Embed Size (px)
Citation preview
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND CONNECTION PLATES ITEMS 292, 293
(ELEMENT No' 3) - EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND ALL PLATES-
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSHG2 SEE DRAWING NCD6319_EN.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
TOWER STRUCTURE LAYOUT FOR MMSL2 SEE DRAWING NCD3599_EN.
TOWER STRUCTURE LAYOUT FOR MSL2 SEE DRAWING NCD3510_EN.
TOWER STRUCTURE LAYOUT FOR MSH2G SEE DRAWING NCD3460_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND ALL PLATES-
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
TOWER STRUCTURE LAYOUT FOR MMSL2 SEE DRAWING NCD3599_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND CONNECTION PLATES
ITEMS 302 & 303 - EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
IN ITEM 301A THERE ARE ADDITIONAL HOLES FOR CLIMBING STEPS.
ALL THE REST OF THE HOLES ARE THE SAME AS IN ITEM 301
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
IN ITEM 401A THERE ARE ADDITIONAL HOLES FOR CLIMBING STEPS.
ALL THE REST OF THE HOLES ARE THE SAME AS IN ITEM 401
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
IN ITEM 801A THERE ARE ADDITIONAL HOLES FOR CLIMBING STEPS.
ALL THE REST OF THE HOLES ARE THE SAME AS IN ITEM 801
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
IN ITEM 701A THERE ARE ADDITIONAL HOLES FOR CLIMBING STEPS.
ALL THE REST OF THE HOLES ARE THE SAME AS IN ITEM 701
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
IN ITEM 851A THERE ARE ADDITIONAL HOLES FOR CLIMBING STEPS.
ALL THE REST OF THE HOLES ARE THE SAME AS IN ITEM 851
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE -
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
TOWER STRUCTURE LAYOUT FOR MMSL2 SEE DRAWING NCD3599_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND ALL PLATES-
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSHG2 SEE DRAWING NCD6319_EN.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
TOWER STRUCTURE LAYOUT FOR MMSL2 SEE DRAWING NCD3599_EN.
TOWER STRUCTURE LAYOUT FOR MSL2 SEE DRAWING NCD3510_EN.
TOWER STRUCTURE LAYOUT FOR MSH2G SEE DRAWING NCD3460_EN.
TOWER STRUCTURE LAYOUT FOR MSR2 SEE DRAWING NCD6320_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND ALL PLATES-
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MSR2G SEE DRAWING NCD6320_EN.
MATERIALS: ANGLES FROM L60X60X6 AND ABOVE AND ALL PLATES-
EN10025-2-S355JO, OTHERS-EN10025-2- S235JR.
GALVANIZING: hot-dip zinc galvanized per ASTM-A123-09
FABRICATION OF TOWER ACCORDING TO SPECIFICATION NCS232
ALL MEASUREMENTS ARE IN MM.
TOWER STRUCTURE LAYOUT FOR MMSH2 SEE DRAWING NCD3355_EN.
