Electric Motors and · PDF fileNET PRICE CATALOG Electric Motors and Accessories 800-884-0404 [email protected]

NET PRICE CATALOG

Electric Motorsand

Accessories

[email protected]

Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]

Mission Statement

Company History

To provide the United States market for industrial motors and controls withproducts which meet or exceed customer expectations for quality, performance,and reliability at the lowest possible cost and delivered in accordance with thecustomer’s schedule, through our authorized distributor network.

North American Electric, Inc. is a wholesale supplier of Special Purpose andGeneral Purpose, AC electric motors, controls, and shaft mount reducers. Wetake pride in supplying high performance, high quality products at extremelycompetitive prices throughout the United States. Donald E. Hackman, Sr. andDavid E. Hackman founded the company in October of 1993. The company’sprimary focus is sourcing quality electric motors from various manufacturers,both locally and internationally, and distributing them throughout the UnitedStates through local distributors and service centers. Our nationwide distributorand service network offer strong local support for our products by providingcritical logistical, technical and maintenance support as well as fast, friendlycustomer service.

Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]

Effective: August 15, 2012

WARRANTY POLICY

All electric motors sold by North American Electric, Inc. are warranted to be free from defects in material and workmanship. Thewarranty is 24 months from the date of manufacture but no less than 18 months from date of invoice or 12 months from the date themotor is installed whichever occurs first.

North American Electric, Inc. shall, at its option and expense, either repair or replace any such motor or part, which is defectivewithin the warranty period. To be covered under warranty, any motor must have at all times been operated or used under normaloperating conditions for which the motor was designed.

In the event of warranty claims, North American Electric, Inc. must be notified promptly following any motor failure. The motor shouldbe sent to a North American Electric, Inc. authorized service center to diagnose the cause of failure and the warranty procedureoutlined below must me strictly followed. After this examination, a determination will be made if the failure was due to defectivematerial and/or workmanship. If the failure was due to defective material and/or workmanship, North American Electric, Inc. willreplace or repair the motor.

North American Electric’s liability under this warranty or any other warranty whether expressed or implied in law or fact shall belimited to the repair or replacement of defective material and workmanship, and in no event shall North American Electric, Inc. be liablefor consequential or indirect damages, including freight.

WARRANTY PROCEDURE

In the event of a motor failure please follow the following steps to ensure that your claim is processed in a timely manner:

STEP 1.

Have the motor inspected by a qualified service shop to determine if the problem is a result of defects in materials and/or workmanship.North American Electric, Inc. will pay a reasonable inspection fee for the inspection that will include a written warranty report thatdescribes the cause of failure along with photographs that show in detail what is described in the warranty report.

STEP 2.

Contact our warranty department and be prepared to provide the following:

1.) Serial Number2.) Model Number3.) EASA Report4.) Photographs showing the cause of failure5.) Estimated cost of repair6.) Nameplate (photo of nameplate for stainless steel / washdown duty motors) if motor is to be replaced

STEP 3.

Our warranty department will determine whether to replace or repair the defective motor. DO NOT repair any motor without priorwritten purchase order from North American Electric, Inc. Always be sure to take clear photographs showing the cause of motorfailure before beginning any repair work. If the motor is replaced you must send in the nameplate of the failed motor to receivecredit (photo of nameplate is required for stainless steel / washdown duty motors).

Effective: August 15, 2012

WARRANTY POLICY

All Shaft Mount Gear Reducers (hereinafter referred to as SMRs) sold by North American Electric, Inc. are warranted to be free fromdefects in material and workmanship. The warranty is 24 months from the date of months from date of invoice. Also, all SMRsinstalled within 18 months from date of manufacture will be warranted for no less than 12 months from the date the SMR is installed.

North American Electric, Inc. shall, at its option and expense, either repair or replace any such SMR or part, which is defective withinthe warranty period. To be covered under warranty, any SMR must have at all times been operated or used under normal operatingconditions for which the SMR was designed.

In the event of warranty claims, North American Electric, Inc. must be notified promptly following any SMR failure. The SMR shouldbe sent to a North American Electric, Inc. authorized service center to diagnose the cause of failure and the warranty procedure outlinedbelow must me strictly followed. After this examination, a determination will be made if the failure was due to defective material and/orworkmanship. If the failure was due to defective material and/or workmanship, North American Electric, Inc. will replace or repair theSMR.

North American Electric’s liability under this warranty or any other warranty whether expressed or implied in law or fact shall belimited to the repair or replacement of defective material and workmanship, and in no event shall North American Electric, Inc. be liablefor consequential or indirect damages, including freight.

WARRANTY PROCEDURE

In order to ensure that your claim is processed in a timely manner please follow the following steps in the event of a warranty.

STEP 1.

Have the motor inspected by a qualified service shop to determine if the problem is a result of defects in materials and/or workmanship.North American Electric, Inc. will pay a reasonable inspection fee for the inspection that will include a written warranty report thatdescribes the cause of failure along with photographs that show in detail what is described in the warranty report.

STEP 2.

Contact our warranty department and be prepared to provide the following:

1.) Serial Number2.) Model Number3.) EASA Report4.) Photographs showing the cause of failure5.) Estimated cost of repair

STEP 3.

Our warranty department will determine whether to replace or repair the defective motor. DO NOT repair any motor without prior writ-ten approval from North American Electric, Inc. Always be sure to take clear photographs showing the cause of motor failure beforebeginning any repair work.

CONTACT INFORMATION:

North American Electric, Inc., Warranty Department, Phone: (800) 884-0404 Fax: (662) 429-8546

Contract Pricing ‐ Kaman Industrial Technologies, Inc.

Multiplier

Symbol DESCRIPTION Multiplier

NORTH AMERICAN ELECTRIC, INC.M1 General Purpose, Single Phase, 56C Frame, TEFC 0.377

M1 Farm Duty, Single Phase, 56C Frame, TEFC 0.377

M2 General Purpose, Three Phase, 56C Frame, TEFC 0.377

M3 General Purpose, Three Phase, Cast Iron, Hostile Duty - NEHE TYPE 0.405

M4 Premium Crusher Design Motors - 586U/UZ and 587U/UZ Frames 0.358

M5 Explosion Proof Motors - Three Phase 0.403

M6 Oil Well Pump Motors 0.386

M7 General Purpose, Three Phase, Rolled Steel, TEFC 0.458

M8 General Purpose, Three Phase, Rolled Steel, ODP 0.458

M9 General Purpose, Single Phase, ODP 0.470

M10 Single Phase, Farm Duty 0.407

M11 Accessories - (C-Flanges, D-Flanges, Couplings, Slide Bases Severe Duty Kits) 0.405

M12 EISA Compliant and Premium Crusher Design Motors - 143T - 449T Frames 0.405

M13 General Purpose, Three Phase, Aluminum Frame Motors 0.487

M14 High Efficiency Plus - Severe Duty - NEHE TYPE 0.434

M15 Vertical Hollow Shaft Motors - 215TP and 445TP Frames 0.321

M16 General Purpose, NEMA Premium Efficiency, Inverter Duty Motors 0.405

M17 Special Purpose Close Coupled Pump Motors 0.357

M18 Stainless Steel, Washdown Duty Motors 0.344

M19 Rotary Phase Converter Motors 0.357

M20 Vertical Hollow Shaft Motors - 5006P and 5008P Frames 0.344

M21 Shaft Mount Gear Reducers 0.270

M22 Shaft Mount Gear Reducer Accessories 0.270

M23 Shaft Mount Gear Reducer Repair Kits 0.270

TABLE OF CONTENTS

Page

General Purpose Motors:

Rolled Steel Motors:

Single Phase 1

Three Phase 2

Three Phase Open Drip Proof 3

Three Phase Totally Enclosed Fan Cooled 4

Cast Iron Motors:

EISA Compliant – Inverter Rated – Foot Mounted 5-7

EISA Compliant – Inverter Rated – C-Flange Footed 8

NEMA Premium ® - Premium Efficient – Inverter Duty – Foot Mounted 9-11

NEMA Premium ® - Premium Efficient – Inverter Duty – C-Flange Footed or RB 12

Special Purpose Motors:

Premium Crusher Design

NEMA Design C – EISA Compliant – Specifically designed for crusher applications 13-15

Explosion Proof Motors:

NEMA Premium ® - Explosion Proof Motors – Foot Mounted 16-17

NEMA Premium ® - Explosion Proof Motors – C-Flange Footed 18

Compressor Duty Motors:

Single Phase, Open Drip Proof, Compressor Duty Motors 19

Farm Duty Motors:

Single Phase, Totally Enclosed Fan Cooled, Farm Duty Motors 20

Stainless Steel Washdown Duty Motors:

Designed for food processing, Pharmaceuticals, and other environments requiring

Frequent washdowns.

C-Flange Footed 21

C-Flange Round Body 22

Oil Well Pump Motors:

Designed specifically for oil well pumping units

Oil Well Pump Motors – Totally enclosed fan cooled 23

Oil Well Pump Motors – Open Drip Proof 24

Close – Coupled Pump Motors:

JM Frames – Totally Enclosed Fan Cooled 25

JP Frames – Totally Enclosed Fan Cooled 26

Page

Vertical Hollow Shaft Motors:

Motors designed specifically for use on deep well turbine pumps 27

High Efficiency motors specifically designed for use on deep well turbine pumps 28

Couplings for Vertical Hollow Shaft motors 29

Parts and Accessories for Vertical Hollow Shaft motors: 30

Non Reverse Ball Bearing Ratchet Assembly Sight Glass Kits Top Covers Alternative Bases

Rotary Phase Converter Motors:

Motors designed specifically for Rotary Phase Converters 31

Unwound Motors: Can be wound to specification 32

Electric Motors Control:

Prepackaged Pump Control Starter Panels / NEMA 3R Enclosure:

Pump Control Starter Panels with Fusible Disconnect 33

Pump Control Starter Panels with Combination Circuit Breaker 34

Soft Starts – Severe Crusher Duty / Packaged with Circuit Breaker

Solid State Starters w/ ATL Bypass / NEMA 4/12 Enclosure 35

Solid State Starters w/ ATL Bypass / NEMA 3R Enclosure 35

Electric Motor Accessories:

Field Conversion Kits (C-Flange, D-Flange, & Severe Duty Kits):

C-Flange Kits – NEWT & NEPE Frame Types 36

D-Flange Kits – NEWT & NEPE Frame Types 36

C-Flange Kits – RSTE Frame Types (Rolled Steel TEFC) 37

C-Flange Kits – FD Frame Types (Farm Duty Motors) 37

C-Flange Kits – SODP Frame Types (Single Phase ODP Motors) 37

C-Flange Kits – NEXP Frame Types (Explosion Proof Motors) 38

Severe Duty Kits – NEWT Frame Type ( Gen. Purp. Cast Iron Motors) 39

Severe Duty Kits - HEHE, NEXP, & NEH Frame Types (Explosion Proof) 39

Motor Slide Bases:

Double adjusting screw style slide bases 40

Shaft Mount Gear Reducers:

NBS Shaft Mount Gear Reducers 41

NBS Shaft Mount Parts & Accessories 42-43

NBS Shaft Mount Repair Kits 44

GENERAL PURPOSESINGLE PHASE, TEFC, 56C FRAMEREMOVABLE FEET

APPLICATIONS: NET PRICING M1 0.377

General purpose use on pumps, fans, blowers, compressors, conveyors, farm equipment and other industrial and commercialmachinery installed in damp, dusty or dirty environments. IP55 Protection as standard. Suitable for indoor and outdoor applications.These motors have high starting torques and are well-suited for applications with high starting loads.

FEATURES:

* High Efficiency Design * High starting torques* 1.15 Service Factor @ 60 hertz * NEMA Design B performance* Vacuum Pressure Impregnation for all windings * Rolled Steel frame construction; Aluminum endbells* Sealed bearings * C-Flange with Removable Feet as standard* Class F insulation system, class B rise at full load * IP55 Protection as standard; Suitable for indoor/outdoor use* 40° C ambient continuous duty * CSA + C + US Certification* Stainless steel nameplate and zinc plated hardware * Meets or exceeds NRCan efficiency requirements* 56CH Frames: Feet are dual drilled for mounting flexibility * ISO 9001 Certification

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1/3 3600 56C 115/208-230 F56C1/3S2C 56C1 $94.25 M1 58.5 12.6 23 1

1800 56C 115/208-230 F56C1/3S4C 56C1 $99.91 M1 65.0 12.6 23 11/2 3600 56C 115/208-230 F56C1/2S2C 56C1 $98.02 M1 68.0 12.6 24 1

1800 56C 115/208-230 F56C1/2S4C 56C1 $103.68 M1 72.0 12.6 25 13/4 3600 56C 115/208-230 F56C3/4S2C 56C1 $105.56 M1 73.5 12.6 26 1

1800 56C 115/208-230 F56C3/4S4C 56C1 $112.35 M1 73.5 12.6 29 11 3600 56C 115/208-230 F56C1S2C 56C1 $109.33 M1 75.5 12.6 30 1

1800 56C 115/208-230 F56C1S4C 56C1 $118.76 M1 74.0 12.6 38 11.5 3600 56C 115/208-230 F56C1.5S2C 56C1 $114.99 M1 78.5 12.6 38 1

1800 56CH 115/208-230 F56CH1.5S4C 56C1 $145.15 M1 77.0 14.2 42 12 3600 56CH 115/208-230 F56CH2S2C 56C1 $130.07 M1 76.0 14.2 44 1

1800 56C H 115/208-230 F56CH2S4C 56C1 $171.54 M1 76.5 14.2 47 1

Notes:1.) Removable Feet

Toll Free: 800-884-0404 * www.naemotors.com * [email protected] 1

GENERAL PURPOSETHREE PHASE, TEFC, 56C FRAMEREMOVABLE FEET


General purpose use on pumps, fans, blowers, compressors, conveyors, farm equipment and other industrial and commercial machineryinstalled in damp, dusty or dirty environments. IP55 Protection as standard. Suitable for indoor and outdoor applications. Additionally,these motors do utilize phase isulation materials that are suitable for use with Variable Frequency Drives.

FEATURES:

* High Efficiency Design * NEMA Design B performance * 1.15 Service Factor @ 60 hertz * Rolled Steel frame construction; Aluminum endbells * Vacuum Pressure Impregnation for all windings * C-Flange with Removable Feet as standard * Sealed bearings * IP55 Protection as standard; Suitable for indoor / outdoor use * Class F insulation system, class B rise at full load * Suitable for use with Variable Frequency Drives * 40° C ambient continuous duty * CSA + C + US Certification * Stainless steel nameplate and zinc plated hardware * Meets or exceeds NRCan efficiency requirements * 56CH Frames: Feet are dual drilled for mounting flexibility * ISO 9001 Certification * High starting torques

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1/3 3600 56C 208-230/460 F56C1/3M2A 56C3 $92.37 M2 54.9 12.6 23 1

1800 56C 208-230/460 F56C1/3M4A 56C3 $86.71 M2 64.0 12.6 24 11/2 3600 56C 208-230/460 F56C1/2M2A 56C3 $96.14 M2 63.6 12.6 25 1

1800 56C 208-230/460 F56C1/2M4A 56C3 $90.48 M2 68.2 12.6 25 13/4 3600 56C 208-230/460 F56C3/4M2A 56C3 $99.91 M2 62.0 12.6 25 1

1800 56C 208-230/460 F56C3/4M4A 56C3 $96.14 M2 72.2 12.6 28 11 3600 56C 208-230/460 F56C1M2A 56C3 $105.56 M2 68.6 12.6 25 1

1800 56C 208-230/460 F56C1M4A 56C3 $111.22 M2 80.3 12.6 33 11.5 3600 56C 208-230/460 F56C1.5M2A 56C3 $113.10 M2 73.9 12.6 28 1

1800 56C 208-230/460 F56C1.5M4A 56C3 $130.07 M2 80.9 12.6 36 12 3600 56C 208-230/460 F56C2M2A 56C3 $118.76 M2 83.5 12.6 33 1

1800 56C H 208-230/460 F56CH2M4A 56C3 $147.03 M2 83.5 14.2 44 13 3600 56C H 208-230/460 F56CH3M2A 56C3 $133.84 M2 82.5 14.2 41 1

Notes:1.) Removable Feet


EISA

GENERAL PURPOSE COMPLIANT

THREE PHASE, OPEN DRIPPROOFROLLED STEEL CONSTRUCTIONENERGY EFFICIENT - EPACT RATED

NET PRICING M8 0.458

APPLICATIONS:

General purpose use on pumps, fans, blowers, compressors, Material Handling and other general purpose applications wherecomtaminants are minimal.

FEATURES:

* Meets or exceeds EPACT '92 and NRCan efficiency requirements * F1/F2 reversible * Suitable for wye-delta start on 213T frame and above * Feet are dual drilled for mounting flexibility * Dual voltage ratings suitable for part wind start on lower voltage * NEMA Design B performance * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * Rolled steel frame construction * Inverter Rated (10:1 variable torque - 5:1 constant torque) * C-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Class F insulation system, class B rise at full load * IP23 Protection * 40° C ambient continuous duty * CSA + C + US Certification * Corrosion resistant epoxy paint * ISO 9001 Certification * Stainless steel nameplate and zinc plated hardware

CATALOG FRAME NET MULT. FULL "C" WT.

HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES

1 1800 143T 208-230/460 D143T1M4A RSDP $130.53 M8 82.5 11.8" 41

1200 145T 208-230/460 D145T1M6A RSDP $148.85 M8 80.0 11.8" 40

1.5 3600 143T 208-230/460 D143T1.5M2A RSDP $136.94 M8 82.5 11.8" 37

1800 145T 208-230/460 D145T1.5M4A RSDP $139.69 M8 84.0 11.8" 44

1200 182T 208-230/460 D182T1.5M6A RSDP $212.97 M8 84.0 13.5" 67

2 3600 145T 208-230/460 D145T2M2A RSDP $141.52 M8 84.0 11.8" 38

1800 145T 208-230/460 D145T2M4A RSDP $144.27 M8 84.0 11.8" 48

1200 184T 208-230/460 D184T2M6A RSDP $231.29 M8 85.5 13.5" 73

3 3600 145T 208-230/460 D145T3M2A RSDP $158.01 M8 84.0 11.8" 41

1800 182T 208-230/460 D182T3M4A RSDP $217.55 M8 86.5 13.5" 78

1200 213T 208-230/460 D213T3M6A RSDP $318.31 M8 86.5 16.8" 103

5 3600 182T 208-230/460 D182T5M2A RSDP $286.25 M8 85.5 13.5" 73

1800 184T 208-230/460 D184T5M4A RSDP $233.58 M8 87.5 13.5" 85

1200 215T 208-230/460 D215T5M6A RSDP $364.11 M8 87.5 16.8" 112

7.5 3600 184T 208-230/460 D184T7.5M2A RSDP $304.57 M8 87.5 13.5" 80

1800 213T 208-230/460 D213T7.5M4A RSDP $332.05 M8 88.5 16.8" 120

10 3600 213T 208-230/460 D213T10M2A RSDP $414.49 M8 88.5 16.8" 114

1800 215T 208-230/460 D215T10M4A RSDP $354.95 M8 89.5 16.8" 131

15 3600 215T 208-230/460 D215T15M2A RSDP $441.97 M8 89.5 16.8" 126

1800 254T 208-230/460 D254T15M4A RSDP $526.70 M8 91.0 21.8" 195

20 1800 256T 208-230/460 D256T20M4A RSDP $572.50 M8 91.0 21.8" 206


EISACOMPLIANT

GENERAL PURPOSETHREE PHASE, TOTALLY ENCLOSED FAN COOLEDROLLED STEEL CONSTRUCTIONENERGY EFFICIENT - EPACT RATED

NET PRICING M7 0.458APPLICATIONS:

General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installedin damp, dusty or dirty environments. Additionally, these motors are suitable for use on variable frequency drives.

