Energy Controlling.Ancillary Costs.

Energy Controlling Made Simple.

Developer Trustee

Energy Consulting

Energy Controlling

and Ancillary Costs

Renewable Energy

We capture, analyse and evaluate the energy data generated by your buildings and systems. Countinuously. An energy-efficient building cuts costs and has lower CO2 emissions. This is only possible if the energy flows are transparent. The answer is energy controlling.

You gain this transparency without having to use your own human resources and without installing an additional software. Nevertheless, you still have easy control over your energy flows. We perform this task for you. We capture your energy and operational data fully automatically, evaluate it and provide you with customised reports and graphical evaluations such as load profiles, energy balance sheets, key data, etc.

This detailed information of your energy consumption and the benchmarks derived from this enables you to recognise and realise your potential for optimisation. We show you where this potential lies. We even go one step further by actively inform-ing you about any energy-relevant malfunctions. Thanks to this early-warning sys-tem we prevent any unnecessary energy costs from being incurred.

Our Products.

Energy ControllingIn energy controlling energy and water data are automatically captured and ana-lysed every 15 minutes and furthermore evaluated by using the e3m-Software. Enastra is responsible for operative energy controlling and contacts you in case of any irregularities in your consumption values. The customer doesn’t need to assign any of his or her human resources for energy controlling.

Energy MonitoringIn energy monitoring energy and water data are automatically captured every 15 minutes analogous to the energy controlling system. The customer analyses and evaluates the data with the help of e3m software and also performs actions using his or her own personnel resources.

Energy AccountingIn energy accounting energy and water data are periodically recorded per property using manual readings and a tablet, for example. Energy accounting is suitable for smaller properties where automatic data capture would turn out to be too complex. Energy accounting is also ideal for multisite clients and the generation of bench-marks across different buildings.

Ancillary Costs Our energy controlling, energy monitoring and energy accounting products build the perfect basis for simplified ancillary costs invoicing. We develop customised models for the management of large real estate portfolios which make the invoic-ing of ancillary costs charges easy and transparent. Through usage-related charg-es of heating and operating costs to specific consumers tenants are sensitised and their energy awareness encouraged.

The different products are perfectly tailored to one another and can be flexibly combined according to your building portfolio.

Package:

EnergyConsumption

Monitoring

Package:

Energy Controlling

Package:

Functions Monitoring

Set up Automatic Data Transmission

Standard Data Centre

Licences

Basic Training

Third-Level Support

Import of Historical Data

Initial Meter Plausibility Check

Detailed Training

Devise a Meter Structure Scheme

Optimise the Measurement Concept

Initiate Benchmarking

Set up Ancillary Costs Invoicing

Set up Manual Entry

Monitoring of Data Integrity and Avail-ability

Continuous Meter Value Plausibility Checks

Alarm Handling

Keep Logbook

Data Analysis: Evaluate Key Data, Gauge Savings Potential

Regular Meetings with the Customer

Help with Ancillary Costs Invoicing

Consumption Monitoring

Project Modules. Operational Modules.

Maximum Flexibility.

Customized Service ModulesEnergy controlling is introduced in the project where the requirements defined together with the customer and then will be realised in the system. Energy con-trolling will then be applied to your systems where data is permanently record-ed and evaluated. The customer has the opportunity to compile service mod-ules which are perfectly adapted to his or her requirements for both, the project and for actual operation.

Basic Module

Additional Module

Energy Control Hosting Centre

Data Analysis

Internet

Data Transmission

Data Capture and Entry

Data Capture

Electrical EnergyWater

Electrical EnergyFuel OilHeat/ColdWater

Electrical EnergyGasWater

Meters in the Building

Energy controlling forms the ideal basis for a successful and sustainable opti-misation of your technical equipment. As an effective instrument for the man-agement of buildings the significance of energy control systems is thus steadily increasing.

Similar to financial controlling energy flows are permanently monitored by these systems, providing the following advantages:

• Permanent Monitoring of Energy Flows: creates transparency regarding en-ergy consumption and energy costs within a company.

• Potential Savings: are identified and specified.• Energy Disruptions (Malfunctions): these trigger alarms, thanks to which the

cause thereof can be immediately rectified and therefore additional costs can be avoided.

• Reporting: simple, uniform and customised; can also be taken as a basis for environmental reports.

• Benchmarking: comparable values from similar or identical buildings indicate where savings can be made.

• ISO Standard 50001: energy controlling provides the basis for compliance with this standard.

• Ancillary Cost Invoicing: energy data can be transferred via a simple interface for administration purposes.

• Ecological Practice: concrete proof of consumption can be provided to ten-ants and the public.

• Labels and Certificates: energy controlling makes it possible to monitor whether label criteria are adhered to or not.

Diverse Benefits.Energy Controlling.

Enastra AGwww.enastra.chinfo@enastra.ch