“Helping to Protect You and Your Community with Quality Emergency Response Solutions”

Red Deer Branch, 6415 Golden West Avenue, Red Deer, AB 1-800-494-4210Abbotsford Branch, #103 - 2285 Queen Street, Abbotsford, BC 1-888-815-0500

www.rockymountainphoenix.com

Emergency Vehicles, Emergency Equipment & ServiceManitoba 2014

2

PPE - Stock Bunker Gear

The INNO55Q3™ is INNOTEX®’s higher-end stock gear model. The composite being used provides above average TPP and THL as well as exceptional durability. This gear will bring satisfaction and comfort to the most demanding firefighter.

There isn’t anything better than gear that fits properly. No restriction, just plain performance and safety. INNOTEX® turnout gear provides extremely durable, innovative protective features to firefighters and allows great freedom of movement in the most stressful environments.

3

The INNO5172™ provides price conscious firefighters with an honest level of protection. Innovative features such as the patented BR-1™ collar guarantee a high degree of safety wrapped into a very durable composite.

The INNO6222X™ is modeled after our X-Design™ style and provides firefighters with a coat shorter in the front and longer in the back. A 4-layer conventional collar also contributes to a more modern style. An overall great price / quality ratio for a very well equipped gear.

The INNO5222™ is the perfect gear for fire-fighters looking for a well-balanced price/quality ratio. Its classical design and six-layer patented BR-1™ collar will please any firefighter looking for tried and tested safety features.

The INNO65SB™ is the newest addition to INNOTEX®’s line of stock gear models. The INNO65SB™ provides innovative features such as the INNOTEX® variable height collar and the VizGrip™ enhanced visibility pockets. The INNO65SB™ bring complete protection to firefighters while delivering newly available features.

PPE - Stock Bunker Gear

4

The distinctive features of the INNO5000 Series™ are its unique patented (US patent 6,481,018 & Canadian patent 2,338,838) BR-1™ six layer collar, available in 3” or 4” and its removable snap liner system on both the coat and the pant.

This series is meant for firefighters who prefer the extra protection in the neck area and the simplicity of snaps for the liner system.

The INNO6000™ Series distinctive features are its four layer conventional collar system available in 3” or 4” for greater comfort and mobility. and its innovative zipper liner attachment system. This series is built for firefighters who prefer the traditional collar and easiness of the zipper attachment system.

PPE - Custom Bunker G

ear

Because different fire departments have different needs...

The choice is yours! Two Series, two Styles of INNOTEX® custom gear. Choose a Series, then choose a style.

Select a SERIES (5000 SERIES™ or 6000 SERIES™) and select a STYLE (CLASSIC™ or X-DESIGN™)

The INNO6000™ Series also features an innovative zipper liner attachment system.

This series is built for firefighters who prefer the traditional collar and easiness of the zipper attachment system.

5

The Classic Design™ is a proven and tested design made to fit all body types. It boasts a more traditional look while providing the firefighter with an unparalleled level of protection.

Integrated with the reach-flex

The added piece (on all three layers) of fabric in the underarm portion facilitates upper arm movement and minimizes rise both in the sleeve and coat when the arm is in an upward position.

Integrated with the pre-formed sleeves

A contoured arm cut is performed for additional ease of movement and comfort. Articulated elbows also increase the ability to move and provide a better fit.

PPE - Custom Bunker G

ear

The X-Design™ is our most recent design providing a shorter coat in the front reducing bulk and increasing the ease of forward bending movement as well as a longer coat in the back for added coverage when bending forward. Furthermore, the Enhanced Mobility Elbow™ facilitates arm bending movements. The X-Design™ provides a modern look without compromising safety.

Integrated with the FMA™The Forward Motion Arm™ is made up of a semi set-in sleeve system that minimizes restrictions of arm movements and coat rise.

Integrated with semi-bellowThe X-Design™ offers the option of angled semi-bellow pockets with center pleats (6.5” x 10”). The back pockets are deeper in the back than the front as the bottom of the pocket follows the cut of the coat hem.

6

Cairns® 1010 Traditional Composite Fire HelmetThe Cairns® 1010 traditional fire helmet offers a tough, through color, DuraGlas® fiberglass and high-temp composite resists cracking and chipping and provides a perfect combination of durability and performance in a lightweight, high-performance design. Traditional style with high-tech performance.

Cairns® 880 Traditional Thermoplastic Fire HelmetOffers a tough, high-temperature thermoplastic shell resistant to chipping and cracking, and a low-ride helmet design creates a low-profile for superior clearance and maneuverability. The 880’s smaller, lighter, low-profile shell allows for optimum clearance and maneuverability, yet it has a very stable, balanced ride.

Cairns® Invader 664 Composite Fire HelmetDurable and light structural fire helmet. The through-color DuraGlas® thermoplastic shell provides well-balanced construction for all-day comfort, while the exclusive shell-release system improves convenience. The front headband (6 3/8” to 8 3/8” inches) adjusts for proper SCBA mask fit and, along with the rear ratchet height adjustment, fits a wide variety of head sizes.

Cairns® 1044 Traditional Composite Fire HelmetThe Cairns® 1044 traditional fire helmet has the rough, durable matte finish desired by many firefighters. Constructed from a through-colored, Duraglas™ composite material that resists cracking and chipping. This is the perfect combination of durability and performance in a lightweight, high performance design.

PPE - Helm

ets

7

The Cairns® New Yorker™ the original hand-crafted leather helmet, meets current OSHA requirements and the demands of today’s firefighters. Retains and evolves the high quality and appearance that generations of firefighters have trusted and depended on since 1836. Each New Yorker helmet is individually crafted, shaped, stitched, and trimmed by hand, and still includes a durable leather shell designed to last for years.

Cairns® 660C Metro™ Composite Fire HelmetOffering unparalleled performance, the market leading Cairns® 660C Metro™ modern fire helmet is tough enough for structural, light enough for wildlands, and small enough for EMS and confined space applications. Rugged, non-corroding, and distortion resistant describe the features of the Cairns 660C Metro.

PPE - Helm

ets

Cairns® Rescue 360R Fire HelmetOur lowest-profile NFPA 1971 compliant helmet, offers excellent fire and impact protection. The brimless helmet features a Ultem thermoplastic shell and non-corroding, high-temperature, glass-filled polymer goggle hardware. The ultra high-temperature (TPR) edge trim won’t melt or drip. Nomex chin-strap with one-hand quick release buckle and postman slide allows quick, easy adjustment.

Cairns® 360 Structural Thermoplastic Fire HelmetThe multi-incident Cairns® 360 Structural modern fire helmet is one of the lightest structural helmets offered by Cairns. With its low profile, it is small enough for EMS and confined space.

