Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Engineered Wood Flooring - WPC Flooring
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
27
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
Choosing a flooring material with sufficient hardness and
strength is essential to prevent scratching when you drop
something on it.
In daily life, it is inevitable that floors get stained over time. A key
point to keep floors clean for a long time is to choose a flooring
material with excellent stain-proof and wipeable features.
Excellent stain resistant Surface sealed WPC floors are stain and water resistant, durable and easy to maintain.
Besides being stain and scratch-resistant,
Daiken WPC flooring has a slip resistance
property so as to ensure safety of the kids,
elderly and pets.
Excellent stain-, scratch- and slip-resistant floor surface are ideal for your pets.
A wide range of Engineered Wood Flooring provides a beautiful, natural, authentic wood finish. The textured design is stunning and the WPC floor adds a luxurious, timeless look to your home.
Eco LabelsIn July 2003, the revised Building Standard Law that provides regulations on sick building syndrome was enforced. In response to this, DAIKEN has been offering the highest F4-rank products whose installation floor area is not regulated by the revised law. Moreover, for
the door frame, baseboard, parting edges, and other parts that are not subject to the formaldehyde emission regulations, F4-rank equivalent materials are used.
"4VOC Standards Compliant" is a label based on the industry's voluntary labeling system with respect to the emission of 4VOC (toluene, xylene, ethyl benzene, and styrene) from building materials, operated by the Japan Construction Material & Housing Equipment
Industries Federation and other industrial associations. Although building material manufacturers conventionally used their own standards to indicate this, implementing the industry's common standards* helps customers choose products they need. From this reason,
DAIKEN is continuing to register its products with the "4VOC Standards Compliant "labeling system one after another.
*In April 2008, standards with respect to the emission rate of VOC from building materials were established by the "Committee for standardization of emission rate of VOC from building products" (operated by Japan Testing Center for Construction Materials).
F☆☆☆☆
4VOC Standards Compliant
WPC uses a combination of wood and a plastic resin
filling to achieve outstanding hardness and dent
resistance.WPC also has a strong resistance to stains
and water splashes. Therefore, WPC flooring is widely
used for living rooms, bedrooms, children's rooms, and
even kitchens and bathrooms.
WPC Treatment
WPC Flooring MaterialHard surface exhibits a
strong resistance to
dents and scratches.
WPC treatment
General Flooring MaterialFlooring surface is easily
dented.
WPC flooring withstands the pressure of the wheels of a desk chair, or the impact of a dropped miniature car or building block.
DAIKEN's flooring materials allow you to remove curry, ketchup, and marker stains just by wiping them away.
Falling Ball Impact Test Results
WPC Engineered Wood Flooring
Strong and Durable WPC flooring prevent your floor get scratches easily.
WPC Flooring Material
General Flooring Material
Before wiping After wiping
Before wiping After wiping
General Flooring Material
Strong ammonia resistant,
simple maintenance,
and stain resistant.
Ammonia Resistance Test Results
YE36 General Flooring Material
Excellent scratch resistant coating
to prevents the floor from
dog scratching.
Scratch Resistance Test Results
YE36 General Flooring Material
CSR-D' value: The coefficient of slip resistance intended for pets
*Do not use metal or ball caster wheels.
measured by the Floor Material Construction Method Study Group
Slippery Not slipperyC.S.R・D’Coefficient of Slip Resistance
DAIKEN's general flooring materialDAIKEN's product standard
0.60.50.40.3CSR-D' value
Pet-friendly flooring material YE36
WPC Engineered Wood Flooring Pet Friendly Flooring
: The CSR range considered for walking dogs (DAIKEN standard)
DAIKEN' Slip
resistance surface
treatment protects
your pets from leg
injury.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
28
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷▷▷
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
YP76 12 mm ThickSlipper Uses Surface FinishMatteUnderlayment SystemFor Residential Use
4VOCStandards Compliant
Beautiful and elegance Japanese Wood Surface with premium quality of WPC engineered flooring are resistant to dent, scratches, moisture and stains.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
145
VR chamfering on short sides
Round chamfering on long sides
1,818Horizontal VR grooving
12145
145
WPC decorative plywood single plate
W hard base
YP76-NSK
YP76-NTK
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
YP74 12 mm ThickSlipper Uses Surface MaterialWPC (Natural Wood)
Surface FinishMatteUnderlayment SystemFor Residential Use
4VOCStandards Compliant
Unique and durable, WPC Flooring is a stunning engineered wood with a variety of natural veneer tones.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
303
YP74-NT YP74-NC
YP74-NK YP74-NW
YP74-NS YP74-NN
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, beech/ash straight/cross grain mixed random length board,
UV antimicrobial wear-resistant superfine coating finish
Tongue-and-groove joint on all sides, vertical & horizontal VR grooving (3P), chamfering on long sides and skipped chamfering on short sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
YP62 12 mm ThickSlipper Uses Surface MaterialWPC (Natural Wood)
Surface FinishMirrorUnderlayment SystemFor Residential Use
4VOCStandards Compliant
Natural Japanese Wood by Daiken has an abundance of casual beauty. With strong graining highlighted by shades of honey, tan and cream, this flooring has comfortable style and universal appeal.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
303
YP62-38 YP62-35
YP62-39 YP62-21
12
303
WPC decorative plywood single plate
W hard base
*Note on horizontal V grooving: Horizontal joint portions may not have V grooves to ensure natural flooring finish.
303
Skipped chamfering on short sides Chamfering on long sides
1,818V groove
12
303
WPC decorative plywood single plate
W hard base
303
Skipped chamfering on short sides
Chamfering on long sides
1,818V groove
Surface MaterialWPC (Natural Wood)
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, horse chestnut/chestnut/cedar/ginkgo/Japanese wingnut/Japanese
walnut straight/cross grain mixed random length board, UV antimicrobial wear-resistant natural coating finish
Tongue-and-groove joint on all sides, vertical & horizontal VR grooving (3P), chamfering on long sides and skipped chamfering on short sides
F4-rank JAS (Composite flooring)
12 mm thick, 145 x 1,818 mm
Cardboard case, 6 pieces (1.58 m2) per case
Approx. 14 kg/package
Plywood with W hard base
WPC treatment, natural wood (cedar/horse chestnut) thick single plate (approx. 2.0 mm), UV antimicrobial wear-resistant matte coating finish
Tongue-and-groove joint on all sides, horizontal VR grooving, round chamfering on long sides and VR chamfering on short sides
F4-rank JAS (Composite flooring)
Engineered Wood Flooring - WPC Flooring/Special Proceed Laminate Flooring
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
29
Made In Japan
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, beech/ash straight/cross grain mixed random length board,
UV antimicrobial wear-resistant matte coating finish
Tongue-and-groove joint on all sides, vertical & horizontal VR grooving (3P), chamfering on long sides and skipped chamfering on short sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
YP68 12 mm ThickSlipper Uses Surface MaterialWPC (Natural Wood)
Surface FinishMatteUnderlayment SystemFor Residential Use
4VOCStandards Compliant
WPC treated surface protect that inhibits fading and scratching, giving your new floors a hearty resilience for years to come.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
303
YP68-38
YP68-21YP68-39
YP68-35
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷
▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, hard maple/
cherry/walnut straight/cross grain mixed random length board,
UV antimicrobial wear-resistant matte coating finish
Tongue-and-groove joint on all sides
(2P) Vertical & horizontal V grooving, chamfering on long sides and slight chamfering on short sides
(3P) Vertical & horizontal V grooving, chamfering on long sides and skipped chamfering on short sides
(5P)No groove, slight chamfering on all sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s■Plain View
(2P) (3P) (5P)
■Cross-sectional View
YP77 12 mm ThickSlipper Uses Surface MaterialWPC (Natural Wood)
Surface FinishMatteUnderlayment SystemFor Residential Use
4VOCStandards Compliant
Impressive matt finish surface beautifully crafted through ultra, realistic designs and the latest in innovative technologies.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
303
YP7701-50 YP7705-50
(5P No Groove)(3P)(2P)
YP7701-13 YP7705-13
YP7701-70
YP7702-50
YP7702-13
YP7702-70 YP7705-70
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
YP75 12 mm ThickSlipper Uses Surface MaterialWPC (Natural Wood)
Surface FinishHigh GlossUnderlayment SystemFor Residential Use
4VOCStandards Compliant
The glossy surface with characteristic graining and beautiful pattern sets it apart, bringing a wonderfully unique look to your home.
