Aqeel Ahmed Contact #: +92311-2706803Email ID: engraqeel33@yahoo.comAddress: 24/14, Sector 5-D, North Karachi, Karachi.

ObjectiveTo be able to work and grow professionally as a Chemical Engineer in a stable organization where I can demonstrate my expertise in Chemical products, as well as contribute to the company’s goals and ambitions.

EducationB.E – Chemical Engineering 2010 – 2013 Karachi University , Karachi

1st Division

Intermediate – Pre-Engineering 2007 – 2009 SM Science College, Karachi

1st Division

Matriculation – Science group 2005 – 2006 B.W.P School, Karachi

A Grade

ExperienceProduction Engr. – Technical Nov 2014 – PresentWell Lubricant, Karachi Currently Functioning in the Blending Processing Unit, undergoing various job responsibilities that

include:

Leads and oversees the duties carried out by staff within blending and filling section performing supervisory functions at the level established by Management.

Ensure that staff members work according set standards and procedures, the work place is kept clean and tidy and safety procedures are adhered to.

Assist the lube and Grease plant Department Manager in organizing blending and filling schedules. Oversees the daily dip taking of base oil and additives storage tanks by using the calibration record

for each tank to check the volume and temperature. Calculate the correct quantity to ensure that there is sufficient material available to meet

requirements. Prepare the base oil and additives stock statement, showing the stock of bulk materials in each tank

and type of product. Submits statement weekly to the Department Manager. Gathers daily production details and prepares blending reports, monthly stock statements and other

reports as required, such as consumption of each ingredient. Assists the Lube and Grease plant dept Manager in developing existing manual production reports,

not covered by the information held in the system Determine ways to automate the manual reports through liaison with the I.T Department. Supervises and oversees the withdrawal of base oils, additives and empty packages from storage

tanks and Lubricant stores. Arrange and oversees the receipt, sampling and discharge of bulk liquid additives containers (BLC’s)

and ensures that delivery discharge is into the correct tanks. Check the quality and quantity of goods received. Ensures that correct formulation is used for blending of required grades, in accordance with set

formulas, by comparing with the Quality control Laboratory sample. Supervises the withdrawal of samples of finished products from the kettles, and send to the

Laboratory for testing. Arrange any necessary adjustment to be made such as further blending. Arrange the re-blending of

slow or non- moving lube grades by coordinating with the laboratory and Quality Control.

Plans manpower distribution in Lube blending and filling section accordingly to daily production schedules and proper allocation to each section at the start of shift each day.

Coordinates with planning Engineer to prepare and issue daily filling program in accordance with weekly production program provided by Planning Engineer.

Oversees duties of the Lube Supervisor-Filling Senior Technicians, Technicians to ensure that the ISO 9001-2008 quality control procedures are adhered to all times.

Management Trainee – Quality/Technical Mar– Oct 2013/14Fluid Technology International Pvt.Ltd., Karachi

o RESPONSIBILTIES.

Inspection of RO plants and checking its parameters. Monitoring of RO Plant. Cleaning (alkaline and acidic) of Membranes of RO plants. Settling of Membranes according to their weights when required. Water Testing via Titration. Technical Report writing on daily basis. Daily communication with managements about progress of plants. Working on sales weekly.

Good at in following water testing of RO plants, Boilers, Cooling towers, Engine, and Raw Water.

Calcium and Magnesium Hardness. Carbonates, Bicarbonates, & Caustic Alkalinity. Sulfite and Phosphate. Chlorides & Iron. Total and Free Chlorine. High and Low Range Silica. SDI (Silt Density index) Test.

FEROZE 1888 TEXTILE:

SUPERVISOR OF FOLLOWING PLANTS:

o R.O PLANTo SOFTNER PLANTo DEMINEARLIZATION PLANT

Project Engineer – Final Year Project Jan – Dec, 2013Karachi University , Karachi

Production of liquid Oxygen and liquid Nitrogen by Cryogenic Distillation Process.

Internee - Summer Internship Program 1stDec – 30th

Dec,2012PAKISTAN STEEL MILLS, Karachio Completed a 4-week Summer Internship Program at the Cold Rolling Mill (CRM) Unit, Coke Oven

Battery Plant (COBP), Oxygen Plant and Process laboratory.SkillsTechnical Effective knowledge and practical exposure of Blending Process technicalities, parameters and Testing. Proficient in the use of Microsoft Office (Word, Excel, PowerPoint) with effective Documentation,

Reports Management and Presentation making skills.

Management Able to absorb/understand obstacles and come up with strategic/beneficial solutions, as per my

knowledge on Chemical Engineering and decision making skills. Leadership qualities with project and team management skills.

Communication

Excellent in oral and written communication. Good negotiation skills with both senior & junior officials. Convincing Presentation skills polished through experiences of courses, workshops & presentations.

Highlight Membership Active Member Of Chemical Engineers Students Society (CHESS).

Personal InfoDate of Birth 05TH August, 1989 NIC # 41304-6474781-9Father Name Shakeel AhmedNationality PakistaniMarital Status Unmarried