FEATURES:

* Meets or exceeds EPACT '92 and NRCan efficiency requirements * F1/F2 reversible * Suitable for wye-delta start on 213T frame and above * Feet are dual drilled for mounting flexibility * Dual voltage ratings suitable for part wind start on lower voltage * NEMA Design B performance * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * Rolled steel frame construction * Inverter Rated (10:1 variable torque - 5:1 constant torque) * C-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Class F insulation system, class B rise at full load * IP55 Protection * 40° C ambient continuous duty * CSA + C + US Certification * Corrosion resistant epoxy paint * ISO 9001 Certification * Stainless steel nameplate and zinc plated hardware


HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES

1 1800 143T 208-230/460 F143T1M4A RSTE $139.69 M7 82.5 13.3" 48

1.5 3600 143T 208-230/460 F143T1.5M2A RSTE $144.27 M7 82.5 13.3" 43

1800 145T 208-230/460 F145T1.5M4A RSTE $148.85 M7 84.0 13.3" 52

2 3600 145T 208-230/460 F145T2M2A RSTE $164.88 M7 84.0 13.3" 45

1800 145T 208-230/460 F145T2M4A RSTE $153.89 M7 84.0 13.3" 55

3 3600 182T 208-230/460 F182T3M2A RSTE $274.80 M7 85.5 15.8" 69

1800 182T 208-230/460 F182T3M4A RSTE $219.84 M7 87.5 15.8" 88

5 3600 184T 208-230/460 F184T5M2A RSTE $297.70 M7 87.5 15.8" 88

1800 184T 208-230/460 F184T5M4A RSTE $235.87 M7 87.5 15.8" 95

7.5 3600 213T 208-230/460 F213T7.5M2A RSTE $412.20 M7 88.5 19.0" 121

1800 213T 208-230/460 F213T7.5M4A RSTE $320.60 M7 89.5 19.0" 137

10 3600 215T 208-230/460 F215T10M2A RSTE $435.10 M7 89.5 19.0" 134

1800 215T 208-230/460 F215T10M4A RSTE $350.37 M7 89.5 19.0" 146


EISA COMPLIANT - GENERAL PURPOSE MOTORSTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONNEMA DESIGN C - HIGH TORQUE



General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in dampdusty or dirty environments. Also good for use with industrial equipment requiring extremly high starting torques and breakdown torques.

FEATURES:

* Meets or exceeds EISA Efficiency Requirements * 40° C ambient continuous duty * Class I, Div II Groups ABCD, T2B * Corrosion resistant paint * Suitable for wye-delta start on 213T frame and above * Stainless steel nameplate and zinc plated hardware * Dual voltage ratings suitable for part wind start on lower voltage * F1/F2 reversible * Single voltage ratings suitable for part wind start at 460V are noted * Feet are dual drilled on most frames for mounting flexibility * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design C performance * Suitable for 575V @ 1.0 Service Factor * Cast iron frame construction including the conduit box * Inverter Rated (10:1 variable torque; 5:1 constant torque) * C-Flange and D-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Regreasable open bearings 254T frame and above * IP55 Protection - Terminal box is sealed for IP66 protection * Mechanical "V" Seal on drive end * CSA + C + US Certification * Class F insulation system, class B rise at full load * ISO 9001 Certification

CATALOG FRAME NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES1 1800 143T 208-230/460 PE143T-1-4C NEWT $114.21 M12 320 12.5 55 2,4,5

1800 143T 575 PE143T-1-4C-575V NEWT $126.77 M12 320 12.5 55 2,41200 145T 208-230/460 PE145T-1-6C NEWT $158.76 M12 340 13.5 68 2,4,51200 145T 575 PE145T-1-6C-575V NEWT $167.27 M12 340 13.5 68 2,4900 182T 208-230/460 PE182T-1-8C NEWT $206.55 M12 320 15.3 64 2,4,5

1.5 3600 143T 208-230/460 PE143T-1.5-2-EC NEWT $154.71 M12 260 15.3 60 2,4,53600 143T 575 PE143T-1.5-2-EC-575V NEWT $161.60 M12 260 15.3 60 2,41800 145T 208-230/460 PE145T-1.5-4C NEWT $140.94 M12 300 13.5 62 2,4,51800 145T 575 PE145T-1.5-4C-575V NEWT $157.14 M12 300 13.5 62 2,41200 182T 208-230/460 PE182T-1.5-6C NEWT $165.24 M12 320 15.3 90 2,4,51200 182T 575 PE182T-1.5-6C-575V NEWT $183.47 M12 320 15.3 90 2,4900 184T 208-230/460 PE184T-1.5-8C NEWT $257.18 M12 310 16.0 91 2,4,5

2 3600 145T 208-230/460 PE145T-2-2-EC NEWT $168.48 M12 220 13.5 62 2,4,53600 145T 575 PE145T-2-2-EC-575V NEWT $187.52 M12 220 13.5 62 2,41800 145T 208-230/460 PE145T-2-4C NEWT $149.45 M12 280 13.5 64 2,4,51800 145T 575 PE145T-2-4C-575V NEWT $166.05 M12 280 13.5 64 2,41200 184T 208-230/460 PE184T-2-6C NEWT $218.70 M12 300 16.0 91 2,4,51200 184T 575 PE184T-2-6C-575V NEWT $243.41 M12 300 16.0 91 2,4900 213T 208-230/460 PE213T-2-8C NEWT $364.50 M12 340 19.0 145 2,4,5

3 3600 145T 208-230/460 PE145T-3-2-EC NEWT $214.25 M12 300 16.0 91 2,4,53600 182T 208-230/460 PE182T-3-2-EC NEWT $214.25 M12 300 16.0 91 2,4,53600 182T 575 PE182T-3-2-EC-575V NEWT $238.14 M12 300 16.0 91 2,41800 182T 208-230/460 PE182T-3-4C NEWT $190.76 M12 340 15.3 90 2,4,51800 182T 575 PE182T-3-4C-575V NEWT $211.82 M12 340 15.3 90 2,41200 213T 208-230/460 PE213T-3-6C NEWT $326.84 M12 340 15.3 90 2,4,51200 213T 575 PE213T-3-6C-575V NEWT $363.29 M12 340 15.3 90 2,4900 215T 208-230/460 PE215T-3-8C NEWT $509.49 M12 340 22.5 165 2,4,5


7.5 3600 184T 208-230/460 PE184T-7.5-2-EC NEWT $364.50 M12 240 16.0 118 2,4,53600 213T 208-230/460 PE213T-7.5-2-EC NEWT $364.50 M12 220 19.0 157 2,4,53600 213T 575 PE213T-7.5-2-EC-575V NEWT $405.00 M12 220 19.0 157 2,41800 213T 208-230/460 PE213T-7.5-4C NEWT $295.25 M12 270 19.0 157 2,4,51800 213T 575 PE213T-7.5-4C-575V NEWT $328.05 M12 270 19.0 157 2,41200 254T 208-230/460 PE254T-7.5-6C NEWT $483.17 M12 240 23.4 260 2,4,51200 254T 575 PE254T-7.5-6C-575V NEWT $536.63 M12 240 23.4 260 2,4900 256T 208-230/460 PE256T-7.5-8C NEWT $672.30 M12 290 25.1 305 2,4,5



CATALOG NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES

3600 254T 575 PE254T-15-2-EC-575V NEWT $664.20 M12 220 23.4 289 2,41800 254T 208-230/460 PE254T-15-4C NEWT $492.48 M12 240 23.4 289 2,4,51800 254T 575 PE254T-15-4C-575V NEWT $547.16 M12 240 23.4 289 2,41200 284T 208-230/460 PE284T-15-6C NEWT $824.99 M12 240 28.0 392 2,4,51200 284T 575 PE284T-15-6C-575V NEWT $916.92 M12 240 28.0 392 2,4900 286T 208-230/460 PE286T-15-8C NEWT $1,258.34 M12 260 29.5 456 2,4,5

20 3600 256T 208-230/460 PE256T-20-2-EC NEWT $753.30 M12 220 25.1 341 2,4,53600 256T 575 PE256T-20-2-EC-575V NEWT $837.54 M12 220 25.1 341 2,41800 256T 208-230/460 PE256T-20-4C NEWT $588.06 M12 230 25.1 341 2,4,51800 256T 575 PE256T-20-4C-575V NEWT $653.67 M12 230 25.1 341 2,41200 286T 208-230/460 PE286T-20-6C NEWT $1,029.11 M12 220 29.5 454 2,4,51200 286T 575 PE286T-20-6C-575V NEWT $1,143.72 M12 220 29.5 454 2,4900 324T 208-230/460 PE324T-20-8C NEWT $1,475.01 M12 250 30.3 547 2,4,5

25 3600 256T 208-230/460 PE256T-25-2-EC NEWT $933.12 M12 210 28.0 430 2,4,53600 284T 208-230/460 PE284T-25-2-EC NEWT $933.12 M12 210 28.0 430 2,4,53600 284TS 208-230/460 PE284TS-25-2-EC NEWT $933.12 M12 210 28.0 430 2,4,53600 284TS 575 PE284TS-25-2-EC-575V NEWT $1,036.80 M12 210 28.0 430 2,41800 284T 208-230/460 PE284T-25-4C NEWT $803.12 M12 240 28.0 432 2,4,51800 284T 575 PE284T-25-4C-575V NEWT $851.72 M12 240 28.0 432 2,41800 284TS 208-230/460 PE284TS-25-4C NEWT $803.12 M12 240 28.0 432 2,4,51200 324T 208-230/460 PE324T-25-6C NEWT $1,170.45 M12 220 30.3 541 2,4,51200 324T 575 PE324T-25-6C-575V NEWT $1,300.46 M12 220 30.3 541 2,4900 326T 208-230/460 PE326T-25-8C NEWT $1,656.86 M12 220 31.8 599 2,4,5

30 3600 286T 208-230/460 PE286T-30-2-EC NEWT $985.37 M12 205 29.5 472 2,4,53600 286TS 208-230/460 PE286TS-30-2-EC NEWT $985.37 M12 205 29.5 472 2,4,53600 286TS 575 PE286TS-30-2-EC-575V NEWT $1,499.72 M12 205 29.5 472 2,41800 286T 208-230/460 PE286T-30-4C NEWT $866.70 M12 250 29.5 474 2,4,51800 286T 575 PE286T-30-4C-575V NEWT $963.09 M12 250 29.5 474 2,41800 286TS 208-230/460 PE284TS-30-4C NEWT $866.70 M12 250 29.5 474 2,4,51200 326T 208-230/460 PE326T-30-6C NEWT $1,374.17 M12 220 31.8 597 2,4,51200 326T 575 PE326T-30-6C-575V NEWT $1,526.85 M12 220 31.8 597 2,4900 364T 208-230/460 PE364T-30-8C NEWT $1,989.77 M12 200 33.2 789 2,4,5

40 3600 286T 208-230/460 PE286T-40-2-EC NEWT $1,269.27 M12 205 30.8 588 2,4,53600 286TS 208-230/460 PE286TS-40-2-EC NEWT $1,269.27 M12 205 30.8 588 2,4,53600 324T 208-230/460 PE324T-40-2-EC NEWT $1,269.27 M12 205 30.8 588 2,4,53600 324TS 208-230/460 PE324TS-40-2-EC NEWT $1,269.27 M12 205 30.8 588 2,4,53600 324TS 575 PE324TS-40-2-EC-575V NEWT $1,531.31 M12 205 30.8 588 2,41800 324T 208-230/460 PE324T-40-4C NEWT $1,112.94 M12 240 30.8 590 2,4,51800 324TS 208-230/460 PE324TS-40-4C NEWT $1,112.94 M12 240 30.8 590 2,4,51800 324T 575 PE324T-40-4C-575V NEWT $1,236.47 M12 240 30.8 590 2,41200 364T 208-230/460 PE364T-40-6C NEWT $1,707.89 M12 200 33.2 786 2,4,51200 364T 575 PE364T-40-6C-575V NEWT $1,897.83 M12 200 33.2 786 2,4900 365T 208-230/460 PE365T-40-8C NEWT $2,433.65 M12 190 34.2 881 2,4,5

50 3600 326T 208-230/460 PE326T-50-2-EC NEWT $1,594.49 M12 200 31.8 681 2,4,53600 326TS 208-230/460 PE326TS-50-2-EC NEWT $1,594.49 M12 200 31.8 681 2,4,53600 326TS 575 PE326TS-50-2-EC-575V NEWT $1,771.88 M12 200 31.8 681 2,41800 326T 208-230/460 PE326T-50-4C NEWT $1,391.99 M12 240 31.8 683 2,4,51800 326TS 208-230/460 PE326TS-50-4C NEWT $1,391.99 M12 240 31.8 683 2,4,51800 326T 575 PE326T-50-4C-575V NEWT $1,546.70 M12 240 31.8 683 2,41200 365T 208-230/460 PE365T-50-6C NEWT $2,239.65 M12 200 34.2 863 2,4,51200 365T 575 PE365T-50-6C-575V NEWT $2,488.32 M12 200 34.2 863 2,4900 404T 208-230/460 PE404T-50-8C NEWT $2,916.41 M12 240 37.0 1057 2,4,5



100 3600 405T 208-230/460 PE405T-100-2-EC NEWT $3,367.58 M12 200 38.5 1170 2,4,53600 405TS 208-230/460 PE405TS-100-2-EC NEWT $3,367.58 M12 200 38.5 1170 2,4,53600 405TS 575 PE405TS-100-2-EC-575V NEWT $3,742.20 M12 200 38.5 1170 2,41800 405T 208-230/460 PE405T-100-4C NEWT $2,702.16 M12 210 38.5 1172 2,4,51800 405TS 208-230/460 PE405TS-100-4C NEWT $2,702.16 M12 210 38.5 1172 2,4,51800 405T 575 PE405T-100-4C-575V NEWT $3,002.27 M12 210 38.5 1172 2,41200 444T 208-230/460 PE444T-100-6C NEWT $3,755.57 M12 220 42.8 1432 2,4,51200 444T 575 PE444T-100-6C-575V NEWT $4,172.72 M12 220 42.8 1432 2,4900 445T 208-230/460 PE445T-100-8C NEWT $5,215.19 M12 220 44.8 1465 2,4,5900 445T 575 PE445T-100-8C-575V NEWT $5,794.74 M12 220 44.8 1465 2,4,5


15

CATALOG NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES125 1800 444T 460 PE444T-125-4C NEWT $3,525.12 M12 220 42.8 1432 2,4

1800 444T 460 PE444T-125-4C-BB NEWT $3,525.12 M12 220 42.8 1432 2,4,81800 444T 460 PE444T-125-4C-PWS NEWT $3,525.12 M12 220 42.8 1432 2,4,61800 444TS 460 PE444TS-125-4C NEWT $3,525.12 M12 220 42.8 1432 2,41800 444T 575 PE444T-125-4C-575V NEWT $3,916.76 M12 220 42.8 1432 2,41200 445T 460 PE445T-125-6C NEWT $4,375.62 M12 220 44.8 1465 2,41200 445T 575 PE445T-125-6C-575V NEWT $4,862.03 M12 220 44.8 1465 2,4900 447T 460 PE447T-125-8C NEWT $6,700.73 M12 220 48.3 1575 2,4900 447T 575 PE447T-125-8C-575V NEWT $7,445.12 M12 220 48.3 1575 2,4

150 3600 445TS 460 PE445TS-150-2-EC NEWT $4,739.31 M12 200 44.8 1562 2,43600 445TS 575 PE445TS-150-2-EC-575V NEWT $5,265.81 M12 200 44.8 1562 2,41800 445T 460 PE445T-150-4C NEWT $3,870.99 M12 200 44.8 1564 2,41800 445T 460 PE445T-150-4C-BB NEWT $3,870.99 M12 200 44.8 1564 2,4,81800 445T 460 PE445T-150-4C-PWS NEWT $3,870.99 M12 200 44.8 1564 2,4,61800 445TS 460 PE445TS-150-4C NEWT $3,870.99 M12 200 44.8 1564 2,41800 445T 575 PE445T-150-4C-575V NEWT $4,301.10 M12 200 44.8 1564 2,41200 447T 460 PE447T-150-6C NEWT $5,589.41 M12 220 48.3 1575 2,41200 447T 575 PE447T-150-6C-575V NEWT $6,210.68 M12 220 48.3 1575 2,4900 449T 460 PE449T-150-8C NEWT $7,628.18 M12 220 53.3 1905 2,4900 449T 575 PE449T-150-8C-575V NEWT $8,475.84 M12 220 53.3 1905 2,4

200 3600 447TS 460 PE447TS-200-2-EC NEWT $6,405.48 M12 200 48.3 1902 2,43600 447TS 575 PE447TS-200-2-EC-575V NEWT $7,117.47 M12 200 48.3 1902 2,41800 447T 460 PE447T-200-4C NEWT $5,144.72 M12 200 48.3 1905 2,41800 447T 460 PE447T-200-4C-BB NEWT $5,144.72 M12 200 48.3 1905 2,4,81800 447T 460 PE447T-200-4C-PWS NEWT $5,144.72 M12 200 48.3 1905 2,4,61800 447TS 460 PE447TS-200-4C NEWT $5,144.72 M12 200 48.3 1905 2,41800 447T 575 PE447T-200-4C-575V NEWT $5,716.17 M12 200 48.3 1905 2,41200 449T 460 PE449T-200-6C NEWT $6,613.65 M12 230 53.3 2259 2,41200 449T 575 PE449T-20-6C-575V NEWT $7,348.32 M12 230 53.3 2259 2,4900 449T 460 PE449T-200-8C NEWT $8,575.47 M12 230 53.3 2720 2,4

250 3600 449TS 460 PE449TS-250-2-EC NEWT $7,871.18 M12 200 53.3 2245 2,43600 449TS 575 PE449TS-250-2-EC-575V NEWT $9,086.18 M12 200 53.3 2245 2,41800 449T 460 PE449T-250-4C NEWT $6,509.97 M12 200 53.3 2247 2,41800 449T 460 PE449T-250-4C-BB NEWT $6,509.97 M12 200 53.3 2247 2,4,81800 449T 460 PE449T-250-4C-PWS NEWT $6,509.97 M12 200 53.3 2247 2,4,61800 449TS 460 PE449TS-250-4C NEWT $6,509.97 M12 200 53.3 2247 2,41800 449T 575 PE449T-250-4C-575V NEWT $7,233.30 M12 200 53.3 2247 2,41200 449T 460 PE449T-250-6C NEWT $8,573.04 M12 230 53.3 2259 2,41200 449T 575 PE449T-250-6C-575V NEWT $9,525.60 M12 230 53.3 2259 2,41200 586/7UZ 460 PE587UZ-250-6C NC58 $10,666.61 M4 263 71.7 5258 2,4,61200 587U 460 PE587U-250-6C NC58 $10,128.89 M4 263 71.7 3616 2,4,61200 587U 460 PE587U-250-6C-BB NC58 $10,128.89 M4 263 71.7 3616 2,4,6,8900 586/7U 460 PE587U-250-8C NC58 $13,453.64 M4 226 71.7 5751 2,4,6

300 3600 449TS 460 PE449TS-300-2-EC NEWT $9,308.93 M12 210 53.3 2681 2,43600 449TS 575 PE449TS-300-2-EC-575V NEWT $9,894.56 M12 210 53.3 2681 2,41800 449T 460 PE449T-300-4C NEWT $8,832.24 M12 220 53.3 2685 2,41800 449T 460 PE449T-300-4C-BB NEWT $8,832.24 M12 220 53.3 2685 2,4,81800 449T 460 PE449T-300-4C-PWS NEWT $8,832.24 M12 220 53.3 2685 2,4,61800 449TS 460 PE449TS-300-4C NEWT $8,832.24 M12 220 53.3 2685 2,4,61800 449T 575 PE449T-300-4C-575V NEWT $11,789.15 M12 220 53.3 2685 2,4,61800 586/7UZ 460 PE587UZ-300-4C NC58 $10,954.80 M4 254 71.7 4662 2,4,6,71800 586/7U 460 PE587U-300-4C NC58 $10,453.60 M4 254 71.7 4662 2,4,61800 586/7U 460 PE587U-300-4C-BB NC58 $10,453.60 M4 254 71.7 4662 2,4,6,81200 449T 460 PE449T-300-6C NEWT $10,190.21 M12 230 53.3 2805 2,41200 449T 575 PE449T-300-6C-575V NEWT $11,322.59 M12 230 53.3 2805 2,41200 586/7UZ 460 PE587UZ-300-6C NC58 $11,635.00 M4 247 71.7 5384 2,4,6,71200 587U 460 PE587U-300-6C NC58 $11,169.60 M4 220 71.7 3880 2,4,61200 587U 460 PE587U-300-6C-BB NC58 $11,169.60 M4 220 71.7 3880 2,4,6,8900 586/7U 460 PE587U-300-8C NC58 $13,967.37 M4 218 71.7 6000 2,4,6

350 1800 586/7UZ 460 PE587UZ-350-4C NC58 $11,277.00 M4 270 71.7 4896 1,4,6,71800 586/7U 460 PE587U-350-4C NC58 $10,757.90 M4 270 71.7 4896 1,4,61800 586/7U 460 PE587U-350-4C-BB NC58 $10,757.90 M4 270 71.7 4896 1,4,6,81200 586/7UZ 460 PE587UZ-350-6C NC58 $12,816.40 M4 265 71.7 6000 1,4,6,71200 586/7U 460 PE587U-350-6C NC58 $12,207.80 M4 265 71.7 5751 1,4,61200 586/7U 460 PE587U-350-6C-BB NC58 $12,207.80 M4 265 71.7 5751 1,4,6,8


450 1800 586/7U 460 PE587U-450-4C NC58 $13,335.50 M4 270 71.7 5424 1,4,61200 586/7U 460 PE587U-450-6C NC58 $15,913.10 M4 265 71.7 6102 1,4,61200 586/7U 460 PE587U-450-6C-BB NC58 $15,913.10 M4 265 71.7 6102 1,4,6,8

500 1800 586/7UZ 460 PE587UZ-500-4C NC58 $15,392.57 M4 280 71.7 5744 1,4,6,71200 586/7UZ 460 PE587UZ-500-6C NC58 $18,240.10 M4 275 71.7 6253 1,4,6,7

600 1800 586/7UZ 460 PE587UZ-600-4C NC58 $17,896.78 M4 96.8 71.7 5924 1,4,6,7

Notes:1.) NEMA Premium ® (NEMA MG‐1 Table 12‐12)

2.) EISA Compliant (NEMA MG-1 Table 12-11)3.) Inverter Duty (20:1 Variable Torque; 10:1 Constant Torque)4.) Inverter Rated (10:1 Variable Torque; 5:1 Constant Torque)5.) 12 Lead Partwind Start at 230V6.) 12 Lead Partwind Start at 460V (575V for 575V Motors)7.) Equipped with Terminal Blocks as Standard8.) Ball Bearing on Drive End


EISA COMPLIANT - GENERAL PURPOSE MOTORSC-FLANGE W / FEETTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTION


APPLICATIONS:

General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed indamp, dusty or dirty environments.

