Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
ENCLOSURE: G
ADDITIONAL ATTACHEMENTS
INDEX FOR ADDITIONAL ATTACHMENTS
Sr. No. Name of Enclosure
1. Name of Product with its quantity.
2. Packing, Storage and Final use of Product.
3. Physical & Chemical properties of Products
4. Name of Raw Material with its quantity.
5. Storage facility of Raw Material
6. Manufacturing Process with Chemical Reactions
7. Mass Balance of the Product
8. Details of water consumption and waste water generation
9. Effluent Treatment Plant Details
10. Effluent Treatment Plant Flow diagram
11. Details of Flue gas emission and process gas emission with APCD system
12. Fuel Details
13. Details of hazardous waste generation with its management.
14. Name & Address of Directors.
15. Land Supporting documents
16. Site Plan & Layout Plan of Unit.
17. Existing Consent Order Copy
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 01
Name of product with Qty.
Sr. no.
Name of Product Quantity in MT /M
Existing Proposed Total After product Mix
1 Ketonic Resin 50 250 300
2 M.F.Resin 30 20 50
3 Water Base Adhesive 150 50 200
4 PVB (Poly Vinyl Butryl Resin)
0 50 50
5 Adhesion Promoter TA ‐10 0 20 20
230 390 620
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 02
Packing & Final Use of Products
Sr No Name of proposed Product Type of Packing
Final application of product
1 Ketonic Resin 15 Kg Paper bag
Ink, paint & coating industries
2 MF Resin 25 kg Paper bag
3 Water Based Additive 200 kg Drum
4 Poly Vinyl Butyl Resin 10 Kg Paper bag
5 Adhesion Permoter(TA‐10 200 kg HDPE Drum
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 03 Physical & Chemical Properties of Products
Sr.
No.
Name of the Products
State Main Properties (refer MSDS)
B.P.
º C
M.P.
º C
Flash
Point
º C
LEL
UEL
%
TLV ppm or
mg/m3
LD50
mg/kg
1 Ketonic Resin Solid NA 95 >149 NA NA NA
2 MF Resin
Powder NA >200 F NA 0.75
ppm
500 mg/Kg
3 Poly Vinyl Butyl Resin
Solid
NA 105‐125
300 F ND NA 10000
mg/kg Rat
4 Water Based Additive
Liquid NA NA >100 C NA NA NA
5 Adhesion Permoter (TA‐10)
Liquid NA NA 30 NA NA NA
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 04
Name of Raw Material with its Quantity
Sr. No.
Name of product Capacity TPM
Name of R.M. Raw Material Consumption MT /MT of product
MT per Month
1 Ketonic Resin 250 Cyclohexanone 0.7737 193.425 Formaldehyde 1.1315 282.875 Caustic Soda 0.05 12.5
2 M F Resin 50 Melamine 0.219 10.95 Formaldehyde 0.756 37.8 Butanol 0.405 20.25 Xylene 0.081 4.05
3 Water based additives
200 Butyl acrylate 0.367 73.4 Methyl acrylic acid 0.0128 2.56 Acrylic acid 0.0285 5.7 Vinyl acetate 0.19 38.0 Dibutyl maleate 0.0928 18.56 Additives 0.022 4.4
4 Poly Vinyl Butyrl Resin
50 Poly Vinyl alcohol 0.75 35.0 n‐butryaldehyde 0.4 20.0 Additives 0.08 4.0
5 Adhession Promoter (TA‐10)
20 Acetyl aceton 0.53 10.6 t‐Iso propyl titanate
0.4 8.0
Additives 0.07 1.4
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Sr. no. Name of Raw Material Quantity MT /M
1 Cyclohexanone 193.425 2 Formaldehyde 320.675 3 Caustic Soda 12.5 4 Melamine 10.95 5 Butanol 20.25 6 Xylene 4.05 7 Butyl acrylate 73.4 8 Methyl acrylic acid 2.56 9 Acrylic acid 5.7 10 Vinyl acetate 38.0 11 Dibutyl maleate 18.56 12 Additives 9.8 13 Poly Vinyl alcohol 35.0 14 n‐butryaldehyde 20.0 15 Acetyl aceton 10.6 16 t‐Iso propyl titanate 8.0
Total 783.47
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 5
Storage Facility of Raw Material
No. Name of Raw Material
Chemical Name Physical Form
Container Type
MOC of container
1. Cyclohexanone Cyclohexanone Liquid Tank SS 304
2. Formaldehyde Formaldehyde Liquid Tank HDPE
3. Caustic soda
Flakes
Sodium Hydroxide solid Bags HDPE
4. Xylene xylene Liquid Tank HDPE
5. Poly vinyl
Alcohol
Ethanolhomo polymer solid Bags HDPE
6. n- Butaldeyade n- Butaldeyade Liquid Tank HDPE
7. Acetyl acetone 2,4-Pentanedione Liquid Tank HDPE
8. t-Iso propyl
titrate
t-Iso propyl titrate
Liquid Tank HDPE
9. Melamine 1,3,5Triazine2,4,6
triamine
solid Bags HDPE
10. Butanol Butanol Liquid Drum HDPE
11. Butyl acrylate Butyl acrylate Liquid Tank HDPE
12. Methyl acrylic acid Methacrylllic Acid Liquid Drum HDPE
13. Acrylic acid Prop-2-enoic acid Liquid Drum HDPE
14. Vinyl acetate Vinyl Acetate Liquid Tank HDPE
15. DIbutyl maleate DIbutyl maleate Liquid Drum HDPE
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Sr. No.
