Embed Size (px)
Citation preview
Enge Plas Automation Sdn. Bhd.
Solutions
Description
Here at Enge Plas, we have accumulated over 30 years of experiencein providing solutions for our customers in Singapore, Malaysia and theregion, across industries in Plastics, Food, Minerals & Chemicals.
Some examples of our solutions include:
Unloading & Silo StorageMaterial HandlingCentralised ConveyingCompounding & ExtrusionCentralised Control & Instrumentation Systemsand many more…
Find out More
Contact us to learn more about our Solutions @[email protected]
BM Silo
Description
BM Silo’s well-known “Modular silo” was first launched in the 1970s,and despite its many variants today, the same principle continues as thebasis of products to this very day. They have exported silos since 1972.The “Kit-form” packaging means that the silos are ideally suited for exportand some 80% of turnover is exported.
The knowledge gained through world-wide dealer network is used todevelop, enhance and expand the product range. The productionpremises, located in a previous farm building, appear up-to-date andappealing with the latest equipment in CNC machinery and LEANproduction. JUST-IN-TIME production allows BM Silo to provide extremeflexibility in terms of delivery times and product mixes.
BM Silo has some 35 employees of which many have been with us fora number of years but they also accept social responsibility as we usuallyemploy unemployed and unskilled employees. Their employees arealways willing to seek in-service training to gain new knowledge so theycan produce as efficiently as possible and maintain production at theaddress in Tvis.
This ensures the basis of a well-documented quality product atcompetitive prices throughout the world.
Modular Silo
BM Modular silo is a square or rectangular modular built silo designed
1 of 55
for storing dry materials. For decades, this silo has been renowned for itsvery high quality and manufacturing precision.
Agrosilo
BM Agrosilo is the “kid brother” of the Modular silo renowned for itssuperior quality for decades. The silo itself remains unchanged, but theoptimised leg structure and the bottom cone without partition wall offer twoobvious advantages - lower cost and shorter assembly time.
Mineral Silo
Mineral Silo is a square, modular silo designed for the storage of dryminerals. For decades, the silos have been known for their very highquality.
Outdoor Modular Silo
Outdoor Modular silo is a square, modular built silo for storage of drymaterials. All of the silo’s side panels have external flanges withdownfolded edges that seals the horizontal joints. The flanges and theheavy duty rubber filler strips ensure that the silo is completely sealed.The silo is dimensioned for a basic wind speed of Vb = 27 m/s in terraincategory II, and a snow load of Sk = 0,9 kN/m².
Round Steel Silo
Round steel silo is made of aluzinc plates which are high quality platesthat combine the best properties of aluminium and zinc. Tests show thatthis type of plate has a considerably longer service life than galvanisedplate. Delivered fully assembled from the factory or unassembled forexport.
Outdoor Wooden Pellet Silo
Outdoor wood pellet silo is a square, modular silo designed for thestorage of dry materials. All side plates of the silo have exterior flangeswith bent-down edges which close the horizontal joint. With the enclosedsealant, this ensures that the silo can be made perfectly tight.
Mobile Hopper
Mobile Hopper has been developed specifically to store granulate inthe plastics industry. With the wheels, moving the materials in productionas required is easy.
Find out More
Contact us to learn more about BM Silo @ [email protected] BM Silo @ bmsilo.com/uk
2 of 55
Fox Valve
Description
Fox is a global leader in the design and manufacture of engineeredventuri products for industrial, aerospace, and other applications. Theyare a privately owned small business founded in 1961.
Fox Valve manufactures venturi eductors, ejectors, and venturi flowcontrols for industry, including solids-conveying eductors, air ejectors,steam ejectors, liquid eductors, and multi-stage vacuum systems. Fox hassupplied these products to industry, aerospace, and research since 1961.
Solids Conveying Eductors
Venturi eductors for use in transporting powders, pellets, and bulksolids, typically using motive pressures under 14 psig. Fox providescomplete venturi transport systems, including blowers, valves, receivers,etc.
Fox Venturi Eductors - What are they?
Fox Venturi Eductors convert the output of a blower into suction thatcan be used to entrain and feed powders, pellets, and bulk solids into apneumatic conveying system. Because they have no moving parts, theycan operate almost entirely maintenance-free. The eductor acts tocompress the air/solids mixture to a pressure adequate to overcomelosses in the downstream convey line.
How are they used in pneumatic conveying systems?
Fox Venturi Eductors are used to feed bulk solids, such as powders,pellets, flakes, and particulates, into positive, dilute-phase conveyingsystems. They are commonly used in place of rotary valves whereairlocks simply cannot perform adequately.
Eliminating the rotary airlock, left, with a venturi eductor, right, permitsproduct feed with no moving parts for maintenance-free conveying
Why are eductors used in pneumatic conveying systems?
Fox Venturi Eductors have No Moving Parts - allowing for maintenance-free feeding of bulk solids. In applications involving fine, abrasive, orirregularly-shaped products, this is an enormous advantage. Replacementof existing rotary airlocks with venturi eductors makes for simpler, morereliable conveying systems. Designing with eductors from the beginningensures the most reliable product feeding available.No Blowback - All rotary airlocks have blowback. If the product conveyedis fine or abrasive, blowback can cause extreme wear problems. Even withfree-flowing products, blowback can be a problem, causing bridging andhousekeeping problems, or even an explosion hazard. When installedbeneath baghouses, screw conveyors, or dust collectors, airlocks can be amajor source of fugitive dust emissions, which are eliminated after aretrofit to Fox eductors.No mechanical shearing - Eductors minimize the shearing, smearing ordegradation of product common with rotary airlocks. And, of course,safety is simply not a concern with Fox eductors.
Find out More
Contact us to learn more about Fox Valve @ [email protected] Fox Valve @ foxvalve.com
3 of 55
Volkmann
Description
Volkmann GmbH is based in Soest in Westphalia and was founded in1973 by Jürgen and Ingrid Volkmann as a consulting company forproduction automation. The company started in the early years withapplications within vacuum technology. Own ideas and developmentssuch as the patented „Säuferbalken“® (combined vacuum strippingprocess for drying belt surfaces and for liquid recovery in mills) and thepatented Multijector® (special construction form of a multi-stage ejectorvacuum pump operated by compressed air) made the company a partnerdriven by ideas and application technologies for customers fromwidespread branches of industry.
Thilo Volkmann now heads the company since 1991 and is the secondgeneration. Today, Volkmann is a specialist in the transport and handlingof bulk materials. In particular, Volkmann offers customers from theChemical, Food Processing and Pharmaceutical Industry class leadingstandards as well as individually planned and produced systems for thesafe, hygienic and user-friendly handling of powders and bulk materials.Thanks to a professional and creative team, Volkmann consistentlyproduces new and better solutions for itself and its customers which canbe manufactured with the company’s modern machinery and leanmanufacturing principles Today, Volkmann employs nearly 100employees and operates subsidiaries in Great Britain, France and theUSA. Volkmann is internationally present in many countries with localagencies.
Vacuum Conveyors
Make all powder handling in production processes safe and reliable,make the work of your production staff easier and improve the conditionsat the workplace. Choose Vacuum Conveying systems from Volkmann.
user friendly systems with safe material transfereasy material aspiration and dust-free loading of machinesgentle dense phase conveying, no segregation of material mixturesoptimum hygiene conditionsreliable filter systems in GMP qualitysimple to install and to operatelow energy consumptionfavorable investment- and operating costs
The different modular families of Vacuum Conveyors for the Chemical-,Pharma- and Food-Industry allow customized modifications of allconveyors regarding the individual application. Even critical materials canbe conveyed safely and adapted conveyors can be used for hazardousapplications like inside explosion areas or with highly toxic materials.
The modular design allows quick delivery times for complete conveyors(1-2 weeks for Food-/Chemical-Conveyors, 3-4 weeks for PharmaConveyors, 4-8 weeks for highly customized systems).
Typical conveying capacities: 100 kg/h up to 3.5 t/h (max. 12 t/h)
Typical conveying distance: 15 m far and 10 m high (max realized 100m far + 40 m height)
Product Loading Stations
Discharge products such as powder, dust and granulated materialdirectly from barrels, drums, bags, special bins and containers, even withplastic liners. Combine these units with process control systems andintegrate remote controls or monitoring systems. All levels, alarms anderror messages as well as other required information can be transmittedby an interface for evaluation and monitoring.
4 of 55
Ask us for our solutions on how to pick up and convey the materialswithin your production process, e.g. for emptying bags and special bins,Big-Bags, Silos etc. Utilize Volkmann’s experience in powder handling.
Your benefits:
Dust-free material handlingProduct aspiration and loading with full controlAvoid the difficult manual handling of all sorts of bulk materials packed indrums/containersReduce health risks in the workplaceProtect the environment from hazardous materialsIncrease the quality of your final products and the working environment
Stationary & Mobile Hoists
The handling and positioning of a vacuum conveyor above a container,bin or production machine can be made easier by use of a stationary ormobile hoist. Volkmann hoists are lightweight and easy manoeuvrable.
Solutions and benefits:
One Vacuum Conveyor to feed into different systemsQuick, comfortable and hygienic operation and handlingpneumatic, electric or manual operationhygienic versions (pharma design)customized connections and docking solutions availabledesigned and manufactured from Volkmann in Germany
Find out More
Contact us to learn more about Volkmann @ [email protected] Volkmann @ volkmann.info/en
Big Bag Filling Unit
Description
Our filling systems are used in various industry and application sectors.Integrated in existing production processes, they ensure safe andprofitable filling of big bags.
Filling of big bagsAvailable with integrated weighing systemAvailable made of various construction materialsWide range of additional equipment and special executionsAs an option conformity to ATEX acc. to regulation 94/9 EC
Range of Application
Big-bag filling units are suitable for filling commercial sizes of big bagswhile at the same time carrying out calibrated weighing of powdery andgranular products. Products are metered into the big bag for example viametering screws, rotary valves or metering chutes. As an option, it is alsopossible to realize metering volumetrically via level indication withoutweighing system.
Key Features
As an option with adjustable height for adapting the unit to various sizes ofbig bags (manually or electrically)Easy operationModular constructionVarious connection systems for the big-bag inletOptional GMP
5 of 55
Find out More
Contact us to learn more about Big Bag Filling Units @[email protected]
Puslotronic
Description
Pulsotronic-Anlagentechnik GmbH has its registered offices in theChemnitz-Zwickau business area of Niederdorf/Stollberg. Because of thepermanent, positive development of the business, a new complex ofbuildings was erected in 2007 directly on the A72. The structural facts,latest production equipment and a motivated work force permit a top-flightdegree of innovation and flexibility.
Pulsotronic develops, produces and sells metal detectors, separatorsand custom equipment based on many years of experience in the plasticsand recycling industry. Further innovative products were successfullyintroduced in the food industry and in other branches of industry.
The products distinguish themselves through their high reliability,sensitivity and user-friendliness. A team of engineers permanently workson improvements and customer-specific solutions. The development andproduction of all the products and custom systems occurs completely atthe site in Niederdorf. Thus, it is possible for them to try out newprocesses and principles and to put them into practice as quickly aspossible. In addition, they utilize the synergies of the Group ofCompanies. Pulsotronic is able to access all the areas quickly, therebyensuring flexibility, regardless of whether this involves high efficienttoolmaker's shop, plastic transfer moulding, electronic fabrication or EMClaboratory.
Quality assurance and environmental protection are centralcomponents of Management. Pulsotronic-Anlagentechnik has been ISO9001-2008 certified. The initial certification of the EnvironmentalManagement System in accordance with ISO 14001:2005 took place in2007. Pulsotronic-Anlagentechnik supports all aspects of the “ZVEI-Codeof Conduct for social responsibility”.
Extensive technical knowledge and outstanding on-site service belongto the basic prerequisites for a successful machinery and systemsbusiness. They are pleased to tackle your tasks, while remaining loyal tothe motto: “Pulsotronic - complex solutions from one source”
Metal detectors for conveyor belts, chutes and roll goods
Series BDhigh level of detection since the magnetic field surrounds the productsstainless steel housing with long-time stable and water-tight encapsulationavailable in various detector sizes, adapted for the productfulfills all the requirements in effect currently for AUDITS according toHACCP / IIFShygienic designSeries TUdividable stainless steel housingstainless steel housing with long-time stable and water-tight encapsulationavailable in various detector sizes, adapted for the producteasy integration, since housing is dividableSeries SP / AReasily integrated in conveyor belts, since it can be installed flushlong-term stable, fully encapsulated in extremely stable metal housingbelt stop or reverse motion operation available using reversing contactorcircuitryexternal control electronics with RESET/START-STOP buttonstandard detection widths to 1,200 mm
6 of 55
no metal-free zones
Metal detectors for bulk materials
Series VAextremely sturdy and compact stainless steel housingdevice-specific material throughput of up to 14,000 l/hstainless steel ejection unitoptionally with wear-resistant product pipeoptionally high-temperature applicationSeries Yextremely effective, quick-reacting pneumatic outward transfer systemseparates metal from slow back-pressure material columnsdevice-specific material throughput of up to 5,400 l/hextremely flat mounting heightoptionally high-temperature application
Metal detectors for pipe systems
Series extraktor unique ejection system for integration in suction conveyor – the pipesystem remains closed during the ejection of metal impurity!easily integrated into the suction conveyor line with hose connectionadjustment-free separating, irrespective of material speeddevice-specific material throughput of up to 3,300 l/hoptionally in wear-resistant modeltwo large inspection doors
Control units
M-Pulse2four-quadrant technologymulti-frequency technologytouch screen / graphical displayhigh-precision product effect offsettingunlimited product memory spacesnetzworking / ethernet / USBcomprehensive support for peripheralsremote diagnosticsdisplay transmitted by RS485
Find out More
Contact us to learn more about Pulsotronic @ [email protected] Pulsotronic @ pulsotronic-anlagentechnik.de/en
Form Fill Seal Machine
Description
Enge Plas offers plastic compounders reliable and innovative solutionsto meet the challenging demands of automatic packing systems,especially when frequent product changeovers are required.
