1
BYU PRISM Group APMonitor.com prism.groups.et.byu.net Enhance Laboratory Learning with Virtual Systems Dr. John D. Hedengren Department of Chemical Engineering [email protected] 350 Clyde Building Brigham Young University Provo, UT 84602 The APMonitor is modeling platform for dynamic systems. It is coupled with large-scale nonlinear programming solvers for data reconciliation, real-time optimization, dynamic simulation, and nonlinear predictive control. It is available as a web service through MATLAB, Python, or with a browser interface at http://apmonitor.com. 5.5 6 6.5 7 7.5 8 Creativity Kinetics UO Lab 2 (old) Seminar Materials Intro to CHE Separations UO Lab 1 Thermodynamics Resevior Eng Process Control Career Skills UO Lab 2 (new) Environ Eng Energy Semiconductors Fluids Plant Design Nuclear Heat/Mass Transfer Fund of CHE Computing Mol Modeling Amount Learned 2− + ↔ ℎ 3− Isothermal Method (15-20 Hours to Collect Sufficient Data) Design of Experiments (1-2 Hours to Collect Sufficient Data)

Enhance Laboratory Learning with Virtual Systems

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

BYU PRISM Group APMonitor.com prism.groups.et.byu.net

Enhance Laboratory Learning with Virtual Systems

Dr. John D. Hedengren Department of Chemical Engineering [email protected]

350 Clyde Building Brigham Young University Provo, UT 84602

The APMonitor is modeling platform for dynamic systems. It is coupled with large-scale nonlinear programming solvers for data reconciliation, real-time optimization, dynamic simulation, and nonlinear predictive control. It is available as a web service through MATLAB, Python, or with a browser interface at http://apmonitor.com.

5.5 6 6.5 7 7.5 8

CreativityKinetics

UO Lab 2 (old)Seminar

MaterialsIntro to CHESeparations

UO Lab 1Thermodynamics

Resevior EngProcess Control

Career SkillsUO Lab 2 (new)

Environ EngEnergy

SemiconductorsFluids

Plant DesignNuclear

Heat/Mass TransferFund of CHE

ComputingMol Modeling

Amount Learned

𝑃ℎ2− + 𝑂𝐻− ↔ 𝑃ℎ𝑂𝐻3−

Isothermal Method (15-20 Hours to Collect Sufficient Data)

Design of Experiments (1-2 Hours to Collect Sufficient Data)