8

PPE - Boots

14” BUNKER BOOT - COSMAS, VULCAN

Cosmas®, the next generation of fire boots, direct from Italy. NFPA-certifiedstructural and wildland firefighting boots, with a reputation as the best fitting, highest quality, high-performance brand of personal protective footwear available. CERTIFIED TO NFPA 1971, 2013 EDITION

9

PPE - BootsFeatures:

• Full-grain, water, flame, chemical, and cut resistant leather upper protects your foot and the internal bootie system.• Accordian-style flex point in the Achilles area allows the boot to flex where you do.• Fire-resistant Kevlar thread throughout the upper ensures durability under fire.• Anti-microbial Texon insole provides extra support.• Anti-microbial removable footbed with molded EVA heelcup and arch conforms to your foot providing comfort and support.• Molded heel counter cups heel and provides support.• Anatomically-shaped steel safety toe exceeds all relevant standards for protection.• Tapered microfiber heel slide for ease of donning and doffing. Stitching is offset to prevent premature wear and blisters.• Thermal insulating, open cell polyurethane foam padding is strategically placed throughout the upper for superior comfort and support.• Exclusive full-height bootie system consists of durable Cambrelle liner quilted to 6.0 oz. Nomex/Kevlar felt thermal barrier, laminated to Stedair moisture barrier by Stedfast, Inc., a leader in moisture management systems for the fire services industry. Your feet will stay dry with added thermal protection.

Technical Specifications:

• Soft, full-grain leather collar ensures comfortable calves.• Low-profile, triple-reinforced pull-on straps help get you in quickly, then

stay out of your way.• Mesh window for enhanced ventilation.• Thermoformed tibia guard protects your shins on the ladder.• ANKLEARMOR™ contoured ankle guards protect ankles from knocks and dings

– an industry first by Cosmas®.• Abrasion, chemical, and flame resistant vulcanized rubber toe cap extends-

boot life.• MIDSOLEARMOR™ combination composite puncture plate/ladder shank/mid-

sole, provides full puncture resistance coverage and thermal insulation for the bottom of the foot. This Cosmas® exclusive, patent pending construc-tion is stiff and supportive in the heel and arch, yet flexible in the forefoot, allowing your foot to flex naturally.

• High traction, electrically insulating, oil & heat resistant, vulcanized rubber outsole equipped with ergonomic HEELROLL™ and TOESPRING™promotes a natural walking motion. High profile ladder grips prevent slips.

10

Majestic’s fabrics are inherently protective, which allows for the ultimate in protection against radiant and intense heat without the risk of the protective nature being “washed out”. Our hoods offer more square inches of protection per style than any other hood on the market. This generous fit allows for less fabric stress and overall superior air circulation. When only the best will do, make it a Majestic!

The longer length (3 inches longer than NFPA requires) assures that this hood will stay tucked inside other required equipment. CERTIFICATION: NFPA 1971-2013, UL Certified. Meets or exceeds Cal/OSHA Standards.

The PAC II available in materials as shown: Nomex, PBI and Ultra C6.

Majestic’s Firefighter Hoods Majestc’s firefighter hoods are NFPA 1971-2013, UL Certified.

Majestic’s fire retardant hoods provide unparalleled comfort, protection, value and are MADE in the USA!

The PAC II offers more square inches of protection and is our most popular NFPA approved hood style.

The notched shoulder and longer length allows for a proper fit and added protection across the chest. The longer length (3 inches longer than NFPA

PPE - Bacalavas

PAC II - Nomex

PAC II - PBI

PAC II - Ultra C6

11

FireCraft Protector Structural Fire Glove A Level of Protection not available with any other current NFPA fire glove!

Available in Gauntlet and Knit Wristlet styles.Superior Palm Dexterity, Advanced Design and Fit, Exceptional Fingertip Dexterity, Longer Wear, Better Moisture and Viral ProtectionSuperior Heat Protection, Outstanding Puncture Resistance: 3X NFPA minimum!

Pro-Tech 8 Fusion

The Pro-Tech 8 Fusion structural firefighting glove was introduced in the Summer of 2010. It became an immediate sensation in the fire service by providing the superior dexterity, grip, flexibility, comfort and fit that Pro-Tech 8 users expect at a cost effective level.

Pro-Tech 8

The rugged Pro-Tech 8 Titan glove can satisfy any firefighter’s craving for dexterity, flexibility, grip, comfort and fit. Whether on a truck or an engine, Pro-Tech 8 Titan will efficiently handle every fire ground task you are faced with as well as basic motor vehicle extrication.

Pro-Tech 8 Titan K

Pro-Tech 8 Titan K is the kangaroo skin version of our original Titan model and is considered today’s gold standard in structural firefighting gloves. Kangaroo is essentially the most rugged of all leathers ounce for ounce while maintaining incredible softness and pliability. Available in short cuff and long cuff.

PPE - Gloves

12

PPE - Gloves

EXT Rescue® 4013

The best extrication glove has to be more than just an extrication glove; an adaptable, versatile, and dexterous glove that you can trust – that’s what first responders asked for. The answer is the EXT Rescue® 4013, with high-grip TP-X® reinforcement for increased durability, and advanced impact-protective technology.

EXT Rescue® 4012

If you have to make a decision between a safe glove and a well-fitting glove, you aren’t picking the right tool for the job. In critical moments, a bulky glove can lose seconds that you can’t afford to lose. Too many extrication gloves fail to deliver safety and comfort; the EXT Rescue® 4012 promises both.

EXT Rescue® 4011

Above all else, an extrication glove must be tough. The EXT Rescue® 4011 is the strongest, most dependable rescue safety glove available. Armed with HexArmor’s improved IR-X® Impact Exoskeleton™ and an ISEA Level 5 cut-resistant palm, reinforced with proprietary TP-X® technology for added durability and grip.

EXT Rescue® 4014

The EXT Rescue™ 4014 combines protection with our proprietary H2X™ waterproof/pathogen liner. TheH2X™ barrier meets OSHA Bloodborne Pathogens Standards and satisfiesASTM F1670/F1671 criteria for fluid-borne viral resistance. Unlike other gloves, the liner is sewn-in and won’t pull out when you remove them.

TM

13

RESCUE - TIC

FLIR Systems - Thermal Imaging Cameras

FLIR’s K-Series, a brand new line of extremely affordable fire service thermal imaging cameras (TICs). Designed for easier operation and better visibility, K-Series offers two powerful models: the K40 with a 240 × 180 thermal detector and the high resolution K50 with a 320 × 240 detector.

Both TICs provide the advantage of five imaging modes to optimize sensitivity for higher or lower temperature ranges, including search and rescue (SAR) and hotspot detection options. A bright 4” LCD clearly shows detailed images and colorized isotherms generated by the various dynamic ranges. And oversized buttons make it easy for gloved hands to quickly toggle through modes, press zoom, and access other functions

K-Series also features onboard image storage for up to 200 thermal JPEGs, which can be reviewed later from the camera’s archive or exported via USB for reports. Plus K-Series comes with FLIR’s exclusive warranty covering the full camera for two years and the detector for ten.