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
303
YP75-YC
YP75-MT
YP75-MF
303
Chamfering on long sides
1,818
Slight chamfering on short sides
303
1,818
Skipped chamfering on short sides
V groove V groove303
Slight chamfering on all sides
1,818
303
12
303
12
303
12
303
Skipped chamfering on short sides
Chamfering on long sides
1,818V groove
12
303
WPC decorative plywood single plate
W hard base
YP75-ML
YP75-MW
Chamfering on long sides
WPC natural wood thin single plate
Plywood with W hard base
WPC natural wood thin single plate
Plywood with W hard base
WPC natural wood thin single plate
Plywood with W hard base
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
〈YC/MT/MF〉 WPC treatment, natural wood thin single plate, ash straight/cross grain mixed random length board, UV antimicrobial wear-resistant fine coating finish
〈ML/MW〉 WPC treatment, natural wood thin single plate, beech straight/cross grain mixed random length board, UV antimicrobial wear-resistant fine coating finish
Tongue-and-groove joint on all sides, vertical & horizontal VR grooving (3P), chamfering on long sides and skipped chamfering on short sides
F4-rank JAS (Composite flooring)
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
303
Skipped chamfering on short sides
Chamfering on long sides
1,818V groove
12
303
WPC decorative plywood single plate
W hard base
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
30
Slight chamfering on short sides
YE33 12 mm ThickSlipper Uses Surface MaterialDecorative Sheet (Olefin)
Surface FinishMirrorUnderlayment SystemFor Residential Use
4VOCStandards Compliant
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
YN71 12 mm ThickSlipper Uses Surface MaterialDecorative Sheet (Olefin)
Surface FinishMatteUnderlayment SystemFor Residential Use
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
Special olefin sheet,
UV antimicrobial wear-resistant superfine coating finish
Tongue-and-groove joint on all sides, 606-mm pitch horizontal V grooving, slight chamfering on all sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
Graphiarts Superfine Engineered wood flooring with a stunning mirror finish and a variety of marble texture.
303
YE33-SW
YE33-SEYE33-SP
YE33-SN
YE33-SX
YE33-SF
YE33-SD
YE33-SG
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷▷▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 22 kg/package
2.7 mm special MDF + Eco-friendly plywood
Special toughened film
Tongue-and-groove joint on all sides, vertical VR grooving, chamfering on long sides and slight chamfering on short sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
4VOCStandards Compliant
The textures and tones of the world's most beautiful species converge in this collection of laminate flooring from Daiken: A rich array of styles designed to inspire your home spirit.
303
YN71-88
YN71-53YN71-52
YN71-50
YN71-13
YN71-30
YN71-70
YN71-78303
Chamfering on long sides
1,818V groove
303
12
YN77 12 mm ThickSlipper Uses Surface MaterialDecorative Sheet (Olefin)
Surface FinishMatteUnderlayment SystemFor Residential Use
■ Labels Related to Public Certifications and Industrial Associations
F☆☆☆☆
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷▷▷
12 mm thick, 178 x 1,818 mm
Cardboard case, 10 pieces (3.2 m2) per case
Approx. 22 kg/package
2.7 mm special MDF + Eco-friendly plywood
Special toughened film, lap finishing on all sides
Tongue-and-groove joint on all sides, round chamfering on all sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
4VOCStandards Compliant
The Special Proceed Laminate Flooring with Japanese wood surface accentuates the beauty and character of each individual plank. This collection features fantastic exotic wood species patterns, with deep, rich color and unique grain patterns.
178
Round chamfering on short sides
Round chamfering on long sides
1,818
E hard base(2.7 mm special MDF + Eco-friendly plywood)
Special toughened film
178
12
E hard base
(2.7 mm special MDF + Eco-friendly plywood)
Special toughened film
YE36 12 mm ThickSlipper Uses Surface MaterialDecorative Sheet (Olefin)
Surface FinishMatteUnderlayment SystemFor Residential Use
■ Labels Related to Public Certification and Industrial Associations
F☆☆☆☆
Dimensions
Packing material, quantity
Package weight
Base material
Surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷▷▷
12 mm thick, 303 x 1,818 mm
Cardboard case, 6 pieces (3.3 m2) per case
Approx. 30 kg/package
Plywood with W hard base
Slip-proof special toughened film
Tongue-and-groove joint on all sides, vertical VR grooving (2P), chamfering on long sides and slight chamfering on short sides
F4-rank JAS (Composite flooring)
S p e c i f i c a t i o n s
■Plain View ■Cross-sectional View
4VOCStandards Compliant
YE36 is designed especially for families with pets, children and active lifestyles.
303
YE36-MH-N YE36-72-N YE36-13-N YE36-73-N
303
Chamfering on long sides
1,818
Slight chamfering on short sides
V groove303
12
W hard base
Slip-proof special toughened film
178
YN7701-88
YN7701-30YN7701-52
YN7701-50
YN7701-13
YN7701-33 YN7701-70
YN7701-62
YN7701-40
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
303
12
W hard base
Special olefin sheet
303
1,818
Slight chamfering on all sides
V groove
606 606
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
Flooring Made In Japan
Renewable floor Wax freeDent and scratch proof
Easy renovation of flooring is allowed for apartments and houses for rent, which subject to frequent moving in/out.
The high maintainability of the product contributes to the running cost reduction.
Partially replaceable
■ Excellent scratch resistance and maintainability
■ Easy one-by-one board replacement
Dent and scratch proof
Renewable floor General floor
Comparison of scratches caused by dropping objects
Easy care
Renewable floor General floor (ink stain remains)
Stain resistance comparison
Attach a suction cup to the center of a board and
pull it up.
When the center of the board is lifted up, insert
your hand beneath it, and raise the short and
groove side of the board.
