Upload
elcom-kommunikation-gmbh
View
287
Download
13
Tags:
Embed Size (px)
DESCRIPTION
The complete product range.
Citation preview
General catalogue 2010
Communications and security
2
Made in Neckarsulm and Friedersdorf. For over 25 years.
What good is modernity without grown values? That's why ELCOM is not only committed to technological progress, but also to our locations in Neckarsulm and Friedersdorf. To manufacturing quality that both satisfies individual needs and answers all questions – for more than three decades. Encounter ELCOM specialists from all areas of application technology and experience service with a personal touch.
Neckarsulm: Central
Friedersdorf (near Bitterfeld): Subsidiary
3
Future market: The true 2-wire video door intercom system.
One of the most important cornerstones of our corpo-rate philosophy includes providing products that pre-cisely meet your needs.During the introduction of the strand-saving 1+n tech-nology already more than 25 years ago, we have set trend-setting signals and offered functional, economi-cal and easy to install technology.We have consistently pursued this path with you and now again give you a technology – with our new i2-BUS 2-wire video system – that meets the requirements of fast, affordable and demand-oriented installation.We are sure to reflect the spirit of the times thanks to numerous possible applications and enormous simplifi-cation during renovation and retrofitting. An interest-ing future market for the electrical engineering trade.
BVF-500 2-wire video hands-free intercom
4
i21+n
1+n technology
Developed by ELCOM's groundbreaking research and patented since 1986, 1+n
technology has become a trusted standard technology for residential construc-
tion. As a cost-effective, user-friendly system primarily for audio communica-
tion, the use of 1+n technology guarantees a high degree of security.
++ cost-effective system components
++ very simple conversion of existing bell systems
++ ideal for small installations in buildings in the 1 to 3 family range
Technologies
(n = number of intercoms)
HAT-402
HAT-402
HAT-402
Distribution board
BHT-200
BHT-200
BHT-200
Distribution board
i2 bus audio technology
The technological state of the art, i2 bus technology by ELCOM, is the perfect
solution for use in high-end residential construction, office facilities and ad-
ministration buildings. Flexible in use and thus highly functional even with a
few components, i2 bus technology allows you to utilise all the options of
modern building communications.
++ flexible system technology, easy set up
++ high flexibility for complex infrastructure
++ basic technology for additional extensions and connections
1+n system technology i2 bus audio system
Door opener
4+n
1 1 1 1
2
2
2
2
2
4
Door opener
5
2DVIDEO
6DVIDEO
2 + 2 + 2
2 + 2 + 2
2 + 2 + 2
2 + 2 + 4
i2 bus 2-wire video technology
The i2 bus 2-wire video system is an advancement of the familiar i2 bus audio
system. In addition to the functions of calling, speaking and door opening, it
can now also transmit a video signal through the two wires of the bus line. The
maximum capacity is currently limited to 32 video intercoms and up to 16 door
stations.
++ Line-saving 2-wire video system technology
++ Ideal video technology for the renovation market and conversions
++ Mixed operation as needed between video and audio components
i2 bus 2-wire video system
BVF-500
2
2
2
2
4
BVF-500
BVF-500
Door opener
Distribution board
i2 bus 6-wire Video Technology
The i2 bus 6-wire video technology permits the design of very complex build-
ing communications systems supporting up to 256 units. The use of multiplex
couplers allows the construction of very flexible infrastructures. A number of
special switching modules provide suitable solutions for any application case.
++ Ideal for the implementation of highly complex infrastructures
++ Very advanced system with a large number of special solutions
++ Flexible building management functions using multiplex couplers
i2 bus 6-wire video system
BVF-200
2
BVM-280
BVF-260
Door opener
Distribution board
6
0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F
10
0 0
0
B
1
8
i2 bus system addressing
The i2 bus technology provides you with all
the options of modern building communica-
tions. Whether video communication on the
Intranet, connection to telecommunications
systems or the monitoring of multiple entranc-
es, with this system you will always be up to
date.
.. ELCOM's rotary encoder technology makes
addressing simple and cost-effective one-
man commissioning a snap.
.. Preconfiguring setup makes particularly fast
on-site commissioning a possibility.
.. The i2 bus technology allows the addressing
of up to 256 units.Miller
Meyer
Smith
Group address
Telephone address
BHT
Door speaker
BHT
BHT
Miller Meyer Smith
Call button
Group address
Telephone address Telephone address
Group address
Call button expander Call button expander
Technology
7
i2 bus system overview
Video transfer on the Intranet
Side entrance
NetworkTCP/IP Intranet
BPI-200Interface
BVS-200Video serverEthernet Audio,
Data,Video
PC
PC PC
PC
BVU-100
Video door station
BVM BVF
Junction box
Telephone systemBTI-256
Interface
Telecommunications
Audio and video can be combined with speaker and
hands-free intercom
ExternalAnalogue outFTZ123D122-wire TFE Call button
BVM with additional but-tons for video monitoring and home automation
BVM BHT BVF
VSU AVM
TV video monitoring Application: "Concierge"
Antenna/Cable TV terminal
Concierge software
RS232 interface
BVC-280 Concierge
PC
TV
Distribution boardExternal camera
Home automation functions
8
2DVIDEO
2010/01/2712:52:00
49/50
New features at a glance
BVF-260 i2 bus 2-wire video Video image storageNew faceplates - new colours The best system for modern installations For up to 256 units
A new and wide selection of colours and
shapes. In addition to the two new trendy col-
ours of umber and graphite, we now also of-
fer the BVF-260 designer faceplates with
rounded corners. The attractive result is an
slimmer look with the same dimensions.
A complete video system via only two wires.
Ideal for renovations or modern new installa-
tions. The i2 bus audio decoupler allows de-
vices to be integrated from the i2-Bus audio
system, making it possible to implement a
mixed system with simple video equipment as
needed at a later date.
Convenience features: Video image storage
Would you like to know who came to visit
while you were away? The new video image
storage makes it possible. The device supports
up to 256 units and stores up to 1024 images.
starting on page 14 starting on page 24 Page 32
BTC-500
BVF-500
2
9
ZENTRA call button
New sets and kits ESTA stainless steel The new STABILA
The new standard for our door stations
The right solution for every case Our classic solutions, thoroughly reworkedNew call button - modern look
The new basic call button for ESTA and STA-
BILA door stations and sets. In addition to its
modern appearance, the conveniently operat-
ed call button has integrated LED lighting with
very homogeneous illumination, a high-quali-
ty microswitch and a stainless steel push but-
ton. The call button is extremely resistant, and
available either as a complete built-in call but-
ton or as a flush back-mounted version.
With the new ZENTRA call button, the ESTA
door station in matte brushed stainless steel
can get a new, modern appearance.
The door stations are now also available with
new special security screws.
In the area of our sets and kits, we can now
offer additional practical and cost-effective
variants. That makes conversion of existing
systems particularly simple and inexpensive.
With our audio and video kits, we provide all
the system components you need in a com-
plete package.
Our classic in a new guise. With the introduc-
tion of the new Zentra call button, our STABI-
LA program has also been thoroughly re-
worked. A new, delicate wall-mounted profile
and a narrow speaker grill profile are only two
of the many new features.
starting on page 42 starting on page 78 starting on page 90
10
i2
1+n
Table of contents
Communications systems
Hands-free colour video intercoms
Colour video intercoms
Audio intercoms
Outdoor colour cameras
Built-in cameras
System components for 2-wire video
i2 bus audio system components
System components for 6-wire video
System components for multiplex couplers
Video image storage
Video concierge station
Telecommunications interface
Video communication on the Intranet
TV video technology
Modular display call system
i2-BUS System
1+n SystemCommunications systems
HAT-402 audio intercom
Electronic components
Sets and kitsComplete systems
i2 bus colour video sets
i2 bus compact colour video sets
i2 bus compact audio sets
1+n audio sets
1+n audio kits
i2 bus audio kits
i2 bus colour video kits
Access controlComponents and systems
Keypass
Fingerprint
Code-Lock
Door openers
12
14 – 18
19
20 – 21
22
22 – 23
24 – 25
26 – 27
28 – 29
30 – 31
32
33
34
35
36
37
38
40
41
42
44 – 47
48 – 49
50 – 51
52 – 55
56
57
58 – 59
60
62
63
64
65
11
S
M
E
Door stations and post box systems
in ELOXAL and RAL colours
Flush-mounted door stations
Wall-mounted door stations
Flush-mounted built-in set
Doorbell panels
Flush-mounted letter box systems
Pass-through letter box systems
Wall-mounted letter box systems
Fence-mounted letter box systems
Free-standing letter box systems
MODESTA
ESTA
Modular stainless steel door stations
and pedestals
Design/Application examples
Modules
Panel lights
Pedestals
Wall-mounted frames
Flush-mounted frames
Stainless steel door stations
and letter box systems
Flush-mounted door stations
Doorbell panels
Flush-mounted letter box systems
Wall-mounted letter box systems
Pass-through letter box systems
Fence-mounted letter box systems
Free-standing letter box systems
STABILA
Replacement partsOverview
DOMINO call button and function modules
Replacement parts, tools
Item list
General business terms, contacts
Services
66
68 – 69
70 – 72
73
74 – 75
76
77
78
80 – 83
82
84
85
86 – 87
88
89
90
92 – 93
94
95
96
97
98
99
100
101
102
104
105 – 109
110 – 113
114 – 115
12
13
i2
i2-B
US
Syst
em
Communications systemsThe ELCOM i2 bus technology is the ideal solution for use in modern residential construction, office facilities and administration buildings.
Useful and highly functional in a variety of applications, the i2 bus tech-nology lets you utilise all the options for future-oriented building com-munications – from connection to telecommunications systems to video communication on the Intranet.
i2-B
US
Syst
em
14
The perfect transition between the structural concrete of the entry
area and room design is provided by the BVF-260 hands-free video
intercom. The integration of shining glass with galvanised aluminium
is stunning due to the variety of options provided by the designer
faceplate.
Hands-free colour video intercom BVF-260
Crystal clear design, perfect integration
Black, rounded Graphite, rounded Umber, rounded Mint green, rounded White, rounded
1515
i2-B
US
Syst
em
Touchpads for touch-sensitive operation un-
derscore the refined nature of this unit. The
cool, smooth glass surface is fascinating due
to its touch.
16
6DVIDEO
BVF-260
The BVF-260 is the technological state-of-the-art, orienting itself to the
needs of the user with its easy-to-use 3-button menu. The latest in TFT
display technology and a screen diagonal of 10 cm ensure crisp, sharp
contours and an excellent, naturally coloured image quality.
BVF-260 Crystal clear design, perfect functionality
.. 10 cm (4") colour TFT display
.. Brilliant colour quality
.. Good view at side angles
.. Automatic and manual activation of display
.. Exclusive glass designer faceplate
.. Operated with sensor buttons and on-screen menus
.. Door opening, call acceptance, manual camera activation
.. 12 ring tone melodies
.. Ring tone volume configurable, ring tone can be
disabled or enabled.. Internal calls to other intercoms.. Status displays for calls and intercom calls.. Full- and half-duplex hands-free calls.. Cost-effective one-man installation.. Flush mounting (Please order flush-mounting box separately)
.. Dimensions of front plate (W x H): 135 x 220 mm
.. Dimensions of flush-mounted boxes (W x H x D): 120 x 190 x 55 mm
Hands-free colour video intercom
Faceplate, blackBVF-260/E-SW, squareBVF-260/R-SW, rounded
Faceplate, whiteBVF-260/E-WS, squareBVF-260/R-WS, rounded
Faceplate, umberBVF-260/E-BR, squareBVF-260/R-BR, rounded
Faceplate, mint greenBVF-260/E-GN, squareBVF-260/R-GN, rounded
Faceplate, graphiteBVF-260/E-GR, squareBVF-260/R-GR, rounded
Designation Variant Item no. DG
BVF-260 Basic module for 6-wire video
BVF-260/BM Video hands-free intercom Base module 183.262.0 2
BVF-260 Designer faceplate, square
BVF-260/E-SW Designer faceplate, square black 183.262.2 2BVF-260/E-WS Designer faceplate, square white 183.262.3 2BVF-260/E-BR Designer faceplate, square umber 183.262.4 2BVF-260/E-GN Designer faceplate, square mint green 183.262.5 2BVF-260/E-GR Designer faceplate, square graphite 183.262.6 2
Designation Variant Item no. DG
BVF-260 Flush-mounted box
BVF-UPK-UNI Flush-mounted box 300.090.1 2
BVF-260 Designer faceplate, rounded corners
BVF-260/R-SW Designer faceplate, rounded black 183.264.2 2BVF-260/R-WS Designer faceplate, rounded white 183.264.3 2BVF-260/R-BR Designer faceplate, rounded umber 183.264.4 2BVF-260/R-GN Designer faceplate, rounded mint green 183.264.5 2BVF-260/R-GR Designer faceplate, rounded graphite 183.264.6 2
17
6DVIDEO
i2-B
US
Syst
emHands-free colour video intercom
BVF-230Wide view, great security
Stainless steel – the ideal material for modern design-oriented architec-
ture and living. The matte brushed stainless steel plate with integrated
buttons "View", "Talk", and "Open door" matches the general trend
and will catch the eye in any modern apartment.
.. 10 cm (4") colour TFT display
.. Brilliant colour quality
.. Good view at side angles
.. Automatic and manual activation of display
.. Exclusive stainless steel frame designs
.. Operated with stainless steel buttons and on-screen menus
.. Door opening, call acceptance, manual camera activation
.. 12 ring tone melodies
.. Ring tone volume configurable, ring tone can be
disabled or enabled.. Internal calls to other stations.. Status displays for calls and intercom calls.. Full- and half-duplex hands-free calls.. Cost-effective one-man installation.. Flush mounting (Please order flush-mounting box separately)
.. Dimensions of front plate (W x H): 135 x 220 mm
.. Dimensions of flush-mounted boxes (W x H x D): 120 x 190 x 55 mm
Video hands-free module Including stainless steel front panel(Shipped without UPK)
- See above for technical data
BVF-230/E
Designation Variant Item no. DG
BVF-230 Hands-free module for 6-wire video
BVF-230/E Video hands-free intercom Front: square 183.232.0 2
BVF Flush-mounted box
BVF-UPK-UNI Flush-mounted box 300.090.1 2
18
2DVIDEO
6DVIDEO
Hands-free colour video intercom
BVF-200, BVF-500Hands-free talking, colour viewing!
.. BVF-500 for 2-wire video system (page 24)
.. BVF-200 for 6-wire video system (page 28)
The BVF is attractive for its high-quality plastic design. The compact
construction and clear, harmonious lines of the front part characterise
the dynamically flat design, making the effort of flush mounting super-
fluous. The latest in TFT display technology and a screen diagonal of
6 cm ensure crisp, sharp contours without the slightest flicker, as well
as excellent naturally coloured image quality.
.. 6 cm (2.5") colour TFT display
.. Brilliant colour quality, good view at side angles
.. Automatic and manual activation of display
.. Door opening, call acceptance
.. LED-lit function keys
.. Ring tone can be enabled/disabled
.. Ring tone volume adjustable
.. 12 ring tone melodies
.. LED status displays for calls and intercom calls
.. Full- and half-duplex hands-free calls
.. Wall-mounted
Additional technical features- Free assignment of ring tones to door,
floor or intercom calls- Manual activation of the last door station
calling (can be disabled)- Automatic call end after 3 minutes- Address configuration using rotary switch- 3 intercoms can be used in parallel- Wall-mounted
- Colour: white- Dimensions (W x H x D): 100 x 192 x
35mm
Video table console (Shown with BVF-200)For use in the office. Suitable for BVF-200 and BVF-500 hands-free intercoms
3 m connector cable with RJ-45 plugs included in delivery.
Note: BVV video distributor required.
TKV-200
BVF-200 / BVF-500
Designation Item no. DG
BVF-500 for 2-wire video
BVF-500 Hands-free colour video intercom 183.500.0 2
BVF-200 for 6-wire video
BVF-200 Hands-free colour video intercom 183.200.0 2
TKV-200 Table console for BVF-200/500
TKV-200 Video table console 230.120.0 2
19
6DVIDEO
i2-B
US
Syst
emColour video intercom
See in natural colours using the latest in TFT colour display technology
in the BVM-280 internal video phone. Dynamic design, excellent image
quality and well-considered, uncomplicated technology are just a few
of the features of the BVM-280:
BVM-280Flat, coloured, without compromise and with a 10 cm (4") display
Video intercomColour: whiteDimensions (W x H x D): 125 x 260 x 57 mm
Video intercomColour: platinumDimensions (W x H x D): 125 x 260 x 57 mm
TKV-280
Video table console(Shown with BVM-280)For use in the office.3 m connector cable with RJ-45 plugs included in delivery.
Note: BVV video distributor required. Switch contact without function.
.. 10 cm (4") colour TFT display
.. Brilliant colour quality, good view at side angles
.. Automatic/manual activation of display
.. Convenient magnetic holder for handset
.. Door opening, 4 programmable keys
.. LED-lit function keys
.. Ring tone can be enabled/disabled
.. Ring tone volume adjustable
.. 12 ring tone melodies
.. Internal calls to other intercoms
.. LED status display for calls
.. Wall-mounted
BVM-280
Designation Colour Item no. DG
BVM-280 for 6-wire video
BVM-280 Video intercom white 182.280.0 2BVM-280 Video intercom platinum 182.284.0 2
TKV-280
TKV-280 Video table console 230.128.0 2
20
Audio intercoms
BHT-200, BHT-280
With its clear, harmonious lines in the front, consistent combination of
high-quality materials and exclusive processing, the BHT-200 defines
one of the most elegant options in modern access control.
.. 4 function keys
.. 3 intercoms can be used in parallel
.. Call terminator with control display
.. Convenient magnetic holder for handset
.. 12 ring tones selectable, 6 of which are gong sounds
.. storey call forwarding through the i2 bus
.. Call waiting if a connection is active
.. Listening-in prevention
.. Wall-mounted
.. Cost-effective one-man installation
.. Colour: white
.. Dimensions (W x H x D): 100 x 192 x 50mm
BHT-280
i2 bus intercomSee above for functions, along with:8 illuminated function keys, of which 4 can be programmed with special functions
Special functions: Internal call, parallel call, access gate, door opener control, different switching functions
Colour: whiteDimensions (W x H x D): 100 x 192 x 50 mm
Designation Variant Item no. DG
Audio intercoms
BHT-200 Intercom white 170.200.0 2BHT-280 Intercom white 170.280.0 2
21
i2-B
US
Syst
emAudio intercoms
BFT-200
The ideal candidate for efficient residential construction. Clear, attrac-
tive design, robust plastic housing, without mechanical add-on parts.
Cost-effective installation due to one-man start-up.
.. Hands-free conversation in full- or half-duplex mode (switchable)
.. 4 function keys
.. 3 intercoms can be used in parallel
.. Call terminator with control display
.. 12 ring tones selectable, 6 of which are gong sounds
.. Intra-floor call forwarding through the i2 bus
.. Call waiting if a connection is active
.. Listening-in prevention
.. Wall-mounted
.. Cost-effective one-man installation
.. Colour: white
.. Dimensions (W x H x D): 100 x 192 x 35mm
NSG-200
NSG-200, i2-BUS Secondary signal deviceFree assignment of ring tones to door, storey or internal calls. Ring tone volume adjustable. 12 ring tones selectable, 6 of which are gong sounds. Connec-tion for a floor-wide call button. Storey call forward-ing through the i2 bus. ABS wall-mounted housing.
Colour: whiteDimensions (W x H x D): 129 x 129 x 33 mm
TKA-UNI
Tabletop audio console(Shown with BHT-200)For use in the office. Suit-able for the BHT-200/280 and BFT-200.
3m connector cable with RJ-45 plugs included in delivery.
Designation Variant Item no. DG
Audio intercoms and accessories
BFT-200 Hands-free intercom white 171.200.0 2TKA-UNI Table console (audio) 130.120.0 2 NSG-200 Secondary signal device white 170.152.0 2
22
6DVIDEO
Built-in and exterior colour cameras
CCV-200, CCS-200/-210
CCV-200
CCV-200Built-in colour camera with integrated IR illumination for 6-wire videoAutomatic switching from colour to B/W mode by low illumination. Mechanically adjustable: +/-20° horizontal/verticalOpening angle: 74° horizontal, 55° verticalResolution: 320.000 PixelsLight sensitivity: 0,1 lux / F2.0Video output: 1Vpp symmetrical, Z=100 OhmPower supply: 15VDC / 200mA
CCS-200 / -210
CCS-200Outdoor colour camera in stainless steel housing for 6-wire videoMechanically adjustable: +/-90° horizontal/verticalOpening angle: 63° horizontal, 49° verticalResolution: 320.000 PixelLight sensitivity: 0,2 Lux / F2.0Video output: 1Vpp symmetrical, Z = 100 ohmsPower supply: 15VDC / 150mADimensions, Socket: Ø 104 x T 25 mm Dimensions, Camera rod: Ø 24 x L 83 mm
CCS-210Long-range colour outdoor camera in stainless steel housing for 6-wire videoTechnical data as for the CCS-200, but:Opening angle: 21° horizontal, 16° vertical
The CCV-200 built-in camera module permits positioning separate
from the door electronics. CCS rod cameras can be discretely hidden to
provide unobtrusive monitoring of the entry area. Here, the CCS-201
long-range outdoor camera is particularly well suited for a detection
area over long distances.
General installation instructions for camera modules:
Cameras may not be directed towards:.. Lamps or other light sources .. Direct sunlight.. Very bright image background or one with strong contrast.. Reflecting walls.. Recommended installation height approx. 1.60 m
Recommended area of use for
CCS-200 CCS-210
Camera
Distance
Horiz
onta
l im
age
sect
ion
Opening angle
Camera
Distance
Imag
e se
gmen
t
Opening angle
Opening angle
23
2DVIDEO
6DVIDEO
i2-B
US
Syst
emBuilt-in colour camera
BTC-200, BTC-500
The new built-in camera with door speaker has a mechanical adjust-
ment range of nearly 180°. Even under unfavourable environmental
conditions, the wide pivot range allows ideal adjustment of the camera
in any direction. After dark, the automatic switch from colour to B/W
mode and the built-in infrared lighting always ensures optimum view-
ing. Combining the camera and speaker saves you space, or makes
room for additional functional modules.
.. Feedback suppression using electronic speech control
.. Volume control
.. Address configuration using rotary switch
.. Terminal for light buttons
.. Door opener function at any time (can be switched)
.. Acknowledgement tone when call button pushed (can be switched)
BTC-200Camera/door speaker combination with inte-grated IR illumination for 6-wire videoAutomatic switching from colour to B/W by low illumination.
Mechanically adjustable: +/- 47º horizontal/verticalOpening angle: 80º horizontal, 60º verticalResolution: 320.000 PixelsLight sensitivity: 0,1 lux/F2.0Video output: 1 Vpp symmetrical, Z=100 OhmPower supply: 15VDC / 200mA
BTC-500Camera/door speaker combination with inte-grated IR illumination for 2-wire videoTechnical data equivalent to the BTC-200.
BTC-200 / BTC-500
Opening an
gle
Camera
Distance
Horiz
onta
l im
age
sect
ion
Designation Item no. DG
BTC Camera module for 6-wire video
BTC-200 Built-in camera/Door speaker COLOUR 181.620.0 2
BTC Camera module for 2-wire video
BTC-500 Built-in camera/Door speaker COLOUR 181.650.0 2
Designation Item no. DG
CCV Camera module for 6-wire video
CCV-200 Built-in colour camera 181.320.2 2
CCS Outdoor cameras for 6-wire video
CCV-200 Stainless steel colour outdoor camera 181.420.0 2CCS-210 Remote stainless steel colour outdoor camera 181.421.0 2
24
BVF-500
2DVIDEO
System components for i2 bus 2-wire video
2-wire video series circuit
BTE-116 Door opener-17/17E
DISTRIBUTION BOARD
MAIN ENTRY
BVF-500
This is a schematic functional view. Please consult our i2 bus 2-wire video system manual for planning and installation.
