Engine Silencing Solutions - Industrial Exhaustindustrialexhaust.com/catalogues/puck_silencers.pdf · silencers for a multitude of applications suitable for diesel, gas and gaseous

Engine Silencing Solutions

25 Years of Experience in the Power-Gen, Off-Highway, Industrial, and Marine Industries

Manufactured by: EM PRODUCTS® Phillips & Temro Industries LITEC01-3200 • 3200-001

Phillips & Temro Industries • EM Products® Division • Prior Lake, MN 55372 • phone (952) 440-9200 • fax (952) 440-3400 • www.phillipsandtemro.com

Contact Information

Engine Exhaust Silencers and Accessories Manufacturing Facilities

Cold Weather Starting, Comfort, and Emissions Control Products Manufacturing Facilities

Phillips & Temro Industries, Ltd.100 Paquin RoadWinnipeg, MB R2J 3V4 CanadaPh# 204-654-6296 Fax# 204-661-2639

EM Products DivisionPhillips & Temro Industries5380 Cottonwood LanePrior Lake, MN 55372Ph# 952-440-9200Fax# 952-440-3400

Phillips & Temro Industries, Ltd.100 Paquin RoadWinnipeg, MB R2J 3V4 CanadaPh# 1-800-328-6108Fax# 952-941-2285

Phillips & Temro Industries9700 W 74th StreetEden Prairie, MN 55344Ph# 952-941-9700 Fax# 952-941-2285

Visit us at www.phillipsandtemro.com

COWL® and EM Products® are a registered trademark of Phillips & Temro Industries, Inc. We reserve the right to change specifications appearing without incurring an obligation for equipment previously or subsequently sold. Dimensions and weights are nominal and may vary slightly with production models.

Local Sales Representative / Distributor

Page 2

Phillips & Temro Industries Silencer Division is a comprehensive manufacturer of industrial silencers for a multitude of applications suitable for diesel, gas and gaseous engines. We cover a size range of engine silencing from as small as 20 horsepower up to 10,000 horsepower. Today, we serve leading manufacturers and distributors in various markets including Power Generation, Off-Highway and Industrial Mobile equipment, Commercial Marine and Gas Compression.

Phillips & Temro is a leader in these markets because we offer a full range of standardized silencers and accessories as well as custom engineered sound attenuation solutions to meet our customer’s requirements. Our engineering staff within the Silencer Division is fully capable to design and manufacture exhaust systems to a high level of performance through computer system modeling, analysis and testing.

Our silencers are designed and developed utilizing a full complement of computer generated models and acoustic performance analysis tools. These software tools together with bench testing data collection allow our engineering team to accurately design high performing silencing systems.


Serving Your Complete System Needs

Page 3

CONTENTS PAGE #

Cylindrical Industrial - JI Series 6Residential - JR Series 7Critical - JC Series 8Hospital - JH Series 9 Tandem LPC Series 10Tandem LPH Series 11

Low Pressure Drop Residential - Low Pressure TAU Series 12Critical - Low Pressure TBU Series 13

Disk Critical - DCK2 Series 14Hospital - DHK Series 15

Disk - High Pressure Series Critical - High Pressure DCP2 Series 16Hospital - High Pressure DHP Series 17

Spark Arresting Industrial - SSU Series 18Residential - SRU Series 19Critical - SCU Series 20Hospital - SHU Series 21Industrial - ATEX SSA Series 22Residential - ATEX SRA Series 23 Critical - ATEX SCA Series 24Hospital - ATEX SHA Series 25Industrial - SAU Series 26Critical - Disk DCS Series 27Hospital - Disk DHS Series 28

ACCESSORIES Rain Guards and Caps Rainguards – Model RGF 29Rainguards – Model RGS 29Pipe Raincaps – Model RCP 30Tube Raincaps – Model RCT 30

Elbows 90° Short Radius Tube 3190° Short Radius Tube

With Flange One End 32Outlet Extension – Straight Tube ANSI

Flange Both Ends 33

Flanges 125/150# ANSI – Model PFL 34125/150# ANSI – Model TFL 35Single Reducing Plate – Model REFL 36Double Reducing Plate – Model DREFL 37Cast Iron Screwed – Model FLT 38Caterpillar – Model CAFL 39Detroit Diesel / Mitsubishi– Model DFL 40Cummins / Onan – Model CUFL 41

Mounting Bands Round – RMB Model 42Oval – OMB Model 42

Gaskets Ring Gaskets and Gasket Kits 43Ring Gaskets and Gasket Kits – 44

Caterpillar, Cummins, Detroit Diesel / MTU

Flex Connectors Male NPT / Male NPT 45Male NPT / Slotted Cuff 4520 Degree Lip Flange / Male NPT 46Slotted Cuff / Slotted Cuff 46Flange / Flange 47Flange / Male NPT 47Flange / Slotted Cuff 48Flange / Female NPT 48Flange / 20 Degree Lip Flange 49Flange / Flanged 90° Elbow 49Male NPT / Flanged 90° Elbow 50Female NPT / Flanged 90° Elbow 50

Mounting Supports Type A and B Mounting Legs 51Type D Vertical Shell Lug Supports 52Type E Horizontal Shell Lug Supports 53Type F Horizontal Saddle Supports 54

Other Sure Seal Clamps 55Explosion Relief Covers 56Inspection Ports 57Wall Thimbles 58

Wye Connector Cummins 59-60Caterpillar 61Detroit 62-65

Limited Warranty 68

TABLE OF CONTENTS



1

2

3

7

4

5

6

7

2

71 3 7

4

6

5

5

6

4

731

7

2

Engine Exhaust Silencer & Accessories:

1. Silencer2. Flex Connection3. Mounting Band4. Rain Cap5. Mitered Exhaust6. Elbows7. Flange/Gasket

Exhaust System Components:

•EnginetoSilencer:A321stainlesssteel,annularcorrugated flexible exhaust hose shall be used in between the engine outlet connection and the silencer inlet connection.

•SilencerExhaustPipe:Theexhausttailpipeextending from the silencer outlet shall use the minimum amount of elbows (90° and 45°) and straight pipe to stay within the manufacturers maximum allowable back pressure.

•SilencerandPipingSupports:Thesilencerandpiping system shall be mounted so that its weight is not supported by the engine. When at all possible, a vibration isolating type mounting support shall be used.

•ExhaustPipeTermination:Theexhaustpipeextending from the silencer shall use a rain cap or mitered exhaust with bird screen at the end of each exhaust run to prevent rain, snow, birds, debris, etc. from entering the engine exhaust system when the engine is not running.

The total exhaust system when at all possible, shall be the product of a single manufacture. This will insure the best form, fit and function during exhaust system installation and operations. The total exhaust system includes the silencer, silencer mounting supports, flex connector and accessories. Where applicable, the exhaust system components shall be supplied with a 1200°satinblackfinish.WhenaspecifieddBAlevelisrequired for a certain distance, please consult silencer manufacturer for correct silencer model and design.

Single Silencer with Single Inlet

Single Silencer with Wye Connection

Dual Silencers with Single Inlet

Page 4



Applications

•PowerModules•MarineEngineRooms•Drop-OverEnclosures•SpaceLimitedApplications

Consult your sales representative or the factory for various construction options:

•Specificinlet/outletconfigurationsandorientations

•Flushmountedflanges

•Flangeswithweldnuts

• Integralroofplatedesign

•Comprehensivelineofexhaustaccessories

•Stainlesssteelconstruction

• InternalThermalInsulation–Top,BottomandSideWalls

•AcousticallyEngineeredtoObtainSoundPressureObjectives

•EffectiveNoiseReductionforLimitedSpaceApplications

Disk Silencer* with Dual Bottom Inlet/Top Outlet

*Shown with Optional Accessories

Disk Silencer* with Single Bottom Inlet/Side Outlet Wye Option

*Shown with Optional Accessories

Page 5

0

5

10

15

20

25

30

63 1252 50 500 1000 2000 4000 8000OCTAVE BAND CENTER FREQUENCY (Hz)

ATTE

NU

ATIO

N(d

B)


Engine Exhaust Silencers — Model “JI” SeriesIndustrial Grade

End Inlet/End Outlet

A B

D

Side Inlet/End Outlet

A

E

B

F

C

JIE-02-300060 2 6 24 12

JIE-25-300061 2.5 8 24 18

JIE-03-300062 3 8 25 20

JIE-35-300063 3.5 10 31 30

JIE-04-300064 4 10 32 31

JIE-05-300065 5 12 44 45

JIE-06-300066 6 12 44 50

JIE-08-300067 8 18 56 120

JIE-10-300068 10 22 72 180

JIE-12-300069 12 26 72 250

JIE-14-300070 14 30 84 375

JIE-16-300071 16 36 100 470

JIE-18-300072 18 42 104 1155

JIE-20-300073 20 48 103 1360

Part Number A B D WT

JIS-02-400090 2 6 22 5.5 3.0 12

JIS-25-400091 2.5 8 22 6.5 3.7 18

JIS-03-400092 3 8 22 7 4.2 20

JIS-35-400093 3.5 10 29 8 5 30

JIS-04-400094 4 10 29.5 8.5 5.5 31

JIS-05-400095 5 12 41.6 10 7.6 50

JIS-06-400096 6 12 41.6 10 7.6 50

JIS-08-400097 8 18 54.5 13 10.5 120

JIS-10-400098 10 22 69 15 15 180

JIS-12-400099 12 26 69.5 17 17 250

JIS-14-400100 14 30 82 19 20 375

JIS-16-400101 16 36 97 22 23 470

JIS-18-400102 18 42 101 25 26.5 1155

JIS-20-400103 20 48 101.5 28 26 1360

Part Number A B C E F WT

Note:3.5-inchandsmallerstandardwithmaleNPTconnections;4.0-inchandlargerstandardwith150#ANSIdrilledplateflangeconnections.Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.

Representative Attenuation Curvefor “JI” Series Silencers

•Typicalreduction=12–18dB

•Aluminized/carbonsteelconstruction

•Stainlesssteelconstructionavailable

•Contactfactoryforcustomfitapplications

Page 6

0

5

10

15

20

25

30

35

40


ATTE

NU

ATIO

N(d

B)


Engine Exhaust Silencers — Model “JR” SeriesResidential Grade

End Inlet/End Outlet Side Inlet/End Outlet

JRE-02-500071 2 6 30 17

JRE-25-500072 2.5 8 30 24

JRE-03-500073 3 8 31 26

JRE-35-500074 3.5 10 43 42

JRE-04-500075 4 10 44 44

JRE-05-500076 5 12 56 75

JRE-06-500077 6 12 56 75

JRE-08-500078 8 18 68 155

JRE-10-500079 10 22 84 220

JRE-12-500080 12 26 96 325

JRE-14-500081 14 30 120 505

JRE-16-500082 16 36 136 870

JRE-18-500083 18 42 138 1280

JRE-20-500084 20 48 143 1700


JRS-02-600181 2 6 28 5.5 3 17

JRS-25-600182 2.5 8 28.5 6.5 3.6 24

JRS-03-600183 3 8 29 7 4.1 26

JRS-35-600184 3.5 10 41 8 5 42

JRS-04-600185 4 10 41.5 8.5 5.5 44

JRS-05-600186 5 12 54 10 6.6 75

JRS-06-600187 6 12 54 10 7.6 75

JRS-08-600188 8 18 66.5 13 10.5 155

JRS-10-600189 10 22 81 15 15 220

JRS-12-600190 12 26 93.5 17 17.5 325

JRS-14-600191 14 30 118 19 20 505

JRS-16-600192 16 36 133 22 23 870

JRS-18-600193 18 42 135.5 25 31.5 1280

JRS-20-600211 20 48 139 28 35 1700



Representative Attenuation Curvefor “JR” Series Silencers





A B

D

A

E

B

F

C

Page 7

0

5

10

15

20

25

30

35

40

45


ATTE

NU

ATIO

N(d

B)


