Upload
scngarbage
View
212
Download
0
Tags:
Embed Size (px)
DESCRIPTION
DD
Citation preview
Haryana Institute of Technology EMI-1 lab
Haryana Institute of Technology(Approved by AICTE & Affiliated to MDU Rohtak)
ELECTRONICS & COMMUNICATION ENGINEERING DEPARTMENT
LAB REPORT(Electronics Measurement and Instrumentation)
NAME OF STUDENT _________________________________
ROLL No. _________________________________
SEMESTER _________________________________
SESSION _________________________________
STUDENT SIGNATURE_____________ FACULTY SIGNATURE ________________
1
Haryana Institute of Technology EMI-1 lab
This Guide is designed for helping the students to perform better in various practical Courses. It describes the structure of a good laboratory report, outlines the different
sections of the report and explains the need for each of them. It also introduces some
standard conventions and rules for writing reports of professional quality. The quality
of your written report will strongly affect your grade for the course.
EVALUATION OF PRACTICAL WORK
Each student will be required to perform the experiment individually.
Student will be required to write theory, algorithm, program, outputs etc. during
practical session itself.
Each experiment will be marked by the teacher on the basis of experiment
performed and write up on the same day. These marks will account for 40% of the
sessional marks.
Sessional marks will also include VIVA and Attendance marks as per rules.
GOOD LABORATORY PRACTICES
You must develop good laboratory habits by keeping complete laboratory notebooks.
Keep all your notes about the lab procedures and data in this notebook in pen. It is always better to read experiment in advance. The expectation is that you will work individually on separate computers. Each of
you will write a separate report. Please bring your lab manual to the lab on every turn.
2
Haryana Institute of Technology EMI-1 lab
THINGS TO DO AND DON’T DO IN THE LAB
DO’S Remember this is a practice lab & Keep silence.
Sit down in proper manner.
Lab instructor can help you to access software and printer.
If you require more in depth help you can ask concern lecturer
Proper shut down the computer system before leaving the lab.
Exit lab quickly, if short circuit or any emergency occurs.
You must entry when you enter and leave the lab.
DON’T Write any thing on the furniture.
Delete or change other student’s file.
Uninstall the any Software.
Inter change any Hardware.
Create, Change or remove any password.
Exhibit disruptive behavior.
Chatting and other banned sites.
Play computer games.
Eat and drink in Lab
EVALUATION REPORT
3
Haryana Institute of Technology EMI-1 lab
Sr. No.
Name of Experiment Date of Performance
Experiment Marks
Teacher’s Signature
1 Study blocks wise construction of a analog oscilloscope & Function generator
2 Measurement of dc motor by Electromagnetic pick up
3 Measurement of Strain using Strain Gauge
4 To measure the linear displacement by using inductive pick.
5 Study characteristics of Thermocouple
6 Study characteristics of Thermistor
7 Determine output characteristics of a LVDT and Measure displacement using LVDT
8 To study characterstic of platinium RTD
9 Measurement of displacement using capacitive pick up
10 To study light intensity measurement using photo register
4
Haryana Institute of Technology EMI-1 lab
Experiment No.:- 1 Date: - __/__/____
Aim Study blocks wise construction of a analog oscilloscope.
Apparatus Used:-
Theory:-
5
Haryana Institute of Technology EMI-1 lab
Diagram:-
6
Haryana Institute of Technology EMI-1 lab
Construction :-
Result:-
7
Haryana Institute of Technology EMI-1 lab
Viva Questions:
1. What is the function of storage mesh?
2. What is CRO?
3. What is the fuction of deflection plates ?
Faculty Signature……………. Date of Submission…………….
Experiment No.:- 2 Date: - __/__/____
8
Haryana Institute of Technology EMI-1 lab
Aim Measurement of dc motor by Electromagnetic pick up
Apparatus Used:-
Theory:-
Diagram:-
9
Haryana Institute of Technology EMI-1 lab
Procedure:-
10
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
11
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1. What is a LVDT?