FEATURES:

* Meets or exceeds EISA Efficiency Requirements * Corrosion resistant paint * Class I, Div II Groups ABCD, T2B * Stainless steel nameplate and zinc plated hardware * Suitable for wye-delta start on 213T frame and above * F1/F2 reversible * Dual voltage ratings suitable for part wind start on lower voltage * Feet are dual drilled on most frames for mounting flexibility * Single voltage ratings suitable for part wind start at 460V are noted * NEMA Design C performance * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * Cast iron frame construction including the conduit box * Suitable for 575V @ 1.0 Service Factor * D-Flange field conversion kits available * Inverter Rated (10:1 variable torque; 5:1 constant torque) * Lifting provisions on 143TC frame and above * Vacuum Pressure Impregnation for all windings * Condensation drains with plastic plugs * Sealed bearings thru 215T frame * IP55 Protection - Terminal box is sealed for IP66 protection * Regreasable open bearings 254T frame and above * CSA + C + US Certification * Class F insulation system, class B rise at full load * ISO 9001 Certification * 40° C ambient continuous duty

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143TC 208-230/460 PE143TC-1-4C NEWT $119.07 M12 85.5 12.5 55 1,2

1200 145TC 208-230/460 PE145TC-1-6C NEWT $165.65 M12 82.5 13.5 68 1,21.5 3600 143TC 208-230/460 PE143TC-1.5-2-EC NEWT $161.60 M12 84.0 12.5 60 1,2

1800 145TC 208-230/460 PE145TC-1.5-4C NEWT $146.61 M12 86.5 13.5 62 1,21200 182TC 208-230/460 PE182TC-1.5-6C NEWT $173.34 M12 87.5 15.3 90 1,2

2 3600 145TC 208-230/460 PE145TC-2-2-EC NEWT $175.77 M12 85.5 13.5 62 1,21800 145TC 208-230/460 PE145TC-2-4C NEWT $155.52 M12 86.5 13.5 64 1,21200 184TC 208-230/460 PE184TC-2-6C NEWT $229.64 M12 88.5 16.0 91 1,2



7.5 3600 213TC 208-230/460 PE213TC-7.5-2-EC NEWT $379.89 M12 89.5 19.0 157 1,21800 213TC 208-230/460 PE213TC-7.5-4C NEWT $307.80 M12 91.7 19.0 157 1,21200 254TC 208-230/460 PE254TC-7.5-6C NEWT $503.01 M12 91.0 23.4 260 1,2


15 3600 254TC 208-230/460 PE254TC-15-2-EC NEWT $622.89 M12 91.0 23.4 289 1,21800 254TC 208-230/460 PE254TC-15-4C NEWT $513.14 M12 92.4 23.4 289 1,2

20 3600 256TC 208-230/460 PE256TC-20-2-EC NEWT $784.89 M12 91.0 25.1 341 1,21800 256TC 208-230/460 PE256TC-20-4C NEWT $612.77 M12 93.0 25.1 341 1,2

25 1800 284TC 208-230/460 PE284TC-25-4C NEWT $798.66 M12 93.6 28.0 432 1,230 1800 286TC 208-230/460 PE286TC-30-4C NEWT $902.75 M12 93.6 29.5 474 1,240 1800 324TC 208-230/460 PE324TC-40-4C NEWT $1,159.52 M12 94.1 30.8 590 1,250 1800 326TC 208-230/460 PE326TC-50-4C NEWT $1,449.90 M12 94.5 31.8 683 1,260 1800 364TC 208-230/460 PE364TC-60-4C NEWT $1,915.65 M12 95.0 33.2 841 1,275 1800 365TC 208-230/460 PE365TC-75-4C NEWT $2,214.95 M12 95.4 34.2 941 1,2

100 1800 405TC 208-230/460 PE405TC-100-4C NEWT $2,814.75 M12 95.4 38.5 1172 1,2125 1800 444TC 460 PE444TC-125-4C NEWT $3,671.73 M12 95.4 42.8 1432 1150 1800 445TC 460 PE445TC-150-4C NEWT $4,032.18 M12 95.8 44.8 1564 1200 1800 447TC 460 PE447TC-200-4C NEWT $5,358.96 M12 95.8 48.3 1905 1250 1800 449TC 460 PE449TC-250-4C NEWT $6,988.28 M12 96.2 53.3 2247 1300 1800 449TC 460 PE449TC-300-4C NEWT $9,988.52 M12 96.2 53.3 2685 1

Notes:

1.) EISA Comliant (NEMA MG-1 Table 12-11) / Inverter Rated (10:1 Variable Torque; 5:1 Constant Torque)

2.) Ball Bearing on Drive End for Direct Drive Applications


NEMA PREMIUM EFFICIENCY - INVERTER DUTY MOTORSINVERTER DUTY (20:1 VT; 10:1 CT)THREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTION


APPLICATIONS:


FEATURES:

* Meets or exceeds NEMA Premium Efficiency Requirements * Corrosion resistant paint * Class I, Div II Groups ABCD, T2B * 40° C ambient continuous duty * Suitable for wye-delta start on 213T frame and above * Stainless steel nameplate and zinc plated hardware * Dual voltage ratings suitable for part wind start on lower voltage * F1/F2 reversible * Single voltage ratings suitable for part wind start at 460V are noted * Feet are dual drilled on most frames for mounting flexibility * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design B performance * Suitable for 575V @ 1.1 Service Factor * Cast iron frame construction including the conduit box * Inverter Duty (20:1 variable torque; 10:1 constant torque) * C-Flange and D-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Regreasable open bearings 254T frame and above * IP55 Protection - Terminal box is sealed for IP66 protection * Mechanical "V" Seal on drive end * CSA + C + US Certification * Class F insulation system, class B rise at full load * ISO 9001 Certification

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143T 208-230/460 PE143T-1-4 NEWT $147.42 M16 85.5 12.6 55 1,2,5

1800 143T 575V PE143T-1-4-575V NEWT $164.03 M16 85.5 12.6 55 1,2,51200 145T 208-230/460 PE145T-1-6 NEWT $196.43 M16 82.5 13.6 68 1,2,51200 145T 575 PE145T-1-6-575V NEWT $218.30 M16 82.5 13.6 68 1,2,5

1.5 3600 143T 208-230/460 PE143T-1.5-2 NEWT $168.08 M16 84.0 12.6 60 1,2,53600 143T 575 PE143T-1.5-2-575V NEWT $186.71 M16 84.0 12.6 60 1,2,51800 145T 208-230/460 PE145T-1.5-4 NEWT $180.23 M16 86.5 13.6 62 1,2,51800 145T 575 PE145T-1.5-4-575V NEWT $200.07 M16 86.5 13.6 62 1,2,51200 182T 208-230/460 PE182T-1.5-6 NEWT $211.01 M16 87.5 16.1 90 1,2,51200 182T 575 PE182T-1.5-6-575V NEWT $234.50 M16 87.5 16.1 90 1,2,5

2 3600 145T 208-230/460 PE145T-2-2 NEWT $180.63 M16 85.5 13.6 62 1,2,53600 145T 575 PE145T-2-2-575V NEWT $200.88 M16 85.5 13.6 62 1,2,51800 145T 208-230/460 PE145T-2-4 NEWT $187.11 M16 86.5 13.6 64 1,2,51800 145T 575 PE145T-2-4-575V NEWT $207.77 M16 86.5 13.6 64 1,2,51200 184T 208-230/460 PE184T-2-6 NEWT $248.27 M16 88.5 17.1 91 1,2,51200 184T 575 PE184T-2-6-575V NEWT $275.81 M16 88.5 17.1 91 1,2,5

3 3600 145T 208-230/460 PE145T-2-2 NEWT $222.35 M16 86.5 16.1 90 1,2,53600 182T 208-230/460 PE182T-3-2 NEWT $222.35 M16 86.5 16.1 90 1,2,53600 182T 575 PE182T-3-575V NEWT $247.46 M16 86.5 16.1 90 1,2,51800 182T 208-230/460 PE182T-3-4 NEWT $219.51 M16 89.5 16.1 90 1,2,51800 182T 575 PE182T-3-4-575V NEWT $243.81 M16 89.5 16.1 90 1,2,51200 213T 208-230/460 PE213T-3-6 NEPE $335.34 M16 89.5 18.9 143 1,2,51200 213T 575 PE213T-3-6-575V NEPE $372.60 M16 89.5 18.9 143 1,2,5

5 3600 184T 208-230/460 PE184T-5-2 NEWT $275.40 M16 88.5 17.1 106 1,2,53600 184T 575 PE184T-5-5-575V NEWT $306.18 M16 88.5 17.1 106 1,2,51800 184T 208-230/460 PE184T-5-4 NEWT $258.39 M16 89.5 17.1 106 1,2,51800 184T 575 PE184T-5-4-575V NEWT $287.15 M16 89.5 17.1 106 1,2,51200 215T 208-230/460 PE215T-5-6 NEPE $440.64 M16 89.5 20.4 163 1,2,51200 215T 575 PE215T-5-6-575V NEPE $489.65 M16 89.5 20.4 163 1,2,5

7.5 3600 184T 208-230/460 PE184T-7.5-2 NEWT $383.13 M16 89.5 18.9 157 1,2,53600 213T 208-230/460 PE213T-7.5-2 NEWT $383.13 M16 89.5 18.9 157 1,2,53600 213T 575 PE213T-7.5-2-575V NEWT $426.06 M16 89.5 18.9 157 1,2,51800 213T 208-230/460 PE213T-7.5-4 NEPE $373.41 M16 91.7 18.9 157 1,2,51800 213T 575 PE213T-7.5-4-575V NEPE $414.72 M16 91.7 18.9 157 1,2,51200 254T 208-230/460 PE254T-7.5-6 NEPE $606.29 M16 91.0 25.0 260 1,2,3,51200 254T 575 PE254T-7.5-6-575V NEPE $673.92 M16 91.0 25.0 260 1,2,3,5

10 3600 215T 208-230/460 PE215T-10-2 NEWT $431.73 M16 90.2 20.4 183 1,2,53600 215T 575 PE215T-10-2-575V NEWT $479.93 M16 90.2 20.4 183 1,2,51800 215T 208-230/460 PE215T-10-4 NEPE $448.74 M16 91.7 20.4 183 1,2,51800 215T 575 PE215T-10-4-575V NEPE $498.56 M16 91.7 20.4 183 1,2,51200 256T 208-230/460 PE256T-10-6 NEPE $768.29 M16 91.0 25.0 302 1,2,3,51200 256T 575 PE256T-10-6-575V NEPE $853.74 M16 91.0 25.0 302 1,2,3,5

15 3600 215T 208-230/460 PE215T-15-2 NEWT $634.23 M16 91.0 25.0 289 1,2,53600 254T 208-230/460 PE254T-15-2 NEWT $634.23 M16 91.0 25.0 289 1,2,3,53600 254T 575 PE254T-15-2-575V NEWT $704.70 M16 91.0 25.0 289 1,2,3,51800 254T 208-230/460 PE254T-15-4 NEPE $628.97 M16 92.4 25.0 289 1,2,3,51800 254T 575 PE254T-15-4-575V NEPE $699.03 M16 92.4 25.0 289 1,2,3,51200 284T 208-230/460 PE284T-15-6 NEWT $1,029.11 M16 91.7 28.1 392 1,2,3,51200 284T 575 PE284T-15-6-575V NEWT $1,143.72 M16 91.7 28.1 392 1,2,3,5

20 3600 256T 208-230/460 PE256T-20-2 NEWT $775.58 M16 91.0 25.0 341 1,2,3,53600 256T 575 PE256T-20-2-575V NEWT $861.84 M16 91.0 25.0 341 1,2,3,51800 256T 208-230/460 PE256T-20-4 NEPE $748.04 M16 93.0 25.0 341 1,2,3,51800 256T 575 PE256T-20-4-575V NEPE $831.47 M16 93.0 25.0 341 1,2,3,51200 286T 208-230/460 PE286T-20-6 NEWT $1,223.10 M16 91.7 28.1 454 1,2,3,51200 286T 575 PE286T-20-6-575V NEWT $1,359.18 M16 91.7 28.1 454 1,2,3,5

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES25 3600 256T 208-230/460 PE256T-25-2 NEWT $994.68 M16 91.7 25.0 432 1,2,3,5

3600 284T 208-230/460 PE284T-25-2 NEWT $994.68 M16 91.7 26.7 432 1,2,3,53600 284TS 208-230/460 PE284TS-25-2 NEWT $994.68 M16 91.7 26.7 432 1,2,3,53600 284TS 575 PE284TS-25-2-575V NEWT $1,104.84 M16 91.7 26.7 432 1,2,3,51800 284T 208-230/460 PE284T-25-4 NEWT $921.38 M16 93.6 28.1 432 1,2,3,51800 284T 575 PE284T-25-4-575V NEWT $1,023.84 M16 93.6 28.1 432 1,2,3,51200 324T 208-230/460 PE324T-25-6 NEWT $1,387.94 M16 93.0 31.3 541 1,2,3,51200 324T 575 PE324T-25-6-575V NEWT $1,541.84 M16 93.0 31.3 541 1,2,3,5

30 3600 286T 208-230/460 PE286T-30-2 NEWT $1,068.39 M16 91.7 26.7 474 1,2,3,53600 286TS 208-230/460 PE286TS-30-2 NEWT $1,068.39 M16 91.7 26.7 474 1,2,3,53600 286TS 575 PE286TS-30-2-575V NEWT $1,187.06 M16 91.7 26.7 474 1,2,3,51800 286T 208-230/460 PE286T-30-4 NEWT $1,074.06 M16 93.6 28.1 474 1,2,3,51800 286T 575 PE286T-30-4-575V NEWT $1,193.13 M16 93.6 28.1 474 1,2,3,51800 286TS 208-230/460 PE286TS-30-4 NEWT $1,074.06 M16 93.6 28.1 474 1,2,3,51200 326T 208-230/460 PE326T-30-6 NEWT $1,665.36 M16 93.0 31.8 597 1,2,3,51200 326T 575 PE326T-30-6-575V NEWT $1,850.45 M16 93.0 31.8 597 1,2,3,5

40 3600 286T 208-230/460 PE286T-40-2 NEWT $1,367.69 M16 92.4 29.8 590 1,2,3,53600 286TS 208-230/460 PE286TS-40-2 NEWT $1,367.69 M16 92.4 29.8 590 1,2,3,53600 324T 208-230/460 PE324T-40-2 NEWT $1,367.69 M16 92.4 29.8 590 1,2,3,53600 324TS 208-230/460 PE324TS-40-2 NEWT $1,367.69 M16 92.4 29.8 590 1,2,3,53600 324TS 575 PE324TS-4-2-575V NEWT $1,519.56 M16 92.4 29.8 590 1,2,3,51800 324T 208-230/460 PE324T-40-4 NEWT $1,437.75 M16 94.1 31.3 590 1,2,3,51800 324TS 208-230/460 PE324TS-40-4 NEWT $1,437.75 M16 94.1 31.3 590 1,2,3,51800 324T 575 PE324T-40-4-575V NEWT $1,597.73 M16 94.1 31.3 590 1,2,3,51200 364T 208-230/460 PE364T-40-6 NEPE $2,063.07 M16 94.1 33.5 786 1,2,3,51200 364T 575 PE364T-40-6-575V NEPE $2,292.30 M16 94.1 33.5 786 1,2,3,5

50 3600 326T 208-230/460 PE326T-50-2 NEWT $1,730.57 M16 93.0 29.8 683 1,2,3,53600 326TS 208-230/460 PE326TS-50-2 NEWT $1,730.57 M16 93.0 29.8 683 1,2,3,53600 326TS 575 PE326TS-50-2-575V NEWT $1,922.94 M16 93.0 29.8 683 1,2,3,51800 326T 208-230/460 PE326T-50-4 NEWT $1,725.71 M16 94.5 31.3 683 1,2,3,51800 326TS 208-230/460 PE326TS-50-4 NEWT $1,725.71 M16 94.5 31.3 683 1,2,3,51800 326T 575 PE326T-50-4-575V NEWT $1,917.27 M16 94.5 31.3 683 1,2,3,51200 365T 208-230/460 PE365T-50-6 NEPE $2,586.33 M16 94.1 33.5 863 1,2,3,51200 365T 575 PE365T-50-6-575V NEPE $2,873.88 M16 94.1 33.5 863 1,2,3,5

60 3600 364T 208-230/460 PE364T-60-2 NEWT $2,425.95 M16 93.6 31.4 841 1,2,3,53600 364TS 208-230/460 PE364TS-60-2 NEWT $2,425.95 M16 93.6 31.4 841 1,2,3,53600 364TS 575 PE364TS-60-2-575V NEWT $2,695.68 M16 93.6 31.4 841 1,2,3,51800 364T 208-230/460 PE364T-60-4 NEPE $2,318.22 M16 95.0 33.5 841 1,2,3,51800 364TS 208-230/460 PE364TS-60-4 NEPE $2,318.22 M16 95.0 33.5 841 1,2,3,51800 364T 575 PE364T-60-4-575V NEPE $2,575.80 M16 95.0 33.5 841 1,2,3,51200 404T 208-230/460 PE404T-60-6 NEPE $2,849.18 M16 94.5 38.2 1102 1,2,3,51200 404T 575 PE404T-60-6-575 NEPE $3,165.89 M16 94.5 38.2 1102 1,2,3,5

75 3600 365T 208-230/460 PE365T-75-2 NEWT $2,867.81 M16 93.6 31.4 941 1,2,3,53600 365TS 208-230/460 PE365TS-75-2 NEWT $2,867.81 M16 93.6 31.4 941 1,2,3,53600 365TS 575 PE365TS-75-2-575V NEWT $3,186.54 M16 93.6 31.4 941 1,2,3,51800 365T 208-230/460 PE365T-75-4 NEPE $2,634.93 M16 95.4 33.5 941 1,2,3,51800 365TS 208-230-460 PE365TS-75-4 NEPE $2,634.93 M16 95.4 33.5 941 1,2,3,51800 365T 575 PE365T-75-4-575V NEPE $2,927.75 M16 95.4 33.5 941 1,2,3,51200 405T 208-230/460 PE405T-75-6 NEPE $3,173.58 M16 94.5 38.2 1150 1,2,3,51200 405T 575 PE405T-75-6-575V NEPE $3,526.34 M16 94.5 38.2 1150 1,2,3,5

