ONE SOURCE. ONE SOLUTION. TOWERS

www.lambtonconveyor.com

TOWERSSPECIFICATIONS

ELEVATOR SUPPORTLambton offers you HUNDREDS of standard models of towers to meet your specific and unique needs.

STANDARD FEATURES• Designed in accordance with the EIA/TIA & ASCE standards• Designed using the latest in finite element analysis software by RISA Technologies• Constructed of ASTM A-529 Grade 50 mill certified structural steel angle• ASTM A-325 galvanized bolts, nuts, and locking devices used for all structural connections• Steel is “hot dipped” galvanized in accordance with ASTM A-123 and ASTM A-153 standards• Corothane I Mio-Aluminum coating available• Bare steel with no coating• Foundation designs available

SUPPORT TOWER

  Specialty Structures & Accessories 

 

  1  Allstate Tower Inc.         P.O. Box 25          Henderson, KY.          1‐(270)‐830‐8512 ext.334       www.allstatetower.com Copyright © 2011 Allstate Tower, Inc. All rights reserved 

Diamond Brace

 

Elevator Support Structures  

  

 Our standard elevator support structures have been completely designed using the latest 

state of the art finite element analysis software to ensure structural integrity and to gain maximum capacity. This allows us to offer very cost effective designs to the market. These designs are available in light, medium, heavy, and extra heavy capacities to cover a wide range of customers needs including catwalk, walk‐thru truss, stair supports and covers 16” through 48” triple row pulley systems. The allowable loading for the various lines of structures is listed in the detailed design information charts.  

 We  have  taken  great  care  in  the  details  of  the  product  to minimize  the  total  number  of 

different part variations so as to improve quality, cost effectiveness, and installation time. These designs are constructed of high quality mill certified structural steel and provided  in an all bolt together  configuration.  This  maximizes  durability  while  minimizing  shipping  costs  for  both domestic and international requirements. 

Standard Features 

Designed in accordance with the EIA/TIA & ASCE standards 

Designed using the latest in finite element analysis software by RISA Technologies 

Constructed of ASTM A‐529 Grade 50 mill certified structural steel angle 

ASTM A‐325 galvanized bolts, nuts, and locking devices used for all structural connections 

Steel is “hot dipped” galvanized in accordance with ASTM A‐123 and ASTM A‐153 standards 

Corothane I Mio‐Aluminum coating available 

Bare steel with no coating 

Foundation designs available 

Optional Custom Features Available 

Can be designed for any wind speed or ice requirement 

Box tubing, pipe or solid round legs available 

Tower mounted head service platforms 

Tower mounted distributor platforms 

Internal service platforms 

Tower mounted climbing ladder systems 

Catwalks & Walk‐Thru Truss systems 

Switchback & Wrap around stair systems 

Access bracing at customer specified locations available 

Top

20'

Opt

ion

Top

40'

Opt

ion

Full

180'

Bas

e S

truct

ure

Dia

mon

d B

raci

ng P

rovi

ded

For A

ll H

eigh

t Opt

ions

SPECIFICATIONS

One Source. One Solution.

SPECIFICATIONS

TOWER STAIRSWrap Around

contact us...

Switchback

  Specialty Structures & Accessories 

 

  1  Allstate Tower Inc.         P.O. Box 25          Henderson, KY.          1‐(270)‐830‐8512 ext.334       www.allstatetower.com Copyright © 2011 Allstate Tower, Inc. All rights reserved 

Diamond Brace

 

Elevator Support Structures  

  

 Our standard elevator support structures have been completely designed using the latest 

state of the art finite element analysis software to ensure structural integrity and to gain maximum capacity. This allows us to offer very cost effective designs to the market. These designs are available in light, medium, heavy, and extra heavy capacities to cover a wide range of customers needs including catwalk, walk‐thru truss, stair supports and covers 16” through 48” triple row pulley systems. The allowable loading for the various lines of structures is listed in the detailed design information charts.  

 We  have  taken  great  care  in  the  details  of  the  product  to minimize  the  total  number  of 

different part variations so as to improve quality, cost effectiveness, and installation time. These designs are constructed of high quality mill certified structural steel and provided  in an all bolt together  configuration.  This  maximizes  durability  while  minimizing  shipping  costs  for  both domestic and international requirements. 

