Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
e l e c t r o n i c
Quality is our Drive.
Product GroupBraking Devices
UL USC
LISTED
Product GroupBraking Devices
PETER electronic sets your machines intelligently in motion, controls them reliably, and brings them to a standstill
in a controlled way. Our comprehensive range of products includes braking devices, frequency inverters, thyristor
controllers and soft starters. PETER electronic's braking devices enable low-wear and reliable braking of your machines
and plants. Electronic DC brakes from PETER electronic are used wherever the deceleration time of the tool (saw disk,
cutting blade, milling cutter, etc.) needs to be shortened for time and/or safety reasons. Our braking systems offer
you convincing advantages:
Reduction of your routine maintenance costs
Extended lifetime of your equipment
Freedom from interference accordingto EMC-directive
No additional line reactors required
Competent technical support
Development of individual solutions
Quality and service – “made in Germany“
Quality is our Drive.PETER electronic
The systems VersiBrake meet the requirements of theIFA (Technical Committee for Wood) according to theTest Principles Wood working machines GS-HO-01. The VersiBrake L (LP) devices are certified with theDGUV test mark. Upon request this is also possiblefor further versions.
A COMPREHENSIVE OFFERWe offer solutions for all kindsof application and industries.
We will be pleased to developindividual devices andtypes for you.
Type designation
Rated device current
Features (options included)
Brake start via motor contactor
Brake start via motor voltage
Integrated braking contactor
DGUV test mark
Standstill-dependent braking
Time-dependent braking
Signaling relay for exceeded braking times
Current control 0 up to 100%
Automatic remanence time optimization
Thermal overload monitoring
Monitoring of braking frequency
2nd braking time selectable
Manual braking stop selectable
Fault signaling relay
Braking current display
Wide-voltage-range-capable
Plug-in control terminals
Motor PTC monitoring
Star-delta starting control
Special voltage
UL/ CSA Certification
OverviewFeatures
Quality is our Drive.PETER electronic
wood-working machines (e.g., panel-sizing saws, band saws, moulding and planing machines, buttreducers), conveyor systems with long coast-down times, centrifuges, vibration screening machines,vibrating conveyor systems, welding and plastering machines, machines for the meat-processingindustry, stone-working machines, metal-working machines, plastics processing machines
Applications
Included Not includedOn request
VB LT VB25 VB36 VB 40...600
6 bis 30A
VB-6/25/30L (LP)
6/25/30A 25A 36A 40 bis 600A
60A 100A
only LP
PETER electronic GmbH & Co. KG Bruckäcker 9 D-92348 Berg www.peter-electronic.com
Phone:+49(0)9189/4147-0 Fax:+49(0)9189/4147-47 eMail:[email protected]
07/
2017
Our range of products:
Soft Starters
Braking Devices
Combined Motor Start and Braking Devices
Variable Speed Drives
DC-Controllers
Monitoring Modules
www.peter-electronic.com