Upload
trinhlien
View
217
Download
0
Embed Size (px)
Citation preview
Since 1992 partners of the paper industry worldwide Innovation and competence Development, manufacturing and marketing
emcoNDT 100 Hygroexpansivity Tester (Fenchel)
M e t h o d for determination of d y n a m i c s the Hygroexpansivity of paper in length- and cross direction
Art.-Nr.: 813.610-S
0,0
0,5
1,0
1,5
2,0
1 5 9 13 17 21
%
sec.
Developing of expansion
Contactless measurement value logging with lasor sensor eliminates peripheral influences as friction or counterchecks of mechanical components
Variable test time 1 - 999 Sec.
Digital accuracy of measurement 0,01 %
Automatic zero standard and compensation of clamping errors.
Integrated climate sensor (optional)
Developing of measurement is charted in real-time
The state of calibration can tested with included calibrating standards
RS 232 interface for central management of result by dint of PC.
emco Elektronische Meß- u. Steuerungstechnik GmbH, Mommsenstraße 2, D-04329 Leipzig, Germany Tel.: +49 -341- 271 46 0, Fax: +49 -341- 271 46 14, E-Mail: [email protected], Internet: http://www.emco-Leipzig.de
05-01
Measurement engineering links together
emcoNDT
emco Elektronische Meß- u. Steuerungstechnik GmbH, Mommsenstraße 2, D-04329 Leipzig, Germany Tel.: +49 -341- 271 46 0, Fax: +49 -341- 271 46 14, E-Mail: [email protected], Internet: http://www.emco-Leipzig.de
05-01
Construction and operating mode
Hygroexpansivity tester (acc. Fenchel) are established many years. The new emcoNDT measurement is automated and provided with electronic control. In comparison to the established gauges are achieved Gerät substantial advantages for measuring value logging, the measuring- cycle as well as for operating. Usually is needed a strip of 15 mm width to determination the hygroexpansivity in chross direction. Alternative the emcoNDT can construct for a strip width of 50 mm. The gauge is controlled by menu. The measurement take place automatically. Because the state of extension and basic length of paper affected by moisture content, that is depend on room climate, it is possible the climate to comprehend with each test (optional).
Chain of measurement
After clamping the sample and hitting the start-button measurement executes automatically in following steps: Unlock the upper clamp. Compensation of zero point. Water tank lifting. Time measurement is running. Digital and graphical indication of actual extension as well as
residual measuring time. At the end of measurement the water tank is lowered.
Technical data
Sample dimension: Time: Dimension NDT:
(WxHxL) Dimension control unit:
(WxHxL) Weight: Power supply: Air pressure:
15 x 100 mm (50 x 100 mm optional)
1 - 999 sec
200 x 650 x 300 mm 390 x 130 x 210 mm
15 kg
110...230 V 50/ 60 Hz
6 bar