ASPHALT & CONCRETE EQUIPMENT

CONCRETE BATCHING PLANTCONCRETE CONVEYOR

Engineering Excellence

Through Innovation

AN ISO 9001CERTIFIED COMPANY

3Fully automatic Stationary Concrete Plants are available upto 60 m /hr capacity. These plants are highly advanced and durable.

Concrete Batching Plant

l Outstanding Homogenity In Short Timel Low Wear Designl Easy & Low Maintenance

Mixer Features

3

u Plants available in 30 / 45 / 60 m /hr capacity

u Equipped with Pan / Twin Shaft / Planetary Mixer

u Inline storage of Aggregate & Sand

u Aggregate & Sand weighing conveyor suspended on load cells

u Inclined conveyor for feeding of Aggregate & Sand into mixer

u Independent weighing system for Cement, Water & Additive

u Operation through Fully Automatic Electronic Control Panel

u Manufacturing is done with advanced, internationally recognised

techniques at our State of the art facilities

u Global presence with prompt after sales support

u Dedicated R & D Department

Features

Twin Shaft Mixer

Plan

etar

y M

ixer

Higher Capacity Plants are offered on specific request.

Technical Characteristics : SCP 30 / 45 / 60

Weighing Accuracy : Conforming to IS & DIN Standards 2% for Aggregate & 1% for Water & Cement

MODEL SCP 30 SCP 45 SCP 60 3Output (m /hr) 30 45 60

Type of Sand / Aggregate Bin In Line In Line In Line

No. of Bins 4 4 4 3 3 3Bin Capacity (Each) 8 m 10 m 15 m

Transfer Belt Width 500 mm 550 mm 650 mm

Type of Mixer Pan Twin Shaft Twin Shaft

Cement / Filler Weighing System ü ü ü

Water Weighing System ü ü ü

Admixture Weighing System ü ü ü

Air Compressor ü ü ü

Controls SCADA Enabled SCADA Enabled SCADA Enabled

Auto + Manual Mode ü ü ü

Inventory Management ü ü ü

Discharge Height 4.1 mtr 4.1 mtr 4.1 mtr

u PLC Based Controlu SCADA Interface u Automatic & Manual

Operationu Auto Correction of

Wateru Inventory Control

Management

Controls l Cement / Fly Ash

storage & conveying system up to 100 MT capacity

l Radial Conveyor for feeding of aggregate into the bins

Optionals

Technical Characteristics : CCP 30

Model

Output (m³/hr)

Type of Mixer

Mixer Capacity per Batch (m³)

No. of Aggregate and Sand Bins

Total Storage Capacity of Bins (m³)

FeaturesCompact design with main unit mounted on single chassisEquipped with Pan MixerSplit bins for storage of Aggregate and SandCement / Fly Ash storage & conveying system Aggregate / Sand weighing & charging conveyor suspended on load cellsIndependent digital weighing system for cement, water and additiveFully automatic control panel Air conditioned control cabinManufactured at state of the art facility24 x 7 Product support

Water Weighing Hopper Capacity (m³)

Cement Weighing Hopper Capacity (m³)

Discharge Height from Ground Level (m)

Total Connected Load (hp)

Cement Feeding Hopper (kg)

CCP 30

30

Pan

0.5

4

20

0.30

0.35

4.1

72

2000

Compact Concrete Batching Plant3Highly compact and fully automatic Concrete Plant is available in 30 m /hr capacity. Plant could be erected

and dismantled in a day.

Model MCP 36 MCP 45 3Output (m /hr) 36 45

Type of Mixer Pan Pan

Sand / Aggregate Bin 4 Nos. 4 Nos.3 3Bin Capacity (each) 4.5 m 4.5 m

Water Tank In built In built

Water Pump 1 No. 1 No.