Pull out the short and tongue side in a horizontal direction
to remove the entire board.
* Special adhesive (CBA91K011 (quantity: 12))
● Resists dents caused by the weight of furniture.
● Resists scratches caused by dragged furniture or dropped
small objects.
● The special coating material "EB Sheet" resists stains.
● Wax free and easy to clean
● Resists discoloration and cracking caused by direct sunlight.
● This product cannot be installed on concrete. Always install it on wooden bases such as plywood
or particle boards.
● The overall softness of the floor is improved by the combination of the special adhesive
(silicone-based)* and soft resin mats used as the floor base material. Make sure to use the
special adhesive*.
● Easily flooring replacement is allowed from only one board.
Special made-to-order product An individual consultation is required before ordering this product. Please contact your local representative for details.
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
32
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Edge processing
Formaldehyde regulations
Special adhesive
▷
▷▷▷▷▷▷▷
For 1st floors: 5.7 mm thick, 150 mm wide × 910 mm long,
For 2nd floors: 8.7 mm thick, 150 mm wide × 910 mm long,
Cardboard case, 24 pieces (3.276 m2) per case
For 1st floors: Approx. 24 kg/package, For 2nd floors: Approx. 25 kg/package
MDF, resin (polyvinyl chloride) mat
Olefin sheet (pre-coated)
Tongue-and-groove joint and slight chamfering on all sides
F4-rank certificate of Minister
Silicone resin adhesive 760 ml/piece [sold separately]
Cartridge type, F4-rank certificate of Japan Adhesive Industry Association
S p e c i f i c a t i o n s
■ Cross-sectional View
■ Structure used for measurement (2 × 4)
Lightweight floor impact sound isolation test (example)
8.7-mm thick renewable floor
35-mm thick ALC board
15-mm thick OSB
2 × 10 lumber
Vibration proof ceiling hanger
RW 55 mm
15-mm thick plasterboard
(fabric finished)
<General type>
EB Sheet
Total thickness 5.7 mm Total thickness 8.7 mm
Base material (MDF)
Vibration damper (resin mat)
<Sound-proof type>
■ Impact sound reduction
<TL (LIGHT)> <SH (HARVEST BIRCH)>
<SF (FANGO MAPLE)> <SM (MIRAGE MAPLE)>
(Note) During the use, up to 2.0-mm wide clearance might be generated between flooring boards. This is the property of the product to ensure the performance of renewability.
Reinforced-concrete structure: LL-50 level *1 Wooden house: LL-55 level *2
*1 The data was measured at the test site where the product was installed on a 150-mm concrete slab.
*2 The data was measured at the test site where 2 × 4 construction was implemented.
* The measured data is the result of the test conducted at the test site and not guaranteed.
EB Sheet
Base material (MDF)
Vibration damper (resin mat)
Shock absorber (foamed resin)
The combination of the resin mat for vibration suppression and plastic-foam shock absorber reduces impact sounds
on lightweight floors. Clattering, high-pitched impact sound that is transferred to lower floors can be suppressed.
Floo
r im
pact
sou
nd le
vel (
dB)
Octave Band Center Frequency (Hz)
90
80
70
60
50
40
30
83 125 250
L-60
L-55
L-50
300 1000 2000 4000
L-55 was achieved!
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
Flooring
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
33
Made In Japan
YX-169 Adhesive-type flooring for remodeling
Screw free, adhesives free. Installation is quiet and quick.
Enhanced easy-care features
The back surface isadhesive-treated for securefixing.
Just put them on.
Adhesive treatment on the back surface
Before
AAAAAAffffftttttttttttttttteeeeerrrrrr
* The product in the above picture is different from the product described in this section.
Wax free
Waxing is not necessary for this easy-care product.
Scratch proof
The Scratch-Guard function is implemented.
Dent and scratch proof
This product has a strong resistance to dents and scratches that can be caused when objects are dragged.
This high resistance property allows the use of chairs with caster wheels and wheelchairs.
Clean the surface of the installation
surface to remove dust and
particles.
Decide the layout of flooring. Remove the clear film
from the back of the board.
Put the boards on the installation
surface and press them evenly
with hand.
(with the white adhesive face down)
When cutting this product:
Snap the board.
In the same way, repeat
cutting for 2 to 3 times.
Repeat cutting for 2 to 3
times using a cutter.
Front (texture)
Back (white)
Clear film
1 2 3 4 5
FFFFFFFFlllllllllloooooooooooooooooorrrrrrrrrrrrrrrrrrr rrrrrrrrrrrrrrrrrreeeeeeeennnnnnooooovvvvvvaaaaaatttttttttttttttttttiiiiiiiiiiiiiiiiooooooooooooooooooonnnnn ccccccccaaaannnnn bbbbbbbbbbbbbbbeeeeeeeeeee ccccooooommmmppppppppppppppplllllllllllllleeeeeeeeeeeeeeeeeeeeeettttttttttteeeeeeeeddddddddiiiiiiiiiiiiiiiinnnnnnnnnnnnnnnnnnn aaaaaaaaaaa ssssssshhhhhhhhhhooooorrrrrrrrrrrrrrrrttttttttttttttttttt ppppppppppppppppppppeeeeeerrrrrrrriiiiiiiiiiiiiiiiiiiiiooooooooooooooooooooooooooooddddddddddd ooooooooooooofffffffffffff wwwwwoooorrrrkkkk...
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
This product is popular for its width and precious-wood design which come with five color options.
Selection is possible according to the fixtures and furniture.
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷▷▷▷
4 mm thick, 150 x 900 mm
Cardboard case, 12 pieces (1.62 m2) per case
Approx. 6 kg/package
MDF
Special olefin sheet
PVC sheet and adhesive with non-woven fabric
Cutting off and chamfering on all sides
F4-rank according to Labeling Guidelines for Housing Performance
Specifications
■ Plain View ■ Cross-sectional View
Fittings
MH <ASH (Super pale)>
10 <BIRCH>
72 <WALNUT (Light)>
73 <WALNUT (Dark)>
13 <CHERRY>
900
150
Front surface: Special olefin sheet
Base material: MDF
Back surface: PVC and adhesivewith non-woven fabric
150C0.9
4
Low VOC Antibacterial Slip resistant
Wheelchair OK Durable against casters Wax free
Scratch resistant
Stain resistant
Meticulous Performance
YX169-■■* The■■ in the product stock numbers represent the surface color and texture.
When ordering, please use the alphanumeric letters to specify the product.
