Upload
others
View
24
Download
0
Embed Size (px)
Citation preview
References
Harmonized gas compressor control systemsSaudi International Petrochemical Co. (SIPCHEM), Al-Jubail, Saudi Arabia
Marshalling cabinets, system cabinets and machine monitoring cabinets for three machine trains for the compression of natural gas, CO2 and CO
TRICON PLCs (TMR) for sequence / performance / anti-surge control Total 600 I / O, 4000 tags Full dynamic simulation, including – for CO compressor – the simulation of 4 anti-surge control loops and 4 performance control loops
BOP (Balance of Plant) to DCS interface design Dubai Electricity & Water Authority (DEWA), Station ‘H’, Phase II, Aweer, UAE
Fully hardwired interfacing for 120 subsystems and 300 panels / cabinets Systems covered include gas compressors, fuel gas skids, fuel oil skids, HV / MV / LV switchgears
Database supported cable engineering (INTOOLS) Total 5000 I / O, 1300 homerun cables
Retrofit of rotating machinery instrumentation and controlsShell refinery, Pernis / Rotterdam, Netherlands
Retrofit for two turbine driven air compressors and one turbo generator set Control systems based on SIMATIC S7-400HF PLCs Integration of existing speed controllers and overspeed protection systems Turnkey responsibility included pneumatic instrument upgrade and site installation
Engineering services related to plant control / safety / monitoring systemsMiddle East
DCS / ESD for SABIC polypropylene catalysator plant, Riyadh, Saudi Arabia DCS for ELIXIER air separation plant, Ruwais, United Arab Emirates ICS for ADCO gas compressor stations, Bab / Habshan, United Arab Emirates MMS for petrochemical plant, Al-Jubail, Saudi Arabia
See our website for further references.
Rotating Machinery Instrumentation and ControlsPlant Systems – Package Unit IntegrationTurnkey Controls Retrofit
Why AviComp? Strong machinery and systems knowledge Proven track record in implementing “heavy spec” projects Efficient anti-surge controls for variable composition streams Advanced sequencing of multiple compressors feeding the same process Experience with new machinery as well as retrofit installations International support including local FAT capability Independent
AC
I 16-
03
Foto
s: S
hutt
erst
ock/
Wla
d74/
Sol
niko
v/V
ladf
oto
www.avicomp.com
Engineering Contracting for Compressor and Turbine Controls
AviComp Engineering AG Mittelstrasse 24, CH-2560 Nidau, Switzerland Phone +41 32 3329250, Fax +41 32 3329252
AviComp Controls GmbH Ostwaldstrasse 4, 04329 Leipzig, Germany Phone +49 341 217870, Fax +49 341 21787 2701
AviComp (Russ) OOO Bolshoy Znamenskiy per., 2, str. 3.; 119019 Moscow, Russia Phone/Fax +7 495 2520044
AviComp Belarus Surganove Str. 57/b – 154, 220100 Minsk, Belarus Phone/Fax +375 17 990029
AviComp d.o.o. Beograd Zvec ˇ anska 38, 11000 Belgrade, Republic of Serbia Phone/Fax +381 11 3692048
AviComp Houston 1900 West Loop South, Suite 1185, Houston TX 77027 Phone +1 832 3841239
AviComp Singapore Pte Ltd 11 Woodlands Close, #09–30 Woodlands 11, Singapore 737853 Phone +65 6521 68111, Fax +65 6612 7401
Solution Partner
Rotating Machinery Instrumentation and ControlsAviComp acts as EPIC contractor for rotating machinery electrical, instrumentation and controls projects. Our scope covers: PLC-based control systems, fail-safe and redundant as required Integration and startup of dedicated controllers Machine monitoring systems, fire and gas detection MCC cabinets, push button stations, cabling systems, junction boxes Instruments and control valves
Corporate Profile Capabilities
AviComp is a leading independent engineering contractor for rotating machinery controls and a provider of superior engineering consultancy services. Key competences include: Rotating Machinery Controls Service and Commissioning Turnkey Revamp and Optimization
We at AviComp have vast application engineering experience and in-depth machinery knowledge. Our engineers are well familiar with the requirements of relevant industry standards and operating companies’ engineering standards.
