VSHINE™ High Powered Type Flood Lamps Technical Data

The VSHINE™ FACADE and area luminaire provides uncompromising optical performance and outstanding versatility for a wide array of LED area lighting and LED roadway lighting applications. The VSHINE™ FACADE delivers illumination and uniformity to meet a variety of worldwide standards for monuments, memorials, towers, building areas and trees.

General Information Construction Die-cast aluminum bottom and top sections are mechanically joined to the extruded heat sink mid-section. The advanced heat sink extrusion allows for a variety of lengths to suit any luminaire wattage we manufacture. Our unique construction allows for passive cooling and natural cleaning of the extruded heat sink, ensuring thermal management control with reliable operation at 45-50°C high ambient conditions. Stainless steel fasteners and hinging base section allow access to electrical components for installation and maintenance. Optics Full Cut Type III VSHINE™ optics are precisely designed to shape the distribution thereby maximizing efficiency and application spacing. VSHINE™ optics are engineered from PMMA thus maximizing light transmission. Longitudinal and overall uniformity has been accurately developed to meet global lighting standards.

LEDs A calculated L70 value of 250,000 + hours based on in-situ testing, LM-79 data and LM-80 data from the LED manufacturer. Electrical LED drivers mount to die-cast aluminum back casting for optimal heat sinking and operation efficiency. Standard driver input 90-528 Volts AC with an IP 67 rating and with diming function available to optimize lighting control. DC powered drivers are also available. Mounting The VSHINE™ high powered Flood lights come complete with wall or pole mounting bracket which incorporates a full adjustable tilt angle. Easy to adjust and position to reduce installation time. Finish Cast components finished in polyester powder coat paint. Standard colors include grey and white with other RAL colors available upon request.

Standard Model Details

Model

Performance

(5500K -

8000K)

Premium

(4000K -

5500K)

Standard

(3500K -

5000K)

Consumed

PowerOptic B U G

IP

RatingWarranty

VFL-L120-525-XPG-65-D3-PG-V1 20955 19589 18381 201.48 Type II 3 0 2 IP66 5-10 Yrs

VFL-L160-525-XPG-65-D3-PG-V1 26183 24477 22968 268.64 Type II 3 2 3 IP66 5-10 Yrs

VFL-L240-525-XPG-65-D3-PG-V1 36137 33782 31699 402.96 Type II 3 2 3 IP66 5-10 Yrs

Drive Current = 525ma

Photometric Detail

VFL-240-525 – 30 Ft Setback

Model

Performance

(5500K -

8000K)

Premium

(4000K -

5500K)

Standard

(3500K -

5000K)

Consumed

PowerOptic B U G

IP

RatingWarranty

VFL-L120-350-XPG-65-D3-PG-V1 14600 13655 12814 127.89 Type II 3 0 2 IP66 5-10 Yrs

VFL-L160-350-XPG-65-D3-PG-V1 18243 17062 16012 170.52 Type II 3 2 3 IP66 5-10 Yrs

VFL-L240-350-XPG-65-D3-PG-V1 25178 23548 22099 255.78 Type II 3 2 3 IP66 5-10 Yrs

Drive Current = 350ma

LCS TABLE

BUG RATING B4 - U0 - G3

FORWARD LIGHT LUMENS LUMENS %

LOW(0-30): 5,340.7 14.7%

MEDIUM(30-60): 15,570.0 43%

HIGH(60-80): 4,117.1 11.4%

VERY HIGH(80-90): 177.6 0.5%

BACK LIGHT

LOW(0-30): 2,891.6 8%

MEDIUM(30-60): 5,750.9 15.9%

HIGH(60-80): 2,256.6 6.2%

VERY HIGH(80-90): 130.4 0.4%

UPLIGHT

LOW(90-100): 0 0%

HIGH(100-180): 0 0%

TRAPPED LIGHT: 0 0%

Physical Characteristics

(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (Kg)

VFL-L120-350 22.91 582 14.96 380 24.21 615 21.42 544 12.40 315 N/A N/A 4.80 122 Bracket Bracket 31.08 14KG

VFL-L160-350 22.91 582 14.96 380 24.21 615 21.42 544 12.40 315 N/A N/A 4.80 122 Bracket Bracket 35.52 16KG

VFL-L240-350 31.10 790 14.96 380 24.21 615 21.42 544 12.40 315 N/A N/A 4.80 122 Bracket Bracket 44.40 20KG

E F G Mount WeightModel No.