MH<ASH (Super pale)>
10<BIRCH>
72<WALNUT (Light)>
73<WALNUT (Dark)>
13<CHERRY>
<SILVER><BRONZE>
Aluminum-type Step parting 3Tfor 4 mm thick flooring
Aluminum-type Step parting 3Tfor 4 mm thick flooring
1,950 mm type: 22 × 1,950 mm (2 pieces per package)
YR0623-ZB1,950 mm type: 22 × 1,950 mm (2 pieces per package)
YR0623-ZS
Color and texture variation
Alu
min
um
typ
e
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Formaldehyde regulations
▷
▷
▷
▷
▷▷▷
(Entrance fitting) 7 mm thick, 40 × 1,950 mm
(Wall parting) 5.7 mm thick, 15 × 1,950 mm, (Step parting) 5.7 mm thick, 20 × 1,950 mm
(Entrance fitting) 1 piece/package
(Wall parting) 2 pieces/package, (Step parting) 2 pieces/package
(Entrance fitting) Approx. 1.0 kg/package
(Wall parting and Step parting) Approx. 0.8 kg/package
(Entrance fitting) MDF
(Wall parting and Step parting) ABS resin (with wood meal)
(Entrance fitting) Special olefin sheet
Special double-sided tape attached
Unregulated parts
Specifications
* The■■ in the product stock numbers represent the surface color and texture. When ordering, please use
the above alphanumeric letters to specify the product.
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Formaldehyde regulations
▷▷
▷▷▷▷
1.5 mm thickness, 22 × 1,950 mm
2 pieces per package
(Double-sided positioning tape
and screws included in a package)
Approx. 0.7 kg/package
Aluminum
(Anodized aluminum finish)
Unregulated parts
Specifications
■ Cross-sectional View
■ Arrangement
22
5
3.5
22
5.0
Existing aluminum sash
Existing underlayment
Head tapping screw (supplied)
3.5 dia. × 20 mm
Existing flooring
Adhesive flooring
* Special adhesive for the wall or step parting included in a package
Res
in t
ype
MD
F ty
pe
1,950 mm type: 40 × 1,950 mm (1 piece per package), YXZ018-■■
Entrance fitting■ Cross-sectional View ■ Arrangement
Double-sided tape
40
7
34
40
7
Existing
entrance frame
Entrance fitting Adhesive flooring
Existing underlayment t12.0
Existing cushion floor t1.0
Wall parting Step parting
72 <WALNUT (Light)> 72 <WALNUT (Light)>
1,950 mm type: 15 × 1,950 mm (2 pieces per package)
YR0321-■■1,950 mm type: 20 × 1,950 mm (2 pieces per package)
YR0323-■■
■ Cross-sectional View
■ Arrangement
■ Cross-sectional View
■ Arrangement
15
2.5
5.7
2
10-mm width double-sided tape
Adhesive flooring
Conventional flooring
15.0
5.7
20
15
5.7
2
10-mm width double-sided tape
Allow 1 to 2 mm of clearance
5.0 15.0
5.7Adhesive flooring
Existing flooring
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
35
Flooring Made In Japan
YK95-DW Shoes-on flooring 12 mm thick13.5 mm thick15 mm thickShoes-on Surface MaterialWPC (Natural Wood)
Surface FinishMatte
UnderlaymentsystemDirect FixPublic and
commercial facilities
The new standard for shoes-on flooring■ Official Certification and Industry Group-related Declarations
F☆☆☆☆
YK95-DWK01 (Underlayment system, 12 mm thick) YK95-DWK05 (Underlayment system, 12 mm thick) YK95-DWK21 (Underlayment system, 12 mm thick)
YK95-DWK39 (Underlayment system, 12 mm thick) YK95-DWK50 (Underlayment system, 12 mm thick) YK95-DWK13 (Underlayment system, 12 mm thick)
YK95-DWKNS (Underlayment system, 12 mm thick) YK95-DWKNK (Underlayment system, 12 mm thick) YK95-DWKHK (Underlayment system, 12 mm thick)
YK95-DWK70 (Underlayment system, 12 mm thick)
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
12 mm thick, 94 × 909 mm
Cardboard case, 36 pieces (3.07 m2) per case
Approx. 28 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, oak/beech/ash/
hard maple/cherry/walnut/cedar/chestnut/Japanese cypress
straight/cross grain mixed board, UV antimicrobial wear-resistant finish
Tongue-and-groove joint on all sides, round chamfering on long sides and chamfering on short sides
F4-rank JAS (Composite flooring)
Specifications (Underlayment system)
96
90596
with W hard baseBack-grooved plywood 【12 thick】
WPC decorative plywood single plate
Urethane resinfoam【3 (1.5) thick】
15.0
(13.
5)
3.0
(1.5
)12
Chamfering on short sides Round chamfering on long sides
■ Plain View ■ Cross-sectional View
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷
▷▷
15 mm thick, 96 × 905 mm, or 13.5 mm thick, 96 × 905 mm
Cardboard case, 36 pieces (3.12 m2) per case
15 mm thick: Approx. 28 kg/package, 13.5 mm thick: Approx. 28 kg/package
Back-grooved plywood with W hard base
WPC treatment, natural wood thin single plate, oak/beech/ash/
hard maple/cherry/walnut/cedar/chestnut/Japanese cypress
straight/cross grain mixed board, UV antimicrobial wear-resistant finish
Double-side flat urethane resin foam (For 15-mm thick product: 3 mm thick,
for 13.5 mm thick product: 1.5 mm thick)
Tongue-and-groove joint on all sides, round chamfering on long sides and chamfering on short sides
F4-rank JAS (Composite flooring)
Specifications (Direct fix)
■ Plain View ■ Cross-sectional View 15 mm thick
(13.5 mm thick)
Coated surface
(UV antimicrobial wear-resistant coating)
Back-grooved plywood
Base material
(W hard base)Resin reinforced layer
Decorative material
(WPC decorative plywood single plate)
Urethane resin foam
Coated surface
(UV antimicrobial wear-resistant coating)
Plywood
Base material
(W hard base)
Resin reinforced layer
Decorative material
(WPC decorative plywood single plate)94
90994
Plywood with W hard base【12 thick】
WPC decorative plywood single plate
12
Round chamfering on long sidesChamfering on short sides
Direct Fix 15 mm thick or 13.5 mm thick
Underlayment system 12 mm thick
Japanese wood plywood
96
(9
4)
Order
4VOCStandards Compliant
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
36
YK95-FW Shoes-on flooring (Wide type) ■ Official Certification and Industry Group-related Declarations
F☆☆☆☆
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷
12 mm thick, 145 × 909 mm
Cardboard case, 24 pieces (3.16 m2) per case
Approx. 28 kg/package
Plywood with W hard base
WPC treatment, natural wood thin single plate, oak/beech/ash/
hard maple/cherry/walnut/cedar/chestnut/Japanese cypress
straight/cross grain mixed board, UV antimicrobial wear-resistant finish
Tongue-and-groove joint on all sides, round chamfering on long sides and chamfering on short sides
F4-rank JAS (Composite flooring)
Specifications (Underlayment system)
■ Plain View ■ Cross-sectional View
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷
▷▷
15 mm thick, 147 × 905 mm, or 13.5 mm thick, 147 × 905 mm
Cardboard case, 24 pieces (3.19 m2) per case
15 mm thick: Approx. 28 kg/package, 13.5 mm thick: Approx. 28 kg/package
Back-grooved plywood with W hard base
WPC treatment, natural wood thin single plate, oak/beech/ash/
hard maple/cherry/walnut/cedar/chestnut/Japanese cypress
straight/cross grain mixed board, UV antimicrobial wear-resistant finish
Double-side flat urethane resin foam (For 15-mm thick product: 3 mm thick,
for 13.5 mm thick product: 1.5 mm thick)
Tongue-and-groove joint on all sides, round chamfering on long sides and chamfering on short sides
F4-rank JAS (Composite flooring)
Specifications (Direct fix)
■ Plain View ■ Cross-sectional View 15 mm thick
(13.5 mm thick)
Distinctive wide boards create a high-quality space.