Engine Exhaust Silencers — Model “JC” Series Critical Grade


JCE-02-100071 2 6 42 29

JCE-25-100072 2.5 8 42 38

JCE-03-100073 3 8 43 43

JCE-35-100074 3.5 10 55 72

JCE-04-100075 4 10 56 72

JCE-05-100076 5 12 68 81

JCE-06-100077 6 12 68 84

JCE-08-100078 8 18 92 249

JCE-10-100079 10 22 108 370

JCE-12-100080 12 26 120 506

JCE-14-100081 14 30 132 743

JCE-16-100082 16 36 160 1050

JCE-18-100083 18 42 174 1750

JCE-20-100084 20 48 203 2550


JCS-02-200381 2 6 39.75 5.5 7.25 29

JCS-25-200382 2.5 8 39.88 6.5 7.38 38

JCS-03-200383 3 8 40.62 7 7.38 43

JCS-35-200384 3.5 10 53.0 8 9.25 72

JCS-04-200385 4 10 53.5 8.5 9.25 72

JCS-05-200386 5 12 65.62 10 12.25 81

JCS-06-200387 6 12 65.62 10 12.25 84

JCS-08-200388 8 18 90.50 13 16.5 249

JCS-10-200389 10 22 105.0 15 20.0 370

JCS-12-200390 12 26 117.5 17 21.5 506

JCS-14-200391 14 30 130.0 19 23.0 743

JCS-16-200392 16 36 157.0 22 29.0 1050

JCS-18-200393 18 42 171.5 25 33.0 1750

JCS-20-200467 20 48 199 27 36.0 2818



Representative Attenuation Curvefor “JC” Series Silencers





A B

D

A

C

F

E

B

Page 8

05

101520253035404550


ATTE

NU

ATIO

N(d

B)


Engine Exhaust Silencers — Model “JH” Series Hospital Grade


JHE-02-105030 2 10 44 55

JHE-25-105031 2.5 12 46 75

JHE-03-105032 3 12 46 75

JHE-35-105033 3.5 14 60 110

JHE-04-105034 4 14 60 115

JHE-05-105035 5 18 68 180

JHE-06-105036 6 18 68 185

JHE-08-105037 8 26 96 460

JHE-10-105038 10 30 110 680

JHE-12-105039 12 36 126 855

JHE-14-105040 14 42 138 1370

JHE-16-105041 16 42 162 1600

JHE-18-105042 18 48 205.5 2650

JHE-20-105051 20 60 220 4500


JHS-02-205170 2 10 41.5 8.5 5.5 55

JHS-25-205171 2.5 12 42.5 10 7.75 75

JHS-03-205172 3 12 42.5 10 7.75 75

JHS-35-205173 3.5 14 56.5 11 9.5 110

JHS-04-205174 4 14 56.5 11 9.5 115

JHS-05-205175 5 18 66.5 13 10.5 180

JHS-06-205176 6 18 66.5 13 10.5 185

JHS-08-205177 8 26 93.5 17 17.5 460

JHS-10-205178 10 30 108 19 20 680

JHS-12-205179 12 36 122 22 23 855

JHS-14-205180 14 42 135 25 24 1370

JHS-16-205181 16 42 159 25 28 1600

JHS-18-205182 18 48 201.5 28 38 2650

JHS-20-205219 20 60 216 34 40 4500



Representative Attenuation Curvefor “JH” Series Silencers





A B

D

A

C

F

E

B

Page 9

0

10

20

30

40

50

60


ATTE

NU

ATIO

N(d

B)


Tandem — “LPC” SeriesCritical Grade

LPC-04-200279 4.0 12.0 40.0 10.0 6.0 38.0 130

LPC-05-200280 5.0 14.0 53.0 10.0 7.0 42.0 196

LPC-06-200281 6.0 16.0 53.0 11.0 7.5 50.0 254

LPC-08-200282 8.0 16.0 53.0 11.0 8.5 54.0 275

LPC-10-200283 10.0 20.0 67.0 13.0 10.0 66.0 540

LPC-12-200284 12.0 22.0 67.0 15.0 11.5 74.0 645

LPC-14-200285 14.0 26.0 68.0 17.0 13.0 86.0 1010

LPC-16-200286 16.0 28.0 81.0 18.0 14.0 94.0 1500

Part Number A B D H K L M WT

Note:Standardwith150#ANSIdrilledplateflangeconnections.Dimensionsininches,weightsinpounds.Dimensionsandweightsarenominaland may vary slightly with production models.

Representative Attenuation Curvefor “LPC” Series Silencers


• Internalthermal/acousticinsulation

•Lowprofile




W

C

SECONDARY

PRIMARY

D

A

B

F

Page 10

0

10

20

30

40

50

60


ATTE

NU

ATIO

N(d

B)


Tandem — “LPH” SeriesHospital Grade

LPH-04-205101 4.0 12.0 52.0 10.0 6.0 38.0 168

LPH-05-205102 5.0 14.0 76.5 10.0 7.0 42.0 276

LPH-06-205103 6.0 16.0 65.0 11.0 7.5 50.0 315

LPH-08-205104 8.0 16.0 77.0 11.0 8.5 54.0 390

LPH-10-205105 10.0 20.0 90.0 13.0 10.0 66.0 720

LPH-12-205106 12.0 22.0 91.0 15.0 11.5 74.0 885

LPH-14-205107 14.0 26.0 104.0 17.0 13.0 86.0 1350

LPH-16-205108 16.0 28.0 129.0 18.0 14.0 94.0 2000



Representative Attenuation Curvefor “LPH” Series Silencers



•Lowprofile




W

C

SECONDARY

PRIMARY

D

A

B

F

Page 11

0

5

10

15

20

25


ATTE

NU

ATIO

N(d

B)


Low Pressure Drop — “TAU” SeriesResidential Grade


TAUE-04-980999 4 8 36 22

TAUE-05-980400 5 10 51 71

TAUE-06-980401 6 10 60 75

TAUE-08-980265 8 14 66 140

TAUE-10-980403 10 16 70 180

TAUE-12-980404 12 18 70 225

TAUE-14-980405 14 20 88 340

TAUE-16-980406 16 24 108 480

TAUE-18-980407 18 26 108 540

TAUE-20-980408 20 28 132 840

TAUE-22-980409 22 36 136 1140

TAUE-24-980410 24 36 196 1600


TAUS-04-980414 4 8 33 9 4 62

TAUS-05-980415 5 10 48 9 4 71

TAUS-06-980416 6 10 57 9 7 75

TAUS-08-980009 8 14 63 11 8 140

TAUS-10-980007 10 16 67 12 10 180

TAUS-12-980188 12 18 67 13 11 225

TAUS-14-980420 14 20 85 14 12 340

TAUS-16-980016 16 24 105 16 14 480

TAUS-18-980422 18 26 105 17 15 540

TAUS-20-981473 20 28 129 18 17 840

TAUS-22-981474 22 36 133 22 19 1140

TAUS-24-981475 24 36 193 22 20 1600



Representative Attenuation Curvefor “TAU” Series Silencers





A B

D

A

C

F

E

B

Page 12

0

5

10

15

20

25

30

35


ATTE

NU

ATIO

N(d

B)


Low Pressure Drop — “TBU” SeriesCritical Grade


TBUE-04-980849 4 10 54 72

TBUE-05-980850 5 10 54 72

TBUE-06-980851 6 12 66 90

TBUE-08-980638 8 14 78 145

TBUE-10-980260 10 16 82 205

TBUE-12-980435 12 22 89 340

TBUE-14-980436 14 26 110 475

TBUE-16-980437 16 26 132 680

TBUE-18-980438 18 36 184 1500

TBUE-20-980439 20 42 198 1800

TBUE-22-980440 22 48 200 2300

TBUE-24-980441 24 54 262 4000


TBUS-04-980445 4 10 51 9 4 72

TBUS-05-980446 5 10 51 9 4 72

TBUS-06-980447 6 12 63 10 5 90

TBUS-08-980448 8 14 75 11 6 145

TBUS-10-980449 10 16 79 12 10 205

TBUS-12-980450 12 22 86 15 11 340

TBUS-14-980451 14 26 107 17 12 475

TBUS-16-980452 16 26 129 17 14 680

TBUS-18-980453 18 36 181 22 18 1500

TBUS-20-980454 20 42 195 25 19 1800

TBUS-22-980455 22 48 197 28 21 2300

TBUS-24-980456 24 54 259 31 22 4000



Representative Attenuation Curvefor “TBU” Series Silencers





A B

D

A

C

F

E

B

Page 13

0

5

10

15

20

25

30

35

40


ATTE

NU

ATIO

N(d

B)

A

D

L

BH


Disk Silencers — “DCK2” SeriesCritical Grade

DCK2-04-200751 4 16.5 27 8 30.50 11 1.00 140

DCK2-05-200752 5 18.0 30 10 33.50 13 1.00 250

DCK2-06-200753 6 19.5 33 12 36.50 15 1.00 310

DCK2-08-200754 8 26.5 47 14 50.50 17 1.00 435

DCK2-10-200755 10 29.5 53 16 56.50 19 1.00 650

DCK2-12-200756 12 34.0 62 18 66.50 21 1.25 925

DCK2-14-200757 14 36.0 66 24 70.50 27 1.25 1090

DCK2-16-200758 16 40.0 74 26 78.50 29 1.25 1500

DCK2-18-200759 18 45.5 85 28 89.50 31 1.25 1890



Representative Attenuation Curvefor “DCK2” Series Silencers


•Internalthermal/acousticinsulation

•Variousinlet/outletconfigurationandorientations available

•Carbonsteelconstruction



Page 14

05

101520253035404550


ATTE

NU

ATIO

N(d

B)


Disk Silencers — “DHK” SeriesHospital Grade

DHK-04-205349 4 20.5 35 8 38.5 11 1.00 200

DHK-05-205350 5 21.5 37 12 40.5 15 1.00 255

DHK-06-205351 6 23.0 40 12 43.5 15 1.00 310

DHK-08-205352 8 29.5 53 14 56.5 17 1.00 630

DHK-10-205353 10 32.5 59 16 62.5 19 1.00 855

DHK-12-205354 12 38.5 71 20 75.5 23 1.25 1245

DHK-14-205355 14 39.0 72 24 76.5 27 1.25 1300

DHK-16-205356 16 41.0 76 28 80.5 31 1.25 1590

DHK-18-205357 18 46.5 87 30 91.5 33 1.25 2045



Representative Attenuation Curvefor “DHK” Series Silencers



•Variousinlet/outletconfigurationandorientations available

•Carbonsteelconstruction



A

D

L

BH

Page 15

0

5

10

15

20

25

30

35

40


ATTE

NU

ATIO

N(d

B)


Disk Silencers - “DCP2” High Pressure SeriesCritical Grade

DCP2-04-90010563 4 16.5 27 8 30.5 11 1.00 140

DCP2-05-90010564 5 18.0 30 10 33.5 13 1.00 250

DCP2-06-90010565 6 19.5 33 12 36.5 15 1.00 310

DCP2-08-90010566 8 26.5 47 14 50.5 17 1.00 520

DCP2-10-90010567 10 29.5 53 16 56.5 19 1.00 750

DCP2-12-90010568 12 34.0 62 18 66.5 21 1.25 925

DCP2-14-90010569 14 36.0 66 24 70.5 27 1.25 1090

DCP2-16-90010570 16 40.0 74 26 78.5 29 1.25 1500

DCP2-18-90010571 18 45.5 85 28 89.5 31 1.25 1890



Representative Attenuations Curvefor “DCP2” Series Silencers

•Typicalreduction=22-36dB•Internalthermal/acousticinsulation•Variousinlet/outletconfigurationandorientations•Carbonsteelconstruction•Stainlesssteelconstructionavailable•Contactfactoryforcustomfitapplications•Pressureratedto1.5psi•Additionalpressuresensorsandreliefvalves

recommended for below water discharge in marine applications to ensure pressure rating is not exceeded

