2
Product Dimensions · Description · Environmental · Life Time · Intrinsic Safety Data · Physical Characteristics · Installation · · Product Data Sheet Maximum Overload: Sensitivity (20 ): Response Time (T90): Zero Signal (20 ): Nominal Range: Temperature Range: Max. S/C Current: Max. O/C Voltage: Max. Current at 1000 ppm NH3 : REV.: 2016-01 Performance Characteristics · Note REV.: 2020/03 Page 1 0~500 ppm 55 s < 0.2 μA < 3 ppm Pressure Range: Humidity Range: Long Time Output Drift: Recommended Storage Temp: Expected Operating Life: Storage Life: Warranty: 12 months 6 months in original packaging ABS 1000 ppm Resolution: Baseline Shift (-40~ 50): Linearity: Bias Voltage: Linear up to 500 ppm 15% ~ 90%RH non-condensing 2 years in clean air < 2 % signal/month 1 ± 0.1 atm 0 mV 1 ppm -40~ 5010~ 30Output signals from the sensor pins are different. Inappropriate use of the pins in product design will affect the sensor functionality. Exposure to high concentrations of solvent vapors should be avoided under any condition. Mechanical overstress may cause deformation or cracks of the plastic enclosure of the sensor. If the sensor is used in extreme environmental conditions, please contact us for more details. The performance data in this document are conducted by using SemeaTech recom- mended test circuitry and test environment at 20℃, 50 %RH and 1 atm. Sensor perfor- mance varies under different environmental conditions. Please contact us if you need more details. 8 g None < 0.2 mA 1.3 V < 1.0 A 0.035 ± 0.015 μA/ppm Website: www.semeatech.com E-mail: [email protected] Weight (Nominal): Orientation: Housing Material: ELECTROCHEMICAL NH3-500S SENSOR(7 SERIES) (P/N:059-2400-000) This sensor is designed for the measurement of NH3 concentration in gas phase. It can be used as the pin-to-pin replacement of the standard 7-series electrochemical NH3 sensors which made by the other manufacturers. ± All dimensions in mm All tolerances ± 0.10 mm unless otherwise stated 45.0 45.0 17.0 Non-connected Counter Reference Sensing 13.9 15.3 3.4 1.0 24.0 1.5 O-Ring O-Ring 18.5 31.5 MAX 23.6 27.2

ELECTROCHEMICAL NH3-500S SENSOR 7 SERIES …...This product data sheet is used for reference only. Product Data Sheet Isobutene Ethanol 25 100 1000 5000 100 22 0 0-1 0 This sensor

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: ELECTROCHEMICAL NH3-500S SENSOR 7 SERIES …...This product data sheet is used for reference only. Product Data Sheet Isobutene Ethanol 25 100 1000 5000 100 22 0 0-1 0 This sensor

Product Dimensions· Description

·

Environmental·

Life Time·

Intrinsic Safety Data·

Physical Characteristics·

Installation· ·

Product Data Sheet

Maximum Overload:Sensitivity (20 ℃): Response Time (T90): Zero Signal (20 ℃):

Nominal Range:

Temperature Range:

Max. S/C Current: Max. O/C Voltage: Max. Current at 1000 ppm NH3 :

REV.: 2016-01

Performance Characteristics

·

Note

REV.: 2020/03Page 1

0~500 ppm

≤55 s < 0.2 μA

< 3 ppm

Pressure Range:Humidity Range:

Long Time Output Drift:Recommended Storage Temp:Expected Operating Life:Storage Life:Warranty: 12 months

6 months in original packaging

ABS

1000 ppm

Resolution:Baseline Shift (-40℃ ~ 50℃):

Linearity:Bias Voltage:

Linear up to 500 ppm

15% ~ 90%RH non-condensing

2 years in clean air

< 2 % signal/month

1 ± 0.1 atm

0 mV

1 ppm

-40℃ ~ 50℃

10℃ ~ 30℃

Output signals from the sensor pins are different. Inappropriate use of the pins in product design will affect the sensor functionality. Exposure to high concentrations of solvent vapors should be avoided under any condition. Mechanical overstress may cause deformation or cracks of the plastic enclosure of the sensor. If the sensor is used in extreme environmental conditions, please contact us for more details.

The performance data in this document are conducted by using SemeaTech recom- mended test circuitry and test environment at 20℃, 50 %RH and 1 atm. Sensor perfor-mance varies under different environmental conditions. Please contact us if you need more details.

8 gNone

< 0.2 mA1.3 V

< 1.0 A

0.035 ± 0.015 μA/ppm

Website: www.semeatech.comE - m a i l : [email protected]

Weight (Nominal): Orientation:

Housing Material:

ELECTROCHEMICAL NH3-500S SENSOR(7 SERIES) (P/N:059-2400-000)

This sensor is designed for the measurement of NH3 concentration in gas phase. It can be used as the pin-to-pin replacement of the standard 7-series electrochemical NH3 sensors which made by the other manufacturers.

±

All dimensions in mmAll tolerances ± 0.10 mm unless otherwise stated

45.045.017

.0

Non-connected

CounterReference

Sensing13

.915

.3

3.4

1.024.0

1.5

O-Ring

O-Ring

18.5

31.5 MAX

23.627.2

Page 2: ELECTROCHEMICAL NH3-500S SENSOR 7 SERIES …...This product data sheet is used for reference only. Product Data Sheet Isobutene Ethanol 25 100 1000 5000 100 22 0 0-1 0 This sensor

· Cross-Sensitivity Data

·

·

Safety Note

Gas Concentration (ppm)

REV.: 2020/03Page 2

This product data sheet is used for reference only.

Product Data Sheet

IsobuteneEthanol

25100

10005000

100

22 00

-10

This sensor is designed to be used in certain instruments for life critical applications. To ensure the sensor functioning per its specifications inside the instrument, it is required to read the instrument user’s guide carefully and comply with the cali- bration procedures by using certified target calibration gas before each use. Failure to do so may cause serious injury and fatality. Please do not open the sensor plastic enclosure because the electrolyte and other chemicals stored inside are harmful. It is highly recommended for customers to validate the sensor performance using the document as a reference for their product designs or applications.

SemeaTech is committed to provide its customers the most accurate data based on its best knowledge. SemeaTech does not provide product warranty for failures of using its products in accordance with product specifications that are described in the data sheet, or other misuse, abuse, negligence to the product.

Website: www.semeatech.comE - m a i l : [email protected]

Note: The cross sensitivities include but not limited to the above gases. It may also respond to other gases. The data in the table above may vary from different batches of sensors and the changes of test environment. Calibration using the gases that have the cross sensitivities to this sensor is not recommended.

Temperature Data

Output signal (ppm NH3 equivalent)Hydrogen Sulfide

ELECTROCHEMICAL NH3-500S SENSOR(7 SERIES) (P/N:059-2400-000)

1000 0

Carbon DioxideHydrogenCarbon Monoxide

Temperature Performance of SemeaTech 7NH3-500S Sensor

Temperature(℃)

Average

+95% confidence

- 95% confidence

50403020100-10-20-30-400

20

40

60

80

120

% O

utp

ut (

refe

renc

ed t

o 20

℃)

100