YK95-FW01 (Direct fix, 15 mm thick)
YK95-FWT01 (Direct fix, 13.5 mm thick)
YK95-FWK01 (Underlayment system, 12 mm thick)
YK95-FW21 (Direct fix, 15 mm thick)
YK95-FWT21 (Direct fix, 13.5 mm thick)
YK95-FWK21 (Underlayment system, 12 mm thick)
YK95-FW39 (Direct fix, 15 mm thick)
YK95-FWT39 (Direct fix, 13.5 mm thick)
YK95-FWK39 (Underlayment system, 12 mm thick)
YK95-FW50 (Direct fix, 15 mm thick)
YK95-FWT50 (Direct fix, 13.5 mm thick)
YK95-FWK50 (Underlayment system, 12 mm thick)
YK95-FW13 (Direct fix, 15 mm thick)
YK95-FWT13 (Direct fix, 13.5 mm thick)
YK95-FWK13 (Underlayment system, 12 mm thick)
YK95-FW70 (Direct fix, 15 mm thick)
YK95-FWT70 (Direct fix, 13.5 mm thick)
YK95-FWK70 (Underlayment system, 12 mm thick)
YK95-FWNS (Direct fix, 15 mm thick)
YK95-FWTNS (Direct fix, 13.5 mm thick)
YK95-FWKNS (Underlayment system, 12 mm thick)
YK95-FWNK (Direct fix, 15 mm thick)
YK95-FWTNK (Direct fix, 13.5 mm thick)
YK95-FWKNK (Underlayment system, 12 mm thick)
YK95-FWHK (Direct fix, 15 mm thick)
YK95-FWTHK (Direct fix, 13.5 mm thick)
YK95-FWKHK (Underlayment system, 12 mm thick)
Japanese wood plywood
Direct Fix 15 mm thick or 13.5 mm thick
Coated surface
(UV antimicrobial wear-resistant coating)
Resin reinforced layer Base material
(W hard base)
Urethane
resin foam
Back-grooved plywood
Decorative material
(WPC decorative plywood single plate)
Coated surface
(UV antimicrobial wear-resistant coating)
Resin reinforced layer Base material
(W hard base)Plywood
Decorative material
(WPC decorative plywood single plate)
147
905147
with W hard baseBack-grooved plywood 【12 thick】
WPC decorative plywood single plate
Urethane resinfoam【3 (1.5) thick】
15.0
(13.
5)
3.0
(1.5
)12
Chamfering on short sides Round chamfering on long sides
145
909145
Plywood with W hard base【12 thick】
WPC decorative plywood single plate
12
Round chamfering on long sidesChamfering on short sides
14
7 (
14
5)
4VOCStandards Compliant
12 mm thick13.5 mm thick15 mm thickShoes-on Surface MaterialWPC (Natural Wood)
Surface FinishMatte
UnderlaymentsystemDirect FixPublic and
commercial facilitiesOrder
Underlayment system 12 mm thick
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
37
Flooring Made In Japan
Direct Fix 15.5 mm thick
YK97 Shoes-on flooring Soundproof
This high-spec shoes-on flooring provides both quietness and beauty.■ Official Certification and Industry Group-related Declarations
F☆☆☆☆
YK97-DW01 (96 mm width)
YK97-FW01 (147mm width)
YK97-DW05 (96 mm width) YK97-DW21 (96 mm width)
YK97-FW21 (147mm width)
YK97-DW39 (96 mm width)
YK97-FW39 (147mm width)
YK97-DW50 (96 mm width)
YK97-FW50 (147mm width)
YK97-DW13 (96 mm width)
YK97-FW13 (147mm width)
YK97-DWNS (96 mm width)
YK97-FWNS (147mm width)
YK97-DWNK (96 mm width)
YK97-FWNK (147mm width)
YK97-DWHK (96 mm width)
YK97-FWHK (147mm width)
YK97-DW70 (96 mm width)
YK97-FW70 (147mm width)
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Edge processing
Formaldehyde regulations
▷
▷
▷▷▷
▷▷
▷
[DW type] 15.5 mm thick, 96 × 905 mm [FW type] 15.5 mm thick, 147 × 905 mm [DW type] Cardboard case, 36 pieces (3.12 m2) per case
[FW type] Cardboard case, 24 pieces (3.19 m2) per case Approx. 28 kg/package
Back-grooved plywood with W hard base
WPC treatment, natural wood thin single plate, oak/beech/ash/
hard maple/cherry/walnut/cedar/chestnut/Japanese cypress
straight/cross grain mixed board, UV antimicrobial wear-resistant finish
Non-woven fabric (3.5 mm thick)
Tongue-and-groove joint on all sides, round chamfering on long sides
and chamfering on short sides
F4-rank JAS (Composite flooring)
Specifications
■ DW type Plain View ■ DW type Cross-sectional View, 15.5 mm thick
■ FW type Plain View ■ FW type Cross-sectional View, 15.5 mm thick
Japanese wood plywood9
6 (
14
7)
Order
4VOCStandards Compliant
Coated surface
(UV antimicrobial wear-resistant coating)
Resin reinforced layer Base material
(W hard base)Non-woven
fabric
Back-grooved plywood
Decorative material
(WPC decorative plywood single plate)
96
905
with W hard baseBack-grooved plywood 【12 thick】
WPC decorative plywood single plate
Non-woven fabric【3.5 thick】
15.5
3.5
12
Chamfering on short sides Round chamfering on long sides
96
147
905
Chamfering on short sides Round chamfering on long sideswith W hard baseBack-grooved plywood 【12 thick】
WPC decorative plywood single plate
Non-woven fabric【3.5 thick】
15.5
3.5
12
147
15.5 mm thick Surface MaterialWPC (Natural Wood)
Surface FinishMatteShoes-onDirect FixPublic and
commercial facilities
Ligh
twei
ght
floor
impa
ct
soun
d re
duct
ion
(dB
)
Octave Band Center Frequency (Hz)
063 125 250 500 1000 2000
60
50
40
30
20
10
■ The result of the tests on the reduction of floor impact sound level Product test data
⊿LL (Ⅰ)-3
Lightweight floor impact sound reduction performance: ⊿LL (Ⅰ)-3 (LL50 equivalent)
[DW]
Measured by General Building Research Corporation of Japan
Test number: Ⅳ A-15-0211
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
38
YK89 Shoes-on flooring
F☆☆☆☆
Dimensions
Packing material, quantity
Package weight
Base material
Front surface
Back surface
Edge processing
Formaldehyde regulations
▷▷▷▷▷
▷▷▷
4.7 mm thick, 150 × 900 mm
Cardboard case, 24 pieces (3.24 m2) per case
Approx. 22 kg/package
Special MDF
WPC treatment, natural wood thin single plate, oak/birch, UV antimicrobial
wear-resistant coating
PVC (1.6 mm thick)
Tongue-and-groove joint and chamfering on all sides
F4-rank JAS (Composite flooring)
Specifications
■ Plain View ■ Cross-sectional View
The total thickness is only 4.7 mm.This shoes-on flooring minimizes hight differences between the product and other materials such as tiles and carpets.