100 3600 405T 208-230/460 PE405T-100-2 NEWT $3,444.53 M16 94.1 35.2 1172 1,2,3,53600 405TS 208-230/460 PE405TS-100-2 NEWT $3,444.53 M16 94.1 35.2 1172 1,2,3,53600 405TS 575 PE405TS-100-2-575V NEWT $3,827.25 M16 94.1 35.2 1172 1,2,3,51800 405T 208-230/460 PE405T-100-4 NEPE $3,042.77 M16 95.4 38.2 1172 1,2,3,51800 405TS 208-230/460 PE405TS-100-4 NEPE $3,042.77 M16 95.4 38.2 1172 1,2,3,51800 405T 575 PE405T-100-4-575V NEPE $3,380.94 M16 95.4 38.2 1172 1,2,3,51200 444T 208-230/460 PE444T-100-6 NEPE $4,591.89 M16 95.0 44.3 1432 1,2,31200 444T 575 PE444T-100-6-575V NEPE $5,102.19 M16 95.0 44.3 1432 1,2,3

125 3600 444TS 460 PE444TS-125-2 NEWT $4,412.48 M16 95.0 40.6 1432 1,2,43600 444TS 575 PE444TS-125-2-575V NEWT $4,902.93 M16 95.0 40.6 1432 1,2,41800 444T 460 PE444T-125-4 NEPE $4,619.84 M16 95.4 44.3 1432 1,2,41800 444T 460 PE444T-125-4-BB NEPE $4,619.84 M16 95.4 44.3 1432 1,2,4,51800 444TS 460 PE444TS-125-4 NEPE $4,619.84 M16 95.4 44.3 1432 1,2,41800 444T 575 PE444T-125-4-575V NEPE $5,132.97 M16 95.4 44.3 1432 1,2,41200 445T 460 PE445T-125-6 NEPE $5,650.16 M16 95.0 44.3 1465 1,2,41200 445T 575 PE445T-125-6-575V NEPE $6,278.31 M16 95.0 44.3 1465 1,2,4

150 3600 445TS 460 PE445TS-150-2 NEPE $5,287.28 M16 95.0 44.1 1564 1,2,43600 445TS 575 PE445TS-150-2-575 NEPE $5,874.93 M16 95.0 44.1 1564 1,2,41800 445T 460 PE445T-150-4 NEPE $4,901.31 M16 95.8 44.3 1564 1,2,41800 445TS 460 PE445TS-150-4 NEPE $4,901.31 M16 95.8 44.3 1564 1,2,41800 445T 460 PE445T-150-4-BB NEPE $4,901.31 M16 95.8 44.3 1564 1,2,4,51800 445T 575 PE445T-150-4-575V NEPE $5,446.04 M16 95.8 44.3 1564 1,2,41200 447T 460 PE447T-150-6 NEPE $6,770.39 M16 95.8 47.8 1575 1,2,41200 447T 575 PE447T-150-6-575V NEPE $7,522.47 M16 95.8 47.8 1575 1,2,4

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES200 3600 447TS 460 PE447TS-200-2 NEPE $6,881.76 M16 95.4 44.1 1905 1,2,4

3600 447TS 575 PE447TS-200-2-575V NEPE $7,646.40 M16 95.4 44.1 1905 1,2,41800 447T 460 PE447T-200-4 NEPE $6,293.70 M16 96.2 47.8 1905 1,2,41800 447TS 460 PE447TS-200-4 NEPE $6,293.70 M16 96.2 47.8 1905 1,2,41800 447T 460 PE447T-200-4-BB NEPE $6,293.70 M16 96.2 47.8 1905 1,2,4,51800 447T 575 PE447T-200-4-575V NEPE $6,993.14 M16 96.2 47.8 1905 1,2,41200 449T 460 PE449T-200-6 NEPE $7,993.89 M16 95.8 52.8 2259 1,2,41200 449T 575 PE449T-200-6-575V NEPE $8,882.06 M16 95.8 52.8 2259 1,2,4

250 3600 449TS 460 PE449TS-250-2 NEPE $7,998.75 M16 95.8 49.1 2247 1,2,43600 449TS 575 PE449TS-250-2-575V NEPE $8,363.25 M16 95.8 49.1 2247 1,2,41800 449T 460 PE449T-250-4 NEPE $7,593.75 M16 96.2 52.8 2247 1,2,41800 449T 460 PE449T-250-4-BB NEPE $7,593.75 M16 96.2 52.8 2247 1,2,4,51800 449T 575 PE449T-250-4-575V NEPE $8,292.38 M16 96.2 52.8 2247 1,2,41200 449T 460 PE449T-250-6 NEPE $9,509.40 M16 95.4 52.8 2247 1,2,41200 449T 575 PE449T-250-6-575V NEPE $10,284.98 M16 95.4 52.8 22547 1,2,4

300 3600 449TS 460 PE449TS-300-2 NEPE $10,125.00 M16 95.8 49.1 2685 1,2,43600 449TS 575 PE449TS-300-2-575V NEPE $10,935.00 M16 95.8 49.1 2685 1,2,41800 449T 460 PE449T-300-4 NEPE $9,618.75 M16 96.2 52.8 2685 1,2,41800 449T 460 PE449T-300-4-BB NEPE $9,618.75 M16 96.2 52.8 2685 1,2,4,51800 449T 575 PE449T-300-4-575V NEPE $10,428.75 M16 96.2 52.8 2685 1,2,41200 449T 460 PE449T-300-6 NEPE $11,297.48 M16 95.4 52.8 4662 1,2,41200 449T 575 PE449T-300-6-575V NEPE $12,119.63 M16 95.4 52.8 4662 1,2,4

Notes:1.) NEMA Premium® (NEMA MG-1 Table 12-12)2.) Inverter Duty (20:1 Variable Torque; 10:1 Constant Torque)3.) 12 Lead Partwind Start at 230V4.) 12 Lead Partwind Start at 460V (575V for 575V Motors)5.) Ball Bearing on Drive End

NEMA PREMIUM EFFICIENCY - INVERTER DUTY MOTORSC-FLANGE W/ FEET or ROUND BODY (RB)INVERTER DUTY RATING: 20:1 VT; 10:1 CTTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTION



FEATURES:

* Meets or exceeds NEMA Premium Efficiency Requirements * Stainless steel nameplate and zinc plated hardware * Class I, Div II Groups ABCD, T2B * F1/F2 reversible * Suitable for wye-delta start on 213TC frame and above * Feet are dual drilled on most frames for mounting flexibility * Dual voltage ratings suitable for part wind start on lower voltage * NEMA Design B performance. * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * Cast iron frame construction including the conduit box * Inverter Duty (20:1 variable torque; 10:1 constant torque) * D-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143TC frame and above * Sealed bearings thru 215TC frame * Condensation drains with plastic plugs * Regreasable open bearings 254TC frame and above * IP55 Protection - Terminal box is sealed for IP66 protection * Ball bearings on Drive End as standard * CSA + C + US Certification * Class F insulation system, class B rise at full load * ISO 9001 Certification * 40° C ambient continuous duty * Corrosion resistant paint

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143TC 208-230/460 PE143TC-1-4 NEWT $154.71 M16 85.5 12.5 55 1

1800 143TC 208-230/460 PE143TC-1-4-RB NEWT $154.71 M16 85.5 12.5 55 11200 145TC 208-230/460 PE145TC-1-6 NEWT $206.15 M16 82.5 13.5 68 1

1.5 3600 143TC 208-230/460 PE143TC-1.5-2 NEWT $176.58 M16 84.0 12.5 60 11800 145TC 208-230/460 PE145TC-1.5-4 NEWT $189.14 M16 86.5 13.5 62 11800 145TC 208-230/460 PE145TC-1.5-4-RB NEWT $189.14 M16 86.5 13.5 62 11200 182TC 208-230/460 PE182TC-1.5-6 NEWT $221.54 M16 87.5 15.3 90 1

2 3600 145TC 208-230/460 PE145TC-2-2 NEWT $189.54 M16 85.5 13.5 62 11800 145TC 208-230/460 PE145TC-2-4 NEWT $196.43 M16 86.5 13.5 64 11800 145TC 208-230/460 PE145TC-2-4-RB NEWT $196.43 M16 86.5 13.5 64 11200 184TC 208-230/460 PE184TC-2-6 NEWT $260.82 M16 88.5 16.0 91 1

3 3600 182TC 208-230/460 PE182TC-3-2 NEWT $233.28 M16 86.5 15.3 90 11800 182TC 208-230/460 PE182TC-3-4 NEWT $230.45 M16 89.5 15.3 90 11800 182TC 208-230/460 PE182TC-3-4-RB NEWT $230.45 M16 89.5 15.3 90 11200 213TC 208-230/460 PE213TC-3-6 NEPE $351.95 M16 89.5 19.0 143 1

5 3600 184TC 208-230/460 PE184TC-5-2 NEWT $289.17 M16 88.5 16.0 106 11800 184TC 208-230/460 PE184TC-5-4 NEWT $271.35 M16 89.5 16.0 106 11800 184TC 208-230/460 PE184TC-5-4-RB NEWT $271.35 M16 89.5 16.0 106 11200 215TC 208-230/460 PE215TC-5-6 NEPE $462.51 M16 89.5 22.5 163 1

7.5 3600 213TC 208-230/460 PE213TC-7.5-2 NEWT $402.17 M16 89.5 19.0 157 11800 213TC 208-230/460 PE213TC-7.5-4 NEPE $392.04 M16 91.7 19.0 157 11800 213TC 208-230/460 PE213TC-7.5-4-RB NEPE $392.04 M16 91.7 19.0 157 11200 254TC 208-230/460 PE254TC-7.5-6 NEPE $636.66 M16 91.0 23.4 260 1

10 3600 215TC 208-230/460 PE215TC-10-2 NEWT $453.20 M16 90.2 22.5 183 11800 215TC 208-230/460 PE215TC-10-4 NEPE $471.02 M16 91.7 22.5 183 11800 215TC 208-230/460 PE215TC-10-4-RB NEPE $471.02 M16 91.7 22.5 183 11200 256TC 208-230/460 PE256TC-10-6 NEPE $806.76 M16 91.0 25.1 302 1

15 3600 254TC 208-230/460 PE254TC-15-2 NEPE $665.82 M16 91.0 23.4 289 11800 254TC 208-230/460 PE254TC-15-4 NEWT $660.56 M16 92.4 23.4 289 11800 254TC 208-230/460 PE254TC-15-4-RB NEWT $660.56 M16 92.4 23.4 289 1

20 3600 256TC 208-230/460 PE256TC-20-2 NEPE $814.46 M16 91.0 25.1 341 11800 256TC 208-230/460 PE256TC-20-4 NEWT $785.30 M16 93.0 25.1 341 11800 256TC 208-230/460 PE256TC-20-4-RB NEWT $785.30 M16 93.0 25.1 341 1

25 1800 284TC 208-230/460 PE284TC-25-4 NEWT $967.55 M16 93.6 28.0 432 11800 284TC 208-230/460 PE284TC-25-4-RB NEWT $967.55 M16 93.6 28.0 432 1

30 1800 286TC 208-230/460 PE286TC-30-4 NEWT $1,127.93 M16 93.6 29.5 474 11800 286TC 208-230/460 PE286TC-30-4-RB NEWT $1,127.93 M16 93.6 29.5 474 1

40 1800 324TC 208-230/460 PE324TC-40-4 NEWT $1,509.84 M16 94.1 30.8 590 150 1800 326TC 208-230/460 PE326TC-50-4 NEWT $1,811.97 M16 94.5 31.8 683 160 1800 364TC 208-230/460 PE364TC-60-4 NEPE $2,434.05 M16 95.0 33.2 841 175 1800 365TC 208-230/460 PE365TC-75-4 NEPE $2,766.56 M16 95.4 34.2 941 1

100 1800 405TC 208-230/460 PE405TC-100-4 NEPE $3,195.05 M16 95.4 38.5 1172 1125 1800 444TC 460 PE444TC-125-4 NEPE $4,850.69 M16 95.4 42.8 1432 1,2150 1800 445TC 460 PE445TC-150-4 NEPE $5,146.34 M16 95.8 44.8 1564 1,2200 1800 447TC 460 PE447TC-200-4 NEPE $6,608.39 M16 95.8 48.3 1905 1,2250 1800 449TC 460 PE449TC-250-4 NEPE $7,973.64 M16 96.2 53.3 2247 1,2300 1800 449TC 460 PE449TC-300-4 NEPE $10,099.89 M16 96.2 53.3 2685 1,2

Notes:1.) Ball Bearings on Drive End as Standard2.) 460V only3.) Round Body / No Feet


EISACOMPLIANT

PREMIUM CRUSHER DESIGNTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONNEMA DESIGN C - HIGH TORQUE



Special purpose use on crushing and pulverizing equipment and other industrial equipment requiring extremely high starting torques andbreakdown torques.

FEATURES:

* Meets or exceeds EISA Efficiency Requirements * Corrosion resistant paint * Class I, Div II Groups ABCD, T2B * Regreasable open bearings 254T frame and above * Suitable for wye-delta start on 213T frame and above * Stainless steel nameplate and zinc plated hardware * Dual voltage ratings suitable for part wind start on lower voltage * F1/F2 reversible * Single voltage ratings suitable for part wind start at 460V are noted * Feet are dual drilled on most frames for mounting flexibility * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design C performance * Suitable for 575V @ 1.0 Service Factor * Cast iron frame construction including the conduit box * Inverter Rated (10:1 variable torque; 5:1 constant torque) * C-Flange and D-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Mechanical "V" Seal on drive end * IP55 Protection - Terminal box is sealed for IP66 protection * Class F insulation system, class B rise at full load * CSA + C + US Certification * 40° C ambient continuous duty * ISO 9001 Certification

CATALOG FRAME NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES1 1800 143T 208-230/460 PE143T-1-4C NEWT $114.21 M12 320 12.5 55 2,4

1800 143T 575 PE143T-1-4C-575V NEWT $126.77 M12 320 12.5 55 2,41200 145T 208-230/460 PE145T-1-6C NEWT $158.76 M12 340 13.5 68 2,41200 145T 575 PE145T-1-6C-575V NEWT $167.27 M12 340 13.5 68 2,4900 182T 208-230/460 PE182T-1-8C NEWT $206.55 M12 320 15.3 64 2,4

1.5 1800 145T 208-230/460 PE145T-1.5-4C NEWT $140.94 M12 300 13.5 62 2,41800 145T 575 PE145T-1.5-4C-575V NEWT $157.14 M12 300 13.5 62 2,41200 182T 208-230/460 PE182T-1.5-6C NEWT $165.24 M12 320 15.3 90 2,41200 182T 575 PE182T-1.5-6C-575V NEWT $183.47 M12 320 15.3 90 2,4900 184T 208-230/460 PE184T-1.5-8C NEWT $257.18 M12 310 16.0 91 2,4

2 1800 145T 208-230/460 PE145T-2-4C NEWT $149.45 M12 280 13.5 64 2,41800 145T 575 PE145T-2-4C-575V NEWT $166.05 M12 280 13.5 64 2,41200 184T 208-230/460 PE184T-2-6C NEWT $218.70 M12 300 16.0 91 2,41200 184T 575 PE184T-2-6C-575V NEWT $243.41 M12 300 16.0 91 2,4900 213T 208-230/460 PE213T-2-8C NEWT $364.50 M12 340 19.0 145 2,4



7.5 1800 213T 208-230/460 PE213T-7.5-4C NEWT $295.25 M12 270 19.0 157 2,41800 213T 575 PE213T-7.5-4C-575V NEWT $328.05 M12 270 19.0 157 2,41200 254T 208-230/460 PE254T-7.5-6C NEWT $483.17 M12 240 23.4 260 2,41200 254T 575 PE254T-7.5-6C-575V NEWT $536.63 M12 240 23.4 260 2,4900 256T 208-230/460 PE256T-7.5-8C NEWT $672.30 M12 290 25.1 305 2,4

10 1800 215T 208-230/460 PE215T-10-4C NEWT $355.59 M12 265 22.5 183 2,41800 215T 575 PE215T-10-4C-575V NEWT $394.88 M12 265 22.5 183 2,41200 256T 208-230/460 PE256T-10-6C NEWT $656.91 M12 250 25.1 302 2,4,51200 256T 575 PE256T-10-6C-575V NEWT $730.22 M12 250 25.1 302 2,4900 284T 208-230/460 PE284T-10-8C NEWT $972.41 M12 250 28.0 395 2,4,5


CATALOG NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES15 1800 254T 208-230/460 PE254T-15-4C NEWT $492.48 M12 240 23.4 289 2,4,5

1800 254T 575 PE254T-15-4C-575V NEWT $547.16 M12 240 23.4 289 2,41200 284T 208-230/460 PE284T-15-6C NEWT $824.99 M12 240 28.0 392 2,4,51200 284T 575 PE284T-15-6C-575V NEWT $916.92 M12 240 28.0 392 2,4900 286T 208-230/460 PE286T-15-8C NEWT $1,258.34 M12 260 29.5 456 2,4,5

20 1800 256T 208-230/460 PE256T-20-4C NEWT $588.06 M12 230 25.1 341 2,4,51800 256T 575 PE256T-20-4C-575V NEWT $653.67 M12 230 25.1 341 2,41200 286T 208-230/460 PE286T-20-6C NEWT $1,029.11 M12 220 29.5 454 2,4,51200 286T 575 PE286T-20-6C-575V NEWT $1,143.72 M12 220 29.5 454 2,4900 324T 208-230/460 PE324T-20-8C NEWT $1,475.01 M12 250 30.3 547 2,4,5

25 1800 284T 208-230/460 PE284T-25-4C NEWT $803.12 M12 240 28.0 432 2,4,51800 284T 575 PE284T-25-4C-575V NEWT $851.72 M12 240 28.0 432 2,41200 324T 208-230/460 PE324T-25-6C NEWT $1,170.45 M12 220 30.3 541 2,4,51200 324T 575 PE324T-25-6C-575V NEWT $1,300.46 M12 220 30.3 541 2,4900 326T 208-230/460 PE326T-25-8C NEWT $1,656.86 M12 220 31.8 599 2,4,5

30 1800 286TS 575 PE286TS-30-2-EC-575V NEWT $1,499.72 M12 205 29.5 472 2,41800 286T 208-230/460 PE286T-30-4C NEWT $866.70 M12 250 29.5 474 2,4,51800 286T 575 PE286T-30-4C-575V NEWT $963.09 M12 250 29.5 474 2,41200 326T 208-230/460 PE326T-30-6C NEWT $1,374.17 M12 220 31.8 597 2,4,51200 326T 575 PE326T-30-6C-575V NEWT $1,526.85 M12 220 31.8 597 2,4900 364T 208-230/460 PE364T-30-8C NEWT $1,989.77 M12 200 33.2 789 2,4,5

40 1800 324T 208-230/460 PE324T-40-4C NEWT $1,112.94 M12 240 30.8 590 2,4,51800 324T 575 PE324T-40-4C-575V NEWT $1,236.47 M12 240 30.8 590 2,41200 364T 208-230/460 PE364T-40-6C NEWT $1,707.89 M12 200 33.2 786 2,4,51200 364T 575 PE364T-40-6C-575V NEWT $1,897.83 M12 200 33.2 786 2,4900 365T 208-230/460 PE365T-40-8C NEWT $2,433.65 M12 190 34.2 881 2,4,5


60 1800 364T 208-230/460 PE364T-60-2-EC NEWT $2,186.60 M12 200 33.2 839 2,4,51800 364T 208-230/460 PE364T-60-4C NEWT $1,838.70 M12 220 33.2 841 2,4,51800 364T 575 PE364T-60-4C-575V NEWT $2,043.23 M12 220 33.2 841 2,41200 404T 208-230/460 PE404T-60-6C NEWT $2,476.17 M12 230 37.0 1102 2,4,51200 404T 575 PE404T-60-6C-575V NEWT $2,751.17 M12 230 37.0 1102 2,4900 405T 208-230/460 PE405T-60-8C NEWT $3,314.12 M12 230 38.5 1057 2,4,5


100 1800 405T 208-230/460 PE405T-100-4C NEWT $2,702.16 M12 210 38.5 1172 2,4,51800 405T 575 PE405T-100-4C-575V NEWT $3,002.27 M12 210 38.5 1172 2,41200 444T 208-230/460 PE444T-100-6C NEWT $3,755.57 M12 220 42.8 1432 2,41200 444T 575 PE444T-100-6C-575V NEWT $4,172.72 M12 220 42.8 1432 2,4900 445T 208-230/460 PE445T-100-8C NEWT $5,215.19 M12 220 44.8 1465 2,4900 445T 575 PE445T-100-8C-575V NEWT $5,794.74 M12 220 44.8 1465 2,4