Page 16

A

D

L

BH

05

101520253035404550


ATTE

NU

ATIO

N(d

B)


Disk Silencers - “DHP” High Pressure SeriesHospital Grade

DHP-04-90010572 4 20.5 35 8 38.5 11 1.00 200

DHP-05-90010573 5 21.5 37 12 40.5 15 1.00 255

DHP-06-90010574 6 23.0 40 12 43.5 15 1.00 400

DHP-08-90010575 8 29.5 53 14 56.5 17 1.00 750

DHP-10-90010576 10 32.5 59 16 62.5 19 1.00 925

DHP-12-90010577 12 38.5 71 20 75.5 23 1.25 1245

DHP-14-90010578 14 39.0 72 24 76.5 27 1.25 1300

DHP-16-90010579 16 41.0 76 28 80.5 31 1.25 1590

DHP-18-90010580 18 46.5 87 30 91.5 33 1.25 2045



Representative Attenuations Curvefor “DHP” Series Silencers

•Typicalreduction=26-43db•Internalthermal/acousticinsulation•Variousinlet/outletconfigurationandorientations•Carbonsteelconstruction•Stainlesssteelconstructionavailable•Contactfactoryforcustomfitapplications•Pressureratedto1.5psi•Additionalpressuresensorsandreliefvalves

recommended for below water discharge in marine applications to ensure pressure rating is not exceeded

Page 17

A

D

L

BH

0

5

10

15

20

25

30


ATTE

NU

ATIO

N(d

B)

A

E

B

F

C


Spark Arrestors — “SSU” SeriesIndustrial Grade


SSUE-04-980338 4 14 32 82

SSUE-05-980218 5 14 42 102

SSUE-06-980340 6 18 49 162

SSUE-08-980341 8 22 50 245

SSUE-10-980342 10 26 63 330

SSUE-12-980343 12 30 76 555

SSUE-14-980344 14 36 78 825

SSUE-16-980345 16 42 81 860

SSUE-18-980346 18 48 100 1390

SSUE-20-980347 20 48 118 1540

SSUE-22-980348 22 54 120 1900

SSUE-24-980349 24 60 132 2270


SSUS-04-981189 4 14 30.25 11 5.50 82

SSUS-05-981190 5 14 39.75 11 7.00 102

SSUS-06-981191 6 18 45.50 13 8.25 162

SSUS-08-981192 8 22 46.50 17 9.75 245

SSUS-10-981193 10 26 59.50 19 11.50 330

SSUS-12-981194 12 30 73.00 20 13.25 555

SSUS-14-981195 14 36 75.50 24 15.00 825

SSUS-16-981196 16 42 79.00 27 16.50 860

SSUS-18-981197 18 48 97.00 33 19.00 1390

SSUS-20-981198 20 48 115.00 33 20.00 1540

SSUS-22-981199 22 54 116.50 36 22.00 1900

SSUS-24-981200 24 60 129.50 39 23.50 2270



Representative Attenuation Curvefor “SSU” Series Silencers





•Typeapprovalinaccordancewith DNV-OS-D101 and EN 1834-1

A B

D

Page 18

0

5

10

15

20

25

30

35

40


ATTE

NU

ATIO

N(d

B)

A

E

B

F

C


Spark Arrestors — “SRU” SeriesResidential Grade


SRUE-04-980353 4 14 42 102

SRUE-05-980354 5 14 66 152

SRUE-06-980355 6 18 61 202

SRUE-08-980356 8 22 73 325

SRUE-10-980357 10 26 93 505

SRUE-12-980358 12 30 112 755

SRUE-14-980359 14 36 108 1005

SRUE-16-980360 16 42 111 1115

SRUE-18-980361 18 48 118 1565

SRUE-20-980362 20 48 142 1805

SRUE-22-980363 22 54 144 2195

SRUE-24-980364 24 60 144 2425


SRUS-04-981304 4 14 39.50 11 5.50 102

SRUS-05-981305 5 14 63.50 11 7.00 152

SRUS-06-981306 6 18 57.50 13 8.25 202

SRUS-08-981307 8 22 69.50 17 9.75 325

SRUS-10-981308 10 26 89.50 19 11.50 505

SRUS-12-981309 12 30 109.00 20 13.25 755

SRUS-14-981310 14 36 105.50 24 15.00 1005

SRUS-16-981311 16 42 109.00 27 16.50 1115

SRUS-18-981406 18 48 115.00 33 19.00 1565

SRUS-20-981312 20 48 139.00 33 20.00 1805

SRUS-22-981313 22 54 140.50 36 22.00 2195

SRUS-24-981314 24 60 142.5 39 23.5 2425



Representative Attenuation Curvefor “SRU” Series Silencers






A B

D

Page 19

05

101520253035404550


ATTE

NU

ATIO

N(d

B)

A

E

B

F

C


Spark Arrestors — “SCU” SeriesCritical Grade


SCUE-04-981416 4 14 58.50 120

SCUE-05-981417 5 14 70.50 150

SCUE-06-981418 6 18 72.00 210

SCUE-08-981419 8 22 85.00 295

SCUE-10-981420 10 26 110.00 465

SCUE-12-981421 12 30 123.00 700

SCUE-14-981422 14 36 137.00 900

SCUE-16-981423 16 42 139.00 1400

SCUE-18-981424 18 48 141.00 1225

SCUE-20-981425 20 48 153.00 1320

SCUE-22-981426 22 54 155.00 1700

SCUE-24-981427 24 60 168.00 2270


SCUS-04-981431 4 14 55.50 11.00 6.50 120

SCUS-05-981432 5 14 68.00 11.00 7.00 150

SCUS-06-981433 6 18 68.50 13.00 8.25 210

SCUS-08-981434 8 22 81.50 17.00 9.75 295

SCUS-10-981435 10 26 106.50 19.00 11.50 465

SCUS-12-981436 12 30 120.00 20.00 13.25 700

SCUS-14-981437 14 36 134.50 24.00 15.00 900

SCUS-16-981438 16 42 137.00 27.00 16.50 1400

SCUS-18-981439 18 48 138.00 33.00 19.00 1225

SCUS-20-981440 20 48 150.00 33.00 20.00 1320

SCUS-22-981441 22 54 151.50 36.00 22.00 1700

SCUS-24-981442 24 60 166.50 39.00 23.50 2270



Representative Attenuation Curvefor “SCU” Series Silencers






A B

D

Page 20

0

10

20

30

40

50

60


ATTE

NU

ATIO

N(d

B)

A

E

B

F

C


Spark Arrestors — “SHU” SeriesHospital Grade


SHUE-04-981446 4 16 59.00 150

SHUE-05-981447 5 18 72.00 195

SHUE-06-981448 6 18 80.00 212

SHUE-08-981449 8 26 96.00 470

SHUE-10-981450 10 30 110.00 700

SHUE-12-981451 12 36 126.00 870

SHUE-14-981452 14 42 138.00 1380

SHUE-16-981453 16 42 163.00 1620

SHUE-18-981454 18 48 205.50 2920

SHUE-20-981455 20 60 220.00 4950

SHUE-22-981456 22 60 220.00 4970

SHUE-24-981457 24 66 244.00 6670


SHUS-04-981461 4 16 56.00 12.00 6.75 150

SHUS-05-981462 5 18 69.00 13.00 7.75 195

SHUS-06-981463 6 18 78.00 13.00 8.25 212

SHUS-08-981464 8 26 93.50 19.00 10.50 40

SHUS-10-981465 10 30 108.00 20.00 12.25 700

SHUS-12-981466 12 36 122.00 24.00 14.50 870

SHUS-14-981467 14 42 135.00 27.00 15.50 1380

SHUS-16-981468 16 42 159.00 27.00 16.50 1620

SHUS-18-981469 18 48 201.50 33.00 19.00 2920

SHUS-20-981470 20 60 216.00 39.00 21.50 4950

SHUS-22-981471 22 60 216.00 39.00 22.50 4970

SHUS-24-981472 24 66 241.00 42.00 24.00 6670



Representative Attenuation Curvefor “SHU” Series Silencers

•TypicalReduction=32–38dB

•Aluminized/CarbonSteelConstruction

•StainlessSteelConstructionAvailable

•ContactFactoryforCustomFitApplications


A B

D

Page 21

0

5

10

15

20

25

30


ATTE

NU

ATIO

N(d

B)


ATEX Spark Arrester - “SSA” Series, Industrial GradeEN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000


SSAE-04-90008888 4 14 32 82

SSAE-05-90008889 5 14 42 102

SSAE-06-90008890 6 18 49 162

SSAE-08-90008891 8 22 50 245

SSAE-10-90008892 10 26 63 330

SSAE-12-90008893 12 30 76 555

SSAE-14-90008894 14 36 78 825

SSAE-16-90008895 16 42 81 860

SSAE-18-90008896 18 48 100 1390

SSAE-20-90008897 20 48 118 1540

SSAE-22-90008898 22 54 120 1900

SSAE-24-90008899 24 60 132 2270

Part Number A B D WT Part Number A B C E F WT


Representative Attenuations Curvefor “SSA” Series Silencers

•Typicalreduction=12-18dB

•316stainlesssteelconstruction

•TypeapprovalinaccordancewithEN1834parts1,2&3tocomplywithATEXDirective(European Directive 94/9/EC) requirements


Page 22

SSAS-04-90008904 4 14 30.25 11 5.50 82

SSAS-05-90008905 5 14 39.75 11 7.00 102

SSAS-06-90008906 6 18 45.50 13 8.25 162

SSAS-08-90008907 8 22 46.50 17 9.75 245

SSAS-10-90008908 10 26 59.50 19 11.50 330

SSAS-12-90008909 12 30 73.00 20 13.25 555

SSAS-14-90008910 14 36 75.50 24 15.00 825

SSAS-16-90008911 16 42 79.00 27 16.50 860

SSAS-18-90008912 18 48 97.00 33 19.00 1390

SSAS-20-90008913 20 48 115.00 33 20.00 1540

SSAS-22-90008914 22 54 116.50 36 22.00 1900

SSAS-24-90008915 24 60 129.50 39 23.50 2270

A B

D

E

C

F

BA

0

5

10

15

20

25

30

35

40


ATTE

NU

ATIO

N(d

B)


ATEX Spark Arrester - “SRA” Series, Residential GradeEN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000


SRAE-04-90008920 4 14 42 102

SRAE-05-90008921 5 14 66 152

SRAE-06-90008922 6 18 61 202

SRAE-08-90008923 8 22 73 325

SRAE-10-90008924 10 26 93 505

SRAE-12-90008925 12 30 112 755

SRAE-14-90008926 14 36 108 1005

SRAE-16-90008927 16 42 111 1115

SRAE-18-90008928 18 48 118 1565

SRAE-20-90008929 20 48 142 1805

SRAE-22-90008930 22 54 144 2195

SRAE-24-90008931 24 60 144 2425



Representative Attenuations Curvefor “SRA” Series Silencers





Page 23

SRAS-04-90008936 4 14 39.50 11 5.50 102

SRAS-05-90008937 5 14 63.50 11 7.00 152

SRAS-06-90008938 6 18 57.50 13 8.25 202

SRAS-08-90008939 8 22 69.50 17 9.75 325

SRAS-10-90008940 10 26 89.50 19 11.50 505

SRAS-12-90008941 12 30 109.00 20 13.25 755

SRAS-14-90008942 14 36 105.50 24 15.00 1005

SRAS-16-90008943 16 42 109.00 27 16.50 1115

SRAS-18-90008944 18 48 115.00 33 19.00 1565

SRAS-20-90008945 20 48 139.00 33 20.00 1805

SRAS-22-90008946 22 54 140.50 36 22.00 2195

SRAS-24-90008947 24 60 142.50 39 23.50 2425

A B

D

E

C

F

BA


ATEX Spark Arrester - “SCA” Series, Critical GradeEN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000