Name of Raw Material
Container Type
MOC Container
Physical form Max. Storage Capacity
in MT
At a time storage in MT
1 Cyclohexanone Tank SS 304 Liquid 25 19.5
2 Formaldehyde Tank HDPE Liquid 40 37
3 Caustic Soda Bags HDPE Solid 3 0.5
4 Xylene Tank HDPE Liquid 1 0.2
5 Poly Vinyl Alcohol Bags HDPE Solid 20 10
6 N – Butryaldehyde Tank HDPE Liquid 16 5
7 Acetyl Acetone Tank HDPE Liquid 1 0.2
8 T – Iso propyl titanate
Tank HDPE Liquid 1 0.2
9 Melamine Bags HDPE Solid 5 10
10 Butanol Drum HDPE Liquid 10 10
11 Butyl Acrylate Tank HDPE Liquid 20 20
12 Methyl Acrylic Acid Drum HDPE Liquid 1 5
13 Acrylic Acid Drum HDPE Liquid 5 5
14 Vinyl Acetate Tank HDPE Liquid 20 20
15 Di Butyl Maleate Drum HDPE Liquid 10.0 20.0
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Sr. No.
Name of R.M. Place of Its storage State Operating Pressure, Temp.
Possible Type of hazards
Control measures provided
1 Cyclohexanone Storage Tank
SS 304
Norma( Liquid) at RT Flammable Fire extinguisher, double earthing, bonding on flange joint, level indicator, flame proof fitting, water shower etc. provided.
2 Formaldehyde Storage Tank
HDPE
Normal(Liquid) at RT Skin sensitivity,
Suspected
Carcinogen
Wear gloves,goggles,gas mask, closed system
3 Caustic Soda RM Storage
Yard/bags
Normal(Solid) at RT Skin sensitivity
Wear gloves,goggles,gas mask, closed system
4 Xylene RM Storage
Yard/Storage tank
Normal (Liquid)
at RT
Flammable Fire existingusher, double Earthing, bonding on flange joint,level indicator, flame proof fitting, water shower etc
5 Poly Vinyl Alcohol RM Storage
Yard/bags
Normal(Solid) at RT None Use Rubber gloves
6 N – Butryaldehyde RM Storage
Yard/Storage tank
Normal (Liquid)
at RT
Flammable Fire extinguisher, double earthing, bonding on flange joint, level indicator, flame proof fitting, water shower etc
7 Acetyl Acetone RM Storage
Yard/Storage tank
Normal (Liquid)
at RT
None Use Rubber gloves & goggles
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
8 T – Iso propyl titanate
RM Storage
Yard/Storage tank
Normal (Liquid)
at RT
None Use Rubber gloves & goggles
9 Melamine Bags Normal (Powder)
at RT
Toxic
Nonflammable
Wear gloves,goggles,gas mask, closed system
10 Butanol Drum Normal (Liquid)
at RT
Flammable Fire extinguisher, double earthing, bonding on flange joint, level indicator, flame proof fitting, water shower etc
11 Butyl Acrylate Tank Normal (Liquid)
at RT
Flammable
Monomer
Wear gloves,goggles,gas mask ,closed system
12 Methyl Acrylic Acid Drum Normal (Liquid)
at RT
Non
Flammable
Wear gloves,goggles,gas mask ,closed system
13 Acrylic Acid Drum Normal (Liquid)
at RT
Non Flammable
Wear gloves,goggles,gas mask ,closed system
14 Vinyl Acetate Tank Normal (Liquid)
at RT
Flammable
monomer
Fire extinguisher, double earthing , bonding on flange joint, level indicator, flame proof fitting, water shower etc
15 Di Butyl Maleate Drum Normal (Liquid)
at RT
Flammable
monomer
Fire extinguisher, double earthing , bonding on flange joint, level indicator, flame proof fitting, water shower etc
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 06 Manufacturing Process with Chemical Reaction