Other K-Series features:

•Temperature ranges up to 1200°F•Two 4-hour batteries & 2-bay charger•Lighter weight at less 2.5 lbs. including battery•Optional in-truck charger•FLIR Tools reporting software included•Withstands 2 meter drop•IP 67 rated

14

RESCUE - Extrication

SP 300E Spreader - With no hoses, no power unit and no setup time, this redesigned spreader gives you the ability to perform heroic rescues in the most challenging environments. Its “diamond” surface tips not only have excellent grip but are designed extremely flat to penetrate the narrowest gaps. The option to plug in and power, this tool is a perfect combination of strength, spreading distance and speed.

S 311E Cutter - The sidekick to the bigger S 700E makes it convenient as ever to get right to the business of being a superhero. Its sophisticated blade geometry means that it is fully optimized for vehicle extrication. Operate the tool using the power cord or switch over to battery mode for supreme portability. Rescue workers value its combination of brute cutting strength and large blade opening - and its low weight.

S 700E CutterHSS - The S 700E gives you the ability to perform heroic rescues without hoses, a power unit or limitations. It’s designed to take on current vehicleconstruction, as well as future wider and stronger car posts. Plus, it has 77% more cutting force where you need it than our previous top tool. And its intelligent cutter geometry reduces tool movement during operation.

Over 40 years ago HURST patented the first ever rescue tool system, and haven’t stopped innovating since then. HURST’S commitment to research and development, along with quality manufacturing, has resulted in a line of products known for their outstanding safety, durability and performance. Because of this commitment, Hurst Jaws of Life® rescue systems have been instrumental in saving hundreds of thousands of lives.

15

S 700 CutterHSS - The S 700 is not just strong; it is strong when you need it most. This tool attains its maximum cutting capability at a practical and usable 5-in. opening. With 67% more cutting force in the relevant work area, it’s ready for today and tomorrow’s new bigger and stronger steel. The S700 extrication capabilities include shipboard damage control, structural collapse, aircraft egress and more.

R 411E Ram - The R 411E is the first rescue ram without hoses. And while it is extremely compact, it offers enough strength to pack a powerful wallop. The claws at the two ends can be rotated 360º, enabling you to apply the ram effectively in almost any precarious situation.

SC 250E Tactical Combi - Lightweight and mobile, the SC 250E Tactical Combi will flex its muscles in all kinds of rescue situations. And because there’s no hose or power unit, you can get to the job of cutting, ripping and bending steel and saving lives fast. It’s a superior tactical combi for the hero on the fly.

SC 350E Combi - The SC 350E has all the power and flexibility to help you rip, cut or bend steel as needed. And it’s ideal for rescue situations like major accidents, off-road rescues or structural collapses. Not to mention, it’ll perform all these tasks without the need for hoses or a power unit. Quite simply, it’s the perfect combi tool – making you the perfect hero.

RESCUE - Extrication

16

RESCUE - Extrication

P 650 4G-ES - Our new P 650 4G-ES Quad power units allow rescuers to operate four tools at the same time or two tools at the same time. They can also power two tools in turbo mode by increasing the flow rate for faster tool operation. And they deliver all this action with a power unit that weighs about the same as a traditional unit. While similar to the P 650 4G-ES, this model offers an electric start.

R 430 Ram - Capable of carrying out the heaviest rescue operations, this ram is a first of its kind. Because of its three stages, it delivers a long working range that considerably reduces extrication time.It has a push capacity of 30 U.S. tons in the first stage and 14 U.S. tons in the second. Plus, heat-treated claws on the top and base provide grip on flat and angled surfaces. This tool lives up to the “ram” name.

SC 557 Combi - If you’re looking for power in your combination tool, then the SC 557 is the answer. It combines spreading and cutting in one tool without compromising performance in any way. If you’re entering a situation and don’t know what you’ll be required to do, then this is the tool you want in your hands

SP 510 Spreader - Because of its strength and its wide spreading distance, this tool has become a valuable asset during heavy-duty rescue operations on roads, railways and during search and recovery after natural disasters. It’s got multifunctional tips that don’t need to be changed and an ergonomic design that makes removing obstacles easier than ever.

17

JL-60C Ram - If the ram says Hurst, you know it’s gonna do the job right. And if the ram says JL-60C, you know it’s gonna perform beyond expectations. This ram reaches confined spaces with ease, makes large holes for extrication, displaces steering columns in no time flat, and drags unwieldy objects away from vehicles and victims. And that’s just for starters. Go ahead, push, pull, shore, stabilize and support your way around the rescue site.

MOC Combi - Two tools. One very important job. If you need a multifunctional tool that will cut and spread with maximum force for maximum results, the MOC Combi is the tool for you. Read these stats and you’ll agree: It features up to 57,998lbs. of spreading force, up to 19,108 lbs. of pulling force and an incredible 120,268 lbs. of cutting force. It is a force to be reckoned with on any job.

KL-32 Spreader - Steel’s worst nightmare.

The KL-32 Defender is the newest spreader in our lineup, and it doesn’t have a problem with getting up in steel’s face. This spreader features a generous 32.3-in. spreading distance and 22,000 lbs. of spreading force. Nothing will get in your way.

MOC Ultra CutterHSS -

The MOC-Ultra not only delivers a whopping 195,351 lbs. of cutting force but it does it weighing in at 47lbs. Perfect for vehicle rescue, structural collapse and large scale accidents such as train wrecks and aircraft emergencies.

RESCUE - Extrication

5000 PSI

18

RESCUE - Extrication

Passenger Side Airbag Safe - Automobile air bags can be unpredictable after an accident. In fact, they have been known to deploy as much as 20 minutes after an accident occurs. A safety hazard that doesn’t even have to exist. Simply attach our Passenger Side Airbag Safe to the airbag console (in less than a minute) and both the rescuer and victim are protected from late deployment. Includes a plastic carrying case (DS also available).

ART-Lite Vehicle Stabilization Kit

The ART-Lite Vehicle Stabilization Kit, designed for vertical, horizontal and angled support, is positive locking, lightweight, and highly portable. No air is required. The entire kit is stored in two lightweight carrying cases to facilitate convenient storage as well as fast and organized deployment at the scene.

JL-QG - Power up and power on.The new JL-QG takes power units to a whole new level. First, the JL-QG has a gasoline engine and has been developed to operate four tools at the same time or two tools with twice the speed when in turbo function! This feature is particularly valuable for operating rescue rams that call for a large volume of oil. Finally, it’s the power unit firefighters really want!

JL-SG-ES - It’s easy to see why so many firefighters love the new JL-SG/SE power unit series. For starters, the JL-SG has a gasoline engine and has been developed to operate two tools at the same time or one tool with twice the speed when in turbo function!. This feature is particularly valuable for operating rescue rams that call for a large volume of oil. the JL-SG-ES is similar to the JL-SG, but offers the added benefit of an electric start.