ATTENTION
i2 bus 2-wire video
MULTIPLE ENTRANCES
+ components and wiring; see main
entrance
+ components and wiring; see main
entrance
Floor call button
NTR-812Transformer
BVF-500
Floor call button
BVF-500
Floor call button
NGV-500Power supply
BLA-100Light timer
BVF-500
Floor call button
Floor call button
BVF-500
Floor call button
BVV-501/BVV-521
2-wire video branch line
BVV-502/4Distributor
Floor call button
2-wire video star wiring configuration
BVV-501/BVV-521
BVV-501/BVV-521
BTC-500Camera
BTC-500Camera
RSR-500Decoupler
BAA-520Decoupler
BAA-500Decoupler
2-wire video/audio decoupler
i2 bus 2-wire video i2-BUS Audio
SIDE ENTRANCE
i2 bus 2-wire video
BVV-502/4Distributor
BTC-500Camera
BVF-500
BVF-500 BFT-200
BFT-200
BHT-200
BHT-280
i2 b
us f
unct
ion
sche
me
2-w
ire
vide
o sy
stem
BSV-500Bus line power supply
Optional wiring
Optional wiring
Optional wiring
BVV-501/BVV-521
BTC-500Camera
+ components and wiring; see main
entrance
BVV-522/4
25
i2-B
US
Syst
em
Overview
System components for i2 bus 2-wire video
BSV-500Line power supplyfor the i2 bus 2-wire video system for the power sup-ply of the door speaker and camera. Integrated audio decoupler. Overload and overheating protection.
Input: 28 VDC (NGV-500)Output: i2-BUS 2D-VideoDim.: 52x92x63mm (W/H/D)Space requirements: 3 TE
NGV-500Power supplyfor supply of the BSV-500.
Input: 230 VACOutput: 28 VDC / 1.25ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
BLA-100Lighting timer Intelligent lighting timer with bus interface. Adjustable time from 30 sec – 8 min. Special functions: Light warning, constant on, door assignment. Switch contact max. 230V/16A.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
BVF-500Video intercomfor 2-wire video.Details: see page 18
BTC-500Camera/door speakerfor 2-wire video.Details: see page 23
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version
NTR-812Power transformerSafety transformer with PTC fuse. For power supply of the BTC-500.
Input: 230 VACOutput: 12 VAC / 1.5 ADim.: 35x90x60mm (W/H/D)Space requirements: 2 TE
BTE-116Call button expander For the connection of 16 call buttons. Addressing using rotary encoder. Simple con-nection of call buttons. Plug-gable connector cable to the BTC-500 (Length: 300 mm). At most 16 bus key expand-ers can be cascaded.
Dim.: 25x76x25mm (W/H/D)
BVV-502, BVV-522Two-way video distributorFor video distribution of an incoming bus line to two outgoing bus lines. Alternative to the attach-ment of 2 door stations.
BVV-502: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BVV-522: UP versionDim.:42x51x16mm (W/H/D)
BVV-504, BVV-524Four-way video distributorFor video distribution of an incoming bus line to four outgoing bus lines.Alternative to the attach-ment of 4 door stations.
BVV-504: HS version, 2 TEDim.: 35x94x58mm (W/H/D)BVV-524: UP versionDim.: 42x51x16mm (W/H/D)
BVV-501, BVV-521Video branchFor the connection of a branch line to the video bus line. Alternative to the attachment of a (floor) door station.
BVV-501: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BVV-521: UP versionDim.: 42x51x16mm (W/H/D)
BAA-500, BAA-520Audio decouplerFor decoupling the i2 audio bus from the 2-wire video bus for the operation of audio components. 2-wire video loop.
BAA-500: HS version, 1 TEDim.: 18x94x58mm (W/H/D)BAA-520: UP versionDim.: 42x51x16mm (W/H/D)
RSR-500Call switching relay and audio decouplerFor installation into the BHT-200, BHT-280, or BVF-200 audio intercoms to permit mixed operation in 2-wire video systems. Includes potential-free contact with up to 24V, 1A
Dim.: 28x26x14mm (W/H/D)
Designation System Variant TE Item no. DG
Power supply
BSV-500 Line power supply 2-wire video Top-hat rail 3 170.415.0 2NGV-500 Video power unit 2-wire video Top-hat rail 3 231.415.0 2NTR-812 Power transformer i2-BUS Top-hat rail 2 120.100.4 2
Call button expander
BTE-116 Call button expander i2-BUS fastening tray - 170.311.6 2
Distributor and connection
BVV-502 2-way video distributor 2-wire video Top-hat rail 1 180.650.2 2BVV-522 2-way video distributor 2-wire video for UP box - 180.652.2 2BVV-504 4-way video distributor 2-wire video Top-hat rail 2 180.650.4 2BVV-524 4-way video distributor 2-wire video for UP box - 180.652.4 2BVV-501 Video branch 2-wire video Top-hat rail 1 180.650.1 2BVV-521 Video branch 2-wire video for UP box - 180.652.1 2
Decoupler for i2 bus audio
BAA-500 Audio decoupler 2-wire video Top-hat rail 1 180.650.0 2BAA-520 Audio decoupler 2-wire video for UP box - 180.652.0 2
Decoupler and call switch relay for i2 bus audio
RSR-500 Audio decoupler, Call switch relay 2-wire video for BHT-Built-in - 190.185.0 2
Lighting timer
BLA-100 Lighting timer i2-BUS Top-hat rail 3 190.110.0 2
26
i2
i2 bus audio system components
Overview
ELA-100 Door electronics i2 bus built-in door speaker with electronic speech control and feedback suppression, volume and microphone con-trols. Address configuration using rotary switch. Connection option for light barriers. Potential-free door opening switch contact (max. 24V/1A), door opening function at any time (can be disabled), acknowledgement tone when call button pushed (can be switched), connec-tion for call button expander (BTE).
Dimensions: 75 x 99 x 27 mm (W/H/D)
BTE-116Call button expander For the connection of 16 call buttons. Address configuration using rotary switch. Simple connection of call buttons. No matrix switching necessary! Pluggable connector cable to the door speaker (L: 300 mm). At most 16 bus key expanders can be cascaded.
Dimensions: 25 x 76 x 25 mm (W/H/D)
Storey call button
External signal units
Programmable convenience keys
1. Secondary line (with side entrance)
Primary line
Storey call through i2 bus, plus switch
contactBER-100
2. Secondary line
RSR-200
SIDE ENTRANCE
BHT-200
BHT-280
BHT-200 BFT-200
i2-BUS
i2 b
us f
unct
ion
sche
me
2-w
ire
audi
o sy
stem
ELA-100
BTE-116 Door opener-17/17E
Switch relay with two potential-free contacts, switches
24V/1A
Switch relay for convenience keys of
the BHT-280, BVM-280, BVF-260, and BVF-230
Switch relay for selective door opening, door opener contact in
distribution board
Switch relay for special controls,
contact rate 24V/1ATimer: 1-18 sec.
stairway lighting timer, switches
230V, timer: 30-420 sec.
DISTRIBUTION BOARD
This is a schematic functional view. If a system is built with auxiliary lines, the main line may not have intercoms installed on it. Please consult our i2 bus system manual for planning and installation.
ATTENTION
BSR-110 BSR-120 BSR-130 BSR-200 BLA-100
BKV-100Bus line coupler
BKV-100Bus line coupler
BSV-100Bus line power supply
NTR-812Transformer
NTR-812Transformer
ELA-100Door
electronics
BTE-116 Door opener-17/17E
MAIN ENTRY
i2-BUS
27
i2-B
US
Syst
em
Overview
i2 bus audio system components
BSV-100Line power supplyi2 bus power supply for supplying the door speaker and up to 48 intercoms. Electronic overload protec-tion. Functional control and overload display with LED. Top-hat rail mounting.
Dim.: 156x58x86 (W/H/D)Space requirements: 9 TE
NTR-812Power transformerSafety transformer with PTC fuse. Top-hat rail mounting.
Input: 230 VACOutput: 12 VAC / 1.5 ADim.: 35x90x60mm (W/H/D)Space requirements: 2 TE
BKV-100Line couplerAutomatically couples main and auxiliary lines. Power supply for the auxiliary line with up to 32 intercoms. Separate voice circuit in aux-iliary line. Electronic overload protection. Status display for data transmission and cou-pling. Top hat rail mounting.Dim.: 156x58x86 (W/H/D)Space requirements: 9 TE
BSR-110 Switch relay(Control, Door opener button)BSR-120 Switch relay(Control I/O button)Switch relay for special con-trols. Selective control by door and group addresses. Duration turned on:1 – 18 sec. adjustable. Switch contact: max.24V/1ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
BSR-130Switch relay Control by BVF-260/230, BVM-280 video intercoms or the BHT-280 intercom. Toggle/timer modes, ack-nowledgement to the inter-com, duration turned on: timer operation, 1 to 18 sec.
Switch contact: max.24V/1ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
BER-100Storey call moduleModule for forwarding storey calls and controlling the floor door opener. Compact housing for mounting in a UP outlet. Potential-free switching contact, up to 24V/1A
Dim.: 42x51x16mm (W/H/D)
BPI-210InterfaceFor connection of home automation systems. RS-232 interface with protocol description. Video output using cinch jack. Audio input/output using jacks. Housing for wall mounting.
Dimensions: 185 x 215 x 42 mm (W/H/D)
BSR-200Switch relayWith 2 potential-free switch contacts for inter-com-specific switching functions. Addressable for 1 – 16 units.
Switch contact: max.24V/1ADim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
RSR-200Call switch relayFor installation in the BHT/BFT-200 intercom.Potential-free contact, up to 24 V/1A
BLA-100Lighting timer Intelligent lighting timer with bus interface. Adjust-able time from 30 sec – 7 min. Special functions: Light warning, constant on, door assignment. Switch contact max. 230V/16A.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version
Designation System Variant TE Item no. DG
Door electronics and call button expander
ELA-100 Door electronics i2-BUS - - 170.212.0 2BTE-116 Call button expander i2-BUS Bef.-Wanne - 170.311.6 2
Power supply and line coupler
BSV-100 Line power supply i2-BUS Top-hat rail 9 170.411.0 2BKV-100 Line coupler i2-BUS Top-hat rail 9 190.121.0 2NTR-812 Power transformer i2-BUS Top-hat rail 2 120.100.4 2
Switch relay
BSR-110 Switch relay, door opener i2-BUS Top-hat rail 3 190.111.0 2BSR-120 Switch relay, I/O button i2-BUS Top-hat rail 3 190.112.0 2BSR-130 Switch relay, comfort functions i2-BUS Top-hat rail 3 190.114.0 2BSR-200 Switch relay, 2 potent. Contact i2-BUS Top-hat rail 3 190.113.0 2RSR-200 Call switch relay i2-BUS for BHT-Built-in - 190.180.0 2
Floor call module
BER-100 Floor call module i2-BUS for UP box - 190.200.0 2
Home automation interface
BPI-210 Home automation interface i2-BUS Wall mounted - 190.305.0 2
Lighting timer
BLA-100 Lighting timer i2-BUS Top-hat rail 3 190.110.0 2
28
6DVIDEO
Video
Video
System components for i2 bus 6-wire video
Single video line
BVF-200
BVF-260
i2-BUS
Multiple video lines (star-wiring)
UP video distribu-tor for star wiring
configuration, 3-way
For external signal units, installation in BVF-200
For external signal units, installation
in BVF-230, BVF-260, BVM-100
BSR-100
BVF-200
Power supply
i2-BUS
Power supply
Storey call button
BVV-223RSR-220
i2 b
us 6
-wir
e vi
deo
sys-
tem
fun
ctio
nal s
chem
atic
BKV-100Bus line coupler
DISTRIBUTION BOARD
NGV-850Power supply
NTR-812Transformer
HS video distributorfor star-wiring configuration,
3/6-way
All i2 bus audiocomponents can be integrated into the system. See pages
26 - 27.
BVV-203/6
BSV-200Bus line power supply
HS video switching unit for multi-door
systems
NGV-850Power supply
BVU-100Switch
BTE-116 Door opener-17/17E
MAIN ENTRY
This is a schematic functional view. All i2 bus audio components can be integrated. If a system is built with auxiliary lines, the main line may not have intercoms installed on it. Please consult our i2 bus system manual for planning and installation.
WARNING
ELA-100Door
electronics
CCV-200Camera
MULTIPLE ENTRANCES
BVM-280
Programmable convenience keys
BTC-200Camera
CCV-200Camera
+ components and wiring; see main
entrance
+ components and wiring; see main
entrance
BBS-256Storage
Central image storage for all
units
29
i2-B
US
Syst
em
Overview
System components for i2 bus 6-wire video
BSV-200Line power supplyi2 bus power supply for supplying the door speaker and up to 48 intercoms. Power is supplied by an NGV-850. LED func-tion display, thermal overload protection.
Input voltage: 15 VDC / I in=2x I outOutput i2 bus: 17 – 22 VDC/300mA/700mA (30 sec.)Dimensions: 52 x 92 x 63 mm (W/H/D)Space requirements: 3 TE
NGV-850Video power supplyCentral power unit to sup-ply the i2 bus video com-ponents. Control display.
Input: 230 VACOutput: 15VDC / 2ADim.: 77x93x56mm (W/H/D)Space requirements: 3 TE
VSU-100Video converter Converts a standard 75 ohm video signal into a symmetrical i2 bus video signal for transmission on a 2-wire line.
BVU-100Video switch Video switch unit for multiple doors, to switch between video cameras. Can be cascaded for mul-tiple doors. Power supply and control through the i2 bus. Function display when switching is active.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
BVV-223Video distributor For the star-shaped distri-bution of the video signal with three outputs. Com-pact housing for mounting in a UP outlet.
Dim.: 42x51x16mm (W/H/D)
BVV-203, BVV-206Video distributor For the star-wiring distribu-tion of the video signal with three or six outputs. Can be cascaded on the input side, jumper for video termination, adjustment control for video quality.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
RSR-220Call switch relayFor installation in the BVF-200 video intercoms.Potential-free contact, up to 24 V/1A
BSR-100 Call switch relayFor installation in the BVF-230, BVF-260, or BVM-100 video intercoms.Potential-free contact, up to 24 V/1A
VSU-110Video converterConverts the symmetrical i2 bus video signal into a standard 75 ohm video sig-nal for connection to moni-toring screens, long-term recorders, AV modulators, video cards and so on.
BBS-256Video image storageFor the storage of single video frames when using the video intercom.For up to 256 units.
More technical details can be found on page 32.
AttentionAdditional i2 bus compo-nents are needed for the audio functions.
See pages 26 - 27.
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version
Designation System Variant TE Item no. DG
Video supply
BSV-200 Line power supply 6-wire video Top-hat rail 3 170.412.0 2NGV-850 Video power unit 6-wire video Top-hat rail 5 231.410.5 2
Video distributor
BVV-203 Video distributor, 3 outputs 6-wire video Top-hat rail 3 180.620.3 2BVV-206 Video distributor, 6 outputs 6-wire video Top-hat rail 3 180.620.6 2BVV-223 Video distributor, 3 outputs 6-wire video for UP box - 180.622.3 2
Video switch
BVU-100 Video switch 6-wire video Top-hat rail 3 180.410.0 2
Video converter
VSU-100 Video converter 6-wire video asy. > sym. - 231.620.0 2VSU-110 Video converter 6-wire video sym. > asy. - 231.621.0 2
Call switch relay
BSR-100 Call switch relay 6-wire video BVF-230/260 - 190.190.0 2RSR-220 Call switch relay 6-wire video for BVF-200 - 190.182.0 2
Video image storage
BBS-256 Video image storage 6-wire video Top-hat rail 5 190.151.0 2
30
6DVIDEO
Video
Video
System components for multiplex couplers
BVF-260
i2-BUSPower supply
BVM-280
max. 32intercoms for each
secondary line
i2 b
us f
unct
ion
sche
mat
ic
for
the
mul
tipl
ex c
oupl
er - Modular i2 bus coupler concept- System extension as needed, simple to scale- Max. 16 primary lines = max. 160 main doors- Max. 64 secondary lines = max. 240 intercoms- 4 separate video links for 4 simultaneous connections
in the overall system- Flexible object management, for example by defining
floor doors as main doors- Optional integration of a video concierge system
Functions:
Starting coupler for the primary line
NGV-850Power supply
NGV-850Power supply
BKM-142Coupler
BSV-200Bus line power supply
NGV-850Power supply
BSV-200Bus line power supply
BVV-203/6
BKM-141Coupler
BKM-142Coupler
BKM-142Coupler
BKM-145 Coupler
BKM-144Coupler
BKM-144Coupler
BSV-200Bus line power supply
Concierge software
BSV-200Bus line power supply
BKM-143Concierge coupler
Terminating coupler for the secondary
lineCascade coupler
for the primary line
Cascade coupler for the secondary line
Concierge coupler for the concierge
connection
External camera
NGV-850Power supply
BVC-280 CCS-200
ENTRANCE 1 ENTRANCE 2 through 160
NGV-850Power supply
BTE-116 TOE-17/17E
CCVCamera
NTR-812Transformer
BSV-200Bus line power supply
BVU-100Switch
NGV-850Power supply
NGV-850Power supply
NGV-850Power supply
BSV-200Bus line power supply
BSV-200Bus line power supply
BSV-200Bus line power supply
This is a schematic functional view. All i2 bus audio and 6-wire video components can be integrated.Please consult our i2 bus system manual for planning and installation.
Our support team would be happy to assist you in your planning.
ATTENTION
Max. 10 door stations per primary line
The integration of floor door stations into the main line
is recommended for maximum flexibility in building management.
i2-BUSPower supply
BVF-200 BVF-200
ELA-100Door
electronics
+ components and wiring; see
entrance 1
31
i2-B
US
Syst
em
BKM-141, i2 bus coupler-multiplex primary lineFirst main line coupler in the modular BKM-14x coupler family to start the primary line cascade. Provides power for downstream BKM-142. Can be cascaded with up to 15 additional BKM-142 primary line couplers.
4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.
Support: up to 10 door stationsPower supply: 15VDCDim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE
BKM-144, i2 bus coupler-multiplex secondary lineAuxiliary line coupler in the modular BKM-14x coupler family to connect each additional secondary line. Up to a total of 63 BKM-144 secondary line couplers are supported in one system.
4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.
Support: Up to 4 (video) intercoms.Power supply: through BKM-145Dim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE
BKM-145, i2 bus coupler-multiplex secondary lineLast auxiliary line coupler in the modular BKM-14x cou-pler family to terminate the secondary line cascade.Provides power for upstream BKM-144.
4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.
Support: Up to 4 (video) intercoms.Power supply: 15VDCDim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE
BKM-142, i2 bus coupler-multiplex primary lineMain line coupler in the modular BKM-14x coupler family to extend the primary line cascade. Up to a total of 15 BKM-142 primary line couplers are supported in one system.
4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.
Support: up to 10 door stationsPower supply: through BKM-141Dim. (W x H x D): 56 x 96 x 50 mmSpace requirements: 3 TE
BKM-143, i2 bus coupler-multiplex conciergeVideo concierge coupler in the modular BKM-14x coupler family to connect a secondary concierge line. Enables the connection of a BVC-280 video concierge (page 33) for the entire system. The BKM-143 is inte-grated between the BKM-142 primary line and BKM-144 secondary line coupler.
4 internal voice links, i2 bus input/output, i2 bus video input, power supply to line through separate line supply.
Support: 1 BVC-280 video conciergePower supply: through the BKM-141/145Dim. (W x H x D): 102 x 96 x 50 mmSpace requirements: 6 TE
BKM-003/012/024/048i2 bus coupler-multi-plex, connector cableConnector cable to cas-cade the BKM-14X coupler family when installing on multiple top-hat rail rows. 25-pin flat cable with D-SUB plugs.
BKM-003 Length: 14 cmBKM-012 Length: 50 cmBKM-024 Length: 75 cmBKM-048 Length: 125 cm
System components for multiplex couplers
Overview
AttentionAdditional i2 bus 6-wire video components are needed for the audio/video functions.
See page 26 - 29.
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version
Designation System Variant TE Item no. DG
Coupler-multiplex, primary line
BKM-141 Coupler-multiplex, HS-Start 6-wire video Top-hat rail 3 190.124.1 2BKM-142 Coupler-multiplex, HS-Cascade 6-wire video Top-hat rail 3 190.124.2 2
Coupler-multiplex, secondary line
BKM-144 Coupler-multiplex, NS-Cascade 6-wire video Top-hat rail 3 190.124.4 2BKM-145 Coupler-multiplex, NS-End 6-wire video Top-hat rail 3 190.124.5 2
Coupler-multiplex, concierge
BKM-143 Coupler-multiplex, concierge 6-wire video Top-hat rail 6 190.124.3 2
Coupler-multiplex, connector cable
BKM-003 Coupler-connector cable 6-wire video approx. 14 cm for 3 190.124.8 2BKM-012 Coupler-connector cable 6-wire video approx. 50 cm for 12 190.124.9 2BKM-024 Coupler-connector cable 6-wire video approx. 75 cm for 24 190.125.0 2BKM-048 Coupler-connector cable 6-wire video approx. 125 cm for 48 190.125.1 2
32
6DVIDEO
Video image storage
Video image storage
The central i2 bus image storage is designed for installation in the junc-
tion box, offering the user a very convenient option for logging door
calls answered.
Every BBS-256 image storage unit has a capacity of 1024 individual
frames, and can be used by up to 256 units. The storage capacity of the
image storage unit is distributed over all calls made, and the oldest im-
age in the BBS-256 is overwritten. A radio clock is integrated into the
image storage unit in order to determine the exact time of recording.
The external active antenna is used to receive a DCF-77 time signal. The
time of recording is displayed in the video image during playback. Any
i2 bus 6-wire video intercom can be used to query the image storage
unit. The video intercom requires no additional components for this
purpose, making the upgrade of existing systems problem-free.
An image is always saved for each call made. If the call is not answered,
the recording is signalled by a blinking LED on the intercom. Images can
be retrieved and deleted by the lighting button on the intercom, and
only the images from the video phone called are accessible. The images
are stored on an SD memory card in the BBS-256. These can be re-
moved by technicians for backup. The BBS-256 is configured using a
display menu on the front.
BBS-256
i2-BUSVideo
Schematic: Representation simplified for clarity.
BBS-256
BBS-256i2 bus colour video image storage- For 6-wire video system- For up to 256 units- For installation in the junction box- Including active antenna
- Power supply: 15VDC / 230mA- Storage capacity: 1024 frames- Image resolution: 640 x 480 pixels, 24-bit colour- Space requirements: 6 units (TE), top-hat rail mounting- Dimensions (W/H/D): 93 x 96 x 59 mm
BBS-256Video image
storage
Junction box
Designation Item no. DG
BBS-256 for 6-wire video
BBS-256 Video image storage incl. Antenna 190.151.0 2
33
6DVIDEO
i2-B
US
Syst
em
Central switchboard
The BVC-280 video concierge intercom, together with the "ELCOM
Concierge" PC software, is a convenient modern solution for central
switchboard functions like concierges or doormen.
Among its notable features are internal calls to and from any intercom,
acceptance and forwarding of door calls and manual activation of all
door stations.
The software included in the package permits uncomplicated and clear
operation of the system, as well as the use of a database including
speed dial and logging functions. The concierge software automati-
cally appears as a pop-up window when a call arrives, and provides
date and time of unanswered calls in a caller list.
The BVC-280 video concierge station is shipped from the factory on a
stainless steel table console, and can be combined with any i2 bus
video or audio intercoms manufactured in or after September 2007.
The PC is connected through an RS-232 interface, while the i2 bus is
connected on an RJ-45 connector cable.
Video concierge station
BVC-280
i2-BUS
Schematic: Representation simplified for clarity.
Concierge software
RS232 interface
BVC-280 Concierge
PC
Device features Software features
Device features:- 4" (10 cm) colour TFT display. - 8 illuminated function keys, of which 4 can be pro-
grammed with special functions- Special functions: Manual camera activation and switch-
ing, intercom calls, parallel calls, access gates, switching function
- 12 harmonious ring tones, 6 of which are gong sounds. - Free assignment of ring tones to door, floor or intercom calls- Electronic adjustment of brightness, contrast, colour and
call volume- Call hold with control display- Automatic video activation upon call- Address configuration using rotary switch- High-quality table console with a stainless steel/glass
design- 2.8 m connector cable with RJ-45 plug,
3 m RS-232 connector cable- Housing of ABS plastic, in white
Software features:- Building station database with name assignment, speed
dial and memo field- Door station database with name assignment- Call list with callback function for unanswered calls- Can be connected manually to a door station- Intercom calls to the building stations- Door call forwarding to building stations- Door call ring in parallel with the building station can
be individually configured- Programming language: German/English- System requirements: Min. CPU 1GHz, RAM 256MB,
RS232, Win XP SP2, .NET 2.0
Video camera connectionBy connecting external CCS cameras, the concierge can appear on the screen for residents. In multiplex-coupler systems, the camera is connected through the BKM-143. In standard systems, the use of a BVU video converter is required. (Camera on page 22)
Concierge camera optional
Designation Item no. DG
BVC-280 for 6-wire video
BVC-280 Video concierge station 182.280.5 2
34
i2
Telephone system connection
The BTI permits the i2 bus intercom system to be connected to a tele-
phone system.
Use of the existing telephone system (pbx) means that no additional
installation of separate lines is needed for a door intercom system.
