Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
INDOOR CABLES
Indoor Cables 1
INTRODUCTION
Building Wires are used for fixed indoor installations inside conduits and within walls. Building Wires with multi-cores can be used to connect a power supply to large loads such as air conditioning systems. Examples include: copper conductors with PVC insulation (NYA) and copper with PVC insulation and nylon jacketing (THHN).
In this catalogue, we cover all technical aspects of Energya Cables-SA Indoor Cables. We included design considerations such as type of insulation material, insulation thicknesses, sheath material, and sheath thicknesses. Cables electrical parameters such as conductor DC resistance and current ratings are included as well.
Energya Cables-SA Indoor Cables are manufactured based on international standards such as IEC 60227, BS 6004, and UL 83. We are also capable of manufacturing according to client requirements and needs.
Indoor Cables2
GENERAL INFORMATION
Standards
The indoor cables described in this catalogue are all standard types, and their performances has been proved in operation.
Construction and tests are in accordance with the recommendation of IEC publications where applicable.
Control cables in accordance to other standards (e.g. BS, VDE, NEMA) can be manufactured upon customer’s request.
Variation in Production and Delivery Options
– The provided data is approximate and subject to manufacturing tolerance.– Delivery length tolerance is ± 5%– Other product sizes are available upon customer’s request.
Jacket Marking
Standard embossed outer jacket marking consisting of:1 – Name of manufacturer.2 – Type designation, size of conductor, rated voltage and standard.3 – Continuous length marking every meter.4 – Year of manufacture.
PVC Insulation
PVC Insulation
Indoor Cables 3
LAYING INFORMATION
Minimum Bending Radius During Installation
During laying, the bending radius should not be smaller than values given below.The radius depends on the outer diameter (Do) of the cable.
Cable for Fixed Wiring
ELECTRICAL PARAMETERS OF THE CABLES
DC Resistance of Conductor
The Maximum DC resistance values of conductors at 20ºC are as per “IEC 60228” standard.DC resistance per unit length of the conductor at other conductor temperature is given by: R = Ro [ 1 + α20ºC (t – 20ºC)]Where :R = DC resistance at temperature t ºCΩ/kmRo = DC resistance at temperature 20ºC Ω/km (given in the relative tables for each type of cable)t = Conductor temperature ºCα20ºC = Temperature coefficient at 20ºC 1/ºCFor copper conductor α20ºC = 0.00393
Indoor Cables4
Type
Sure Wire (NYA): CU / PVC
Standartd : IEC 60227 and BS 6004Nominal Voltage : 450/750 volt , 300/500 voltConductor : Soft annealed solid or stranded copper wiresInsulation : PVC compound rated 85ºC (or LSHF)Packing : Plastic spools-coils, shrink wrap as per customer requirement
P.S. Conductors based on other standards are available upon request.
Applications: For indoor fixed installations in dry location.
TECHNICAL INFORMATION
0.5
0.75
1
0.6
0.6
0.6
2
2.17
2.32
9
12
14
36
24.5
18.1
8
11
14
11
17
22
Conductor
PVC Insulation
Indoor Cables 5
Type
Easy Pull (THHN): CU / PVC / NYLON
Standartd : UL-83 & UL-1063 & UL-758Nominal Voltage : 600 voltConductor : Soft annealed copper wiresInsulation : PVC compound rated 105ºCJacketing : : NYLONPacking : Plastic spools in box or as per customer requirements
P.S. Conductors based on other standards are available upon request.
Applications: For indoor fixed installations in dry location.
TECHNICAL INFORMATION
*
*
*
*
AWG
SizeMetric
Equivalent
NominalInsulationThickness
MinimumNylon
Thickness
OverallDiameter(Approx.)
CableWeight
(Approx.)Numberof wires
Wirediameter
Outerdiameter
Conductor
mm2 mm mm mm mm mm Kg / Km Ohm / Km18
16
14
12
10
8
0.823
1.31
2.08
3.31
5.26
8.37
19
19
19
19
19
19
0.24
0.3
0.4 & 0.3
0.5 & 0.4
0.6 & 0.5
0.8 & 0.6
1.2
1.5
1.8
2.29
2.87
3.63
0.38
0.38
0.38
0.38
0.51
0.76
0.1
0.1
0.1
0.1
0.1
0.13
2.16
2.46
2.76
3.25
4.09
5.41
12
18
24
37
58
95
21.8
13.7
8.62
5.34
3.41
2.14
* 19 wire combination = 13 large wire diameter + 6 small wire diameter
Max DCResistance
at 20 C0
Indoor Cables6
Flex Wire (Flexible )
Type : CU / PVCStandartd : IEC 60227 & BS 6004Nominal Voltage : 300/500 & 450/750 voltConductor : Soft annealed copper fine wiresInsulation : PVC compound rated 85ºC (or LSHF)Packing : Plastic spools-coils ,Shrink wrap or as per customer requirements
TECHNICAL INFORMATION
P.S. Conductors based on other standards are available upon request.
Applications: For indoor fixed installations where particular flexibility is required.
Indoor Cables 7
Multi Wire ( NYY )
Type : CU / PVC / PVCStandartd : IEC 60227 Nominal Voltage : 300/500 VoltConductor : Soft annealed copper fine wiresInsulation : PVC compound rated 70ºC or 85ºCJacketing : PVC compound (or LSHF)Packing : Plastic spools-coils or shrink wrap as per customer requirements
TECHNICAL INFORMATION
P.S. Conductors based on other standards are available upon request.