125 1800 444T 460 PE444T-125-4C NEWT $3,525.12 M12 220 42.8 1432 2,41800 444T 460 PE444T-125-4C-BB NEWT $3,525.12 M12 220 42.8 1432 2,4,81800 444T 460 PE444T-125-4C-PWS NEWT $3,525.12 M12 220 42.8 1432 2,4,61800 444T 575 PE444T-125-4C-575V NEWT $3,916.76 M12 220 42.8 1432 2,41200 445T 460 PE445T-125-6C NEWT $4,375.62 M12 220 44.8 1465 2,41200 445T 575 PE445T-125-6C-575V NEWT $4,862.03 M12 220 44.8 1465 2,4900 447T 460 PE447T-125-8C NEWT $6,700.73 M12 220 48.3 1575 2,4900 447T 575 PE447T-125-8C-575V NEWT $7,445.12 M12 220 48.3 1575 2,4

150 1800 445T 460 PE445T-150-4C NEWT $3,870.99 M12 200 44.8 1564 2,41800 445T 460 PE445T-150-4C-BB NEWT $3,870.99 M12 200 44.8 1564 2,4,81800 445T 460 PE445T-150-4C-PWS NEWT $3,870.99 M12 200 44.8 1564 2,4,61800 445T 575 PE445T-150-4C-575V NEWT $4,301.10 M12 200 44.8 1564 2,41200 447T 460 PE447T-150-6C NEWT $5,589.41 M12 220 48.3 1575 2,41200 447T 575 PE447T-150-6C-575V NEWT $6,210.68 M12 220 48.3 1575 2,4900 449T 460 PE449T-150-8C NEWT $7,628.18 M12 220 53.3 1905 2,4900 449T 575 PE449T-150-8C NEWT $8,475.84 M12 220 53.3 1905 2,4

200 1800 447T 460 PE447T-200-4C NEWT $5,144.72 M12 200 48.3 1905 2,41800 447T 460 PE447T-200-4C-BB NEWT $5,144.72 M12 200 48.3 1905 2,4,81800 447T 460 PE447T-200-4C-PWS NEWT $5,144.72 M12 200 48.3 1905 2,4,61800 447T 575 PE447T-200-4C-575V NEWT $5,716.17 M12 200 48.3 1905 2,41200 449T 460 PE449T-200-6C NEWT $6,613.65 M12 230 53.3 2259 2,41200 449T 575 PE449T-20-6C-575V NEWT $7,348.32 M12 230 53.3 2259 2,4900 449T 460 PE449T-200-8C NEWT $8,575.47 M12 230 53.3 2720 2,4


CATALOG NET MULT. BD "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. Torq % DIM. (LBS.) NOTES250 1800 449T 460 PE449T-250-4C NEWT $6,509.97 M12 200 53.3 2247 2,4

1800 449T 460 PE449T-250-4C-BB NEWT $6,509.97 M12 200 53.3 2247 2,4,81800 449T 460 PE449T-250-4C-PWS NEWT $6,509.97 M12 200 53.3 2247 2,4,61800 449T 575 PE449T-250-4C-575V NEWT $7,233.30 M12 200 53.3 2247 2,41200 449T 460 PE449T-250-6C NEWT $8,573.04 M12 230 53.3 2259 2,41200 449T 575 PE449T-250-6C-575V NEWT $9,525.60 M12 230 53.3 2259 2,41200 586/7UZ 460 PE587UZ-250-6C NC58 $10,666.61 M4 263 71.7 5258 2,4,61200 587U 460 PE587U-250-6C NC58 $10,128.89 M4 263 71.7 3616 2,4,61200 587U 460 PE587U-250-6C-BB NC58 $10,128.89 M4 263 71.7 3616 2,4,6,8900 586/7U 460 PE587U-250-8C NC58 $13,453.64 M4 226 71.7 5751 2,4,6

300 1800 449T 460 PE449T-300-4C NEWT $8,832.24 M12 220 53.3 2685 2,41800 449T 460 PE449T-300-4C-BB NEWT $8,832.24 M12 220 53.3 2685 2,4,81800 449T 460 PE449T-300-4C-PWS NEWT $8,832.24 M12 220 53.3 2685 2,4,61800 449T 575 PE449T-300-4C-575V NEWT $11,789.15 M12 220 53.3 2685 2,4,61800 586/7UZ 460 PE587UZ-300-4C NC58 $10,954.80 M4 254 71.7 4662 2,4,6,71800 586/7U 460 PE587U-300-4C NC58 $10,453.60 M4 254 71.7 4662 2,4,61800 586/7U 460 PE587U-300-4C-BB NC58 $10,453.60 M4 254 71.7 4662 2,4,6,81200 449T 460 PE449T-300-6C NEWT $10,190.21 M12 230 53.3 2805 2,41200 449T 575 PE449T-300-6C-575V NEWT $11,322.59 M12 230 53.3 2805 2,41200 586/7UZ 460 PE587UZ-300-6C NC58 $11,635.00 M4 247 71.7 5384 2,4,6,71200 587U 460 PE587U-300-6C NC58 $11,169.60 M4 220 71.7 3880 2,4,61200 587U 460 PE587U-300-6C-BB NC58 $11,169.60 M4 220 71.7 3880 2,4,6,8900 586/7U 460 PE587U-300-8C NC58 $13,967.37 M4 218 71.7 6000 2,4,6



450 1800 586/7U 460 PE587U-450-4C NC58 $13,335.50 M4 270 71.7 5424 1,4,61200 586/7U 460 PE587U-450-6C NC58 $15,913.10 M4 265 71.7 6102 1,4,61200 586/7U 460 PE587U-450-6C-BB NC58 $15,913.10 M4 265 71.7 6102 1,4,6,8

500 1800 586/7UZ 460 PE587UZ-500-4C NC58 $15,392.57 M4 280 71.7 5744 1,4,6,71200 586/7UZ 460 PE587UZ-500-6C NC58 $18,240.10 M4 275 71.7 6253 1,4,6,7

600 1800 586/7UZ 460 PE587UZ-600-4C NC58 $17,896.78 M4 96.8 71.7 5924 1,4,6,7

Notes:1.) NEMA Premium® (NEMA MG‐1 Table 12‐12)

2.) EISA Compliant (NEMA MG-1 Table 12-11)3.) Inverter Duty (20:1 Variable Torque; 10:1 Constant Torque)4.) Inverter Rated (10:1 Variable Torque; 5:1 Constant Torque)5.) 12 Lead Partwind Start at 230V6.) 12 Lead Partwind Start at 460V (575V for 575V Motors)7.) Equipped with Terminal Blocks as Standard8.) Ball Bearing on Drive End for Direct Drive Applications


EXPLOSION PROOF MOTORSNEMA PREMIUM EFFICIENCY®THREE PHASE, TEFC HOSTILE DUTY


General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed indamp, dusty or dirty environments. These motors are designed to be used in hazardous locations as defined by Class and Group.

FEATURES:

* Meets or exceeds NEMA Premium Efficiency® Standards * Regreasable open bearings 254T frame and above * Class I, Div I, Groups C & D and Class II, Div I, Groups E, F & G * Class F insulation system, class B rise at full load * Operating Temperature Code: TC3 * Corrosion resistant epoxy paint * Totally Enclosed Explosion Proof (TEXP) Enclosure * Stainless steel nameplate and zinc plated hardware * UL Listed * F1/F2 reversible * CSA + C + US Certification * Feet are dual drilled for mounting flexibility * ISO 9001 Certification * NEMA Design B performance * Suitable for wye-delta start on 213T frame and above * Cast iron frame construction including the conduit box * Dual voltage ratings suitable for part wind start on lower voltage * Severe Duty conversion kit available * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * C-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * IP55 Protection

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143T 208-230/460 PEXP143T-1-4 NEXP $306.28 M5 85.5 14.6" 70

1200 145T 208-230/460 PEXP145T-1-6 NEXP $330.06 M5 82.5 14.6" 711.5 3600 143T 208-230/460 PEXP143T-1.5-2 NEXP $312.33 M5 84.0 14.6" 71

1800 145T 208-230/460 PEXP145T-1.5-4 NEXP $334.49 M5 86.5 14.6" 721200 182T 208-230/460 PEXP182T-1.5-6 NEXP $369.55 M5 87.5 17.1" 113

2 3600 145T 208-230/460 PEXP145T-2-2 NEXP $350.21 M5 85.5 14.6" 751800 145T 208-230/460 PEXP145T-2-4 NEXP $369.55 M5 86.5 14.6" 741200 184T 208-230/460 PEXP184T-2-6 NEXP $468.29 M5 88.5 17.1" 123



7.5 3600 213T 208-230/460 PEXP213T-7.5-2 NEXP $628.68 M5 89.5 20.3" 2531800 213T 208-230/460 PEXP213T-7.5-4 NEXP $695.58 M5 71.7 20.3" 2711200 254T 208-230/460 PEXP254T-7.5-6 NEXP $797.54 M5 91.0 26.2" 353

10 3600 215T 208-230/460 PEXP215T-10-2 NEXP $727.01 M5 90.2 20.3" 2821800 215T 208-230/460 PEXP215T-10-4 NEXP $751.60 M5 91.7 20.3" 2731200 256T 208-230/460 PEXP256T-10-6 NEXP $1,022.81 M5 91.0 26.2" 370

15 3600 254T 208-230/460 PEXP254T-15-2 NEXP $1,017.58 M5 91.0 26.2" 3851800 254T 208-230/460 PEXP254T-15-4 NEXP $1,017.58 M5 92.4 26.2" 3931200 284T 208-230/460 PEXP284T-15-6 NEXP $1,218.67 M5 91.7 29.6 495

20 3600 256T 208-230/460 PEXP256T-20-2 NEXP $1,080.04 M5 91.0 26.2" 4291800 256T 208-230/460 PEXP256T-20-4 NEXP $1,123.97 M5 93.0 26.2" 4251200 286T 208-230/460 PEXP286T-20-6 NEXP $1,558.80 M5 91.7 29.6" 519

25 3600 284TS 208-230/460 PEXP284TS-25-2 NEXP $1,317.81 M5 91.7 28.2" 5061800 284T 208-230/460 PEXP284T-25-4 NEXP $1,383.90 M5 93.6 29.6" 5441200 324T 208-230/460 PEXP324T-25-6 NEXP $1,873.14 M5 93.0 33.3" 664





CATALOG NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES60 3600 364TS 208-230/460 PEXP364TS-60-2 NEXP $2,800.45 M5 93.6 33.3" 874

1800 364T 208-230/460 PEXP364T-60-4 NEXP $2,827.45 M5 95.0 35.5" 9681200 404T 208-230/460 PEXP404T-60-6 NEXP $4,041.69 M5 94.5 38.6" 1237



125 3600 444TS 460 PEXP444TS-125-2 NEXP $6,094.97 M5 95.0 41.8" 1636 11800 444T 460 PEXP444T-125-4 NEXP $5,930.15 M5 95.4 45.5" 1684 11200 445T 460 PEXP445T-125-6 NEXP $8,055.16 M5 95.0 45.5" 1775 1



250 3600 449TS 460 PEXP449TS-250-2 NEXP $15,716.60 M5 95.8 53.5" 2374 11800 449T 460 PEXP449T-250-4 NEXP $15,716.60 M5 96.2 57.3" 2595 1

Notes:1.) 460V only.


EXPLOSION PROOF MOTORSNEMA PREMIUM EFFICIENCY®THREE PHASE, TEFC HOSTILE DUTYC-FACE FOOTED


APPLICATIONS:

General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed indamp, dusty, or dirty environments. These motors are designed to be used in hazardous locations as defined by Class and Group.

FEATURES:

* Meets or exceeds NEMA Premium Efficiency® Standards * Regreasable open bearings 254T frame and above * Class I, Div I, Groups C & D and Class II, Div I, Groups E, F & G * Class F insulation system, class B rise at full load * Operating Temperature Code: TC3 * Corrosion resistant epoxy paint * Totally Enclosed Explosion Proof (TEXP) Enclosure * Stainless steel nameplate and zinc plated hardware * UL Listed * F1/F2 reversible * CSA + C + US Certification * Feet are dual drilled for mounting flexibility * ISO 9001 Certification * NEMA Design B performance * Suitable for wye-delta start on 213T frame and above * Cast iron frame construction including the conduit box * Dual voltage ratings suitable for part wind start on lower voltage * Severe Duty conversion kit available * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * C-Flange field conversion kits available * Vacuum Pressure Impregnation for all windings * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * IP55 Protection

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES2 1800 145TC 208-230/460 PEXP145TC-2-4 NEXP $384.87 M5 86.5 14.6" 743 3600 182TC 208-230/460 PEXP182TC-3-2 NEXP $429.60 M5 86.5 17.1" 1083 1800 182TC 208-230/460 PEXP182TC-3-4 NEXP $467.48 M5 89.5 17.1" 1215 3600 184TC 208-230/460 PEXP184TC-5-2 NEXP $567.02 M5 88.5 17.1" 1285 1800 184TC 208-230/460 PEXP184TC-5-4 NEXP $552.11 M5 89.5 17.1" 143

7.5 3600 213TC 208-230/460 PEXP213TC-7.5-2 NEXP $628.68 M5 89.5 20.3" 2507.5 1800 213TC 208-230/460 PEXP213TC-7.5-4 NEXP $724.59 M5 91.7 20.3" 27110 3600 215TC 208-230/460 PEXP215TC-10-2 NEXP $753.21 M5 90.2 20.3" 28210 1800 215TC 208-230/460 PEXP215TC-10-4 NEXP $783.03 M5 91.7 20.3" 27315 3600 254TC 208-230/460 PEXP254TC-15-2 NEXP $1,017.58 M5 91.0 26.2" 38015 1800 254TC 208-230/460 PEXP254TC-15-4 NEXP $1,060.29 M5 92.4 26.2" 39320 3600 256TC 208-230/460 PEXP256TC-20-2 NEXP $1,080.04 M5 91.0 26.2" 41020 1800 256TC 208-230/460 PEXP256TC-20-4 NEXP $1,170.72 M5 93.0 26.2" 42525 1800 284TC 208-230/460 PEXP284TC-25-4 NEXP $1,441.53 M5 93.6 29.6" 54430 1800 286TC 208-230/460 PEXP286TC-30-4 NEXP $1,579.36 M5 93.6 29.6" 57140 1800 324TC 208-230/460 PEXP324TC-40-4 NEXP $1,995.25 M5 94.1 33.3" 73450 1800 326TC 208-230/460 PEXP326TC-50-4 NEXP $2,384.55 M5 94.5 33.3" 76660 1800 364TC 208-230/460 PEXP364TC-60-4 NEXP $2,945.12 M5 95.0 35.5" 96875 1800 365TC 208-230/460 PEXP365TC-75-4 NEXP $3,530.68 M5 95.4 35.5" 1047100 1800 405TC 208-230/460 PEXP405TC-100-4 NEXP $4,703.82 M5 95.4 38.6" 1350125 1800 444TC 460 PEXP444TC-125-4 NEXP $6,177.18 M5 95.4 45.5" 1555150 1800 445TC 460 PEXP445TC-150-4 NEXP $9,484.61 M5 95.8 45.5" 1740200 1800 447TC 460 PEXP447TC-200-4 NEXP $10,787.91 M5 96.2 57.3" 1990

Note: The items listed above are standard stock items. All other ratings can be ordered from the factory. In order to determine your price for a C-Face, Footed Explosion Proof (NEXP) Series motor add 7% to the current net price of the equivelent Standard Mount Explosion Proof (NEXP) Series motor. Although lead times may vary the average lead time from the date an order is received by us is approximately 60-90 days. C-Flange conversion kits are also available from our stock for all Explosion Proof (NEXP) Series motors.


COMPRESSOR DUTYSINGLE PHASE, ODP

APPLICATIONS:


General purpose use on pumps, fans, conveyors, blowers, air compressors, refrigeration equipment, industrial equipment, millingmachines, tools, farm equipment, aereation equipment and other general purpose applications where contaminants are minimal.

FEATURES:

* High Efficiency Design * High starting torques * 1.15 Service Factor @ 60 hertz * NEMA Design B performance * Vacuum Pressure Impregnation for all windings * Rolled Steel frame construction; Cast Iron endbells * Sealed bearings * IP22 Protection as standard * Class B insulation system, class B rise at full load * CSA + C + US Certification * 40° C ambient continuous duty * Meets or exceeds NRCan efficiency requirements * Stainless steel nameplate and zinc plated hardware * ISO 9001 Certification * Feet are dual drilled for mounting flexibility


HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM EFF % DIM. (LBS.) NOTES3 1800 182T 208-230 D182T3S4C SODP $230.30 M9 72.5 15.8 745 1800 184T 208-230 D184T5S4C SODP $258.03 M9 82.5 15.8 90


FARM DUTY MOTORSSINGLE PHASE, GENERAL PURPOSETOTALLY ENCLOSED FAN COOLED

APPLICATIONS: NET PRICING M1 0.377NET PRICING M10 0.407

General purpose use on pumps, fans, conveyors, poultry equipment, air compressors and other farm duty machinery requiring high startingtorques.

FEATURES:

* Totally Enclosed Fan Cooled * Class F insulation system, class B rise at full load * High Starting Torques * Vacuum Pressure Impregnation for windings * Manual Overload Protection (1/3HP thru 5HP) * Corrosion resistant epoxy paint * Capacitor Start / Capacitor Run Design * Stainless steel nameplate and zinc plated hardware * Rolled Steel Frames * C-Flange field conversion kits available * Double shielded bearings * Lifting provisions on 182T and above


HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1/3 1800 56C 115/208-230 F56C1/3S4C-MO 56FD $103.68 M1 65.0 12.6 23 11/2 1800 56C 115/208-230 F56C1/2S4C-MO 56FD $107.45 M1 72.0 12.6 25 13/4 1800 56C 115/208-230 F56C3/4S4C-MO 56FD $114.99 M1 73.5 12.6 29 11 1800 56C 115/208-230 F56C1S4C-MO 56FD $130.07 M1 74.0 12.6 38 1

1800 143T 115/208-230 F143T1S4C-MO NEFD $146.52 M10 74.0 14.4 361.5 1800 56CH 115/208-230 F56CH1.5S4C-MO 56FD $152.31 M1 77.0 14.2 42 1

1800 145T 115/208-230 F145T1.5S4C-MO NEFD $166.87 M10 77.0 14.4 402 1800 56CH 115/208-230 F56CH2S4C-MO 56FD $174.93 M1 76.5 14.2 47 1

1800 145T 115/208-230 F145T2S4C-MO NEFD $195.36 M10 79.0 14.4 473 1800 182T 208-230/460 F182T3S4C-MO NEFD $268.62 M10 82.5 18.5 925 1800 184T 208-230/460 F184T5S4C-MO NEFD $319.50 M10 81.0 18.5 110

7.5 1800 213T 208-230/460 F213T7.5S4C NEFD $463.98 M10 87.0 21.0 153 210 1800 215T 208-230/460 F215T10S4C NEFD $559.63 M10 89.0 22.0 190 2

Note:1.) Removable Feet2.) Does not have manual overload protection


STAINLESS STEEL / WASHDOW DUTY MOTORSTHREE PHASE, TEFCRIGID BASE - C-FACE WITH FEET1/3 HP - 20 HP


Specifically designed for food processing, pharmaceutical and other environments requiring extreme cleanliness and frequent washdowns.Applications includes washdown applications, food processing, chemical processing, pharmaceuticals, poultry processing, meatprocessing, dariy applications, bakeries, snack foods, bottling and extremely corrosive environments.