■ Official Certification and Industry Group-related Declarations
YK89-82-M (Matte) YK89-30-M (Matte)
YK89-83-M (Matte) YK89-17-M (Matte)
15
0
4VOCStandards Compliant
YK89
4.7 mm thick Surface FinishMatte
Surface MaterialWPC (Natural Wood)Shoes-onDirect Fix
Coated surface (UV antimicrobial wear-resistant coating)
Special MDF
PVC
Decorative material
(WPC decorative plywood single plate)
Direct Fix 4.7 mm thick
Chamfering on all sides
150
900
Special MDF【2.7 thick】
WPC treatment, natural wood
thin single plate
PVC【1.6 thick】
4.7
150
Public and commercial facilities
Steps between different flooring materials are minimized
to achieve a neat design.
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
Smooth transition
YK89 Tile, carpet, etc.
General wood flooring Tile, carpet, etc.
General flooring
A step is left.
MD
FC
eilin
gF
loo
ring
Inte
rior D
oo
rC
ab
ine
tW
all
Bu
ildin
g A
co
us
tics
Oth
ers
39
Flooring
Tales of Forests
An extensive lineup of the product meets any need of different styles of interior design.
Enhanced woodgrain finish creates the traditional atmosphere with emphasized wooden texture.
Not only for simple contemporary designs, this product is optimal for modern traditional styles.
12
7
909
■Plain View
Residential Use Slipper Uses 12 mm thick Surface MaterialNatural Wood
Made in China
* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.* The above flooring materials are not designed for use with shoes on.
YD18-BR
Size: 12 mm thick, 127 × 909 mm
YD18-BV
YD18-CL
YD18-GR
YD18-MT
YD18-TE
YD18-WU
YD23-BV (Grain enhancement)
YD23-GR (Grain enhancement)
YD23-MT (Grain enhancement)
YD23-TE (Grain enhancement)
YD23-WU (Grain enhancement)
Extensive lineup
MD
FC
eilingFlooring
Interior Door
Cabinet
Wall
Building A
cousticsO
thers
40
Made In JapanTatami mat
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Tatami Facing
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
41 * The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Tatami Facing
From a luxurious type to versatile type, DAIKEN's tatami facing offers various types of patterns.
The product can be used for a wide range of locations such as houses, apartments, hotels and restaurants.
<Sazanami (Ripple)>With its rug-like appearance, this tatami facing fits in with not only Japanese-style rooms but also Western-style interiors.
<14 Grayish pink>
<15 Light brown> <16 Light green>
No edging type
<01 Chestnut × Walnut> <02 Grayish pink × Light brown>
<03 Milk white × Light brown>
No edging type Edging type<Seiryu [Meseki (fine) weave]>Suitable for housing, hotels Japanese-style inns, restaurants and tearooms which may be crowded with people. A conventional Japanese room will be transformed into a modern space. This pattern is suitable for both edging and no-edging type tatami.
No edging type Edging type
<16 Light green>
<12 Chestnut >
<09 Ink black>
<15 Light brown>
<11 Silver gray>
<06 Flax>
<14 Grayish pink>
<10 Milk white>
<02 Gold>
<18 Light pink>
<21 Golden brown>
<17 Indigo>
<20 Celadon>
<19 Walnut>
Colored products
<Seiryu Stripe [Meseki (fine) weave]>The distinctive, shaded two-tone color of this tatami facing is ideal for modern, luxurious spaces.
<Seiryu Cocktail Fit [Meseki (fine) weave]>Eight colors that fit in with wood flooring are available. This tatami facing is optimal for tatami corners in the living room.
<09 Gold × Milk white> <13 Flax × Light brown> <15 Milk white × Light brown>
No edging type Edging type
<17 Light brown × Grayish pink>
<23 Light brown × Light pink>
<21 Silver white × Light green>
<24 Chestnut × Indigo>
<22 Chestnut × Walnut>
<Ayanami (Wave) [Middle twill weave]>This twill-woven facing is designed for no edge tatami mat. The product features a novel diagonal pattern.
<01 Silver white>
<02 Gold> <03 Gold and silver>
No edging type
<01 Silver white>
<Kome (narrow)><Ome (wide)>
<Shoryu* For alcove only>This is a tatami facing dedicated for Japanese alcove. It creates sophisticated traditional beauty and luxuriousness.
Edging type<Ginpaku (Silver white) [Hikime (1.5 cm wide) weave]>This tatami facing has a refreshing silver-white color. It is suitable for various buildings from general housing and apartments to restaurants.
<01 Silver white>
<Ginpaku products [Hikime (1.5 cm wide) weave]>Suitable for a wide range of applications including residential and commercial use.
Edging type
<10 Milk white>
<15 Light brown>
<12 Chestnut > <14 Grayish pink>
<19 Walnut>
Tatami facing featuring versatile weave patterns and colors
* Both marks are shown for products which are suitable for tatami mats with both edging and no edging.No edging type
The product is suitable for tatami mats with no-edging. Edging type
The product is suitable for tatami mats with edging.
■ Description of marks
Made In JapanTatami Mats
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
42
YQ51
Resistant to Mold and MitesDAIKEN's Tatami facing products exhibit excellent antimold performance even under severe conditions, allowing less mold growth than general rush-based Tatami facing.
Approx. 3 Times the Resistant of General Rush-based Tatami FacingIt's always a concern for families with children and pets to protect Tatami mats from damage.DAIKEN's Tatami facing products have 3 times the resistance of general rush-based Tatami facing, ensuring a long-lasting beauty.
Stain Resistant Tatami Mat for Ease of CleaningDAIKEN's resin-coated Tatami mats have excellent water-repellency, allowing you to clean drink spills just by wiping them away.
Resistant to Sunburn and Color Fading for Long-lasting BeautyFading caused by UV radiation is a major concern for Tatami facing. DAIKEN's Tatami facing products are almost free of fading, ensuring a long-lasting beauty.
