iPad Pro 12.9 Keyboard Case(A1876/A2014/A1895)

(Not fit 2017/2015 model)

Any question, please contact us via the above email address (not via Amazon).

User Manual

Load/Upload your iPad

Congratulations! Thank you for choosing our iPad keyboard case. Before using the keyboard case, users should read this manual to familiarize themselves with the wireless functions of your iPad.

!

Get Start

Email: support@earto.netWebsite: www.earto.com

(Not via Amazon)

Contact us:

Specifica�ons

Operating distance:

Working voltage:

Charging Current:

<10 meter

Continuous working tume: <2.5 hours(ON) /350 hours (OFF)

Without backlit:80 hours

Lithium battery capaccity: 450 mAh

Charging time: < 3hours

Lithium battery life: 3 years

Key life: > 5 million strokesOperating temperature: -10±50°C

3.3 ~ 4.2V

225 mA

Standby time: 180 days

Modulation System:

Working Current:

GFSK

30~100 mA

How to get the keyboard sync with iPad

Please do not unfold the case more than 135 degree angle, or else the spiale easyto be broken.

WARNING:

3 4

21

Open your BT signal, keep the BT showing “on” search state .

Power on keyboard, then presskeys,the keybard will stay on searching state within 3 minutes .

On the setting menu choose ipad. Keyboard, BT signal light go out, connection is successful.

Open your iPad, Select“ setting -universal-bluetooth . ”

BT ipad. Keyboard

Keyboard Overview

Controls the speed of the breathing lamp.

Control breathing lamp switch7.

6. Some special short characters

5. + other keys can realise some uncommon special characters

4. To type the character in grey area, hold shift and press the desired character.

3. Fn + PgUp = Home Fn + PgDn = End

2. Switch backlight color

1. Turn on/off or adjust the backlit. Press once to turn on the backlit.Press again will increase the brightness. The third time will maximizethe brightnsee. And the fourth time will turn off the backlit.

Special key instructions

Cut : + + ++ +Paste : Select All : Copy:

+

+

Troubleshoo�ng

lndicators lnstruc�ons

If the keyboard fails to work, please check if:

1.The battery is too low. Fully charge the keyboard (no less than 2 hours) for the first time to extend battery life.2.You have entered the prompted code correctly.3.The keyboard is located within 33 feet from your iPad.4.You have enabled BT on your iPad.

(For iPad Pro 12.9”)① White LED: Caps lock lndicator② Green LED: Stay on after fully charged③ Red LED: Blik at low-battery,keep bright whlie charging④ Blue LED: Flashing in wireless pairing state

I can’t get my BT connected:Step 1: Move ON/OFF switch to ON.Step 2: Press “fn + C” ( Note: Paring indicator light will begin blinking)Step 3: Toggle BT On in the Settings app on your iPad.Step 4: Tap “ipad. Keyboard” under “MY DEVICES” in the Settings.For the coming use, you just need to open the keyboard and tablet power, press any key on the keyboard. Then it will automatically connect. ( No need to click “fn + C” and pair it. Otherwise, it will show not connect.)

I can’t get my BT connected:Step 1: Power off the keyboard.Step 2: Delete all the BT connection records in your iPad setting.Step 3: Power on the keyboard and connect again. (Repeat the original connection step)If the above steps do not solve your problem, please contact us via our after-sales email address (support@earto.net)

Cautions 1:When the battery is below 20%, BT will be unstable. And it will turn to sleep if you don't press the keyboard beyond 10 minutes, at this situation, you just need to press any key on the keyboard to wake up the BT get it to work again. (No need to re-connect)

Cautions 2:The angle of use is only supported within 135 degrees. If it is more than 135 degrees, the hingle of the keyboard will burst and cause it to not work properly.

Cau�on

With one year warranty, we will help you solve the problem. Please do not worry. If you have problems with keyboard

usage or improvement suggestions, please do not hesitate to contact us by email (not via Amazon). Thank you!!