1. KETONIC RESINS:
Charge cyclo hexane none and formaldehyde through measuring tank in a reactor. Then start addition of caustic soda lye and maintain the temperature 70 to 75 0C by jacketed cooling and hold for two hours. After start cooling up to 40 to 450C Temperature and allow to settling down. Discharge bottom layer in another reactor for cooking up to the requirement melting point and upper layer is drain into ETP for Treatment
n
H2 H2
O
O C
C
O
O
+7 CH2O 4 CH2OH
37% FORMALDEHYED 30
CYCLOHEXANE 98
+ 4 H2O MW APP 600-800
KETONIC RESIN STRAIGHT CHAIN
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
2. POLY VINYL BUTRYL RESIN:
Charge water and PVA in Reactor& prepare solution by stirring.add additives, mix for one hour then start addition of n-butryaldehyde and allow to setting down for two hours, removing upper layer drain to ETP for treatetment.Wash bottom layer with water. Wash water is drain in to ETP. Wet cake is dried & packed.
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
H
O
+ R’ - OH RC OR
OH
H
+ R’ - OH R C (-OR’) 2+ H2O
H
Aldehyde Alcohol Hemi acetyl Alcohol Acetyl
CH2
C
O
C3H7
O
C C
H
H
CH2 C
H
OH
CH2 C
H
O
CH3
C
O
PV Butryl PV Alcohol
PV Alcohol
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
3. ADHESION PERMOTER
Charge Acetyl Aceton and TIPT in Reactor, & mixed for one hour and Add additives within three hours time then packed as final product
C3H7OH + C4H10O+ (C3H7O)4 Ti
4. MF RESIN:
Charge melamine& formaldehyde through measuring tank in reactor, mix for 1 hour than start addition of Butanol within water within 3 to 4 hours& maintain the temperature 600C by Jacket cooling& hold for 2hrs after start cooling up to 40 to 45 0C& filter in filter nutch and packed as bye product. After reaction is over, water is removed by dehydration Butanol appears with the product. Very small quantity of xylene is
Recovered by distillation along with Butanol and recycled.
TI(OiC3H7O)4
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Stage-1: Mono Urea Formaldehyde
Stage-2: Di urea formaldehyde
Stage-3: Melamine Urea Formaldehyde Glue
O = C NH2
NH2 O = C
NHCH2OH
NHCH2OH + O = C
NHCH2OH
NHCH2NH - C NH2
O
Di urea Formaldehyde
M.W: 162
Mono urea Formaldehyde
M.W: 120
O = C
NH2
NH2
+ HCHO
O = C
NHCH2OH
NH2
O = C
NHCH2OH
NHCH2OH
+ HCHO
Urea
M.W: 60
Formaldehyde
M.W: 30 Urea Formaldehyde
Resin
+ nNH2CONHCO NH2
Melamine M.W: 126.13
NH3
N N
N H3N
NH3
NH2CONHCONH
N N
N HN
NH3
n
+ H2O
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
5. WATER BASED ADDHETIVES
Charge Butyl Acrylate &Meta Acrylic acid in water for mixing in tank. Start stiring for two hours for proper mixing of monomer. Then charge in a reactor &keep the temperature up to 600 0C by Stem in jacketed then add adhesive& mix for one hours then start addition from mixing up to600c by steam in jacketed then add adhesive& mix for one hours then start addition form mixing vessel by rotameter for three hours after cool down temperature at 4000C&then packed. This is a formulation process, there is no generation of any effluent as water added remain with product.
