 25
8/14/2019 Entering Codes and Exclusions_SPD
26/38
System Process DocumentEntering Codes and Exclusions
Step Action
36. Enter the desired information into the Seq field. Enter "20".
Page 26 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
27/38
System Process DocumentEntering Codes and Exclusions
Step Action
37. Click in the Code field.
Step Action
38. Enter the desired information into the Code field. Enter "S200".
Last changed on: 1/18/2010 09:39:00 AM Page 27
8/14/2019 Entering Codes and Exclusions_SPD
28/38
System Process DocumentEntering Codes and Exclusions
Step Action
39. Click in the Description field.
Page 28 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
29/38
System Process DocumentEntering Codes and Exclusions
Step Action
40. Click in the Seq field.
Step Action
41. Enter the desired information into the Seq field. Enter "30".
Last changed on: 1/18/2010 09:39:00 AM Page 29
8/14/2019 Entering Codes and Exclusions_SPD
30/38
System Process DocumentEntering Codes and Exclusions
Step Action
42. Click in the Code field.
Page 30 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
31/38
System Process DocumentEntering Codes and Exclusions
Step Action
43. Enter the desired information into the Code field. Enter "S300".
Step Action
44. Click in the Description field.
Last changed on: 1/18/2010 09:39:00 AM Page 31
8/14/2019 Entering Codes and Exclusions_SPD
32/38
System Process DocumentEntering Codes and Exclusions
Step Action
45. Use the Responsibility Exclusions tab to exclude certain job roles from updating
this operation at manufacturing execution time.
Responsibility exclusions identify job roles that cannot perform this operation. You
can use the responsibility to indicate who cannot perform this operation.
Click the Responsibility Exclusions tab.
Page 32 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
33/38
System Process DocumentEntering Codes and Exclusions
Step Action
46. Click in the Responsibility field.
Last changed on: 1/18/2010 09:39:00 AM Page 33
8/14/2019 Entering Codes and Exclusions_SPD
34/38
System Process DocumentEntering Codes and Exclusions
Step Action
47. Enter the desired information into the Responsibility field. Enter "Shop Floor
Manager".
Step Action
48. Click in the Description field.
Page 34 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
35/38
System Process DocumentEntering Codes and Exclusions
Step Action
49. Click in the Responsibility field.
Last changed on: 1/18/2010 09:39:00 AM Page 35
8/14/2019 Entering Codes and Exclusions_SPD
36/38
System Process DocumentEntering Codes and Exclusions
Step Action
50. Enter the desired information into the Responsibility field. Enter "Shop Floor
Workbench".
Step Action
51. Click in the Description field.
Page 36 Last changed on: 1/18/2010 09:39:00 AM
8/14/2019 Entering Codes and Exclusions_SPD
37/38
System Process DocumentEntering Codes and Exclusions
Step Action
52. Click the Save button.
Last changed on: 1/18/2010 09:39:00 AM Page 37
8/14/2019 Entering Codes and Exclusions_SPD
38/38
System Process DocumentEntering Codes and Exclusions
Step Action
53. You have completed the Entering Codes and Exclusions procedure.
End of Procedure.