Standard Features 

Designed in accordance with the EIA/TIA & ASCE standards 

Designed using the latest in finite element analysis software by RISA Technologies 

Constructed of ASTM A‐529 Grade 50 mill certified structural steel angle 

ASTM A‐325 galvanized bolts, nuts, and locking devices used for all structural connections 

Steel is “hot dipped” galvanized in accordance with ASTM A‐123 and ASTM A‐153 standards 

Corothane I Mio‐Aluminum coating available 

Bare steel with no coating 

Foundation designs available 

Optional Custom Features Available 

Can be designed for any wind speed or ice requirement 

Box tubing, pipe or solid round legs available 

Tower mounted head service platforms 

Tower mounted distributor platforms 

Internal service platforms 

Tower mounted climbing ladder systems 

Catwalks & Walk‐Thru Truss systems 

Switchback & Wrap around stair systems 

Access bracing at customer specified locations available 

Top

20'

Opt

ion

Top

40'

Opt

ion

Full

180'

Bas

e S

truct

ure

Dia

mon

d B

raci

ng P

rovi

ded

For A

ll H

eigh

t Opt

ions

OPTIONAL CUSTOMER FEATURES •Can be designed for any wind speed or ice requirement•Box tubing, pipe, or solid round legs available•Tower mounted head service platforms•Tower mounted distributor platforms•Internal service platforms•Tower Mounted climbing ladder systems•Catwalks & Walk-Thru Truss systems•Switchback & Wrap around stair systems•Access bracing at customer specified locations available

For details go on www.lambtonconveyor.com or contact Lambton headquarters at +1 (519) 627 8228

Light Series : Supports Elevator, Head Service Platform and Ladder System

Base Design # 180' 160' 140' 120' 100' 80' 60'16 6 n/a n/a n/a 90mph / 50mph 1"ice A-16P-06-L120-90 8.9 6.8 5.1 3.624 8 n/a n/a n/a 90mph / 50mph 1"ice A-24P-08-L180-90 21.2 17.2 14.1 11.4 9.0 6.8 4.730 8 n/a n/a n/a 90mph / 50mph 1"ice A-30P-08-L180-90 21.2 17.2 14.1 11.4 9.0 6.8 4.736 10 n/a n/a n/a 90mph / 50mph 1"ice A-36P-10-L180-90 24.6 20.2 16.6 13.1 10.5 7.9 5.742 10 n/a n/a n/a 90mph / 50mph 1"ice A-42P-10-L180-90 24.6 20.2 16.6 13.1 10.5 7.9 5.748 12 n/a n/a n/a 90mph / 50mph 1"ice A-48P-12-L180-90 29.2 24.8 20.5 16.5 13.2 10.3

48 - 2R 12 n/a n/a n/a 90mph / 50mph 1"ice A-48P2R-12-L180-90 29.2 24.8 20.5 16.5 13.2 10.348 - 3R 14 n/a n/a n/a 90mph / 50mph 1"ice A-48P3R-14-L180-90 33.8 28.4 23.9 19.3 15.4 12.2

Medium Series : Supports Light Series Loading + Distributor and Spouting

Base Design # 180' 160' 140' 120' 100' 80' 60'16 6 6" x 6 Hole 40 n/a 90mph / 50mph 1"ice A-16P-06-M120-90 9.4 7.3 5.6 3.824 8 8" x 6 Hole 60 n/a 90mph / 50mph 1"ice A-24P-08-M180-90 22.7 18.5 14.6 11.5 9.1 6.9 4.730 8 10" x 8 Hole 60 n/a 90mph / 50mph 1"ice A-30P-08-M180-90 24.6 19.9 15.7 12.6 9.9 7.5 5.336 10 12" x 8 Hole 80 n/a 90mph / 50mph 1"ice A-36P-10-M180-90 28.3 23.4 19.0 15.4 11.9 9.0 6.142 10 12" x 8 Hole 80 n/a 90mph / 50mph 1"ice A-42P-10-M180-90 28.3 23.4 19.0 15.4 11.9 9.0 6.148 12 14" x 8 Hole 80 n/a 90mph / 50mph 1"ice A-48P-12-M180-90 33.3 27.8 22.7 18.5 14.5 11.2

48 - 2R 12 14" x 8 Hole 80 n/a 90mph / 50mph 1"ice A-48P2R-12-M180-90 33.3 27.8 22.7 18.5 14.5 11.248 - 3R 14 14" x 8 Hole 80 n/a 90mph / 50mph 1"ice A-48P3R-14-M180-90 35.8 29.3 24.5 20.0 16.1 12.5