FEATURES:

* High Efficiency Design * NEMA Design B performance * All Stainless Steel Construction * High starting torques * IP67 Protections as standard * 40° C ambient continuous duty * Inverter Duty (20:1 VT; 10:1 CT) * C-Flange as standard * Vacuum Pressure Impregnation for all windings * Meets or exceeds NRCan efficiency requirements * Double sealed bearings in both ends * ISO 9001 Certification * Class F insulation system, class B rise at full load * CSA + C + US Certification * 1.15 Service Factor @ 60 hertz * UL Listed

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1/3 1800 56C 208-230/460 SS56C1/3M-4 NESS $190.92 M18 82.5 11.6 281/2 3600 56C 208-230/460 SS56C1/2M-2 NESS $194.36 M18 77.0 11.6 26

1800 56C 208-230/460 SS56C1/2M-4 NESS $197.80 M18 82.5 11.6 291200 56C 208-230/460 SS56C1/2M-6 NESS $206.40 M18 77.0 12.6 32

3/4 3600 56C 208-230/460 SS56C3/4M-2 NESS $199.18 M18 80.0 12.6 281800 56C 208-230/460 SS56C3/4M-4 NESS $211.56 M18 82.5 12.6 311200 56C 208-230/460 SS56C3/4M-6 NESS $223.60 M18 80.0 12.6 351200 143TC 208-230/460 SS143TC3/4M-6 NESS $223.60 M18 80.0 12.7 41

1 3600 56C 208-230/460 SS56C1M-2 NESS $209.50 M18 80.0 12.6 281800 56C 208-230/460 SS56C1M-4 NESS $215.00 M18 84.0 12.6 361800 143TC 208-230/460 SS143TC1M-4 NESS $232.20 M18 84.0 13.9 391200 145TC 208-230/460 SS145TC1M-6 NESS $249.40 M18 80.0 12.7 44

1.5 3600 56C 208-230/460 SS56C1.5M-2 NESS $237.02 M18 84.0 12.6 283600 143TC 208-230/460 SS143TC-1.5-2 NESS $226.70 M18 84.0 12.7 311800 56C 208-230/460 SS56C1.5M-4 NESS $240.46 M18 84.0 12.6 391800 145TC 208-230/460 SS145TC1.5M-4 NESS $232.20 M18 84.0 12.7 411200 182TC 208-230/460 SS182TC1.5M-6 NESS $447.20 M18 85.5 15.3 89

2 3600 56C 208-230/460 SS56C2M-2 NESS $252.84 M18 84.0 13.8 313600 145TC 208-230/460 SS145TC2M-2 NESS $240.46 M18 84.0 13.9 351800 56C 208-230/460 SS56C2M-4 NESS $254.22 M18 84.0 13.8 481800 145TC 208-230/460 SS145TC2M-4 NESS $263.16 M18 84.0 13.9 511200 184TC 208-230/460 SS184TC2M-6 NESS $481.60 M18 86.5 16.0 92

3 3600 182TC 208-230/460 SS182TC3M-2 NESS $567.60 M18 85.5 15.3 901800 182TC 208-230/460 SS182TC3M-4 NESS $550.40 M18 87.5 15.3 901200 213TC 208-230/460 SS213TC3M-6 NESS $756.80 M18 87.5 19.0 109

5 3600 184TC 208-230/460 SS184TC5M-2 NESS $614.04 M18 87.5 16.0 921800 184TC 208-230/460 SS184TC5M-4 NESS $636.40 M18 87.5 16.0 921200 215TC 208-230/460 SS215TC5M-6 NESS $885.80 M18 87.5 22.5 112

7.5 3600 213TC 208-230/460 SS213TC7.5M-2 NESS $946.00 M18 88.5 19.0 1101800 213TC 208-230/460 SS213TC7.5M-4 NESS $928.80 M18 89.5 19.0 1101200 254TC 208-230/460 SS254TC7.5M-6 NESS $1,651.20 M18 89.5 23.4 205

10 3600 215TC 208-230/460 SS215TC10M-2 NESS $997.60 M18 89.5 22.5 1101800 215TC 208-230/460 SS215TC10M-4 NESS $1,014.80 M18 89.5 22.5 1101200 256TC 208-230/460 SS256TC10M-6 NESS $1,754.40 M18 89.5 25.1 213

15 3600 254TC 208-230/460 SS254TC15M-2 NESS $2,132.80 M18 90.2 23.4 2091800 254TC 208-230/460 SS254TC15M-4 NESS $2,132.80 M18 91.0 23.4 211

20 3600 256TC 208-230/460 SS256TC20M-2 NESS $2,339.20 M18 90.2 25.1 2221800 256TC 208-230/460 SS256TC20M-4 NESS $2,339.20 M18 91.0 25.1 219


STAINLESS STEEL / WASHDOWN DUTY MOTORS THREE PHASE, TEFCROUND BODY - (FOOTLESS W/ C-FACE)1/3 HP - 20 HP


Specifically designed for food processing, pharmaceutical and other environments requiring extreme cleanliness and frequent washdowns.Applications includes washdown applications, food processing, chemical processing, pharmaceuticals, poultry processing, meatprocessing, dariy applications, bakeries, snack foods, bottling and extremely corrosive environments.

FEATURES:

* High Efficiency Design * NEMA Design B performance * All Stainless Steel Construction * High starting torques * IP67 Protections as standard * 40° C ambient continuous duty * Inverter Duty (20:1 VT; 10:1 CT) * C-Flange as standard * Vacuum Pressure Impregnation for all windings * Meets or exceeds NRCan efficiency requirements * Double sealed bearings in both ends * ISO 9001 Certification * Class F insulation system, class B rise at full load * CSA + C + US Certification * 1.15 Service Factor @ 60 hertz * UL Listed

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1/3 1800 56C 208-230/460 SS56C1/3M-4-RB NESS $185.07 M18 82.5 11.6 281/2 3600 56C 208-230/460 SS56C1/2M-2-RB NESS $188.51 M18 77.0 11.6 26

1800 56C 208-230/460 SS56C1/2M-4-RB NESS $191.95 M18 82.5 11.6 291200 56C 208-230/460 SS56C1/2M-6-RB NESS $200.21 M18 77.0 12.6 32

3/4 3600 56C 208-230/460 SS56C3/4M-2-RB NESS $193.33 M18 80.0 12.6 281800 56C 208-230/460 SS56C3/4M-4-RB NESS $205.37 M18 82.5 12.6 311200 56C 208-230/460 SS56C3/4M-6-RB NESS $217.06 M18 80.0 12.6 351200 143TC 208-230/460 SS143TC3/4M-6-RB NESS $217.06 M18 80.0 12.7 41

1 3600 56C 208-230/460 SS56C1M-2-RB NESS $203.30 M18 80.0 12.6 281800 56C 208-230/460 SS56C1M-4-RB NESS $208.46 M18 84.0 12.6 361800 143TC 208-230/460 SS143TC1M-4-RB NESS $225.32 M18 84.0 13.9 391200 145TC 208-230/460 SS145TC1M-6-RB NESS $241.83 M18 80.0 12.7 44

1.5 3600 56C 208-230/460 SS56C1.5M-2-RB NESS $229.79 M18 84.0 12.6 283600 143TC 208-230/460 SS143TC1.5M-2-RB NESS $219.82 M18 84.0 12.7 311800 56C 208-230/460 SS56C1.5M-4-RB NESS $233.23 M18 84.0 12.6 391800 145TC 208-230/460 SS145TC1.5M-4-RB NESS $225.32 M18 84.0 12.7 411200 182TC 208-230/460 SS182TC1.5M-6-RB NESS $433.78 M18 85.5 15.3 89

2 3600 56C 208-230/460 SS56C2M-2-RB NESS $245.27 M18 84.0 13.8 313600 145TC 208-230/460 SS145TC2M-2-RB NESS $233.23 M18 84.0 13.9 351800 56C 208-230/460 SS56C2M-4-RB NESS $246.65 M18 84.0 13.8 481800 145TC 208-230/460 SS145TC2M-4-RB NESS $255.25 M18 84.0 13.9 511200 184TC 208-230/460 SS184TC2M-6-RB NESS $467.15 M18 86.5 16.0 92

3 3600 182TC 208-230/460 SS182TC3M-2-RB NESS $550.74 M18 85.5 15.3 901800 182TC 208-230/460 SS182TC3M-4-RB NESS $533.89 M18 87.5 15.3 901200 213TC 208-230/460 SS213TC3M-6-RB NESS $734.10 M18 87.5 19.0 109

5 3600 184TC 208-230/460 SS184TC5M-2-RB NESS $595.46 M18 87.5 16.0 921800 184TC 208-230/460 SS184TC5M-4-RB NESS $617.48 M18 87.5 16.0 921200 215TC 208-230/460 SS215TC5M-6-RB NESS $859.31 M18 87.5 22.5 112

7.5 3600 213TC 208-230/460 SS213TC7.5M-2-RB NESS $917.79 M18 88.5 19.0 1101800 213TC 208-230/460 SS213TC7.5M-4-RB NESS $900.94 M18 89.5 19.0 1101200 254TC 208-230/460 SS254TC5M-6-RB NESS $1,601.66 M18 89.5 23.4 205

10 3600 215TC 208-230/460 SS215TC10M-2-RB NESS $967.67 M18 89.5 22.5 1101800 215TC 208-230/460 SS215TC10M-4-RB NESS $984.53 M18 89.5 22.5 1101200 256TC 208-230/460 SS256TC10M-6-RB NESS $1,751.99 M18 89.5 25.1 213

15 3600 254TC 208-230/460 SS254TC15M-2-RB NESS $2,068.82 M18 90.2 23.4 2091800 254TC 208-230/460 SS254TC15M-4-RB NESS $2,068.82 M18 91.0 23.4 211

20 3600 256TC 208-230/460 SS256TC20M-2-RB NESS $2,269.02 M18 90.2 25.1 2221800 256TC 208-230/460 SS256TC20M-4-RB NESS $2,269.02 M18 91.0 25.1 219


SPECIAL PURPOSEOIL WELL PUMP MOTORSTHREE PHASE, TEFC HOSTILE DUTYNEMA DESIGN DHIGH TORQUE/HIGH SLIP (5 - 8%)


Designed specifically for use on Oil Well Pumping Units.

FEATURES:

* Meets or exceeds NEMA Design D performance standards * Class F insulation system, class B rise at full load * High Torque/High Slip (5 - 8%) * Class H, spike resistant wire used for windings * Inverter Rated (10:1 Variable Torque; 5:1 Constant Torque) * 40° C ambient * TEFC Enclosure * Corrosion resistant epoxy paint * Vacuum Pressure Impregnation for windings 254T frame and above * Stainless steel nameplate and zinc plated hardware * Thermisters in the windings * Cast iron frame construction including the conduit box * Double shielded bearings thru 215T frame * Lifting provisions on 213T frame and above * Regreasable open bearings 254T frame and above * IP55 Protection - Terminal box is sealed for IP66 protection * Mechanical "V" seal on both ends for 254T frame and above


HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES3 1200 213T 230/460/796 OWP12-3 NEWT $309.19 M6 82.4 20.9" 1705 1200 215T 230/460/796 OWP12-5 NEWT $365.93 M6 80.8 20.9" 205

7.5 1200 254T 230/460/796 OWP12-7.5 NEWT $458.18 M6 79.2 26.2" 34210 1200 256T 230/460/796 OWP12-10 NEWT $623.78 M6 81.5 26.2" 36815 1200 284T 230/460/796 OWP12-15 NEWT $783.97 M6 84.8 29.6" 48720 1200 286T 230/460/796 OWP12-20 NEWT $962.68 M6 84.6 29.6" 51825 1200 324T 230/460/796 OWP12-25 NEWT $1,125.58 M6 86.7 33.3" 58930 1200 326T 230/460/796 OWP12-30 NEWT $1,334.02 M6 86.7 33.3" 67540 1200 365T 230/460/796 OWP12-40 NEWT $1,803.78 M6 86.0 35.3" 88450 1200 404T 230/460/796 OWP12-50 NEWT $2,123.00 M6 87.4 40.0" 90260 1200 405T 230/460/796 OWP12-60 NEWT $2,150.41 M6 87.1 40.0" 130075 1200 444T 460/796 OWP12-75 NEWT $3,110.39 M6 89.3 47.3" 1724100 1200 445T 460/796 OWP12-100 NEWT $3,854.21 M6 89.6 47.3" 1841125 1200 447T 460/796 OWP12-125 NEH $5,404.00 M6 86.7 55.8" 2367150 1200 449T 460/796 OWP12-150 NEH $6,870.80 M6 87.0 55.8" 2539200 1200 449T 460 OWP12-200 NEH $9,843.00 M6 87.2 55.8" 2748 1

Notes:1.) 460V only.


OIL WELL PUMP MOTORSTHREE PHASE, OPEN DRIP PROOF NEMA DESIGN DHIGH TORQUE/HIGH SLIP (5 - 8%)


Designed specifically for use on Oil Well Pumping Units.

FEATURES:

* Meets or exceeds NEMA Design D performance standards * Class F insulation system, class B rise at full load * High Torque/High Slip (5 - 8%) * Class H, spike resistant wire used for windings * Inverter Rated (10:1 Variable Torque; 5:1 Constant Torque) * 40° C ambient * Open Drip Proof * Corrosion resistant epoxy paint * Vacuum Pressure Impregnation for windings 254T frame and above * Stainless steel nameplate and zinc plated hardware * Thermisters in the windings * Cast iron frame construction including the conduit box * Double shielded bearings thru 215T frame * Lifting provisions on 213T frame and above * Regreasable open bearings 254T frame and above * IP 22 Protection * Mechanical Oil Seal on both ends for 254T frame and above

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES7.5 1200 254T 230/460/796 OWP12-7.5-ODP NEWT $412.25 M6 79.2 26.2" 24010 1200 256T 230/460/796 OWP12-10-ODP NEWT $561.24 M6 81.5 26.2" 25715 1200 284T 230/460/796 OWP12-15-ODP NEWT $705.22 M6 84.8 29.6" 34120 1200 286T 230/460/796 OWP12-20-ODP NEWT $866.18 M6 84.6 29.6" 36325 1200 324T 230/460/796 OWP12-25-ODP NEWT $1,012.86 M6 86.7 33.3" 41330 1200 326T 230/460/796 OWP12-30-ODP NEWT $1,200.46 M6 86.7 33.3" 47340 1200 365T 230/460/796 OWP12-40-ODP NEWT $1,623.13 M6 86.0 35.3" 61950 1200 404T 230/460/796 OWP12-50-ODP NEWT $1,910.70 M6 87.4 31.1" 631


SPECIAL PURPOSE CLOSE-COUPLED PUMP MOTORSJM FRAMESTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONHIGH EFFICIENCY DESIGN - EISA COMPLIANT


Specifically designed for use on industrial and commercial pumping units.

FEATURES:

* Meets or exceeds EPACT '92 and NRCan efficiency requirements * Stainless steel nameplate and zinc plated hardware * Suitable for wye-delta start on 213JM frame and above * F1/F2 reversible * Dual voltage ratings suitable for part wind start on lower voltage * Feet are dual drilled on most frames for mounting flexibility * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design B performance 143JM through 326JM * Vacuum Pressure Impregnation for all windings * Cast iron frame construction including the conduit box * Sealed bearings thru 215JM frame * Lifting provisions on 143JM frame and above * Regreasable open bearings 254JM frame and above * Condensation drains with plastic plugs * Class F insulation system, class B rise at full load * IP55 Protection - Terminal box is sealed for IP66 protection * 40° C ambient continuous duty * CSA + C + US Certification * Corrosion resistant paint * ISO 9001 Certification

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143JM 208-230/460 NA143JM-1-4 NEJM $126.74 M17 82.5 15.2 43

1.5 3600 143JM 208-230/460 NA143JM-1.5-2 NEJM $137.80 M17 82.5 15.2 441800 145JM 208-230/460 NA145JM-1.5-4 NEJM $142.09 M17 84.0 16.2 51

2 3600 145JM 208-230/460 NA145JM-2-2 NEJM $148.16 M17 84.0 16.2 511800 145JM 208-230/460 NA145JM-2-4 NEJM $147.80 M17 84.0 16.2 53

3 3600 145JM 208-230/460 NA145JM-3-2 NEJM $179.21 M17 85.5 16.2 553600 182JM 208-230/460 NA182JM-3-2 NEJM $179.21 M17 85.5 17.5 841800 182JM 208-230/460 NA182JM-3-4 NEJM $188.50 M17 87.5 17.5 75


7.5 3600 184JM 208-230/460 NA184JM-7.5-2 NEJM $307.73 M17 88.5 18.5 1063600 213JM 208-230/460 NA213JM-7.5-2 NEJM $307.73 M17 88.5 20.8 1401800 213JM 208-230/460 NA213JM-7.5-4 NEJM $320.94 M17 89.5 20.8 139






40 3600 286JM 208-230/460 NA286JM-40-2 NEJM $1,059.58 M17 91.7 29.1 4313600 324JM 208-230/460 NA324JM-40-2 NEJM $1,059.58 M17 91.7 30.0 4931800 324JM 208-230/460 NA324JM-40-4 NEJM $1,075.28 M17 93.0 30.0 519

50 3600 326JM 208-230/460 NA326JM-50-2 NEJM $1,324.47 M17 92.4 31.5 5431800 326JM 208-230/460 NA326JM-50-4 NEJM $1,336.97 M17 93.0 31.5 570


SPECIAL PURPOSE CLOSE-COUPLED PUMP MOTORSJP FRAMESTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONHIGH EFFICIENCY DESIGN - EISA COMPLIANT


Specifically designed for use on industrial and commercial pumping units.

FEATURES:

* Meets or exceeds EPACT '92 and NRCan efficiency requirements * Stainless steel nameplate and zinc plated hardware * Suitable for wye-delta start on 213JP frame and above * F1/F2 reversible * Dual voltage ratings suitable for part wind start on lower voltage * Feet are dual drilled on most frames for mounting flexibility * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design B performance 143JP through 326JP * Vacuum Pressure Impregnation for all windings * Cast iron frame construction including the conduit box * Sealed bearings thru 215JP frame * Lifting provisions on 143JP frame and above * Regreasable open bearings 254JP frame and above * Condensation drains with plastic plugs * Class F insulation system, class B rise at full load * IP55 Protection - Terminal box is sealed for IP66 protection * 40° C ambient continuous duty * CSA + C + US Certification * Corrosion resistant paint * ISO 9001 Certification

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES1 1800 143JP 208-230/460 NA143JP-1-4 NEJP $126.74 M17 82.5 18.3 43

1.5 3600 143JP 208-230/460 NA143JP-1.5-2 NEJP $137.80 M17 82.5 18.3 441800 145JP 208-230/460 NA145JP-1.5-4 NEJP $142.09 M17 84.0 19.3 51

2 3600 145JP 208-230/460 NA145JP-2-2 NEJP $148.16 M17 84.0 19.3 511800 145JP 208-230/460 NA145JP-2-4 NEJP $147.80 M17 84.0 19.3 53

3 3600 145JP 208-230/460 NA145JP-3-2 NEJP $179.21 M17 85.5 19.3 553600 182JP 208-230/460 NA182JP-3-2 NEJP $179.21 M17 85.5 20.6 841800 182JP 208-230/460 NA182JP-3-4 NEJP $188.50 M17 87.5 20.6 75


7.5 3600 184JP 208-230/460 NA184JP-7.5-2 NEJP $307.73 M17 88.5 21.6 1063600 213JP 208-230/460 NA213JP-7.5-2 NEJP $307.73 M17 88.5 24.7 1401800 213JP 208-230/460 NA213JP-7.5-4 NEJP $320.94 M17 89.5 24.7 139






40 3600 286JP 208-230/460 NA286JP-40-2 NEJP $1,059.58 M17 91.7 32.0 4313600 324JP 208-230/460 NA324JP-40-2 NEJP $1,059.58 M17 91.7 32.9 4931800 324JP 208-230/460 NA324JP-40-4 NEJP $1,075.28 M17 93.0 32.9 519

50 3600 326JP 208-230/460 NA326JP-50-2 NEJP $1,324.47 M17 92.4 34.4 5431800 326JP 208-230/460 NA326JP-50-4 NEJP $1,336.97 M17 93.0 34.4 570


COUPLING INCLUDEDIN PRICE!

VERTICAL HOLLOW SHAFT MOTORSHIGH THRUST DESIGNCAST IRON CONSTRUCTIONOPEN DRIPPROOF (WP-1) ENCLOSURE

NET PRICING M15 0.321APPLICATIONS: NET PRICING M20 0.344

Designed primarily for deep well turbine pump applications. The coupling is equipped with a non-reverse ratchet, which prevents motor rotationfrom backspin at shutdown. These motors are built to NEMA standards and have special bearing arrangements to carry heavy thrust loads.