We have the know-how along the entire process chain to ensuremaximum customer benefits. Easy integration of packaging equipmentinto customer's process and workflow is therefore essential for us.
All packaging functions from weighing to palletizing in one single unitSmall footprintIntegrated bag flattenerSimple design for high availability and good accessibility for easymaintenanceModular design facilitates future capacity upgrade
7 of 55
Operation, changes of setup and maintenance are easy and intuitive bytouch screen
Find out More
Contact us to learn more about Form Fill Seal Machines @[email protected]
Big Bag Emptying Unit
Description
Emptying of big bags places many requirements on technology andpersonnel: dust-proof docking and emptying requires operationally safe &user-friendly solutions, and flexibility. Our Big bag emptying stations arebased on individual application requirements and can be used up to OEBclass 4.
Emptying of big bagsModular constructionAvailable with integrated weighing systemAvailable made of various construction materialsWide range of additional equipment and special executionsAs an option conformity to ATEX acc. to regulation 94/9 EC
Range of Application
Big-bag emptying units are applied for dust free discharging andmetering of bulk goods from big bags. Metering from the big bags iseffected for example by means of metering screws, rotary valves ormetering chutes. The big-bag emptying unit can also be mounted on silos,mixers etc. for free-fall discharging.
The distinguishing feature of this unit is modular construction allowingsubsequent modifications or changes.
Key Features
Subsequent changing of the construction height is possible (for usinglarger big bags later).Weighing module can be extended for negative weighing.Tightening device can be modified for big bags.Emptying unit can be modified for other big-bag outletsSubsequent changing of manual operation to pneumatic operation of theemptying unit is possible.Height adjustment of the discharging aid is possible at any time viastandard boreholes in the base frameEasy operationOptional GMP execution
Find out More
Contact us to learn more about Big Bag Emptying Units @[email protected]
PurgeX
Description
8 of 55
PurgeX® is a mechanical purging agent that enables the safe,effective and efficient cleaning of plastics processing equipment.
Metal surfaces are cleaned using a unique scrubbing effect. The materialis not abrasive to screw, barrel, die etc.Particularly useful when changing colour, polymer, or when screw andbarrel are carbonized. Enables rapid purging of the previous colour and/orpolymer, so that machine downtime and loss of expensive polymer isminimized.Suitable for injection moulding, extrusion and blow moulding processes.Cost effective, as only a small amount is required, usually at 20% addrate to the polymer.
How PurgeX® works
PurgeX® is a granular material that is blended in with a small amountof the polymer that you are using and fed into a starved screw/barrel.
The blended material is processed through your equipment at similartemperatures and revs to typical run conditions for the carrier polymer.
The PurgeX® material softens slightly, but does not melt, andthoroughly loosens carbonized and degraded resin, allowing the polymerto flush out the system.
This makes it particularly useful for:
Cleaning colour from your equipmentCleaning polymer from your equipmentRemoving carbon build-up and black specksRegular preventative maintenanceBefore manual cleaning
PurgeX® grades
PurgeX® T for injection moulding (except where openings are less than1.5mm)PurgeX® S for extrusion, blow moulding, and injection moulding withopenings less than 1.5mmPurgeX® R for hot runner systems with a minimum clearance of 0.75mm
PurgeX® A (acrylic) grade
PurgeX® A is cell cast acrylic in granular form. As distinct from the T, Sand R grades, PurgeX®A grade is typically used in unblended form (i.e. at100%) in extrusion and compounding processes.
PurgeX® A provides a gentle scrubbing effect to the screw and barreland removes build up of carbonised material.
PurgeX® A softens but does not melt, therefore it provides a scrubbingeffect – it does not scratch or wear the screw or barrel.
Suggested purging procedure:
Adjust temperature if necessary. Suggested temperature range forpurging is 240-260°C.Starve screw and barrel of current material.Add PurgeX® A in slow, continuous manner into hopper.Flush out PurgeX® A with next material to be processed.
Nozzles, dies and screen packs should be removed during purging toavoid blockages unless opening is large enough to allow acrylic particlesto pass through in softened form (approx 2.0-2.5mm).
Find out More
Contact us to learn more about PurgeX @ [email protected] PurgeX @ nicheplas.com.au/purgex-purging-compounds
9 of 55
Automatic Sack Opening & EmptyingSystem
Description
We provide the world-first and most efficient, fully automated sackemptying system in the world. Our key advantages include more than99.99% emptying of raw material, immediate reduction in labour costs andcontamination risks, and unparalleled safety that is backed by approvalfrom the world's major standards institutes. There are multiple modelsdesigned to fit the needs of your factory.
Suitable for hazardous productsNo dust emissionOperator safetyInbuilt empty sack compactionEase of accessMinimal maintenanceIncorporates the best in robotics, design and craftsmanship, and servesclients from multiple industries throughout the world.
Range of Throughputs
300 sacks per hour600 sacks per hour800 sacks per hour1,300 sacks per hour
Key Features
99.99% emptying of sack contentEliminates contamination riskBacked by industry's best warrantyMeets and surpasses all industry standardsReduces employee cost and risk of injury
Find out More
Contact us to learn more about Automatic Sack Opening & EmptyingSystems @ [email protected]
10 of 55
Silo
Description
From huge site-assembled outdoor aluminium or stainless steelconstructions with sizes up to 6,750 m3 to small modular indoorgalvanised or stainless steel constructions with sizes down to 1.3 m3,Enge Plas has the experience and track record of safeguarding yourmaterial.
Wide range – square or round, in aluminium or galvanised steel orstainless steel, for indoor and outdoor use. All sizes.Transport equipment and accessories also available.Delivered as standard with a steel cover, inspection hatch, inspectionwindow, manually operated closing damper and heat-treated woodenpackaging.Protected from entry of pests and can be cleaned with a high-pressurecleaner.Ensures excellent hygiene whether storing feed, food, granulates or woodpellets.
Range of Storage Material
CerealMeal FeedPelletsGranulesMineralsPillerand many more…
Range of Models
Modular silo – square or rectangularAgrosilo – square or rectangularMineral siloAuger Discharge SiloClean siloOutdoor Modular SiloRound steel silo
Find out More
Contact us to learn more about Silos @ [email protected]
MTI
Description
MTI is noted for its ability to turn customers’ wishes into individualmachine concepts. With nearly 2,000 machines sold and more than 40years of expertise and experience, they are the right partner for yourcompany. That’s why customers call them the mixing company.
In their own R&D Center, the heart of the company, they have a widevariety of mixing machines available for customer trials. The findingsgleaned from these tests form the basis for optimum customized machinedesign.
MTI is a competent partner not only in Europe but all over the world.With subsidiaries in North America and Asia, MTI is present on threecontinents. Furthermore, MTI have over 50 sales representatives for
11 of 55
customers to contact around the world if expert advice and technicalsupport are needed.
MTI Mixers – Highest Quality
Three factors are essential for outstanding quality and longevity of MTImixing systems:
highly-qualified employeesthe best materialsthe latest technologies
MTI employees receive the best education, are continuously trained toincrease their skills and have decades of experience. Some have workedwith the company for more than 30 years, their valuable knowledgecontributing significantly to the quality of MTI mixing systems.
All MTI mixers are manufactured with high precision and from high-quality materials. 15 to 36 assemblies first arise from 2,500 to 6,000machine parts in the first assembly step. In the second step, theassemblies are mounted to customer-specific mixers and subsequentlyequipped with State-of-the-Art control electronics according to currentEuropean safety regulations.
The whole production takes place under constant quality control inaccordance with DIN EN ISO 9001:2000. Before an MTI mixer leaves theplant, it is first checked for proper function and that it meets all customerrequirements.
Future-oriented Mixer Automation
The MTI control system is setting new standards for mixing andprocessing equipment with regard to safety, efficiency, economic benefitsand reliability. Not only fulfilling, but rather exceeding the requirementshas always been the motivation for innovation, which inspires MTI tohighest performance. Out of this passion for the best MTI has developedthe new control system.
By using one standardized control system for all customers worldwideMTI consequently continues the way of "One Global Level of Safety". As aminimum requirement, all MTI control systems are in full compliance withthe European Machinery Directive2006/42/EG and if requested extendedby national requirements. State of the Art-Technology is not onlydeveloped by MTI it is the solid base of every day’s work.
All MTI controls are programmed with the SIEMENS Totally IntegratedAutomation (TIA-Portal). This clear system structure allows the optimumintegration of all different control components in one uniform systemenvironment. With this strategy MTI sets standards again for the entireindustry.
Fully complies with the standards of the European Machinery Directive2006/42/EGSafe and reliable operation by integrated fault management and guidedoperator supportYour reliable partner for a smooth production flow in manual andautomatic operation modeModular design with strategy, reduction of components variety andoptimized spare part inventoryModern and reliable system architecture with Profi Net / Profi SafeFast and simple installation and start up by "Plug & Mix"Integrated fault managementWorldwide spare part supply through our partnersIntegrated remote service
Reconstruction of Vessels & Tools of All Makes
MTI Retro tec is the answer to the growing worldwide demand forreplacement mixing vessels and tools for heating/cooling mixercombinations, vertical mixers and horizontal cooling mixers of all makes.
12 of 55
The MTI Retro tec system has made it possible for the first time to recordand register data for such parts on site – quickly and inexpensively.
high-quality and economicalmuch extended service life – thanks to product-specific material selectionuse of existing add-on partsoutstanding price-performance ratiocomponent optimization and use of additional components, e.g. MTIaspiration system, lance for liquids addition, etc. …one-time on site measurement is sufficient for all subsequentreplacements
Find out More
Contact us to learn more about MTI @ [email protected] MTI @ mti-mixer.de/en
IBC
Description
When introduced in any manufacturing process, an IBC systemrepresents just-in-time manufacturing, providing a systematic approach tothe identification and elimination of wastage. Each IBC has a fixed volumeof material it can hold, giving accurate batch accountability.
IBC systems can be cleaned off place, thus significantly reducingdowntime cleaning. An IBC system is very flexible and mobile, and as yourbusiness grows, your existing IBC system can be easily expandedensuring maximum reusability your existing assets.
Range of Available Sub-systems
FillingDischargeIn-Bin BlendingWashing/DryingRaw Material IntakeControl PackageFormulation
Key Features
Systematic Discharge – Unique and patented Cone Valve designed forallowing systematic discharge to avoid segregation.Provides Containment – ceiling mechanism provides very good dustcontainment.Easy Connection – Zero manual intervention required when placed ondischarge station.
Find out More
Contact us to learn more about IBCs @ [email protected]
Knocker & Vibrator
Description
Enge Plas offers Electro-pneumatically actuated discharge aid forweighing hoppers, silos etc.
13 of 55
Key Features
Electrical control implemented as a separate unit or incorporated into theoverall control concept.Robust design, low maintenance.Easy to retrofit.Can be combined with further beaters.
Find out More
Contact us to learn more about Knockers & Vibrators @[email protected]
Monitor
Description
Monitor Technologies, LLC provides practical solutions in silo / binlevel indication, level measurement and inventory management for thestorage and processing of most powder and bulk solids, as well as, someliquids and slurries.
Monitor also offers solutions for solids flow monitoring, particleemission detection and bin aeration. For over 55 years they have strivedto provide high quality products, extensive application support and trustedcustomer service.