Representative Attenuations Curvefor “SCA” Series Silencers





05

101520253035404550


ATTE

NU

ATIO

N(d

B)

Page 24

SCAE-04-90008952 4 14 58.50 120

SCAE-05-90008953 5 14 70.50 150

SCAE-06-90008954 6 18 72.00 210

SCAE-08-90008955 8 22 85.00 295

SCAE-10-90008956 10 26 110.00 465

SCAE-12-90008957 12 30 123.00 700

SCAE-14-90008958 14 36 137.00 900

SCAE-16-90008959 16 42 139.00 1425

SCAE-18-90008960 18 48 141.00 1725

SCAE-20-90008961 20 48 153.00 1820

SCAE-22-90008962 22 54 155.00 1920

SCAE-24-90008963 24 60 168.00 2500

SCAS-04-90008968 4 14 55.50 11 6.50 120

SCAS-05-90008969 5 14 68.00 11 7.00 150

SCAS-06-90008970 6 18 68.50 13 8.25 210

SCAS-08-90008971 8 22 81.50 17 9.75 295

SCAS-10-90008972 10 26 106.50 19 11.50 465

SCAS-12-90008973 12 30 120.00 20 13.25 700

SCAS-14-90008974 14 36 134.50 24 15.00 900

SCAS-16-90008975 16 42 137.00 27 16.50 1425

SCAS-18-90008976 18 48 138.00 33 19.00 1725

SCAS-20-90008977 20 48 150.00 33 20.00 1820

SCAS-22-90008978 22 54 151.50 36 22.00 1920

SCAS-24-90008979 24 60 166.50 39 23.50 2500

A B

D

E

C

F

BA

0

10

20

30

40

50

60


ATTE

NU

ATIO

N(d

B)


ATEX Spark Arrester - “SHA” Series, Hospital GradeEN 1834-1:2000, EN 1834-2:2000, EN 1834-3:2000




Representative Attenuations Curvefor “SHA” Series Silencers





Page 25

SHAE-04-90008984 4.0 16 59.00 150

SHAE-05-90008985 5.0 18 72.00 195

SHAE-06-90008986 6.0 18 80.00 212

SHAE-08-90008987 8.0 26 96.00 470

SHAE-10-90008988 10.0 30 110.00 700

SHAE-12-90008989 12.0 36 126.00 870

SHAE-14-90008990 14.0 42 138.00 1380

SHAE-16-90008991 16.0 42 163.00 1620

SHAE-18-90008992 18.0 48 205.50 2920

SHAE-20-90008993 20.0 60 220.00 4950

SHAE-22-90008994 22.0 60 220.00 4970

SHAE-24-90008995 24.0 66 244.00 6670

SHAS-04-90009000 4.0 16 56.00 12 6.75 150

SHAS-05-90009001 5.0 18 69.00 13 7.75 195

SHAS-06-90009002 6.0 18 78.00 13 8.25 212

SHAS-08-90009003 8.0 26 93.50 19 10.50 470

SHAS-10-90009004 10.0 30 108.00 20 12.25 700

SHAS-12-90009005 12.0 36 122.00 24 14.50 870

SHAS-14-90009006 14.0 42 135.00 27 15.50 1380

SHAS-16-90009007 16.0 42 159.00 27 16.50 1620

SHAS-18-90009008 18.0 48 201.50 33 19.00 2920

SHAS-20-90009009 20.0 60 216.00 39 21.50 4950

SHAS-22-90009010 22.0 60 216.00 39 22.50 4970

SHAS-24-90009011 24.0 66 241.00 42 24.00 6670

A B

D

E

C

F

BA


Spark Arrester “SAU” Series, Industrial Grade

Page 26

With Mnpt/ With Slotted/ Stub Connection Stub Connection A B C D E J G H Weight Part Number Part Number Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Inch / Mm Pounds / Kg

SAU-15-980330 SAU-15-981071 1.5 / 38 6.0 / 152 3.8 / 97 10.38 / 264 1.5 / 38 3.52 / 89 1.9 / 48 3/8 / 9.5 5 / 2.3

SAU-02-980331 SAU-02-981072 2.0 / 51 6.0 / 152 5.1 / 130 10.72 / 272 2.0 / 51 5.62 / 143 2.0 / 51 3/8 / 9.5 6 / 2.7

SAU-25-980332 SAU-25-981073 2.5 / 64 6.6 / 168 6.2 / 157 15.47 / 393 2.5 / 64 6.12 / 155 2.3 / 58 3/8 / 9.5 8 / 3.6

SAU-03-980333 SAU-03-981074 3.0 / 76 7.0 / 178 7.6 / 193 18.00 / 457 3.0 / 76 7.38 / 187 2.5 / 64 3/8 / 9.5 10 / 4.5

SAU-35-980334 SAU-35-981075 3.5 / 89 7.0 / 178 9.0 / 229 20.52 / 521 3.5 / 89 8.62 / 219 2.6 / 66 1/2 / 13 12 / 5.4

SAU-04-980335 SAU-04-981076 4.0 / 102 8.0 / 203 10.6 / 269 22.31 / 567 4.0 / 102 9.12 / 232 3.0 / 76 1/2 / 13 15 / 6.8

SAU-05-980336 SAU-05-981077 5.0 / 127 9.0 / 229 11.8 / 300 24.87 / 632 5.0 / 127 10.18 / 259 3.5 / 89 1/2 / 13 21 / 9.5

SAU-06-980337 SAU-06-981078 6.0 / 152 10.0 / 254 13.3 / 338 26.72 / 679 6.0 / 153 10.24 / 260 4.0 / 102 1/2 / 13 25 / 11.3

Dimensions in Inches/Millimeters, Weight in Pounds/Kilograms

Standard Silencer Application•Exhaustsparkarrestor•Designedformobileandstationary

engines•Recommendedforhazardous

environments

Standard Construction Features•U.SdepartmentofAgriculture(Forest

Service) qualified•TestedbyU.S.ForestServiceandrated

virtually 100% efficient•Aluminizedorstainlesssteelconstruction•SlottedIDinlet/StubODoutlet•Protectivefinishapplied•Canbemountedverticallyorhorizontally

Optional•Completelineofaccessories


Disk Silencer - “DCS” Series - Spark ArrestingCritical Grade

Page 27

DCS-06-90012986 6 19.5 33 12 36.5 16 1.00 200

DCS-08-90012987 8 26.5 47 14 50.5 20 1.00 500

DCS-10-90012988 10 29.5 53 16 56.5 23 1.00 750

DCS-12-90012989 12 34.0 62 18 66.5 26 1.25 1090

DCS-14-90012990 14 36.0 66 24 70.5 34 1.25 1350

DCS-16-90012991 16 40.0 74 26 78.5 35 1.25 1500

DCS-18-90012992 18 45.5 85 28 89.5 38 1.25 1890


Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.

Representative Attenuations Curve for “DCS” Series Silencers

•TypicalReduction=22-36dB

•InternalThermal/AcousticInsulation

•VariousInlet/OutletConfigurationandOrientationsAvailable

•CarbonSteelConstruction



05

10152025303540

63 125 250 500 1000 2000 4000 8000

ATTE

NUA

TIO

N (d

B)

OCTAVE BAND CENTER FREQUENCY (Hz)

KB CM- 4H OLES

ON

DRAINPLUG

NOMD

A

B

SPARKCLEANOUT

H

L


Disk Silencer - “DHS” Series - Spark ArrestingHospital Grade

Page 28

DHS-06-90012993 6 23.0 40 12 43.5 16 1.00 370

DHS-08-90012994 8 29.5 53 14 56.5 20 1.00 600

DHS-10-90012995 10 32.5 59 16 62.5 23 1.00 925

DHS-12-90012996 12 38.5 71 20 75.5 28 1.25 1350

DHS-14-90012997 14 39.0 72 24 76.5 34 1.25 1500

DHS-16-90012998 16 41.0 76 28 80.5 37 1.25 1850

DHS-18-90012999 18 46.5 87 30 91.5 40 1.25 2150


Note: On 14, 16, and 18 inch spark arresting disk silencers, the silencers must have dual inlets or the L dimension will need to be adjusted. Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models.

Representative Attenuations Curve for “DHS” Series Silencers

•TypicalReduction=24-43dB

•InternalThermal/AcousticInsulation

•VariousInlet/OutletConfigurationandOrientationsAvailable

•CarbonSteelConstruction



05

101520253035404550


ATTE

NUA

TIO

N (d

B)

KB CM- 4H OLES

ON

DRAINPLUG

NOMD

A

B

SPARKCLEANOUT

H

L


Accessories Rainguards ~ Model RGF / Model RGS

Standard Features

•Specialflangesavailable


Dimensions in inches, weights in pounds. Dimensions and weights are nominal and may vary slightly with production models. Request certified drawings for exact dimensions.

4.0 RGF-04 021729 13.0 4.0 .083

5.0 RGF-05 021730 14.0 4.0 .083

6.0 RGF-06 021731 15.0 4.0 .083

8.0 RGF-08 021732 17.5 4.0 .083

10.0 RGF-10 021733 20.0 4.0 .109

12.0 RGF-12 021734 23.0 4.0 .109

14.0 RGF-14 021735 25.0 4.0 . 109

16.0 RGF-16 021736 27.5 4.0 .109

Size Model No. Part No. B C Thick

Rainguard – Model RGF Series with ANSI Flange Pattern

4.00 RGS-04 021737 13.0 4.0 .083

4.50 RGS-45 021738 13.0 4.0 .083

5.00 RGS-05 021739 14.0 4.0 .083

5.56 RGS-556 021740 14.0 4.0 .083

6.00 RGS-06 021741 15.0 4.0 .083

6.63 RGS-663 021742 15.0 4.0 .083

8.00 RGS-08 021743 17.5 4.0 .083

8.63 RGS-863 021744 17.5 4.0 .083

10.00 RGS-10 021745 20.0 4.0 .109

10.75 RGS-1075 021746 20.0 4.0 .109

12.00 RGS-12 021747 23.0 4.0 .109

12.75 RGS-1275 021748 23.0 4.0 .109

14.00 RGS-14 021749 25.0 4.0 .109

16.00 RGS-16 021750 27.5 4.0 .109

Size Model No. Part No. B C Thick

Rainguard – Model RGS Series with Slip Fit I.D. Connection

Page 29


Accessories Rain Caps ~ Model RCP / Model RCT

Standard Features

•Pipesizeraincaps•Tubesizeraincaps•Counterbalancedforautomatic

operation•Heavydutyconstruction•1.5inchto6inchsizezincplated•8inchandlargerwith1200°satin

black finish•Reducednoisestyle

Optional Features•Stainlesssteelconstruction•Specialdesign•Specialfinish


Model Part Size of No. No. Exhaust Pipe OD

Pipe Rain Caps - Model RCP

RCT-15 00635 1 1/2

RCT-02 000636 2

RCT-25 000637 2 1/2

RCT-03 000638 3

RCT-35 000639 3 1/2

RCT-04 000640 4

RCT-05 000642 5

RCT-06 000643 6

RCT-08 000644 8

RCT-10 000645 10

RCT-12 000646 12

Model Part Size of No. No. Exhaust Pipe OD

Tube Rain Caps - Model RCT

PIPE /TUB E

O.D.PIPE /TUB E

O.D .