FEATURES:

* Meets or exceeds NEMA performance standards * Class B Temperature Rise @ 1.15 Service Factor * Three Phase, 60 Hz * Oversized angular contact bearing and ball bearing * Enclosure: WP1 - Open weather-protected machine Type * Large reservoir 1 to NEMA MG 1-1993 (WP-1). * High Torque * Inverter Rated (10:1 variable torque) * Vacuum Pressure Impregnation (VPI Treatment) for all windings * Cast Iron Construction * Non-reverse coupling (ball bearing type) included * Hi-Thrust Design * Suitable for Part Wind Start at 230V * Precision Balancing * Suitable for Part Wind Start at 460V * 40° C ambient temperature * Thermal Protected as standard * Class F insulation system, class B rise at full load * Space Heaters as standard * Class H impregnation resin * Lifting provisions on 213T frame and above

CATALOG FRAME NET MULT. FL "CD" "BD" Down WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. DIM. Thrust (LBS.) NOTES10 1800 215TP 230/460 NAE-VHS-10-4 VHS $922.88 M15 85.7 17.56" 10.0" 2500 275 115 1800 254TP 230/460 NAE-VHS-15-4 VHS $1,157.53 M15 86.5 23.38" 10.0" 3200 548 1

1800 254TP 230/460 NAE-VHS-15-4-1.188CP VHS $1,157.53 M15 86.5 23.38" 10.0" 3200 548 120 1800 256TP 230/460 NAE-VHS-20-4 VHS $1,318.67 M15 87.5 23.38" 10.0" 3200 568 1






1800 364TP 460 NAE-VHS-60-4-1.188CP VHS $2,632.84 M15 92.3 31.16" 16.5" 5600 1031 11800 364TP 460 NAE-VHS-60-4-PWS VHS $2,632.84 M15 92.3 31.16" 16.5" 5600 1031 2

75 1800 365TP 230/460 NAE-VHS-75-4 VHS $3,205.51 M15 92.3 31.16" 16.5" 5600 1075 11800 365TP 460 NAE-VHS-75-4-1.188CP VHS $3,205.51 M15 92.3 31.16" 16.5" 5600 1075 11800 365TP 460 NAE-VHS-75-4-PWS VHS $3,205.51 M15 92.3 31.16" 16.5" 5600 1075 2

100 1800 404TP 230/460 NAE-VHS-100-4 VHS $4,049.42 M15 92.3 36.94" 16.5" 6700 1399 11800 404TP 460 NAE-VHS-100-4-1.188CP VHS $4,049.42 M15 92.3 36.94" 16.5" 6700 1399 11800 404TP 460 NAE-VHS-100-4-PWS VHS $4,049.42 M15 92.3 36.94" 16.5" 6700 1399 21800 404TP 460 NAE-VHS-100-4-EHT VHS $4,221.15 M15 92.3 36.94" 16.5" 10720 1399 2,4

125 1800 405TP 460 NAE-VHS-125-4-PWS VHS $4,891.72 M15 93.2 36.94" 16.5" 6700 1465 21800 405TP 460 NAE-VHS-125-4-EHT VHS $5,099.73 M15 93.2 36.94" 16.5" 10720 1465 2,4




300 1800 5006P 460 NAE-VHS-300-4-EHT VHS $12,152.14 M20 94.8 49.75" 24.5" 24000 2250 2,3,4350 1800 5006P 460 NAE-VHS-350-4-EHT VHS $14,033.82 M20 95.0 49.75" 24.5" 24000 2500 2,3,4400 1800 5008P 460 NAE-VHS-400-4-EHT VHS $15,913.78 M20 95.3 53.88" 24.5" 24000 2600 2,3,4450 1800 5008P 460 NAE-VHS-450-4-EHT VHS $17,372.00 M20 95.4 53.88" 24.5" 24000 2700 2,3,4500 1800 5008P 460 NAE-VHS-500-4-EHT VHS $19,394.03 M20 95.5 53.88" 24.5" 24000 2800 2,3,4

Notes:

1.) Suitable for Part Wind Start on 230V. ISO 90012.) Suitable for Part Wind Start at 460V.3.) Rolled Steel Frame.4.) Extra High Thrust, Double Stacked Bearing Design.


COUPLING INCLUDEDIN PRICE!

VERTICAL HOLLOW SHAFT MOTORSHIGH EFFICIENCYHIGH THRUST DESIGNCAST IRON CONSTRUCTIONOPEN DRIPPROOF (WP-1) ENCLOSURE

NET PRICING M15 0.321APPLICATIONS: NET PRICING M20 0.344

Designed primarily for deep well turbine pump applications. The coupling is equipped with a non-reverse ratchet, which prevents motor rotationfrom backspin at shutdown. These motors are built to NEMA standards and have special bearing arrangements to carry heavy thrust loads.

FEATURES:

* Meets or exceeds NEMA performance standards * Class B Temperature Rise @ 1.15 Service Factor * Three Phase, 60 Hz * Oversized angular contact bearing and ball bearing * Enclosure: WP1 - Open weather-protected machine Type * Large reservoir 1 to NEMA MG 1-1993 (WP-1). * High Torque * Inverter Rated (10:1 variable torque) * Vacuum Pressure Impregnation (VPI Treatment) for all windings * Cast Iron Construction * Non-reverse coupling (ball bearing type) included * Hi-Thrust Design * Suitable for Part Wind Start at 230V * Precision Balancing * Suitable for Part Wind Start at 460V * 40° C ambient temperature * Thermal Protected as standard * Class F insulation system, class B rise at full load * Space Heaters as standard * Class H impregnation resin * Lifting provisions on 213T frame and above

CATALOG FRAME NET MULT. FL "CD" "BD" Down WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. DIM. Thrust (LBS.) NOTES10 1800 215TP 230/460 NAE-VHS-10-4-HE VHS $1,042.93 M15 90.2 17.56" 10.0" 2500 288 115 1800 254TP 230/460 NAE-VHS-15-4-HE VHS $1,308.08 M15 91.7 23.38" 10.0" 3200 561 120 1800 256TP 230/460 NAE-VHS-20-4-HE VHS $1,490.08 M15 92.4 23.38" 10.0" 3200 568 125 1800 284TP 230/460 NAE-VHS-25-4-HE VHS $1,662.14 M15 92.4 24.75" 10.0" 3200 573 130 1800 286TP 230/460 NAE-VHS-30-4-HE VHS $1,868.22 M15 92.4 24.75" 10.0" 3200 602 140 1800 324TP 230/460 NAE-VHS-40-4-HE VHS $2,171.24 M15 93.0 28.22" 16.5" 5500 798 150 1800 326TP 230/460 NAE-VHS-50-4-HE VHS $2,576.35 M15 93.0 28.22" 16.5" 5500 870 160 1800 364TP 230/460 NAE-VHS-60-4-HE VHS $2,975.03 M15 93.6 31.16" 16.5" 5600 1097 1

1800 364TP 460 NAE-VHS-60-4-HE-PWS VHS $2,975.03 M15 93.6 31.16" 16.5" 5600 1097 275 1800 365TP 230/460 NAE-VHS-75-4-HE VHS $3,622.16 M15 94.1 31.16" 16.5" 5600 1135 1

1800 365TP 460 NAE-VHS-75-4-HE-PWS VHS $3,622.16 M15 94.1 31.16" 16.5" 5600 1135 2100 1800 404TP 230/460 NAE-VHS-100-4-HE VHS $4,575.86 M15 94.5 36.94" 16.5" 6700 1461 1

1800 404TP 460 NAE-VHS-100-4-HE-PWS VHS $4,575.86 M15 94.5 36.94" 16.5" 6700 1461 21800 404TP 230/460 NAE-VHS-100-4-HE-EHT VHS $4,770.06 M15 94.5 36.94" 16.5" 10720 1461 2,4

125 1800 405TP 460 NAE-VHS-125-4-HE-PWS VHS $5,527.62 M15 95.0 36.94" 16.5" 6700 1553 21800 405TP 460 NAE-VHS-125-4-HE-EHT VHS $5,762.59 M15 95.0 36.94" 16.5" 10720 1553 2,4




300 1800 5006P 460 NAE-VHS-300-4-HE-EHT VHS $13,731.79 M20 95.8 49.75" 24.5" 24000 2871 2,3,4350 1800 5006P 460 NAE-VHS-350-4-HE-EHT VHS $15,858.06 M20 96.2 49.75" 24.5" 24000 2972 2,3,4400 1800 5008P 460 NAE-VHS-400-4-HE-EHT VHS $17,982.60 M20 96.2 53.88" 24.5" 24000 3042 2,3,4450 1800 5008P 460 NAE-VHS-450-4-HE-EHT VHS $19,630.36 M20 96.2 53.88" 24.5" 24000 3461 2,3,4500 1800 5008P 460 NAE-VHS-500-4-HE-EHT VHS $21,915.21 M20 96.2 53.88" 24.5" 24000 3573 2,3,4

**These motors meet or exceed the minimum standard as defined in many State and Local Efficiency Rebate Programs for Premium Efficiency Special Purpose Vertical Hollow Shaft Motors. Consult your local power company for eligibility**

ISO 9001Notes:1.) Suitable for Part Wind Start on 230V.2.) Suitable for Part Wind Start at 460V.3.) Rolled Steel Frame.4.) Extra High Thrust, Double Stacked Bearing Design.

HIGH EFFICIENCY



VERTICAL HOLLOW SHAFT MOTOR COUPLINGSModel Nominal SQ Key NET

HP Frame Number Standard Option BX (EW) Price

10 215TP VC210-.750 x 0.750 0.18810 215TP VC210-1.00 x 1.000 0.250 $44.5510 215TP VC210-.875 x 0.875 0.18810 215TP VC210-BLANK x 0.000 0.000

15-20 254TP-256TP VC250-1.00 x 1.000 0.25015-20 254TP-256TP VC250-.875 x 0.875 0.18815-20 254TP-256TP VC250-.750 x 0.750 0.18815-20 254TP-256TP VC250-1.188 x 1.188 0.250 $46.5815-20 254TP-256TP VC250-1.25A x 1.250 0.25015-20 254TP-256TP VC250-1.25B x 1.250 0.37515-20 254TP-256TP VC250-BLANK x 0.000 0.000

25-30 284TP-286TP VC280-1.00 x 1.000 0.25025-30 284TP-286TP VC280-1.188 x 1.188 0.25025-30 284TP-286TP VC280-1.25A x 1.250 0.25025-30 284TP-286TP VC280-1.25B x 1.250 0.375 $46.5825-30 284TP-286TP VC280-.750 x 0.750 0.18825-30 284TP-286TP VC280-.875 x 0.875 0.18825-30 284TP-286TP VC280-BLANK x 0.000 0.000

40-50 324TP-326TP VC320-1.00 x 1.000 0.25040-50 324TP-326TP VC320-1.188 x 1.188 0.25040-50 324TP-326TP VC320-1.25A x 1.250 0.25040-50 324TP-326TP VC320-1.25B x 1.250 0.375 $50.2240-50 324TP-326TP VC320-1.438 x 1.438 0.37540-50 324TP-326TP VC320-1.500 x 1.500 0.37540-50 324TP-326TP VC320-BLANK x 0.000 0.000

60-75 364TP-365TP VC360-1.00 x 1.000 0.25060-75 364TP-365TP VC360-1.188 x 1.188 0.25060-75 364TP-365TP VC360-1.25A x 1.250 0.25060-75 364TP-365TP VC360-1.25B x 1.250 0.375 $58.3260-75 364TP-365TP VC360-1.438 x 1.438 0.37560-75 364TP-365TP VC360-1.500 x 1.500 0.37560-75 364TP-365TP VC360-BLANK x 0.000 0.000

100-125 404TP-405TP VC400-1.188 x 1.188 0.250100-125 404TP-405TP VC400-1.25A x 1.250 0.250100-125 404TP-405TP VC400-1.25B x 1.250 0.375100-125 404TP-405TP VC400-1.438 x 1.438 0.375100-125 404TP-405TP VC400-1.50 x 1.500 0.375 $66.83100-125 404TP-405TP VC400-1.563 x 1.563 0.375100-125 404TP-405TP VC400-1.688 x 1.688 0.375100-125 404TP-405TP VC400-1.813 x 1.813 0.375100-125 404TP-405TP VC400-BLANK x 0.000 0.000

150-200 444TP-445TP VC440-1.438 x 1.438 0.375150-200 444TP-445TP VC440-1.500 x 1.500 0.375150-200 444TP-445TP VC440-1.688 x 1.688 0.375150-200 444TP-445TP VC440-1.750 x 1.750 0.375 $111.38150-200 444TP-445TP VC440-1.938 x 1.938 0.500150-200 444TP-445TP VC440-2.188 x 2.188 0.500150-200 444TP-445TP VC440-BLANK x 0.000 0.000

250 444TP-445TP VC440-1.438 x 1.438 0.375250 444TP-445TP VC440-1.500 x 1.500 0.375250 444TP-445TP VC440-1.688 x 1.688 0.375250 444TP-445TP VC440-1.750 x 1.750 0.375 $111.38250 444TP-445TP VC440-1.938 x 1.938 0.500250 444TP-445TP VC440-2.188 x 2.188 0.500250 444TP-445TP VC440-BLANK x 0.000 0.000

300-350 5006P VC500-1.501 X 1.501 0.375300-350 5006P VC500-1.688 X 1.688 0.375300-350 5006P VC500-1.751 X 1.751 0.500 $200.48300-350 5006P VC500-1.813 X 1.813 0.500

300-350 5006P VC500-BLANK X 0.000 0.000

400-450 5008P VC500-1.938 X 1.938 0.500400-450 5008P VC500-2.001 X 2.001 0.500400-450 5008P VC500-2.188 X 2.188 0.500 $200.48400-450 5008P VC500-2.251 X 2.251 0.500

400-450 5008P VC500-BLANK X 0.000 0.000

500 5008P VC500-1.938 X 1.938 0.500500 5008P VC500-2.001 X 2.001 0.500500 5008P VC500-2.188 X 2.188 0.500 $200.48500 5008P VC500-2.251 X 2.251 0.500500 5008P VC500-BLANK X 0.000 0.000



VERTICAL HOLLOW SHAFT MOTOR ACCESSORIES

Model NET Mult. Weight Model NET Mult. Weight

HP Frame Number Price Sym. (Lbs.) HP Frame Number Price Sym. (Lbs.)

10 215TP NRR‐215TP $175.37 M11 13.0 40 324TP SG‐320TP $14.18 M11 0.15


20 256TP NRR‐250TP $312.26 M11 32.0 60 364TP SG‐36OTP $14.18 M11 0.15





60 364TP NRR‐36OTP $359.64 M11 43.2 200 445TP SG‐445TP $26.33 M11 0.33


100 404TP NRR‐400TP $470.61 M11 70.1 300 5006P SG‐5006P $26.33 M11 0.33

125 405TP NRR‐400TP $470.61 M11 70.1 350 5006P SG‐5006P $26.33 M11 0.33

150 444TP NRR‐445TP $748.44 M11 99.7 400 5008P SG‐5008P $26.33 M11 0.33

200 445TP NRR‐445TP $748.44 M11 99.7 450 5008P SG‐5008P $26.33 M11 0.33

250 445TP NRR‐445TP $748.44 M11 99.7 500 5008P SG‐5008P $26.33 M11 0.33

300 5006P NRR‐5006P $1,422.36 M11 169.5

350 5006P NRR‐5006P $1,422.36 M11 169.5

400 5008P NRR‐5008P $1,422.36 M11 169.5

450 5008P NRR‐5008P $1,422.36 M11 169.5

500 5008P NRR‐5008P $1,422.36 M11 169.5

Model NET Mult. Weight Model Base NET Mult. Weight

HP Frame Number Price Sym. (Lbs.) HP Frame Number Size Price Sym. (Lbs.)

10 215TP TC‐215TP $35.64 M11 2.43 10 215TP AB‐215TP‐10 10" $192.78 M11 32.4

15 254TP TC‐250TP $48.60 M11 2.54 15 254TP AB‐250TP‐12 12" $230.85 M11 51.2

20 256TP TC‐250TP $48.60 M11 2.54 AB‐250TP‐16.5 16.5" $230.85 M11 51.2

25 284TP TC‐280TP $48.60 M11 2.54 20 256TP AB‐250TP‐12 12" $230.85 M11 51.2

30 286TP TC‐280TP $48.60 M11 2.54 AB‐250TP‐16.5 16.5" $230.85 M11 51.2

40 324TP TC‐320TP $64.80 M11 2.87 25 284TP AB‐280TP‐12 12" $230.85 M11 51.2

50 326TP TC‐320TP $64.80 M11 2.87 AB‐280TP‐16.5 16.5" $230.85 M11 51.2

60 364TP TC‐360TP $68.04 M11 3.97 30 286TP AB‐280TP‐12 12" $230.85 M11 51.2

75 365TP TC‐360TP $68.04 M11 3.97 AB‐280TP‐16.5 16.5" $230.85 M11 51.2

100 404TP TC‐400TP $78.98 M11 5.18 40 324TP AB‐320TP‐12 12" $331.29 M11 79.2

125 405TP TC‐400TP $78.98 M11 5.18 AB‐320TP‐16.5 16.5" $331.29 M11 79.2

150 444TP TC‐445TP $91.13 M11 7.28 50 326TP AB‐320TP‐12 12" $331.29 M11 79.2

200 445TP TC‐445TP $91.13 M11 7.28 AB‐320TP‐16.5 16.5" $331.29 M11 79.2

250 445TP TC‐445TP $91.13 M11 7.28 60 364TP AB‐360TP‐12 12" $406.22 M11 105.8

300 5006P TC‐5006P $147.83 M11 10.56 AB‐360TP‐16.5 16.5" $406.22 M11 105.8

350 5006P TC‐5006P $147.83 M11 10.56 75 365TP AB‐360TP‐12 12" $406.22 M11 105.8

400 5008P TC‐5008P $147.83 M11 10.56 AB‐360TP‐16.5 16.5" $406.22 M11 105.8

450 5008P TC‐5008P $147.83 M11 10.56 100 404TP AB‐400TP‐16.5 16.5" $470.61 M11 110.3

500 5008P TC‐5008P $147.83 M11 10.56 AB‐400TP‐20 20" $470.61 M11 110.3

125 405TP AB‐400TP‐16.5 16.5" $470.61 M11 110.3

AB‐400TP‐20 20" $470.61 M11 110.3

150 444TP AB‐445TP‐16.5 16.5" $620.46 M11 177.7

AB‐445TP‐20 20" $620.46 M11 177.7

200 445TP AB‐445TP‐16.5 16.5" $620.46 M11 177.7

AB‐445TP‐20 20" $620.46 M11 177.7

250 445TP AB‐445TP‐16.5 16.5" $620.46 M11 177.7

AB‐445TP‐20 20" $620.46 M11 177.7

Ball Bearing Non‐Reverse Ratchet Assembly Sight Glass

TOP COVER Alternative Bases


ROTARY PHASE CONVERTER MOTORSTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONHIGH EFFICIENCY DESIGN


Specifically designed without shafts for use with rotary phase converters to run three phase equipment from single phase power.This is a rotary phase converter motor. This is NOT a complete phase converter system.

FEATURES:

* Meets or exceeds EPACT '92 and NRCan efficiency requirements * Stainless steel nameplate and zinc plated hardware * Suitable for wye-delta start on 213T frame and above * F1/F2 reversible * Dual voltage ratings suitable for part wind start on lower voltage * Feet are dual drilled on most frames * 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz * NEMA Design B performance * Vacuum Pressure Impregnation for all windings * Cast iron frame construction including the conduit box * Spike Resistant Inverter Duty Wire * Lifting provisions on 143T frame and above * Sealed bearings thru 215T frame * Condensation drains with plastic plugs * Regreasable open bearings 254T frame and above * IP55 Protection - Terminal box is sealed for IP66 * Class F insulation system, class B rise at full load * CSA + C + US Certification * 40° C ambient continuous duty * ISO 9001 Certification * Corrosion resistant paint

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES3 1800 182T 208-230/460 PC182T-3-4 NEWT $168.15 M19 85.5 12.6 905 1800 184T 208-230/460 PC184T-5-4 NEWT $181.36 M19 85.5 13.3 106

7.5 1800 213T 208-230/460 PC213T-7.5-4 NEWT $249.90 M19 87.5 15.7 15710 1800 215T 208-230/460 PC215T-10-4 NEWT $288.46 M19 87.5 19.2 18315 1800 254T 208-230/460 PC254T-15-4 NEWT $428.04 M19 89.5 19.4 28920 1800 256T 208-230/460 PC256T-20-4 NEWT $486.23 M19 89.5 21.1 34125 1800 284T 208-230/460 PC284T-25-4 NEWT $675.80 M19 91.0 23.4 43230 1800 286T 208-230/460 PC286T-30-4 NEWT $735.78 M19 91.0 24.9 47440 1800 324T 208-230/460 PC324T-40-4 NEWT $959.62 M19 91.7 25.6 59050 1800 326T 208-230/460 PC326T-50-4 NEWT $1,227.01 M19 91.7 26.6 68360 1800 364T 208-230/460 PC364T-60-4 NEWT $1,620.78 M19 92.4 27.4 841


UNWOUND MOTORSTHREE PHASE, TOTALLY ENCLOSED FAN COOLEDHEAVY DUTY CAST IRON CONSTRUCTIONCAN BE WOUND TO SPECIFICATION


Motors come with no windings so they can be wound to specification.