Monitor's Instruments are backed by:
Expert advice based on 55+ years of business in level indicationService department capable of in-factory product repairs or field serviceOn-time, quick deliveryPersonalized care; Hassle-free transactions2-Year Warranty on most productsISO 9001 registered quality system that continually pursues best businesspractices
Continuous Level Measurement:
Weight & Cable (Plumb Bob) Style Level SensorGet SiloPatrol SMU AppGuided Wave Radar Level
Point Level Indication:
Rotary Paddle Style Level IndicatorsRF Capacitance Level ProbesVibratory Level SensorsDiaphragm Style Level SwitchTilt SwitchesProximity Switches
Inventory Management:
SiloTrack Inventory SoftwareHMI2 Operator Interface
Moisture Measurement:
In-Line Moisture Measurement System
14 of 55
Mass / Solids Flow:
In-Line Microwave Mass Flow Measurement System
Solids Flow Detection:
Microwave Solids Flow Monitor
Particle Emission Detection:
Triboelectric Particle Emission / Broken Bag Monitor
Bin Aeration:
Rectangular Air PadEvasser and Flo-Pad
Common Target Materials:
Cement and aggregates, fly ash, coal salt / minerals, biofuels,chemicals, feed and grain, pet food, baking and snack ingredients, pulpand paper, pharmaceuticals, plastics and more powders and bulk solidmaterials. Also some slurry and liquid applications.
Find out More
Contact us to learn more about Monitor Technologies @[email protected] Monitor Technologies @ monitortech.com
Movacolor
Description
Movacolor is the first choice of plastics producers worldwide that strivefor excellence in both injection molding and extrusion. Movacolor doesn’tsimply meet customers’ demands for stable production, high quality,improved efficiency and lower costs and scrap volumes – they exceedthem because of our constant stream of innovations in dosing technology.
Movacolor’s leadership in dosing technology is based on over twentyyears of partnership with plastics producers. They understand that amongthe most common problems are color and wall thickness variations. TheMovacolor dosing technique is based on the in-line dosing of masterbatch,powder, regrind or liquid colorants into virgin material. They combine thedosing cylinder with a stepper motor to ensure consistent flow resulting inreliable color and wall thickness.
Broad product line of gravimetric and volumetric dosing machines
Movacolor develops and produces gravimetric and volumetric dosingunits and continuous in-line blenders for injection molding and extrusion.These systems meet the need for high volume, quality and reliability in thedosing of masterbatch, powder, regrind and liquids for producers of PETpreforms toys, household goods, automotive components, packaging,medical devices, profiles, pipes, cables, sheets, film and many otherproducts.
Constant dosing of masterbatch, powder, regrind and liquid
15 of 55
additives
Plastic manufacturing companies are looking for different qualities indosing systems. Some are looking for cost savings on colorants. Someare seeking a more stable production process. Others are attempting toincrease efficiency or improve quality. Movacolor systems give the plasticsmanufacturer all of these benefits in integrated systems for dosingmasterbatch, powder, regrind or liquid.
Dosing cylinder for regular output
Movacolor’s dosing cylinder is a proprietary invention. The cylinderensures regular output from the smallest doses (0,01 kg/hr) to the largest(1000 kg/hr). It has an incredibly large capacity range for a single dosingtool (0,7 - 18 kg/hr with GX dosing cylinder). Movacolor’s proprietarysystem solves the problems of irregular output and stoppages oftenencountered with traditional dosing devices based on augers or discs.
Stepper motor for exact speed
The Movacolor dosing cylinder is driven by a stepper motor. Thismotor is superior to a DC motor because it functions in steps. This allowsthe operator to adjust the speed of the cylinder very quickly.
Neckpiece for preventing material separation
The Movacolor neckpiece prevents material separation by introducingthe colorant directly into the machine throat.
Find out More
Contact us to learn more about Movacolor @ [email protected] Movacolor @ movacolor.com
Aeration Pad
Description
The aeration pad is an aeration device used to promote the flow of drybulk powders from a storage vessel. It operates by continuouslyintroducing air into the body of the dry powder.
When a powder is first conveyed into a storage vessel it is actually ahighly aerated mixture of air and particulate. In this state the mixture flowsquite readily. However, as the powder settles the solid particulate and airseparate resulting in a decrease in volume and an increase in bulkdensity. In this deaerated state powders can behave more like a singlelarge solid structure rather than a fluid-like mixture. By replacing thenaturally lost air, the air to particulate mixture ratio is held thus maintainingthe fluid like characteristic of the aerated powder.
Range of Applications
CementSoda AshCarbon BlackBentoniteLimeFly AshGypsumFlourResinsand many more…
16 of 55
Key Features
Effective radius of 10 inches (254 mm)Adapts to almost any bin Low costEasy installationMinimal maintenance
Find out More
Contact us to learn more about Aeration Pads @[email protected]
Fluidising Cone
Description
Fluidising cones are pneumatic discharge systems for poor free-flowing powdered bulk materials from silos and hoppers.
Key Features
Designed according to bulk material’s properties and operating conditions(flow properties, silo size, storage period, etc.)Prevention of segregation, bridging and funnelling by fluidising andmechanical effects.Operation with air reservoir or pulsator.
Find out More
Contact us to learn more about Fluidising Cone @[email protected]
Mechanical Conveyor
Description
Whether powders or pellets, it is only with experience, knowledge andthe right understanding of the complex behaviours of bulk materials thatwill get you a safely functioning and economically operating mechanicalconveyor system.
Enge Plas has been designing, building and installing mechanicalconveyor systems in many industries, over many years, moving manytypes of material in many challenging circumstances. The conveyingtechnologies we utilise are already adapted today to the constantlyincreasing production capacities, conveying distances and heights.
Range of Mechanical Conveyors for Different Applications
Tube Chain ConveyorsTrough-Belted and Transfer ConveyorsScrew ConveyorsHigh Intensity Separation ConveyorsMagnetic Crossbelt Conveyors
17 of 55
Shredder and Grinder Feeder ConveyorsBale Break Conveyors
Find out More
Contact us to learn more about Mechanical Conveyors @[email protected]
Pneumatic Conveyor
Description
Pneumatic conveyors transport powder, dust, pigments, granulatedmaterial, tablets, capsules, small parts etc. in an air stream underpressure or vacuum through hoses or pipes. They are easy to install andto operate. Even if leakages occur, no product can get into theenvironment.
Wide Range of Models
Pressure (+ve) or Vacuum (-ve)Dense phase or Dilute phase
Key Features
User friendly systems with safe material transfer.Easy material aspiration and dust-free loading of machines.Optimum hygiene conditions, in GMP quality.Simple to install and to operate.Low energy consumption.Favourable investment- and operating cost.
Solids Conveying Eductor
Converts the output of a blower into suction that can be used to entrainand feed powders, pellets, and bulk solids into a pneumatic conveyingsystem. Because they have no moving parts, they can operate almostentirely maintenance-free. The eductor acts to compress the air/solidsmixture to a pressure adequate to overcome losses in the downstreamconvey line.
No moving parts.No blowback.No mechanical shearing.
Find out More
Contact us to learn more about Pneumatic Conveyors @[email protected]
18 of 55
Shredder & Granulator
Description
Our shredders and granulators – small, medium, large and heavy-duty– cover regrind throughputs from a few kilos per hour up to several tonesper hour. By examining products and the amounts involved, we can helpyou select the right shredder or granulator and handling accessories bestsuited to your particular needs.
Range of Applications
Injection MouldingBlow MouldingPipes & ProfilesFilm & Sheet ExtrusionThermoforming ExtrusionEdge-trim GranulationFibre SeparationGeneral RecyclingPost Consumer RecyclingRubberE-WasteWoodand many more…
Key Features
Highest quality regrindConstant Cutting Circle, eliminate friction and heat, minimize dust andfinesDouble scissors cut, provide clean, smooth and energy saving cutting, freefrom dustMinimal energy consumptionQuick knife changing
Range of Options
Dust separating systemsGuillotine systems for quicker recycling of edge trimmingsMetal detectors to prevent machine damageMetal separators to remove metal from materialNoise control systems that can reduce as much as 10–20 dB(A)
Find out More
Contact us to learn more about Shredders & Granulators @[email protected]
Lump Breaker
Description
Lump breakers are designed to work in conjunction with other mills oras stand-alone coarse grinding mills in their own right. Robustly designedfor reliability during even the most arduous of duties, they are capable ofbreaking down large lumps of product, up to 150 mm diameter andreducing them to 2-3mm in preparation for further processing. Available incarbon steel, stainless steel 304L or 316L or special alloys like Hastelloy.
Narrow particle size distribution and minimal fines.
19 of 55
Can achieve rates from 2-25 tonnes/hour depending on material.Operator friendly, with no heavy items for operators to support duringcleaning.
Range of Applications
De-agglomerationBreaking down of compacted hygroscopic products that haveagglomerated due to dampness or compaction.Pre-millingPre-grind of very large lumps to a particle size small enough for furthergrinding.Coarse GrindingProduct is broken down for use in another process i.e. ingredients can besized for mixing, damaged products can be reclaimed for rework, filterpress cake can be broken to increase surface area for more efficientdrying.
Key Features
Versatile design, with easy to change grinding screens.Heavy duty and robust for tough lump breaking.Interchangeable beaters to suit process requirements.Cantilevered versions available (application dependent).
Find out More
Contact us to learn more about Lump Breakers @[email protected]
LaborSave
Description
LaborSave was created in 2004 when Benny Cohen visited a plasticfactory and saw workers manually emptying sacks of plastic pellets into ahopper. As he watched the repetitive task of lifting heavy sacks with aknife in their hands, he thought about how dangerous this is to theworkers' health. And when he saw how many pellets were strewn acrossthe floor, he realized how completely inefficient manual sack emptying is.
Immediately upon leaving the factory, Benny began drawing a sketchfor a machine that would provide an automatic solution.
At the K show in 2004, LaborSave made its debut and became anovernight sensation within the plastics industry. The technological solutioncoupled with the highest standards of craftsmanship was exactly what theindustry needed, however it was only as time went by, that the owners ofLaborSave realized the true value of the solution.
LaborSave, like the name suggests, was developed in response to theinefficient use of manpower, and was thought to help companies reducethe man hours required to open the sacks. Yet the true benefit tocompanies from LaborSave is the 99.99% emptying rate of the sackscontent, followed by the highest standards of safety which LaborSavebrings to the industry - effectively preventing untold workers injuries.
To date, LaborSave has been installed in over 400 factories across theglobe, and has opened nearly 50 million tons of raw materials.
Fully Automatic Sack Opening and Emptying System
LaborSave is the first, and most efficient, fully automated sack
20 of 55
emptying system in the world.
The key advantages include more than 99.99% emptying of rawmaterial, immediate reduction in labor costs and contamination risks, andunparalleled safety that is backed by approval from all the world's majorstandards institutes.
LaborSave incorporates the best in robotics, design and craftsmanship,and serves clients from multiple industries throughout the world.
99.99% emptying of sack contentEliminates contamination riskBacked by industry's best warrantyMeets and surpasses all industry standardsReduces employee cost and risk of injury
Advantages
We take pride in offering the most effective, (both in terms of cost andoperations) automatic sack emptying system in the industry.
ROIThe most important factor in every business decision is determining thevalue of a deal. The return on investment for LaborSave is fast, generallyreached in under six months. The combination of reduced labor costs,near complete reduction of raw material loss, 100% prevention of foreignmaterials from entering the hopper and a level of safety that is unmatchedare what gives the LaborSave its advantage over all other sack emptyingoptions.WarrantyLaborSave is backed by the industry's best warranty. No other companyoffers such extensive coverage. However, as the LaborSave wasdesigned to last indefinitely, it is truly a rare event that a LaborSaveexperiences downtime or requires a change of parts.StandardsAs the issue of employee safety continues to gain importance throughoutthe world, companies can literally not afford to be in a situation whereemployee safety is at risk. LaborSave has the highest level of safety, andis approved by all of the world's major Standards Institutes including CE,UL, TUV and GOST. In addition, LaborSave's factory is a state-of-the-artISO 1009 certified facility, comprising the most advanced steelworkequipment and managed by professionals who don’t compromise onquality.FirstLaborSave was the first to introduce a truly automatic sack emptyingsolution, and continues to lead the industry in product advancements. Wetake great pride in being first and are committed to providing the best to allof our clients. We have been around the longest, and will be around in thefuture.
Find out More
Contact us to learn more about LaborSave @ [email protected] LaborSave @ laborsave.com
Kason Kek-Gardner
Description
Formed with the key objective of supplying solutions based equipmentand systems to meet the needs of the Food, Pharmaceutical andChemical industries, Kason Kek-Gardner’s scope covers the completepackage from technical specification and proving trials through to SiteAcceptance Testing, handover and aftersales service. Kason Kek-Gardner are BSEN ISO9001 accredited (certificate No: FM553908) and allequipment can be supplied to suit ATEX requirements and are CE marked
21 of 55
where appropriate.
Mixing Equipment
Horizontal MixersThe Kason Kek-Gardner mixing equipment range of standard and custom-built horizontal mixers is designed for the consistent batch and continuousblending of powder and granules with capacities ranging from 35 – 60,000litres.Vertical MixersThe Kason Kek-Gardner vertical mixer is fast, accurate and versatile andis particularly suited to the mixing of free flowing, heat sensitive or fragileproducts.BlendersKason Kek-Gardner Blenders incorporate a gentle, low energy tumblingaction, ideal for blending the most delicate and fragile products. They alsoeffectively mix very heavy and abrasive products.Processors & ReactorsKason Kek-Gardner boasts a custom-built range of Processors andReactors for vacuum and pressure mixing applications, based on ourrange of horizontal mixers with either ribbon or ploughshare agitators andthe double cone blenders.
