dominion-global.com Innovation to improve efficiency ENGINEERING & DESIGN For more than 100 years Dominion, through names such as KARRENA or CTP has been devel- oping innovative solutions to improve the efficiency of our customers’ processes. Our design and engineering teams combine this tradition and experience with the use of the new- est technologies with one main target: continuous improvement. We work together with our customers both for new projects, revamps or maintenance to develop the most suitable design adapted to the process conditions. The direct contact between our customers, sales, project management and design teams contri- butes to finding the right solution for each situa- tion. Our design capabilities extend from the refractory linings, including thermal calculations, 2D and 3D drawings etc. and the steel frameworks and an- choring supporting them to tall structures such as chimneys and towers. Our finite elements calculation software allows static and dynamic calculation both from the structural and thermal point of view. Earthquake simulations is one of the many features of our engineering capabilities. By offering turnkey projects, including design, sup- ply and erection, we can balance the key factors to achieve the best result from the point of view of cost, durability, work safety and project duration. Not being a refractory manufacturer allows us to choose the best materials available, both from the technical and economical point of view, with- out the constraints of having to use our own materials. Working together with our energy efficiency en- gineers, we can help our clients to achieve signifi- cant savings in their energy consumption. Our experience on the field of design and engineering covers al the basic and process industries such as chemical, petrochemical, power genera- tion, waste to energy, steel, glass, cement, lime or non-ferrous metallurgy. TECHNOLOGIES - 2D design using MEDUSA, AUTOCAD, Advance Steel and Advance Concrete. - 3D design using SOLIDWORKS or CREO. - Thermal calculations using Simu-Therm. - Finite elements static and dynamic thermal and structural calculations using Straus7, ANSYS, RFEM or SAP2000. - Complete design and engineering package including: detail engineering (general arrange- ments and details, component drawings, material datasheet, bill of materials), thermal calculations, including thermal expansion, static calculations if needed, installation instructions, dry-out and commissioning instructions, maintenance instructions. Finding the right solution ENGINEERING & DESIGN / Technology [email protected]

Engineering & design - BEROA Deutschland · ENGINEERING & DESIGN For more than 100 years Dominion, through names such as KARRENA or CTP has been devel- ... - Complete design and engineering

Download PDF Report

Upload
ngoanh
View
218
Download
4

Embed Size (px)

Citation preview

Page 1: Engineering & design - BEROA Deutschland · ENGINEERING & DESIGN For more than 100 years Dominion, through names such as KARRENA or CTP has been devel- ... - Complete design and engineering

dominion-global.com

Innovation to improve efficiency

ENGINEERING & DESIGN

For more than 100 years Dominion, through names such as KARRENA or CTP has been devel-oping innovative solutions to improve the efficien-cy of our customers’ processes.

Our design and engineering teams combine this tradition and experience with the use of the new-est technologies with one main target: continuous improvement.

We work together with our customers both for new projects, revamps or maintenance to develop the most suitable design adapted to the process conditions.

The direct contact between our customers, sales, project management and design teams contri-butes to finding the right solution for each situa-tion.Our design capabilities extend from the refractory linings, including thermal calculations, 2D and 3D drawings etc. and the steel frameworks and an-choring supporting them to tall structures such as chimneys and towers.

Our finite elements calculation software allows static and dynamic calculation both from the structural and thermal point of view. Earthquake simulations is one of the many features of our en-gineering capabilities.

By offering turnkey projects, including design, sup-ply and erection, we can balance the key factors to achieve the best result from the point of view of cost, durability, work safety and project duration.Not being a refractory manufacturer allows us to choose the best materials available, both from the technical and economical point of view, with-out the constraints of having to use our own ma-terials.

Working together with our energy efficiency en-gineers, we can help our clients to achieve signifi-cant savings in their energy consumption.

Our experience on the field of design and engi-neering covers al the basic and process industries such as chemical, petrochemical, power genera-tion, waste to energy, steel, glass, cement, lime or non-ferrous metallurgy.

TECHNOLOGIES

- 2D design using MEDUSA, AUTOCAD, Advance Steel and Advance Concrete.

- 3D design using SOLIDWORKS or CREO.

- Thermal calculations using Simu-Therm.

- Finite elements static and dynamic thermal and structural calculations using Straus7, ANSYS, RFEM or SAP2000.

- Complete design and engineering package in-cluding: detail engineering (general arrange-ments and details, component drawings, material datasheet, bill of materials), thermal calculations, including thermal expansion, static calculations if needed, installation instructions, dry-out and commissioning instructions, maintenance instruc-tions.

Finding the right solution

ENGINEERING & DESIGN /Technology

[email protected]