EN1154 SPECIFICATION · of closer from door, which provides greater safety, smoother operation and more appealing aesthetics. - Door Hold-Open Hold-Open arm allows door to be held

EN1154 SPECIFICATION

Version: 2015.10

UNISON HARDWARE, INC.www.inoxproducts.com

TABLE OF CONTENTS

Disclaimer: All information in this catalog has been deemed accurate as of the date of printing. We are continuously improving and expanding our line in an effort to offer our clients the finest quality products and services. Therefore, Unison Hardware, Inc., reserves the right to alter this information or correct printing errors at any time. C 2015 Unison Hardware, Inc. All Rights Reserved.

EN1154 Standard Explained ………………………………………………

How to Order ………………………………………………………………

DC4025 Series Door Closer …………………………………………………



Page 1

Page 3

Page 4

Page 8

Page 12

SCOPEThe European standard provides details of controlled door closing device on product types, classification by use, test cycles, door mass, corrosionresistance, as well as definitions, product performance requirements, test apparatus, test methods and marking of products

CLASSIFICATIONEN1154 classifies door furniture by using an 6 digit coding system. A similar classification applies to all building hardware product standards so that complementary items of hardware can be specified to, for instance, a common level of corrosion resistance, category of use, etc. Each digit refers to a particular feature of the product measured against the standard's performance requirements.

EN1154: 1997Digit 1Category of use

For all internal and external doors for use by the public, and others, with little incentive to take care, i.e. where there is some chance of misuse of the door.- grade 3: For closing doors from at least 105o open- grade 4: For closing doors from 180o openNote 1: Grade 4 classification assumes standard installation according toe the manufacturer's instructions.Note 2: For applications subject to extremes of abuse, or for particular limitations of opening angle, door closers incorporating a backcheck function or provision of a separate door stop should be considered.

Digit 2Number of test cycles

Only one test duration is identified for door closers manufactured to this standard:- grade 8: 500, 000 test cycles

Digit 3Test Door mass/size

Seven test door mass grades and related dorr closer power sizes are identified according to table 1 of this standard. Where a door closer provides a range of power sizes both the minimum and the maximum sizes shall be identified.Table 1

Door closer power size

Recommended door leaf width max. (mm)

Test door mass (kg)

1 <750 202 850 403 950 604 1, 100 805 1, 250 1006 1, 400 1207 1, 600 160

Controlled Door Closing Devices toEN1154EN1154: 1997 + A1: 2003

Version: 2015.10 OVERHEAD DOOR CLOSER

01Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com

DC4025/DC3003/DC2003 Series Door Closer are tested and certified to the following classificationDC4025 Series Door Closer

4 84

1 1 32

DC3003/DC2003 Series Door Closer4 8 3 1 1 3

DC4025/DC3003/DC2003 Door CloserDC4025 Series Door Closer

4 84

1 1 32

DC3003/DC2003 Door Closer

4 8 3 1 1 3


844

1 1 32


84 3 1 1 3


44 8 1 1 3

2


34 8 1 1 3

OVERHEAD DOOR CLOSER Version: 2015.10

02 Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected] Web: www.inoxproducts.com

Note 1: The door widths given are for standard installations. In the case of unusually high or heavy doors, windy or draughty conditions, or special installations, a larger power size of door closer should be used.Note 2: The test door masses shown are only related to door closer power sizes for the purpose of the test procedure. These test door masses are not intended to indicate maximum values for actual use.

Digit 4Fire behaviour

Two grades of fire behaviour are identified for door closing devices manufactured to this standard: - grade 0: Not suitable for use on fire/smoke door assemblies- grade 1: Suitable for use on fire/smoke door assemblies, subject to satisfactory assessment of the contribution of the door closer to the fire resistance of specified fire/smoke assemblies. Such assessment is outside the scope of this European Standard (See EN 1634-1).

Digit 5Safety

All door closers are required to satisfy the Essential Requirement of safety in use. Therefore only grade 1 is identified.

Digit 6Corrosion resistance

Five grades of corrosion resistance are identified according to EN 1670:- grade 0: No defined corrosion resistance- grade 1: Mild resistance- grade 2: Moderate resistance- grade 3: High resistance- grade 4: Very high resistance


14 84

1 32


14 8 3 1 3


34 84

1 12


34 8 3 1 1

CE MARKINGDoor closers intended for use on fire resisting doors and smoke control doors are covered by a Construction Products Directive mandate issued by the European Commission. Consequently, this standard is regarded as a "harmonised" standard and compliance with it, supported by suitable evidence, allows the application of the CE mark.