Size Reduction Processing
Kibblers (Pre-Breakers)Kason Kek-Gardner Kibbler pre-breakers are designed to work inconjunction with other Kason Kek-Gardner mills or as stand alone coarsegrinding mills in their own right. Kibblers are robustly designed forreliability in breaking down large lumps of product in preparation forfurther processing.Cone MillsKason Kek-Gardner cone mills are gentle, low energy size reduction millsideal for fatty, heat sensitive, sticky, moist or fragile products. Theyalleviate traditional milling problems of noise, dust and heat generationand are ideal for use in food and pharmaceutical applications.Universal MillsKason Kek-Gardner fine grinding universal mills are designed andconstructed for high performance, robustness, easy maintenance andsafety in use. Designed to withstand up to 10 Bar of pressure, a range ofmodels is available to suit a variety of process and throughputrequirements from a few kgs to several tons per hour.Air Classifier MillsThe Kason Kek-Gardner Air Classifier Mill offers fine grinding capabilityplus greater control over particle size distribution. Air Classifier Mill serveall industries producing fine powders where control of grindingtemperature and a narrow particle size distribution is of prime importance.Centrifugal (Rotary) SiftersAll Kason Kek-Gardner Cantilever design, Centrifugal (rotary) powdersifters comply with Essential Health and Safety Requirements relating tothe design and construction of equipment intended for use in potentiallyexplosive atmospheres. Each rotary powder sifter in the range is certifiedas ATEX compliant to Zone 20 internally and Zone 21 externally.The Cantilever design Kason Kek-Gardner Centrifugal Powder Sifter isarguably the best in the industry. It provides users with higher standardsof hygiene and ease of operation and can be used on a variety ofapplications including classifying, policing and de-dusting.The cantilever design is available in all but the largest machine in therange, allowing throughputs from a few kgs per hour to many tons perhour.
Find out More
Contact us to learn more about Kason Kek-Gardner @[email protected] Kason Kek-Gardner @ kekgardner.com
22 of 55
Mill
Description
Enge Plas offers a wide range of milling technologies to meet theneeds of the powder processing industry, with standard machines andcustomized solutions both available to satisfy all applications.
Cone Mill
Cone granulation mills are gentle, low energy size reduction mills idealfor fatty, heat sensitive, sticky, moist or fragile products. They alleviatetraditional milling problems of noise, dust and heat generation and areideal for use in food and pharmaceutical applications.
A number of different grinding media and drive arrangements areavailable for our cone granulation mills. This enables us to satisfyindividual process, operational, cleaning and installation requirements.
Universal mill
Fine grinding Universal mills are designed and constructed for highperformance, robustness, easy maintenance and safety in use.
Construction of our grinding mills can be of carbon or stainless steeland, where required, can be designed to withstand over pressuresituations of up to 10 Bar. A range of grinder mill models are available tosuit a variety of process and throughput requirements from a few kgs toseveral tons per hour.
Typical requirements are to grind materials of up to 3 Moh hardness towithin the ranges of 30 - 500 micron particle size.
Air Classifier Mill
Air Classifier Mill offers fine grinding capability plus greater control overparticle size distribution. Typically grinding to a particle size in the regionof D97 = 10µm, the Air Classifier Mill serves all industries producing finepowders where control of grinding temperature and a narrow particle sizedistribution is of prime importance.
Particle size is controlled by fully adjustable rotor speed, classifierspeed, airflow rate and feed rate. For operational efficiency, mills areavailable with easy clean designs that include the fully opening “clamshell” body and several other options where process considerationsdemand easy access for inspection, cleaning and maintenance.
This feature is of particular benefit to multi product users who needquick product change over with no cross contamination.
Find out More
Contact us to learn more about Mills @ [email protected]
Screening Machine, Sifter & Classifier
Description
Enge Plas offers a wide range of screening, sifting and classifyingtechnologies to meet the needs of different industries, from vibration andlong-stroke screening machines to centrifugal and vertical sifters, eachtype available in various models and sizes, with single- or mult-deck
23 of 55
execution for all applications.
Tailored to special requirements, our machines offer good customerbenefit and are very well accepted due to their efficiency, reliability andease of operation, low noise emission and high separation quality.
Vibration Screening Machine
High screening output by reducing delay time considerablyVibration motors run silentlyShort downtime thanks to a simple, quick change of screensCompact & modular construction allows the machines to be adaptable andspace-efficientDesigns available in ATEX or also in GMP upon request
Long-stroke Screening Machine
High levels of selectivity of up to 98%Product-protecting screening processLow noise emissionLow energy consumption (e.g. 0.75kW at a screening surface of 1.5m²)Easy sieve replacement and quick cleaningLong service life with low input and maintenance effort
Centrifugal Sifter
Range of different screen options including; nylon, woven wire and wedgewireEfficient design of screen area to machine sizeCantilever DesignNo oversize end bearings or sealsHinged oversize end doorEasy to remove sifting screen and screen retainerHygienic design sifting screenNo tools required for screen, paddle and screw removalFully rotating screen for in-situ inspection
Vertical Sifter
True vertical in-line design with no offset between inlet and outletCompact easy to clean and maintainVibration free operation with excellent dust containmentHigh capacity in relation to size & power requirementsLow noiseEasy identification of containment type and amountCan be used with wet or dry products
Solid-Liquid Separator
These machines offer a compact, yet high capacity solution to theproblem of removing solids from all types of liquids including highviscosity ones which are difficult to handle on normal vibratory machines.Typical uses include:
De-watering of plastic & rubber granulesWaste water and sludge pre-treatment to remove gross contaminationRemoval of un-dissolved product from latex rubber liquids etc.Separation of "curds & whey"Check sieving and homogenization of sauces, purees and emulsions
Find out More
Contact us to learn more about Screening Machines, Sifters & Classifiers@ [email protected]
24 of 55
Screen & Mesh
Description
To ensure safe and efficient screening processes, material, apertureshape, weave, and screening machine must be optimally adapted to theproducts to be screened. Our range of screens and meshes comprisessolutions for all types of screening machines and applications: classicalscreen sections made of high-tensile or non-corrosive stainless steels, aswell as special self-cleaning screens and hybrid screen sections with wirecloth cast in polyurethane. No matter which screen type you select, high-quality materials and processing warrant not only optimum functionalitybut also maximum stability and lifetime.
Wide Range of Models
Classic square or rectangular apertures, all sizes.Flat top screens or crimp (single or double) screens.Side tensioning or end tensioning, standard or double fold hook.Different steel screens for different applications.Options include silicon- or rubber lip seal, 180° edge folded.PUR-strips for extra wear protection.
Self –cleaning Screens
The FLEX-MAT 3 is a new generation of self-cleaning screen mediawhich ensures another significant improvement of the self-cleaning effect.Contrary to the existing products, the horizontally crimped warp wires arenot fixed by cross wires but exclusively by recyclable polyurethane strips.The distinctive lime green strips permit each wire to vibrate individuallyover its entire length, for even more efficient prevention of clogging,blinding and pegging. In addition to the high flexibility of the wires, thesmooth screen surface helps to significantly increase the wear lifecompared to that of traditional wire screen sections.
For ultra-fine products with cut size up to 0.5 mm and coarser materialswith cut sizes up to 100 mm.Because of the excellent wear properties, thinner wires can be used. Withthis extension of open area and additional capacity, productivity can beincreased in many cases by up to 40 %.Four different styles offering best specification for almost any application. Available in Optimum Wire® spring steel or stainless steel, usable acrossend- and side-tensioned screening machines and on all common modularscreen decks.
Ultrasonic Screens
The Ultrasonic screen’s generator converts electrical energy into high-frequency energy which is then converted to mechanical energy by theconverter.
The sound waves cause the screen frame or sound conductor tooscillate at high-frequencies. These oscillations are transferred to thescreening cloth where they are evenly distributed. The oscillations of thescreening cloth reduce the frictional resistance between the grains and thescreen. This reduces the tendency towards blockage, resulting inincreased throughput.
Delivers efficient sifting of powders with split cuts of ≤ 500 µm.Improves throughput.Helps the breaking down of agglomerates.Reduces amount of excessive grain.Ensures long-term cleaning effect.
25 of 55
Find out More
Contact us to learn more about Screens & Meshes @[email protected]
Mixer & Blender
Description
Enge Plas offers an extensive range of mixers and blenders. Ourmixers & blenders are capable of processing a vast range of ingredients.We can design and build customised mixers which meet the specificprocess requirements of our clients, including ATEX compliant mixers.
Wide Range of Models
Horizontal MixersRange of standard and custom-built horizontal mixers designed forconsistent batch and continuous blending of powder and granules withwide range of capacities.Vertical MixersThe vertical mixer is fast, accurate and versatile and is particularly suitableto the mixing of free flowing, heat sensitive or fragile products.BlendersBlenders incorporate a gentle, low energy tumbling action, ideal forblending the most delicate and fragile products. They also effectively mixvery heavy and abrasive products.Processors & ReactorsCustom-built range of processors and reactors for vacuum and pressuremixing applications, based on our range of horizontal mixers with eitherribbon or ploughshare agitators and the double cone blenders.
Typical Special Features
Pressure / vacuum rated vessels.Jacketed vessels for heating or cooling.Cantilever Mixers for ease of cleaning.Continuous mixing applications.Turn-key mixing stations.Range available - 3 litres up to 100,000 litres.
Find out More
Contact us to learn more about Mixers & Blenders @[email protected]
26 of 55
Metal Detector
Description
We offer a range of metal detection technologies, applicable forconveyor belts, chutes and roll goods, bulk materials, pipe systems,including control units with touch-screen and networking capabilities forremote diagnostics etc.
Metal detectors for conveyor belts, chutes and roll goods
Series BDhigh level of detection since the magnetic field surrounds the productsstainless steel housing with long-time stable and water-tight encapsulationavailable in various detector sizes, adapted for the productfulfills all the requirements in effect currently for AUDITS according toHACCP / IIFShygienic designSeries TUdividable stainless steel housingstainless steel housing with long-time stable and water-tight encapsulationavailable in various detector sizes, adapted for the producteasy integration, since housing is dividableSeries SP / AReasily integrated in conveyor belts, since it can be installed flushlong-term stable, fully encapsulated in extremely stable metal housingbelt stop or reverse motion operation available using reversing contactorcircuitryexternal control electronics with RESET/START-STOP buttonstandard detection widths to 1,200 mmno metal-free zones
Metal detectors for bulk materials
Series VAextremely sturdy and compact stainless steel housingdevice-specific material throughput of up to 14,000 l/hstainless steel ejection unitoptionally with wear-resistant product pipeoptionally high-temperature applicationSeries Yextremely effective, quick-reacting pneumatic outward transfer systemseparates metal from slow back-pressure material columnsdevice-specific material throughput of up to 5,400 l/hextremely flat mounting heightoptionally high-temperature application
Metal detectors for pipe systems
Series extraktorunique ejection system for integration in suction conveyor – the pipesystem remains closed during the ejection of metal impurity!easily integrated into the suction conveyor line with hose connectionadjustment-free separating, irrespective of material speeddevice-specific material throughput of up to 3,300 l/ho optionally inwear-resistant modeltwo large inspection doors
Control units
M-Pulse2four-quadrant technologymulti-frequency technology
27 of 55
touch screen / graphical displayhigh-precision product effect offsettingunlimited product memory spacesnetworking / ethernet / USBcomprehensive support for peripheralsremote diagnosticsdisplay transmitted by RS485
Find out More
Contact us to learn more about Metal Detectors @[email protected]
ISL
Description
ISL was incorporated in the United Kingdom by Mr. Ivan Semenenko inthe year 2000. Prior to ISL, he was the original inventor of the ‘ConeValve’ technology. Asia saw a rapid growth of industrialisation in the early2000. Taking advantage of this, ISL Asia Technologies Pte. Ltd wasincorporated in 2002. Since its humble beginning in the year 2002, ISLAsia Technologies serves customers worldwide.
In process-based industries, some of the raw materials come inpowdered or granular form. These raw materials come in various types ofpackaging. ISL manufactures Intermediate Bulk Container Systems (IBC)for storage, transfer and discharge of powders.
Key Features
Integrated System Provides ContainmentISL’s ‘Cone Valve’ has an integrated system which promotes and controlsproduct flow. Other container systems: Use discharge valves such asbutterfly valves and slide-gate valves that does not promote flow ability.Systemic Discharge Easy ConnectionWhen the Cone Valve is lifted for discharging the product or blendedmaterial, there is systematic discharge of materials to avoid Segregation.Other container systems: When blended materials are stored, segregationis the main problem during discharge.Provides ContainmentISL IBC’s when placed on the discharge station, the ceiling mechanismprovides a good level of dust containment. ISL also provides high level ofcontainment systems for critical powders for pharma and specialitychemicals.Easy ConnectionWhen ISL IBC system is placed on the discharge station, no furthermanual intervention is required. Other containment systems: Some levelof manual integration is required.