Moreover, the performance features of the telephone system, like con-
ference calls, call forwarding and call transfers can also be used for
door calls.
The BTI-256 can be connected to a telephone system by your choice of
analogue a/b, FTZ123D12 or 2-wire TFE interfaces (telecommunica-
tions systems). The analogue a/b interface supports up to 256 different
call targets. Programming and operation of the interface are provided
by DTMF dialling. This allows DTMF-capable telephones to call i2 bus
intercoms directly as well. Similarly, i2 bus intercoms, if appropriately
configured, can also call units in the telephone system through the in-
terface.
The FTZ123D12 and the 2-wire TFE interface can also be used to call up
to four different numbers each. Control of the system is carried out in
accordance with the specifications of the telephone system manufac-
turer.
BTI-256
Telecommunications interface
i2-BUS
Telephone systemBTI-256
InterfaceExternalAnalogue outFTZ123D122-wire TFE
Schematic: Representation simplified for clarity.
BTI-256
BTI-256i2 bus telecommunications interfaceHousing: 185 x 215 x 42 mm, wall mountedPower supply: 230 V / 50 Hz AC adaptor included
Option 1: Analogue a/bZ=600 Ohm, 0dBm, DTMF / pulse dialing, up to 256 call targets. Option 2: FTZ123D12 Z=600 Ohm, 0dBm, direct-current-free voice path, up to 4 call targets.Option 3: 2-wire TFEZ=600 Ohm, 0dBm, current sink 30mA / 70mA, DTMF / pulse dialing, up to 4 call targets.
Designation Item no. DG
BTI-256
BTI-256 Telecommunications interface 190.140.0 2
35
6DVIDEO
i2-B
US
Syst
em
Intranet technology
i2 bus video transmission over the existing computer network.
The BPI-200 i2 bus interface and the BVS-200 video server allow the
connection of up to 6 PC workstations to the ELCOM i2 bus video
phone system.
The BPI-200 interface converts i2 bus signals into standard data, video
and audio signals. The standard signals are processed by the video
server and transmitted over the network. The software "BVS Viewer"
is installed on the PC workstation for communication with the video
server.
After configuration, the PC workstation fulfils the function of a video
telephone. After a ring, the PC software handles the automatic display
of the video image, also offering the option of switching between dif-
ferent cameras, storing the current video frame, actuating the door
opener or turning on the light. Voice can also be transmitted through
a PC headset.
The system's flexibility makes it possible to combine different func-
tions. For example, the integration of the telecommunications interface
permits the telephone system to both carry out voice transmission and
the door opening function. Similarly, conventional intercoms in other
parts of the building or video intercoms can also be used for conven-
tional door communication.
Video communication on the Intranet
BVS-200, BPI-200
BVS-200 BPI-200
BVS-200Video server Video server with RISC processor, 1 channel video trans-mission, bidirectional audio transmission, BNC video loop-through input, audio input and output jacks, RS-232 interface.Digital inputs and outputs, network connection (10/100 Mbit), integrated Web server, high-quality video resolution of up to 768x576 at 25 frames/second. Video quality, video resolution and network bandwidth configurable. Power supply using attached wall power supply.
Dimensions (W x H x D): 140 x 140 x 40 mm
BPI-200Video server interface i2 bus interface for the connection of the bus video server (BVS-200). Up to 6 call targets addressable, 4 signal outputs for call signalling, video output using cinch jack, audio output jack, audio input jack. RS-232 interface galvanically isolated, status display with LEDs. Delivery contents: "BVS Viewer" software and Data, video and audio cables. Housing for wall mounting.
Dimensions (W x H x D): 185 x 215 x 42 mm
Schematic: Representation simplified for clarity.
For cameras, see pages 22/23
i2-BUS
BPI-200Interface
NetworkTCP/IP Intranet
BVS-200Video serverEthernet Audio,
data, video
PC PC
Distribution board
Door opener
Door opener
Designation Item no. DG
BVS-200 and BPI-200
BVS-200 Video server 190.312.0 2BPI-200 Video server interface (6-wire video) 190.304.0 2
36
6DVIDEO
Video TV integration
Utilise existing technical facilities and increase the convenience of sin-
gle- and multi-family residences. A simple, cost-effective connection
between the i2 bus and cable TV/antenna installations permits you to
view your video image on any connected television.
Another convenient feature is the capability to connect to the telecom-
munications system with our BTI-256 telecommunications interface
(page 34).
An economical investment in quality improvement and safety optimisa-
tion.
Now on TV!
TV video technology
i2-BUS
*For cameras, see pages 22/23
VSU
NVG-850
AVM
Antenna/Cable TV terminal
External camera*
TV
AVM-200 VSU-110 NGV-850
VSU-110Video converter Converts the symmetrical i2 bus video signal into a standard 75 ohm video signal for connection to monitoring screens, long-term recorders, AV modulators, video cards and so on.
NGV-850Video power unitCentral power supply for video i2-BUS-System.
AVM-200 Audio/video modulatorModulates a (mono) audio/video signal into an HF signal. LED channel display, channel switched using simple three-key controller.
Channels: VHF 5-12 / S11-41 / UHF 21-69Frequency range: 175-862MHz(Please be mindful of freely accessible channels in cable televsion networks)
Includes two-way distributor for signal feedDimensions (W x H x D): 105 x 91 x 36 mm
Schematic: Representation simplified for clarity.
Designation Item no. DG
AVM, VSU and NGV
AVM-200 Audio/video modulator 231.705.0 2VSU-110 Video converter for 6-wire video 231.621.0 2NGV-850 Video power unit 231.410.5 2
37
PC
i2
i2-B
US
Syst
em
Economical calling via graphical display
The display call system supports the quick, space-saving access admin-
istration of up to 256 residential units.
A display call system consists of the DCM-256 display call module, and
can optionally be extended with a DLM-256 12-call button module or
a DCI-256 LAN interface.
The name, additional information, appartement number and system
address of each resident is stored. Any resident can be selected by
searching the alphabetically sorted name list. If a DCM-keypad is con-
nected, the resident can be called directly by entering the phone
number.
In combination with the keyboard module, moreover, a code lock func-
tion is possible with 2 independent switch contacts. The DCM-256 is
configured using the RS-232 interface and the DCTERM PC software
provided.
Alternatively, the DCI-256 LAN interface can be connected so that a
connection can be established through a TCP/IP network (Internet).
This permits the remote maintenance of resident data through a LAN
network or, with appropriate routers, from the Internet. If a DLM-256
keyboard module is connected, resident data – protected by a numeric
code – can also be maintained directly on site.
Modular display call system
Digital calling
DCM-256 DLM-256 DCI-256
DCM-256MODESTA display call moduleIlluminated graphical LC display with large text. 256 resident entries. Alphabetically sorted name list. Dynamic search speed if keys are held down. Animated operat-ing manual. Direct call button with additional keyboard expander (BTE-116) possible. RS-232 interface for data exchange, including SUB-D 9-pin data cable. PC software for convenient editing of resident data.Power supply: 12V AC (15V DC) /350mA Temperature range: -20°C to + 70°C Dimensions (W x H x D): 120 x 120 x 39 mm
DLM-256MODESTA stainless steel keypad module Stainless-steel 12-key call button, flush mounting.Direct calling via telephone number entry. Code lock functions.
Temperature range: -20°C to +70°C Dimensions (W x H x D): 120 x 120 x 26 mm
DCI-256 LAN interfaceLAN interface for the DCM-256 display call module. RJ-45 Ethernet network connector. Web or telnet configuration.
Temperature range: -20°C to +70°C Dimensions (W x H x D): 70 x 24 x 38 mm
Perfectly suited for integration into our
MODESTA line (pages 66 - 77).
Schematic: Representation simplified for clarity.
DCM-256
Direct call button
BTE-116Optional
DLM-256Optional
i2-BUS
DCI-256Optional
RS232
Configured using PC
TCP/IPNetwork
Designation Variant Item no. DG
DCM, DLM and DCI
DCM-256 Display call module Stainl. st., matte 581.256.0 2DLM-256 Keypad module Stainl. st., matte 581.257.0 2DCI-256 LAN interface 150.715.0 2
38
39
1+n
1+n
Sys
tem
1+n
Sys
tem
Communications systemsOver the last two decades, the 1+n technology has become a proven standard technology for residential construction. As a particularly cost-effective and user-friendly system, the use of 1+n technology in audio communications facilities guarantees a high degree of security and func-tionality.
40
The 1+n audio intercom is a discrete, elegant solution for securing the
living area and access control. The HAT-402's notable features in-
clude outstanding speech transmission and user-friendly operating
convenience.
HAT-402
Intercom
HAT-402 TKA-UNI
HAT-402Intercom- 3-level call volume con-
trol with call terminator- LED status display for calls- Potential-free call button - Convenient magnetic
holder for handset
Colour: whiteDimensions (W x H x D): 100 x 192 x 50 mm
TKA-UNITabletop audio console(Shown with HAT-402)
For use in the office. 3 m connector cable with RJ-45 plug included.
NSG-802Secondary signal deviceMulti-tone calls. Wall-mounted, flat design, plastic housing, available in white.Dimensions (W x H x D): 129 x 129 x 33 mm
NSG-802
Designation System Colour Item no. DG
Intercom
HAT-402 Intercom 1+n white 130.810.0 2
Accessories
TKA-UNI Table console - - 130.120.0 2NSG-802 Sec. signal device 1+n white 130.901.0 2
41
1+n
Sys
tem
USG-200AVoice switching unit Voice route switching unit for 2 door stations. Can be extended to another 2 door stations with another USG-200B Voice switch-ing unit. Cascading to up to 10 doors. Top-hat rail mounting.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
RSR-402Call switch relay for HAT-402.
ERG-402Tone generator forstorey callGenerates a ringing sound to differentiate between calls from the door to the floor or to the apartment.4 call tones configurable with DIP switch.Top-hat rail mounting.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
RMS-4HS, RMS-6HS and RMS-10HS Privacy feature/abuse block for 4, 6 or 10 units (modu-lar extensibility). Enables the voice connection only to the last intercom called; the others remain blocked against eavesdroppers. Top-hat rail mounting.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
ELA-402Door electronics For installation in letter box systems and ESTA/STABILA door stations. Volume con-trol for microphone and speaker. Integrated alpha tone generator for electronic calling.
Dim.: 52x93x68mm (W/H/D)Space requirements: 3 TE
Overview
System components
NTR-812Power transformerSafety transformer with PTC fuse. Top-hat rail mounting.
Input: 230 VACOutput: 12 VAC / 1.5 ADim.: 35x90x60mm (W/H/D)Space requirements: 2 TE
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm), HS version = Top-hat rail version, UP version = Flush mounted version
Designation System Variant TE* Item no. DG
Door electronics
ELA-402 Door electronics 1+n - - 120.431.0 2
Privacy feature
RMS-4HS Privacy feature, 4 units 1+n Top-hat rail 3 140.020.4 2RMS-6HS Privacy feature, 6 units 1+n Top-hat rail 3 140.020.6 2RMS-10HS Privacy feature, 10 units 1+n Top-hat rail 3 140.021.0 2
Floor call generator
ERG-402 Tone generator (storey call) 1+n Top-hat rail 3 120.102.4 2
Power supply
NTR-812 Power transformer - Top-hat rail 2 120.100.4 2
Switching units
USG-200A Voice switching unit, 2 doors 1+n Top-hat rail 3 140.006.0 2USG-200B Voice switch. unit, add. doors 1+n Top-hat rail 3 140.006.1 2
Call switch relay
RSR-402 Call switch relay 1+n for HAT-402 - 140.004.0 2
4242
Photo: SchwörerHaus
4343
Sets
an
d K
its
As one of the leading manufacturers of door inter-com systems, we offer an excellent selection of com-plete sets with door stations or system kits for the upgrade of existing systems to 1+n and i2 bus tech-nology.
They can be configured quickly and inexpensively, and are suitable for both new construction and ren-ovations.
Complete systems
44
i2 bus ESTA video sets with BVF-200
VFP-ESTA stainless steel PVD brass, polished
Stainless steel front plate, 2 mm thick, polished and processed with
weather-resistant, wear-resistant and scratch-resistant PVD brass coat-
ing, name plates LED-illuminated and replaceable from the front.
VFP Flush-mounted door station for 1, 2 or 3 unitsFront (W x H): 140 x 260 mm UPK (W x H): 120 x 240 x 55 mm
The complete set (6-wire video) includes:- TMG-Set Flush-mounted door station- BVF-200 Video hands-free intercom (1 – 3, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
The complete ESTA video package is sophisticated basic equipment for
conveniently securing single- and multi-family residential buildings.
The attractive ESTA stainless steel door station is optionally available in
matte brushed or highly wear-resistant brass-coloured PVD coating.
The "stainless steel matte" design is now available with the newly de-
veloped ZENTRA call buttons. Depending on the layout of the entry
area, these variants represent an attractive, long-lived form of door
communications.
With its dynamic design, excellent image quality and convenient hands-
free function, the BVF-200 provides all the features you need for secure
video communication.
The colour camera module ensures an optimum view even under dif-
ficult conditions. The mechanically adjustable pivoting range of nearly
180° provides a view in any direction. Automatic B/W mode and infra-
red lighting adapt the view to any lighting conditions.
Technical data for the BVF-200 video hands-free intercom can be
found on page 18.
Hands-free talking, colour viewing!
Designation Variant Item no. DG
For 1 unit
VFP-1MS Video set, colour up PVD brass 109.171.6 2
For 2 units
VFP-2MS Video set, colour up PVD brass 109.172.6 2
For 3 units
VFP-3MS Video set, colour up PVD brass 109.173.6 2
45
Sets
an
d K
its
VFZFlush-mounted door station for 1, 2 or 3 unitsFront (W x H): 140 x 260 mm UPK (W x H): 120 x 240 x 55 mm
The complete set (6-wire video) includes:- TVM-Set Flush-mounted door station- BVF-200 Video hands-free intercom (1 – 3, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
Stainless steel front plate, 2 mm, matte brushed, special security screws, flush mounted box 55 mm in depth, with new ZENTRA
call button (microswitch integrated white LED illumination, stainless steel push button, name plates replaceable from the front).
VFZ-ESTA stainless steel, matte brushed
i2 bus ESTA video sets with BVF-200
Designation Variant Item no. DG
For 1 unit
VFZ-1EM Video set, colour up Stainless steel 108.161.8 2
For 2 units
VFZ-2EM Video set, colour up Stainless steel 108.162.8 2
For 3 units
VFZ-3EM Video set, colour up Stainless steel 108.163.8 2
46
i2 bus ESTA video sets with BVM-280
VBP Flush-mounted door station for 1, 2 or 3 unitsFront (W x H): 140 x 260 mm UPK (W x H): 120 x 240 x 55 mm
The complete set (6-wire video) includes:- TMG-Set Flush-mounted door station- BVM-280 Video intercom (1 – 3, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
VBP-ESTA stainless steel PVD brass, polished
Stainless steel front plate, 2 mm thick, polished and processed with
weather-resistant, wear-resistant and scratch-resistant PVD brass coat-
ing, name plates LED-illuminated and replaceable from the front.
The complete ESTA video package is sophisticated basic equipment for
conveniently securing single- and multi-family residential buildings.
The attractive ESTA stainless steel door station is optionally available in
matte brushed or highly wear-resistant brass-coloured PVD coating.
The "stainless steel matte" design is now available with the newly de-
veloped ZENTRA call buttons. Depending on the layout of the entry
area, these variants represent an attractive, long-lived form of door
communications.
In addition to the attractive design, the generously dimensioned TFT
colour display, excellent image quality and a variety of convenience
functions of the BVM-280 video intercom are popular features.
The colour camera module ensures an optimum view even under dif-
ficult conditions. The mechanically adjustable pivoting range of nearly
180° provides a view in any direction. Automatic B/W mode and infra-
red lighting adapt the view to any lighting conditions.
Technical data for the BVM-280 video intercom can be found
on page 19.
Convenience functions with 4" display
Designation Variant Item no. DG
For 1 unit
VBP-1MS Video set, colour up PVD brass 107.171.6 2
For 2 units
VBP-2MS Video set, colour up PVD brass 107.172.6 2
For 3 units
VBP-3MS Video set, colour up PVD brass 107.173.6 2
47
Sets
an
d K
its
VBZFlush-mounted door station for 1, 2 or 3 unitsFront (W x H): 140 x 260 mm UPK (W x H): 120 x 240 x 55 mm
The complete set (6-wire video) includes:- TVM-Set Flush-mounted door station- BVM-280 Video intercom (1 – 3, depending on the set)- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
Stainless steel front plate, 2 mm, matte brushed, special security screws, flush mounted box 55 mm in depth, with new ZENTRA
call button (microswitch integrated white LED illumination, stainless steel push button, name plates replaceable from the front).
VBZ-ESTA stainless steel, matte brushed
i2 bus ESTA video sets with BVM-280
Photo: SchwörerHaus
Designation Variant Item no. DG
For 1 unit
VBZ-1EM Video set, colour up Stainless steel 106.161.8 2
For 2 units
VBZ-2EM Video set, colour up Stainless steel 106.162.8 2
For 3 units
VBZ-3EM Video set, colour up Stainless steel 106.163.8 2
48
Entfernung
Bild
auss
chni
tt ho
rizon
tal
Kamera 77°Öffnungsw
inkel
77°
1m
1m
12°
12°
i2 bus KOMPAKT video sets
BTV-230 Compact colour video door station, wall-mounted
- Wall-mounted door station- For up to 3 units- High-resolution colour camera- LED-illuminated buttons- Name plates replaceable from the front- Colour: Silver and white- Dimensions (W x H x D): 102 x 206 x 32 mm
Technical data for the video camera:Mechanically adjustable: +/-12° horizontalOpening angle: 77° horizontal, 55° verticalResolution: 320.000 Pixels
BTV-230 - KOMPAKT video door station, wall-mounted
Dynamic design, mature and uncomplicated i2 bus video technology
and a great variety of functions are the outstanding features of the
new KOMPAKT video sets. ELCOM thus offers a simple, cost-effective
option for the video monitoring of residential buildings for 1 to 3 fami-
lies.
These sets are delivered complete with the attractive KOMPAKT door
station, all electronic components needed and the appropriate number
of video intercom units.
The wall-mounted door station in silver or white provides 3 LED-illumi-
nated call buttons with name plate replacement from the front. The
high-resolution camera and all door electronic components are inte-
grated into the compact 32 mm flat housing. One of the call buttons
can optionally be configured as a light button in combination with a
BLA-100 lighting timer. For interior video sets, the BVF-200 hands-free
video intercom or the BVM-280 video intercom are available.
Technical data on the video intercoms can be found on pages 18 - 19.
Compact with perfect functionality
Camera
Distance
Horiz
onta
l im
age
sect
ion
Opening angle
If needed, the third button can be configured as a light button. A BSR-120 switch relay or BLA-100 lighting timer is needed in this case, see page 27.Please note the installation instructions for cameras on catalogue page 22.
Designation Variant Item no. DG
BTV for 6-wire video
BTA-230 Compact video door station silver 280.001.0 2BTA-230 Compact video door station white 280.004.0 2
49
Sets
an
d K
its
VTFVideo set, colour, hands-free
The complete set (6-wire video) includes:
- BTV-230 Wall-mounted door station, integrated camera and door electronics- BVF-200 Video hands-free intercom (1 – 3, depending on the set)- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
VTBVideo set, colour
The complete set (6-wire video) includes:
- BTV-230 Wall-mounted door station, integrated camera and door electronics- BVM-280 Video intercom (1 – 3, depending on the set)- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
VTB - KOMPAKT video set
VTF - KOMPAKT video set, hands-free
i2 bus KOMPAKT video sets
Designation Variant Item no. DG
For 1 unit
VTF-1 SI Video set silver 105.181.1 2VTF-1 WS Video set white 105.181.4 2
For 2 units
VTF-2 SI Video set silver 105.182.1 2VTF-2 WS Video set white 105.182.4 2
For 3 units
VTF-3 SI Video set silver 105.183.1 2VTF-3 WS Video set white 105.183.4 2
Designation Variant Item no. DG
For 1 unit
VTB-1 SI Video set silver 104.191.1 2VTB-1 WS Video set white 104.191.4 2
For 2 units
VTB-2 SI Video set silver 104.192.1 2VTB-2 WS Video set white 104.192.4 2
For 3 units
VTB-3 SI Video set silver 104.193.1 2VTB-3 WS Video set white 104.193.4 2
50
i2 bus KOMPAKT audio sets
Dynamic design, mature and uncomplicated i2 bus technology and a
great variety of functions are the outstanding features of the new
KOMPAKT audio sets.
These sets are delivered complete with the attractive KOMPAKT door
station, all electronic components needed and the appropriate number
of intercom units.
The wall-mounted door station in silver or white provides 3 LED-illumi-
nated call buttons with name plate replacement from the front. All
door electronic components are integrated into the compact 32 mm
flat housing. One of the call buttons can optionally be configured as a
light button in combination with a BLA-100 lighting timer. For interior
sets, the BFT-200 hands-free intercom or the BHT-200 intercom are
available.
Technical data on the intercoms can be found
on pages 20 - 21.
BTA-230 - KOMPAKT audio door station, wall-mounted
BTA-230KOMPAKT audio door station, wall-mounted
- Wall-mounted door station- For up to 3 units- LED-illuminated buttons- Name plates replaceable from the front- Colours: Silver and white- Dimensions (W x H x D):102 x 206 x 32 mm
Compact with attractive design
If needed, the third button can be configured as a light button. A BSR-120 switch relay or BLA-100 lighting timer is needed in this case, see page 27.
Designation Variant Item no. DG
BTA
BTA-230 Compact audio door station silver 270.001.0 2BTA-230 Compact audio door station white 270.004.0 2
51
Sets
an
d K
its
ATF - KOMPAKT audio set, hands-free
ATB - KOMPAKT audio set
ATFAudio set, hands-free
The complete set includes:
- BTA-230 Wall-mounted door station, integrated door electronics- BFT-200 Hands-free intercom (1 – 3, depending on the set)- BSV-100 Line power supply- NTR-812 Power transformer
ATBAudio set
The complete set includes:
- BTA-230 Wall-mounted door station, integrated door electronics- BHT-200 Hands-free intercom (1 – 3, depending on the set)- BSV-100 Line power supply- NTR-812 Power transformer
i2 bus KOMPAKT audio sets
Designation Variant Item no. DG
For 1 unit
ATB-1 SI Audio set silver 102.191.1 2ATB-1 WS Audio set white 102.191.4 2
For 2 units
ATB-2 SI Audio set silver 102.192.1 2ATB-2 WS Audio set white 102.192.4 2
For 3 units
ATB-3 SI Audio set silver 102.193.1 2ATB-3 WS Audio set white 102.193.4 2
Designation Variant Item no. DG
For 1 unit
ATF-1 SI Audio set silver 103.181.1 2ATF-1 WS Audio set white 103.181.4 2
For 2 units
ATF-2 SI Audio set silver 103.182.1 2ATF-2 WS Audio set white 103.182.4 2
For 3 units
ATF-3 SI Audio set silver 103.183.1 2ATF-3 WS Audio set white 103.183.4 2
52
The complete STABILA package is the ideal basic equipment for the
security of single- and multi-family residential buildings. With its resil-
ient 1+n technology, naturally including a privacy feature (for buildings
with two or more families), it allows the use of the existing bell wiring,
ensuring simple, cost-effective installation.
The robust STABILA aluminium door station is optionally available for
flush or wall mounting and is now equipped with the newly developed
ZENTRA call button. A durable and nearly indestructible combination.
The HAT-402 intercom has a call controller/terminator, LED functional
display for talking and door opening, door opener button and a poten-
tial-free button for a custom purpose.
Technical data for the intercom can be found on page 40.
1+n STABILA audio sets
ASU - STABILA flush-mounted door station
Aluminium front plate, 3 mm, special security screws, flush mounted box 55 mm in
depth, with new ZENTRA call button (microswitch integrated white LED illumination,
stainless steel push button, name plates replaceable from the front).
ASU Flush-mounted door station for 1, 2 or 3 unitsFront: 140 x 260 mm UPK: 120 x 240 x 55 mm
The complete set includes:- TUP-Set Flush-mounted door station- HAT-402 Intercom (1 – 3, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)
EV1 – Anodised aluminium RAL 9016 Traffic white
Robust and economical
Designation Variant Item no. DG
For 1 unit
ASU-1EL 1+n Audio set EV1 100.051.1 2ASU-1WS 1+n Audio set RAL 9016 100.051.4 2
For 2 units
ASU-2EL 1+n Audio set EV1 100.052.1 2ASU-2WS 1+n Audio set RAL 9016 100.052.4 2
For 3 units
ASU-3EL 1+n Audio set EV1 100.053.1 2ASU-3WS 1+n Audio set RAL 9016 100.053.4 2
53
Sets
an
d K
its
1+n STABILA audio sets
Aluminium front plate, 3 mm, special security screws, frame system 42 mm in depth,
with new ZENTRA call button (microswitch integrated white LED illumination, stainless
steel push button, name plates replaceable from the front).