AviComp is a dynamic company specialized in advanced solutions for compressor and turbine controls. AviComp’s control capabilities include: AviComp TurboControls – Control systems for radial and axial compressors AviComp RecipControls – Control systems for reciprocating type compressors AviComp TurbineControls – Control systems for steam turbines and gas turbines Compressor Safety Controls Master Controls
AviComp has implemented a quality management system that complies with the requirements of DIN EN ISO 9001:2008, as well as an environmental management system in line with the international standard DIN EN ISO 14001. We have also estab-lished a management system for health, safety, and environmental protection accord-ing to the SCC (Safety Checklist for Contractors) regulations.
Turnkey Controls RetrofitAviComp offers operating companies single responsibility for the entire instrumentation, controls, electrical and mechanical scope of compressor and turbine retrofits: Conceptual engineering Migrate controls / monitoring functionalities as per client’s project strategy Upgrade from pneumatic to electronic Upgrade actuators
Plant Systems – Package Unit IntegrationAviComp offers the following project support services to general contractors: Specification of DCS, ESD and MMS (Machine Monitoring Systems) Integration design for compressors and miscellaneous
mechanical / electrical systems Logic design Engineering and supply of system cabinets and marshalling cabinets Database supported cable engineering (INTOOLS)
AviComp has successfully supplied rotating machinery controls for projects all over the world. Operating companies, machinery manufacturers and EPC contractors alike trust in AviComp’s unique capabilities. Please ask for our references which include applications in a variety of industries: Oil & Gas Petrochemical & Chemical Industrial Gases Metallurgy Power Generation Refinery
Applications
More than 1 300 systems engineered, supplied and commissioned!
Courtesy Siemens Process Compression, Duisburg
Rotating Machinery Instrumentation and ControlsAviComp acts as EPIC contractor for rotating machinery electrical, instrumentation and controls projects. Our scope covers: PLC-based control systems, fail-safe and redundant as required Integration and startup of dedicated controllers Machine monitoring systems, fire and gas detection MCC cabinets, push button stations, cabling systems, junction boxes Instruments and control valves
Corporate Profile Capabilities
AviComp is a leading independent engineering contractor for rotating machinery controls and a provider of superior engineering consultancy services. Key competences include: Rotating Machinery Controls Service and Commissioning Turnkey Revamp and Optimization
We at AviComp have vast application engineering experience and in-depth machinery knowledge. Our engineers are well familiar with the requirements of relevant industry standards and operating companies’ engineering standards.
AviComp is a dynamic company specialized in advanced solutions for compressor and turbine controls. AviComp’s control capabilities include: AviComp TurboControls – Control systems for radial and axial compressors AviComp RecipControls – Control systems for reciprocating type compressors AviComp TurbineControls – Control systems for steam turbines and gas turbines Compressor Safety Controls Master Controls
AviComp has implemented a quality management system that complies with the requirements of DIN EN ISO 9001:2008, as well as an environmental management system in line with the international standard DIN EN ISO 14001. We have also estab-lished a management system for health, safety, and environmental protection accord-ing to the SCC (Safety Checklist for Contractors) regulations.
Turnkey Controls RetrofitAviComp offers operating companies single responsibility for the entire instrumentation, controls, electrical and mechanical scope of compressor and turbine retrofits: Conceptual engineering Migrate controls / monitoring functionalities as per client’s project strategy Upgrade from pneumatic to electronic Upgrade actuators
Plant Systems – Package Unit IntegrationAviComp offers the following project support services to general contractors: Specification of DCS, ESD and MMS (Machine Monitoring Systems) Integration design for compressors and miscellaneous
mechanical / electrical systems Logic design Engineering and supply of system cabinets and marshalling cabinets Database supported cable engineering (INTOOLS)
AviComp has successfully supplied rotating machinery controls for projects all over the world. Operating companies, machinery manufacturers and EPC contractors alike trust in AviComp’s unique capabilities. Please ask for our references which include applications in a variety of industries: Oil & Gas Petrochemical & Chemical Industrial Gases Metallurgy Power Generation Refinery
Applications
More than 1 300 systems engineered, supplied and commissioned!
Courtesy Siemens Process Compression, Duisburg
Rotating Machinery Instrumentation and ControlsAviComp acts as EPIC contractor for rotating machinery electrical, instrumentation and controls projects. Our scope covers: PLC-based control systems, fail-safe and redundant as required Integration and startup of dedicated controllers Machine monitoring systems, fire and gas detection MCC cabinets, push button stations, cabling systems, junction boxes Instruments and control valves
Corporate Profile Capabilities
AviComp is a leading independent engineering contractor for rotating machinery controls and a provider of superior engineering consultancy services. Key competences include: Rotating Machinery Controls Service and Commissioning Turnkey Revamp and Optimization
We at AviComp have vast application engineering experience and in-depth machinery knowledge. Our engineers are well familiar with the requirements of relevant industry standards and operating companies’ engineering standards.