1 1/2” to 6” Size 8” and Larger

Page 30

RCP-15 000636 1 7/8

RCP-02 000637 2 3/8

RCP-25 000638 2 7/8

RCP-03 000639 3 1/2

RCP-35 000640 4

RCP-04 000641 4 1/2

RCP-05 000649 5 1/2

RCP-06 000650 6 5/8

RCP-08 000651 8 5/8

RCP-10 000652 10 3/4

RCP-12 000653 12 3/4

RCP-14 000647 14

RCP-16 000648 16

RCP-18 000658 18

RCP-20 000659 20


Accessories 90° Short Radius Tube Elbow


3 EL-03 000660 3.0 3.5 6.0

3.5 EL-35 000661 3.5 4.0 8.0

4 EL-04 000662 4.0 4.5 8.0

5 EL-05 000663 5.0 5.50 10.0

6 EL-06 000664 6.0 6.5 10.0

8 EL-08 000665 8.0

10 EL-10 000666 10.0

12 EL-12 000667 12.0

14 EL-14 000668 14.0

16 EL-16 000669 16.0 Length = Diameter

18 EL-18 000598 18.0

20 EL-20 000599 20.0

22 EL-22 000600 22.0

24 EL-24 000601 24.0

Size Model No. Part No. Diameter Radius Length

90° Short Radius Tube Elbow

Page 31

RADIUS

LENGTH

DIAMETER

Sizes 3” to 6” Sizes 8” to 24”

DIAMETER

LENGTH


Accessories 90° Short Radius Tube Elbow With Flange One End


3 ELF-03 000670 3.0 3.5 6.0

3.5 ELF-35 000671 3.5 4.0 8.0

4 ELF-04 000672 4.0 4.5 8.0

5 ELF-05 000673 5.0 5.5 10.0

6 ELF-06 000674 6.0 6.5 10.0

8 ELF-08 000675 8.0

10 ELF-10 000676 10.0

12 ELF-12 000677 12.0

14 ELF-14 000678 14.0

16 ELF-16 000679 16.0 Length = Diameter

18 ELF-18 060521 18.0

20 ELF-20 060523 20.0

22 ELF-22 060525 22.0

24 ELF-24 060527 24.0

Size Model No. Part No. Diameter Radius Length

90° Short Radius Tube Elbow with Flange One End

Page 32

Sizes 3” to 6” Sizes 8” to 24”

Custom leg lengths available upon request.

RADIUS

DIAMETER

LENGTH

DIAMETER

LENGTH


Accessories Outlet Extension Straight Tube-ANSI Flange Both Ends


4 EXT-04-12 021803 4.0 12

4.5 EXT-45-12 021804 4.5 12

5 EXT-05-15 021805 5.0 15

6 EXT-06-18 021806 6.0 18

8 EXT-08-18 021807 8.0 18

10 EXT-10-20 021808 10.0 20

12 EXT-12-24 021809 12.0 24

14 EXT-14-28 021810 14.0 28

16 EXT-16-32 021811 16.0 32

18 EXT-18-36 021812 18.0 36

20 EXT-20-40 021813 20.0 40

22 EXT-22-48 021814 22.0 48

24 EXT-24-48 021815 24.0 48

Size Model No. Part No. A B

Outlet Extension-Straight Tube-ANSI Flange Both Ends

Page 33


Accessories Flanges - Model PFL 125/150# ANSI Drilled Steel Welding Plate Flanges

*Flangekitsavailable.Kitsinclude:(1)flange,(1)gasket,boltsandnuts.SeePriceList/Accessories/FlangeKits


2.0 PFL-02 2.44 6.00 4.75 0.50 0.75 4 3

2.5 PFL-25 2.94 7.00 5.50 0.50 0.75 4 4

3.0 PFL-03 3.57 7.50 6.00 0.50 0.75 4 5

3.5 PFL-35 4.07 8.50 7.00 0.50 0.75 8 6

4.0 PFL-04 4.57 9.00 7.50 0.50 0.75 8 6

5.0 PFL-05 5.66 10.00 8.50 0.50 0.88 8 7

6.0 PFL-06 6.72 11.00 9.50 0.50 0.88 8 8

8.0 PFL-08 8.72 13.50 11.75 0.50 0.88 8 11

10.0 PFL-10 10.88 16.00 14.25 0.50 1.00 12 15

12.0 PFL-12 12.88 19.00 17.00 0.50 1.00 12 22

14.0 PFL-14 14.19 21.00 18.75 0.50 1.13 12 27

16.0 PFL-16 16.19 23.50 21.25 0.50 1.13 16 31

18.0 PFL-18 18.19 25.00 22.75 0.50 1.25 16 32

20.0 PFL-20 20.19 27.50 25.00 0.50 1.25 20 38

22.0 PFL-22 22.19 29.50 27.25 0.50 1.38 20 39

24.0 PFL-24 24.19 32.00 29.50 0.50 1.38 20 40

26.0 PFL-26 26.19 34.25 31.75 0.50 1.38 24 43

28.0 PFL-28 28.19 36.50 34.00 0.50 1.38 28 49

30.0 PFL-30 30.19 38.80 36.00 0.50 1.38 28 55

Size Part I.D.-A O.D.-B C D Hole No. of Weight Number Bolt Center Diameter Holes

Page 34

HOLES : NUMBER AND SIZE

CA B


Accessories Flanges - Model TFL 125/150# ANSI Drilled Steel Welding Plate Flanges



2.00 TFL-02 2.06 6.00 4.75 .50 .75 4 4

2.50 TFL-25 2.56 7.00 5.50 .50 .75 4 5

3.00 TFL-03 3.06 7.50 6.00 .50 .75 4 5

3.50 TFL-35 3.56 8.50 7.00 .50 .75 8 6

4.00 TFL-04 4.06 9.00 7.50 .50 .75 8 7

5.00 TFL-05 5.06 10.00 8.50 .50 .88 8 8

6.00 TFL-06 6.06 11.00 9.50 .50 .88 8 9

8.00 TFL-08 8.06 13.50 11.75 .50 .88 8 13

10.00 TFL-10 10.06 16.00 14.25 .50 1.00 12 15

12.00 TFL-12 12.06 19.00 17.00 .50 1.00 12 23


Page 35


CA B


Accessories Flanges - Model REFL Steel Welding Single Reducing Plate Flanges



Size Par I.D.-A O.D.-B C D Hole No. of Weight Number Bolt Center Diameter Holes

Page 36

5 X 4 REFL-05X0400 4.06 10.00 8.50 .50 .88 8 9

5 X 4 REFL-05X0450 4.57 10.00 8.50 .50 .88 8 8

6 X 5 REFL-06X0500 5.06 11.00 9.50 .50 .88 8 11

6 X 5 REFL-06X0563 5.63 11.00 9.50 .50 .88 8 10

8 X 6 REFL-08X0600 6.06 13.50 11.75 .50 .88 8 16

8 X 6 REFL-08X0663 6.72 13.50 11.75 .50 .88 8 15

10 X 8 REFL-10X0800 8.06 16.00 14.25 .50 1.00 12 20

10 X 8 REFL-10X0863 8.75 16.00 14.25 .50 1.00 12 19

12 X 10 REFL-12X1000 10.06 19.00 17.00 .50 1.00 12 29

12 X 10 REFL-12X1075 10.88 19.00 17.00 .50 1.00 12 28

14 X 12 REFL-14X1200 12.06 21.00 18.75 .50 1.13 12 32

14 X 12 REFL-14X1275 12.88 21.00 18.75 .50 1.12 12 31

16 X14 REFL-16X1400 14.13 23.50 21.25 .50 1.12 16 37

18 X 16 REFL-18X1600 16.13 25.00 22.75 .50 1.25 16 38


CA B


Accessories Flanges - Model DREFL Steel Welding Double Reducing Plate Flanges



4 X 3 DREFL-04X0300 3.06 9.00 7.50 0.50 0.75 8 8

4 X 3 DREFL-04X0350 3.57 9.00 7.50 0.50 0.75 8 7

6 X 4 DREFL-06X0400 4.06 11.00 9.50 0.50 0.88 8 12

6 X 4 DREFL-06X0450 4.57 11.00 9.50 0.50 0.88 8 11

8 X 5 DREFL-08X0500 5.06 13.50 11.75 0.50 0.88 8 17

8 X 5 DREFL-08X0563 5.63 13.50 11.75 0.50 0.88 8 16

10 X 6 DREFL-10X0600 6.06 16.00 14.25 0.50 1.00 12 27

10 X 6 DREFL-10X0663 6.72 16.00 14.25 0.50 1.00 12 26

12 X 8 DREFL-12X0800 8.06 19.00 17.00 0.50 1.00 12 32

12 X 8 DREFL-12X0863 8.75 19.00 17.00 0.50 1.00 12 30

14 X 10 DREFL-14X1000 10.06 21.00 18.75 0.50 1.13 12 36

14 X 10 DREFL-14X1075 10.88 21.00 18.75 0.50 1.13 12 34

16 X 12 DREFL-16X1200 12.06 23.50 21.25 0.50 1.13 16 41

16 X 12 DREFL-16X1275 12.88 23.50 21.25 0.50 1.13 16 39


Page 37


CA B


Accessories Flanges - Model FLT Cast Iron Screwed Flanges



2.0 FLT-02 6.00 4.75 .62 1.00 .75 4 4

2.5 FLT-25 7.00 5.50 .69 1.12 .75 4 6

3.0 FLT-03 7.50 6.00 .75 1.19 .75 4 8

4.0 FLT-04 9.00 7.50 .94 1.31 .75 8 12

5.0 FLT-05 10.00 8.50 .94 1.44 .88 8 14

6.0 FLT-06 11.00 9.50 1.00 1.56 .88 8 16

8.0 FLT-08 13.50 11.75 1.12 1.75 .88 8 28

10.0 FLT-10 16.00 14.25 1.19 1.94 1.00 12 38

Size Part O.D.-B C D-1 D-2 Thickness Hole No. of Weight Number Bolt Center Thickness Through Hole Diameter Holes

D2D1

NOM .PIPESIZE B.C.D.

O.D.

HOLES :NUMBER AND SIZE

Page 38


Accessories Special Flanges - Caterpillar - Model CAFL



4.0 CAFL-04 1 4.06 5.50 4.13 0.50 0.56 4 3

5.0 CAFL-05 1 5.06 6.50 5.00 0.50 0.66 4 3

5.0 CAFL-05R 2 5.06 7.72 6.86 0.50 0.41 8 4

6.0 CAFL-06 1 6.06 7.75 6.00 0.50 0.78 4 5

8.0 CAFL-08 2 8.13 11.00 9.88 0.50 0.56 8 6

10.0 CAFL-10 2 10.13 13.50 12.44 0.50 0.50 12 9

12.0 CAFL-12 2 12.06 16.00 14.80 0.50 0.56 12 7

14.0 CAFL-14 2 14.06 18.00 17.00 0.50 0.56 12 15

16.0 CAFL-16 2 16.10 23.50 21.25 0.50 0.81 16 31

18.0 CAFL-18 2 18.13 22.50 20.88 0.50 0.63 16 19

Size Part Style I.D.-A O.D.-B C D Hole No. Weight Number Number Bolt Center Diameter Holes

Style 1 Style 2


A BC


A C B

|D|

Page 39


Accessories - Special Flanges Detroit Diesel - Model DFL, Mitsubishi - Model MIT



8.0 DFL-08 8.13 11.00 9.88 0.50 0.50 8 6

10.0 DFL-10 10.06 13.00 11.88 0.50 0.56 8 8

6.0 150138 0.06 9.50 8.19 0.50 0.43 6 6

10.0 150147 10.88 14.4 13.19 0.50 0.71 12 10



CA B

|D|

Page 40

8.0 MIT-08 8.00 12.50 11.02 .50 .88 8 10

10.0 MIT-10 10.00 15.16 13.58 .50 .88 12 14

12 MIT-12 12.00 16.93 15.35 .50 .88 12 15


Detroit Diesel

Mitsubishi


Accessories Special Flanges - Cummins - Model CUFL



5.0 CUFL-05 5.13 8.00 7.19 0.50 0.56 8 3

6.0 CUFL-06 6.13 8.00 7.19 0.50 0.56 8 3



CA B

|D|

Page 41


Accessories Model RMB - Round Mounting Bands Model OMB – Oval Mounting Bands

Standard Features

•Heavydutyconstruction•Vibrationtested•Protectivefinishapplied•Stainlesssteelavailable


10x15 OMB-1015 060200 6.75 .50 7.50

12x18 OMB-1218 060201 6.75 .50 8.50

14x21 OMB-1421 060202 6.75 .50 9.50

16x24 OMB-1624 060203 6.75 .50 10.75

BodyDia. Model No. Part No. C D E

4.5 RMB-45 020352 4.38 0.75 2.06 3.25 .31

6 RMB-06 020353 6.38 0.75 3.56 3.25 .31

7 RMB-07 020354 7.00 0.75 4.13 4.50 .31

8.5 RMB-85 020356 8.25 1.25 5.00 4.50 .44

10.5 RMB-105 020357 10.19 1.26 6.00 5.00 .44

12 RMB-12 020358 12.19 1.27 6.88 5.00 .44

14 RMB-14 020359 14.19 1.28 8.00 7.00 .44

16 RMB-16 020360 16.19 1.50 9.13 8.00 .50

18 RMB-18 020361 18.25 2.00 11.13 9.00 .50

20 RMB-20 020362 20.25 2.01 12.06 10.00 .50

22 RMB-22 020363 22.25 2.02 13.63 11.00 .63

24 RMB-24 020364 24.25 2.03 14.56 12.00 .63

26 RMB-26 020365 26.25 2.50 15.44 13.00 .63

28 RMB-28 02036 28.25 2.50 16.31 14.00 .63

30 RMB-30 020367 30.31 2.50 17.25 15.00 .63

36 RMB-36 020368 36.31 2.50 20.13 18.00 .63

Size Model No. Part No. B W E F M

Oval Mounting Bands Round Mounting Bands

W

M

B

E

F

BODY DIA.