3. What is Transducer?
2. On which axises time is measured?
Faculty Signature……………. Date of Submission…………….
Experiment No.:- 3 Date: - __/__/____
Aim To Measurement pressure using Strain Gauge.
12
Haryana Institute of Technology EMI-1 lab
Apparatus Used:-
Theory:-
Diagram:-
13
Haryana Institute of Technology EMI-1 lab
Procedure:-
14
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
15
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1. What is strain gauge?
2. In wire bound strin gauge,the change in resistance is due to which factor?
3. What are the application of unbounded strain gauge?
4. Explain different types of strain?
Faculty Signature……………. Date of Submission…………….
Experiment No.:- 4 Date: - __/__/____
Aim To measure the linear displacement by using inductive pick.
16
Haryana Institute of Technology EMI-1 lab
Apparatus Used:-
Theory:-
Diagram:-
17
Haryana Institute of Technology EMI-1 lab
Procedure:-
18
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
19
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1. what is the principle of self inductance?
Faculty Signature……………. Date of Submission…………….
Experiment No.:- 5 Date: - __/__/____
20
Haryana Institute of Technology EMI-1 lab
Aim Study characteristics of Thermocouple
Apparatus Used:-
Theory:-
Diagram:-
21
Haryana Institute of Technology EMI-1 lab
Procedure:-
22
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
23
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1. What is Thermocouple?
2. Which metal is in building the thermocouple?
3. What is the principle of thermocouple?
Faculty Signature……………. Date of Submission…………….
Experiment No.:- 6 Date: - __/__/____
Aim To Study the characteristics of Thermistor
24
Haryana Institute of Technology EMI-1 lab
Apparatus Used:-
Theory:-
Diagram:-
25
Haryana Institute of Technology EMI-1 lab
Precaution:-
26
Haryana Institute of Technology EMI-1 lab
Result :-
Viva Questions:
1. What is Thermistor?
2. What is the difference between thermistor and thermocouple?
3. Draw the range of thermistor?
Faculty Signature……………. Date of Submission…………….
Experiment No.:-7 Date: - __/__/____
Aim Determine output characteristics of a LVDT and Measure displacement using LVDT
27
Haryana Institute of Technology EMI-1 lab
Apparatus Used:-
Theory:-
28
Haryana Institute of Technology EMI-1 lab
Diagram:-
Procedure:-
29
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
30
Haryana Institute of Technology EMI-1 lab
Result :-
Viva Questions:
1. what is the principle of LVDT?
2. What is the value of voltage when core is in the center position?
3. In LVDT core is made up of which material?
Faculty Signature……………. Date of Submission…………….
Experiment No.:-8 Date: - __/__/____
Aim To study characterstic of platinium RTD
Apparatus Used:-
31
Haryana Institute of Technology EMI-1 lab
Theory:-
Diagram:-
32
Haryana Institute of Technology EMI-1 lab
Procedure:-
33
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
34
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1 .What is RTD
Faculty Signature……………. Date of Submission…………….
Experiment No.:9 Date: - __/__/____
Aim Measurement of displacement using capacitive pick up
Apparatus Used:-
35
Haryana Institute of Technology EMI-1 lab
Theory:-
Diagram:-
36
Haryana Institute of Technology EMI-1 lab
Procedure:-
37
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
38
Haryana Institute of Technology EMI-1 lab
Result:-
Viva Questions:
1. What is electric field?
2. Define Attenuator?
3. What is the function of buffer?
Faculty Signature……………. Date of Submission…………….
Experiment No.:-10 Date: - __/__/____
Aim To study light intensity measurement using photo register
Apparatus Used:-
Theory:-
39
Haryana Institute of Technology EMI-1 lab
Diagram:-
40
Haryana Institute of Technology EMI-1 lab
Procedure:-
41
Haryana Institute of Technology EMI-1 lab
Observation:-
Precaution:-
Result:-
42
Haryana Institute of Technology EMI-1 lab
Viva Questions:
1. What is the function of photoconductor?
2. What is the function of tacho generator.
Faculty Signature……………. Date of Submission…………….
43