Embed Size (px)
Citation preview
ENERGY EDUCATION CENTERSWorkforce Education & TrainingQ1 | 2020
Q1 | 2020 Workforce Education & Training Workforce Education & Training Q1 | 2020
INFORMATION
IRWINDALEContact us: 800-336-2822 [email protected]
Location: Energy Education Center – Irwindale 6090 N. Irwindale Ave. Irwindale, CA 91702
Register for classes at on.sce.com/workshops
TULAREContact us: 800-772-4822 [email protected]
Location: Energy Education Center – Tulare 4175 S. Laspina St. Tulare, CA 93274
Register for classes at on.sce.com/workshops
ON-LOCATIONSelect classes are available in a city or town near you.
ON-DEMANDTake a class any day or time, 365 days a year, 24/7.
Key� Basic Class ¿ Intermediate Class ¢ Advanced ClassAIA Class carries American Institute of Architects Learning UnitsFCSI Foodservice Consultants Society International Continuing Education UnitsIDSM This class is Integrated Demand Side Management compliant, and presents Energy
Efficiency,DemandResponseand/orDistributedGenerationandutility-specificprogramsin thecontextofeitherwhole-buildingsystemsorspecifictechnologies.
SWRCB ClasscarriesStateWaterResourcesControlBoardContactHours
2 3
Q1 | 2020 Workforce Education & Training Workforce Education & Training Q1 | 2020
IRWINDALETo enroll in a class visit us at on.sce.com/workshops
Commercial/IndustrialIntroduction to Programmable Logic Controllers: Energy Efficiency Applications � 2/24 8:30 AM – 4:00 PM
PLC LEVEL 1: Industrial Electricity and Automated Controls (2-Day Workshop) � 2/25-2/26 8:30 AM – 4:00 PM
PLC LEVEL 2: Industrial Electricity and Automated Controls (2-Day Workshop) � 2/27-2/28 8:30 AM – 4:00 PM
PLC LEVEL 3: Industrial Electricity and Automated Controls (2-Day Workshop) � 3/3-3/4 8:30 AM – 4:00 PM
PLC LEVEL 4: Industrial Electricity and Automated Controls (2-Day Workshop) � 3/5-3/6 8:30 AM – 4:00 PM
Energy Codes & StandardsIntroduction to CBECC-Res Energy Modeling Software for Residential Buildings � 3/3 8:30 AM – 4:00 PM
Title 24, Part 6 Essentials Nonresidential Lighting Standards: Comparing 2019 to 2016 Requirements ¿ 3/23 8:30 AM – 4:00 PM
2019 Non-Residential Standards for Architects ¿ 3/24 8:30 AM – 4:00 PM
Title 24, Part 6 Residential Lighting Standards: 2019 Energy Code Requirements � 3/25 8:30 AM – 12:30 PM
Beginning EnergyPro 8 Non-Residential � 3/26 8:30 AM – 12:00 PM
Beginning EnergyPro 8 Residential � 3/26 12:30 PM – 4:00 PM
Electrical TrainingGrounding for Performance and Safety ¢3/4 8:00 AM – 4:00 PM
Power Quality Fundamentals ¢3/26 8:00 AM – 4:00 PM
HVAC/RIHACI: CA 2019 Title 24 Module Part 1 ¿
1/8 6:00 PM – 9:00 PM
IHACI: CA 2019 Title 24 Module Part 2 ¿1/9 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Gas Heating Module Part 1- Practical Fundamentals and Theory of Gas Heating ¿ 1/22 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Gas Heating Module Part 2- Quality Installation, Maintenance, and Service of Gas Heating Systems ¿ 1/23 6:00 PM – 9:00 PM
Variable Refrigerant Flow and Ductless Systems - Design and Application � 1/24 8:30 AM – 12:30 PM Irvine City Hall
Residential and Light Commercial HVAC ¿ IDSM
1/28 8:30 AM – 4:00 PM
IHACI: 2020 NATE HVAC/R Support Module Part 1 �2/5 6:00 PM – 9:00 PM
IHACI: 2020 NATE HVAC/R Support Module Part 2 � IDSM
2/6 6:00 PM – 9:00 PM
IHACI: 2020 NATE HVAC/R Support Module Part 3 �2/12 6:00 PM – 9:00 PM
Basic Heating, Ventilating and Air Conditioning (HVAC) � IDSM 2/13 8:30 AM – 12:30 PM Irvine City Hall
IHACI: 2020 NATE HVAC/R Support Module Part 4 � 2/13 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 1 - Practical Fundamentals and Theory of HVAC/R Systems ¿ 3/4 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 2 - Essential HVAC/R System Motor Theory for the Field Technician ¿ 3/5 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 3 - Different Electrical Components Found in the HVAC/R Industry ¿ 3/11 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 4 - Electrical Schematics: A Roadmap to Diagnosing a HVAC/R System ¿ 3/12 6:00 PM – 9:00 PM
Basic Heating, Ventilating and Air Conditioning (HVAC) � IDSM 3/18 8:30 AM – 3:00 PM