Applications: For indoor movable installations in dry location.
Indoor Cables8
Flat Wires (Flat )
Type : CU / PVC / PVCStandartd : BS 6004Nominal Voltage : 300/500 voltConductor : Soft annealed solid or stranded copper wiresInsulation : PVC compound rated 70ºC or 85ºCJacketing : PVC compound(or LSHF)Packing : Plastic spools-coils or shrink wraps as per customer requirements
TECHNICAL INFORMATION
Conductors based on other standards are available upon request.
Applications: For indoor fixed installations in dry location.
For indore fixed instalation in dry location
12.1
7.41
4.61
3.08
1.83
1.15
12.1
7.41
4.61
3.08
1.83
1.15
18.2
18.2
12.1
7.41
4.61
3.08
18.2
18.2
12.1
7.41
4.61
3.08
12.1
7.41
4.61
3.08
1.83
1.15
12.1
7.41
4.61
3.08
1.83
1.15
WEIGHT – ImperialOunces ........................................... 28.3495 gramsPounds (Av) ................................... 453.59 gramsPounds (Av) ................................... 0.45359 kilogramsTons (short) ................................... 907.19 kilogramsTons (long) ..................................... 1016.05 kilograms
WEIGHT – MetricGrams ............................................ 0.03527 ouncesGrams ............................................ 0.002205 poundsKilograms ...................................... 35.274 ouncesKilograms ...................................... 2.2046 poundsKilograms ...................................... 0.001102 tons (short)Kilograms ..................................... 0.0009842 tons (long)
MISCELLANEOUS – ImperialPounds per 1000 feet ............... 1.48816 kilograms per kilometerPounds per mile .......................... 0.28185 kilograms per kilometerPounds per square inch ............ 0.0007031 kilograms per square millimeterPounds per square inch ............ 0.07031 kilograms per square centimeterFeet per second .......................... 18.288 meters per minuteFeet per second .......................... 1.09728 kilometers per hourMils per hour ................................ 1.60935 kilometers per hourOhms per 1000 feet .................. 3.28083 ohms per kilometerOhms per mile ............................. 0.62137 ohms per kilometerDecibels per 1000 feet ............. 3.28083 decibels per kilometerDecibels per mile ........................ 0.62137 decibels per kilometerDecibles ........................................ 0.1153 nepers
MISCELLANEOUS – MetricKilograms per kilometer ............ 0.67197 pounds per 1000 feetKilograms per kilometer ............ 3.54795 pounds per mileKilograms per square millimeter 1422.34 pounds per square inchKilograms per square centimeter 14.2234 pounds per square inchGrams per cubic centimeter .... 0.03613 pounds per cubic inchMeters per minute ...................... 0.05468 feet per secondKilometer per hour ..................... 0.91134 feet per secondKilometer per hour ..................... 0.62137 miles per hourOhms per kilometer ................... 0.3048 ohms per 1000 feetOhms per kilometer ................... 1.6093 ohms per mileDecibels per kilometer .............. 0.3048 decibels per 1000 feetDecibels per kilometer .............. 1.6093 decibels per mile
TEMPERATUREºFahrenheit ................................... 5/9 (ºF)-32 ºCelsiusºCelsius .................................... 9/5 (ºC) + 32 ºFahrenheit
LENGTH - ImperialMils ............................................... 0.001 inchesMils ............................................... 0.0254 millimetersInches .......................................... 1000 milsInches .......................................... 25.40 millimetersInches .......................................... 2.54 centimetersFeet .............................................. 30.48 centimetersFeet .............................................. 0.3048 metersFeet (thousands of) .................. 0.3048 kilometersYards ............................................ 0.9144 metersMils ............................................... 1.6093 kilometers
LENGTH – ImperialMillimeters .................................. 39.37 milsMillimeters ................................. 0.03937 inchesCentimeters .............................. 0.3937 inchesCentimeters ........................... 0.032808 feetMeters ........................................ 39.37 inchesMeters ........................................ 3.2808 feetMeters ........................................ 1.0936 yardsKilometers ................................. 3280.83 feetKilometers ................................. 0.62137 mils
AREA – ImperialSquare mils ............................... 1.2732 circular millsSquare mils ............................ 0.000001 square inchesCircular mils ........................... 0.7854 square milsCircular mils ................. 0.0000007854 square inchesCircular mils ...................... 0.00050657 square millimetersSquare inches ......................... 1000000 square milsSquare inches ......................... 1273240 circular milsSquare inches ......................... 645.16 square millimetersSquare inches ......................... 6.4516 square centimetersSquare inches ......................... 0.09290 square metersSquare inches ......................... 0.8361 square meters
AREA – MetricSquare millimeters ................. 1973.52 circular millsSquare millimeters ................. 0.00155 square inchesSquare centimeters ............... 0.155 square inchesSquare meters ........................ 10.7638 square feetSquare meters ........................ 1.19599 square yards
VOLUME - ImperialCubic inches .......................... 16.38716 cubic centimetersCubic feet ............................... 0.028317 cubic meters
VOLUME – U.S.Quarts (liquid) ............................ 0.9463 cubic centimetersGallaons ...................................... 3.7854 cubic meters
VOLUME – MetricCubic centimeters .................. 0.06102 cubic inchesCubic meters ........................... 35.3145 cubic feetLitres .......................................... 1.05668 quarts (Liquid U.S.)Litres .......................................... 0.26417 gallons (U.S.)
Multiply by to obtain
CONVERSION TABLE
Multiply by to obtain