Electric Electronic Circuits

Embed Size (px)

Citation preview

  • 8/6/2019 Electric Electronic Circuits

    1/53

    1

    Electric-Electronic Circuits The next 43 slides cover various electric and electronic circuits which have been employed in devices

    throughout the U.S. or abroad. These circuits are not an all-inclusive listing, nor is it intended to be.

    Hopefully you will have the time and supplies to build the circuits and experiment with them. If you

    have the funds available, Radio Shack has several mini-engineer notebooks which cover different

    experiments and circuits which can be adapted to our uses.

    If you utilize the small white Radio Shack buzzers, a 100; (Ohm) resistor placed in parallel with the

    buzzer may be necessary. Some of these buzzers are equivalent to a 55meg ; resistor and do not

    allow enough current through t hold open a transistors Gate. The 100 ; resistor allows a sufficient

    amount of current to flow through to keep the Gate open.

    If you have any problems or questions, feel free to contact me: Drew A. Prater, W: (256)842-

    2324/2325 or [email protected].

  • 8/6/2019 Electric Electronic Circuits

    2/53

    2

    Foil Switch

    9v

    Tin Foil

    I

    n

    s

    u

    l

    a

    t

    o

    r

    Tin Foil

  • 8/6/2019 Electric Electronic Circuits

    3/53

    3

    9V 9V

    +- +

    Buzzer

    -

    SCR

    Switch

    Photocell

    -

    Sensitive Photo Cell

  • 8/6/2019 Electric Electronic Circuits

    4/53

    4

    Sensitive Photo Cell Circuit

    9v

    9v

  • 8/6/2019 Electric Electronic Circuits

    5/53

    5

    PHOTO-CELL

    TRANSISTOR

    Photo-cell Circuit

    9V

  • 8/6/2019 Electric Electronic Circuits

    6/53

    6

    Photo Cell Device

    Anode

    Cathode Gate

    9V

    SCRPhoto Cell

  • 8/6/2019 Electric Electronic Circuits

    7/53

    7

    SCR

    9V

    +

    Buzzer

    -

    -

    Photocell

    Photo Cell

  • 8/6/2019 Electric Electronic Circuits

    8/53

    8

    PIR Device

    SCR

    9V

    +Switch

    + Buzzer

    -

  • 8/6/2019 Electric Electronic Circuits

    9/53

    9

    PIR Device

    9V

    TNT

    Transistor Red lead

    Switch

  • 8/6/2019 Electric Electronic Circuits

    10/53

    10

    Passive Infrared

  • 8/6/2019 Electric Electronic Circuits

    11/53

    11

    Radio Device

    8

    Anode

    Cathode Gate

    9V

    SCR

  • 8/6/2019 Electric Electronic Circuits

    12/53

    12

    Pressure Release Circuit

    3v

    NC NO C

    Magnetic Reed

    Switch

    Microswitch

  • 8/6/2019 Electric Electronic Circuits

    13/53

    13

    9V

    +

    -

    MICRO-SWITCH

    NC NO C

    Series Circuit - Pressure Release

    Microswitch

  • 8/6/2019 Electric Electronic Circuits

    14/53

    14

    Pressure Microswitch

    9V

    +

    -

    MICRO-SWITCH

    NC NO C

  • 8/6/2019 Electric Electronic Circuits

    15/53

    15

    Collapsing Circuit

    9V

    9V

    B

    A

  • 8/6/2019 Electric Electronic Circuits

    16/53

    16

    Collapsing Circuit

    9V

    9V

    C

    A

    B

    3V

  • 8/6/2019 Electric Electronic Circuits

    17/53

    17

    6v

    NC NO C

    Magnetic Reed Switch

    LEDMicroswitch

    Pressure Pads

    Safe/Arm Switch

  • 8/6/2019 Electric Electronic Circuits

    18/53

    18

    E-Cell Circuit

    Toggle

    SwitchE-CellResistor

  • 8/6/2019 Electric Electronic Circuits

    19/53

    9v

    SC1

    Penalty DeviceBP1-1

    S1

    S2

    L1

    L2

    BP1-2

    BP2-1

    BP2-2

    BZ1

    D1

    Bombs by DAP.