LightingCalifornia Advanced Lighting Controls Training Program AT Technician: Lighting Acceptance Test Technician Certification Course - 2 Day Workshop ¿ 1/14-1/15 8:00 AM – 4:00 PM
Daylighting For Buildings � 1/28 8:30 AM – 12:30 PM
Outdoor Lighting with LEDs ¢ 1/29 8:30 AM – 4:30 PM
SustainabilityCALGreen Title 24 Part 11 ¿ 2/5 8:30 AM – 12:30 PM
Zero Net EnergyZero Net Energy Design Residential ¿ 2/4 8:30 AM – 12:30 PM
All-Electric Homes: Key Systems & Energy Modeling ¿ 3/5 8:30 AM – 12:30 PM
4 5
Q1 | 2020 Workforce Education & Training Workforce Education & Training Q1 | 2020
TULARETo enroll in a class visit us at on.sce.com/workshops
Commercial/IndustrialIntroduction to Programmable Logic Controllers: Energy Efficiency Applications � IDSM
3/23 8:30 AM – 4:00 PM
PLC LEVEL 1: Industrial Electricity and Automated Controls (3-Day Workshop) �3/24-3/26 5:30 PM – 9:30 PM
PLC LEVEL 2: Industrial Electricity and Automated Controls (3-Day Workshop) �3/31-4/2 5:30 PM – 9:30 PM
Energy Codes & StandardsTitle 24: Where We’re Headed with the 2019 Standards ¿ IDSM
3/31 8:30 AM – 12:00 PM
HVAC/RIHACI: (CAQI/QM/QS) Gas Heating Module Part 1 - Practical Fundamentals and Theory of Gas Heating � 1/15 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Gas Heating Module Part 2 - Quality Installation, Maintenance and Service of Gas Heating Systems ¿ 1/16 6:00 PM – 9:00 PM
IHACI: CA 2019 Title 24 Module Part 1 ¿
1/22 6:00 PM – 9:00 PM
IHACI: CA 2019 Title 24 Module Part 2 ¿1/23 6:00 PM – 9:00 PM
Hands-on HVAC Training and Evaluation for Mechanical Acceptance Testing Technicians (MATT): Day 1 MCH Forms 02a, 03, 05 ¿2/4 8:00 AM – 4:30 PM
Hands-on HVAC Training and Evaluation for Mechanical Acceptance Testing Technicians (MATT): Day 2 MCH Forms 06 & 12 ¿ 2/5 8:00 AM – 4:30 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 1 - Practical Fundamentals and Theory of HVAC/R Systems � 2/18 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 2 - Essential HVAC/R System Motor Theory for the Field Technician � 2/19 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 3 - Different Electrical Components Found in the HVAC/R Industry ¿ 2/25 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Electrical Module Part 4 - Electrical Schematics: A Roadmap to Diagnosing a HVAC/R System ¿ 2/26 6:00 PM – 9:00 PM
NCI: Airflow Testing & Diagnostics Technical Training Discover Hidden Causes to Common Customer Complaints ¿3/3 8:30 AM – 5:00 PM
NCI: Refrigerant-Side Performance Certification Program Part 1 Equipment Performance of the Air & Refrigerant-Side ¿3/4 8:30 AM – 5:00 PM
NCI: Refrigerant-Side Performance Certification Program Part 2 Refrigerant-Side Basics, Diagnostics, and Opportunities ¿3/5 8:30 AM – 5:00 PM
IHACI: (CAQI/QM/QS) Air Distribution Module Part 1 - Practical Fundamentals and Physical Properties of Air ¿ 3/11 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Air Distribution Module Part 2 - Practical Fundamentals and Theory of Proper Air Distribution Design ¿ 3/12 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Air Distribution Module Part 3 - Practical Fundamental Theory and Techniques of Air Side Design and Installation ¿ 3/18 6:00 PM – 9:00 PM
IHACI: (CAQI/QM/QS) Air Distribution Module Part 4 - Advanced Theory and Techniques of Air Side Design and Installation ¿ 3/19 6:00 PM – 9:00 PM
Residential and Light Commercial HVAC ¿ IDSM
3/31 8:30 AM – 4:00 PM
Zero Net EnergyZero Net Energy Design Residential ¿ 1/14 12:30 PM – 4:30 PM
ON-DEMANDTo enroll in a class visit us at on.sce.com/On-Demand
6 7
SustainabilityCommercial Solar Overview
Residential Solar Overview
Lighting TechnologiesFrom Fluorescent to Induction: An Area of Lamp Efficiency AIA
Introduction to Lighting AIA
Review of Lighting Fundamentals
Power Clips – Lighting
Power Clips – IDSM
Foodservice TechnologiesHot Rebates, Cool Savings
HVAC/R Systems & TechnologiesIntroduction to Heating, Ventilating and Air Conditioning (HVAC)
Introduction to Portfolio Manager
Save Energy, Save Money
Power Clips – HVAC
Q1 | 2020 Workforce Education & Training Workforce Education & Training Q1 | 2020
ON-LOCATIONTo enroll in a class visit us at on.sce.com/workshops