19

Rabbit Tool - This rabbit is a workhorse.8,000 lbs. of spreading power. A spreading distance of 4 in. Weighs only 11 lbs. The stats are impressive. But the Rabbit Tool impresses even more in person. Lightweight and extremely portable, Hurst’s line of specialty tools can be used with either a manual pump or a battery power unit. Sold by the piece or as a set, the specialty tools are stand-alone rescue systems.

Mini-lite Spreader - Part of the Mini-Lite tool series, the Mini-Lite Spreader works great in any confined space rescue. Able to spread up to 8 in. with a force of 7,300 lbs., it’s the power you need in extreme conditions. Best of all, it only weighs 10.5 lbs. Sold by the piece or as a set, the Mini-Lite tools are stand-alone rescue systems that can be used with either a manual pump or a battery power unit.

RESCUE - Specialty Tools

Mini-lite Cutter - Mini Light. Maxi Tough.Part of the Mini-Lite tool series, the Mini-Lite Cutter is a proven winner in any confined space rescue. With a cutter opening of 2 in. and a cutting force of up to 13,000 lbs., this 7-lb. cutter over delivers every time. Sold by the piece or as a set, the Mini-Lite tools are stand-alone rescue systems that can be used with either a manual pump or a battery power unit.

Mini-Cutter - With our Mini Cutter, confined spaces are about to be a lot less confined. With a cutting force of up to 17,000 lbs. and a cutter opening of 1.5 in. for precise operation in confined spaces, this 8-lb. tool is a beast on the scene. Lightweight and extremely porta-ble, Hurst’s line of specialty tools can be used with either a manual pump or a battery power unit. Sold by the piece or as a set, the spe-cialty tools are stand-alone rescue systems.

20

RESCUE - Specialty Tools

Mini-lite Ram 10”- It’s never tires, even if you do. Every rescuer needs the right tools to do the job. Enter the Mini-Lite Ram 10”. With a spreading force of up to 10,000 lbs. and a spreading distance of 9.5 in. to 14.5 in., this 5-lb. ram is the worker that never clocks out. Sold by the piece or as a set, the Mini-Lite tools are stand-alone rescue systems that can be used with either a manual pump or a battery power unit.

Mini-lite Ram 8”- 4 pounds. Unlimited possibilities. Don’t let its weight fool you. Although the Mini-Lite Ram 8” weighs only 4 lbs., it has a spreading force of up to 10,000 lbs. and a spreading distance of between 7.5 in. and 10.5 in. Take a minute to let those numbers sink in. Sold by the piece or as a set, the Mini-Lite tools are stand-alone rescue systems that can be used with either a manual pump or a battery power unit.

Mini-lite Hand Pump - Powered by elbow grease.

Our Mini-lite Hand Pump is the quick answer to any problem. Hand-operated, lightweight (9 lbs.) and compatible with all Hurst Mini-Lite tools and specialty tools, it’s a hard worker, but extremely easy to store.

SC 250 M - No gas. No long hoses. No batteries. No problems.

The SC 250 M is the combination tool that cuts, spreads and never takes no for an answer. Manually operated, it generatesmaximum power without gas, hoses or batteries. In addition, its head rotates 360° for optimum positioning, and it stores easily in small compartments.

21

Heavy rescue set (10 bar / 145 psi) – 2,927 kN/329 tons - With the heavy rescue set, you have 9 bags in 8 different sizes at your disposal, from little helpers to the big bag with up to 93 US tons of lifting power. With this set, you are ready for everything: traffic accidents with heavy trucks, collapsed buildings and even natural disasters. The heavy rescue set should be available at every major rescue operation.

Lifting bags (1 bar / 14.5 psi) Internal stabilizing straps keep the lifting bag from bulging and provide a flat contact area over the entire lifting height. Distinguished by an ideal pressure distribution, they can also lift thin-walled coachwork such as vans or small airplanes without damaging them. On soft or slippery surfaces, the clever anti-slip dimples on the extremely tough top and bottom sides provide a firm hold.

RSECUE - A

irbags/Vetter

S.Tec lifting bags (10 bar / 145 psi) - Vetter has further optimized the popular mini lifting bags to create a new generation of lifting bags:Vetter S.Tec lifting bags master every rescue operation with ease. Amazingly flat and uniquely powerful,its dynamic 10-bar lifting power makes it the most impressive lifting bag on the market. With an insertion height of only 0.98 inch, our S.Tec lifting bag fits in even the narrowest gaps and openings.

Wedge Lifting Bags (1 bar / 14.5 psi) The special shape of Vetter’s wedge lifting bags provides an optimum lift angle. Free trapped passengers quickly from overturned busses. Thanks to the wedge-shaped bags, the load is distributed uniformly over the entire lifting distance. With their ideal pressure distribution,the bags are perfectly suited to lift thin-walled coachwork such as the side walls of buses.

22

RESCUE - H

and ToolsParatech Hooligan Tool 30”

Setting the standard of excellence for Halligan type tools, the heavy duty Paratech Hooligan Tool has been designed to pry, pound, puncture, twist and cut open or remove all types of barriers.

Paratech Pry Axe

The pry axe is a lightweight, multi purpose tool designed to pry, enlarge openings, cut sheet metal and twist off locks and latches.

The Snagger Tool

The Snagger Tool (patent pending)TM is an innovative solution to problems every firefighter faces each and every day on the fireground. There are many challenges the Snagger can eliminate in simple and effective ways. The key is to have a lightweight and readily available tool for situations encountered on a daily basis.

Glas-Master - Glass Removal Tool

Glas-Master is a revolutionary new MANUALLY OPERATED, SELF SUPPORTED (No Electricity or Hydraulics necessary) glass removal tool that gives rescuers extra time to save lives during the GOLDEN HOUR.

23

RESCUE - H

and Tools

Round Shovel with 48” (1.2 m) Ultra-Lite Fiberglass Handle

Round Point Shovel w/ 48” Ultra-Lite Handle

Square Shovel with 48” (1.2 m) Ultra-Lite Fiberglass Handle

Square Point Shovel w/ 48” Ultra-Lite Handle

Pike Pole with Standard Hook - Akron Brass Pike Pole firefighting tools are made from meshed fiberglass for added strength and durability. Hooks assembled with heavy duty spring steel roll pins for durability and ease of maintenance. *Excludes I-B, standard USA hook. High visibility fiberglass for low visibility environments, lightweight, durable and easy to handle, diameter: 1 1/4, 4’, 6’ & 8’ lengths.

36’’ (.9 m) Roof Hook with Multipurpose Hook and ChiselThe Akron Brass Roof Hook is designed with the highest grade materials for a long lasting, durable, and maintenance-free tool. This all around fire fighting tool can be used for forced entry, prying open roof scuttles, sounding floors and roofs, venting windows, pulling ceiling, opening walls, and much more.