ASP Wall-mounted door station for 1, 2 or 3 unitsDimensions: 136 x 256 x 42 mm
The complete set includes:- TAP-Set Wall-mounted door station- HAT-402 Intercom (1 – 3, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)
ASP - STABILA wall-mounted door station
EV1 – Anodised aluminium RAL 9016 Traffic white
Photo: SchwörerHaus
Designation Variant Item no. DG
For 1 unit
ASP-1EL 1+n Audio set EV1 100.071.1 2ASP-1WS 1+n Audio set RAL 9016 100.071.4 2
For 2 units
ASP-2EL 1+n Audio set EV1 100.072.1 2ASP-2WS 1+n Audio set RAL 9016 100.072.4 2
For 3 units
ASP-3EL 1+n Audio set EV1 100.073.1 2ASP-3WS 1+n Audio set RAL 9016 100.073.4 2
54
The complete ESTA package is a demanding basic set of equipment for
the security of single- and multi-family residential buildings. With its
resilient 1+n technology, naturally including a privacy feature (for build-
ings with two or more families), it allows the use of the existing bell
wiring, ensuring simple, cost-effective installation.
The attractive ESTA stainless steel door station is optionally available in
matte brushed or highly wear-resistant brass-coloured PVD coating.
The "stainless steel matte" design is now available with the newly de-
veloped ZENTRA call buttons. Depending on the layout of the entry
area, these variants represent an attractive, long-lived form of door
communications.
The HAT-402 intercom has a call controller/terminator, LED functional
display for talking and door opening, door opener button and a poten-
tial-free button for a custom purpose.
Technical data for the intercom can be found on page 40.
1+n ESTA audio sets
ASA - ESTA stainless steel PVD brass, polished
ASA Flush-mounted door station for 1, 2 or 3 unitsFront: 140 x 260 mm UPK: 120 x 240 x 55 mm
The complete set includes:- TMG-Set Flush-mounted door station- HAT-402 Intercom (1 – 3, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)
Stainless steel front plate, 2 mm thick, polished and processed with
weather-resistant, wear-resistant and scratch-resistant PVD brass coat-
ing, name plates LED-illuminated and replaceable from the front.
Attractive and durable
Designation Variant Item no. DG
For 1 unit
ASA-1MS 1+n audio sets UP PVD brass 100.091.6 2
For 2 units
ASA-2MS 1+n audio sets UP PVD brass 100.092.6 2
For 3 units
ASA-3MS 1+n audio sets UP PVD brass 100.093.6 2
55
Sets
an
d K
its
1+n ESTA audio sets
Stainless steel front plate, 2 mm, matte brushed, special security screws, flush mounted box
55 mm in depth, with new ZENTRA call button (micro-switch integrated white LED illumina-
tion, stainless steel push button, nameplates replaceable from the front).
ASZ-ESTA stainless steel, matte brushed
ASZFlush-mounted door station for 1, 2 or 3 unitsFront: 140 x 260 mm UPK: 120 x 240 x 55 mm
The complete set includes:- TVM-Set Flush-mounted door station- HAT-402 Intercom (1 – 3, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)
Designation Variant Item no. DG
For 1 unit
ASZ-1EM 1+n audio sets UP Stainless steel 100.071.8 2
For 2 units
ASZ-2EM 1+n audio sets UP Stainless steel 100.072.8 2
For 3 units
ASZ-3EM 1+n audio sets UP Stainless steel 100.073.8 2
56
1+n audio kits
By using the existing bell wiring, the 1+n audio kits can be installed
easily and inexpensively and are particularly problem-free in combina-
tion with all ELCOM letter box systems and door stations.
This makes 1+n audio kits ideal for the renovation
of existing 1 – 3 family houses.
AEKAudio kit, 1+n
available for 1 – 3 units.
Complete kit includes (without door station):- HAT-402 Intercom (1 – 3, depending on the set)- ELA-402 Door electronics- NTR Power transformer- RMS Privacy feature (for 2 or more units)
AEK - audio kit 1+n
1+n kits: Ideal for cost-effective renovation. i2 bus kits: Ideal for quick, modern installation.
With our audio kits, we offer the ability to configure entire residential systems quickly and effectively.
Available in 1+n variant:
- AEK (with HAT-402 intercom, see page 40)
Available in the i2 bus variants:
- AKG (without intercoms, intercoms selectable, pages 20 - 21)
- AKB (with BHT-200 intercom)
- AKF (with BFT-200 hand-free intercom)
(n = number of intercoms)
HAT-402
4+n
Distribution board
Door opener
1 1 1 1
2
4
Door opener2
BHT-200
2
2
Distribution board
Designation Variant Item no. DG
For 1 unit
AEK-1 1+n audio kit 1WE 100.014.1 2
For 2 units
AEK-2 1+n audio kit 2WE 100.014.2 2
For 3 units
AEK-3 1+n audio kit 3WE 100.014.3 2
57
Sets
an
d K
its
i2 bus audio sets
AKF - audio kit, i2 bus, hands-free
AKB - audio kit, i2 bus
AKG - basic audio kit, i2-BUS
AKFAudio kit, i2 bus
Available for 1 – 18 units.
Complete kit includes (without door station):- BFT-200 Hands-free inter-
com (number of units)- ELA-100 Door electronics- BTE-116 Call button
expander- BSV-100 Line power
supply- NTR-812 Power
transformer
AKBAudio kit, i2 bus
Available for 1 – 18 units.
Complete kit includes (without door station):- BHT-200 Intercom
(number of units)- ELA-100 Door
electronics- BTE-116 Call button
expander- BSV-100 Line power
supply- NTR-812 Power
transformer
AKGBasic audio kit, i2 bus
Electronic packages for 1 – 16 units.
Basic kit includes (without door station or intercoms):- ELA-100 Door electronics- BTE-116 Call button expander- BSV-100 Line power supply- NTR-812 Power transformer
Designation Variant Item no. DG
Serial AKB
AKB-01 i2 bus audio kit 1WE 100.190.1 2AKB-02 i2-buS audio kit 2WE 100.190.2 2AKB-03 i2 bus audio kit 3WE 100.190.3 2AKB-04 i2 bus audio kit 4WE 100.190.4 2AKB-05 i2 bus audio kit 5WE 100.190.5 2AKB-06 i2 bus audio kit 6WE 100.190.6 2AKB-07 i2 bus audio kit 7WE 100.190.7 2AKB-08 i2 bus audio kit 8WE 100.190.8 2AKB-09 i2 bus audio kit 9WE 100.190.9 2AKB-10 i2 bus audio kit 10WE 100.191.0 2AKB-11 i2 bus audio kit 11WE 100.191.1 2AKB-12 i2 bus audio kit 12WE 100.191.2 2AKB-14 i2 bus audio kit 14WE 100.191.4 2AKB-15 i2 bus audio kit 15WE 100.191.5 2AKB-16 i2 bus audio kit 16WE 100.191.6 2AKB-18 i2 bus audio kit 18WE 100.191.8 2
Designation Variant Item no. DG
Serial AKG
AKG-01/16 basic audio kit 1-16WE 100.200.0 2
Designation Variant Item no. DG
Serial AKF
AKF-01 i2 bus audio kit 1WE 100.180.1 2AKF-02 i2 bus audio kit 2WE 100.180.2 2AKF-03 i2 bus audio kit 3WE 100.180.3 2AKF-04 i2 bus audio kit 4WE 100.180.4 2AKF-05 i2 bus audio kit 5WE 100.180.5 2AKF-06 i2 bus audio kit 6WE 100.180.6 2AKF-07 i2 bus audio kit 7WE 100.180.7 2AKF-08 i2 bus audio kit 8WE 100.180.8 2AKF-09 i2 bus audio kit 9WE 100.180.9 2AKF-10 i2 bus audio kit 10WE 100.181.0 2AKF-11 i2 bus audio kit 11WE 100.181.1 2AKF-12 i2 bus audio kit 12WE 100.181.2 2AKF-14 i2 bus audio kit 14WE 100.181.4 2AKF-15 i2 bus audio kit 15WE 100.181.5 2AKF-16 i2 bus audio kit 16WE 100.181.6 2AKF-18 i2 bus audio kit 18WE 100.181.8 2
58
6DVIDEO
Video Video
i2 bus colour video kits
The modular conversion system - for more convenience and security
ELCOM video kits are an ideal starting point for simple new installation
of video systems or conversion of existing audio systems*. They are
exceedingly well suited for ESTA and STABILA door stations and letter
box systems, which we can gladly extend with a video preparation free
of charge.
The kits are available with three camera variants and include all the
electronic components you need for simple series wiring of up to 6
units. The kits can support a maximum extent of up to 16 units, but in
that case a video star wiring configuration is needed, along with addi-
tional video distributors(BVV).
All 6-wire video intercoms in the BVF-260, BVF-230, BVF-200 and
BVM-280 series are suitable. (See pages 16 - 19).
* Depending on the cabling already available
VKG-200/BTC - Basic kit, video i2 bus
VKG-200/BTC Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.
- BTC-200 Camera door electronics combination- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
Basic kit Scope of delivery:(without door station or video intercoms)
Series wiring Star wiring configuration
i2-BUSPower supply i2-BUS
Power supply
Up to 6 units Up to 16 units
BVV-203/6,223
BVF-200
BVF-260 BVM-280
BVF-200
Designation Item no. DG
6-wire video kit with BTC camera
VKG-200/BTC i2 bus basic kit, colour video 100.131.1 2
Designation Item no. DG
Optional for star wiring configuration
BVV-203 Video distributor, 3-way, top-hat rail 180.620.3 2BVV-206 Video distributor, 6-way, top-hat rail 180.620.6 2BVV-223 Video distributor, 3-way, UP box 180.622.3 2
59
ELCOM.
ELCOM.
Sets
an
d K
its
i2 bus colour video kits
VKG-200/CCV - Basic kit, video i2 bus VKG-200/CCS - Basic kit, video i2 bus
Example: Video preparation of
2-row door station for BTC-200
Example: Video preparation of
3-row door station for CCV-200
Example: Video preparation of
letter boxes for CCV-200
VKG-200/CCV Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.
- CCV-200 Built-in camera module- ELA-100 Door electronics- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
Basic kit Scope of delivery:(without door station or video intercoms)
VKG-200/CCS Basic kit 6-wire video, colour video- Up to 6 units in series.- Up to 16 units in a star wiring configuration. Please order the appropriate number of video distributors.
- CCS-200 Outdoor camera, stainless steel- ELA-100 Door electronics- BTE-116 Call button expander- BSV-200 Line power supply- NGV-850 Video power unit- NTR-812 Power transformer
Basic kit Scope of delivery:(without door station or video intercoms)
Designation Item no. DG
6-wire video kit with CCV camera
VKG-200/CCV i2 bus basic kit, colour video 100.132.1 2
Designation Item no. DG
6-wire video kit with CCS camera
VKG-200/CCS i2 bus basic kit, colour video 100.133.1 2
60
6161
Acc
ess
con
tro
l
Convenient and modern, thanks to keyless access control. For single- and multi-family houses, ELCOM provides keypass, fingerprint or code lock systems for secu-rity that protects easily and comfortably. As a standalone system, or integrated into ELCOM door stations.
Components and systems
62
RFID access control
Keypass needs no connection to a PC or control unit. RFID transpond-
ers in (credit) card format or as key chains are used as passes (keys). A
keypass reader can manage up to 200 passes. The built-in 2-digit LED
display shows the storage cell number of the pass. Passes can be read
or deleted using the master passcard included. Display of the storage
cell number makes selective deletion of individual passes possible.
In addition to the master passcard provided, another pass can be con-
figured as a second master passcard. While the original master pass-
card is assigned permanently to a single keypass reader, the second
master passcard can be assigned to different units simultaneously. This
makes it possible to manage multiple keypass readers conveniently
with a single second master passcard.
Keypass
KAEComplete unit* with AP designFront plate of 2 mm stainless steel, matte, sur-rounding aluminium frame, painted in DB703, special security screws, surround-ing gasket.
Dimensions (W x H x D): 160 x 230 x 42 mm
KPAKeypass keychainContact-free pass as a keychain.Packaging unit: 3 / 10 units
Dimensions (W x H x D): 43 x 35 x 5 mm
KPCKeypass cardContact-free pass in credit card format.Packaging unit: 3 / 10 units
Dimensions (W x H x D): 85 x 54 x 1 mm
KUEComplete unit* in UP variantFront plate of 2 mm stain-less steel, matte, special security screws, surround-ing gasket.
Dimensions of front plate (W x H): 120 x 190 mm
Including UP box, Dimensions (W x H x D): 100 x 170 x 55 mm
KPR-200keypass built-in unit* - Interchangeable
potential-free contact (24V/1A)For controlling a door opener.
- Relay delay time adjust-able (0.5 or 9 seconds)
- Storage space for up to 200 passes
- 2-digit LED display- Including viewport for
80x80 mm opening- 12-24VDC/12-15VAC
200mA power supply- Dimensions (W x H x D):
85 x 105 x 29 mm
Keypass
* NTR-812 power transformer (order no. 120.100.4) not included.
Designation Variant Item no. DG
Keypass device
KAE Wall-mounted 100.641.1 2KUE Flush-mounted 100.621.1 2KPR-200 Built-in unit 150.620.0 2
Keypass keychain
KPA-003 3 units 150.622.3 2KPA-010 10 units 150.622.1 2
Keypass card
KPC-003 3 units 150.621.3 2KPC-010 10 units 150.621.1 2
63
Fingerprint
Acc
ess
con
tro
l
Fingerprint
Fingerprint access control uses the unique features of the fingerprint
for authentication, thus providing an alternative to keys, chip cards or
access codes. As a "standalone" access controller with a storage ca-
pacity of up to 99 fingers/users, the system is suitable for single- or
multi-family buildings or for companies.
The fingerprint access control consists of an indoor unit for controlling,
recording and deleting of users and a scanner unit to read fingerprints.
The connection between scanner unit and indoor unit uses four wires.
The system has a power cord on the indoor unit for its power supply.
The indoor unit is equipped with one (3*) potential-free switching out-
put. The switching duration of contacts can be set between 1 and
99 seconds. Alternatively, a toggle mode can also be configured that
turns the contact on when first activated, then off when it is activated
again.
Biometric access control
FPE-100Built-in fingerprint unitInstallation set for existing door stations or letter box systems.
Technical dataStorage capacity: Up to 99 finger data setsSwitching outputs: 1 changer contact, max. 230V/5A
Toggle mode or adjustable dura-tion of 1 to 99 seconds.
Power supply: AC adaptor includedDim.of scanner unit: 85 x 100 x 50 mm (W x H x D)Dim. of indoor unit: 180 x 110 x 41 mm (W x H x D)
* Note: The 300 series is equipped with 3 potential-free switching outputs assigned to the different finger data sets / users.It may not be possible to read users without fixed fingerprints, particularly children or older people. Network solutions upon request!
FUE-100Complete unit in UP variantFront plate of 2 mm stain-less steel, matte, surround-ing gasket.
Dimensions of front plate (W x H): 120 x 190 mm
Dimensions of UP boxes(W x H x D):100 x 170 x 55 mm
Scanner unit Indoor unit
Designation Variant Item no. DG
Serial 100
FUE-100 Flush-mounted 100.821.0 2FPE-100 Built-in set 150.631.0 2
Serial 300
FUE-300 Flush-mounted 100.821.1 2FPE-300 Built-in set 150.633.0 2
64
Numerical access control
The code lock has two independent relay contacts (24V/1A) which are
controlled by individual codes (1 to 8 digits).
The switching duration of contacts can be set between 1 and 99 sec-
onds. Alternatively, a toggle mode can be configured that turns the
contact on when first activated, then off again when it is activated
again.
If an incorrect code is entered, the code lock blocks for 60 seconds
after the fifth incorrect input and signals this with an alarm tone. Any
additional incorrect entry will trigger the block and alarm tone for
60 seconds again.
All settings for the code lock are changed using the call button, and
protected from unauthorised manipulation by the master code.
Code-Lock
CAEComplete unit*with AP designFront plate of 2 mm stainless steel, matte, sur-rounding aluminium frame, painted in DB703, special security screws, surround-ing gasket.
Dimensions (W x H x D): 160 x 230 x 42 mm
CUEComplete unit* in UP variantFront plate of 2 mm stain-less steel, matte, surround-ing gasket.
Dimensions of front plate (W x H): 120 x 190 mm
Including UP boxes Dimensions (W x H x D): 100 x 170 x 55 mm
CLE-200Code-lock built-in unit*With stainless steel call button for installation in door stations or letter box systems.
Power supply: 15VDC or 12VAC / max. 70mA
Dimensions (W x H x D): 87 x 109 x 25 mm
Code-Lock
* NTR-812 power transformer (order no. 120.100.4) not included.
Designation Variant Item no. DG
Keypass
CAE Wall-mounted 100.241.1 2CUE Flush-mounted 100.221.1 2CLE-200 Built-in unit 150.600.4 2
65
Acc
ess
con
tro
l
Door openers
Door openers
FBL, WBL, WBRLocking plates
FBL: Universal flat cover plates
WBL: DIN left angle cover plate
WBR: DIN right angle cover plate
TOE-17, TOE-17 EStandard door opener
TOE-17: 12 VACTOE-17 E: like the TOE-17, but with mechanical unlocking
ZRT-100 HSDoor opener time relay Door opener runs 1 to 12 seconds (adjustable) after actuation of the door opener and countdown of the switching delay (adjustable 1 to 60 seconds). Advantageous for greater distances between the door intercom station and the house entry door. Advantage: the door opener is activated only for the con-figured time even if the door opener button is held down (short circuit). Top-hat rail mounting. Dimension: 52x93x68mm (W/H/D)Space requirements: 3 TE
NTR-812Power transformerSafety transformer with PTC fuse. Top-hat rail mounting.
Input: 230 VACOutput: 12 VAC / 1.5 ADim.: 35x90x60mm (W/H/D)Space requirements: 2TE
Abbreviations: TE = Top-hat rail unit (1 TE = 17.5 mm)
Designation Variant Item no. DG
Standard door opener
TOE-17 Door opener 149.010.0 2TOE-17 E Door opener mech. unlocking 149.011.0 2
Cover plates
FBL Flat locking plates universal 149.111.0 2WBL Angle locking plate DIN left 149.321.0 2WBR Angle locking plate DIN right 149.331.0 2
System components
NTR-812 Power transformer 120.100.4 2ZRT-100 HS D.O. time relay 120.103.2 2
66
67
M
MO
DES
TAM
OD
ESTA
The MODESTA concept provides you with extensive planning and design options for different building architectures.
Modular stainless steel door stations and pedestals
68
MODESTA presentation
Modular variety - elegant design.
MODESTA pillars and door stations stand for an overall aesthetic con-
cept on pathways, facades or outdoor areas. An elegant system with-
out visible screws, grooves or cladding. Stainless steel, matte brushed,
radiates clarity and value. For the elegant accent, these stainless steel
modules can be combined with a frame in glossy anthracite or brass.
With our custom manufacturing offer, there are almost no limits to
your design ideas. Depending on the architectural style, the elements
of the entry area can be ideally adapted to one another.
Modular construction - maximum freedom of choice.
The modular construction concept provides maximum freedom in the
choice of applications and allows different requirements to be com-
bined as easily as possible.
Select from high-quality technical modules like cameras, digital calling,
different types of access control, speakers and different design elements.
Our partner companies offer integration of additional access control sys-
tems in MODESTA modules. This permits integration into existing com-
munications infrastructures, authentication and time entry solutions.
69
MO
DES
TA
MODESTA presentation
The latest in technology and manufacture.
Many years of experience in metalworking, precise series production, the combination
of traditional processing and the most modern process technologies make it
possible for us to offer a wide variety of adaptations and refinements.
Workpieces are processed either in series or individually,
and in special cases finished by hand.
Utilise our Modesta configurator at: www.elcom.de/modesta
for a compilation of your desires.
70
The call buttons of our own manufacture with their high-quality
matte brushed stainless steel finish offer a long life of reliable functionality.
Modules
Serial SPM
SPM1 - 4 stainless steel but-tons with LED-illuminated, flush-mounted name plates. Name plates can be repla-ced from the front. Writing area (W x H): 49 x 13 mm, for the SPM-210: 80 x 50 mm
120 130 140 210
110
GPM1 - 4 stainless steel but-tons with flush-mounted engraved plates with hid-den screws. Writing area (W x H): 48 x 15 mm, for the GPM-210: 80 x 50 mm
Serial GPM
120 130 140 210
110
SZM1 - 4 stainless steel but-tons with LED-illuminated, flush-mounted name plates. Name plates can be repla-ced from the front. Writing area (W x H): 60 x 12 mm
Serial SZM
120 130 140
110
Designation Variant Item no. DG
Serial SPM
SPM-110 1 Call button, LED-illumin. matte 581.014.1 2SPM-120 2 Call buttons, LED-illumin. matte 581.014.2 2SPM-130 3 Call buttons, LED-illumin. matte 581.014.3 2SPM-140 4 Call buttons, LED-illumin. matte 581.014.4 2SPM-210 1 Call button, LED-illumin. matte 581.014.5 2
Designation Variant Item no. DG
Serial GPM
GPM-110 1 Call button, engraved matte 581.015.1 2GPM-120 2 Call buttons, engraved matte 581.015.2 2GPM-130 3 Call buttons, engraved matte 581.015.3 2GPM-140 4 Call buttons, engraved matte 581.015.4 2GPM-210 1 Call button, engraved matte 581.015.5 2
Designation Variant Item no. DG
Serial SZM
SZM-110 1 Call button, LED-illumin. matte 581.013.1 2SZM-120 2 Call buttons, LED-illumin. matte 581.013.2 2SZM-130 3 Call buttons, LED-illumin. matte 581.013.3 2SZM-140 4 Call buttons, LED-illumin. matte 581.013.4 2
71
MO
DES
TA
Door speaker
for i2 bus systems, complete with ELA-100
Modules
Door speaker
LTM LQM LOM LKM
KPM-900Card reader dummy module for installation of third-party card readers after provision and inspection for technical feasibility.
Access modules
FPM-300Like the FPM-100, but with 3 potential-free switching outputs. Technical data: Page 63
FPM-100Fingerprint, access control consisting of indoor unit and stainless steel scanner unit. Storage capacity for 99 finger data sets/users. 1 potential-free switching output. Only for UP mount-ing and installation in ped-estals. Technical data: Page 63
CLM-100Code lock with 2 independent switching contacts, switching time adjustable from 1 to 99 seconds. Technical data: Page 64
KPM-120Keypass, contact-free ac-cess control for up to 200 keys. LED storage space display, deletion of individual keys possible, includ. master passcard.Technical data: Page 62
KSM-100Keyed button including lock cylinder and two button contacts.
DLM-25612-key stainless steel call button for connection to the DCM-256 display call module. In combination with the DCM-256, direct resident call by entry of telephone number, in addition to code lock func-tions with 2 independent switching contacts. Please refer to page 37 for more information.
DCM-256Call display for up to 256 resident entries with addi-tional information. Simple operation with 3 function keys (up/down/call) with dynamic searching speed. Illuminated LCD display (128 x 64 pixels / 63 x 44 mm). Only available for i2 bus system. Please refer to page 37 for more information.
Module dimensions a uniform 120 x 120 mm
LRM
Speaker modules with modern, fully-equipped door electronics in i2 bus technology.
Here, you can choose from five different speaker grating designs.
Designation Stainless st. Item no. DG
Access modules
KPM-120 Keypass card reader matte 581.070.0 2KPM-900 Card reader dummy matte 581.079.0 2KSM-100 Keyed button matte 581.080.0 2FPM-100 Fingerprint module matte 581.091.0 2FPM-300 Fingerprint module matte 581.090.0 2CLM-100 Code lock matte 581.060.0 2DCM-256 Display call module matte 581.256.0 2DLM-256 12- Call button module matte 581.257.0 2
Designation Variant Item no. DG
For i2 bus systems
LRM-110 i2 bus door speaker matte 581.201.0 2LTM-110 i2 bus door speaker matte 581.202.0 2LQM-110 i2 bus door speaker matte 581.204.0 2LOM-110 i2 bus door speaker matte 581.205.0 2LKM-110 i2 bus door speaker matte 581.206.0 2
72
2DVIDEO
6DVIDEO
6DVIDEO
Camera modules
Modules
LIM-100Info module, white LED illumination, viewing surface: 80 x 80 mm
LLM-105Light module for effective illumination of engraved text, etc., LED (white), can be connected directly to operating voltage (12V AC/DC).
