ICS 79.040 Bauholz für tragende Zwecke – Festigkeitsklassen European Standard EN 338 : 2003 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 124 ‘Timber structures’ (Secretariat: Denmark). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee 04.01.00 Holzbau. Amendments This standard differs from the July 1996 edition in that additional strength classes have been specified and the requirements for assigning grades and species to strength classes have been amended. Previous edition DIN EN 338: 1996-07. Ref. No. DIN EN 338 : 2003-09 English price group 06 Sales No. 1106 01.04 DEUTSCHE NORM September 2003 EN 338 { EN comprises 8 pages. © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Structural timber Strength classes English version of DIN EN 338 Modifies DIN EN 10242, March 1995 edition. Supersedes July 1996 edition. --`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

EN 338-2003

Download PDF Report

Upload
kaspard
View
1.753
Download
1

Embed Size (px)

Citation preview

ICS 79.040

Bauholz für tragende Zwecke – Festigkeitsklassen

European Standard EN 338 : 2003 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by CEN/TC 124 ‘Timber structures’ (Secretariat: Denmark).The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Buildingand Civil Engineering Standards Committee), Technical Committee 04.01.00 Holzbau.

AmendmentsThis standard differs from the July 1996 edition in that additional strength classes have been specified andthe requirements for assigning grades and species to strength classes have been amended.

Previous editionDIN EN 338: 1996-07.

Ref. No. DIN EN 338 : 2003-09English price group 06 Sales No. 1106

01.04

DEUTSCHE NORM September 2003

EN 338{

EN comprises 8 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Structural timberStrength classes

English version of DIN EN 338

Modifies DIN EN 10242,March 1995 edition.Supersedes July 1996edition.

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---

April 2003

English version

ICS 79.040 Supersedes EN 338 : 1995.

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Structural timberStrength classes

Ref. No. EN 338 : 2003 E

Bois de structure – Classes derésistance

Bauholz für tragende Zwecke –Festigkeitsklassen

This European Standard was approved by CEN on 2003-02-14.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia,Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË

EN 338

--`,``,``,`,`,,,,,,``,``,`,`,`-`-`,,`,,`,`,,`---