● Tested by cultivating mold for 28 days at a temperature of 28℃ and a humidity of 97% (Photos showing mold grown after 14 days)
Mold Resistance Test Results
Wear Resistant Test Results
Rush-based Tatami Facing DAIKEN's Tatami Facing
● Tested by exposing the specimen to UV radiation equivalent to approx. 2 years
Light Resistance Test Results
Rush-based Tatami Facing DAIKEN's Tatami Facing
Rush-based Tatami Facing DAIKEN's Tatami Facing
820
820
<01 GREEN>YQ5101-2 (2 pieces per package)YQ5101-3 (3 pieces per package)
<03 IVORY>YQ5103-2 (2 pieces per package)YQ5103-3 (3 pieces per package)
<05 BROWN>YQ5105-2 (2 pieces per package)YQ5105-3 (3 pieces per package)
<02 YELLOW>YQ5102-2 (2 pieces per package)YQ5102-3 (3 pieces per package)
<04 BROWN>YQ5104-2 (2 pieces per package)YQ5104-3 (3 pieces per package)
<06 DARK>YQ5106-2 (2 pieces per package)YQ5106-3 (3 pieces per package)
DimensionsPacking material, quantity
WeightBase material
▷▷
▷▷
13 mm thick, 820 x 820 mmCardboard case(2 or 3 pieces per package)Approx. 3 kg per pieceInsulation board
Front surface
Back surfaceFormaldehyde regulations
▷
▷▷
Machine-made Japanese Washi paper* fabrics(DAIKEN's Tatami facing)Slip-proof sheetLabeling exempted product
S p e c i f i c a t i o n s
■Cross-sectional View
*Machine-made Japanese Washi paper is used. This is not hand-made Washi paper made of hybrid mulberry, oriental paperbush, etc.
Machine-made Japanese Washi paper* fabrics
Cushioning layerInsulation boardThickness adjustment layerSlip-proof sheet
Protective layer
13
Tested using abrasive paper #180 to check the wear condition after 100 revolutions with a load of 250 g x 2
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Interior Door
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
43
Made In Japan
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations
DAIKEN's doors feature easy removal ofdifficult-to-remove stains such as marker scribbles by children and ooil stains, saving the workload of cleaning.
Daiken Engineered Doors improve your quality of life.
Short-stroke Lever Handle
Improved stain resistance by use of a wipeable surface sheet*
enables easy removal of marker stains.of marker stains.
Easy-to-clean Surface Material
*Adopted as the surface sheet for the dooor frame andparting edges of the HP/HB series.
Marker Stain
of the country or region w
oor, frame, and
g used.where they are being
Oil Stain
Even when your hands are full withshopping bags or laundry, gentlytouching this handle opens and closesthe door for you. This is an easy-to-uselever handle suitable for the elderly and those with weak physical strength.
Gentle touch lever handle allows you to open and close the door
even when holding laundry or shopping bags in your arms.
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
44* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
the Easy Closefeature, which works to slow down the door just beforeit completely closes to suppress the risk of door rebounding, slamming sound, and finger pinching, even if you slammed the door shut carelessly.
When the door enters the working range of
the Self-Closing feature, it is pulled in
slowly, held firmly, and then closed.
Hanging Door System
Soft closing mechanism allows door to move slowly when
closing the sliding doors suppresses the risk of door rebounding,
slamming sound, and finger pinching.
Soft closing function for Sliding/Hanging Door System
cleaning work easy because of no floor rails subject to dust accumulation. Moreover, their steplessfloor surface is friendly to everyone because of ease of passage forwheelchair users and a low risk of stumbling for toddlers and theelderly.
Top rail hanging doors
fulfill the need for a flat, large room.
2-leaf Interlocking Sliding Door System
Our 2-leaf interlocking sliding doorsprovide a wider passage way even in narrow room arrangement because the first leaf moves in conjunction with the second leaf. They are idealfor both wheelchair users and carers because of ease of travel between rooms.
Wider door access with slight door movement in the room.
Pet Door System
Pet owners can be more kind to their pets and feel more relaxed - knowing their animals can safely come and goas they please.
Pet doors have a special gate for pets,
allowing cats and dogs to enter and exit the house as they please.
Self-Closing Feature
Self-Closing FeatureOpen
Close
*3-leaf double, 2-leaf single, and 3-leaf
single sliding door systems require
directly installed floor rails.
2P
2J
2S
8P
3P
3J
3S
0C
0P
0J
0S
6P
1P
1J
1S
7P
5P
5J
5S
4P
4J
4S
<HH>
Precious Wood TextureSix popular texture patterns for interior use are selected. Each pattern is a realistic representation of color, grain, texture of the corresponding precious wood.
Unique design delivering a new sense of beauty of Wa, combined with premium ease of use, creates a high-quality living space.
Glossy Wood TextureGlossy texture delivers elegance to your interior.Mirror finished lineup now includes additional grain texture variations.
Leather TextureFaithful representation of natural leather texture satisfies the passion of mature adults for quality.
Matt TextureDull and soft monotone matt texture delivers a sophisticated and prestigious atmosphere.
<HL> <HA>
<HT> <HW> <HK>
<LH> <LL>
<LT> <LW>
XH RIPPLE <WHITE>
XD RIPPLE <DARK>
<TH>
*For the frame and parting edges, the color and texture variations of TH <MONO WHITE> for the HB series are available. *For 0S, 1S, 2S, 3S, 4S, and 5S, only precious wood texture variations are available.
<NS> <NK> <NT>
*For the frame and parting edges, the color and texture of
TH <MONO WHITE> for the HP series is available.
4C3C
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
Interior Door Made In Japan
JP Series
HP Series
Base materialSurfaceStructureFormaldehyde regulations
▷▷▷▷
MDFOlefin/polysand sheet/mirror surface coatingFlush constructionF4-rank according to Labeling Guidelines for Housing Components
S p e c i f i c a t i o n s ( D o o r )
Base materialSurfaceFormaldehyde regulations
▷▷▷
MDF (Plywood or MDF for frame core material)Olefin sheet laminationUnregulated parts*
S p e c i f i c a t i o n s ( F r a m e a n d P a r t i n g E d g e s )
*Although these parts are not regulated according to Article 20-7 of the Enforcement Ordinance of Construction Standard Law, either some labeling exempted material or JIS/JAS F4-rank material certified by the Minister of Land, Infrastructure, Transport and Tourism is used for interior finishing.
Polysand sheet is a multi-layer sheet with a sandwiched moisture-proof polyethylene resin layer and used as a surface material for our door products. It effectively reduces the warping of a door by suppressing the moisture transfer in and out of the wood fitting that occurs as the indoor temperature and humidity change.
What's polysand sheet?
Base materialSurfaceStructureFormaldehyde regulations
▷▷▷▷
MDFNatural wood plywood coating finishFlush construction (partially solid core)F4-rank according to Labeling Guidelines for Housing Components
C omm o n S p e c i f i c a t i o n s f o r S w i n g / S l i d i n g / H a n g i n g D o o r s ( D o o r )
Base materialSurfaceFormaldehyde regulations
▷▷▷
MDF (Plywood or MDF for frame core material)Olefin sheet laminationUnregulated parts*
C omm o n S p e c i f i c a t i o n s f o r S w i n g / S l i d i n g / H a n g i n g D o o r s ( F r a m e a n d P a r t i n g E d g e s )
*Although these parts are not regulated according to Article 20-7 of the Enforcement Ordinance of Construction Standard Law, either some labeling exempted material or JIS/JAS F4-rank material certified by the Minister of Land, Infrastructure, Transport and Tourism is used for interior finishing.
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
Color and Texture Var iat ion
Color and Texture Var iat ion
Color and Texture Var iat ion
Color and Texture Var iat ion
Color and Texture Var iat ion
01 240600 08 C421
A wide variety of designs and ultimate ease of use fulfill the demand for an ideal door for the whole family.