24

RESCUE - H

and ToolsPulaski Axe with 36’’ (.9 m) Hickory Handle

The Pulaski Axe is designed to cut through heavy brush and even small trees.• 36’’ American Hickory handle • 3.5 lb axe with mattock blade

Pick Head Axe with 36’’ (.9 m) Fiberglass Handle

6 lb Pick head axe with 36” Fiberglass handle.

6 lb Flat Head Axe with 36’’ (.9 m) Fiberglass Handle

All Akron Brass firefighting tools, including the 6 lb Flat head axe with 36” Fiberglass handle, are reliable and able to withstand the conditions firefighters encounter every day.

HRT ProIt bridges that gap between small pocket sized tools and large heavy ones. This unique tool can be used as an axe, hammer, spanner, pry bar, gas shut off, door stop, glass breaker, etc… There is also a heavy duty leather sheath option that includes a carrying strap. In the Akron Brass tradition this innovative tool is Made In USA with highest-grade materials and workmanship

25

Electric Series Positive Pressure Ventilation (PPV) Fans

The electric series positive pressure ventilation (PPV) fans feature come standard in the DS series frame but are available in the DST series frame as well as the Du-All frame that allows the fan to be tilted in 180°.

High Performance Circular Rescue Saws

The Pro-Saw/Cut-Off rescue saw can cut virtually any material; brick, concrete, wood, steel, etc. The perfect fire rescue saw. Ergonomically designed to work in confined spaces. Lightweight and powerful for safe and easy operation. Built tough to meet rescue personnel’s extreme demands.

16” Univent Pro-Saw Ventilation/ Fire and Rescue Chainsaw (PS-16)

Engineered specifically for the fire and rescue industry, these Fire and Rescue Chain Saws have a number of features that make them outstanding tools for the fire and rescue industry. Fire and Rescue Chain Saws should feature an advanced carbide tipped chain and have some sort of muffler guard.

DST Series Positive Pressure Ventilation(PPV) Fans

The DST series positive pressure ventilation (PPV) fans feature large flatproof pneumatic style wheels and tires, 35” extendable handle, high performance Honda motors, stainless steel frames, are tiltable from -10° to +20°, and are stand alone operational.

RESCUE - Saw

s & Ventilators

26

RESCUE - Blankets

Ready-Heat™ Infant Warming Cocoon - Award Winning Infant Warming Cocoon is designed for hypothermia prevention and temperature management for the most precious cargo. The cocoon has six warming panels to cover the vital organs and has two adjustable hook and loop fasteners for size adjustment. The cocoon has an attached hood and foam core for extra comfort and protection.

Ready-Heat™ 6-Panel Blanket - Ready-Heat™ Disposable Heated Blankets use our proprietary panel technology are used for slow continuous and consistent warming. They heat up gradually over a period of 15-30 minutes and after reaching peak temperature,remaining warm for 8 hours. They heat up gradually over a period of 15-20 minutes and after reaching a peak temperature of 104°F/40°C they will provide sufficient warmth and comfort for at least 8 hours.

Ready-Heat™ II Blankets

Ready-Heat™ II is designed more specifically as a first responder blanket to treat shock and hypothermia. It warms to a minimum 100°F/37.8°C in 10 minutes and will maintain that minimum heat for 6 hours. The blanket has a foam core and is lightweight and comfortable. This comfortable warming blanket is also finding many other medical, EMS and other applications where warmth is required.

Heats to 100°F/37.8°C in 8-10 minutes5 year shelf life34” x 48”Weight: 1.5 lbs.Individually wrapped in a translucent polybagContains 12 self-warming packsCivilian First Responder Blanket

27

Coloured Tarpaulins for Decontamination Lines

For the Vetter Decontamination Showers, PVC, 97.5 x 156 inch coloured tarpaulins for decontamination lines.

Vetter Decontamination Showers

Light and mobile, they fit on every emergency vehicle. The fronting basin prevents the spread of contaminated liquids. Clever magnetic fasteners for quick opening and closing of the shower curtain savesvaluable time in emergencies. Self-erecting, sets up in 40 seconds, easy to integrate in a decontamination line.

Hand Shower

The Vetter hand shower can be used in the Vetter Decontamination Shower and the Vetter Universal Tents.

Zytron® 500 Chemical Protection Suit

The Kappler® Zytron 500 is top of the class and the classic responder choice for hazmat and other demanding situations. It’s tough, built for mobility, and based on patented technology that created the first material to survive eight full hours against the ASTM F1001 Test Battery with no breakthrough.

HA

ZMAT &

CON

FINED

SPACE

28

HA

ZMAT &

CON

FINED

SPACE

Green Stuff® Absorbent Can absorb virtually ANY chemical except cyanide solutions, sodium hypochlorite (>8%), organic peroxides, and concentrated nitric acid (>40%). GREEN STUFF® can absorb any viscosity liquid from thick sludge and paint to light solvents and water. It absorbs synthetic motor oil, vegetable oils, turpentine and hydrofluoric acid and is also particularly effective in absorbing body fluids.

Vetter XL Leak Sealing Bag For large leaks, has a sealing area of 34 x 22 inches. Set includes Leak sealing bag type LD 110/60 S, XL, 1.5 bar (21.75 psi), with belt slots, single controller 1.5 bar (21.75 psi), fitting control, inflation hose 1.5 bar, blue (21.75 psi, 32 ft.),6 tension/extension belts with ratchet, 32 ft.,orange and blue,2 sealing plates 40 x 20 x 1.2 inch and acid protection cover, PVC, yellow.

Vetter Leak Sealing Bag SetsLeak sealing bag type LD 50/30 W, 1.5 bar (21.75 psi), with swivel eyes, sealing area of 20 x 12 inches. Inludes foot pump with safety valve 1.5 bar (21.75 psi), inflation hose 1.5 bar, 10 m, blue (21.75 psi, 32 ft.), acid protection cover, PVC, yellow 2 sealing plates 24 x 12 x 1.2 inches and 1 sealing plate 40 x 12 x 1.2 inches, 4 tension/extension belts with ratchet, 10 m (32 ft.) orange and blue, and transport case 32 x 24 x 9 inches.

Vetter Universal Tents

Vetter universal tents - Your pneumatic tent for all kinds of operations, developed especially for fire/rescue departments. These tents are designed to need especially little time and personnel for transport, setup and takedown. Immediately ready to use, extensive standard features, usable area 130 - 430 sq feet, ready for use in 3 minutes.

29

Poly-Tuff 800™ - Poly-Cord™ ring spun polyester warp yarns are combined with filament polyester filler yarns. Available either plain / uncoated “natural” white, or with our optional Ultra-Shield™ highperformance polyurethane coating applied to seal each and every fiber in the bundle, further improving the abrasion resistance, reducing moisture and chemical absorption. Applications: Attack and CAFS.