Heavy Series : Supports Medium Series Loading + Catwalk / Walk Thru Truss Loading

Base Design # 180' 160' 140' 120' 100' 80' 60'16 6 6" x 6 Hole 40 Top - 22.5' 90mph / 50mph 1"ice A-16P-06-H120-90 10.0 7.8 5.9 4.024 8 8" x 6 Hole 60 Top - 22.5' 90mph / 50mph 1"ice A-24P-08-H180-90 23.5 19.4 15.0 11.8 9.4 7.1 5.330 8 10" x 8 Hole 60 Top - 22.5' 90mph / 50mph 1"ice A-30P-08-H180-90 27.1 22.3 17.8 14.1 10.8 8.2 5.836 10 12" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-36P-10-H180-90 31.0 25.4 20.5 16.6 13.0 10.1 7.442 10 12" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-42P-10-H180-90 32.9 26.9 21.6 17.3 13.3 10.2 7.448 12 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P-12-H180-90 37.6 31.0 25.2 20.4 16.0 12.4

48 - 2R 12 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P2R-12-H180-90 38.9 32.4 26.5 21.7 17.3 12.848 - 3R 14 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P3R-14-H180-90 51.6 43.5 36.4 29.8 23.8 18.6

Extra Heavy Series : Supports Heavy Series Loading + Switchback or Wrap Around Stair System

Base Design # 180' 160' 140' 120' 100' 80' 60'16 6 6" x 6 Hole 40 Top - 22.5' 90mph / 50mph 1"ice24 8 8" x 6 Hole 60 Top - 22.5' 90mph / 50mph 1"ice30 8 10" x 8 Hole 60 Top - 22.5' 90mph / 50mph 1"ice36 10 12" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-36P-10-EEH180-90 40.1 34.0 28.1 22.4 17.5 13.1 9.342 10 12" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-42P-10-EEH180-90 41.9 35.4 29.2 23.3 18.4 14.0 10.348 12 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P-12-EH180-90 46.4 39.4 32.5 26.1 20.8 15.5

48 - 2R 12 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P2R-12-EH180-90 48.2 40.6 33.9 27.1 21.5 16.548 - 3R 14 14" x 8 Hole 80 Top - 22.5' 90mph / 50mph 1"ice A-48P3R-14-EH180-90 62.3 52.4 44.1 36.4 28.3 21.5

Light Series - Available Heights / Weights (Kips)

Pulley Size (in.)

Face Size (ft.)

Typical Distributor

Spouting Length (ft.)

Est. Catwalk Elevation (ft.) Wind & Ice Requirements

Medium Series - Available Heights / Weights (Kips)

Pulley Size (in.)

Face Size (ft.)

Typical Distributor

Spouting Length (ft.)

Est. Catwalk Elevation (ft.) Wind & Ice Requirements

Heavy Series - Available Heights / Weights (Kips)

Pulley Size (in.)

Face Size (ft.)

Typical Distributor

Spouting Length (ft.)

Est. Catwalk Elevation (ft.) Wind & Ice Requirements

Extra Heavy Series - Available Heights / Weights (Kips)

Pulley Size (in.)

Face Size (ft.)

Typical Distributor

Spouting Length (ft.)

Est. Catwalk Elevation (ft.) Wind & Ice Requirements

Design Standards1.) Structures are designed in accordance with IBC 2009 Standards for a 90 mph 3-second peak gust with no ice and 50 mph w/1” ice; per ACSE 7-05, Exposure Category C, Importance Factor .87.2.) Ice is considered to increase in thickness with height.

3.) Structures are also designed to meet IBC 2012 Standards for a 105 mph 3-second peak gust with no ice and 50 mph with 1” ice; per ASCE 7-10, Exposure Category C, Risk Category I.4.) Special tower bracing may be required for catwalk/walk-thru truss support where applicable.

www.lambtonconveyor.comLambton is a trademark of Lambton Conveyor Limited

Lambton Conveyor Limited 102 Arnold Street,Wallaceburg, Ontario, Canada, N8A 3P4Tel: +1 519.627.8228 Fax: +1 519.627.0250

Toll Free: +1 888.239.9713 (North America) Email: sales@lambtonconveyor.com

All specifications and designs are subject to change without notice due to continuous product improvement.

Our other range of products includes

CatwalksBucket ElevatorGrain Bins Hopper Bins

& many more

Distributors Chain Conveyors