BMM-200IR movement detector including dimmer switch, detection range up to about 8 m, trigger bright-ness and switching delay adjustable (about 1 sec to 3 min).
CVM-200Colour camera for i2 bus 6-wire video system.Camera mechanically adjustable: +/- 20°, Open-ing angle: 74º horizontal, 55º vertical
Technical data: Page 22
TCM-200Colour camera with door speaker for i2 bus 6-wire video system, camera mechanically adjustable: +/- 47º horizontal/vertical, opening angle: 80º horizon-tal, 60º vertical
Technical data: Page 23
STM-100Special call button module, illuminated stainless steel buttons
AMM-100Module for covering empty spaces or as space holder for future extensions.
Module dimensions a uniform 120 x 120 mm
TCM-500Colour camera with door speakers for i2 bus 2-wire video system.Other technical data equiva-lent to the TCM-200.
Function modules
HNM-110House number module with one digit, in robust pluggable design
HNM-120House number module with two digits, in robust pluggable design
Upon request, individual laser engraving on the cover module is available.
Function modules are available in a wide variety of designs. House numbers, signs, lighting and motion detection
modules, in standard designs or as custom modules.
CVM-100B/W camera for i2 bus 6-wire video system.Camera mechanically adjustable: +/- 20°, Open-ing angle: 74º horizontal, 55º vertical
TCM-200 / 500
Designation Stainl. st. Item no. DG
Camera modules TCM
TCM-200 i2 bus camera/door speaker matte 581.235.0 2TCM-500 i2 bus camera/door speaker matte 581.234.0 2
Camera modules CVM
CVM-200 i2 bus colour camera matte 581.237.0 2CVM-100 i2 bus camera B/W matte 581.238.0 2
Designation Stainl. st. Item no. DG
Function modules
BMM-200 movement detector matte 581.052.0 2LLM-105 Light module, LED-illuminated matte 581.594.0 2HNM-110 House number module, one digit matte 581.025.1 2HNM-120 House number module, two dig. matte 581.025.2 2LIM-100 Info module, LED-illuminated matte 581.024.0 2STM-100 Special call button module matte 581.011.1 2AMM-100 Cover module matte 581.040.0 2
73
MO
DES
TA
LED area lighting, special designs
FLM-111 / 112 / 113
LED area lighting
FLM-111LED area lights in stainless steel housingLED colour: whitePower supply: 12V/AC
Dimensions (W x H x D): 195 x 20 x 15 mm
Custom designs
The finishing touch for your architectural masterpiece.
Modified framesare the solution when you need to adapt to structural conditions like wall niches and door frames. An extension for additional engraved areas can be implemented in the same way.
Embossed elementsare a sophisticated form of layout and are implemented by us using high-precision penetra-tion technology. A metal brushing direction rotated by 90° underscores the outstanding effect.
Colour coordinationprovides impressive refinement for mechanical engraving. Multi-coloured company logos, informa-tional and guiding system elements can be put in the scene in a first-class manner.
Mechanical engravingis added using precision CNC-controlled machines, lending the stainless steel object a very massive el-emental, yet still restrained overall impression due to their depth.
The MODESTA program offers you the freedom of design you need to make your entry area a representative business card. Allow
yourself to be inspired by the variety of variations and options, and contact us for a consulting session.
FLM-112LED area lights in stainless steel housingLED colour: whitePower supply: 12V/AC
Dimensions (W x H x D): 325 x 20 x 15 mm
FLM-113LED area lights in stainless steel housingLED colour: whitePower supply: 12V/AC
Dimensions (W x H x D): 460 x 20 x 15 mm
Designation Stainl. st. Item no. DG
Area lights
FLM-111 Area lights LED, 195 mm matte 581.595.1 2FLM-112 Area lights LED, 325 mm matte 581.595.2 2FLM-113 Area lights LED, 460 mm matte 581.595.3 2
74
Serial SMT
Pedestals in stainless steel, matte brushed
Pedestals
SMT-1/1EM SMT-2/1EM SMT-3/1EM SMT-4/2EM SMT-6/2EM
All MODESTA modules can be flush mounted. They are not included in the scope of delivery.Foot plate of 10 mm stainless steel, including fastening materials.Review flap on back side.
Clear design, optimum orientation towards visitors, flexible positioning and very harmonious integration as a stylish element for modern archi-
tectural objects – all these are characteristic of high-quality communication and functional columns. Due to their flexible modular construction,
there is a wide variety of areas of use permitting almost any requirements to be satisfied.
Stainless steel, matte brushed
Designation Variant Dimensions (W x H x D) Foot plate (W x D) Item no. DG
1-row modules
SMT-1/1EM Pedestals 1-row module 195 x 1370 x 84 mm 345 x 150 mm 482.118.0 2SMT-2/1EM Pedestals 1-row 2-modules 195 x 1500 x 84 mm 345 x 150 mm 482.218.0 2SMT-3/1EM Pedestals 1-row 3-modules 195 x 1630 x 84 mm 345 x 150 mm 482.318.0 2
2-row modules
SMT-4/2EM Pedestals 2-row 4-modules 325 x 1500 x 84 mm 475 x 150 mm 482.428.0 2SMT-6/2EM Pedestals 2-row 6-modules 325 x 1630 x 84 mm 475 x 150 mm 482.628.0 2SMT-x/xEM individual pedestals according to requirements according to requirements according to requirements 482.998.0 2
75
MO
DES
TA
Pedestals
Serial SMB
Letter box pedestals in stainless steel, matte brushed
SMB-4/2EM SMB-6/2EM
All MODESTA modules can be flush mounted. They are not included in the scope of delivery.Review flap on back side in the SMB variant, front side review flap in the SMF variant.Foot plate of 10 mm stainless steel, including fastening materials.
SMF-4/2EM SMF-6/2EM
Letter box communications columns are the key to the entry area of business buildings and upscale private residences. The column receives your
mail, regulates building communication and access control, serves as an information medium and also meets refined expectations for representa-
tion. Innovative features leave no desire for operating convenience and ergonomics unfulfilled.
Stainless steel, matte brushed
Designation Variant Dimensions (W x H x D) Foot plate (W x D) Item no. DG
Letter box, back
SMB-4/2EM Letter box pedestals Letter box, back 460 x 1630 x 154 mm 650 x 220 mm 492.428.0 2SMB-6/2EM Letter box pedestals Letter box, back 460 x 1630 x 154 mm 650 x 220 mm 492.628.0 2SMB-x/xEM BK individual pedestals Letter box, back according to requirements according to requirements 492.998.0 2
Letter box, front
SMF-4/2EM Letter box pedestals Letter box, front 460 x 1630 x 154 mm 650 x 220 mm 493.428.0 2SMF-6/2EM Letter box pedestals Letter box, front 460 x 1630 x 154 mm 650 x 220 mm 493.628.0 2SMF-x/xEM BK individual pedestals Letter box, front according to requirements according to requirements 492.998.0 2
76
Wall-mounted frames
Wall-mounted frames
FMA-3/1 EMFMA-1/1 EM FMA-4/1 EMFMA-2/1 EM
FMA-4/2 EM FMA-6/2 EM FMA-9/3 EM
The MODESTA frame system, with its resilience and variability, represents one of the most flexible door station systems on the market.
Stainless steel, matte brushed
MODESTA configurator at: www.elcom.de/modestaDesign your Modesta variant online.
Closed stainless steel profile system with matte design, for support of all MODESTA modules. This also allows subsequent changes to the design of the entry area without problems.
Designation Variant Dim. (W x H x D) Item no. DG
Wall-mounted frames
FMA-1/1EM AP frame matte 175 x 200 x 47 mm 402.118.1 2FMA-2/1EM AP frame matte 175 x 330 x 47 mm 402.218.1 2FMA-3/1EM AP frame matte 175 x 460 x 47 mm 402.318.1 2FMA-4/1EM AP frame matte 175 x 600 x 47 mm 402.418.1 2FMA-4/2EM AP frame matte 305 x 330 x 47 mm 402.428.1 2FMA-6/2EM AP frame matte 305 x 460 x 47 mm 402.628.1 2FMA-9/3EM AP frame matte 425 x 460 x 47 mm 402.938.1 2
77
MO
DES
TA
Flush-mounted frames
Flush-mounted frames
FMU-3/1 EMFMU-1/1 EM
FMU-4/2 EM FMU-6/2 EM FMU-9/3 EM
FMU-4/1 EMFMU-2/1 EM
Stainless steel, matte brushed PVD brass, polishedPVD anthracite, polishedPVD graphite, matte brushed.
The consistent finishing in high-quality stainless steel, combined with its variable modular construction, is absolutely without compromise and,
especially for representative showcase properties in the city centre, meets the highest standards of quality.
* = flush-mounted box, included in scope of delivery
With seven standard sizes, the frame system has the right solution for most cases. Elegant accents can be added with frame finishes in PDV anthracite, graphite or brass.
Designation Dim. (W x H) UPK* (W x H x D) Stainless st. PVD graphite PVD anthracite PVD brass DG
Flush-mounted frames EM GM AP MP
FMU-1/1 UP frame 155 x 180 mm 130 x 155 x 55 mm 401.118.1 401.116.1 401.115.1 401.113.1 2FMU-2/1 UP frame 155 x 310 mm 130 x 285 x 55 mm 401.218.1 401.216.1 401.215.1 401.213.1 2FMU-3/1 UP frame 155 x 440 mm 130 x 415 x 55 mm 401.318.1 401.316.1 401.315.1 401.313.1 2FMU-4/1 UP frame 155 x 580 mm 130 x 555 x 55 mm 401.418.1 401.416.1 401.415.1 401.413.1 2FMU-4/2 UP frame 285 x 310 mm 260 x 285 x 55 mm 401.428.1 401.426.1 401.425.1 401.423.1 2FMU-6/2 UP frame 285 x 440 mm 260 x 415 x 55 mm 401.628.1 401.626.1 401.625.1 401.623.1 2FMU-9/3 UP frame 415 x 440 mm 390 x 415 x 55 mm 401.938.1 401.936.1 401.935.1 401.933.1 2
78
Photo: Moll area
79
EES
TAES
TAMore options for the entry area: Open up new layout free-dom with design and cost-effectiveness, with individuality and functionality.
Stainless steel door stations and letter box systems
80
ELCOM.
ELCOM.
Introducing – the new Esta
The ESTA program provides a very attractive
product range for entrance hall design in up-
scale business and living environments. The
matte brushed stainless steel superbly blends
into the modern entrance area with a high-
grade and understated impression. The brass-
coloured PVD coated versions lend themselves
for classical buildings.
With our new ZENTRA button, we have given
the ESTA stainless steel range a contemporary
look. The flush-mounted button structure with
stainless steel button perfectly fits the door
panels.
Basic stainless steel version data: .. 2mm thick matte brushed stainless steel
front plate.. Modern and attractive ZENTRA button.. All special stainless steel security screws.. Video preparation free of charge
Modern and attractive
BTC video preparation item no. 020.000.2CCV video preparation item no. 020.000.1
Technical data on the cameras can be found on pages 22 - 23.
Standard ESTA door stations offered with audio preparation for ELA door speakers. Preparation for BTC or CCV video cameras
is available free of charge (assuming no change in dimensions). When ordering, please specify the corresponding item number
for the video preparation. Please note our cost-effective audio/video kits on pages 56 - 59.
BTC / CCV
81
ESTA
Stainless steel front plate 2 mm, matte brushed, special safety screws,
flush-mounted box 55 mm in installed depth, with new ZENTRA call
button:
.. Push button of matte stainless steel
.. Flush-mounted name plate
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
Stainless steel, matte
Flush-mounted door stations
Serial TVM
TVM-4/1
TVM-10/2
TVM-18/3
* = flush-mounted box included.
ELA door speaker not included.
Designation Buttons Front (W x H) UPK* (W x H x D) Item no. DG
1-row call button
TVM- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 510.118.0 2TVM- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 510.218.0 2TVM- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 510.318.0 2TVM- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 510.418.0 2TVM- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 510.518.0 2TVM- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 510.618.0 2TVM- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 510.718.0 2TVM- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 510.818.0 2TVM- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 510.918.0 2TVM-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 511.018.0 2TVM-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 511.118.0 2TVM-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 511.218.0 2
2-row call buttons
TVM- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 510.418.1 2TVM- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 510.618.1 2TVM- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 510.818.1 2TVM-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 511.018.1 2TVM-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 511.218.1 2TVM-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 511.418.1 2TVM-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 511.618.1 2TVM-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 511.818.1 2
3-row call buttons
TVM- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 510.918.2 2TVM-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 511.218.2 2TVM-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 511.518.2 2TVM-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 511.818.2 2
82
Flush-mounted doorbell panels
KVM doorbell panels
KVM-10/2
KVM-4/1
* = flush-mounted box included.
Stainless steel front plate 2 mm, matte brushed, special safety screws,
flush-mounted box 55 mm in installed depth, with new ZENTRA call
button:
.. Push button of matte stainless steel
.. Flush-mounted name plate
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
Stainless steel, matte
Designation Buttons Front (W x H) UPK* (W x H x D) Item no. DG
1-row call button
KVM- 1/1 UP doorbell panel 1 150 x 135 mm 130 x 115 x 55 mm 520.128.0 2KVM- 2/1 UP doorbell panel 2 150 x 135 mm 130 x 115 x 55 mm 520.228.0 2KVM- 3/1 UP doorbell panel 3 150 x 195 mm 130 x 175 x 55 mm 520.328.0 2KVM- 4/1 UP doorbell panel 4 150 x 195 mm 130 x 175 x 55 mm 520.428.0 2KVM- 5/1 UP doorbell panel 5 150 x 255 mm 130 x 235 x 55 mm 520.528.0 2KVM- 6/1 UP doorbell panel 6 150 x 255 mm 130 x 235 x 55 mm 520.628.0 2KVM- 7/1 UP doorbell panel 7 150 x 315 mm 130 x 295 x 55 mm 520.728.0 2KVM- 8/1 UP doorbell panel 8 150 x 315 mm 130 x 295 x 55 mm 520.828.0 2KVM- 9/1 UP doorbell panel 9 150 x 375 mm 130 x 355 x 55 mm 520.928.0 2KVM-10/1 UP doorbell panel 10 150 x 375 mm 130 x 355 x 55 mm 521.028.0 2KVM-11/1 UP doorbell panel 11 150 x 435 mm 130 x 415 x 55 mm 521.128.0 2KVM-12/1 UP doorbell panel 12 150 x 435 mm 130 x 415 x 55 mm 521.228.0 2
2-row call buttons
KVM- 6/2 UP doorbell panel 6 230 x 145 mm 210 x 125 x 55 mm 520.628.1 2KVM- 8/2 UP doorbell panel 8 230 x 205 mm 210 x 185 x 55 mm 520.828.1 2KVM-10/2 UP doorbell panel 10 230 x 205 mm 210 x 185 x 55 mm 521.028.1 2KVM-12/2 UP doorbell panel 12 230 x 265 mm 210 x 245 x 55 mm 521.228.1 2
83
ESTA
Flush-mounted door stations
Stainless steel front plate, 2 mm, PVD brass, polished, special security
screws, flush-mounted box 55 mm in installed depth
.. High-quality stainless steel call button
.. Flush-mounted name plate
.. White LED illumination (12VAC)
.. Name plates can be replaced from
the front with a special key
PVD brass, polished
Serial TMG
TMG-10/2
TMG-18/3
TMG-4/1
* = flush-mounted box included.
ELA door speaker not included.
Designation Buttons Front (W x H) UPK* (W x H x D) Item no. DG
1-row call button
TMG- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 110.189.0 2TMG- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 110.289.0 2TMG- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 110.389.0 2TMG- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 110.489.0 2TMG- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 110.589.0 2TMG- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 110.689.0 2TMG- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 110.789.0 2TMG- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 110.889.0 2TMG- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 110.989.0 2TMG-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 111.089.0 2TMG-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 111.189.0 2TMG-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 111.289.0 2
2-row call buttons
TMG- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 110.489.1 2TMG- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 110.689.1 2TMG- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 110.889.1 2TMG-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 111.089.1 2TMG-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 111.289.1 2TMG-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 111.489.1 2TMG-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 111.689.1 2TMG-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 111.889.1 2
3-row call buttons
TMG- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 110.989.2 2TMG-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 111.289.2 2TMG-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 111.589.2 2TMG-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 111.889.2 2
84
Variant EUPpre-mounted, rectangular projecting frame, stainless steel (30 mm on all sides), doors and letter flaps in stainless steel matte, name plates replaceable from the front.All boxes used comply with DIN 13724.
Variant EUT pre-mounted, rectangular projecting frame, stainless steel (30 mm on all sides), doors and letter flaps in stainless steel matte, name plates replaceable from the front. With door electronics slot and stainless steel buttons, LED-illuminated (12VAC), name plate replaceable from the front, universal adapter for existing door speakers.
All boxes used comply with DIN 13724. Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 56 – 59.
Variant EUT
Flush-mounted letter box systems
Variant EUP
EUT-1/1 EUT-2/2 EUT-3/3
EUP-1/1 EUP-2/2 EUP-3/3
* = flush-mounted chassis
* = flush-mounted chassis
Designation Front (W x H) UPG* (W x H x D) Item no. DG
Variant EUT
EUT-1/1 Letter box systems 435 x 515 mm 385 x 465 x 110 mm 322.211.1 2EUT-2/2 Letter box systems 810 x 515 mm 760 x 465 x 110 mm 322.212.2 2EUT-3/3 Letter box systems 1185 x 515 mm 1135 x 465 x 110 mm 322.213.3 2
Designation Front (W x H) UPG* (W x H x D) Item no. DG
Variant EUP
EUP-1/1 Letter box systems 435 x 380 mm 385 x 330 x 110 mm 323.211.1 2EUP-2/2 Letter box systems 810 x 380 mm 760 x 330 x 110 mm 323.212.2 2EUP-3/3 Letter box systems 1185 x 380 mm 1135 x 330 x 110 mm 323.213.3 2
85
ESTA
Variant EAT
Variant EAPSurrounding close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front.
All boxes used comply with DIN 13724.
Variant EATSurrounding close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte. With door electronics slot and stainless steel buttons, LED-illuminated name plates (12VAC) and uni-versal adapter for existing door speakers.
All boxes used comply with DIN 13724. Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 56 – 59.
Wall-mounted letter box systems
Variant EAP
EAT-1/1 EAT-2/2 EAT-3/3
EAP-1/1 EAP-2/2 EAP-3/3
Designation Dim. (W x H x D) Item no. DG
Variant EAT
EAT-1/1 Letter box systems 380 x 460 x 110 mm 328.211.1 2EAT-2/2 Letter box systems 755 x 460 x 110 mm 328.212.2 2EAT-3/3 Letter box systems 1130 x 460 x 110 mm 328.213.3 2
Designation Dim. (W x H x D) Item no. DG
Variant EAP
EAP-1/1 Letter box systems 380 x 325 x 110 mm 329.211.1 2EAP-2/2 Letter box systems 755 x 325 x 110 mm 329.212.2 2EAP-3/3 Letter box systems 1130 x 325 x 110 mm 329.213.3 2
86
EMP Letter box frontof 2 mm stainless steel, matte brushed, name plates replaceable from the front.
AMP Letter box front of 2 mm stainless steel, coated in PVD brass, polished, name plates replaceable from the front.
BDP Pass-through boxes 1-partsDepth can be pulled out.
BDP Pass-through boxes pre-mounted, mail door on back, painted RAL 9006 (white aluminium).All boxes used comply with DIN 13724.
BDP Pass-through boxes 2-partsDepth can be pulled out.
BDP Pass-through boxes 3-partsDepth can be pulled out.
Pass-through letter box systems
EMP Letter box front
AMP Letter box front
BDP Pass-through boxes
EMP-3/1
AMP-3/1
EMP-2/1
AMP-2/1
EMP-1/1
AMP-1/1
125
125 125
260 – 380 mm
260 – 380 mm
125
125
125
380 – 500 mm
380 – 500 mm
260 – 380 mm380 – 500 mm
Designation Dim. (W x H) Item no. DG
EMP Letter box front
EMP-1/1 Letter box front 360 x 185 mm 324.220.1 2EMP-2/1 Letter box front 360 x 310 mm 324.220.2 2EMP-3/1 Letter box front 360 x 435 mm 324.220.3 2
Designation Dim. (W x H) Item no. DG
AMP Letter box front
AMP-1/1 Letter box front 360 x 185 mm 325.320.1 2AMP-2/1 Letter box front 360 x 310 mm 325.320.2 2AMP-3/1 Letter box front 360 x 435 mm 325.320.3 2
Designation Dimensions (W x H x D - D) Item no. DG
BDP-L Pass-through boxes
BDP-1/1-L Box 340 x 165 x 380 mm - 500 mm 320.181.1 2BDP-2/1-L Box 340 x 290 x 380 mm - 500 mm 320.182.1 2BDP-3/1-L Box 340 x 415 x 380 mm - 500 mm 320.183.1 2
Designation Dimensions (W x H x D - D) Item no. DG
BDP-K Pass-through boxes
BDP-1/1-K Box 340 x 165 x 260 mm - 380 mm 320.181.0 2BDP-2/1-K Box 340 x 290 x 260 mm - 380 mm 320.182.0 2BDP-3/1-K Box 340 x 415 x 260 mm - 380 mm 320.183.0 2
87
ESTA
Pass-through letter box systems
EMT Letter box frontof 2 mm stainless steel, matte brushed, door elec-tronics slot, stainless steel call button, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), universal adapter for existing door speakers.
AMT Letter box front of 2 mm stainless steel, coated in PVD brass polished, door electron-ics slot, stainless steel call button, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), universal adapter for existing door speakers.
BDT Pass-through boxes 1-partsDepth can be pulled out.
BDT Pass-through boxes pre-mounted, with door electronics slot for EMT and AMT, mail door on back, painted RAL 9006 (white aluminium). All boxes used comply with DIN 13724. Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 56 – 59.
BDT Pass-through boxes 2-partsDepth can be pulled out.
BDT Pass-through boxes 3-partsDepth can be pulled out.
EMT Letter box front
AMT Letter box front
BDT Pass-through boxes
AMT-3/1
EMT-3/1
AMT-2/1
EMT-2/1
AMT-1/1
EMT-1/1
125
125
125
125
125
125
125
125
125
260 – 380 mm380 – 500 mm
260 – 380 mm380 – 500 mm
260 – 380 mm380 – 500 mm
Designation Dim. (W x H) Item no. DG
EMT Letter box front
EMT-1/1 Letter box front 360 x 310 mm 324.210.1 2EMT-2/1 Letter box front 360 x 435 mm 324.210.2 2EMT-3/1 Letter box front 360 x 560 mm 324.210.3 2
Designation Dim. (W x H) Item no. DG
AMT Letter box front
AMT-1/1 Letter box front 360 x 310 mm 325.310.1 2AMT-2/1 Letter box front 360 x 435 mm 325.310.2 2AMT-3/1 Letter box front 360 x 560 mm 325.310.3 2
Designation Dimensions (W x H x D - D) Item no. DG
BDT-L Pass-through boxes
BDT-1/1-L Box 340 x 290 x 380 mm - 500 mm 320.191.1 2BDT-2/1-L Box 340 x 415 x 380 mm - 500 mm 320.192.1 2BDT-3/1-L Box 340 x 540 x 380 mm - 500 mm 320.193.1 2
Designation Dimensions (W x H x D - D) Item no. DG
BDT-K Pass-through boxes
BDT-1/1-K Box 340 x 290 x 260 mm - 380 mm 320.191.0 2BDT-2/1-K Box 340 x 415 x 260 mm - 380 mm 320.192.0 2BDT-3/1-K Box 340 x 540 x 260 mm - 380 mm 320.193.0 2
88
Fence-mounted letter box systems
Variant EZT
Variant EZP Front plate of 2 mm stainless steel, matte, with surround-ing projection (30 mm), letter slots in front, letter removal door in back, as well as 4-sided close cladding of stainless steel, matte. Name plates replaceable from the front.
All boxes used comply with DIN 13724.
Variant EZT Front plate of 2 mm stainless steel, matte, with surrounding projection (30 mm), letter slots in front, letter removal door in back, as well as 4-sided close cladding of stainless steel, matte. Name plates replaceable from the front. With door electronics slot and stainless steel buttons, LED-illuminated name plates (12VAC) and universal adapter for existing door speakers.
All boxes used comply with DIN 13724. Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 56 – 59.