DC

E

Page 42


Accessories Flange Accessories Ring Gaskets, Gasket Kits



2 G-02 000700

2.5 G-25 000701

3 G-03 000702

3.5 G-35 000703

4 G-04 000704

5 G-05 000705

6 G-06 000706

8 G-08 000707

10 G-10 000708

12 G-12 000709

14 G-14 000710

16 G-16 000711

18 G-18 001395

20 G-20 001396

22 G-22 001397

24 G-24 001398

Size Model No. Part No.

Ring Gasket

2 BNG-02 000712

2.5 BNG-25 000713

3 BNG-03 000714

3.5 BNG-35 000715

4 BNG-04 000716

5 BNG-05 000717

6 BNG-06 000718

8 BNG-08 000719

10 BNG-10 000720

12 BNG-12 000721

14 BNG-14 000722

16 BNG-16 000723

18 BNG-18 001400

20 BNG-20 001401

22 BNG-22 001402

24 BNG-24 001403


Bolts/Nuts/Gasket Weld On Flange

2 TBNG-02 000724

2.5 TBNG-25 000725

3 TBNG-03 000726

3.5 TBNG-35 000727

4 TBNG-04 000728

5 TBNG-05 000729

6 TBNG-06 000730

8 TBNG-08 000731


Bolts/Nuts/Gasket Threaded Flange

Page 43


Accessories Special Flange Accessories Ring Gaskets, Gasket Kits/Caterpillar, Cummins, Detroit Diesel



4 CATG-04 001575

5 CATG-05 001556

6 CATG-06 001394

8 CATG-08 00763

10 CATG-10 000732

12 CATG-12 000733

14 CATG-14 000734

16 CATG-16 000735

18 CATG-18 000736


Gasket For Caterpillar Flange

4 BNGCT-04 000768

5 BNGCT-05 000769

6 BNGCT-06 000770

8 BNGCT-08 000754

10 BNGCT-10 000771

12 BNGCT-12 000772

14 BNGCT-14 000773

16 BNGCT-16 000774

18 BNGCT-18 000775


Bolts/Nuts/Gasket For Caterpillar Flange

5 CUMG-05 000761

6 CUMG-06 000761


Gasket For Cummins Flange

5 BNGCM-05 000776

6 BNGCM-06 000776


Bolts/Nuts/Gasket For Cummins Flange

8 DDG-08 000763

10 DDG-10 001399


Gasket For Detroit Diesel Flange

8 BNGDD-08 000754

10 BNGDD-10 000755


Bolts/Nuts/Gasket For Detroit Diesel Flange

Page 44


Flex ConnectorsMale NPT/Male NPT & Male NPT/Slotted Cuff

1.5 M15-18M 060260 1.5 1.5 18

2.0 M02-18M 060261 2.0 2.0 18

2.5 M25-18M 060262 2.5 2.5 18

3.0 M03-18M 060263 3.0 3.0 18

3.5 M35-18M 060264 3.5 3.5 18

4.0 M04-18M 060265 4.0 4.0 18

5.0 M05-18M 060266 5.0 5.0 18

6.0 M06-18M 060267 6.0 6.0 18

Size Model No. Part No. A B C

•Standard321stainlesssteelflexhose•Carbonsteelendconnectors•Otherconnectionsavailable•Largersizesavailableuponrequest


BA

C

Page 45

2.0 M02-18SC 060310 2.0 2.0 18

2.5 M25-18SC 060311 2.5 2.5 18

3.0 M03-18SC 060312 3.0 3.0 18

3.5 M35-18SC 060313 3.5 3.5 18

4.0 M04-18SC 060314 4.0 4.0 18

5.0 M05-18SC 060315 5.0 5.0 18


BA

C

Male NPT/Male NPT

Male NPT/Slotted Cuff


Flex Connectors20° Lip Flange/Male NPT & Slotted Cuff/Slotted Cuff

Page 46

20 °

A B

C

4 FFL04-18M 060325 4.0 4.0 18

5 FFL05-18M 060326 5.0 5.0 18

6 FFL06-18M 060327 6.0 6.0 18


BA

C

2.0 SC02-18SC 060280 2.0 2.0 18

2.5 SC25-18SC 060281 2.5 2.5 18

3.0 SC03-18SC 060282 3.0 3.0 18

3.5 SC35-18SC 060283 3.5 3.5 18

4.0 SC04-18SC 060284 4.0 4.0 18

5.0 SC05-18SC 060285 5.0 5.0 18

6.0 SC06-18SC 060286 6.0 6.0 18




20° Lip Flange/Male NPT

Slotted Cuff/Slotted Cuff


Flex ConnectorsFlange/Flange & Flange/Male NPT

Page 47

4.0 FL04-18FL 060270 4.0 4.0 18

5.0 FL05-18FL 060271 5.0 5.0 18

6.0 FL06-18FL 060272 6.0 6.0 18

8.0 FL08-18FL 060273 8.0 8.0 18

10.0 FL10-18FL 060274 10.0 10.0 18

12.0 FL12-18FL 060275 12.0 12.0 18

14.0 FL14-18FL 060276 14.0 14.0 18


BA

C

2.0 SC02-18SC 060280 2.0 2.0 18

2.5 SC25-18SC 060281 2.5 2.5 18

3.0 SC03-18SC 060282 3.0 3.0 18

3.5 SC35-18SC 060283 3.5 3.5 18

4.0 SC04-18SC 060284 4.0 4.0 18

5.0 SC05-18SC 060285 5.0 5.0 18

6.0 SC06-18SC 060286 6.0 6.0 18


A B

C



Flange/Male NPT

Flange/Flange


Flex ConnectorsFlange/Slotted Cuff & Flange/Female NPT

Page 48



Flange/Slotted Cuff

2.0 FL02-18SC 060300 2.0 2.0 18

2.5 FL25-18SC 060301 2.5 2.5 18

3.0 FL03-18SC 060302 3.0 3.0 18

3.5 FL35-18SC 060303 3.5 3.5 18

4.0 FL04-18SC 060304 4.0 4.0 18

5.0 FL05-18SC 060305 5.0 5.0 18

6.0 FL06-18SC 060306 6.0 6.0 18

8.0 FL08-18SC 060307 8.0 8.0 18


A B

C

1.5 FL15-18FC 060330 N/A N/A 1 8

2 FL02-18FC 060331 2.0 2.0 18

2.5 FL25-18FC 060332 2.5 2.5 18

3 FL03-18FC 060333 3.0 3.0 18

3.5 FL35-18FC 060334 3.5 3.5 18

4 FL04-18FC 060335 4.0 4.0 18

5 FL05-18FC 060336 5.0 5.0 18

6 FL06-18FC 060337 6.0 6.0 18


BA

CFlange/Female NPT


Flex ConnectorsFlange/20° Lip Flange & Flange/Flanged 90° Elbow

Page 49

4 FL04-18FFL 060320 4.0 4.0 18

5 FL05-18FFL 060321 5.0 5.0 18

6 FL06-18-FFL 060322 6.0 6.0 18


20 °

BA

C



Flange/20° Lip Flange

Flange/Flanged 90° Elbow

3 FL03-18ELF 060340 3.0 3.0 18 6

3.5 FL35-18ELF 060341 3.5 3.5 18 8

4 FL04-18ELF 060342 4.0 4.0 18 8

5 FL05-18ELF 060343 5.0 5.0 18 10

6 FL06-18ELF 060344 6.0 6.0 18 10

8 FL08-18ELF 060345 8.0 8.0 18 8

Size Model No. Part No. A B C D

D

A

B

C


Flex ConnectorsMale NPT/Flanged 90° Elbow & Female NPT/Flanged 90° Elbow

Page 50

Male NPT/Flanged 90° Elbow

Female NPT/Flanged 90° Elbow



3 M03-18ELF 060350 3.0 3.0 18 6

3.5 M35-18ELF 060351 3.5 3.5 18 8

4 M04-18ELF 060352 4.0 4.0 18 8

5 M05-18ELF 060353 5.0 5.0 18 10

6 M06-18ELF 060354 6.0 6.0 18 10


D

A

B

C

3 FC03-18ELF 060360 3.0 3.0 18 6

3.5 FC35-18ELF 060361 3.5 3.5 18 8

4 FC04-18ELF 060362 4.0 4.0 18 8

5 FC05-18ELF 060363 5.0 5.0 18 10

6 FC06-18ELF 060364 6.0 6.0 18 10


B

AD

C


AccessoriesMounting Supports Type A & B Mounting Legs

•‘L’=standarddimension;minimum‘L’dimension=0inches;maximum‘L’dimension=12inchesatnoextra charge.


10 5 7/8 2 1/2 1/4 10 13 18

12 5 7/8 2 1/2 1/4 12 13 18

14 5 7/8 2 1/2 1/4 14 13 18

16 5 7/8 2 1/2 1/4 16 13 18

18 5 7/8 2 1/2 1/4 18 13 18

20 5 1 4 3/8 20 36 48

22 5 1 4 3/8 22 36 48

24 5 1 4 3/8 24 36 48

26 5 1 4 3/8 26 36 48

28 5 1 4 3/8 28 36 48

30 5 1 4 3/8 30 36 48

36 5 1 1/4 6 1/2 36 66 89

42 5 1 1/4 6 1/2 42 66 89

48 5 1 1/4 6 1/2 48 66 89

54 6 1 3/8 8 3/4 54 200 266

60 6 1 3/8 8 3/4 60 200 266

66 6 1 3/8 8 3/4 66 200 266

72 6 1 3/8 8 3/4 72 200 266

78 6 1 3/8 10 1 78 535 710

84 6 1 3/8 10 1 84 535 710

90 6 1 3/8 10 1 90 535 710

APPROX. WEIGHTB L M W T K 3 LEGS 4 LEGS

Type A - Mounting Legs

Type B - Mounting Legs

Page 51


AccessoriesMounting Supports Type D - Shell Lug Supports - Vertical

Standard‘L’=1/3of‘D’orpercustomerspecifications.