Hi-Tech 600™

100% synthetic reinforcement, totally encapsulated in a Nitrile Rubber compound utilizing a through-the-weave process.A medium duty rubber hose construction with good heat and chemical resistance.Applications: Attack, High Rise, and ForestryAvailable in 50 and 100 foot lengths

Dura-Built 800™ - Exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, resulting in superior “toughness”, abrasion resistance, cut resistance, tear strength and heat resistance when compared to competitive nylon, spun polyester or filament polyester warp constructions. Exclusive Ultra-Shield™ high performance polyurethane coating. Applications: Attack, High Rise and CAFS.

Attack-Force 1000™ Fire HosePoly-Cord™ continuous filament polyester warp yarns result in a tremendous improvement in abrasion and cut resistance. Superior “fit” between inner hose and outer jacket eliminates bunching, wrinkling and snagging of outer jacket. Unsurpassed kink resistance at low pressure, making it the perfect choice for low pressure nozzle applications. For Attack, High Rise, and CAFS.

FIRE SUPPRESSIO

N - H

ose

30

FIRE SUPPRESSIO

N - H

oseDixon Northine’s PVC Flexible Suction Hose -with advanced collar attachement. The collar is made from durable lightweight plastic, molded four inches wide. With the length of the shank on the coupling, inserted into the hose and the width of the collar combined, the chance of leakage is minimal when the hose is flexed while in use. Hose designed with engineered polymers and extruded aluminum parts to maximize strength, durability and performance.

DB-SS4-D™ Soft Suction HoseExclusive DURA-CORD® warp yarn offers superior toughness Rugged double jacket, EPDM rubber lined construction with the Dura-Bond™ vulcanized adhesion system to permanently bond the rubber lining to the fabric. Ultra-Shield™ high-performance polyurethane coating for improved abrasion and moisture resistance. Application: Soft Suction Hose.

Hi-Flow 400 LDH™

100% synthetic reinforcement, totally encapsulated in a Nitrile Rubber compound utilizing a through-the-weave process.A heavy duty rubber hose construction with good heat and chemical resistance. Applications: Supply and Relay.

Dura-Flow 800™ - DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, resulting in superior “toughness”, abrasion resistance, cut resistance, tear strength and heat resistance. Unique Ultra-Shield™ high-performance polyurethane coating seals each and every fiber in the bundle. The Dura-Thane™ polyurethane inner lining is extremely light weight and compact. Attack, High Rise, CAFS, and Potable Water.

31

Akron Zero Torque™ - The Zero Torque (ZT) nozzle is the first nozzle specifically designed with ergonomics, handling, control and reduced firefighter fatigue in mind. The ZT naturally keeps the nozzle out in front of the firefighter to allow for easier operation and provide better control. In addition the pistol grip and inlet swivel are positioned to eliminate the reaction force torque found in all conventional pistol grip designs.

Akron Assault™ Nozzles

Akron® Assault Nozzles combine quality stream performance at a variety of pressures with the simplicity of a fixed orifice. It is one of the most versatile and easy to use nozzles in today’s fire service. Quality stream performance at a variety of pressures, combined with a durable and simpledesign makes the Assault an unbeatable value.

Akron SaberJet™ Nozzle - The Single Shutoff SaberJet is a truly multi-purpose nozzle with the penetration of a solid bore tip and the advantages of a fog pattern. The Single Shutoff SaberJet has a unique three position handle and ball to give you solid bore, fog or closed positions. The nozzle is capable of operating efficiently at pressures as low as 50 psi to reduce firefighter fatigue, or up to 100 psi for maximum flow.

Akron Turbojet NozzlesThe Akron® adjustable gallonage Turbojet nozzle is unmatched in today’s fire service for its’ flexibility and flow control. The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns)with multiple flow settings for operator flow control. Use the Turbojet one time and it is easy to seewhy it’s the nozzle of choice by firefighters worldwide.

FIRE SUPPRESSIO

N - N

ozzles

32

FIRE SUPPRESSIO

N - M

onitorsMercury Quick Attack Monitor

The Mercury Monitors are the newest innovation in firefighting equipment. These monitors are smaller than any other ground portable firefighting monitor so they can be quickly set up and left unmanned at the fire scene to free up personnel.

DeckMaster Monitor 1250 GPM (4800 LPM)

The DeckMaster Monitor is a technologically advanced, electrically controlled deck monitor with automated elevating capability.The unique design of the DeckMaster Monitor allows electric elevation and positioning 26” above the base of the flange for operation over obstructions with the push of a switch.

StreamMaster Monitor 2000 GPM (7600 LPM)

The StreamMaster Monitor has uniquely designed, low profile 4”waterway with cast-in turning vanes. When coupled with an 80 psinozzle, the pump can operate at lower pressures for flows up to 2000 gpm (7600 lpm).

MercuryMaster 1000™ 1000 GPM (3800 LPM) The Mercury Monitors are the newest innovation in firefighting equipment. These monitors are smaller than any other portable ground monitor so they can be quickly set up and left unmanned at the fire scene to free upvaluable personnel. This monitor will save valuable time at the fire scene with quick deployment and conserves precious space on the fire truck with its compact size.

33

Chemguard 3% AFFF Foam ConcentrateSpecially formulated, synthetic, aqueous film forming foam concentrate. A vapor suppressing aqueous film is formed by the foam solution draining from the expanded foam blanket. It is intended for use at a proportioning rate of 3% (3 parts AFFF concentrate to 97 parts water) on Class B hydrocarbon type fuels such as gasoline, kerosene, diesel, etc.

Chemguard 3%x6% AR-AFFF

Chemguard 3% x 6% AR-AFFF C363 is a specially formulated, aqueous film forming free flowing viscous foam concentrate. It forms a vapor suppressing aqueous film on hydrocarbon type fuels or a polymeric membrane on polar solvent/water miscible type fuels.

Chemguard Class-A PlusChemguard Class “A” is a non-corrosive, non-toxic, biodegradable foam concentrate. When mixed with water in the correct proportion, it reduces the surface tension of the water, and produces foam, which allows the water to cling to vertical or horizontal surfaces without run off. This allows the water to absorb more heat and provides greater penetration into Class “A” fuels.

Chemguard XTRA High-X

Chemguard XTRA High Expansion Foam Concentrate is a synthetic based foaming agent suitable for use with either low, medium or high expansion foam generating equipment. Excellent wetting characteristics when used in combating Class “A” fuel type fires. Can be used with foam compatible dry chemical agents.

FIRE SUPPRESSIO

N - Foam

34

FIRE SUPPRESSIO

N - Foam

FireAde® 2000 Climate ControlThe newest generation in low temperature aqueous film forming foam. The capacity of FireAde® 2000 Climate Control to produce a stable, heat resistant and self-sealing blanket at -20°C is extraordinary. Formulated using Green Agent Technology™, contains NO hazardous materials.

