Upload
hadar
View
192
Download
1
Embed Size (px)
DESCRIPTION
Engine Room Platform 1. The Engine. Main Engine. The main engine contains pistons, connecting rods and crankshafts which supply power to __________ the propeller. The are usually 2,3 or 4 platforms around the engine which let the engineers __________ different parts of the engine. Platforms. - PowerPoint PPT Presentation
Citation preview
Engine Room Platform 1
The EngineVocabulary Vocabulary
Platforms BackupAccess Drive / rotateEmergency OperateFailure Pressurized airAir Compressors
Remove
Main EngineThe main engine contains pistons, connecting rods and crankshafts which supply power to __________ the propeller.
The are usually 2,3 or 4 platforms around the engine which let the engineers __________ different parts of the engine.
Platforms
Air Compressors / Air RecieversThere are usually two starting air compressors for backup in case one air compressor breaksdown. The air compressors pressurize air before __________ it to the air receivers.
There are two air receivers in the air start system. The air receivers contain __________. The air is pressurized by the __________ and supplied to the air receivers.
Emergency Control Station
This is designed to operate the main engine if there is an automatic control system __________. It is usually used in an __________.
The main engine is controlled from the bridge or Engine Control Room by telegraph and fuel lever control. These systems of control are called Remote Control Maneuvering Systems.
If the remote control maneuvering system fails to operate from both the remote stations, i.e. bridge and ECR. The Emergency Control Station can be used to provide a maneuvering control system.
Vacuum Priming UnitThis device is designed to ________ the air from the ballast pumps.
Check Your UnderstandingWhat does the ME do?What do the platforms do?What do the Air Compressors do?What does ECS do?What does the Vacuum Priming Unit do?
ExerciseObject Describing Sentence
Nut A small piece of metal with a hole for fastening a bolt
Bearing A tube that fits around another part
Valve A structure with many elements for doing some work
Bolt A sharply grooved metal rod that can be drilled into a hole to fasten something
Tube Sleeve
A part of a machine which something revolves around
Screw A device for removing dirt
Filter A grooved metal rod with a head used with a nut to hold things
Machine A device that permits the flow of fluid or gas
AnswersObject Describing Sentence
Nut A small metal piece with a hole for fastening a bolt
Bearing A machine part which something revolves aroundMachine A structure with many elements for doing some
workScrew A sharply grooved metal rod that can be driven
into a hole to fasten something
Tube Sleeve
A tube part fitting around another part
Filter A device for removing dirtBolt A grooved metal rod with a head used with a nut
to hold something
Valve A device that permits the flow of liquid or gas
ExerciseVocab Vocab
Practical RepairsSufficient KnowledgeMachine PeriodRusty CertificateSuccessful TrainingQualified CandidateCompetency
Bolts
Working engineer
Exercise
1. __________ ________ at sea is not easy even for the best students.
2. A cadet should have __________ __________ to prepare himself for sea training.3. Minor __________ __________ can be done on board by engineers.
4. Replace all the __________ __________ with clean ones.
5. __________ ____________ have a combination of practical skills and theoretical knowledge.
6. __________ __________ are required before working on a vessel
7. The __________ ___________ cannot be longer than half a year.
Answers1.
2.
3.
4.
5.
6.
7.
The End