Variant EZP
EZT-1/1 EZT-2/2 EZT-3/3
EZP-1/1 EZP-2/2 EZP-3/3
Designation Dim. (W x H x D) Item no. DG
Variant EZT
EZT-1/1 Letter box systems 435 x 515 x 112 mm 326.211.1 2EZT-2/2 Letter box systems 810 x 515 x 112 mm 326.212.2 2EZT-3/3 Letter box systems 1185 x 515 x 112 mm 326.213.3 2
Designation Dim. (W x H x D) Item no. DG
Variant EZP
EZP-1/1 Letter box systems 435 x 380 x 112 mm 327.211.1 2EZP-2/2 Letter box systems 810 x 380 x 112 mm 327.212.2 2EZP-3/3 Letter box systems 1185 x 380 x 112 mm 327.213.3 2
89
ESTA
ESP-1/1 ESP-2/2
Variant ESPStainless steel stand pipe (60 mm in diameter) withscrew-on foot plate, inclu-ding fasteners, surround-ing close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front.
All boxes used comply with DIN 13724.
Variant EST Stainless steel stand pipe (60 mm in diameter) withscrew-on foot plate, inclu-ding fasteners, surround-ing close stainless steel cladding, matte, drop edge as rain protection, doors and letter slots of stainless steel matte, name plates replaceable from the front.
With door electronics slot and stainless steel buttons, LED-illuminated name pla-tes (12VAC) and universal adapter for existing door speakers.
All boxes used comply withDIN 13724. Suitable audio and video kits for installa-tion in the door electronics slot of your letter box system can be found in this cata-logue on pages 56 – 59.
Variant EST
Variant ESP
EST-1/1 EST-2/2
Free-standing letter box systems
EST-3/3
ESP-3/3
Designation Dim. (W x H x D) Item no. DG
Variant ESP
ESP-1/1 Letter box systems 380 x 1620 x 190 mm 321.211.1 2ESP-2/2 Letter box systems 915 x 1620 x 110 mm 321.212.2 2ESP-3/3 Letter box systems 1290 x 1620 x 110 mm 321.213.3 2
Designation Dim. (W x H x D) Item no. DG
Variant EST
EST-1/1 Letter box systems 380 x 1620 x 190 mm 320.211.1 2EST-2/2 Letter box systems 915 x 1620 x 110 mm 320.212.2 2EST-3/3 Letter box systems 1290 x 1620 x 110 mm 320.213.3 2
90
Photo: SchwörerHaus
91
SST
AB
ILA
STA
BIL
A
Design and emphasize features entirely according to your taste: ELCOM has the versatile program to view guests and mail in colour.
Door stations and post box systems in ELOXAL and RAL colours
92
ELCOM.
ELCOM.
Introducing – the new Stabila
The STABILA program is one of our classics,
and due to its stability and long life, it enjoys
great popularity in the multifamily residential
construction industry. The design is timeless
and the construction very resilient and easy to
maintain. That makes the STABILA line a very
long-lasting and thus profitable investment
for rental societies.
Reason enough for us to consistently rework
and freshen up the line:
.. New delicate projecting frame profile with
screw-on metal back wall.. Built-in set for sunken installation of the
projecting frame profile.. Modern, attractive ZENTRA call buttons.. New, space-saving speaker profile grate.. All special stainless steel security screws.. Video preparation free of charge
Robust and long-lasting
BTC video preparation item no. 020.000.2CCV video preparation item no. 020.000.1
Technical data on the cameras can be found on pages 22 - 23.
Standard STABILA door stations offered with audio preparation for ELA door speakers. Preparation for BTC or CCV video cam-
eras is available free of charge (assuming no change in dimensions). When ordering, please specify the corresponding item
number for the video preparation. Please note our cost-effective audio/video kits on pages 56 - 59.
BTC / CCV
93
STA
BIL
A
Serial TUP
Flush-mounted door stations
EV1 – Anodised aluminium RAL 9016 Traffic white RAL as specified
* = flush-mounted box included.
TUP flush-mounted door stationAluminium front plate 3 mm, special safety screws, flush-mounted box 55 mm in depth, with new ZENTRA call button:
.. Push button of matte stainless steel
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
ELA door speaker not included.
TUP-15/3
TUP-8/2
Designation Buttons Front (W x H) UPK* (W x H x D) EV1 RAL 9016 RAL spec. DG
1-row call button
TUP- 1/1 UP door station 1 150 x 255 mm 130 x 235 x 55 mm 530.151.0 530.154.0 530.159.0 2TUP- 2/1 UP door station 2 150 x 255 mm 130 x 235 x 55 mm 530.251.0 530.254.0 530.259.0 2TUP- 3/1 UP door station 3 150 x 315 mm 130 x 295 x 55 mm 530.351.0 530.354.0 530.359.0 2TUP- 4/1 UP door station 4 150 x 315 mm 130 x 295 x 55 mm 530.451.0 530.454.0 530.459.0 2TUP- 5/1 UP door station 5 150 x 375 mm 130 x 355 x 55 mm 530.551.0 530.554.0 530.559.0 2TUP- 6/1 UP door station 6 150 x 375 mm 130 x 355 x 55 mm 530.651.0 530.654.0 530.659.0 2TUP- 7/1 UP door station 7 150 x 435 mm 130 x 415 x 55 mm 530.751.0 530.754.0 530.759.0 2TUP- 8/1 UP door station 8 150 x 435 mm 130 x 415 x 55 mm 530.851.0 530.854.0 530.859.0 2TUP- 9/1 UP door station 9 150 x 495 mm 130 x 475 x 55 mm 530.951.0 530.954.0 530.959.0 2TUP-10/1 UP door station 10 150 x 495 mm 130 x 475 x 55 mm 531.051.0 531.054.0 531.059.0 2TUP-11/1 UP door station 11 150 x 555 mm 130 x 535 x 55 mm 531.151.0 531.154.0 531.159.0 2TUP-12/1 UP door station 12 150 x 555 mm 130 x 535 x 55 mm 531.251.0 531.254.0 531.259.0 2
2-row call buttons
TUP- 4/2 UP door station 4 230 x 265 mm 210 x 245 x 55 mm 530.451.1 530.454.1 530.459.1 2TUP- 6/2 UP door station 6 230 x 265 mm 210 x 245 x 55 mm 530.651.1 530.654.1 530.659.1 2TUP- 8/2 UP door station 8 230 x 325 mm 210 x 305 x 55 mm 530.851.1 530.854.1 530.859.1 2TUP-10/2 UP door station 10 230 x 325 mm 210 x 305 x 55 mm 531.051.1 531.054.1 531.059.1 2TUP-12/2 UP door station 12 230 x 385 mm 210 x 365 x 55 mm 531.251.1 531.254.1 531.259.1 2TUP-14/2 UP door station 14 230 x 385 mm 210 x 365 x 55 mm 531.451.1 531.454.1 531.459.1 2TUP-16/2 UP door station 16 230 x 445 mm 210 x 425 x 55 mm 531.651.1 531.654.1 531.659.1 2TUP-18/2 UP door station 18 230 x 445 mm 210 x 425 x 55 mm 531.851.1 531.854.1 531.859.1 2
3-row call buttons
TUP- 9/3 UP door station 9 335 x 295 mm 315 x 275 x 55 mm 530.951.2 530.954.2 530.959.2 2TUP-12/3 UP door station 12 335 x 295 mm 315 x 275 x 55 mm 531.251.2 531.254.2 531.259.2 2TUP-15/3 UP door station 15 335 x 355 mm 315 x 335 x 55 mm 531.551.2 531.554.2 531.559.2 2TUP-18/3 UP door station 18 335 x 355 mm 315 x 335 x 55 mm 531.851.2 531.854.2 531.859.2 2
94
Serial TAP
Wall-mounted door stations with frame
TAP wall-mounted door stations with frameAluminium front plate 3 mm, special safety screws, frame system 42 mm in depth, with new ZENTRA call button:
.. Push button of matte stainless steel
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
ELA door speaker not included.
EV1 – Anodised aluminium RAL 9016 Traffic white RAL as specified
TAP-15/3
TAP-8/2
Designation Call button Dimensions (W x H x D) EV1 RAL 9016 RAL spec. DG
1-row call button
TAP- 1/1 Wall-mounted door station 1 145 x 250 x 42 mm 540.171.0 540.174.0 540.179.0 2TAP- 2/1 Wall-mounted door station 2 145 x 250 x 42 mm 540.271.0 540.274.0 540.279.0 2TAP- 3/1 Wall-mounted door station 3 145 x 310 x 42 mm 540.371.0 540.374.0 540.379.0 2TAP- 4/1 Wall-mounted door station 4 145 x 310 x 42 mm 540.471.0 540.474.0 540.479.0 2TAP- 5/1 Wall-mounted door station 5 145 x 370 x 42 mm 540.571.0 540.574.0 540.579.0 2TAP- 6/1 Wall-mounted door station 6 145 x 370 x 42 mm 540.671.0 540.674.0 540.679.0 2TAP- 7/1 Wall-mounted door station 7 145 x 430 x 42 mm 540.771.0 540.774.0 540.779.0 2TAP- 8/1 Wall-mounted door station 8 145 x 430 x 42 mm 540.871.0 540.874.0 540.879.0 2TAP- 9/1 Wall-mounted door station 9 145 x 490 x 42 mm 540.971.0 540.974.0 540.979.0 2TAP-10/1 Wall-mounted door station 10 145 x 490 x 42 mm 541.071.0 541.074.0 541.079.0 2TAP-11/1 Wall-mounted door station 11 145 x 550 x 42 mm 541.171.0 541.174.0 541.179.0 2TAP-12/1 Wall-mounted door station 12 145 x 550 x 42 mm 541.271.0 541.274.0 541.279.0 2
2-row call buttons
TAP- 4/2 Wall-mounted door station 4 225 x 260 x 42 mm 540.471.1 540.474.1 540.479.1 2TAP- 6/2 Wall-mounted door station 6 225 x 260 x 42 mm 540.671.1 540.674.1 540.679.1 2TAP- 8/2 Wall-mounted door station 8 225 x 320 x 42 mm 540.871.1 540.874.1 540.879.1 2TAP-10/2 Wall-mounted door station 10 225 x 320 x 42 mm 541.071.1 541.074.1 541.079.1 2TAP-12/2 Wall-mounted door station 12 225 x 380 x 42 mm 541.271.1 541.274.1 541.279.1 2TAP-14/2 Wall-mounted door station 14 225 x 380 x 42 mm 541.471.1 541.474.1 541.479.1 2TAP-16/2 Wall-mounted door station 16 225 x 440 x 42 mm 541.671.1 541.674.1 541.679.1 2TAP-18/2 Wall-mounted door station 18 225 x 440 x 42 mm 541.871.1 541.874.1 541.879.1 2
3-row call buttons
TAP- 9/3 Wall-mounted door station 9 330 x 290 x 42 mm 540.971.2 540.974.2 540.979.2 2TAP-12/3 Wall-mounted door station 12 330 x 290 x 42 mm 541.271.2 541.274.2 541.279.2 2TAP-15/3 Wall-mounted door station 15 330 x 350 x 42 mm 541.571.2 541.574.2 541.579.2 2TAP-18/3 Wall-mounted door station 18 330 x 350 x 42 mm 541.871.2 541.874.2 541.879.2 2
95
STA
BIL
A
Flush-mounted built-in set for wall-mounted door stations
TUE flush-mounted built-in set
TUE flush-mounted built-in setpermits the flush mounting of the STABILA TAP projecting frame. The slim projecting frame lends a timeless appear-ance.
The TAP wall-mounted door station is screwed onto the flush-mounted box using special bolt fasteners.
The built-in set is comprised of: - Flush-mounted box, stainless steel - Fastening and packing material
Flush-mounted installation with delicate frame profile.
Designation for door station Dim. (W x H x D) Item no. DG
1-row built-in set
TUE- 2/1 Flush-mounted built-in set TAP- 1/1 and 2/1 130 x 235 x 55 mm 550.102.0 2TUE- 4/1 Flush-mounted built-in set TAP- 3/1 and 4/1 130 x 295 x 55 mm 550.304.0 2TUE- 6/1 Flush-mounted built-in set TAP- 5/1 and 6/1 130 x 355 x 55 mm 550.506.0 2TUE- 8/1 Flush-mounted built-in set TAP- 7/1 and 8/1 130 x 415 x 55 mm 550.708.0 2TUE-10/1 Flush-mounted built-in set TAP- 9/1 and 10/1 130 x 475 x 55 mm 550.910.0 2TUE-12/1 Flush-mounted built-in set TAP-11/1 and 12/1 130 x 535 x 55 mm 551.112.0 2
2-row built-in set
TUE- 6/2 Flush-mounted built-in set TAP- 4/2 and 6/2 210 x 245 x 55 mm 550.406.1 2TUE-10/2 Flush-mounted built-in set TAP- 8/2 and 10/2 210 x 305 x 55 mm 550.810.1 2TUE-14/2 Flush-mounted built-in set TAP-12/2 and 14/2 210 x 365 x 55 mm 551.214.1 2TUE-18/2 Flush-mounted built-in set TAP-16/2 and 18/2 210 x 425 x 55 mm 551.618.1 2
3-row built-in set
TUE-12/3 Flush-mounted built-in set TAP- 9/3 and 12/3 315 x 275 x 55 mm 550.912.2 2TUE-18/3 Flush-mounted built-in set TAP-15/3 and 18/3 315 x 335 x 55 mm 551.518.2 2
96
KUP flush-mounted doorbell panelAluminium front plate 3 mm, silver galvanised (EV1), special safety screws, flush-mounted box 55 mm in depth, with new ZENTRA call button.
KAP wall-mounted doorbell panelAluminium front plate 3 mm, silver galvanised (EV1), special safety screws, aluminium frame system 42 mm in depth, mounted back wall, with new ZENTRA call button.
KAP wall-mounted doorbell panel
KUP flush-mounted doorbell panel
Aluminium doorbell panels
KUP-8/2
KAP-6/1
* = flush-mounted box included.
Functions of the ZENTRA call button
.. Push button of matte stainless steel
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
Functions of the ZENTRA call button
.. Push button of matte stainless steel
.. High-quality microswitch
.. Built-in white LED illumination (12VAC)
.. Homogeneous area lighting
.. Name plates can be replaced from
the front with a special key
Designation Buttons Dim. (W x H x D) Item no. DG
1-row call button
KAP- 1/1 AP doorbell panel 1 145 x 105 x 42 mm 570.121.0 2KAP- 2/1 AP doorbell panel 2 145 x 105 x 42 mm 570.221.0 2KAP- 3/1 AP doorbell panel 3 145 x 165 x 42 mm 570.321.0 2KAP- 4/1 AP doorbell panel 4 145 x 165 x 42 mm 570.421.0 2KAP- 5/1 AP doorbell panel 5 145 x 225 x 42 mm 570.521.0 2KAP- 6/1 AP doorbell panel 6 145 x 225 x 42 mm 570.621.0 2KAP- 7/1 AP doorbell panel 7 145 x 285 x 42 mm 570.721.0 2KAP- 8/1 AP doorbell panel 8 145 x 285 x 42 mm 570.821.0 2KAP- 9/1 AP doorbell panel 9 145 x 345 x 42 mm 570.921.0 2KAP-10/1 AP doorbell panel 10 145 x 345 x 42 mm 571.021.0 2KAP-11/1 AP doorbell panel 11 145 x 405 x 42 mm 571.121.0 2KAP-12/1 AP doorbell panel 12 145 x 405 x 42 mm 571.221.0 2
2-row call buttons
KAP- 6/2 AP doorbell panel 6 225 x 140 x 42 mm 570.621.1 2KAP- 8/2 AP doorbell panel 8 225 x 200 x 42 mm 570.821.1 2KAP-10/2 AP doorbell panel 10 225 x 200 x 42 mm 571.021.1 2KAP-12/2 AP doorbell panel 12 225 x 260 x 42 mm 571.221.1 2
Designation Buttons Front (W x H) UPK* (W x H x D) Item no. DG
1-row call button
KUP- 1/1 UP doorbell panel 1 150 x 135 mm 130 x 115 x 55 mm 560.121.0 2KUP- 2/1 UP doorbell panel 2 150 x 135 mm 130 x 115 x 55 mm 560.221.0 2KUP- 3/1 UP doorbell panel 3 150 x 195 mm 130 x 175 x 55 mm 560.321.0 2KUP- 4/1 UP doorbell panel 4 150 x 195 mm 130 x 175 x 55 mm 560.421.0 2KUP- 5/1 UP doorbell panel 5 150 x 255 mm 130 x 235 x 55 mm 560.521.0 2KUP- 6/1 UP doorbell panel 6 150 x 255 mm 130 x 235 x 55 mm 560.621.0 2KUP- 7/1 UP doorbell panel 7 150 x 315 mm 130 x 295 x 55 mm 560.721.0 2KUP- 8/1 UP doorbell panel 8 150 x 315 mm 130 x 295 x 55 mm 560.821.0 2KUP- 9/1 UP doorbell panel 9 150 x 375 mm 130 x 355 x 55 mm 560.921.0 2KUP-10/1 UP doorbell panel 10 150 x 375 mm 130 x 355 x 55 mm 561.021.0 2KUP-11/1 UP doorbell panel 11 150 x 435 mm 130 x 415 x 55 mm 561.121.0 2KUP-12/1 UP doorbell panel 12 150 x 435 mm 130 x 415 x 55 mm 561.221.0 2
2-row call buttons
KUP- 6/2 UP doorbell panel 6 230 x 145 mm 210 x 125 x 55 mm 560.621.1 2KUP- 8/2 UP doorbell panel 8 230 x 205 mm 210 x 185 x 55 mm 560.821.1 2KUP-10/2 UP doorbell panel 10 230 x 205 mm 210 x 185 x 55 mm 561.021.1 2KUP-12/2 UP doorbell panel 12 230 x 265 mm 210 x 245 x 55 mm 561.221.1 2
97
STA
BIL
A
Flush-mounted letter box systems
Variant JUT
Variant JUP Powder-coated in RAL 9016 (traffic white), pre-mounted round profile projecting frame of aluminium (35 mm on all sides), name plates replaceable from the front.All boxes used comply with DIN 13724.
Variant JUT Powder-coated in RAL 9016 (traffic white), pre-mounted round profile projecting frame of aluminium (35 mm on all sides). With door electronics slot and AV3 combination call buttons, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), aluminium strip grating for existing door speakers. All boxes used comply with DIN 13724.
Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found on catalogue pages 56 – 59.
Variant JUP
Standard colour RAL9016.Other RAL colours avail-able upon request for an additional price.
Standard colour RAL9016.Other RAL colours avail-able upon request for an additional price.
JUP-1/1
JUT-1/1
JUP-2/2
JUT-2/2
JUP-3/3
JUT-3/3
Designation Front (W x H) UPK* (W x H x D) Item no. DG
Variant JUT
JUT-1/1 Letter box systems 445 x 525 mm 385 x 465 x 110 mm 322.311.1 2JUT-2/2 Letter box systems 820 x 525 mm 760 x 465 x 110 mm 322.312.2 2JUT-3/3 Letter box systems 1195 x 525 mm 1135 x 465 x 110 mm 322.313.3 2
Designation Front (W x H) UPK* (W x H x D) Item no. DG
Variant JUP
JUP-1/1 Letter box systems 445 x 390 mm 385 x 330 x 110 mm 323.311.1 2JUP-2/2 Letter box systems 820 x 390 mm 760 x 330 x 110 mm 323.312.2 2JUP-3/3 Letter box systems 1195 x 390 mm 1135 x 330 x 110 mm 323.313.3 2
98
Pass-through letter box systems
JMT Letter box frontFronts of 3 mm aluminium, powder-coated RAL 9016 (traffic white), with door electronics slot, AV3 combination call button, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), aluminium strip grating for existing door speaker, see below for additional pass-through box.
Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found on catalogue pages 56 – 59.
JMT Letter box front
Standard colour RAL9016.Other RAL colours avail-able upon request for an additional price.
JMT-3/1JMT-2/1JMT-1/1
BDT Pass-through boxes 1-partsDepth can be pulled out.
BDT Pass-through boxes pre-mounted, with door electronics slot for EMT and AMT, mail door on back, painted RAL 9006 (white aluminium). All boxes used comply with DIN 13724. Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found in this catalogue on pages 56 – 59.
BDT Pass-through boxes 2-partsDepth can be pulled out.
BDT Pass-through boxes 3-partsDepth can be pulled out.
BDT Pass-through boxes
125
125
125
125
125
125
125
125
125
260 – 380 mm380 – 500 mm
260 – 380 mm380 – 500 mm
260 – 380 mm380 – 500 mm
Designation Dim. (W x H) Item no. DG
JMT Letter box front
JMT-1/1 Letter box front 360 x 310 mm 324.310.1 2JMT-2/1 Letter box front 360 x 435 mm 324.310.2 2JMT-3/1 Letter box front 360 x 560 mm 324.310.3 2
Designation Dimensions (W x H x D - D) Item no. DG
BDT-L Pass-through boxes
BDT-1/1-L Box 340 x 290 x 380 mm - 500 mm 320.191.1 2BDT-2/1-L Box 340 x 415 x 380 mm - 500 mm 320.192.1 2BDT-3/1-L Box 340 x 540 x 380 mm - 500 mm 320.193.1 2
Designation Dimensions (W x H x D - D) Item no. DG
BDT-K Pass-through boxes
BDT-1/1-K Box 340 x 290 x 260 mm - 380 mm 320.191.0 2BDT-2/1-K Box 340 x 415 x 260 mm - 380 mm 320.192.0 2BDT-3/1-K Box 340 x 540 x 260 mm - 380 mm 320.193.0 2
99
STA
BIL
A
Variant JAT
Variant JAPPowder-coated, RAL 9016 (traffic white), 3-sided, close aluminium flat profile cladding for optimum weather protection, name plates replaceable from the front. All boxes used comply with DIN 13724.
Variant JATPowder-coated, RAL 9016 (traffic white), 3-sided, close aluminium flat profile cladding for optimum weather pro-tection. With door electronics slot and AV3 combination call buttons, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), aluminium strip grating for existing door speakers. All boxes used comply with DIN 13724.
Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found on catalogue pages 56 – 59.
Wall-mounted letter box systems
Variant JAP
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
JAP-1/1 JAP-2/2 JAP-3/3
JAT-1/1 JAT-2/2 JAT-3/3
Designation Dim. (W x H x D) Item no. DG
Variant JAT
JAT-1/1 Letter box systems 405 x 470 x 110 mm 328.311.1 2JAT-2/2 Letter box systems 780 x 470 x 110 mm 328.312.2 2JAT-3/3 Letter box systems 1155 x 470 x 110 mm 328.313.3 2
Designation Dim. (W x H x D) Item no. DG
Variant JAP
JAP-1/1 Letter box systems 405 x 335 x 150 mm 329.311.1 2JAP-2/2 Letter box systems 780 x 335 x 150 mm 329.312.2 2JAP-3/3 Letter box systems 1155 x 335 x 150 mm 329.313.3 2
100
Fence-mounted letter box systems
Variant JZT
Variant JZP Front plates of 3 mm aluminium, powder-coated RAL 9016 (traffic white), letter slots on front, removal door in back as well as 3-sided close aluminium flat profile cladding for optimum weather protection, name plates replaceable from the front. All boxes used comply with DIN 13724.
Variant JZT With door electronics slot and AV3 combination call buttons, name plates replaceable from the front, LED-illuminated (only in door electronics slot, 12VAC required), aluminium strip grating for existing door speakers. All boxes used comply with DIN 13724.
Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found on catalogue pages 56 – 59.
Variant JZP
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
Letter box removal doors hinged on right. Hinged on left upon request.
JZP-1/1 JZP-2/2 JZP-3/3
JZT-1/1 JZT-2/2 JZT-3/3
Designation Dim. (W x H x D) Item no. DG
Variant JZT
JZT-1/1 Letter box systems 405 x 470 x 150 mm 326.311.1 2JZT-2/2 Letter box systems 780 x 470 x 150 mm 326.312.2 2JZT-3/3 Letter box systems 1155 x 470 x 150 mm 326.313.3 2
Designation Dim. (W x H x D) Item no. DG
Variant JZP
JZP-1/1 Letter box systems 405 x 335 x 150 mm 327.311.1 2JZP-2/2 Letter box systems 780 x 335 x 150 mm 327.312.2 2JZP-3/3 Letter box systems 1155 x 335 x 150 mm 327.313.3 2
101
STA
BIL
A
Variant JSPPowder-coated, RAL 9016 (traffic white), square pipe aluminium profile with screw-on foot plates, 4-sided, close aluminium flat profile cladding for op-timum weather protection, name plates replaceable from the front. All boxes used comply with DIN 13724.
Variant JST Powder-coated, RAL 9016 (traffic white), square pipe aluminium profile with screw-on foot plates, 4-sided, close aluminium flat profile cladding for optimum weather protection. With door electronics slot and stainless steel buttons, LED-illuminated name pla-tes (12VAC) and universal adapter for exising door speakers. All boxes used comply with DIN 13724.