FEATURES:

* Stainless steel nameplate and zinc plated hardware * Cast iron frame construction including the conduit box* F1/F2 reversible * Condensation drains with plastic plugs* Feet are dual drilled on most frames * IP55 Protection - Terminal box is sealed for IP66

CATALOG FRAME NET MULT. FULL "C" WT.HP RPM FRAME VOLTS NUMBER TYPE PRICE SYM. EFF % DIM. (LBS.) NOTES150 1800 445T NO WINDING PE445T-150-4C-NW NEWT $2,963.79 M12 N/A 44.8 N/A200 1800 447T NO WINDING P447T-200-4C-NW NEWT $3,984.39 M12 N/A 48.3 N/A300 1800 449T NO WINDING PE449T-300-4C-NW NEWT $6,841.26 M12 N/A 53.3 N/A


FDPP SERIES - FUSIBLE DISCONNECT / NEMA 3R

Benshaw, Inc.

Prepackaged Pump Control Starters

ELECTRONIC OVERLOAD PROTECTIONNEMA RATED

240VDISC

MODEL NUMBER (AMP) NEMA HP OL DIMENSIONS (INCHES) WGT LISTECIRP)SBL(DWHEZISEMARF

FDBB323R* 30 0 3 4.4-22A 16 12 8 48 $1085FDPP523R* 30 1 5 4.4-22A 20 16 8 63 $1115FDPP723R* 30 2 7.5 8-40A 20 16 8 63 $1175FDPP1023R* 30 2 10 8-40A 20 16 8 63 $1225FDPP1523R* 60 2 15 8-40A 20 16 8 63 $1285FDPP3023R* 100 3 30 8-40A 20 16 8 125 $1425FDPP5023R** 200 4 50 16-80A 36 16 8 125 $1775

$1085$1115$1175$1225$1285$1425$1775$2385$6875$7865

480VDISC

MODEL NUMBER (AMP) NEMA HP OL DIMENSIONS (INCHES) WGT LISTECIRP)SBL(DWHEZISEMARF

FDPP543R* 30 0 5 4.4-22A 16 12 8 48FDPP1043R* 30 1 10 4.4-22A 20 16 8 63FDPP1543R* 30 2 15 8-40A 20 16 8 63FDPP2043R* 60 2 20 8-40A 20 16 8 63FDPP2543R* 60 2 25 16-80A 20 16 8 63FDPP5043R** 100 3 50 16-80A 20 16 8 125FDBB10043R** 200 4 100 1-5 W/CTA 36 16 8 TBDFDBB20043R** 400 5 200 1-5 W/CTA 48 24 12 TBDFDBB40043R** 600 6 400 1-5 W/CTA 70 30 18 TBDFDPP60043R** 800 7 600 1-5 W/CTA 70 30 18 TBD

* Fuses not supplied (Fuse Clip Class J)** Fuse Clip for Class J or L


Benshaw, Inc.

Prepackaged Pump Control StartersCBPP SERIES - COMBINATION CIRCUIT BREAKER / NEMA 3RELECTRONIC OVERLOAD PROTECTIONNEMA RATED

240VCB

MODEL NUMBER TRIP NEMA HP OL DIMENSIONS (INCHES) WGT LISTECIRP)SBL(DWHEZISSPMA

CPBB323R* 30 0 3 4.4-22 16 12 8 48 $1170CBPP523R* 40 1 5 4.4-22 20 16 8 63 $1213CBPP723R* 50 2 7.5 8-40 20 16 8 63 $1281CBPP1023R* 60 2 10 8-40 20 16 8 63 $1287CBPP1523R* 70 2 15 8-40 20 16 8 63 $1329CBPP3023R* 125 3 30 16-80 20 16 8 125 $1540CBPP5023R* 250 4 50 1-5 36 16 8 125 $2254

480VCB

MODEL NUMBER TRIP NEMA HP OL DIMENSIONS (INCHES) WGT LISTECIRP)SBL(DWHEZISSPMA

CBPP543R 30 0 5 4.4-22 16 12 8 48 $1176CBPP1043R 40 1 10 4.4-22 20 16 8 63 $1213CBPP1543R 50 2 15 8-40 20 16 8 63 $1281CBPP2043R 60 2 20 8-40 20 16 8 63 $1281CBPP2543R 70 2 25 16-80 20 16 8 63 $1324CBPP5043R 125 3 50 16-80 20 16 8 125 $1540CPBB10043R 250 4 100 1-5 W/CT 36 16 8 125 $3038CPBB20043R 400 5 200 1-5 W/CT 48 24 12 TBD $8805CPBB40043R* 800 6 400 1-5 W/CT 70 30 18 TBD $9876CPBB50043R* 1000 7 500 1-5 W/CT 70 30 18 TBD $10,136CBPP60043R* 1000 7 600 1-5 W/CT 70 30 18 TBD $10,847

*Built to order: Please allow two weeks for shipment.


SOFT STARTS - NEMA 4/12 ENCLOSURESOLID STATE STARTERS W/ ATL BYPASSSEVERE CRUSHER DUTY / PACKAGED WITH CIRCUIT BREAKEREMERGENCY ACROSS-THE-LINE BYPASS

HP Benshaw LIST AMPS HP CB DIMENSIONS WT.460 V Model Number ENCLOSURE PRICE 480V TRIP H W D (LBS)

50 RX2E-050-480-12KP NEMA 4/12 5,200.00$ 65 50 100 48 24 13 24075 RX2E-075-480-12KP NEMA 4/12 6,385.00

$96 75 225 48 24 13 245

100 RX2E-100-480-12KP NEMA 4/12 7,100.00$

124 100 225 48 24 17 255125 RX2E-125-480-12KP NEMA 4/12 7,155.00

$156 125 225 48 36 17 355

150 RX2E-150-480-12KP NEMA 4/12 7,285.00$

180 150 300 48 36 17 360200 RX2E-200-480-12KP NEMA 4/12 9,565.00

$240 200 400 48 36 17 370

250 RX2E-250-480-12KP NEMA 4/12 10,525.00$

302 250 400 70 30 18 565300 RX2E-300-480-12KP NEMA 4/12 10,870.00

$361 300 600 70 30 18 570

400 RX2E-400-480-12KP NEMA 4/12 14,107.00$

477 400 800 87 37 20 850500 RX2E-500-480-12KP NEMA 4/12 19,300.00

$590 500 1200 87 37 20 875

600 RX2E-600-480-12KP NEMA 4/12 20,225.00

$

720 600 1200 87 37 20 905

Benshaw, Inc.

SOFT STARTS - NEMA 3R ENCLOSURESOLID STATE STARTERS W/ ATL BYPASSSEVERE CRUSHER DUTY / PACKAGED WITH CIRCUIT BREAKEREMERGENCY ACROSS-THE-LINE BYPASS

HP Benshaw LIST AMPS HP CB DIMENSIONS WT.460 V Model Number ENCLOSURE PRICE 480V TRIP H W D (LBS)

50 RX2E-050-480-3RKP NEMA 3R 5,700.00$ 65 50 100 48 24 13 24075 RX2E-075-480-3RKP NEMA 3R 6,700.00$ 96 75 225 48 24 13 245

100 RX2E-100-480-3RKP NEMA 3R 7,800.00$ 124 100 225 48 24 17 255125 RX2E-125-480-3RKP NEMA 3R 8,450.00$ 156 125 225 48 36 17 355150 RX2E-150-480-3RKP NEMA 3R 8,585.00$ 180 150 300 48 36 17 360200 RX2E-200-480-3RKP NEMA 3R 10,865.00$ 240 200 400 48 36 17 370250 RX2E-250-480-3RKP NEMA 3R 11,815.00$ 302 250 400 70 30 18 565300 RX2E-300-480-3RKP NEMA 3R 12,165.00$ 361 300 600 70 30 18 570400 RX2E-400-480-3RKP NEMA 3R 16,815.00$ 477 400 800 87 37 20 850500 RX2E-500-480-3RKP NEMA 3R 20,375.00$ 590 500 1200 87 37 20 875600 RX2E-600-480-3RKP NEMA 3R 22,400.00$ 720 600 1200 87 37 20 905


C-FLANGE KITS - NEWT AND NEPE TYPE

Application: NET PRICING M11 0.405

Kit designed for simple field conversion of standard motor to accommodate C-Flange mount.

DESIGNED TO FIT THE FOLLOWING FRAME TYPES: NEWT OR NEPE

CATALOG NET MULT. WT.FRAME NUMBER PRICE SYM (LBS.)143/5 3140-NEWT $13.77 M11 10182/4 3180-NEWT $26.33 M11 12213/5 3210-NEWT $27.95 M11 15213/5 3210-NEPE $27.95 M11 15254/6 3250-NEWT $56.30 M11 30254/6 3250-NEPE $56.30 M11 30284/6 3280-NEWT $70.47 M11 45324/6 3320-NEWT $84.65 M11 50364/5 3360-NEWT $155.52 M11 60364/5 3360-NEPE $155.52 M11 60404/5 3400-NEWT $170.91 M11 75404/5 3400-NEPE $170.91 M11 75

404/5-2P 3400-NEWT-2P $170.91 M11 75404/5-2P 3400-NEPE-2P $170.91 M11 75444/5/7/9 3440-NEWT $211.82 M11 90444/5/7/9 3440-NEPE $211.82 M11 90

444/5/7/9-2P 3440-NEWT-2P $211.82 M11 90444/5/7/9-2P 3440-NEPE-2P $211.82 M11 90

NOTE: Please confirm the frame type of the motor in order to choose the correct flange.

Please contact our customer service department if you have any questions.

D-FLANGE KITS - NEWT AND NEPE TYPE

Application:

Kit designed for simple field conversion of standard motor to accommodate D-Flange mount.

DESIGNED TO FIT THE FOLLOWING FRAME TYPES: NEWT OR NEPE

CATALOG NET MULT. WT.FRAME NUMBER PRICE SYM (LBS.)143/5 4140-NEWT $13.77 M11 10182/4 4180-NEWT $26.33 M11 12213/5 4210-NEWT $27.95 M11 15213/5 4210-NEPE $27.95 M11 15254/6 4250-NEWT $56.30 M11 30254/6 4250-NEPE $56.30 M11 30284/6 4280-NEWT $70.47 M11 45324/6 4320-NEWT $84.65 M11 50364/5 4360-NEWT $155.52 M11 60364/5 4360-NEPE $155.52 M11 60404/5 4400-NEWT $170.91 M11 75404/5 4400-NEPE $170.91 M11 75

404/5-2P 4400-NEWT-2P $170.91 M11 75404/5-2P 4400-NEPE-2P $170.91 M11 75444/5/7/9 4440-NEWT $211.82 M11 90444/5/7/9 4440-NEPE $211.82 M11 90

444/5/7/9-2P 4440-NEWT-2P $211.82 M11 90444/5/7/9-2P 4440-NEPE-2P $211.82 M11 90

NOTE: Please confirm the frame type of the motor in order to choose the correct flange.

Please contact our customer service department if you have any questions.


C-FLANGE KITS - RSTE TYPE



DESIGNED TO FIT THE FOLLOWING FRAME TYPES: RSTE

CATALOG NET MULT. WT.FRAME NUMBER PRICE SYM (LBS.)

140T 3140-RSTE $13.77 M11 10180T 3180-RSTE $26.33 M11 12210T 3210-RSTE $27.95 M11 15

C-FLANGE KITS - RSFD TYPE

Application:


DESIGNED TO FIT THE FOLLOWING FRAME TYPES: RSFD (Farm Duty)


140T 3140FD $13.77 M11 10180T 3180FD $26.33 M11 12210T 3210FD $27.95 M11 15

C-FLANGE KITS - SODP TYPE

Application:


DESIGNED TO FIT THE FOLLOWING FRAME TYPES: SODP


140T 3140-SODP $13.77 M11 10180T 3180-SODP $26.33 M11 12210T 3210-SODP $27.95 M11 15


EXPLOSION PROOF C-FACE KITS - NEXP TYPE


Kit designed for simple conversion of standard explosion proof motor to accommodate c-flange mount.This coversion must be done by a UL Certified shop.

FRAME STYLES: NEXP

CATALOG NET MULT. WT.FRAME NUMBER PRICE SYM. (LBS.)

140T 3140XP $33.21 M11 10180T 3180XP $40.50 M11 12210T 3210XP $53.46 M11 15250T 3250XP $64.40 M11 30280T 3280XP $75.33 M11 45320T 3320XP $108.14 M11 50360T 3360XP $155.12 M11 60400T 3400XP $170.91 M11 75

400TS 3400SXP $170.91 M11 75444/5T 3445XP $211.82 M11 90


SEVERE DUTY CONVERSION KITS - NEWT


Cast iron fan cover for severe environments where a motor with all cast iron construction is required.

FRAME STYLES: NEWT


140T 1140-NEWT* $23.49 M11 TBD180T 1180-NEWT* $26.33 M11 TBD210T 1210-NEWT $42.12 M11 TBD250T 1250-NEWT $65.61 M11 TBD280T 1280-NEWT* $84.65 M11 TBD320T 1320-NEWT* $92.34 M11 TBD360T 1360-NEWT $130.01 M11 TBD400T 1400-NEWT $260.42 M11 TBD440T 1440-NEWT** $279.05 M11 TBD

* Fits NEPE Frame Type as well.**Fits 400 NEPE Frame Type as well.

SEVERE DUTY CONVERSION KITS - NEHE, NEXP AND NEH

Application:

Cast iron fan cover for severe environments where a motor with all cast iron construction is required.

FRAME STYLES: NEHE, NEXP AND NEH


140T 1140 $23.49 M11 TBD180T 1180 $26.33 M11 TBD210T 1210 $42.12 M11 TBD250T 1250 $65.61 M11 TBD280T 1280 $84.65 M11 TBD320T 1320 $92.34 M11 TBD360T 1360 $130.01 M11 TBD400T 1400 $260.42 M11 TBD440T 1440 $279.05 M11 TBD



MOTOR SLIDE BASES

FEATURES:

* Bases are provided with washers * Primed with Oven-Baked Primer for easy painting * All "D" bolts (or Motor mounting bolts) are welded into position to prevent spinning and dropping from the slots * All "D" bolts are fixed to the exact foot pattern of the motor to aid in easier motor installation * 56 to 145 frames are single-adjusting screw style * 182 to 505 frames are double-adjusting screw style

CATALOG WEIGHT MULTIPLIER NETNUMBER (Lbs.) SYMBOL PRICE

NA56 3 M11 $7.29NA143 6 M11 $14.18NA145 7 M11 $14.18NA182 10 M11 $19.44NA184 10 M11 $19.44NA213 15 M11 $28.76NA215 17 M11 $28.76NA254 19 M11 $39.29NA256 20 M11 $39.29NA284 24 M11 $44.15NA286 25 M11 $44.15NA324 35 M11 $64.40NA326 36 M11 $64.40NA364 49 M11 $89.51NA365 50 M11 $89.51NA404 66 M11 $109.76NA405 68 M11 $109.76NA444 74 M11 $124.34NA445 76 M11 $124.34NA447 102 M11 $164.43NA449 105 M11 $164.43NA505 137 M11 $255.15


NET PRICING M21

0.27

OUR CATALOG DESCRIPTION NET WT.

NUMBER BOX SIZE RATIO OUTPUT BORE (MAX) PRICE (LBS.)

NBS-115-2-15 2 15:1 1-15/16" $245.97 58

NBS-115-2-25 2 25:1 1-15/16" $245.97 58

NBS-203-3-15 3 15:1 2-3/16" $436.86 98NBS-203-3-25 3 25:1 2-3/16" $436.86 98

NBS-207-4-15 4 15:1 2-7/16" $590.76 139

NBS-207-4-25 4 25:1 2-7/16" $590.76 139

NBS-215-5-15 5 15:1 2-15/16" $887.49 207

NBS-215-5-25 5 25:1 2-15/16" $887.49 207

NBS-307-6-15 6 15:1 3-7/16" $1,159.65 285

NBS-307-6-25 6 25:1 3-7/16" $1,159.65 285

NBS-315-7-15 7 15:1 3-15/16" $2,295.00 462

NBS-315-7-25 7 25:1 3-15/16" $2,295.00 462

NBS-407-8-15 8 15:1 4-7/16" $3,146.58 633

NBS-407-8-25 8 25:1 4-7/16" $3,146.58 633

NBS-415-9-15 9 15:1 4-15/16" $4,127.22 760NBS-415-9-25 9 25:1 4-15/16 $4,127.22 760

*Dodge is a trademark of Baldor Electric Company, which does not sponsor or authorize, or is otherwise affiliated with this product.

SHAFT MOUNT GEAR REDUCERS

Direct "Drop In" for Dodge® ‐ TXT style



NBS SHAFT MOUNT PARTS AND ACCESSORIES

BACKSTOPS

NETCATALOG NUMBER DESCRIPTION PRICE

NBS-BSA-2 Backstop Assembly Kit - Size 2 Box $57.78








MOTOR MOUNTS


NBS-MM-2 Motor Mount - Size 2 Box - 56 - 215T Frames $104.49NBS-MM-3 Motor Mount - Size 3 Box - 56 - 215T Frames $107.46

NBS-MM-4 Motor Mount - Size 4 Box - 143T - 286T Frames $167.67





TORQUE ARMS


NBS-TA-2 Torque Arm Size 2 Box - 56 - 215T Frames $16.74

NBS-TA-3 Torque Arm Size 3 Box - 56 - 215T Frames $16.74

NBS-TA-4 Torque Arm Size 4 Box - 143T - 286T Frames $30.24








NBS SHAFT MOUNT PARTS AND ACCESSORIES

BELT GUARDS


NBS-BG-2 Belt Guard - Size 2 Box $104.49NBS-BG-3 Belt Guard - Size 3 Box $118.80NBS-BG-4 Belt Guard - Size 4 Box $136.35NBS-BG-5 Belt Guard - Size 5 Box $150.39NBS-BG-6 Belt Guard - Size 6 Box $171.18NBS-BG-7 Belt Guard - Size 7 Box $201.42NBS-BG-8 Belt Guard - Size 8 Box $237.06

BUSHING KITS


NBS-BK-2-1.1516 Bushing Kit - Bushing Size - 1-15/16" $36.18NBS-BK-2-1.1116 Bushing Kit - Bushing Size - 1-11/16" $36.18NBS-BK-2-1.0716 Bushing Kit - Bushing Size - 1-7/16" $36.18

NBS-BK-3-2.0316 Bushing Kit - Bushing Size - 2-3/16" $44.28NBS-BK-3-2.0000 Bushing Kit - Bushing Size - 2" $44.28NBS-BK-3-1.1516 Bushing Kit - Bushing Size - 1-15/16" $44.28

NBS-BK-4-2.0716 Bushing Kit - Bushing Size - 2-7/16" $61.29NBS-BK-4-2.0316 Bushing Kit - Bushing Size - 2-3/16" $61.29







NET PRICINGM230.27

NBS SHAFT MOUNT REPAIR KITS

NET

MODEL NUMBER DESCRIPTION PRICE

NBS-RK1-2 KIT INCLUDES ALL SEALS, GASKETS, AND BEARINGS. 30.24$

NBS-RK2-215KIT INCLUDES ALL SEALS, GASKETS, AND BEARINGS. INPUT SHAFT / PINION AND 1st STAGE REDUCTION GEAR. 15:1 RATIO


NBS-RK3-215KIT INCLUDES ALL SEALS, GASKETS, AND BEARINGS. INPUT SHAFT / PINION AND 1st STAGE REDUCTION GEAR. 2nd STAGE REDUCTION GEAR AND HUB. 15:1 RATIO


NET







NET







NET







NET







NET







NET







NET







5

217.35$

310.50$

BOX SIZE

2

60.48$

86.40$

BOX SIZE

3

107.73$

153.90$

BOX SIZE

4

145.53$

207.90$

BOX SIZE

9

1,011.15$

1,444.50$

BOX SIZE

6

284.58$

406.08$

BOX SIZE

7

562.95$

803.25$

BOX SIZE

8

771.12$

1,101.60$

BOX SIZE


Documents

Electric Motors and · PDF fileNET PRICE CATALOG Electric Motors and Accessories 800-884-0404 [email protected]