10 5/8 13 1/4 2

12 5/8 15 1/4 2

14 5/8 17 1/4 2

16 5/8 19 3/8 2

18 5/8 21 3/8 2

20 5/8 23 3/8 2 1/2

22 5/8 25 3/8 2 1/2

24 5/8 27 3/8 2 1/2

26 5/8 30 5/8 2 1/2

28 5/8 32 5/8 2 1/2

30 7/8 34 5/8 3 1/2

32 7/8 36 5/8 3 1/2

34 7/8 38 5/8 3 1/2

36 7/8 40 5/8 3 1/2

42 7/8 46 5/8 3 1/2

48 7/8 52 7/8 3 1/2

54 1 1/8 59 3/4 4

60 1 1/8 65 3/4 4

66 1 1/8 71 3/4 4

72 1 1/8 77 3/4 4

84 1 1/8 89 3/4 6

96 1 1/8 101 3/4 6

B – BodyDiameter M K W

Page 52


AccessoriesMounting Supports Type E - Shell Lug Supports - Horizontal



10 1/2 13 1/4 2

12 1/2 15 1/4 2

14 1/2 17 1/4 2

16 1/2 19 3/8 2

18 1/2 21 3/8 2

20 5/8 23 3/8 2 1/2

22 5/8 25 3/8 2 1/2

24 5/8 27 3/8 2 1/2

26 5/8 30 5/8 2 1/2

28 5/8 32 5/8 2 1/2

30 7/8 34 5/8 3 1/2

32 7/8 36 5/8 3 1/2

34 7/8 38 5/8 3 1/2

36 7/8 40 5/8 3/12

42 7/8 46 5/8 3 1/2

48 7/8 52 7/8 3 1/2

54 1 1/8 59 3/4 4

60 1 1/8 65 3/4 4

66 1 1/8 71 3/4 4

72 1 1/8 77 3/4 4

84 1 1/8 89 3/4 6

96 1 1/8 101 3/4 6

B – BodyDiameter M K W

Page 53


AccessoriesMounting Supports Type F - Saddle Supports - Horizontal



10 1/2 5 2 1/2 7

12 1/2 6 2 1/2 8

14 1/2 7 2 1/2 9

16 1/2 8 2 1/2 10

18 1/2 9 2 1/2 10.5

20 1/2 10 2 1/2 11.5

22 5/8 11 2 1/2 12.5

24 5/8 12 2 1/2 14.5

26 5/8 13 2 1/2 15.5

28 5/8 14 2 1/2 17

30 5/8 15 2 1/2 18

32 5/8 16 3 1/2 19

34 7/8 17 3 1/2 19.5

36 7/8 18 3 1/2 20.5

42 1 1/8 21 3 1/2 24

48 1 1/8 24 3 1/2 28

54 1 1/8 27 3 1/2 30.5

60 1 1/8 30 3 1/2 33

66 1 1/8 33 3 1/2 36

72 1 1/8 36 3 1/2 39

84 1 1/8 42 6 44

96 1 1/8 48 6 49.5

B – BodyDiameter M K W Q

Page 54


Accessories Sure-Seal Clamps


1.75 SSC-175Z 001540 1.75 1.750” - ( 1.975 / 2.125 )

2.00 SSC-200Z 001585 2.00 2.000” - ( 2.100 / 2.280 )

2.50 SSC-250Z 001541 2.50 2.500” - ( 2.675 / 2.875 )

3.00 SSC-300Z 001542 3.00 3.000” - ( 3.175 / 3.375 )

3.50 SSC-350Z 001543 3.50 3.500” - ( 3.675 / 3.875 )

4.00 SSC-400Z 001544 4.00 4.000” - ( 4.175 / 4.375 )

4.50 SSC-450Z 001545 4.50 4.500” - ( 4.675 / 4.875 )

5.00 SSC-500Z 001546 5.00 5.000” - ( 5.175 / 5.375 )

5.50 SSC-550Z 001547 5.50 5.500” - ( 5.675 / 5.875 )

6.00 SSC-600Z 001548 6.00 6.000” - ( 6.175 / 6.375 )

6.62 SSC-662Z 001558 6.62 6.625” - ( 6.800 / 7.000 )

8.00 SSC-800Z 001549 8.00 8.000” - ( 8.175 / 8.375 )

8.62 SSC-862Z 001559 8.62 8.000” - ( 8.175 / 8.375 )

Size Model No. Part No. A Nominal Size and Range

Page 55


Accessories Explosion Relief Cover

Standard Features

•Designedfor5-10psioperatingpressure

•Springloadedsafetyreliefcover

•Mustbelocatedinsilencersfirstchamberoppositetheinlet


4 - 6 6 5/8 11 3

8 - 12 12 3/4 19 3

14 - 22 16 23 1/2 4

24 -42 20 27 1/2 4

Silencer Size Size Size Connection Size A B D

Explosion Relief Cover

B

D

A

Page 56


Accessories Inspection Ports

Standard Features

•Handholesincludetheellipticalring,cover,gasket,yoke,boltand nut

•Standardcarbonsteelconstruction

•StandardwithBlueMax™highheatgaskets

Optional Features

•Stainlesssteelconstruction

•Specialgasketmaterial


12 - 18 3 x 4 4 1/2

20 - 30 4 x 6 6

32 - 54 6 x 8 11

60 and larger 11 x 15 * 56

Silencer Diameter Size A x B Weight

A

B

Inspection Ports Inspection Openings

Page 57


Accessories Wall Thimbles

Page 58


3 4.5 16 20

4 6 18 22

5 7 18 22

6 8 20 24

8 10 22 26

10 12 24 28

12 14 26 30

14 16 26 30

16 18 28 32

IPS Dimension Pipe Size A B C

Meets or exceeds NFPA37 & NFPA110

Size Model No./ Weight Part No.

Carbon Steel Construction

Stainless Steel Construction

Size Model No./ Weight Part No.

3 WTC-03-060370 35

4 WTC-04-060371 40

5 WTC-05-060372 62.5

6 WTC-06-060373 82

8 WTC-08-060374 121

10 WTC-10-060375 124

12 WTC-12-060376 143

14 WTC-14-060377 157

16 WTC-16-060378 175

18 WTC-18-060379 200

20 WTC-20-060380 225

3 WTS-03-060380 35

4 WTS-04-060381 40

5 WTS-05-060382 62.5

6 WTS-06-060383 83

8 WTS-08-060384 122

10 WTS-10-060385 125

12 WTS-12-060386 144

14 WTS-14-060387 158

16 WTS-16-060388 176

18 WTS-18-060389 200

20 WTS-20-060390 225

Page 59


WYE Connectors - Cummins

WYE Part Number

Gen Set Model Size Spread Overall

Height Inlet Type Outlet Type

WYE-020102 450 DFGA 5 x 5 x 8 12.69” 32.4” / 30.5” CUFL-05 8” ANSIWYE-020102 500 DFGA 5 x 5 x 8 12.69” 32.4” / 30.5” CUFL-05 8” ANSIWYE-020102 600 DFGB 5 x 5 x 8 12.69” 32.4” / 30.5” CUFL-05 8” ANSIWYE-023577 600 DFGB 5 x 5 x10 12.69” 32.4” / 30.5” CUFL-05 8” ANSI

VTA 28 G5

WYE Part Number



WYE-023578 620 DFHA 6 x 6 x 8 12.81” 30” CUFL-06 8” ANSIWYE-020631 620 DFHA 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSIWYE-020631 750 DFHA 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSIWYE-020631 700 DFHB 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSIWYE-020631 800 DFHB 6 x 6 x 10 12.81” 30” CUFL-06 10” ANSI

QST 30 G1 & G2

WYE Part Number



WYE-023579 800 DFJC 6 x 6 x 10 14.48” 33” / 31.94” CUFL-06 8” ANSIWYE-023075 900 DFJC 6 x 6 x 12 14.48” 33” / 31.94” CUFL-06 10” ANSIWYE-023579 880 DFJD 6 x 6 x 10 14.48” 33” / 31.94” CUFL-06 10” ANSIWYE-023075 980 DFJD 6 x 6 x 12 14.48” 33” / 31.94” CUFL-06 10” ANSIWYE-023075 1000 DFJD 6 x 6 x 12 14.48” 33” / 31.94” CUFL-06 10” ANSI

KTA 38 G3, G4, & G5

WYE Part Number



WYE-022544 900 DFHC 8 x 8 x 12 13.94” 30” CUFL-06 12” ANSIWYE-022544 1000 DFHD 8 x 8 x 12 13.94” 30” CUFL-06 12” ANSI

QST 30 G3, G4, & G5

WYE Part Number



WYE-023580 1100 DFLB 8 x 8 x 12 76.93” 35" CUFL-06 12” ANSIWYE-021051 1100 DFLB 8 x 8 x 14 76.93” 35” CUFL-06 14” ANSI

KTA 50 G2

32.40 30.50

18.00

12.68

30.00

16.88

12.81

30.00

16.00

13.94

35.00

76.93

18.00

31.94 33.00

18.00

14.48

Page 60


WYE Connectors - Cummins

WYE Part Number



WYE-022654 1120 DFLC 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSIWYE-022654 1250 DFLC 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSIWYE-022654 1200 DFLD 6 x 6 x 12 17.28” 38” / 37.04” CUFL-06 12” ANSIWYE-023581 1200 DFLD 6 x 6 x 14 17.28” 38” / 37.04” CUFL-06 14" ANSI

KTA 50 G3 & G4

WYE Part Number



WYE-020016 1280 DFMB 8 x 8 x 12 70.52" 50.54" 8" ANSI 12" ANSIWYE-020016 1500 DFMB 8 x 8 x 12 70.52" 50.54" 8" ANSI 12" ANSIWYE-023582 1500 DFMB 8 x 8 x 14 70.52" 50.54" 8" ANSI 14" ANSI

KTTA 50 G2

WYE Part Number



WYE-023583 1600 Kw 10 x 10 x 14 56.25" 36" 10" ANSI 14" ANSIWYE-022875 1600 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSIWYE-022609 1600 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSIWYE-023583 1800 Kw 10 x 10 x 14 56.25" 36" 10" ANSI 14" ANSIWYE-022875 1800 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSIWYE-022609 1800 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSIWYE-023584 1800 Kw 10 x 10 x 20 56.25" 36" 10" ANSI 20" ANSIWYE-022875 2000 Kw 10 x 10 x 16 56.25" 36" 10" ANSI 16" ANSIWYE-022609 2000 Kw 10 x 10 x 18 56.25" 36" 10" ANSI 18" ANSIWYE-023584 2000 Kw 10 x 10 x 20 56.25" 36" 10" ANSI 20" ANSI

QSK 60

38.00 37.04

18.00

17.28

18.00

70.52

50.54

36.00

18.00

56.27

Page 61


WYE Connectors - Caterpillar

WYE Part Number KW Rating Size Spread Overall


WYE-021449 910 Kw 6 x 6 x 10 20.54" 31.25" CAFL-06 10" ANSIWYE-021449 1000 Kw 6 x 6 x 10 20.54" 31.25" CAFL-06 10" ANSIWYE-023585 910 Kw 6 x 6 x 12 20.54" 31.25" CAFL-06 12" ANSIWYE-023585 1000 Kw 6 x 6 x 12 20.54" 31.25" CAFL-06 12" ANSI

3508 B



WYE-021508 1275 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSIWYE-021508 1360 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSIWYE-023586 1360 Kw 8 x 8 x 16 20.65" 39" CAFL-08 16" ANSIWYE-021508 1400 Kw 8 x 8 x 14 20.65" 39" CAFL-08 14" ANSIWYE-023586 1400 Kw 8 x 8 x 16 20.65" 39" CAFL-08 16" ANSIWYE-023587 1500 Kw 10 x 10 x 14 20.65" 39" CAFL-08 14" ANSIWYE-023588 1500 Kw 10 x 10 x 16 20.65" 39" CAFL-08 16" ANSI