AviComp is a dynamic company specialized in advanced solutions for compressor and turbine controls. AviComp’s control capabilities include: AviComp TurboControls – Control systems for radial and axial compressors AviComp RecipControls – Control systems for reciprocating type compressors AviComp TurbineControls – Control systems for steam turbines and gas turbines Compressor Safety Controls Master Controls
AviComp has implemented a quality management system that complies with the requirements of DIN EN ISO 9001:2008, as well as an environmental management system in line with the international standard DIN EN ISO 14001. We have also estab-lished a management system for health, safety, and environmental protection accord-ing to the SCC (Safety Checklist for Contractors) regulations.
Turnkey Controls RetrofitAviComp offers operating companies single responsibility for the entire instrumentation, controls, electrical and mechanical scope of compressor and turbine retrofits: Conceptual engineering Migrate controls / monitoring functionalities as per client’s project strategy Upgrade from pneumatic to electronic Upgrade actuators
Plant Systems – Package Unit IntegrationAviComp offers the following project support services to general contractors: Specification of DCS, ESD and MMS (Machine Monitoring Systems) Integration design for compressors and miscellaneous
mechanical / electrical systems Logic design Engineering and supply of system cabinets and marshalling cabinets Database supported cable engineering (INTOOLS)
AviComp has successfully supplied rotating machinery controls for projects all over the world. Operating companies, machinery manufacturers and EPC contractors alike trust in AviComp’s unique capabilities. Please ask for our references which include applications in a variety of industries: Oil & Gas Petrochemical & Chemical Industrial Gases Metallurgy Power Generation Refinery
Applications
More than 1 300 systems engineered, supplied and commissioned!
Courtesy Siemens Process Compression, Duisburg
References
Harmonized gas compressor control systemsSaudi International Petrochemical Co. (SIPCHEM), Al-Jubail, Saudi Arabia
Marshalling cabinets, system cabinets and machine monitoring cabinets for three machine trains for the compression of natural gas, CO2 and CO
TRICON PLCs (TMR) for sequence / performance / anti-surge control Total 600 I / O, 4000 tags Full dynamic simulation, including – for CO compressor – the simulation of 4 anti-surge control loops and 4 performance control loops
BOP (Balance of Plant) to DCS interface design Dubai Electricity & Water Authority (DEWA), Station ‘H’, Phase II, Aweer, UAE
Fully hardwired interfacing for 120 subsystems and 300 panels / cabinets Systems covered include gas compressors, fuel gas skids, fuel oil skids, HV / MV / LV switchgears
Database supported cable engineering (INTOOLS) Total 5000 I / O, 1300 homerun cables
Retrofit of rotating machinery instrumentation and controlsShell refinery, Pernis / Rotterdam, Netherlands
Retrofit for two turbine driven air compressors and one turbo generator set Control systems based on SIMATIC S7-400HF PLCs Integration of existing speed controllers and overspeed protection systems Turnkey responsibility included pneumatic instrument upgrade and site installation
Engineering services related to plant control / safety / monitoring systemsMiddle East
DCS / ESD for SABIC polypropylene catalysator plant, Riyadh, Saudi Arabia DCS for ELIXIER air separation plant, Ruwais, United Arab Emirates ICS for ADCO gas compressor stations, Bab / Habshan, United Arab Emirates MMS for petrochemical plant, Al-Jubail, Saudi Arabia
See our website for further references.