A B C D

FL-SB Standard bracket

* Project specific mounting options available

Mounting Options

FLOOD HIGH POWERED

Installation Details

1. Advanced Optic Type II distribution - Type II Roadway with consistent longitudinal and overall

uniformity optimizing spacing between poles. BUG rating, with IDA Dark Sky compliance.

2. Electrical field wiring gland.

3. LED driver housing and electrical components.

4. Advanced heat sink for thermal LED temperature dumping.

5. IP67 LED Driver- UL Listed LED Driver mounted inside the bottom section with tool-less entry (see

LED Driver details below for further details and voltage options available).

6. Field wiring termination.

7. Manufacturing wiring for the driver and LEDs.

8. Adjustable pivot point and tilt angle locator.

9. Locking nut to lock lamp into required position.

10. Locator pin.

eSHINE Product Family Model Numbers

VLED-Product

Family

No. LED's Driver

type

LED

type

Optic Distribution Finish Voltage type

VS- Street L10=10 LEDs 350ma XPE 65⁰ D1=Type IPG=

Metallic

V1=90 - 305

VAC

VA- Area L20=20 LEDs 525ma XPG 85⁰ D2=Type II PW= White V2=480 VAC

VC - Canopy L30=30 LEDs 700ma C535A V=variable D3=Type III PB=Bronze V3- Dimming

VB - Bol lard L40=40 LEDs 1050ma C503D D4=Type IV PB=black V4=12 VDC

VSH - Shelter L50=50 LEDs D=Direct D5=Type V V5= 24 VDC

VR - Reflect L60= 60 LEDs

VH - High BAY L70= 70 LEDsMounting options- See mounting details below

VLB - Low Bay L80= 80LEDsOther body Colors available upon request

VF - Façade L100- 100 LEDsOrdering information- Example. VS-L40-350-XPG-65-D2-PG-V1

VFL - Flood L120=120 LED's

VU - Up L160=160 LED's

L200=200 LED's

L240=240 LED's

MC=Multi Chip

LEDs

Additional Information

Warranty 5 years LEDs

5 Years Driver

10 Years Mold/extrusion

Lamp attachments Pole, wall, soffit, bracket and hanging rod mounting options available

Finishes RAL colors to 50 microns

Extrusions & molds 6063 Aluminum

Optics Poly-Meth-methyl-acrylic-Optical Grade PMMA PC

Average transmittance in visible spectrum 400nm~700nm> 90%

Advanced Uniformity design with the Optical performance distributing light accurately maximizing spacing between poles

LED Driver • High Efficiency (Up to 92%)

• Active Power Factor Correction (0.99 Typical)

• Constant Current Output

• Lightning Protection

• All-Round Protection: OVP, SCP, OTP

• Waterproof (IP67)

• Comply With UL8750 & EN61347 Safety Regulations

• Comply With ANSI/IEEE C62.41, Class A Operation

• 90-528 VAC single phase

• 480 VAC SWER 2 hot wire earth return

• 12 and 24 VDC drivers available for most Wattages

LEDs The XLamp XP-G LED is capable of up to 493 lumens at 92 lumens per watt when driven at 1.5 A. XLamp XP-G LEDs set the new standard for light output and efficacy in single-die LEDs, extending the leadership of Cree’s lighting-Optic XLamp XP family and giving lighting designers a wide range of price and performance options that all share a common footprint. Features • ANSI-compatible chromaticity bins • RoHS and REACH-compliant • UL-recognized component • Unlimited floor life at <= 30 degrees C/85% RH • Electrically-isolated thermal path