C C +Additives
O
O O
O
C C
Monomers like
C C
Butyl Acrylate Methyl Acrylic Acid Acrylic acid Vinyl Acetate Di Butyl Maleate
Free radicals of monomers
C C
C C Polymer of monomers
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 07
Mass Balance of the Products
1. KETONIC RESIN
REACTOR
CYCLOHEXANONE: 773.7KGS
SLUDGE:19KGS FORMALDEHYDE:1131.5 KGS
CAUSTIC SODA:50KGS
TSDF,Vapi WATER:1354 KGS
COOKING EFFLUENT:2290.2KGS
ETP
BREKING
PACKING IN BAGS
KETONIC RESIN:1000 KGS
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
2. POLY VINYL BUTYRL RESIN
Upper Layer: 10230 Kgs
Reactor
Poly Vinyl Alcohol: 750kgs
N- ButyrlAldehyed: 400kgs
Water: 10000 Kgs
Additives: 80 Kgs
Settling
ETP
Bottom Layer Wash Water: 16166.66 Kgs
ETP
Drying: 1500kgs
Poly VinyalButyrl Resin: 1000 Kgs
Evaporation Loss: 500kgs
Wash Water: 16166.66 Kgs
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
3. ADHESION PERMOTER
Acetyl Acetone: 530 Kgs
TIPT: 400 Kgs
Additives: 70 Ks
Reactor
Mixing
Packing in Drums
Adhesion Permoter: 1000 Kgs
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
4. M.F. RESIN
Melamine: 406 Kgs
Formaldehyde: 1400Kgs
Mixing Tank
1806 Kgs
Jacketed : Heat upto 600C
Packing
M.F. Resin: 1850 Kgs
Butanol: 1250 Kgs
500 Kgs Recyle + 750 Kgs Fresh
Xylene: 150 Kgs
Cooling
DehydrationDistilled water: 856
Liter
Distillation Recovered Xylene with Butanol: 500 Kgs
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
5. WATER BASED ADDITIVES
Butyl Acrylate: 1103.6 Kgs
Methyl Acrylic Acid: 38.6 Kgs
Water : 857.1 Liter
Mixing Tank
Jacketed: Heat upto 600C
Packing
Water Based Additives: 3000 Kgs
Additive: 66.4 Kgs
Acrylic Acid : 85.7
Vinyl Acetate: 570 Kgs
Dibutyl Maleate: 278.6
Mixing Tank
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 08
Water Consumption and Wastewater generation
Calculation of water consumption & Wastewater generation (For Process)
Sr. No.
Product Batch Size in Kgs
Production in MT /M
No. of Batches per Month
Water Consumption Liter /batch
Effluent Generation Liter /Batch
Water Consumption Liter /day
Effluent Generation Liter /day
Process Washing Process Washing Process Washing Process Washing
1 Ketonic Resin 1000 300 300 1354 0 2290 0 16248 0 27480 0
2 Poly Vinyl Butyrl Resin
1000 50 50 10000 16666 10230 16166 20000 33332 20460 33332
3 Adhesion Permoter
1000 20 20 0 0 0 0 0 0 0 0
4 MF Resin 1850 50 27 0 0 856 0 0 0 925 0
5 Water based Additives
3000 200 67 857 0 0 0 2297 0 0 0
Total 38545 33332 48865 33332
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Water Consumption In KL /Day
Effluent Generation in KL /Day
Existing Proposed Total After
Expansion
Existing Proposed Total After Expansion
Domestic 2.0 2.0 4.0 1.0 1.0 2.0 Industrial
Process 4.8 67.2 72.0 5.0 77.3 82.3 Washing 21.0 4.0 25.0 21.0 4.0 25.0
Boiler 1.0 3.0 4.0 0.5 0.5 1.0 Cooling 2.0 1.0 3.0 0.5 0.1 0.6
Gardening 1.0 1.0 2.0 0.0 0.0 0.0 Total 31.8 78.2 110.0 28.0 82.9 110.9
1. Domestic effluent is discharged through Septic tank/soak pit. 2. Total 116.0m3/day of water will be used for industrial activity&4.0m3/day of water
used for domestic activity. 3. Boiler condensate shall be recycled as boiler feed water. Softening rejection, boiler
blow down & Steam loss shall be compensating by fresh water. Softening rejection and boiler blow down shall be drain to ETP.
4. Cooling water is recirculated through cooling tower. Cooling tower Blow down and evaporation loss shall be compensated by fresh water. Cooling tower blow down shall be drain to ETP.