Controls Fully Automatic Fully Automatic

Concrete Discharge Through Conveyor Belt Through Conveyor Belt

Approx. Weight 14000 Kg 15000 Kg

Technical Characteristics : MCP 36 / 45

3Container type, fully integrated, automatic Concrete Plants are available in 36 & 45 m /hr capacity. With design, mixer and controls from Europe, these plants are available both in stationary and mobile versions.

Containerized Concrete Plant

l Wheel & Axle for Mobilityl Cement Silo with Screw Conveyor and Accessoriesl Cement Weighing System on top of Mixerl Dosing system for Liquid Additives

Optionals

u Compact design from

Europe

u European Mixer &

Controls

u Quick Installation

u Low Maintenance Cost

u One Trailer Load

u Global Supplies & Support

Features

3These are highly Portable Concrete Plants & is available in 20 m /hr capacity. Extremely useful for contractors on the move.

Portable Concrete Plant

l Wheel & Axle for Mobilityl Cement Silo with Screw Conveyor and Accessories

Optionals

u Compact design

u Cost Efficient

u Quick Installation

u Low Maintenance Cost

u One Trailer Load

u Global Supplies & Support

Features

Technical Characteristics : PCP 20Model PCP 20

3Output (m /hr) 20

Type Of Mixer Pan

Mixer Motor Power 30 Hp

Sand/Aggregate Hopper (Split Bin) 4 Nos3Hopper Capacity (Each) 5 m

Water Pump 1 No

Additive Jar 1 No

Additive Pump 1 No

Controls Fully Automatic

Weighing System Electronic Digital

Approx. Weight 11000 Kg

Cement Hopper with

Screw Conveyor

Load Out Conveyor 1 Set

Power Requirement 75 KVA

1 Set

u Compact design

u Cost Efficient

u Low Maintenance

u One Trailer Load

u Top Quality Components

u Global Supplies & Support

Features

Model MCP 153Output (m /hr) 15

Type of Mixer Pan

Sand / Aggregate Hopper 4 Nos.3Hopper Capacity (each) 2.5 m

No. of Wheels 6 Nos.

Water & Additive Tank In built

Water & Additive Pump 1 No. Each

Cement Hopper with Screw Conveyor Included

Controls Fully Automatic

Concrete Discharge Through Conveyor Belt

Approx. Weight 11000 Kg

Technical Characteristics : MCP 15

Mobile Concrete Plant3Compact design and fully automatic Mobile Concrete Plant is available in 15 m /hr capacity. Ease of

erection and operation is the key feature of this plant.

Concrete ConveyorTransit Mixer Mounted Concrete Conveyor helps you place your concrete right where you want it. Manufactured under European Collaboration, these machines are an Ideal Solution for job sites of Short to Medium distances. Economy, flexibility, ease of use, low maintenance, high return on investment and convenience are just some advantages that have made these machines globally popular.

Due to SPEEDCRAFTS Policy of continuous improvement / development, the technical data mentioned in this entire catalogue is not binding and subject to change without notice.

www.speedcrafts.comwww.speedcrafts.net

MARKETING HEADQUARTERS :

'Unitech Business Zone', Tower C, Unit No. 804

Nirvana Country, Sector 50, Gurgaon - 122 001

(Delhi NCR), INDIA

TEL : +91-124-2219968

FAX : +91-124-2219928

CORPORATE OFFICE :

‘Layak Bhawan'

Boring Canal Road

Patna - 800 001, Bihar, INDIA

TEL : +91-612-2534514 / 2520914

FAX : +91-612-2527029

SPEEDCRAFTS LIMITED CIN : U34100BR1971PLC000904

EMAIL : info@speedcrafts.com | info@speedcrafts.net

Features

Model PR 12

Conveyor Length 12.2 mtr

Approximate Weight 1.6 Ton

Belt Width 360 mm3Discharge Rate 70 m /hr

Discharge Height 7.5 mtr

Motor 160 cc

Controls Hydraulic

Technical Characteristics : PR 12