Rotating Machinery Instrumentation and ControlsPlant Systems – Package Unit IntegrationTurnkey Controls Retrofit
Why AviComp? Strong machinery and systems knowledge Proven track record in implementing “heavy spec” projects Efficient anti-surge controls for variable composition streams Advanced sequencing of multiple compressors feeding the same process Experience with new machinery as well as retrofit installations International support including local FAT capability Independent
AC
I 16-
03
Foto
s: S
hutt
erst
ock/
Wla
d74/
Sol
niko
v/V
ladf
oto
www.avicomp.com
Engineering Contracting for Compressor and Turbine Controls
AviComp Engineering AG Mittelstrasse 24, CH-2560 Nidau, Switzerland Phone +41 32 3329250, Fax +41 32 3329252
AviComp Controls GmbH Ostwaldstrasse 4, 04329 Leipzig, Germany Phone +49 341 217870, Fax +49 341 21787 2701
AviComp (Russ) OOO Bolshoy Znamenskiy per., 2, str. 3.; 119019 Moscow, Russia Phone/Fax +7 495 2520044
AviComp Belarus Surganove Str. 57/b – 154, 220100 Minsk, Belarus Phone/Fax +375 17 990029
AviComp d.o.o. Beograd Zvec ˇ anska 38, 11000 Belgrade, Republic of Serbia Phone/Fax +381 11 3692048
AviComp Houston 1900 West Loop South, Suite 1185, Houston TX 77027 Phone +1 832 3841239
AviComp Singapore Pte Ltd 11 Woodlands Close, #09–30 Woodlands 11, Singapore 737853 Phone +65 6521 68111, Fax +65 6612 7401
Solution Partner
References
Harmonized gas compressor control systemsSaudi International Petrochemical Co. (SIPCHEM), Al-Jubail, Saudi Arabia
Marshalling cabinets, system cabinets and machine monitoring cabinets for three machine trains for the compression of natural gas, CO2 and CO
TRICON PLCs (TMR) for sequence / performance / anti-surge control Total 600 I / O, 4000 tags Full dynamic simulation, including – for CO compressor – the simulation of 4 anti-surge control loops and 4 performance control loops
BOP (Balance of Plant) to DCS interface design Dubai Electricity & Water Authority (DEWA), Station ‘H’, Phase II, Aweer, UAE
Fully hardwired interfacing for 120 subsystems and 300 panels / cabinets Systems covered include gas compressors, fuel gas skids, fuel oil skids, HV / MV / LV switchgears
Database supported cable engineering (INTOOLS) Total 5000 I / O, 1300 homerun cables
Retrofit of rotating machinery instrumentation and controlsShell refinery, Pernis / Rotterdam, Netherlands
Retrofit for two turbine driven air compressors and one turbo generator set Control systems based on SIMATIC S7-400HF PLCs Integration of existing speed controllers and overspeed protection systems Turnkey responsibility included pneumatic instrument upgrade and site installation
Engineering services related to plant control / safety / monitoring systemsMiddle East
DCS / ESD for SABIC polypropylene catalysator plant, Riyadh, Saudi Arabia DCS for ELIXIER air separation plant, Ruwais, United Arab Emirates ICS for ADCO gas compressor stations, Bab / Habshan, United Arab Emirates MMS for petrochemical plant, Al-Jubail, Saudi Arabia
See our website for further references.
Rotating Machinery Instrumentation and ControlsPlant Systems – Package Unit IntegrationTurnkey Controls Retrofit
Why AviComp? Strong machinery and systems knowledge Proven track record in implementing “heavy spec” projects Efficient anti-surge controls for variable composition streams Advanced sequencing of multiple compressors feeding the same process Experience with new machinery as well as retrofit installations International support including local FAT capability Independent
AC
I 16-
03
Foto
s: S
hutt
erst
ock/
Wla
d74/
Sol
niko
v/V
ladf
oto
www.avicomp.com
Engineering Contracting for Compressor and Turbine Controls
AviComp Engineering AG Mittelstrasse 24, CH-2560 Nidau, Switzerland Phone +41 32 3329250, Fax +41 32 3329252
AviComp Controls GmbH Ostwaldstrasse 4, 04329 Leipzig, Germany Phone +49 341 217870, Fax +49 341 21787 2701
AviComp (Russ) OOO Bolshoy Znamenskiy per., 2, str. 3.; 119019 Moscow, Russia Phone/Fax +7 495 2520044
AviComp Belarus Surganove Str. 57/b – 154, 220100 Minsk, Belarus Phone/Fax +375 17 990029
AviComp d.o.o. Beograd Zvec ˇ anska 38, 11000 Belgrade, Republic of Serbia Phone/Fax +381 11 3692048
AviComp Houston 1900 West Loop South, Suite 1185, Houston TX 77027 Phone +1 832 3841239
AviComp Singapore Pte Ltd 11 Woodlands Close, #09–30 Woodlands 11, Singapore 737853 Phone +65 6521 68111, Fax +65 6612 7401
Solution Partner