Suitable audio and video kits for installation in the door electronics slot of your letter box system can be found on catalogue pages 56 – 59.
Variant JST
Variant JSP
Free-standing letter box systems
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
Standard colour RAL 9016. Other RAL colours avail-able upon request for an additional price.
JST-1/1
JSP-1/1
JST-2/2
JSP-2/2
JST-3/3
JSP-3/3
Designation Dim. (W x H x D) Item no. DG
Variant JST
JST-1/1 Letter box systems 485 x 1500 x 150 mm 320.311.1 2JST-2/2 Letter box systems 860 x 1500 x 150 mm 320.312.2 2JST-3/3 Letter box systems 1235 x 1500 x 150 mm 320.313.3 2
Designation Dim. (W x H x D) Item no. DG
Variant JSP
JSP-1/1 Letter box systems 485 x 1500 x 150 mm 321.311.1 2JSP-2/2 Letter box systems 860 x 1500 x 150 mm 321.312.2 2JSP-3/3 Letter box systems 1235 x 1500 x 150 mm 321.313.3 2
102
103103
Rep
lace
men
t p
arts
Wherever ELCOM is, you find solid, long-lasting quality. And replacement parts logistics for maximum protection of investment. Even during upgrades, you can always rely on our optimum delivery service.
Replacement parts
104
Replacement parts
TMD-3Call button module
CCV-402, 1+n B/W camera module
TMD-2Call button module
CCV-100, i2-BUS B/W camera module
CCV-200, i2-BUS Colour camera module
TMD-1Call button module
ELD-100, i2-BUS Door speaker module
ELD-402, 1+n Door speaker module
DOMINO
KPS doorbell panelfor existing UP boxes in plate structures; smooth, 3mm aluminium front plate, silver galvanised (EV1), combina-tion call button with name plate replacement from the front.
KPS doorbell panel Designation Variant Colour Item no. DG
TDM Call button module
TMD-1 Call button module, traffic white 1 Button RAL 9016 150.111.0 2TMD-1 Call button module, grey alumin. 1 Button RAL 9007 150.113.0 2TMD-2 Call button module, traffic white 2 Buttons RAL 9016 150.121.0 2TMD-2 Call button module, grey alumin. 2 Buttons RAL 9007 150.123.0 2TMD-3 Call button module, traffic white 3 Buttons RAL 9016 150.131.0 2TMD-3 Call button module, grey alumin. 3 Buttons RAL 9007 150.133.0 2
i2-BUS Door speaker module
ELD-100 Door speaker module i2-BUS RAL 9016 170.221.0 2ELD-100 Door speaker module i2-BUS RAL 9007 170.223.0 2
1+n Door speaker module
ELD-402 Door speaker module 1+n RAL 9016 120.421.0 2ELD-402 Door speaker module 1+n RAL 9007 120.423.0 2
i2-BUS Camera modules
CCV-100 Camera module, B/W i2-BUS RAL 9016 181.302.0 2CCV-100 Camera module, B/W i2-BUS RAL 9007 181.303.0 2CCV-200 Colour camera module i2-BUS RAL 9016 181.322.0 2
1+n camera module
CCV-402 Camera module, B/W 1+n RAL 9016 231.302.0 2CCV-402 Camera module, B/W 1+n RAL 9007 231.303.0 2
KPS doorbell panels
KPS- 8/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.008.S 2KPS-10/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.010.S 2KPS-12/2 UP doorbell panel 133 x 173 mm EV1 galvanised 991.012.S 2
105
Rep
lace
men
t p
arts
Replacement parts
Video intercoms
VMO-802, 1+n B/W video intercomBVM-100, i2-BUS B/W video intercomBrightness and contrast controls, door opener and light buttons, automatic video activation upon call, 12 call tones can be selected, 6 of them are gong sounds, call terminator with LED control display, blocked against visual/audio monitoring.
BVM-140, i2-BUS B/W video house stationBasic function identical to BVM-100; additional functions:Four illuminated function keys, 6 gong sounds
HT-VMO-802, 1+n Replacement audio unit for the VMO-802 video house station
HT-BVM-100, i2-BUS Replacement audio unit for the BVM-100 video house station
MO-VMO/BVMReplacement video unit for the VMO-802/BVM-100 video house stations
HT universal 2, 1+n Universal intercomconfigurable for 302+402 systems.
HT-802, 1+nIntercom with call volume control
BHT-100, i2-BUS Audio intercom
FT-802, 1+nHands-free intercom ABS plastic, wall unit.
Audio intercoms
TK-a/b interface
TK-a/b interfaceTK-a/b interface permits the connection of the 1+n door intercom system to the a/b interface of a telephone system (pbx). No special TFE interface is required.
Dimensions (W x H x D): 185 mm x 215 mm x 42 mm wall mounted.
Designation System Colour Item no. DG
Intercoms
HT-Universal2 Intercom 1+n white 130.881.0 2HT-802 Intercom 1+n white 130.860.8 2BHT-100 Intercom i2-BUS white 170.100.0 2
Hands-free point
FT-802 Hands-free intercom 1+n white 130.890.1 2
Video house stations
VMO-802 Video intercom 1+n white 232.100.0 2BVM-100 Video intercom i2-BUS white 182.100.0 2BVM-140 Video intercom i2-BUS white 182.140.0 2
Individual components video house stations
HT-VMO-802 Audio unit 1+n white 008.500.100 2HT-BVM-100 Audio unit i2-BUS white 008.500.101 2MO-VMO/BVM Video unit white 008.500.006 2
Telecommunications interface
TK-a/b interface 1+n white 120.801.0 2
106
Replacement parts
SR-12, 1+nControl relay Potential-free Switch contact
CCV-402, 1+n Built-in B/W camera module
ZRT-100 BWDoor opener time relayFastening tray
VUG-220 A, 1+nVideo switch
VUG-220 B, 1+nVideo switch
USG-2 BW, 1+nUSG-2 HS, 1+nTone generator for storey callVoice route switching unit for storey door stations. BW = fastening tray HS = top-hat rail mount-ing.
VVE-103, 1+nThree-way video distributor
VVE-105, 1+nFive-way video distributor
CCS-402, 1+n B/W outdoor camera
TDM-HS, 1+nDoor opener any time function Note: Only for systems with potential isolation.
Cameras and system components 1+n
RMS-4/6/10 BWPrivacy feature 1+nFastening tray
RMG-10 BW, 1+nDiode distributorNote:No RMS module can be mounted!
ELA-302, 1+nELA-402 ERG, 1+nDoor electronics
TLA-302, 1+nTLA-402, 1+nTLA-402 ERG, 1+nDoor electronics
Designation Variant Item no. DG
Outdoor cameras and camera module
CCV-402 Stainless steel outdoor camera B/W 231.400.0 2CCV-402 Built-in camera module B/W 231.300.2 2
Built-in door electronics
TLA-302 Built-in door electronics 120.311.0 2TLA-402 Built-in door electronics 120.411.0 2TLA-402 ERG Built-in door electronics 120.411.3 2ELA-302 Built-in door electronics 120.331.0 2ELA-402 ERG Built-in door electronics 120.431.3 2
Splitting amplifier and Switching units
VVE-103 Video distributor 3 ways 231.610.3 2VVE-105 Video distributor 5 ways 231.610.5 2VUG-220A Video switch 231.614.0 2VUG-220B Video switch 231.614.1 2USG-2 BW Tone generator (storey call) 140.005.6 2USG-2 HS Tone generator (storey call) 140.005.5 2
Privacy feature and diode distributor
RMS-4 BW Privacy feature 4 intercoms 140.001.4 2RMS-6 BW Privacy feature 6 intercoms 140.001.6 2RMS-10 BW Privacy feature 10 intercoms 140.011.0 2RMG-10 BW Diode distributor 140.010.0 2
Others
SR-12 Control relay 140.003.0 2TDM-HS Door opener any time 120.106.0 2ZRT-100 BW Door opener time relay 120.103.3 2
107
Rep
lace
men
t p
arts
BKM-103, i2-BUSCoupler multiplexer
Replacement parts
Cameras and system components i2 bus
Lighting for door stations
LED illumination12 V, AC/DC
Festoon lamp18V / 3W
SGR-210Voltage rectifier regulatorFor power supply to FLMMODESTA area lighting
Input: 12V / ACOutput: 10V / DC
CCS-100, i2-BUS B/W outdoor camera
CCS-110, i2-BUS Long-range B/W out-door camera
CCV-100, i2-BUS Built-in B/W camera module
TLA-100, i2-BUSDoor electronics
* = unit (1 GU = 17.5 mm)
Designation Variant Item no. DG
Festoon lamp
Festoon lamp 18V / 3W 150.510.1 2
LED illumination
LED illumination 60 mm green 150.511.4 2LED illumination 80 mm green 150.511.3 2LED illumination 120 mm green 150.511.5 2LED illumination 180 mm green 150.511.6 2LED illumination 225 mm green 150.511.7 2LED illumination 280 mm green 150.511.8 2LED illumination 550 mm green 150.511.9 2LED illumination 60 mm white 150.519.4 2LED illumination 80 mm white 150.519.3 2LED illumination 120 mm white 150.519.5 2LED illumination 180 mm white 150.519.6 2LED illumination 225 mm white 150.519.7 2LED illumination 280 mm white 150.519.8 2LED illumination 550 mm white 150.519.9 2LED-SPM-110 for MODESTA SPM-110 white 150.518.1 2LED-SPM-120 for MODESTA SPM-120 white 150.518.2 2LED-SPM-130 for MODESTA SPM-130 white 150.518.3 2LED-SPM-140 for MODESTA SPM-140 white 150.518.4 2
Voltage rectifier
SGR-210 Voltage rectifier for FLM 120.021.0 2
Designation Variant Item no. DG
Outdoor cameras and camera module
CCV-100 Stainless steel outdoor camera B/W 181.400.0 2CCV-110 Stainless steel outdoor camera B/W 181.401.0 2CCV-100 Built-in camera module B/W 181.300.2 2
Built-in door electronics
TLA-100 Built-in door electronics 170.211.0 2
Others
BKM-103 Coupler multiplexer 190.123.0 2
108
Replacement parts
AV2 Call buttonW x H: 74 x 22 mmSupport dim.: 71 x19 mm
AV2 Sign holder
AV2 Name plate insert
AV2 Call button key
AV2 Light insert
Lighted button:External dim.: ø23 mmSupport dim.: ø16 mm
LT-101 LED Alu EV1
LT-102 LED MS gold
LT-103 LED stainless steel, matte
AV3Built-in name plateW x H: 70 x 20.3 mmSupport dim.: 50.7 x 16.3 mm
AV3 Call buttonW x H: 82 x 24 mmSupport dim.: 80 x 19.8 mm
AV3 Sign holder
AV3 Name plate insert
AV3 Call button key
AV3 Light insert
Call button:External dim.: ø21mmSupport dim.: ø18 mm
ESK-252 AEE Stainless steel, matte
ESK-252 ALBBrass, bronzed
ESK-252 AEM PVD brass
ESK-252 AEA PVD anthracite
GPMMODESTA engraved plate
Call buttons and name plates
AVZRear-mounted call buttonsHousing dimensions (W x H): 94 x 27 mm
AVZ Call buttonW x H: 85 x 28 mmSupport dim.: 80 x 23.3 mm
AVZ Sign holder
AVZ Name plate insert
AVZ Call button key
AVZ Light insert
Designation Variant Item no. DG
AV2
AV2 Call button EV1 150.413.0 2
AV2 Call button C34 150.414.0 2
AV2 Call button RAL 9016 150.415.0 2
AV2 Sign holder 815.050.0 2
AV2 Name plate insert 150.418.2 2
AV2 Call button key 150.416.0 2
AV2 Light insert 150.418.0 2
AV3
AV3 Built-in name plate 150.441.0 2
AV3 Call button EV1 150.443.0 2
AV3 Call button RAL 8019 150.444.0 2
AV3 Call button RAL 9016 150.445.0 2
AV3 Call button RAL specification 150.445.5 2
AV3 Sign holder 829.700.0 2
AV3 Name plate insert 829.700.1 2
AV3 Call button key 150.446.0 2
AV3 Light insert 150.448.0 2
Designation Variant Item no. DG
AVZ
AVZ Rear-mounted call buttons 150.468.0 2AVZ Call button EV1 150.453.0 2AVZ Call button RAL 9016 150.455.0 2AVZ Call button RAL as specified 150.455.5 2AVZ Sign holder 839.700.0 2AVZ Name plate insert 150.458.2 2AVZ Call button key 150.456.0 2AVZ Light insert 150.458.0 2
Call button
ESK-252 AEE Call button Stainl. st., matte 150.314.1 2ESK-252 ALB Call button Brass, bronzed 150.400.1 2ESK-252 AEM Call button PVD brass 150.400.2 2ESK-252 AEA Call button PVD anthracite 150.400.5 2
Lighted button
LT-101 Lighted button Alu EV1 150.316.1 2LT-102 Lighted button MS-gold 150.316.2 2LT-103 Lighted button Stainl. st., matte 150.316.3 2
GCM/GPM
GPM Engraved plate Stainless steel 150.328.1 2
109
Rep
lace
men
t p
arts
UPKSupport extension25 mm, for all flush-mounted boxes
Keyfor two-holed screw
Screw Two-holed
Special key SW6 ZY
Special stainless steel screw, matte ZYPVD-MS ZYPVD-AN ZY
Replacement parts
Letter box locks:
BKS-100 ESTA IKS-100 ESTA BKS-110 STABILA IKS-110 STABILA BKS-120 SMB/SMF
each including 2 keys
TMD combination call buttonW x H: 65 x 21.7 mmSupport dim.: 61 x18 mm
TMD replacement coverW x H: 57.2 x 14.4 mm
KPS combination call buttonW x H: 63 x 21 mmSupport dim.: 60 x18 mm
KPS replacement coverW x H: 57.2 x 14.4 mm
Locks, keys and screws
Allen screw M2.5x5 INB 1.5 mm
Allen screw M4x10 INB 2.5
Allen screw UNC 24 INB 2.5
Allen keyINB 1.5 mm
Allen key INB 2.5 mm
Letter box key:
BKS-200/210 ESTA / STABILA
IKS-200/210 ESTA ESTA / STABILA
BKS-220 SMB/SMF
BKN-STABILA Name plate
Designation Variant Item no. DG
KPS
KPS combination call button Anthracite 150.217.0 2KPS replacement cover 150.213.4 2
TMD
TMD combination call button Crystal clear 150.217.4 2TMD replacement cover 150.213.2 2
BKN
BKN STABILA Name plate 150.470.0 2
Letter box locks
BKS-100 ESTA Letter box locks 150.470.1 2IKS-100 ESTA Insta box locks 150.470.2 2BKS-110 STABILA Letter box locks 150.471.1 2IKS-110 STABILA Insta box locks 150.471.2 2BKS-120 SMB/SMF Letter box locks 150.472.1 2
Letter box key
BKS-200/210 Letter box key 150.479.8 2IKS-200/210 Letter box key 150.479.9 2BKS-220 Letter box key 150.479.7 2
Designation Variant Item no. DG
Screws
Screw M2.5x5 INB1.5 Stainless steel 033.002.9 2Screw M4x10 INB2.5 Stainless steel 033.003.4 2Screw UNC 24 INB2.5 Stainless steel 033.000.7 2Two-holed screw LI/SE Stainless steel 033.004.9 2Two-holed screw ZY Stainless steel 033.005.3 2Two-holed screw LI/SE PVD brass 033.004.6 2Two-holed screw ZY PVD brass 033.005.6 2Special screw ZY, M5x12 Stainless steel 033.007.0 2Special screw ZY, M5x22 Stainless steel 033.006.0 2Special screw ZY, M5x22 PVD brass 033.006.1 2Special screw ZY, M5x22 PVD anthrac. 033.006.2 2Special screw ZY, M5x42 Stainless steel 033.008.0 2
Key
Allen key INB 1.5 033.000.9 2Allen key INB 2.5 033.000.8 2Key for two-holed screw 033.001.0 2Special key SW6 ZY 033.000.1 2
Support extension
UPK-M5 Support extension M5-M5 033.010.4 2
110
Product list – alphabetical
AEK-1 1 WE 100.014.1 56 AEK-2 2 WE 100.014.2 56 AEK-3 3 WE 100.014.3 56 AKB-01 1 WE 100.190.1 57 AKB-02 2 WE 100.190.2 57 AKB-03 3 WE 100.190.3 57 AKB-04 4 WE 100.190.4 57 AKB-05 5 WE 100.190.5 57 AKB-06 6 WE 100.190.6 57 AKB-07 7 WE 100.190.7 57 AKB-08 8 WE 100.190.8 57 AKB-09 9 WE 100.190.9 57 AKB-10 10 WE 100.191.0 57 AKB-11 11 WE 100.191.1 57 AKB-12 12 WE 100.191.2 57 AKB-14 14 WE 100.191.4 57 AKB-15 15 WE 100.191.5 57 AKB-16 16 WE 100.191.6 57 AKB-18 18 WE 100.191.8 57 AKF-01 1 WE 100.180.1 57 AKF-02 2 WE 100.180.2 57 AKF-03 3 WE 100.180.3 57 AKF-04 4 WE 100.180.4 57 AKF-05 5 WE 100.180.5 57 AKF-06 6 WE 100.180.6 57 AKF-07 7 WE 100.180.7 57 AKF-08 8 WE 100.180.8 57 AKF-09 9 WE 100.180.9 57 AKF-10 10 WE 100.181.0 57 AKF-11 11 WE 100.181.1 57 AKF-12 12 WE 100.181.2 57 AKF-14 14 WE 100.181.4 57 AKF-15 15 WE 100.181.5 57 AKF-16 16 WE 100.181.6 57 AKF-18 18 WE 100.181.8 57 AKG-01/16 1 - 16 WE 100.200.0 57 AMM-100 Stainless steel 581.040.0 72 AMP-1/1 PVD brass 325.320.1 86 AMP-2/1 PVD brass 325.320.2 86 AMP-3/1 PVD brass 325.320.3 86 AMT-1/1 PVD brass 325.310.1 87 AMT-2/1 PVD brass 325.310.2 87 AMT-3/1 PVD brass 325.310.3 87 ASA-1MS PVD brass 100.091.6 54 ASA-2MS PVD brass 100.092.6 54 ASA-3MS PVD brass 100.093.6 54 ASP-1EL EV1 100.071.1 53 ASP-1WS RAL9016 100.071.4 53 ASP-2EL EV1 100.072.1 53 ASP-2WS RAL9016 100.072.4 53 ASP-3EL EV1 100.073.1 53 ASP-3WS RAL9016 100.073.4 53 ASU-1EL EV1 100.051.1 52 ASU-1WS RAL9016 100.051.4 52 ASU-2EL EV1 100.052.1 52 ASU-2WS RAL9016 100.052.4 52 ASU-3EL EV1 100.053.1 52 ASU-3WS RAL9016 100.053.4 52 ASZ-1EM Stainless steel 100.071.8 55 ASZ-2EM Stainless steel 100.072.8 55 ASZ-3EM Stainless steel 100.073.8 55 ATB-1SI silver 102.191.1 51 ATB-1WS white 102.191.4 51 ATB-2SI silver 102.192.1 51 ATB-2WS white 102.192.4 51 ATB-3SI silver 102.193.1 51 ATB-3WS white 102.193.4 51 ATF-1SI silver 103.181.1 51 ATF-1WS white 103.181.4 51 ATF-2SI silver 103.182.1 51 ATF-2WS white 103.182.4 51 ATF-3SI silver 103.183.1 51 ATF-3WS white 103.183.4 51 AV2 call button EV1 150.413.0 108 AV2 call button C34 150.414.0 108 AV2 call button RAL9016 150.415.0 108 AV2 holder 815.050.0 108 AV2 key 150.416.0 108 AV2 L insert 150.418.0 108 AV2 N insert 150.418.2 108
AV3 call button EV1 150.443.0 108 AV3 call button RAL8019 150.444.0 108 AV3 call button RAL9016 150.445.0 108 AV3 call button RAL spec. 150.445.5 108 AV3 holder 829.700.0 108 AV3 key 150.446.0 108 AV3 L insert 150.448.0 108 AV3 N insert 829.700.1 108 AV3 sign 150.441.0 108 AVM-200 6-wire video 231.705.0 36 AVZ call button 150.468.0 108 AVZ call button EV1 150.453.0 108 AVZ call button RAL9016 150.455.0 108 AVZ call button RAL spec. 150.455.5 108 AVZ key 150.456.0 108 AVZ L insert 150.458.0 108 AVZ N holder 839.700.0 108 AVZ N insert 150.458.2 108
BAA-500 2-wire video 180.650.0 25 BAA-520 2-wire video 180.652.0 25 BBS-256 6-wire video 190.151.0 29 BBS-256 6-wire video 190.151.0 32 BDP-1/1-K up to 380mm 320.181.0 86 BDP-1/1-L up to 500mm 320.181.1 86 BDP-2/1-K up to 380mm 320.182.0 86 BDP-2/1-L up to 500mm 320.182.1 86 BDP-3/1-K up to 380mm 320.183.0 86 BDP-3/1-L up to 500mm 320.183.1 86 BDT-1/1-K up to 380 mm 320.191.0 87 BDT-1/1-K up to 380 mm 320.191.0 98 BDT-1/1-L up to 500mm 320.191.1 87 BDT-1/1-L up to 500mm 320.191.1 98 BDT-2/1-K up to 380 mm 320.192.0 87 BDT-2/1-K up to 380 mm 320.192.0 98 BDT-2/1-L up to 500mm 320.192.1 87 BDT-2/1-L up to 500mm 320.192.1 98 BDT-3/1-K up to 380 mm 320.193.0 87 BDT-3/1-K up to 380 mm 320.193.0 98 BDT-3/1-L up to 500mm 320.193.1 87 BDT-3/1-L up to 500mm 320.193.1 98 BER-100 i2-BUS 190.200.0 27 BFT-200 white 171.200.0 21 BHT-100 i2-BUS 170.100.0 105 BHT-200 white 170.200.0 20 BHT-280 white 170.280.0 20 BKM-003 190.124.8 31 BKM-012 190.124.9 31 BKM-024 190.125.0 31 BKM-048 190.125.1 31 BKM-103 i2-BUS 190.123.0 107 BKM-141 6-wire video 190.124.1 31 BKM-142 6-wire video 190.124.2 31 BKM-143 6-wire video 190.124.3 31 BKM-144 6-wire video 190.124.4 31 BKM-145 6-wire video 190.124.5 31 BKN 150.470.0 109 BKS-100 150.470.1 109 BKS-110 150.471.1 109 BKS-120 150.472.1 109 BKS-200/210 150.479.8 109 BKS-220 150.479.7 109 BKV-100 i2-BUS 190.121.0 27 BLA-100 i2-BUS 190.110.0 25 BLA-100 i2-BUS 190.110.0 27 BMM-200 Stainless steel 581.052.0 72 BPI-200 i2-BUS 190.304.0 35 BPI-210 i2-BUS 190.305.0 27 BSR-100 6-wire video 190.190.0 29 BSR-110 i2-BUS 190.111.0 27 BSR-120 i2-BUS 190.112.0 27 BSR-130 i2-BUS 190.114.0 27 BSR-200 i2-BUS 190.113.0 27 BSV-100 i2-BUS 170.411.0 27 BSV-200 6-wire video 170.412.0 29 BSV-500 2-wire video 170.415.0 25 BTA-230 silver 270.001.0 50 BTA-230 white 270.004.0 50 BTC-200 6-wire video 181.620.0 23 BTC-500 2-wire video 181.650.0 23 BTE-116 i2-BUS 170.311.6 25