As closers for fire/smoke doors have a critical safety function, application of the CE mark will require the involvement of a notified certification body to provede verification of the compliance claims. This will involve initial type-testing of the product to EN 1154, initial inspection of the manufacturer's factory production control and continuing surveillance and approval of the factory production contol. On satisfactory fulfilment of these tasks, the notified body issues an EC Certificate of Conformity which then permits the manufacturer to declare compliance and affix the CE marking to his product.

Product IdentificationDC4025 BC -AL -FMT

Door Closer Series:DC4025DC3003DC2003

Finish:-AL = Aluminum Painted-WH = White Painted-BK = Black Painted-GD = Gold Painted

Cover:Blank = Less Cover (Standard)FMT = Door Closer with Metal Cover**Available only with DC3003 and DC4025

Function:Blank = Door Closer with Standard ArmBC = Door Closer with Back CheckST = Door Closer with Slide-track Arm*HO = Door Closer with Door Hold Open Arm*BC/HO/ST are not available for DC2003

How to Order


OVERHEAD DOOR CLOSERVersion: 2015.10


Specification and Features

- Full Rack and Pinion Construction Heat-treated rack and pinion immersed in high grade oil to give a smooth action and minimum wear and tear

- Adjustable Power Size (EN2 – EN5) Power Size can be adjustable by spring valve according to door width and weight variation.

DC4025 EN2 EN3 EN4 EN5Маx. Door Width (mm) 850 950 1100 1250Маx. Door Weight (kgs) 40 60 50 100Маx. Opening Angle 180° 180° 150° 120°

- Non Handed DC4025 can be universally fitted on both left and right handed swing door

- Flexible Mounting Position DC4025 can be installed on both pull and push side of door and can be fitted and both door and frame.

- Adjustable Latch and Closing Speed DC4025 is supplied with hydraulic controlled valves to adjust latch and closing speed.

- Adjustable Backcheck Backcheck feature set and adjusted by an independent valve to protect doorset from violent opening.

MaterialAluminum Alloy Pressure Die-Cast

ApplicationINOX DC4025 is a mainstream overhead door closer suitable for both interior and exterior door type.

DC4025 Series Door Closer

Standards and CertificationSuccessfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action /backcheck /adjustable closing force.

Successfully passed 60 minutes fire test of metal door assemblies to EN1634:2008

CE Marking: CE Declaration of Conformity available on request

All tests performed independently and certified by Intertek Testing and Certification Ltd. at UK

EN1154 Classification

4 84

1 1 32

Finishes- Silver - White - Black- Gold- Other finishes available on request

70°

15°

0°

110°

180°

For Slide-track Arm Mounting

Back Check

For Regular and Parallel Arm Mounting

Closing speed

Latching speed

* Dimensions in mm

23052

19 5118

.5

248




Optional Features- Delayed Action Additional adjustable valve can be included to allow additional time before closing.

- Closer Cover: DCCV40 Metal cover available to cover mounting screw holes and create a clean appearance

- Door Hold-Open Hold-Open arm allows the door to be held open at a preset angel for special occasion

- Slide-track Arm Mounting Slide-track arm mounting allows minimum overall projection of closer from door, which provides greater safety, smoother operation and more appealing aesthetics

DC4025 Item List

Item No. Description

DC4025 Door Closer with Standard Arm and BackCheck

DC4025DA DC4025 with Delayed Action

DC4025ST DC4025 with Slide-track Arm

DC4025DAST DC4025 with Slide-track Arm and Delayed Action

DC4025HO DC4025 with Hold Open Arm

-FMT Add FMT suffix for order with DCCV40 cover

*Dimensions in mm

254 45.5

5465°

0° 180°

Delay


Door Frame Mounting (Push Side)

Mounting Diagrams


Door Leaf Mounting (Pull Side)


* Dimensions in mm

* Dimensions in mm

201 102

230116.5

108.5

281 45

4660

20

52.5

19287

230

102 20145 281

52.5 19

6046

116.5

108.5

287


Parallel Arm Mounting (Pull Side)

Mounting Diagrams

Slide Track Mounting (Pull Side)


* Dimensions in mm

* Dimensions in mm


170

230 95

121

68

330

45

7819

108.

5

414

52

32

39.5

29

251955

.5

57.7

65.5 230

20


Material

Aluminum Alloy Pressure Die-Cast

Application

INOX DC3003 is an overhead door closer suitable for standard to medium weight doors for both interior or exterior application.

Standards and Certification

Successfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action /backcheck /adjustable closing force.