Energy Codes & Standards2019 Title 24 Part 6 Essentials: Residential Standards - Plans Examiners & Building Inspectors ¿ 1/9 8:30 AM – 4:30 PM Malibu City Hall (Multi Purpose Room)
Title 24: Where We’re Headed with the 2019 Standards ¿ IDSM
3/27 8:30 AM – 12:30 PM Frontier Project, Rancho Cucamonga
HVAC/RVariable Refrigerant Flow and Ductless Systems - Design and Application � 1/24 8:30 AM – 12:30 PM Irvine City Hall
Basic Heating, Ventilating and Air Conditioning (HVAC) � IDSM 2/13 8:30 AM – 12:30 PM Irvine City Hall
WEBINARTo enroll in a class visit us at on.sce.com/workshops
8 9
Commercial/IndustrialIntroduction to Programmable Logic Controllers: Energy Efficiency Applications (WEBINAR) � IDSM
2/24 8:30 AM – 4:00 PM
Introduction to Programmable Logic Controllers: Energy Efficiency Applications (WEBINAR) � IDSM
3/23 8:30 AM – 4:00 PM
Introduction to Programmable Logic Controllers: Energy Efficiency Applications (WEBINAR) � IDSM
3/23 8:30 AM – 4:00 PM
Q1 | 2020 Workforce Education & Training
TOOL LENDING LIBRARYThe Tool Lending Library program loans tools free of charge to customers working on short-term energy-efficiency projects.
Tool users include building owners, facility managers, as well as energy services professionals in California. The range of tools includes lighting and plug load data loggers, infrared cameras, and air flow measurements tools for HVAC equipment.
The tools can provide information, help to troubleshoot performance problems on how to save energy and money.
To check out a tool go to sce.com/tools
PATHWAY 2045
GOING NEUTRALBy 2045, California will be powered by 100% carbon-free electricity. All greenhouse gas emissions (GHGs) produced by the economy will subsequently be removed from the atmosphere through carbon sequestration, also known as carbon sinks.
Going neutral will require planning to keep energy safe, reliable and affordable for all Californians.
For more information and to read the paper, visit edison.com/pathway2045
450
400
350
300
250
200
150
100
50
0
2017424 MMT
MMT (
MILL
ION
METR
IC TO
NNES
OF C
O 2)
2045108 MMT
-108 MMT
Carbon Sequestration
Electricity
Buildings
Transportation
Industrial
Agriculture
we m
DECARBONIZE ELECTRICITY
100%RETAIL SALES
ELECTRIFYBUILDINGS
70%OF BUILDINGS
SINK REMAINING CARBON
CO2108
MMT
CO2
CO2
CO2ELECTRIFY TRANSPORTATION
ES75%
OF VEHICL
USE LOW CARBON FUELS
43%NON-ELECTRIC
ENERGY
By 2045, California will emit only a quarter of the GHGs emit today. The same amount of GHGs will be removed fro
the atmosphere, getting us to carbon neutrality.
Carbon neutrality will require electrification
across the state’s economy by 2045.
IRWINDALEContact us: 800-336-2822 [email protected]
Location: Energy Education Center – Irwindale 6090 N. Irwindale Ave. Irwindale, CA 91702
Register for classes at sce.com/workshops
TULAREContact us: 800-772-4822 [email protected]
Location: Energy Education Center – Tulare 4175 S. Laspina St. Tulare, CA 93274
Register for classes at sce.com/workshops
Cancellation Policy:Classes are held subject to enrollment. If you are unable to attend, please call to cancel your reservation as soon as possible. More than two no-shows will jeopardize your ability to register for future classes.
Note: Children under the age of 16 are not permitted to attend or participate in our adult education classes and workshops.
Allreservationsaresubjecttospaceavailability.Reservationswillbeheldfor15minutesfollowingthestartofclassafterwhichtimeyourseatmaybegiventoawaitingcustomer.Pleasebringyourconfirmationwithyoutoeachevent.TheEnergyEducationCenterreservestherighttocancelanyclass/workshop/event.
Disclaimer:Contentofclassesandotherprograminformationisgeneralinnatureandnotguaranteedorwarrantedtoprovidesolutionstoanyspecificsituation.Contentisprovidedforinformationonly.SCE’sEnergyEducationCenter–Tulareisnotresponsiblefortheviews,interpretationsorrecommendationsmadeinanyprogramthatreflectthepositions of the presenters. SCE does not endorse any particular product, manufacturer or service discussed and does not represent any goods or services for any purpose or use otherthandemonstration.AllclassesareofferedatnochargetoSCEcustomersunlessotherwisestated.