Role of IBCs
Lean ManufacturingWhen introduced in any manufacturing process, an IBC system provides asystematic approach to the identification and elimination of all kinds ofwaste. It is also another form of Just-in-time manufacturing.Batch AccountabilityAs each IBC has a fixed volume of material it can hold, it gives anaccurate information on Batch Accountability.Flexible Manufacturing An IBC system is not a fixed and rigid system. Since the IBCs are mobilein the manufacturing process, it is a flexible form of manufacturing option.Lower DowntimeIn manufacturing industry, most companies require equipment to be
28 of 55
cleaned. IBC systems can be cleaned off place, thus significantly reducingdowntime cleaningExpandable SystemIf the business grows, more IBCs and discharge stations can be installedin the manufacturing process, without the need to discard the old system.
Find out More
Contact us to learn more about ISL @ [email protected]
J. Engelsmann
Description
The successful development of J. Engelsmann AG is marked bytradition and progress. The company history goes back to the year 1873,when Jean Engelsmann started the production of millstones and millequipment in Ludwigshafen. We look back on more than 140 successfulyears. Their engineers design and construct process machines andcomplete plants for the customers of today and the market of tomorrow. J.Engelsmann supply customers in the chemical, pharmaceutical, plasticprocessing and food industry as well as many companies processing bulkgoods.
J. Engelsmann deliver high-quality products due to the use of hightechnology. Highly qualified skilled workers and modern fabricationmethods ensure precise production and flexible acting. Research,consulting, inspections and maintenance are examples of theircomprehensive customer service. The worldwide selling to differentcustomers is guaranteed by a wide range of products, a large network ofrepresentations and sales offices as well as presence in the internet.
J. Engelsmann central idea has always been:
"Offering our worldwide customers high quality, high availability andoptimised service."
Screening Technology
Engelsmann screening machines are used all over the world. Theproduct portfolio ranges from vibration and centrifugal screeningmachines to long-stroke screeners. Tailored to special requirements,Engelsmann screening machines offer a high customer benefit and arevery well accepted due to their efficiency, reliability and ease of operation.
Convincing energy efficiency and high separation quality (98%) as wellas low noise emissions, screening machines made by Engelsmann offerall that is necessary for economic screening of bulk solids.
From classifying screeners for several fractions to online particlemeasurement for monitoring of the screening process – we have asuitable solution for you.
Screening technology of J. Engelsmann AG includes the areas of:
Vibration Screening MachinesLong-Stroke Screening MachinesCentrifugal Screening MachinesCrushingParticle Measuring Device
Mixing Technology
Mixing technology of J. Engelsmann AG consists of:
Free-fall MixersThrust and Turbulent Mixers
29 of 55
Dryers
Handling Technology
Handling technology of J. Engelsmann AG consists of:Discharging DevicesBig-Bag Filling UnitsJEL FlowStopBig-Bag Emptying UnitsBig-Bag Connection JEL SafeConnectJEL ProtectBag Emptying UnitsContainer Emptying UnitsLifting columns
Laboratory Technology
Laboratory technology of J. Engelsmann AG consists of:Jolting Volumeter STAV-IITest Screening Machine JEL 200-IILaboratory Drum Hoop Mixer RRM Mini-IIAutomatic Pigment Muller JEL 25/53-II
Find out More
Contact us to learn more about J. Engelsmann @[email protected] J. Engelsmann @ engelsmann.de/en/servicemenu/home.html
Brand Movacolor
Magnet
Description
Enge Plas offers a line-up which includes units designed to removemetal contamination from dry particulates, liquids, and slurries in gravity,mechanical, or pneumatic conveying systems. These are widely used inthe food, dairy, grain, chemical, plastics, oil, textile, recycling, and otherindustries.
FF Drawer
FF Drawer Magnets are built with strong Rare Earth magnets forstrong holding force. They are temperature compensated with stainlesssteel construction. For the Plastics and Recycling industries.
HF Drawer Magnets
HF Drawer Magnets are for gravity flow applications. They house twoor more magnetic cartridges for efficient product separation. For allindustries – Food, Grain and Milling, Powder and Bulk, Recycling, andPlastics.
Plate Magnets
Plate Magnets capture fine metal particles and chutes, suspendedfrom powdery, moist, clumpy, abrasive or bulk materials. Various modelsavailable. For all industries including, Food, Powder & Bulk, Grain &Milling, Recycling and Plastics.
30 of 55
Magnetic Liquid Traps
Magnetic Liquid Traps remove ferrous tramp including 400 seriesstainless steel and work-hardened stainless steel from liquid processingand conveying lines. Comes in several styles of traps with High-energy,temperature compensated Neodymium Magnets. Metal Detectablegaskets are standard. For the Food and Powder and Bulk Industries.
Drum Magnet
Drum Magnet Separators come in 3 grades of Rare Earth Magnetsand are self-cleaning. They provide continuous removal of ferrouscontaminants from product flow.
Hump Magnets
Hump Magnets are for high-volume product flow. Offset design breaksup clumps and directs material into magnetic field. Self-cleaning modelavailable. For all industries.
In-Line Magnets
In-Line Magnets are for Gravity or Pneumatic flow applications.Enclosed pipe systems for unobstructed product flow. Rare EarthMagnets are standard. For all industries.
Magnetic Cartridges & Grate Magnets
Grate Magnets and Magnetic Cartridges are engineered to achievebalance between reach-out and holding force. Can be used in allindustries.
TurboGrate™ Magnetic Separator
TurboGrate™ Magnetic Separator features a powerful motorizedrotating grate magnet to remove ferrous metals from powder and granularmaterials. For the Food and Powder & Bulk Industries.
Wedge Magnets
Wedge Magnets are designed for narrow chutes and protect againsttramp metal damage for pellet mills. Shape diverts product flow acrosscollection surfaces. For all industries.
Torpedo Magnets
Torpedo Magnets are used in “Just-in-Time” hopper loaders. Theyprotect plastic molding machines by capturing tramp metal before enteringmachine. For the Plastics Industry.
Cleaning Systems
Cleaning systems use magnetic and electronic separators to removeboth ferrous and nonferrous contaminants efficiently from free-flowingvirgin resins, regrind, and recycled plastics.
Find out More
Contact us to learn more about Magnets @ [email protected]
31 of 55
Extruder
Description
Enge Plas provides total solutions for the processing technology fromraw material feeding to the entire downstream periphery, from throughputrates of 1 kg/h to 100 t/h. With individual adaptation to our customers’applications we are able to guarantee maximum throughput rates at thegreatest possible economy and quality for our extrusion machines andplants.
Comprehensive Product Range
ZSK seriesCombines the results of more than 50 years of process and processingcompetence. It is the high-end, high-tech heart of our systems with themaximum torque, speed and free volume.STS Mc11 seriesFeatures a high degree of standardization. It combines the processtechnology expertise in Germany with serial production in China at anattractive price-performance ratio but still certified according to CEstandards.CTE PLUS seriesOffers a new twin screw compounding system with a very attractivecost/performance ratio. The precise manufacturing of the CTE PLUSseries ensures the economical processing of a wide range of applicationsat high product quality.Module and complete systemsGives customers a compounding system pre-assembled fromstandardized components and integrated into the steel structure that offerseverything from the raw material feeding to the entire downstreamequipment.
In addition, we also offer peripheral equipment, which we developedourselves. This equipment such as melt pumps, screen pack changersand pelletizers is optimally adapted to our compounding systems.
Find out More
Contact us to learn more about Extruders @ [email protected]
Dryer
Description
Enge Plas provides a diverse range of drying equipment – dryers,drying hoppers and systems for general-purpose and special-marketapplications, with throughputs ranging from 1 to 2000 kg per hour.
Comprehensive Product Range
Electric Dryers – Central & MobileGas-fired DryersCompressed Air DryersHot Air DryersDrying HoppersResinWorks – Central Drying SystemEnergySmartCrystallizerIRD
32 of 55
Drying Monitor
Find out More
Contact us to learn more about Dryers @ [email protected]
Feeder & Dosing System
Description
Feeders and dosing systems are often classified by the meteringdevice employed to discharge material into the process. Each device isengineered to handle specific types of materials and the challenges theypresent. Most of these material delivery methods may be configured foruse in volumetric or gravimetric modes.
Comprehensive Product Range
Screw Feeders come in a great variety of sizes and are widely employedin both volumetric and loss-in-weight feeding applications. Single ScrewFeeders handle free-flowing materials such as pellets and powders. TwinScrew Feeders handle more difficult materials such as pigments, sticky,bridging or flooding powders, fiber and fiberglass.Vibratory Feeders offer gentle feeding of free flowing flakes, powders andother friable products.Bulk Solids Pump (BSP) Feeders are designed for gentle and precisefeeding of free flowing pellets, granules, flakes, powders and other friableproducts.Weigh Belt Feeders are perfect for gentle high rate feeding or metering offree flowing or friable products or where low headroom is an issue.Loss-in-Weight Belt Feeders provide the same gentle handling of fragilematerials as a Weigh Belt Feeder but with the precision of loss-in-weightcontrol.Liquid Loss-in-Weight Feeders employ SFT II weighing technology formore accurate gravimetric feeding of liquids.Smart Flow Meters are ideal for gentle high rate feeding or metering offree flowing or friable products.
Models Designed for Specific Application Needs
We also provide a number of feeder lines to address specific feederapplication requirements:
Volumetric and Gravimetric Blenders for the plastics compounding andextrusion processesMicro-ingredient and Compact Feeders for high accuracy at low feed ratesQuick Change Feeders for quick cleaning and increased productionflexibility to interchange single and twin screw feed modulesPharmaceutical Feeders offer sanitary construction with two levels ofsurface finish and quick disassembly for easy cleaning
Find out More
Contact us to learn more about Feeders & Dosing Systems @[email protected]
Haver & Boecker
Description
33 of 55
The production programme comprises thousands of types of wovenwire cloth, of which more than 3,600 are kept in stock. Many patents,registered designs and brand names are evidence of the current and on-going development of their product range.
They aim to exceed customers’ expectations with a consistently highproduct quality, and hence strengthen leadership in the market.
Haver & Boecker’s technical woven wire cloth is used for screeningand filtration purposes by many industries: chemical, plastic, automobile,aeronautic, aerospace, electronic, industrial screening (mining andquarrying), test sieving, food and many others.
Besides its technical qualities, their woven wire cloth has a highaesthetic value. Hence many architects and designers have becomeinterested in using woven wire cloth products, especially since the 1990s.
Screen Section for all Types of Vibrating Screens
We manufacture Industrial Wire Screens for all types of VibratingScreens. The great variety of available Vibrating Screens necessitates"tailor-made" Screen Sections: hook strips, notches, overlaps, reinforcedsides, integrated polyurethene strips and many other specialrequirements, all of which we are able to supply.
Standard hook stripDouble fold hook strip for end tensioning. Silicon- or rubber lip sealingoptionalEdge folded 180° with eyeletsEdge reinforced with PUR-foil. Eyelets optionalMultilayer screen sections reinforced with PUR-foil
Exciting Mesh. Ultrasonic Screening Systems
HAVER & BOECKER, a leading manufacturer of high-precision wire clothand screens and ARTECH Ultrasonic Systems AG, a subsidiary of Crest-Holding and specialist in ultrasound technology, are collaborating toprovide custom-made ultrasonic screening systems with frequencyvariation.
FLEX-MAT 3
Self-cleaning screen sections have been a well-established screen mediafor several years, in particular when processing difficult-to-screen bulkgoods.With FLEX-MAT 3 by our partner company Major Wire, Haver & Boeckeris now offering a new generation of self-cleaning screen media whichensures another significant improvement of the selfcleaning effect.Contrary to the existing products, the horizontally crimped warp wires arenot fixed by cross wires but exclusively by recyclable polyurethane strips.The distinctive lime green strips permit each wire to vibrate individuallyover its entire length, for even more efficient prevention of clogging,blinding and pegging. In addition to the high flexibility of the wires, thesmooth screen surface helps to significantly increase the wear lifecompared to that of traditional wire screen sections.
Find out More
Contact us to learn more about Haver & Boecker @[email protected] Haver & Boecker @ www2.diedrahtweber.com/en/applications-products/industrial-wire-screens.html
34 of 55
Polymer Filtration System
Description
Enge Plas offers not only Filtration Systems, but also completesolutions, e.g. rheologically optimized melt filter-pump combinations. Onefocus of our work is the processing technical optimization of theintegration of the individual components as well as of the line concept.