FireAde® 2000 AR-AFFFEnvironmentally formulated, FireAde® 2000 AR-AFFF is the newest generation in Alcohol-Resistant Aqueous Film Forming Foam. FireAde® 2000 AR-AFFF produces a stable, heat resistant and self-sealing blanket; it will not clog, gum, or corrode foam systemsand equipment, providing an unparalleled performance. Contains ZERO hazardous materials.

FireAde® 2000The most complete and user friendly firefighting agent produced in the world. A “TRUE” class A and B foam, complies with NFPA 18/2006 wetting agent and UL 162 foam liquid concentrate. FireAde® 2000 offers the simplicity of using one product to extinguish multiple classifications of fire. Contains ZERO hazardous materials, environmentally formulated.

FireAde® 2000 Class AEnvironmentally formulated FireAde® 2000 Class A foam is the newest generation in Class A foam. Using Green Agent Technology™,environmentally friendly formula prevents environmental hazards. Contains ZERO hazardous materials in the formulation. The ability of FireAde® 2000 Class A foam to not only extinguish but sustain extinguishment once applied is superior to other Class A foams.

35

FIRE SUPPRESSIO

N - W

ildlandScotty Foam-Fast™ 3/4” Applicator

Simple and effective method of deploying Foam-Fast™ wetting agent onto a fire scene. To operate, open the inlet side of the mixing chamber, insert a Foam-Fast™ cartridge, reseal the inlet end cap, attach to a supply hose and spray Class A foam. The foam cartridge will dilute into the water flow and emerge through the Air Aspirating Nozzle.

Scotty Foam-Fast™ 1 1/2” Applicator

Simple and effective method of deploying Foam-Fast™ wetting agent onto a fire scene. To operate, open the inlet side of the mixing chamber, insert a Foam-Fast™ cartridge, reseal the inlet end cap, attach to a supply hose and spray Class A foam. The foam cartridge will dilute into the water flow and emerge through the Air Aspirating Nozzle.

Scotty “Through-the-Pump” Foam Eductor/MixerEducts foam concentrate into hose lines through a pump’s suction and discharge sides, also known as an “Around-The-Pump” system.Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI. Maximum operating pressure of 300 PSI. Includes an 18” Pressure Hose and a 48” Foam Pick-up Hose.

Scotty Forestry Foam Pump and Backpack

Includes Hand Pump, 5 gallon (19 L) Backpack, 4 foot Pick-up Hose a foam eductor and air-aspirating nozzle. The 4000F-BP eliminates the need to batch mix when Class A foam is required. Each time pump draws water, foam concentrate is educted at 1% into the pump chamber.

36

FIRE SUPPRESSIO

N - W

ildlandFire Broom

The Fire Broom is designed for direct attack on small brush or grass fires. The hardwood handle, stiff textured Palmyra fiber, and metal capare locked together to prevent loose handles and fiber fallout.

Fire Beater

The fire beater is designed to knock down, smother, and extinguish a small grasslands or wildlands fire.

Fedco “Smokechaser” Collapsible Indian Fire Pump Bag

An economical backpack fire pump made of strong polyester fabric encased in vinyl for durability. It can be easily collapsed and stowed when empty. All the seams are reinforced at all stress points. The brass hand pump is complete with combination nozzle and designed with positive shut-off.

Fedco Indian Poly Fire PumpsJust like our traditional Indian fire pumps, except the tank body is poly instead of steel. Just as durable as traditional models, this pump boasts: UV resistant poly tank will last for years of heavy use. Rust-free and sturdy.Brass pump will give years of bind free use. A pump you can count on in an emergency.Padded straps and lumbar support come on the 5 gallon version.

37

Breakthrough BT2 LED Right Angle Light -Advanced smoke cutting Breakthrough™ BT2 LED firefighter right angle light with a yellow exterior. Features FoxFury’s smoke piercing SMO-KUT technology. The 200 torch lumen BT2 offers a focused two degree beam, which makes it very effective at cutting through smoke. It has a more focused beam than the BT3, which allows it to shine further. Has extra thick body to better resist fire / heat.

Pelican StealthLite™ 2410 LED Flashlight

Same features as the StealthLite 2400 Flashlight but with the LED module that produces a true, bright collimated LED beam. The 2410 is corrosion proof, resistant to extreme temperatures, and submersible. It is powered by 4 AA alkaline cells (included). For hands-free operation, attach it to your hard hat with our optional helmet light holder.

Pelican Little Ed™ 3610 LED Flashlight -The 3610 is a right angle flashlight that uses our latest “Deep Mount” LED technology, delivering impressive lumens and lux performance. The stainless steel mounting clip allows for hands free applications. The body is made of tough ABS resin that’s corrosion proof and resistant to extreme temperatures. Powered by 4 AA alkaline cells (incl).

LIGH

TING

Command 20 Fire Helmet Light

72 torch lumen compact white LED firefighter helmet light offering focused and panoramic lighting. Runs on 4 AAs with a (flashing) rear red safety LED to help be seen on scene. Light used in structual firefighting, wildland firefighting, USAR (search and rescue), EMS.Fits most fire helmets.

38

LIGH

TING

Scene Light Mounting

Various mounting options are available for the Akron SceneStar LED Scene Lights. Including push-up poles, pull-up poles, manual mast, swivel base, air operated pole and tripod. Contact us for details.

AC SceneStar LED Scene Lights 20000 Lumen (Head only) 20,000 lumens, power: 220 watts, voltage: 120 or 240 VAC (must specify), current: 1.8 amps (at 120 VAC), .9 amps (at 240 VAC). Customized optics to provide spot and flood in one light, low ultraviolet light attracts less insects during nighttime operation. Available in all standard mounting configurations, incl. generator light kit and cord reel light.

9440 Remote Area Lighting SystemThe most innovative RALS unit to date, the 9440 moves fast to light up ravines, confined spaces, riverbanks... anyplace generator lights can’t go. Deployed, the mast extends 7 feet high, shining light over low obstructions encountered by traditional lantern style lights. With a 120 degree beam spread and up to 2400 lumens, the entire emergency area will have the light you need.

SideSlide C-Clamp Side Mounted Helmet Light -200 torch lumen flashlight with innovative helmet adaptor that allows use as a side mounted helmet light. Flashlight runs on either 2 CR123 batteries or one rechargeable 18650 battery. C-clamp design securely attaches to firefighter helmets and full brim style hard hats. Unique SideSlide locking mechanism holds flashlight securely in helmet adaptor.

39

MISCELLA

NEO

US

Crash Recovery System – Know what’s inside!

In case of serious accidents seconds may make the difference between life and death, full recovery or a lifelong handicap. Emergency rescue teams have to be able to act immediately. Within the automotive industry, technological developments evolve at a high pace. The application of advanced materials, reinforced constructions and safety systems offer optimal protection in case of an accident

The chances of getting away unharmed have increased considerably through these developments. But with these improvements, it has also become more difficult for rescue teams to extricate people from vehicles involved in a crash. This transforms safety components into new barriers to both passengers and rescue workers. Non-inflated Airbags, stored gas inflators and alternative propulsion systems with new characteristics are just examples of potential dangers. Localising and identifying these components during the rescue operation is therefore of prime importance. This is not an easy task, because these features differ with every make and model. Apart from that, new models and safety features are developed constantly. Very hard for rescue teams to keep up with!