  • 8/6/2019 Electric Electronic Circuits

    20/53

    20

    Tilt Device

    Anode

    Cathode Gate

    9V

    SCR

    Mercury Switch

    Vapor Switch

  • 8/6/2019 Electric Electronic Circuits

    21/53

    21

    Vibratory Circuit

    Anode

    Cathode Gate

    9V

    SCR

    Vibratory Switch

  • 8/6/2019 Electric Electronic Circuits

    22/53

    22

    Capacitor Firing System

    Capacitor

    9V

  • 8/6/2019 Electric Electronic Circuits

    23/53

    23

    Capacitor Firing System

    Capacitor

  • 8/6/2019 Electric Electronic Circuits

    24/53

    24

    Resistor/Capacitor Circuit

    Toggle

    SwitchCapacitorResistor

    TRANSISTOR

    9V

  • 8/6/2019 Electric Electronic Circuits

    25/53

    25

    SCR

    LOAD

    Anode

    Cathode Gate

    9V

  • 8/6/2019 Electric Electronic Circuits

    26/53

    26

    Silicon Controlled Rectifier (SCR)

  • 8/6/2019 Electric Electronic Circuits

    27/53

    27

    LOAD

    Transistor

    NOTE: Touch base leg to + and - side of battery. If + side makes light glow, transistor is an

    NPN type. If - side makes light glow, transistor is a PNP type.

    9V

    Base

    Collector

    Emitter

    Transistor Check

  • 8/6/2019 Electric Electronic Circuits

    28/53

    28

    Transistor in Package

    Metal tab makes

    contact to collector of

    chip and helpsconduct heat away.

    Solid plastic

    molded around

    silicon chip

    BaseCollector

    Emitter

    Terminals

    make contact

    to chip

    Silicon chip

    has three parts

  • 8/6/2019 Electric Electronic Circuits

    29/53

    29

    Fusible Element (GPO)

  • 8/6/2019 Electric Electronic Circuits

    30/53

    30

    FIRING SWITCHES

    DETONATOR

    ARMING

    CONTACTS

    FUSIBLE ELEMENT

    SWITCH

    POWER SOURCE

  • 8/6/2019 Electric Electronic Circuits

    31/53

    31

  • 8/6/2019 Electric Electronic Circuits

    32/53

    32

    Canadian Device

  • 8/6/2019 Electric Electronic Circuits

    33/53

    33

  • 8/6/2019 Electric Electronic Circuits

    34/53

    34

  • 8/6/2019 Electric Electronic Circuits

    35/53

    35

  • 8/6/2019 Electric Electronic Circuits

    36/53

    36

    SHORTED PLUG

    COMPLETES CIRCUIT

    PLUG & JACK

    POWER

    SOURCE

    NOTE 3

    JACK

    NOTE 1 POWERSOURCE

    CIRCUIT 1

    NOTE 2

    POWER

    SOURCE

    LOAD

    CIRCUIT 2

    CIRCUIT 3

    LOAD

    COIL

    NOTE: 1. Power source A: Decays eliminating power to coil of relay, thereby allowing

    movable arm to go back to original position completing Circuit C.

    2. Cutting wire leading to coil allows moveable arm to go back to original position

    and completes Circuit C.

    3. Spring attached to movable arm can overcome magnetic force exerted by coil

    if power source A is weak and relay is jarred hard enough.

  • 8/6/2019 Electric Electronic Circuits

    37/53

    37

    Midlander Device

  • 8/6/2019 Electric Electronic Circuits

    38/53

    38

  • 8/6/2019 Electric Electronic Circuits

    39/53

    39

    Booby Trapped Flight Bag

  • 8/6/2019 Electric Electronic Circuits

    40/53

    40

  • 8/6/2019 Electric Electronic Circuits

    41/53

    41

  • 8/6/2019 Electric Electronic Circuits

    42/53

    42

  • 8/6/2019 Electric Electronic Circuits

    43/53

    43

  • 8/6/2019 Electric Electronic Circuits

    44/53

    44

  • 8/6/2019 Electric Electronic Circuits

    45/53

    45

  • 8/6/2019 Electric Electronic Circuits

    46/53

    46

  • 8/6/2019 Electric Electronic Circuits

    47/53

    47

  • 8/6/2019 Electric Electronic Circuits

    48/53

    48

    99 Hour Timer

  • 8/6/2019 Electric Electronic Circuits

    49/53

    49

    9V

    Transistor

    Black lead

    Red

    Lead

    TNT

    Switch

  • 8/6/2019 Electric Electronic Circuits

    50/53

    50

    555 Timer Circuit

  • 8/6/2019 Electric Electronic Circuits

    51/53

    51

    555 Timer Circuits

  • 8/6/2019 Electric Electronic Circuits

    52/53

    52

  • 8/6/2019 Electric Electronic Circuits

    53/53

    53