Range of Options in:
Screen ChangersFilter ElementsDischarge Valves
Comprehensive Range of Applications
Film / SheetOriented FilmFlat & Cast FilmFoam SheetBlown FilmFiberTechnical YarnTextile Fiber/FilamentStaple FiberNonwovensSpandex ManufactureSemi-finished ProductsPipesSheetProfilesTubesCompoundingResinsMonomerPolymerRecyclingRecycling in generalPet Bottle Flakes
Find out More
Contact us to learn more about Polymer Filtration Systems @[email protected]
Gneuss
Description
With more than 30 years of experience and over 60 internationalpatents, the family-owned and operated company Gneuss has made aname for itself as a supplier of innovative solutions for the plasticsprocessing industry.
Based in Bad Oeynhausen, Germany, Gneuss is committed to theexpectations of products “made in Germany” while serving its customersworldwide. With its daughter company in the USA, offices in Brazil andChina, a cooperation partner in Japan and together with representativesworldwide, Gneuss is present throughout the world. The best possibletechnical support, excellent service and spare parts availability is providedon all five continents. Support is available around the clock via a
35 of 55
telephone service hotline. Pilot lines for trials and development work areavailable at several locations.
Gneuss’ company philosophy is to work together with you, based onconfidence and personal relationships. They are dedicated to providingcompetent advice and to supporting you with the best know-how and themost modern technology, and to always offer you an optimum filtrationsolution.
Processing Technology
Gneuss’ MRS Multi Rotation System offers new possibilities in theventing or devolatilization of polymer melts.
MRS ExtruderVacuum TechnologyControl TechnologyOnline Viscometer VIS
Filtration Technology
The patented Rotary Filtration Systems enable fully automatic, processand pressure constant filtration.Screen ChangersApplicationsFilter ElementsDischarge ValveComplete Systems
Measurement Technology
Gneuss Melt Pressure and Temperature Sensors are characterized bytheir extremely high precision, combined with a high degree ofrobustness.Pressure TransducersTemperature SensorsSafety SystemsAmplifierAccessoriesSupport
Polyester Technology
Gneuss ‘unique technologies are being used worldwide for many yearsnow and they are particularly well established in polyester processingapplications. RepelletizingSheet ManufactureFiber ManufactureIndustrial Waste RecyclingStrapping Tape Manufacture
Find out More
Contact us to learn more about Gneuss @ [email protected] Gneuss @ gneuss.de/?lang=en
36 of 55
Rotary Valve
Description
Rotary valves are used for feeding bulk materials into pneumaticconveying systems and discharging out of hoppers and silos. We carry thelargest product range worldwide, and are able to fulfil all requirements ofa modern bulk handling plant in all sizes and pressure ranges.
Rotary valves for powders:The advantages of our application know-how: Large inlet. Restriction freeproduct flow. High degree of fill.Rotary valves for pellets:The advantages of Coperion valves for pellets: Patented anti-choppinginlet geometry. Safe starting under full product load.
Wide Operating Temperature Range:
Standard Version : -20°C up to 60°COption 1 : Up to 220°COption 2 (High temperature): From 220°C
Rotor Options:
C-RotorClosed end rotor with wide end platesAxial fitted with a narrow gapUsed for abrasive productsX–RotorClosed end rotor with additional blades on both sidesUsed for fibrous products
Blade Options:
Chamfered BladesReduction of the surface by relief grindingDecrease of the friction with powdersScraper BladesScraper blades for scraping of build-ups in the housing boreUsed for adhesive and sticky productsShallow Pockets (F-design)For better discharge performance or volume reductionUsed for adhesive and slightly cohesive productsSeal PurgeGas purged labyrinth rings to protect the shaft seal at open end rotors forpowder application
Quick Cleaning Options
.1 Executionrotor can be dismantled at the quick cleaning execution without anyadjustment.2 ExecutionSingle sided coupling at the rotor shaftSide cover and rotor can be dismantled as unit.3 ExecutionDouble sided coupling at the rotor shaftSide cover and rotor can be dismantled as single parts
Find out More
Contact us to learn more about Rotary Valves @
37 of 55
Diverter Valve
Description
Ideal for handling dry bulk material in gravity flow, dilute phase ordense phase pneumatic conveying applications. Enge Plas’ range ofdiverters are designed and engineered with two main principals in mind:
extend the service life of the valve andperform maintenance without taking the valve out of line
Our valves serve many industries including chemical, cement, coal,food, frac sand, grain, minerals, petrochemical, pharmaceutical, plastics,polymer, rubber and mining.
Typical Key Features:
Serviceable while in-lineWear compensating hard polymer sealsUnobstructed openingShift “on-the-fly”Diverts or converges material flowPositive seal of dust and fine powdersRemovable access doors for internal inspection, cleaning andmaintenance
Diverse Range:
Wye Line DiverterTo handle dry bulk solids in vacuum or dilute phase pneumatic conveyingsystems with pressures up to 1 barA full flow orifice provides unrestricted conveying of materialPositive seal through closed portSeal Tite DiverterFor use in gravity flow applications where material can be diverted fromone source to either two or three destinationsLeading edge of blade protected from material flowInternal access without toolsFlex Tube DiverterEliminates material cross contamination through a positive seal across theclosed port.No pinch points or exposed moving parts for safe operationAggregate DiverterFor demanding handling of material such as sand, gravel, whole grains,and coalOptional replaceable abrasion resistant linersHeavy-duty bucket that addressees material impact and wearBucket seals reduce interior dustingTLD DiverterFor use in gravity flow applications handling abrasive materials such ascoal and frac sandLeading edge of blade protected from material flowGravity Vee DiverterTo divert dry bulk solids in a gravity flow conveying system.Allows for material flow through both outlets simultaneously, one outlet ata time, or a complete shut-off of flowSeals protected from material flow streamMulti-Port DiverterMulti-port design eliminates need for complicated hose manifold stations. Helps address potential errors when manually switching hoses and greatlyreduces safety hazardsMechanically self-cleans on opening strokePivoting Chute DiverterTo handle abrasive materials in gravity flow applications.
38 of 55
Body houses an internal chute constructed of abrasive-resistant metal orlined with optional material that offers superior wear resistanceDust tight to atmosphere
Typical Range of Options:
Horizontal or vertical valve orientationAvailable in 2, 3, or 4-way configurationsMaterial construction options availableStandard or custom sizesOptional interior dead-pockets allow material to impact on itself reducingwear
Find out More
Contact us to learn more about Diverter Valves @[email protected]
Sampler
Description
Enge Plas supplies zone samplers used for taking samples of bulkgoods of any kind.
The big advantage of zone samplers is that all-layer samples can becollected from all layers of the container. Various bulk goods can becollected with the lances, from the finest powder to large grains such ascorn or nuts.
The zone samplers are available in different lengths. 55 cm (only Multi,Uno and All-layer sampler) especially suitable for sacks, 85 cm long(especially for barrels, tubs, mixed containers) and 150 cm as well as 250cm (only Jumbo sampler) for big bags, silos, tanks.
Safe and reliable sampling is made even easier with useful specialaccessories such as sealing sleeves, Quali-Paper, cleaning brushes,emptying devices and close-it control seals. The zone samplers areavailable in different models for different sampling tasks.
Smallest possible gap between the inner and the outer tubeEasy cleaning, removable tipColour coding (Multi and Uno sampler)Ultra-pure materialsExcellent processing, robust model
Diverse Range
All Layer Samplerfor cross-section samples through all layers of the sampleMulti Samplerseveral point samples for a separate analysisUno Samplercollects a targeted sample at a predetermined siteJumbo Samplerfor sampling coarse grains or larger quantitiesZone Sampler Spiralustaking precise zone samples through all layersEasy Samplerfast and easy emptying of the sample via the tipAll Layer Drillspecial zone collector specifically designed for heavily compactedsubstancesSilo Drillif bulk goods are transported over long distances (in trucks, railway goods
39 of 55
wagons), separation may occurSilo Sampler SiloPickerideal for taking bulk goods samples from silosAll Layer Scratcherspecial sampler for powders and granules that do not flow freelyScratcherdesigned for sampling cohesive, caked and not free-flowing substancesValve LanceSampler for all-layer samples of viscous, paste-like, semi-liquidsubstancesNovartos Multi & Unofor sampling according to FDA guidelines for Unit-Dose-SamplingMicro Samplerdesigned for the sampling of small quantities of powderPharma Pickerfor sampling very small quantities of highly potent, expensive or activepowders for analysisStickProoffor powder in the pharma area, made of stainless steel V4A, material1.4404PharmaScoopdeveloped in order to meet the high requirements of the pharmaceuticalindustry, such as those contained in the FDA regulationsPharmaSpoonfor taking samples of powdery substances, intermediate products andmaterial in the pharmaceutical industryMini ViscoSamplerfor viscous substances such as pastes, mud, creams, oilsSampling lance Milkyuniversal powder and granules sampler made of stainless steel V4ASampler Tubusfor pourable bulk goods up to approx. 1 cm in diameterQuickPickersuitable in the event that bulk goods are taken directly from sacks or bagsand have to be filled into the original sampling bottle directlyStainless Steel Spatulahighly stable and solid design of the spatula allow it to pierce solidsubstances or sacks and Big BagPigment Lancesample pigments, pastes and agglomerating bulk goodsQualiRod Conicalideal for cutting out samples for quality control from soft, paste-likesubstances (cheese, butter, clay, soap, wax, etc.)PowderProoffor mobile sampling of powders and granules
Find out More
Contact us to learn more about Samplers @ [email protected]
Bulk Heat Exchanger
Description
In many handling processes of bulk materials it is necessary tothermally treat powders or pellets, ie to cool or to heat them.
The heat exchanger Enge Plas supplies is a high-efficient cost-savingapparatus, compact in design. For many industries, eg plastics, food,fertilizer or chemical, this offers an ideal solution for thermally treating therespective bulk materials.
Range of Options
Gravity
40 of 55
Original design was developed for free-flowing coarse powders andpellets. Bulk material flows from top to bottom due to gravitational forces throughthe vertical tubes which are surrounded by a heating or cooling mediumon the shell side.As a result the bulk material is either heated or cooled.Inline GravityIf vertical installation in the process building is not possible due to lack ofheight, this can be used for free-flowing coarse powders and pellets.Heat exchanger is then integrated into a pneumatic dilute-phaseconveying system and the heat exchanger can be positioned as required.Also attractive for retrofitted systems, as it can be installed during theongoing production process at variable locations.InlineDeveloped especially for fine powders.The principle of this is the direct installation of the heat exchanger in avertical pneumatic conveying line. Pneumatically conveyed powder is fed into the vertically positioned heatexchanger from below with the conveying gas.
Find out More
Contact us to learn more about Bulk Heat Exchangers @[email protected]
Dust Collector
Description
The purity of bulk materials is a critical factor in the quality of the endproduct. Regardless of whether the focus is on minimizing productdegeneration, cleaning products perfectly or determining the residual dustto comply with standards – Enge Plas´ solutions offer the optimal mix ofmany years of process competence and globally leading bulk materialsexpertise. Even at the design stage of the conveying plant, we ensure thatdust generation will be minimized. For that reason, they select suitablepipe materials and flange connections and ensure conveying velocities tobe in an acceptable range.
The use of hydraulic conveying systems is providing best results tomeet the highest quality requirements. We have a range of equipmentwhich includes sieves and separators for efficient cleaning of the productfrom dust and streamers.
Diverting Counter-flow Elutriator
Proven its efficiency over the years and has been continuously optimized.Latest generation now provides two cleaning stages. With this theseparating efficiency is further improved. Highly-efficient diverting counter-flow elutriator is suitable for most pellets,has been optimized in terms of output and gas consumption and can befed directly either pneumatically or gravimetrically from a hopper.Throughput capacities of 120 t / h and more can be achieved.
Gravity Rotation Separator
Offers capacities of up to 100 t / h and is well suitable for separation ofdust and streamers of very soft and brittle granular products. Depending on type, this dust collecting takes place in 1 or 3 cleaningstages. Can be installed on the base, on the silo top or – depending on theavailable space – even between the silo and the tank car. It can also be
41 of 55
supplied as a compact, transportable unit.
Drum Sieve
Also fed gravimetrically. Used both to separate streamers and streamer conglomerates. Used as a standalone or as part of a cleaning system, the drum sieve is acompact, service friendly unit with fully automatic cleaning of the sieves.
Laboratory analyzing device to determine dust content
Used to determine the dust content in plastic pellets in accordance withthe FEM 2482 standard. Easy to operate, and in its compact desktop configuration it savesvaluable working time because it requires minimal time to set up.
Find out More
Contact us to learn more about Dust Collectors @[email protected]
Gate Valve
Description
Ideal for handling dry bulk material in gravity flow, dilute phase ordense phase pneumatic conveying applications. Enge Plas’ range of gatevalves are designed and engineered with two main principals in mind:
extend the service life of the valve andperform maintenance without taking the valve out of line
Our valves serve many industries including chemical, cement, coal,food, frac sand, grain, minerals, petrochemical, pharmaceutical, plastics,polymer, rubber and mining.