S7
G5 U8U4K8
Y4
K9
Y8
U0G1
Y5
D1
S5
D2
S6
D3 D4
Y1
D5 D6 D8
41 46 5548 76 79G7
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
46
HB Series
Base materialSurfaceStructureFormaldehyde regulations
▷▷▷▷
MDFPolysand sheet laminationFlush construction (partially solid core)F4-rank according to Labeling Guidelines for Housing Components
S p e c i f i c a t i o n s ( D o o r )
Base materialSurfaceFormaldehyde regulations
▷▷▷
MDF (Plywood or MDF for frame core material)Olefin sheet laminationUnregulated parts*
S p e c i f i c a t i o n s ( F r a m e a n d P a r t i n g E d g e s )
*Although these parts are not regulated according to Article 20-7 of the Enforcement Ordinance of Construction Standard Law, either some labeling exempted material or JIS/JAS F4-rank material certified by the Minister of Land, Infrastructure, Transport and Tourism is used for interior finishing.
Polysand sheet is a multi-layer sheet with a sandwiched moisture-proof polyethylene resin layer and used as a surface material for our door products. It effectively reduces the warping of a door by suppressing the moisture transfer in and out of the wood fitting that occurs as the indoor temperature and humidity change.
What's polysand sheet?
* The performance values and the certification labels are based on the Japanese test method and standards.* DAIKEN CORPORATION does not guarantee that the products listed here conform to the laws and regulations of the country or region where they are being used.
*For MK, all products are produced on order.
Color and Texture Var iat ion
<WH> <ML> <MA>
<MT> <MW> <MK>
Interior Door
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
47
Made In China
Standard Series
RM Series
Base materialFront surfaceStructure
▷▷▷
MDFPVC sheet laminationFlush construction/Wood framing
S p e c i f i c a t i o n s ( D o o r )
Base materialFront surface
▷▷
MDFPVC sheet lamination
Specifications (Frame and Parting Edges)
Base materialFront surfaceStructure
▷▷▷
MDFOlefin sheet laminationFlush construction/Wood framing
S p e c i f i c a t i o n s ( D o o r )
Base materialFront surface
▷▷
MDFOlefin sheet lamination
Specifications (Frame and Parting Edges)
W1
<WH>
<KD>
<BD>
<MH>
<WU>
<MT>
<BR> <TE> <BH> <BV>
41
48
U3
W5
W7
45
D4
K2
3B
W5
44F
56
D8
1B
W2
42
55
D7
W6
W8
46
D5
4B
W9
46F
D6
W6
45F
D3
K1
2B
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
Other recommended products
Pet door
Pets can safely come and go even when the main door is closed. Pet owners don't have to open and close the door frequently for their pets.
Door with Transom
Folding door
Hanging door
A small wicket door for pets
is built in this door. This pet
door allows animals to enter
and exit by themselves.
The passage of air is ensured
while protecting privacy.
This door opens and closes with ease. It is suitable for various spaces such as
a compact space. It also can be used as an entrance door to the kitchen, or
wide partition between rooms.
This type of door is optimal for
a compact space such as
restroom and walk-in closet.
The clearance required to
open/close a folding door is
approx. 1/3 of that for general
hinged doors. The folding
doors may give additional
spaces for a larger washstand
or storage.
Out-set hanging doorThe floor flatness can be ensured because no rail is installed on the floor. The barrier-free flat
floor enables easy cleaning and wheelchair access. It also improves the safety for residents,
especially children and elderly people.
Latch
Handle
The Rakura-Close parts on both ends
On-floor end stoppers
The hinged door's frame located on the inside corner was left as it was, and the new sliding door was installed on the frame. By using the existing vertical frame, the inside corner between the door and wall can be neatly finished.
Opening Hang the door and correct a tilt to finish.
Attach the outside corner fitting.
Install the on-floor end stoppers.
Install the rail for the out-set hanging door.
Interior Door
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
49
Made In Indonesia
Swing Door Features
❶ Lever Handle❷ Adjustable Hinge❸ Quiet Latch❹ Smooth Finish
❷
❶❹
❸
2R 2C
❶ Lever Handle ❷ Adjustable Hinge ❸ Quiet Latch
❹ Smooth Finish
<SILVER> Standard
<GOLD>Option
■Short-stroke Lever Handle
Opening or closing the door requires only rotating the handle approximately 10 degrees, compared to 30 degrees with the conventional lever handle.This is convenient because you can open and close doors easily even when your hands are full and recommended also for the elderly and those with weak physical strength.
All types of doors include a quiet latch as standard to reduce the sound of opening and closing the door.
All doors have smooth rounded corners to ensure safety.
■Up and Down Adjustment
Rotate the top of the lower hinge barrel on the door with a Phillips head screwdriver to adjust the vertical clearance between the door and the frame within a range of 6 mm.
Swing door damper pulls in the door slowly to suppress the slamming sound when closing the door.
■Left and Right Adjustment
Rotate the screws in the center of each hinge plate on the frame with a Phillips head screwdriver to adjust the horizontal clearance between the door and the frame within a range of 5 mm.
■Front and Back Adjustment
Adjust the clearance between the door and the door stopper within a range of 3 mm.
■Lock Types
As standard, our single swing doors have a passage lock, while bathroom doors have an indicator lock. The standard lock can be optionally changed to a passage lock, privacy lock, indicator lock, or simple cylinder lock.
Our doors include easy-to-hang door hinges for quick installation. Align the barrel of the lower hinge plate on the door with the pivot shaft of the lower hinge plate on the frame and lower the door (Photo ①). While pulling down the pivot shaft of the upper hinge plate on the door, align its barrel with the barrel of the upper hinge plate on the frame and release the pivot shaft. Lower the special cover on the upper hinge plate on the door to complete hanging the door (Photo ②).
Passage LockAttached as standard to single swing doors/double doors with different size leafs
Privacy LockRecommended for bedrooms and private rooms
Indicator LockAttached as standard to bathroom doors
+ Swing Door Damper (Option)
Photo① Photo②
10°
MDF
Ceiling
Flooring
Interior Door
Cabinet
Wall
Building Acoustic
sOthers
RA Series
NW Series
Design
"Uzukuri" is a traditional Japanese wood surface finishing technique to produce a nicely raised grain texture. The RA series uses an "Uzukuri-like"
surface sheet to reproduce in reality the feel and texture inherent to natural wood, such as a unique three-dimensional effect with subtle shadows
created by changing light and the feel of a soft touch.
Base materialSurfaceStructure
▷▷▷
PlywoodPVC sheet laminationFlush construction
S p e c i f i c a t i o n s ( D o o r )
Base materialSurface
▷▷
Preservative-treated laminated woodPVC sheet lamination
S p e c i f i c a t i o n s ( F r a m e a n d P a r t i n g E d g e s )
*The base material of parting edges is falcata plywood.
00
41
D3
Y4
6D
D6
17
U8
01
D4
D1
C4
D2
24
06
08
<TD>
<WH07>
<TG>
<WH09>
<MF>
<Black>
<MT>
<Green>
<ML>
<Purple>
<WG> <WW05>