Upload
reynold-knight
View
216
Download
0
Tags:
Embed Size (px)
Citation preview
History In 1820 Hans Christian Oersted
discovered electricity passing through a wire created a magnetic field
However the only way to create an electric current at the time was reacting expensive materials (forerunner to a modern battery)
This is completely impractical to provide electricity on a large scale
Discovery A moving magnetic field can also
create and electric current This was discovered separately and
simultaneously by Michael Faraday in Britain and Joseph Henry in America in 1831.
Both moved a coil of wire over a magnet and saw a current was created, and the current created a magnetic field.
Electromagnetic Induction ~ the creation of a magnetic field by
electric current or the creation of an electric current by a magnetic field.
The amount of voltage depends on how quickly either the magnet or wire is moving.
Faster motion means a higher voltage will be created.
Faraday’s Law ~The induced voltage in a coil is
proportional to the product of the number of loops and the rate at which the magnetic field changes within those loops.
The voltage also depends upon the number of loops it is passing through
Eddy Current Moving a magnetic field through a
conductor shaped in a cylinder. (or vice versa)
causes a circulating flow of current (eddy)
The resistance in the conductor causes a dragging effect (like friction) slowing the magnet down.
These are used as breaking systems at the end of some roller coasters
Generators Generators produce electricity by
spinning a coil of wire in front of permanent magnets.
Since it keeps going back and forth it produces an alternating current.
If you want a DC current you have use a commutator (works the same as the stuff in a DC motor)
Alternating Current Remember alternating current
simply sway back and forth They don’t move through (constantly
in one direction) a wire The electrons have a net movement
forward, then backward (repeat) This is why alternating current
generators are called an alternator
Generator
DC generator in action
AC generator in action
Generators The shaft of the loop of wires is
connected to a turbine. The goal of all electric power plants
is to get a turbine to spin. By spinning this turbine we can
convert mechanical (kinetic) energy to electromagnetic energy.
Types of power plants Hydroelectric- put a turbine in a river
or water fall and let the water spin the turbine.
Coal- burn coal to boil water, steam rises and spins a turbine.
Nuclear- same as coal but use a nuclear fission to boil water.