Key Benefit:
Unlike common knife gates and butterfly valves, our gate valves arespecifically engineered to handle dry bulk powders, pellets, and granules.Knife gates rely on soft elastomeric seals which erode or tear away inservice. Butterfly valves incorporate discs that cause significant flow restrictions,thus impacting system performance and throughput.Both designs promote wedging and packing of materials, preventingpositive air and material shut off. Our gate valves eliminate design flaws associated with knife gates andbutterfly valves.
Typical Key Features:
Serviceable while in-lineWear compensating hard polymer sealsNo pinch points or exposed moving parts for safe operationOpen / closed or volume metering of materialAccurate metering of materials with optional metering controlsHorizontal or vertical valve orientation
Diverse Range:
Orifice GateHandles dry bulk solids in gravity flow, dilute phase, or vacuum conveying
42 of 55
systems with pressures up to 1 barMechanically self cleans on opening strokeSeals protected from material flow streamRoller GateBest choice for handling dry material in gravity flow or low-pressureapplicationsPositive seal of dust and fine powdersHDPV2 GateAddress higher-pressure applications up to 5 barSeals fine material in higher aeration or pressure applicationsPatented rising blade action ensures optimal sealSeals protected from blast abrasionDoes not pack material upon closureTSG GateFor the most demanding applications when handling heavy-duty abrasivematerials such as sand, gravel, coal, and whole grains in gravity flowapplications where positive material shut-off and dust tight sealing isrequiredTitan Pressure Gate ValveAddress higher-pressure applications up to 6.8 bar and highertemperatures up to 350°C, for highly abrasive applications and requiresminimal maintenance over the life of the valveMounting boss for the addition of an optional proximity switchClear Action GateFor use in gravity flow or pneumatic conveying systems up to 1 barSelf-cleaning action on closure minimizes material build-upPositive seal across the valve and to atmosphereNo internal cavities for material to build upAggregate GateFor demanding applications handling material such as sand, gravel, wholegrains, and coalNarrow profile, choice of actuators, and custom rectangular sizes makethis slide gate adaptable to most existing installationReplaceable abrasion resistant liners deflect material away from supportrollersHardened steel rollers with grease fittingsMaterial displacement pocket minimizes wedging of material as bladeclosesRounded Blade GateFor the most demanding applications when handling heavy-duty abrasivematerials in gravity flow where positive material shut-off and dust-tightsealing is requiredDesign allows for rapid actuation to quickly start and stop material flowand makes it a good choice for applications that require meteringMaintenance GateDesigned to shut off material from a hopper or silo when maintenance ofdownstream equipment is requiredIn open position, it positively seals conveying air and material toatmosphereHand crank gearing is designed to close through material in case of anupset conditionHand Slide Orifice GateTo handle dry bulk solids in gravity flow conveyingFull flow orifice provides unrestricted conveying of material with no disk orledges to impede flow or cause material bridgingQuick Clean Orifice Gate“Clean out of place” gate valve designed for frequent cleaningFeatures a full-port opening and self-cleaning designCan be disassembled and assembled in minutes without toolsCarries a USDA Dairy Standard Accepted rating and is an excellentchoice for sanitary applications
Typical Range of Options:
Material construction options availableStandard or custom sizes
Find out More
43 of 55
Contact us to learn more about Gate Valves @ [email protected]
Conair
Description
Conair is the leading producer of auxiliary equipment for plasticsprocessing in the world. They make and market over 450 differentproducts, including resin-drying systems, blenders, feeders and material-conveying systems, temperature-control equipment and granulators.Extrusion solutions include gravimetric control systems, film and sheetscrap-reclaim systems and downstream equipment for pipe and profileextrusion. Conair is also a leader in plastics process integration,engineering and installing complete manufacturing systems that helpplastics processors manage their valuable raw materials, handle theircritical manufactured parts, and improve their process yield.
All Processes. All Markets. All Around the World.
Conair is able to offer concrete solutions across the entire spectrum ofauxiliary equipment and plastics processes. Whether you are an injectionmolder, an extruder, blow molder, thermoformer, rotomolder orcompounder, Conair has auxiliary equipment solutions for you. If youconsider yourself part of an end-market such as packaging, medical,transportation, building and construction, or any other, Conair hasspecialized expertise to help you. No matter whether you are located inIndiana or India, Frankfurt, Germany, or Frankfurt, Kentucky, Guaymas,Mexico, or Guangzhou, China, or even all of those places, Conair is thereto serve you.
Understanding the industries and customers you serve and theregional markets you compete in, Conair can anticipate your needs. Theycan provide you with not only products that do what they were designed todo, but also knowledge and technology that that makes you better at yourbusiness. As one of the world’s largest suppliers of auxiliary equipmentConair has unique access to plastics plants across the globe. Conair’speople are in those plants every day helping to solve problems, saveenergy, cut waste and generally do more with less.
Blending
Gravimetric Blenders – Standard and High Heat modelsThroughput ApplicationsGravimetric FeedersVolumetric Feeders
Conveying
Self-Contained Vacuum LoadersCompressed Air Material LoadersCentral Vacuum ReceiversConveying System ControlsVacuum PumpsMaterial Distribution SystemsMaterial Line Valves
Drying
Electric Dryers – Central and MobileGas-fired DryersCompressed Air DryersHot Air DryersDrying Hoppers
44 of 55
ResinWorks – Central Drying SystemCrystallizerDrying MonitorEnergySmart™ PET Drying System
Granulation
Beside-the-Machine GranulatorsCentral GranulatorsShreddersConveyorsEvacuation SystemsElutriation SystemsFines Separation EquipmentBlower PackagesNegative Pressure System
Heat Transfer
Thermolator Temperature Control UnitsPortable ChillersCooling TowersCentral ChillersPump TanksStrainers and FiltersTower Heat Exchanger
Find out More
Contact us to learn more about Conair @ [email protected] Conair @ conairgroup.com
EAS
Description
Actively involved in the day-to-day running of the EAS business,advising clients and providing value-added solutions, founders HarmNijzink, Hero Marggrander and Cliff Drake were also responsible for thedevelopment of key processes and inventions that help companiesimplement time- and cost saving mold and die change solutions.Innovative products involving single-minute exchange of die (SMED)applications on a worldwide scale. In the fall of 2015, the EAS ‘foundingfathers’, after years of working together with the new generation, decidedto hand over their corporate responsibilities.
Since 1985, EAS change systems plays a worldwide leading role incost reduction with factory automation solutions.
EAS is the originator of QMC applications in Europe. From 1985onwards, EAS has been at the forefront of all developments for SMEDapplications in the plastics industry. EAS was the first on the Europeanmarket to design and sell hydraulic clamping for injection moldingmachines. EAS initiated the application of automatic multi-couplers on thismarket and introduced the first applications of magnetic clamping forinjection molding. Then they pioneered the use of mold change cars andtables for the European market.
Simultaneously, by combining expertise in all these disciplines EAS isable to offer integrated solutions. And to this day, they continue to providecustomers with the best solutions, integrating extended knowledge intolarge turnkey projects around the globe.
45 of 55
Mould Handling Systems
QMC - Quick mould change clamping systems for the plastic mouldingindustry: reducing downtime, increasing equipment productivity
Adaptive manually operated clamping systemsAdaptive hydraulic mould clamping systems (vertical)Adaptive hydraulic mould clamping systems (horizontal)Integrated hydraulic mould clamping systems EAS EngelPressmag electro permanent magnetic clamping systemsRetrofit packagesVertical presses and QMC systems
QMC - Quick mould change handling systems for the mouldingindustry: speeding up the mould change process, reducing machinedowntime
Manual mould handling systemsBattery driven mould change cartsMould change tablesProduction cellsRail guided mould change cartsAir floating mould cartsCustomized solutionsPre-heating station
Mono, manual and automatic multi couplers for factory automationapplications: lowering inventory expenses, reducing manufacturing costs
Manual multi couplersAutomatic multi couplersMono couplers
Service units and storage systems for injection moulding plantautomation applications: rationalizing mould maintenance operations,eliminating slow and hazardous equipment handling methods
Inspection unitsDie turning unitsDie splittersStorage rack systems for moulds & dies
Ejector systems for mould change applications: eliminating timeconsuming manual ejector connections, increasing machine availability
Ejector couplers
Find out More
Contact us to learn more about EAS @ [email protected] EAS @ easchangesystems.com/uk
Lab Equipment
Description
Enge Plas provides a wide range of laboratory equipment.
Jolting Volumeter
Range of ApplicationFor determining apparent volumes before and after settling, the ability tosettle as well as the tapped density according to the EuropeanPharmacopoeia, DIN ISO 787 Part 11, ISO 3953 and ASTM B 527-93.Possibility of using measuring cylinders of 10, 25, 50, 100, 250, 500 und1000 ml opens a wide range of industrial applications for this kind ofequipment.
46 of 55
Investigation of powdery, fibrous and granular products can be performed.Featuresin modern soft designeasy handlingcontrol unit for simplified operationpossibility of using different measuring cylinderssimple exchange of the measuring cylinderseasy cleaning
Laboratory Drum Hoop Mixer
Range of ApplicationUsed for mixing powdery to granular products. Also applicable for dyeing plastics, for mixing solid and liquid media and/orsimilar duties.Featuresin modern soft designeasy handlingcontrol unit for simplified operationpossibility of using different mixing cylinderssimple exchange of the mixing cylinderseasy cleaning
Test Screening Machine
Range of ApplicationServes to analyse dry powdery to coarse grained materials. By using sieves with different mesh openings respectively perforations,the material sample is almost tolerance-free classified into its graincomposition. Achieved reproducible values provide information making it possible todraw conclusions for milling, grinding and other processes.Featureseasy handlingspeed and stroke optimized based on decades of experiencewide range of test sievessimple exchange of the test sieveseasy cleaning
Automatic Pigment Muller
Range of ApplicationUsed for grinding pasty pigments in laboratories. Purpose of this process is to determine the consistency and density orcolouring power of pigments. Test series can be carried out with product quantities of 3 to 7 g. Also possible to test similar products under identical conditions.Featuresmaintenance-freeeasy to cleaneasy handling
Find out More
Contact us to learn more about Lab Equipment @[email protected]
Mould Changing System
Description
Whether you opt for a rail guided wagon or a freely movable solutionlike our battery driven carts or air floating mould change cars, every
47 of 55
situation can be met with a customized solution:
Single or doubleThe single mould change table holds one mould and can be used on onemachine only, or alternate between two machines. A double mouldchange table can save valuable space by holding two moulds.Operating platformConvenient to reach the operating system on that side, if there’s need formaintenance, or when heating the moulds manually.Stationary, on rails or free-movingLined up machines make the ideal setup for a mould change system onrails. This enables fully automated loading and unloading of the machines.The rail-based system can be setup to carry one or two moulds.
Features
SafeDurableService-friendlyModularStraightforward installation
Complete solutions from one source
We offer a modular design, leaving you maximum freedom. Optimizeyour system step-by-step with our smart and cost effective solutions.
Driven roller or push/pullDepending on the size of your moulds and the number of machines, youcan opt for to more automation in loading precision. Have your mouldsloaded and positioned fast, precise and secure using an overhead or atelescopic push/pull system, which is even faster. Most efficient loading isdone by driven rollers.Preheating and coolingWarming up the moulds outside the machine safes a lot of downtime. Apreheated mould is instantly ready for production, thus giving you higherproduction rates. Preheating and cooling can either be integrated in themould change system, or in separate storageStorageKeep your moulds safe and organized in storage racks, saving room inyour production area with modular storage systems ranging from a singleentry to a fully automated solution.Mould codingWhether it’s for identification purposes, or expanded control by readingmould data, mould coding can be integrated in the system. Safeguardingall steps in the process, helping you stay ahead.
Find out More
Contact us to learn more about Mould Changing Systems @[email protected]
Purging Agent
Description
Enge Plas supplies a mechanical purging agent that enables the safe,effective and efficient cleaning of plastics processing equipment.
Metal surfaces are cleaned using a unique scrubbing effect. The materialis not abrasive to screw, barrel, die etc.Particularly useful when changing colour, polymer, or when screw andbarrel are carbonized. Enables rapid purging of the previous colour and/orpolymer, so that machine downtime and loss of expensive polymer isminimized.
48 of 55
Suitable for injection moulding, extrusion and blow moulding processes.Cost effective, as only a small amount is required, usually at 20% addrate to the polymer.
How it works
This granular material is blended in with a small amount of the polymerthat you are using and fed into a starved screw/barrel. The blendedmaterial is processed through your equipment at similar temperatures andrevs to typical run conditions for the carrier polymer. The material softensslightly, but does not melt, and thoroughly loosens carbonized anddegraded resin, allowing the polymer to flush out the system.