40

MISCELLA

NEO

USUnifire HD-Pro Smoke Fluid

The perfect combination for the Unifirepowerful smoke machines. With Unifire’s high performance smoke fluid you will find that you get the thick, realistic smoke you desire but in a harmless and residue free form.

Unifire Z1500 High Perfomance Smoke Generating Machine

The Z-1500 is for users who need a lot of fog along with a lot of control. This machine features the Z-20 remote with easy to read LED readout to allow the user to closely control the duration, interval, and volume of fog produced. The remote’s LED screen clearly displays these parameters in seconds.

1510 Carry On Case

FAA maximum carry on size, retractable extension handle, strong polyurethane wheels with stainless steel bearings. Easy open double throw latches, open cell core with solid wall design - strong, light weightO-ring seal, Automatic pressure equalization valve. Pick N Pluck™ with convoluted lid foam.

Pelican 1550 Case

Watertight, crushproof, and dust proof. Easy open double throw latches, open cell core with solid wall design - strong, light weightO-ring seal. Automatic pressure equaliza-tion valve, comfortable rubber over-molded handle, stainless steel hardware and padlock protectors. Includes 2 level Pick N Pluck™ with convoluted lid foam.

41

FireTak® Collapsible Water TanksUtilizing a unique concept of an air filled collar, to provide a compact, lightweight, yet durable tank that can be quickly and easily deployed by one firefighter. The air collar is inflated within seconds using an S.C.B.A. cylinder. Over inflation is prevented using this method. Storage space is greatly reduced as our units are stored in a standard apparatus compartment.

MISCELLA

NEO

US

CitroSqueeze® Turnout, PPE, and Lifeline CleanerCitroSqueeze® is formulated to remove the harmful and stubborn hydrocarbons and soils resulting from fires and chemical spills, while maintaining the integrity of your turnout gear.It is a specially formulated cleaner that meets the NFPA 1851 Standard. CitroSqueeze® is biodegradable, has near-neutral pH levels, is environmentally safe and user-friendly.

Simulaids I.A.F.F. Rescue Randy

Rescue Randy was developed for lifelike adult or juvenile victim handling, transportation, and extrication training. These manikins can be safely used in situations too hazardous or uncomfortable for human volunteers. Features include: articulated joints, weight distribution according to human weight distribution chart.

RamAir Gear DryersHeated or ambient air dryers - safely and quickly dry all turnout gear and accessories including helmets, gloves, boots, face masks and SCBAs. The patented design use powerful fans that push air through gear from the inside out-effectively drying the hard to reach areas and vapor barriers in gear that are prone to mold and mildew if not dried properly.

42

APPA

RATUS

Rosenbauer is your true single source provider for over 145 years. Dating back to 1866, Rosenbauer has been the world leader in innovation for the fire service. Today, Rosenbauer, produces the most technologically advanced chassis from the Commander R-Series chassis to the mega size 6x6 Panther chassis for Airport Rescue Firefighting departments. Offering and building the most complete line of fire apparatus in the world today.

Rocky Mountain Phoenix is a proud Rosenbauer dealer; offering the most complete line of innovative apparatus available in the world today. From Custom and Commercial pumpers, Aerials, Rescues, Tankers, Wildland and Urban Interface to AARF’s. Rosenbauer offers a full line of body construction options and configurations, firefighting apparatus solutions to meet all your needs.

Need a Rental or Used Apparatus, Trailer or Other Vehicle?

We believe in meeting the needs of our customers. Just tell us what you need and we’ll do our best to equip you and your team with the right apparatus.

We have various rental vehicles on site that are ready to serve your short term needs, including used pumpers, trailers and more. Are you Looking to purchase a used apparatus? We may just have the vehicle you are looking for.Contact our Used/Rental Apparatus division for availability, rates and pricing.

43

SPECIALTY

Air Rider AR45 Rescue Hovercraft

The next evolution in hovercraft. AR45 Rescueprovides capability for emergency rescue tosafely meet the extreme transitional surfacechallenges of land, water and ice.

Standard and select features available.

Hydro Engineering Custom Hose Reels

No two cities are alike and neither are the Hydro ER Series Hose Reels. Each hose reel is built to meet your specific unique needs, we create the perfect solution for you.

Specialty Apparatus

Looking for a specific apparatus with specific features to meet your unique needs?

At Rocky Mountain Phoenix, we work with a variety of innovative specialty vehicle and appliance manufacturers, if you can dream it, we can probably build it!

We work with quality manufacturer’s such as TurtleTop, Renegade Specialty Vehicles, Hydro Engineering, Air Rider Hovercrafts and more.

We work with you to find the apparatus or appliance that will meet your needs. Including Command Units, Shuttle Bus and Coach, Oil Fracking Equipment such as hose reels and more.

Fire Equipment Sales Glenn Jacques Sales Manager - Equipment and Industrial 403-506-5297 Robert Bouffard Alberta - Northern Sales 780-995-1780 Colin Carswell Alberta - Central Sales 403-598-4314 Curt Emde Alberta - Southern / BC East Kootenays Sales 403-598-4733 Shawn Dick BC Northern Sales & Yukon Sales 250-613-3194 Brian Hoeght BC Lower Mainland / Fraser Canyon Sales 778-908-2330 Chuck Termeer Manitoba Sales / SE Saskatchewan 204-871-6606 Jim Norbury Saskatchewan Sales 306-530-3649 Mike Tisdelle Vancouver Island Sales 250-686-6491

Inside Sales/Support Matthew Sutton Sales Specialist 403-314-6849 Jamey Pelletier Sales Specialist 604-557-2899 Andrew Smalbrugge Sales Specialist 604-557-2892 Kandie Bernat Sales Specialist 604-557-2893

Fire Apparatus Sales/Support Carey Feduniw Sales Manager - New Apparatus 403-314-6842 Darren Daviduck BC / Yukon New Apparatus Sales 250-870-0678 Jay Elliott New Apparatus Sales 403-314-6844 Mike Feduniw New Apparatus Sales 403-314-6843 David Spencer New Apparatus Sales Support 403-314-6837 Ray Bonin Apparatus Parts Support 403-314-6838

Specialty Apparatus Sales, Rentals & Used Howard Bradley Rental & Used Apparatus / Equipment 403-302-8495 Clint Stevens Specialty Vehicles Sales 403-314-6832

Shop & Mobile Service Rod Bryant Director of Service 403-350-6774 Gale Myers Manager Mobile Service (Master EVT) 403-302-8329

East of the Rockies1-800-494-4210

West of the Rockies 1-888-815-0500

www.facebook.com/rockymountainphoenix.com