5. Floor/container washing shall be drain to ETP. 6. Thus total 118.90m3/Day of industrial effluent will be generated, which will treat in
primary, secondary & tertiary treatment plant& discharge into CETP, Vapi.
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:09
Details of Existing Effluent Treatment Plant:
Sr.
No. Name of Unit
Capacity
(m3)
Retention Time
(hr)
MOC
1 Oil & Grease trap 2.5 2.29 RCC
2 Collection tank 18 16.48 RCC
3 Neutralization Tank 18 16.48 RCC
4 Flash Mixer / Flocculator Channel 1 -- RCC
5 Lime Slurry Preparation Tank 0.5 -- HDPE
6 FeSO4 Tank 0.2 -- HDPE
7 Poly Electrolyte Tank 0.5 -- HDPE
8 Primary Clarifier 4.5 4.12 MS /EPOXY
9 Aeration tank 60.0 54.96 RCC
10 Diffused Aeration system -- -- HDPE
11 Air Blower 7.5 hp -- CI
12 Secondary Clarifier 15.5 14.20 RCC
13 Filter Pump -- -- CI
14 Sand Filter 3.5 3.20 MS
15 Activated Carbon Filter 3.5 3.20 MS
16 Sludge Drying Bed 8.0 -- Brick
For proposed expansion activity, Effluent Treatment Plant will be modified as per the treatability Study Report.
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:10
Effluent Treatment Plant Flow diagram:
Collection
Tank
Oil & Grease Tank
Neutralization tank
Sand Filter
Primary clarifier
Aeration Tank
Sludge drying Bed
Activated Carbon
Holding tank
Secondary Clarifier
FeSO4 tank
Poly Electrolyte
Lime slurry
Flash mixer
Effluent
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:11
Details of Flue Gas Emission &Process Gas Emission with APC system
Type of Flue Gas Emission:‐
No. Stack attached To Stack Height
(Meter)
APC Measures
Pollutants
SPM
Mg/NM3
SO2
ppm
NOX
ppm
1. Thermic fluid
Heater
2 lakh kcal/hr
(Proposed)
11 ‐‐‐
< 150 mg/NM3
< 100 ppm
< 50 ppm
2 Steam boiler
800 kg/hr
(Existing)
11 ‐‐‐
< 150 mg/NM3
< 100 ppm
< 50 ppm
3 D.G. Set
125 KVA
(Proposed)
11 ‐‐‐ ‐‐ < 100 ppm
‐‐
Type of Process Gas Emission:‐ There will be no process emission from our proposed manufacturing activity.
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:12
Details of Fuels
Sr.No Name of Fuel Total
Existing Proposed Total
1 LDO 200 Liter /Day 800 Liter /Day 1000 Liter /Day
2 HSD 0 20 Lit/hr 20 Lit/hr
3 Natural gas 200 scm /Day 800 scm /Day 800 scm /Day
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:13
DETAILS OF HAZARDOUS WASTES GENERATION AND ITS MANAGEMENT
No Type of waste Category Quantity
Management
1 ETP Waste, 34.3 7.2 MT /Yr
92.8 MT /Yr
100 MT /Yr
Collection, Storage, Transportation, Disposal to TSDF site
2 Process Waste 0.06 MT /Yr
68.34 MT /Yr
68.4 MT /Yr
Collection, Storage, Transportation, Disposal to CHWIF.
3 Used oil 5.1 25 Liter /Yr
10 Liter /Yr
35 Liter /Yr
Collection, Storage, Transportation, sell to authorize recycler.
4 Discarded Container 33.3 14400 Nos ./Yr
20000 Nos ./Yr
34400 Nos. /Yr
Used for packing of ETP waste or return back to raw material supplier.
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure: 14
Name & Address of Director
Sr .No Name of Proprietor Address 01 Vinaykumar V Oza 102, Anukul Complex, 1st floor,
Koperli Road, Vapi. 02 Ansari Atikur Raheman Vakil
104, Al Husen Palace, Godalnagar, Vapi
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:15
Land Supporting Document
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:16
Site Plan & Layout Plan
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
Enclosure:17
Existing Consent Order Copy
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit
M/s. Tridev Resins (I) Pvt Ltd., Plot No. 136/E-1, Phase II, GIDC Estate, Vapi – 396195, Dist – Valsad. EC Application for: Expansion in Existing unit