This makes it particularly useful for:
Cleaning colour from your equipmentCleaning polymer from your equipmentRemoving carbon build-up and black specksRegular preventative maintenanceBefore manual cleaning
Various grades
For injection moulding (except where openings are less than 1.5mm)For extrusion, blow moulding, and injection moulding with openings lessthan 1.5mmFor hot runner systems with a minimum clearance of 0.75mmUsed in unblended form (i.e. at 100%) in extrusion and compoundingprocesses. Provides a gentle scrubbing effect to the screw and barrel andremoves build up of carbonised material. It softens but does not melt,therefore it provides a scrubbing effect – it does not scratch or wear thescrew or barrel.
Find out More
Contact us to learn more about Purging Agents @[email protected]
Vortex
Description
Vortex® is considered the world leader in valves for handling dry bulksolids. Sitting on a 15-acre campus in Salina, KS, our state-of-the-artmanufacturing facility and office complex spans over 150,000 square feet.Their current footprint allows them to introduce lean manufacturingmethods supported by advanced fabrication equipment and laser cuttingtechnology.
As Vortex began to expand and modernize, they were also stretchingfootprint into new global markets. They have sold valve solutions in over75 countries worldwide with local representatives in 30-plus countries.Along with their corporate headquarters located in Salina, KS, they haveglobal offices in the United Kingdom, Switzerland, Latin America, andAsia.
It all began in the 1980s when the company was awarded a patent onthe Orifice Gate™. This new and innovative valve design surpassed theindustry’s expectations for handling dry materials in pneumatic conveying.Soon following the Orifice Gate came the launch of the Wye LineDiverter™. This diverter valve applied the same design concepts of theOrifice Gate dramatically improving process efficiencies when comparedto traditional flapper or tunnel style diverters.
49 of 55
QUANTUM® Series
Vortex Quantum Series slide gates and diverters are the valves ourcustomers have been using for decades to shut off, meter, and divert theirdry bulk material. It’s our traditional line of valves for dry bulk processingand conveying through gravity flow or pneumatic (pressure or vacuum)conveying.Some of the industries that use Quantum valves include but not limited to:agriculture, chemical, coffee, dairy, foods, milling, pet food, petrochemical,pharmaceutical, plastics, rubber, textiles, tobacco, and wood – to name afew.
TITAN Series
Vortex Titan Series slide gates and diverters are engineered for HEAVY-DUTY material handling applications. These applications includematerials that pose excessive abrasion or wear issues, situations that callfor extremely large-sized valves and diverters, and conditions that warrantadditional considerations that will allow these valves to be as successfulas possible in extremely harsh environments.Some of the materials handled with Vortex Titan valves include but notlimited to: alumina, bauxite, cement, clinker, coal, fly ash, frac sand,gravel, glass cullet, lime/limestone, metal powders, potash, rock and sand– to name a few.
LOADING SOLUTIONS
Loading Solutions offer a complete line of telescopic loading chutesystems for the loading process. We also custom engineer any loadingspout system to meet the most demanding loadout applicationrequirements, including corrosive or hazardous materials, long distances,low and high temperatures, etc. Vortex fully assembles, factory tests andpackages every loading spout system before shipping it to the facility toprovide ease of installation and to ensure optimal performance once inuse.Some of the materials handled with Vortex Loading Solutions include butnot limited to: petrochemical powders, plastic granules, wood pellets,cement, grains, sand, gravel, or coal. – to name a few. And can be usedin open, semi-enclosed and closed vessels: trucks, railroad cars, tankers,ships, barges, and open-stockpiling.
Engineered Solutions
Engineered Solutions for handling dry bulk material have always been apart of Vortex. Our application engineers listen to the customer’s needsand match the right valve to the application parameters. Materialcharacteristics, environment, and valve requirements all must beconsidered to properly modify the valve to fit the application.Because the combinations are nearly endless, a commodity valve or offthe shelf valve will not be enough. Vortex offers literally millions ofvariations of slide gates and diverter valves to meet almost any dry bulkprocessing application. We can sometimes take one of our standardvalves and make some minor modifications to fit the customer’sapplication. Other times the only thing left standard on the valve is thefamous black and silver Vortex sticker.
Find out More
Contact us to learn more about Vortex @ [email protected] Vortex @ www.vortexvalves.com
50 of 55
Coperion
Description
About Coperion
Coperion is the worldwide market and technology leader incompounding & extrusion, materials handling and service - as well asbeing a partner for global corporations and small to medium-sizedenterprises in the plastics, chemicals, food and aluminium industries.
As an integrated technology provider, Coperion uses theircomprehensive system and process expertise to implement individualsolutions for compounding technology and bulk materials handling fortheir customers. This covers the full added value chain of the productionprocess from consultation and planning, through engineering, processoptimization, manufacturing, delivery, installation and commissioningthrough their worldwide service network. Coperion collaborates withcustomers on innovative, new, and further developed components,machines and systems, forming the basis for long-lasting, successfulpartnerships where the focus is on the benefit for the customer togetherwith efficiency, reliability, and quality. That's what Coperion means whenthey say "confidence through partnership".
Compounding & Extrusion
With Coperion you have the partner at your side who can offer you thebest solution for all your compounding tasks. This begins with specialapplications on a laboratory scale and extends right through to industrialproduction plants. As a pioneer in the development of the closelyintermeshing, co-rotating twin screw extruder, we possess a unique know-how and an extraordinary wealth of experience in this field.
Coperion has continuously set new standards in machine and systemdesign for processing technology since the 1950s. More than 12,000installed compounding systems worldwide are proof of our unique systemand process competence. And despite all our engineering skills we neverforgot one important thing: We listen closely to what our partners say!That’s what we mean when we say “confidence through partnership”.
TechnologyMore than 130 years of experience with mixing and kneading processesPioneer work and continuous further development of the closelyintermeshing, co-rotating twin screw extruderMore than 12,000 installed compounding systems worldwideComplete product portfolio: from the ZSK 18 MEGAlab laboratorymachine to the ZSK 380 MEGAcompounder high-capacity extruderThroughput rates of 1 kg/h to 100 t/hComplete systems from raw material feeding to the whole downstreamequipment
Research & DevelopmentMost comprehensive Test Labs in the industry in Stuttgart (D), Ramsey(USA) and Nanjing (CN)Thirty compounding plants worldwide continuously available for testsExperience from 5,000 compounding tests and 40,000 product analysesin our own laboratoriesMore than 75 % of all plastic compounds worldwide were tested in theCoperion Test LabsMore than 950 patents and pending patents since 1980
Materials Handling
We prove our skill and competence at all bulk materials handling andprocessing stages. No matter whether we convey, separate, store, doseor thermally treat your product - quality is our benchmark.
As the world market and technology leader in the bulk materials
51 of 55
components and systems sector, we have installed more than 8,000plants, the success of which clearly underlines our unique system andprocess competence.
8.000 bulk materials systems installed9.000 bulk materials components produced each yearWorkforce of 700Network with companies in Weingarten (D), Offenbach (D), Ferrara (I),New Delhi (IND), Singapore (SGP), Shanghai (CN), Ramsey (USA) andHouston (USA)Technical center in Weingarten (D)
Services
Service means more to us than someone stopping by to repairequipment. Our service structure offers much more than that. It consists ofmore than 220 service engineers and technicians around the globe whonot only look after your machines and systems but also after yourbusiness. They see themselves as partners who secure your future.
Find out More
Contact us to learn more about Coperion @ [email protected] Coperion @ www.coperion.com/en
Bunting
Description
Bunting has always been about solving problems with magnetic energyfor manufacturers for several industries. The company, headquartered inNewton, Kansas, has multiple locations including Magnet MaterialsDivision in Elk Grove Village, Illinois; Bunting Magnetics Europe Ltd.manufacturing operation in Berkhamsted, England, Magnet Applications,Inc. facility in Dubois, Pennsylvania, purchasing office for Bunting Chinalocated in Ningbo, China and official licensee in Boronia Victoria,Australia, Alpha Magnetics Pty Ltd.
In 1979, Bunting moved their manufacturing operations from Chicago,Illinois, to Newton, Kansas. Here, they design and manufacture magneticseparation, metal detection and material handling equipment as well as acomplete line of printing cylinders. With a team of engineers using worldclass design equipment, Bunting can customize a product to fit anyapplication or production line.
The Newton facility is where design and manufacturing engineers workwith the latest computer-aided design equipment to develop new productsand to adapt existing products for special applications.
Bunting is constantly seeking new ways magnetic products canprovide the industries served with more efficient production, safer productand an untarnished reputation.
Their first 50 years have been a profile in growth and innovation. Nowand in the future, Bunting is striving to keep improving and build upon thelegacy.
Range of Magnetic Separation
FF Drawer HF Drawer MagnetsPlate MagnetsMagnetic Liquid TrapsDrum MagnetHump MagnetsIn-Line Magnets
52 of 55
Magnetic Cartridges & Grate MagnetsTurboGrate™ Magnetic SeparatorWedge MagnetsTorpedo MagnetsCleaning Systems
Find out More
Contact us to learn more about Bunting @ [email protected] Bunting @ https://buntingmagnetics.com
Rapid
Description
When Rapid first got in to the granulator business, the originalemployees exhibited a spirit and a resolve to better understand customerneeds and to make a better granulator. A granulator that produced betterquality regrind that utilized less energy and provided more efficient cuttingthan anything else in the market. Today Rapid still resolves to do all thosethings. And, they resolve to do them better and better each and every yearwith the help of the best employees and distribution force in the business.
Granulator Solutions for Every Type of Production
The extensive range of granulators produces high-quality regrind froma wide assortment of plastic waste resulting from various processes.Rapid solves the problems associated with plastic recycling by matchingthe right technology with specific applications.
Rapid granulator families – small, medium, large and heavy-duty –cover regrind throughputs from a few kilos per hour up to several tonesper hour. By examining plastic products and the amounts involved, Rapidcan help you select the granulator and handling accessories best suited toyour particular needs.
Open-Hearted Concept
With the invention of the Open-Hearted granulator design, Rapid set anew standard in granulator technology. The possibility to open up thecutter house completely provides unmatched access to core machineparts.
The benefits are obvious:
Full control when cleaning providing “visibly clean” inspection.Fast and easy access for service and maintenance making for exampleknife changes much faster.
All Rapid granulators provide:
Constant Cutting Circle, CCCScissors cut, providing clean, high quality regrindLow energy consumption.
Find out More
Contact us to learn more about Rapid @ [email protected] Rapid @ www.rapidgranulator.com
Schrage
53 of 55
Description
Schrage Conveying Systems is your specialist for tube chainconveyors – worldwide.
For more than two decades, they have been planning andimplementing conveyor systems for various bulk solids and manyindustries – individually suited to your needs. Their tube chain conveyoralso reliably transports your bulk material from A to B.
There is only one thing on everyone's mind: how to go up in the world.We are slightly different in that we can also go sideways and diagonally. Itis all very simple: you need to convey bulk materials from A to B andSchrage has the corresponding tube chain conveyor technology for thatpurpose.
As a complete conveyor system, it is modular with a flexible layout fora large variety of industries and bulk materials, along with interestingadditional components to meet different desires. This is all planned byhighly specialized staff members who all have a passion for the newchallenges that the handling of bulk materials poses. And the in-housetest conveyor is looking forward to receiving your samples.
Schrage’s philosophy is equally straightforward. If you tell them whatbulk material you would like to convey, they will provide the appropriatesolution. For more than 20 years, Schrage, a family business, has beenusing its expertise, experience, and curiosity to deliver solutions to wherethey are needed – directly to you.
Tube Chain Conveyor: One System – Endless Combinations
The idea is simple. Schrage plans your conveyor according to amodular principle. Moreover, your system can be tailored made, materialproperties, and speed to correspond perfectly with your bulk material.
That is why they can offer you the ideal bulk handling system – theirchain conveyor in five different sizes, along with many fascinating andself-developed additional components: Brush or knocking units forcleaning the chains and for discharging, special slider and flap systems foran optimum residual discharge in the discharge unit. Or how about a tubechain conveyor as a heat exchanger?
Horizontal, Vertical or Upright: Tube Chain
Conveyors are real Quick-change ArtistsYou can take Schrage’s motto “We Convey Solutions” quite literally.Because the Schrage tube chain conveyers are so flexible that they canbe employed in a nearly infinite number of variations.
Due to their compact dimensions, low maintenance, ease of use, andastonishingly low energy consumption, the Schrage chain conveyers haverightfully become extremely popular. And we would be pleased to help youchoose your ideal variation.
Find out More
Contact us to learn more about Schrage @ [email protected] Schrage @ www.schrage.de/nc/en/homepage.html
Tel 06-679 1111Fax 06-679 8899E-Mail [email protected]
Enge Plas Automation Sdn. Bhd.
Lot 12694, Jalan TJ 2/3, Tuanku Ja'afar Industrial Park, Sungai Gadut, 71450,Seremban, Negeri Sembilan, Malaysia
Address51 Ubi Avenue 1, #01-19, Paya Ubi Industrial Park,
Singapore 408933.Tel +65 6343 1911Fax +65 6343 1123Email [email protected]
54 of 55
55 of 55