Fire Safety: Successfully tested on fire door assemblies according to EN1634-1


Fire Safety: Successfully tested on fire door assemblies according to UL 10C


Specifications and Features

- Slim DesignDC3003 has a compact size with minimized projection allowing installation to door's adjacent return wall

- Full Rack and Pinion ConstructionHeat-treated rack and pinion immersed in high grade oil for smooth action and minimum wear and tear

- Selectable Power Size by Mounting Position (EN2, 3, 4)DC3003 EN2 EN3 EN4

Max. Door Width (mm) 850 950 1050

Мax. Door Weight (kgs) 40 60 75

Мax. Opening Angle 180° 180° 100°

- Non HandedDC3003 can be universally fitted on both left and right handed swing doors

- Flexible Mounting PositionDC3003 can be installed on both pull and push side of door and can be fitted on both door and frame

- Adjustable Latching and Closing Speed DC3003 is supplied with hydraulic controlled valves to adjust latching and closing speed

Finishes

In Stock:- AL = Aluminum Painted- WH = White Painted- BK = Black Painted- GD = Gold Painted Other finishes available on request


4 8 3 1 1 3



Closing speed

Closing speed

Latching speed

Latching speed

* Dimensions in mm

220

200

19 52.5

43.5

12.5



Optional Features

- Adjustable BackcheckBackcheck feature set and adjusted by an independent valve to protect doorset from violent opening.

- Closer Cover: DCCV30Metal cover available to cover mounting screw holes and create a clean appearance.

- Slide-track Arm MountingSlide-track arm mounting allows minimum overall projection of closer from door, which provides greater safety, smoother operation and more appealing aesthetics.

- Door Hold-OpenHold-Open arm allows door to be held open at a preset angle

70o

110o

Back Check

For Slide-track Arm Mounting

180o0o For Regular and Parallel Arm Mounting

DC3003 Item List


DC3003 Door Closer with Standard Arm

DC3003BC DC3003 with BackCheck

DC3003ST DC3003 with Slide-track Arm

DC3003BCST DC3003 with Slide-track Arm and BackCheck

DC3003HO DC3003 with Hold Open Arm

-FMT Add FMT suffix for order with DCCV30 cover

50

22 4665

271.5



Mounting Diagrams




* Dimensions in mm

* Dimensions in mm


C4 5A

D

E 200 250

max. 15.5 (EN2)max. 19 (EN3/4)

EN424562

294160170

EN317562

22490

100

EN21758122490100

ABCDE

60

2419

50 33.5

B


Mounting Diagrams


Slide Track Mounting (Pull Side)

All dimensions showing below are in mm.


* Dimensions in mm

* Dimensions in mm


150

200 121

6845

50EN3

7019

17

100

200 43

1919

20

110EN3

39.5

56.8

29

414



Material

Aluminum Alloy Pressure Die-Cast

Application

INOX DC2003 is a cost effective overhead door closer suitable for light duty commercial application.

Standards and Certification

Successfully type-tested for conformity to all of the requirements of EN1154:1996/A1:2002/AC:2006 including the additional requirements for latch action/backcheck/adjustable closing force.

Fire Safety: Successfully tested on fire door assemblies according to EN1634-1




4 8 3 1 1 3

Available Finishes

- AL = Aluminum Painted- WH = White Painted- BK = Black Painted- GD = Gold Painted- Other finishes available on request

Specification and Features

- Rack and Pinion ConstructionHeat-treated rack and pinion immersed in high grade oil to give a smooth action and minimum wear and tear

- Fixed Power Size EN3

DC2003 EN3

Max. Door Width (mm) 950

Мax. Door Weight (kgs) 60

Мax. Opening Angle 180°

- Non HandedDC2003 can be universally fitted on both left and right handed swing door

- Adjustable Latching and Closing Speed DC2003 is supplied with hydraulic controlled valves to adjust latching and closing speed


15°

0° 180°Latching speed

Closing speed

DC2003 Item List


DC2003 Door Closer with Standard Arm

Latching speed Closing speed

* Dimensions in mm

165180

42.8

62.5

17.5

19




Mounting Diagrams




* Dimensions in mm

* Dimensions in mm

* Dimensions in mm

210

16554.5

45

5050

1919

38.5

144.5 79.5

23562EN3

62235

54.5

165

45.9

1950

79.5 144.545 210

42.5

EN3

90 121165

116

6845

1970

EN3


Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USATel: +1.916.388.1888 Fax: +1.916.388.8322 Email: [email protected]://www.inoxproducts.com

Please visit our website http://www.inoxproducts.com

for more technical and new product information.

Documents

EN1154 SPECIFICATION · of closer from door, which provides greater safety, smoother operation and more appealing aesthetics. - Door Hold-Open Hold-Open arm allows door to be held