3512 B



WYE-022351 1640 Kw 8 x 8 x 12 20.5" 39" CAFL-08 12" ANSIWYE-023555 1640 Kw 8 x 8 x 16 20.5" 39" CAFL-08 16" ANSIWYE-020216 1640 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSIWYE-020164 1640 Kw 8 x 8 x 18 20.5" 39" CAFL-08 18" ANSIWYE-022485 1640 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSIWYE-020216 1825 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSIWYE-022485 1825 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSIWYE-020216 2000 Kw 10 x 10 x 16 20.5" 39" CAFL-08 16" ANSIWYE-022485 2000 Kw 10 x 10 x 18 20.5" 39" CAFL-08 18" ANSIWYE-021462 2000 Kw 12 x 12 x 18 20.5" 39" CAFL-08 18" ANSI

3516 B



WYE-023589 1640 Kw 8 x 8 x 14 20.5" 39" CAFL-08 12" ANSIWYE-023555 1640 Kw 8 x 8 x 16 20.5" 39" CAFL-08 16" ANSIWYE-023590 1640 Kw 10 x 10 x 14 20.5" 39" CAFL-08 16" ANSIWYE-020216 1640 Kw 10 x 10 x 16 20.5" 39" CAFL-08 18" ANSIWYE-020216 1640 Kw 10 x 10 x 16 20.5" 39" CAFL-08 18" ANSIWYE-022485 1825 Kw 10 x 10 x 18 20.5" 39" CAFL-08 16" ANSI

3516 B QUAD TURBO

31.25 18.00

20.54

39.00

18.00

20.65

39.00

18.00

20.50

39.00

18.00

20.50

Page 62


WYE Connectors - Detroit Diesel



WYE-023593 400 Kw 5 x 5 x 10 46.06" 32" 5" Flare 10" ANSIWYE-023596 400 Kw 5 x 5 x 12 46.06" 32" 5" Flare 12" ANSIWYE-023595 400 Kw 6 x 6 x 8 46.06" 32" 6" Flare 8" ANSIWYE-023594 400 Kw 6 x 6 x 10 46.06" 32" 6" Flare 10" ANSI

8V-92TTA



WYE-023598 400 Kw 5 x 5 x 10 38.92" 35" 5" Turbo 10" ANSIWYE-023597 400 Kw 5 x 5 x 12 38.92" 35" 5" Turbo 12" ANSIWYE-020127 400 Kw 6 x 6 x 8 38.92" 35" 6" Turbo 8" ANSIWYE-023599 400 Kw 6 x 6 x 10 38.92" 35" 6" Turbo 10" ANSI

8V-92TTA

WYE Part Number KW Rating Size Spread Overall Height Inlet Type Outlet

TypeWYE-023600 450 Kw 5 x 5 x 12 45.69" 36.44" / 35.75" 5" Turbo 12" ANSIWYE-023378 450 Kw 6 x 6 x 10 45.69" 36.44" / 35.75" 6" Turbo 10" ANSIWYE-023601 450 Kw 6 x 6 x 12 45.69" 36.44" / 35.75" 6" Turbo 12" ANSI

12V-71TA


TypeWYE-023602 500 Kw 5 x 5 x 12 32.3" 19.44" / 19" 5" Turbo 12" ANSIWYE-023604 500 Kw 6 x 6 x 10 32.3" 19.44" / 19" 6" Turbo 10" ANSIWYE-023603 500 Kw 6 x 6 x 12 32.3" 19.44" / 19" 6" Turbo 12" ANSIWYE-023602 600 Kw 5 x 5 x 12 32.3" 19.44" / 19" 5" Turbo 12" ANSIWYE-023605 600 Kw 5 x 5 x 14 32.3" 19.44" / 19" 5" Turbo 14" ANSIWYE-023603 600 Kw 6 x 6 x 12 32.3" 19.44" / 19" 6" Turbo 12" ANSIWYE-023606 600 Kw 6 x 6 x 14 32.3" 19.44" / 19" 6" Turbo 14" ANSI

12V-92TA


TypeWYE-023607 500 Kw 5 x 5 x 12 32.52" 27.88" / 27" 5" Turbo 12" ANSIWYE-023609 500 Kw 6 x 6 x 10 32.52" 27.88" / 27" 6" Turbo 10" ANSIWYE-023608 500 Kw 6 x 6 x 12 32.52" 27.88" / 27" 6" Turbo 12" ANSIWYE-023607 600 Kw 5 x 5 x 12 32.52" 27.88" / 27" 5" Turbo 12" ANSIWYE-023610 600 Kw 5 x 5 x 14 32.52" 27.88" / 27" 5" Turbo 14" ANSIWYE-023608 600 Kw 6 x 6 x 12 32.52" 27.88" / 27" 6" Turbo 12" ANSIWYE-023611 600 Kw 6 x 6 x 14 32.52" 27.88" / 27" 6" Turbo 14" ANSI

12V-92TA(low turbo mount)

30.26 18.00

46.50

35.00

18.00

38.92

36.44

18.00

44.69

35.75

6.647.84

19.4412.00

19.00

32.30

27.88 27.00

32.52

17.0018.00

Page 63





WYE-023612 750 Kw 6 x 6 x 14 32.75" 27.88" / 27.5" 6" Turbo 14" ANSIWYE-023613 750 Kw 8 x 8 x 12 32.75" 27.88" / 27.5" 8" Turbo 12" ANSIWYE-020554 750 Kw 8 x 8 x 14 32.75" 27.88" / 27.5" 8" Turbo 14" ANSI

16V-92TA



WYE-023611 750 Kw 6 x 6 x 14 32.75" 27.88" / 27" 6" Turbo 14" ANSIWYE-023614 750 Kw 8 x 8 x 12 32.75" 27.88" / 27" 8" Turbo 12" ANSIWYE-023615 750 Kw 8 x 8 x 14 32.75" 27.88" / 27" 8" Turbo 14" ANSI

16V-92TA(low turbo mount)



WYE-020847 1200 Kw 8 x 8 x 14 46" 34.5" 8" ANSI 14" ANSIWYE-023616 1200 Kw 8 x 8 x 16 46" 34.5" 8" ANSI 16" ANSI

12V-149TIB(high turbo mount)



WYE-023617 1500 Kw 10 x 10 x 16 46" 34.5" 10" ANSI 16" ANSIWYE-023619 1500 Kw 10 x 10 x 18 46" 34.5" 10" ANSI 18" ANSIWYE-023617 1600 Kw 10 x 10 x 16 46" 34.5" 10" ANSI 16" ANSIWYE-023619 1600 Kw 10 x 10 x 18 46" 34.5" 10" ANSI 18" ANSI

16V-149TIB



WYE-023618 1200 Kw 10 x 10 x 14 46" 34.5" 10" ANSI 14" ANSIWYE-023617 1200 Kw 10 x 10 x 16 46" 34.5" 10" ANSI 16" ANSI

12V-149TIB(high turbo mount)



WYE-023620 10 x 10 x 14 51.55" 36" 10" ANSI 14" ANSI

WYE-021466 10 x 10 x 16 51.55" 36" 10" ANSI 16" ANSI

24V-71T

18.00

32.75

27.88 27.50

17.00

32.75

27.88 27.00

18.00

34.50

46.00

18.00

34.50

46.00

18.00

36.00

51.55

18.00

Page 64



WYE Part Number



WYE-023621 450 / 500 5 x 5 x 8 33" 29.65" / 31" 5" Flare 8" ANSIWYE-023622 450 / 500 5 x 5 x 10 33" 29.65" / 31" 5" Flare 10" ANSIWYE-023623 450 / 500 5 x 5 x 12 33" 29.65" / 31" 5" Flare 12" ANSI

8V-2000

WYE Part Number



WYE-023624 600 / 750 5 x 5 x 8 34.19" 30.84" / 31" 5" Flare 8" ANSIWYE-023625 600 / 750 5 x 5 x 10 34.19" 30.84" / 31" 5" Flare 10" ANSIWYE-023626 600 / 750 5 x 5 x 12 34.19" 30.84" / 31" 5" Flare 12" ANSI

12V-2000

WYE Part Number



WYE-023627 800 ROZD 6 x 6 x 8 34.94" 31" 6" Flare 8" ANSIWYE-023628 800 ROZD 6 x 6 x 10 34.94" 31" 6" Flare 10" ANSIWYE-023629 800 ROZD 6 x 6 x 12 34.94" 31" 6" Flare 12" ANSIWYE-023630 800 ROZD 6 x 6 x 14 34.94" 31" 6" Flare 14" ANSI

16V-2000

WYE Part Number Gen Set Model Size Spread Overall


WYE-023631 1250 - 1500 Kw 10 x 10 x 12 18.5" 34.75" 10" ANSI 12" ANSIWYE-021055 1250 - 1500 Kw 10 x 10 x 14 18.5" 34.75" 10" ANSI 14" ANSI

12V-4000

WYE Part Number



WYE-023632 2000 Kw 10 x 10 x 14 37" 26" 10" ANSI 14" ANSIWYE-021054 2000 Kw 10 x 10 x 16 37" 26" 10" ANSI 16" ANSIWYE-023633 2000 Kw 10 x 10 x 18 37" 26" 10" ANSI 18" ANSI

16V-4000

31.00

33.00

18.00

29.65

31.00

34.19

18.00

30.84

31.00

34.19

18.00

34.75

18.00

18.50

12.0226.00

37.00

Limited Warranty Guarantee

Phillips & Temro Industries products are guaranteed for one year from date of purchase by the consumer against defects due to materials and the Company’s workmanship only, as either and both of which the Company shall be the sole judge.

The sole obligation hereunder shall be to repair, or at the Company’s option to replace products as aforesaid, provided same are returned “Transportation Prepaid” to the Company’s nearest plant within the said period.

Other defects or failures due to improper or careless installation, storage or handling, or usage contrary to manufacturer’s directions, design or specifications, as to any and all of which the Company shall be the sole judge, are specifically excluded from this guarantee.

No liability is accepted for return transportation charge, following repaid or replacement as aforesaid or for reinstallation costs. No liability for loss or damage of any nature or kind, whether arising out of or from the use of the product, whether or not defective, is assumed. No other expressed or implied warranties exist in the absence of special agreement.


Limited Warranty Guarantee

Page 65


Notes

Page 66


Notes

Page 67

Customer Profile / Sizing a Silencer


Need additional information? Please provide us with the following information and will we have a sales representative or the factory contact you direct.

Name ______________________________________________________________________ Title _____________________________

Company ____________________________________________________________________

Address _____________________________________________________________________

City __________________________________ State _________ ZIP _____________________

Phone ________________________________ Fax ________________________________ E-mail _______________________________

Please complete and fax to 952-3440-3400 or contact your local Sales Representative

Information Required for Sizing an EM Products® SilencerSizing Disks Available

For Dry Exhaust System:

1. Engine Model / KW / HP _________________________________________________________________________________________

2. Maximum Exhaust Flowrate (ACFM) _________________________________________________________________________________

Maximum Exhaust Temperature (°F) _________________________________________________________________________________

3. Engine Exhaust Outlet Size & Description ______________________________________________________________________________

4. Maximum Allowable Pressure Drop In W.C. ____________________________________________________________________________

5. Silenced Noise Criteria & Applicable Distance from Silencer to Which Criteria Applies _____________________________________________

6. Grade of Silencer Required q Industrial q Residential q Critical q Hospital

7. Silencer Type Required q Reactive/Chamber q Low Pressure Drop q Spark Arrestor Type

8. Special Silencer Required q Disk Style q Low Profile q Other

9. Mounted Vertical / Horizontal ___________________________________________ Model Reference ________________________

10. Special Silencer Required: # of 90° Elbows ___________________________ Size/Diameter ___________________________

# of 45° Elbows ___________________________ Size/Diameter ___________________________

Length of Straight Pipe Run ___________________ Size/Diameter ___________________________

Page 68

Documents

Engine Silencing Solutions - Industrial Exhaustindustrialexhaust.com/catalogues/puck_silencers.pdf · silencers for a multitude of applications suitable for diesel, gas and gaseous