BTE-116 i2-BUS 170.311.6 26 BTI-256 i2-BUS 190.140.0 34 BTV-230 silver 280.001.0 48 BTV-230 white 280.004.0 48 BVC-280 6-wire video 182.280.5 33 BVF-200 6-wire video 183.200.0 18 BVF-230/E square 183.232.0 17 BVF-230/R rounded 183.231.0 17 BVF-260/BM Base module 183.262.0 16 BVF-260/E-GN mint green 183.262.5 16 BVF-260/E-GR graphite 183.262.5 16 BVF-260/E-SW black 183.262.2 16 BVF-260/E-BR umber 183.262.4 16 BVF-260/E-WS white 183.262.3 16 BVF-260/R-GN mint green 183.264.5 16 BVF-260/R-GR graphite 183.264.5 16 BVF-260/R-SW black 183.264.2 16 BVF-260/R-BR umber 183.264.4 16 BVF-260/R-WS white 183.264.3 16 BVF-500 2-wire video 183.500.0 18 BVF-UPK-UNI 300.090.1 16 BVF-UPK-UNI 300.090.1 17 BVM-100 i2-BUS 182.100.0 105 BVM-140 i2-BUS 182.140.0 105 BVM-280 white 182.280.0 19 BVM-280 platinum 182.284.0 19 BVS-200 6-wire video 190.312.0 35 BVU-100 6-wire video 180.410.0 29 BVV-203 6-wire video 180.620.3 29 BVV-203 6-wire video 180.620.3 58 BVV-206 6-wire video 180.620.6 29 BVV-206 6-wire video 180.620.6 58 BVV-223 6-wire video 180.622.3 29 BVV-223 6-wire video 180.622.3 58 BVV-501 2-wire video 180.650.1 25 BVV-502 2-wire video 180.650.2 25 BVV-504 2-wire video 180.650.4 25 BVV-521 2-wire video 180.652.1 25 BVV-522 2-wire video 180.652.2 25 BVV-524 2-wire video 180.652.4 25
CAE Wall-mounted 100.241.1 64 CCS-100 i2-BUS 181.400.0 107 CCS-110 i2-BUS 181.401.0 107 CCS-200 6-wire video 181.420.0 22 CCS-210 6-wire video 181.421.0 22 CCS-402 1+n 231.400.0 106 CCV-100 RAL9016 181.302.0 104 CCV-100 RAL9007 181.303.0 104 CCV-100 i2-BUS 181.300.2 107 CCV-200 6-wire video 181.320.2 22 CCV-200 RAL9016 181.322.0 104 CCV-402 RAL9016 231.302.0 104 CCV-402 RAL9007 231.303.0 104 CCV-402 1+n 231.300.2 106 CLE-200 Built-in 150.600.4 64 CLM-100 Stainless steel 581.060.0 71 CUE Flush-mounted 100.221.1 64 CVM-100 Stainless steel 581.238.0 72 CVM-200 Stainless steel 581.237.0 72
DCI-256 i2-BUS 150.715.0 37 DCM-256 Stainless steel 581.256.0 37 DCM-256 Stainless steel 581.256.0 71 DLM-256 Stainless steel 581.257.0 37 DLM-256 Stainless steel 581.257.0 71
EAP-1/1 Stainless steel 329.211.1 85 EAP-2/2 Stainless steel 329.212.2 85 EAP-3/3 Stainless steel 329.213.3 85 EAT-1/1 Stainless steel 328.211.1 85 EAT-2/2 Stainless steel 328.212.2 85 EAT-3/3 Stainless steel 328.213.3 85 ELA-100 i2-BUS 170.212.0 26 ELA-302 1+n 120.331.0 106 ELA-402 1+n 120.431.0 41 ELA-402 ERG 1+n 120.431.3 106 ELD-100 RAL9016 170.221.0 104 ELD-100 RAL9007 170.223.0 104
A
Item Variant Item no. Page Item Variant Item no. Page Item Variant Item no. Page
B
C
D
E
111
Serv
ices
Product list – alphabetical
ELD-402 RAL9016 120.421.0 104 ELD-402 RAL9007 120.423.0 104 EMP-1/1 Stainless steel 324.220.1 86 EMP-2/1 Stainless steel 324.220.2 86 EMP-3/1 Stainless steel 324.220.3 86 EMT-1/1 Stainless steel 324.210.1 87 EMT-2/1 Stainless steel 324.210.2 87 EMT-3/1 Stainless steel 324.210.3 87 ERG-402 1+n 120.102.4 41 ESK-252 AEA PVD anthracite 150.400.5 108 ESK-252 AEE Stainless steel 150.314.1 108 ESK-252 AEM PVD brass 150.400.2 108 ESK-252 ALB Brass 150.400.1 108 ESP-1/1 Stainless steel 321.211.1 89 ESP-2/2 Stainless steel 321.212.2 89 ESP-3/3 Stainless steel 321.213.3 89 EST-1/1 Stainless steel 320.211.1 89 EST-2/2 Stainless steel 320.212.2 89 EST-3/3 Stainless steel 320.213.3 89 EUP-1/1 Stainless steel 323.211.1 84 EUP-2/2 Stainless steel 323.212.2 84 EUP-3/3 Stainless steel 323.213.3 84 EUT-1/1 Stainless steel 322.211.1 84 EUT-2/2 Stainless steel 322.212.2 84 EUT-3/3 Stainless steel 322.213.3 84 EZP-1/1 Stainless steel 327.211.1 88 EZP-2/2 Stainless steel 327.212.2 88 EZP-3/3 Stainless steel 327.213.3 88 EZT-1/1 Stainless steel 326.211.1 88 EZT-2/2 Stainless steel 326.212.2 88 EZT-3/3 Stainless steel 326.213.3 88
FBL 149.111.0 65 FLM-111 Stainless steel 581.595.1 73 FLM-112 Stainless steel 581.595.2 73 FLM-113 Stainless steel 581.595.3 73 FMA-1/1EM Stainless steel 402.118.1 76 FMA-2/1EM Stainless steel 402.218.1 76 FMA-3/1EM Stainless steel 402.318.1 76 FMA-4/1EM Stainless steel 402.418.1 76 FMA-4/2EM Stainless steel 402.428.1 76 FMA-6/2EM Stainless steel 402.628.1 76 FMA-9/3EM Stainless steel 402.938.1 76 FMU-1/1AP PVD anthracite 401.115.1 77 FMU-1/1EM Stainless steel 401.118.1 77 FMU-1/1GM PVD graphite 401.116.1 77 FMU-1/1MP PVD brass 401.113.1 77 FMU-2/1AP PVD anthracite 401.215.1 77 FMU-2/1EM Stainless steel 401.218.1 77 FMU-2/1GM PVD graphite 401.216.1 77 FMU-2/1MP PVD brass 401.213.1 77 FMU-3/1AP PVD anthracite 401.315.1 77 FMU-3/1EM Stainless steel 401.318.1 77 FMU-3/1GM PVD graphite 401.316.1 77 FMU-3/1MP PVD brass 401.313.1 77 FMU-4/1AP PVD anthracite 401.415.1 77 FMU-4/1EM Stainless steel 401.418.1 77 FMU-4/1GM PVD graphite 401.416.1 77 FMU-4/1MP PVD brass 401.413.1 77 FMU-4/2AP PVD anthracite 401.425.1 77 FMU-4/2EM Stainless steel 401.428.1 77 FMU-4/2GM PVD graphite 401.426.1 77 FMU-4/2MP PVD brass 401.423.1 77 FMU-6/2AP PVD anthracite 401.625.1 77 FMU-6/2EM Stainless steel 401.628.1 77 FMU-6/2GM PVD graphite 401.626.1 77 FMU-6/2MP PVD brass 401.623.1 77 FMU-9/3AP PVD anthracite 401.935.1 77 FMU-9/3EM Stainless steel 401.938.1 77 FMU-9/3GM PVD graphite 401.936.1 77 FMU-9/3MP PVD brass 401.933.1 77 FPE-100 Built-in 150.631.0 63 FPE-300 Built-in 150.633.0 63 FPM-100 Stainless steel 581.091.0 71 FPM-300 Stainless steel 581.090.0 71 FT-802 1+n 130.890.1 105 FUE-100 Flush-mounted 100.821.0 63 FUE-300 Flush-mounted 100.821.1 63
GPM Stainless steel 150.328.1 108
GPM-110 Stainless steel 581.015.1 70 GPM-120 Stainless steel 581.015.2 70 GPM-130 Stainless steel 581.015.3 70 GPM-140 Stainless steel 581.015.4 70 GPM-210 Stainless steel 581.015.5 70
HAT-402 1+n 130.810.0 40 HNM-110 Stainless steel 581.025.1 72 HNM-120 Stainless steel 581.025.2 72 HT universal2 1+n 130.881.0 105 HT-802 1+n 130.860.8 105 HT-BVM-100 i2-BUS 8.500.101 105 HT-VMO-802 1+n 8.500.100 105
IKS-100 150.470.2 109 IKS-110 150.471.2 109 IKS-200/210 150.479.9 109
JAP-1/1 RAL9016 329.311.1 99 JAP-2/2 RAL9016 329.312.2 99 JAP-3/3 RAL9016 329.313.3 99 JAT-1/1 RAL9016 328.311.1 99 JAT-2/2 RAL9016 328.212.2 99 JAT-3/3 RAL9016 328.213.3 99 JMT-1/1 RAL9016 324.310.1 98 JMT-2/1 RAL9016 324.310.2 98 JMT-3/1 RAL9016 324.310.3 98 JSP-1/1 RAL9016 321.311.1 101 JSP-2/2 RAL9016 321.312.2 101 JSP-3/3 RAL9016 321.313.3 101 JST-1/1 RAL9016 320.311.1 101 JST-2/2 RAL9016 320.312.2 101 JST-3/3 RAL9016 320.313.3 101 JUP-1/1 RAL9016 323.311.1 97 JUP-2/2 RAL9016 323.312.2 97 JUP-3/3 RAL9016 323.313.3 97 JUT-1/1 RAL9016 322.311.1 97 JUT-2/2 RAL9016 322.312.2 97 JUT-3/3 RAL9016 322.313.3 97 JZP-1/1 RAL9016 327.311.1 101 JZP-2/2 RAL9016 327.312.2 101 JZP-3/3 RAL9016 327.313.3 101 JZT-1/1 RAL9016 326.311.1 101 JZT-2/2 RAL9016 326.312.2 101 JZT-3/3 RAL9016 326.313.3 101
KAE Wall-mounted 100.641.1 62 KAP-1/1 EV1 570.121.0 96 KAP-10/1 EV1 571.021.0 96 KAP-10/2 EV1 571.021.1 96 KAP-11/1 EV1 571.121.0 96 KAP-12/1 EV1 571.221.0 96 KAP-12/2 EV1 571.221.1 96 KAP-2/1 EV1 570.221.0 96 KAP-3/1 EV1 570.321.0 96 KAP-4/1 EV1 570.421.0 96 KAP-5/1 EV1 570.521.0 96 KAP-6/1 EV1 570.621.0 96 KAP-6/2 EV1 570.621.1 96 KAP-7/1 EV1 570.721.0 96 KAP-8/1 EV1 570.821.0 96 KAP-8/2 EV1 570.821.1 96 KAP-9/1 EV1 570.921.0 96 Key INB 1.5 033.000.9 109 Key INB 2.5 033.000.8 109 Key 2L 033.001.0 109 Key ZY 033.000.1 109 KPA-003 150.622.3 62 KPA-010 150.622.1 62 KPC-003 150.621.3 62 KPC-010 150.621.1 62 KPM-120 Stainless steel 581.070.0 71 KPM-900 Stainless steel 581.079.0 71 KPR-200 Built-in 150.620.0 62 KPS- 8/2 EV1 991.008.S 109 KPS call button Anthracite 150.217.0 104 KPS cover 150.213.4 109 KPS-10/2 EV1 991.010.S 104
KPS-12/2 EV1 991.012.S 104 KSM-100 Stainless steel 581.080.0 71 KUE Flush-mounted 100.621.1 62 KUP-1/1 EV1 560.121.0 96 KUP-10/1 EV1 561.021.0 96 KUP-10/2 EV1 561.021.1 96 KUP-11/1 EV1 561.121.0 96 KUP-12/1 EV1 561.221.0 96 KUP-12/2 EV1 561.221.1 96 KUP-2/1 EV1 560.221.0 96 KUP-3/1 EV1 560.321.0 96 KUP-4/1 EV1 560.421.0 96 KUP-5/1 EV1 560.521.0 96 KUP-6/1 EV1 560.621.0 96 KUP-6/2 EV1 560.621.1 96 KUP-7/1 EV1 560.721.0 96 KUP-8/1 EV1 560.821.0 96 KUP-8/2 EV1 560.821.1 96 KUP-9/1 EV1 560.921.0 96 KVM-1/1 Stainless steel 520.128.0 82 KVM-10/1 Stainless steel 521.028.0 82 KVM-10/2 Stainless steel 521.028.1 82 KVM-11/1 Stainless steel 521.128.0 82 KVM-12/1 Stainless steel 521.228.0 82 KVM-12/2 Stainless steel 521.228.1 82 KVM-2/1 Stainless steel 520.228.0 82 KVM-3/1 Stainless steel 520.328.0 82 KVM-4/1 Stainless steel 520.428.0 82 KVM-5/1 Stainless steel 520.528.0 82 KVM-6/1 Stainless steel 520.628.0 82 KVM-6/2 Stainless steel 520.628.1 82 KVM-7/1 Stainless steel 520.728.0 82 KVM-8/1 Stainless steel 520.828.0 82 KVM-8/2 Stainless steel 520.828.1 82 KVM-9/1 Stainless steel 520.928.0 82
LED 120mm green 150.511.5 107 LED 120mm white 150.519.5 107 LED 180mm green 150.511.6 107 LED 180mm white 150.519.6 107 LED 225mm green 150.511.7 107 LED 225mm white 150.519.7 107 LED 280mm green 150.511.8 107 LED 280mm white 150.519.8 107 LED 550mm green 150.511.9 107 LED 550mm white 150.519.9 107 LED 60mm green 150.511.4 107 LED 60mm white 150.519.4 107 LED 80mm green 150.511.3 107 LED 80mm white 150.519.3 107 LED-SPM-110 white 150.518.1 107 LED-SPM-120 white 150.518.2 107 LED-SPM-130 white 150.518.3 107 LED-SPM-140 white 150.518.4 107 LIM-100 Stainless steel 581.024.0 72 LKM-110 Stainless steel 581.206.0 71 LLM-105 Stainless steel 581.594.0 72 LOM-110 Stainless steel 581.205.0 71 LQM-110 Stainless steel 581.204.0 71 LRM-110 Stainless steel 581.201.0 71 LT-101 Alu EV1 150.316.1 108 LT-102 MS-gold 150.316.2 108 LT-103 Stainless steel 150.316.3 108 LTM-110 Stainless steel 581.202.0 71
MO-VMO/BVM 8.500.006 105
NGV-500 2-wire video 231.415.0 25 NGV-850 6-wire video 231.410.5 29 NSG-200 white 170.152.0 21 NSG-802 1+n 130.901.0 40 NTR-812 120.100.4 25 NTR-812 120.100.4 27 NTR-812 120.100.4 41
RMG-10 BW 1+n 140.010.0 106 RMS-10 BW 1+n 140.011.0 106 RMS-10 HS 1+n 140.021.0 41
H
I
J
K
L
M
N
R
Item Variant Item no. Page Item Variant Item no. Page Item Variant Item no. Page
F
G
112
Product list – alphabetical
RMS-4 BW 1+n 140.001.4 106 RMS-4 HS 1+n 140.020.4 41 RMS-6 BW 1+n 140.001.6 106 RMS-6 HS 1+n 140.020.6 41 RSR-200 i2-BUS 190.180.0 27 RSR-220 6-wire video 190.182.0 29 RSR-402 1+n 140.004.0 41 RSR-500 2-wire video 190.185.0 25
Screw 2L-LI Stainless steel 033.004.9 109 Screw 2L-LI PVD brass 033.004.6 109 Screw 2L-ZY Stainless steel 033.005.3 109 Screw 2L-ZY PVD brass 033.005.6 109 Screw M2.5 Stainless steel 033.002.9 109 Screw M4 Stainless steel 033.003.4 109 Screw S-ZY12 Stainless steel 033.007.0 109 Screw S-ZY22 Stainless steel 033.006.0 109 Screw S-ZY22 PVD brass 033.006.1 109 Screw S-ZY22 PVD anthracite 033.006.2 109 Screw S-ZY42 Stainless steel 033.008.0 109 Screw UNC Stainless steel 033.000.7 109 SGR-210 for FLM 120.021.0 107 SMB-4/2EM Stainless steel 492.428.0 75 SMB-6/2EM Stainless steel 492.628.0 75 SMB-x/xEM Stainless steel 492.998.0 75 SMF-4/2EM Stainless steel 493.428.0 75 SMF-6/2EM Stainless steel 493.628.0 75 SMF-x/xEM Stainless steel 493.998.0 75 SMT-1/1EM Stainless steel 482.118.0 74 SMT-2/1EM Stainless steel 482.218.0 74 SMT-3/1EM Stainless steel 482.318.0 74 SMT-4/2EM Stainless steel 482.428.0 74 SMT-6/2EM Stainless steel 482.628.0 74 SMT-x/xEM Stainless steel 482.998.0 74 Sofitte 150.510.1 107 SPM-110 Stainless steel 581.014.1 70 SPM-120 Stainless steel 581.014.2 70 SPM-130 Stainless steel 581.014.3 70 SPM-140 Stainless steel 581.014.4 70 SPM-210 Stainless steel 581.014.5 70 SR-12 1+n 140.003.0 106 STM-100 Stainless steel 581.011.1 72 SZM-110 Stainless steel 581.013.1 70 SZM-120 Stainless steel 581.013.2 70 SZM-130 Stainless steel 581.013.3 70 SZM-140 Stainless steel 581.013.4 70
TAP-1/1 EV1 540.171.0 94 TAP-1/1 RAL9016 540.174.0 94 TAP-1/1 RAL spec. 540.179.0 94 TAP-10/1 EV1 541.071.0 94 TAP-10/1 RAL9016 541.074.0 94 TAP-10/1 RAL spec. 541.079.0 94 TAP-10/2 EV1 541.071.1 94 TAP-10/2 RAL9016 541.074.1 94 TAP-10/2 RAL spec. 541.079.1 94 TAP-11/1 EV1 541.171.0 94 TAP-11/1 RAL9016 541.174.0 94 TAP-11/1 RAL spec. 541.179.0 94 TAP-12/1 EV1 541.271.0 94 TAP-12/1 RAL9016 541.274.0 94 TAP-12/1 RAL spec. 541.279.0 94 TAP-12/2 EV1 541.271.1 94 TAP-12/2 RAL9016 541.274.1 94 TAP-12/2 RAL spec. 541.279.1 94 TAP-12/3 EV1 541.271.2 94 TAP-12/3 RAL9016 541.274.2 94 TAP-12/3 RAL spec. 541.279.2 94 TAP-14/2 EV1 541.471.1 94 TAP-14/2 RAL9016 541.474.1 94 TAP-14/2 RAL spec. 541.479.1 94 TAP-15/3 EV1 541.571.2 94 TAP-15/3 RAL9016 541.574.2 94 TAP-15/3 RAL spec. 541.579.2 94 TAP-16/2 EV1 541.671.1 94 TAP-16/2 RAL9016 541.674.1 94 TAP-16/2 RAL spec. 541.679.1 94 TAP-18/2 EV1 541.871.1 94 TAP-18/2 RAL9016 541.874.1 94 TAP-18/2 RAL spec. 541.879.1 94
TAP-18/3 EV1 541.871.2 94 TAP-18/3 RAL9016 541.874.2 94 TAP-18/3 RAL spec. 541.879.2 94 TAP-2/1 EV1 540.271.0 94 TAP-2/1 RAL9016 540.274.0 94 TAP-2/1 RAL spec. 540.279.0 94 TAP-3/1 EV1 540.371.0 94 TAP-3/1 RAL9016 540.374.0 94 TAP-3/1 RAL spec. 540.379.0 94 TAP-4/1 EV1 540.471.0 94 TAP-4/1 RAL9016 540.474.0 94 TAP-4/1 RAL spec. 540.479.0 94 TAP-4/2 EV1 540.471.1 94 TAP-4/2 RAL9016 540.474.1 94 TAP-4/2 RAL spec. 540.479.1 94 TAP-5/1 EV1 540.571.0 94 TAP-5/1 RAL9016 540.574.0 94 TAP-5/1 RAL spec. 540.579.0 94 TAP-6/1 EV1 540.671.0 94 TAP-6/1 RAL9016 540.674.0 94 TAP-6/1 RAL spec. 540.679.0 94 TAP-6/2 EV1 540.671.1 94 TAP-6/2 RAL9016 540.674.1 94 TAP-6/2 RAL spec. 540.679.1 94 TAP-7/1 EV1 540.771.0 94 TAP-7/1 RAL9016 540.774.0 94 TAP-7/1 RAL spec. 540.779.0 94 TAP-8/1 EV1 540.871.0 94 TAP-8/1 RAL9016 540.874.0 94 TAP-8/1 RAL spec. 540.879.0 94 TAP-8/2 EV1 540.871.1 94 TAP-8/2 RAL9016 540.874.1 94 TAP-8/2 RAL spec. 540.879.1 94 TAP-9/1 EV1 540.971.0 94 TAP-9/1 RAL9016 540.974.0 94 TAP-9/1 RAL spec. 540.979.0 94 TAP-9/3 EV1 540.971.2 94 TAP-9/3 RAL9016 540.974.2 94 TAP-9/3 RAL spec. 540.979.2 94 TCM-200 Stainless steel 581.235.0 72 TCM-500 Stainless steel 581.234.0 72 TDM-HS 1+n 120.106.0 106 TK-a/b INTERFACE 120.801.0 105 TKA-UNI 130.120.0 21 TKA-UNI 1+n 130.120.0 40 TKV-200 230.120.0 18 TKV-280 230.128.0 19 TLA-100 i2-BUS 170.211.0 107 TLA-302 1+n 120.311.0 106 TLA-402 1+n 120.411.0 106 TLA-402 ERG 1+n 120.411.3 106 TMD call button Crystal clear 150.217.4 109 TMD cover 150.213.2 109 TMD-1 RAL9016 150.111.0 104 TMD-1 RAL9007 150.113.0 104 TMD-2 RAL9016 150.121.0 104 TMD-2 RAL9007 150.123.0 104 TMD-3 RAL9016 150.131.0 104 TMD-3 RAL9007 150.133.0 104 TMG- 4/2 PVD brass 110.489.1 83 TMG- 6/2 PVD brass 110.689.1 83 TMG- 8/2 PVD brass 110.889.1 83 TMG- 9/3 PVD brass 110.989.2 83 TMG-1/1 PVD brass 110.189.0 83 TMG-10/1 PVD brass 111.089.0 83 TMG-10/2 PVD brass 111.089.1 83 TMG-11/1 PVD brass 111.189.0 83 TMG-12/1 PVD brass 111.289.0 83 TMG-12/2 PVD brass 111.289.1 83 TMG-12/3 PVD brass 111.289.2 83 TMG-14/2 PVD brass 111.489.1 83 TMG-15/3 PVD brass 111.589.2 83 TMG-16/2 PVD brass 111.689.1 83 TMG-18/2 PVD brass 111.889.1 83 TMG-18/3 PVD brass 111.889.2 83 TMG-2/1 PVD brass 110.289.0 83 TMG-3/1 PVD brass 110.389.0 83 TMG-4/1 PVD brass 110.489.0 83 TMG-5/1 PVD brass 110.589.0 83 TMG-6/1 PVD brass 110.689.0 83 TMG-7/1 PVD brass 110.789.0 83 TMG-8/1 PVD brass 110.889.0 83
TMG-9/1 PVD brass 110.989.0 83 TOE-17 149.010.0 65 TOE-17E 149.011.0 65 TUE-10/1 550.910.0 95 TUE-10/2 550.810.1 95 TUE-12/1 551.112.0 95 TUE-12/3 550.912.2 95 TUE-14/2 551.214.1 95 TUE-18/2 551.618.1 95 TUE-18/3 551.518.2 95 TUE-2/1 550.102.0 95 TUE-4/1 550.304.0 95 TUE-6/1 550.506.0 95 TUE-6/2 550.406.1 95 TUE-8/1 550.708.0 95 TUP-1/1 EV1 530.151.0 93 TUP-1/1 RAL9016 530.154.0 93 TUP-1/1 RAL spec. 530.159.0 93 TUP-10/1 EV1 531.051.0 93 TUP-10/1 RAL9016 531.054.0 93 TUP-10/1 RAL spec. 531.059.0 93 TUP-10/2 EV1 531.051.1 93 TUP-10/2 RAL9016 531.054.1 93 TUP-10/2 RAL spec. 531.059.1 93 TUP-11/1 EV1 531.151.0 93 TUP-11/1 RAL9016 531.154.0 93 TUP-11/1 RAL spec. 531.159.0 93 TUP-12/1 EV1 531.251.0 93 TUP-12/1 RAL9016 531.254.0 93 TUP-12/1 RAL spec. 531.259.0 93 TUP-12/2 EV1 531.251.1 93 TUP-12/2 RAL9016 531.254.1 93 TUP-12/2 RAL spec. 531.259.1 93 TUP-12/3 EV1 531.251.2 93 TUP-12/3 RAL9016 531.254.2 93 TUP-12/3 RAL spec. 531.259.2 93 TUP-14/2 EV1 531.451.1 93 TUP-14/2 RAL9016 531.454.1 93 TUP-14/2 RAL spec. 531.459.1 93 TUP-15/3 EV1 531.551.2 93 TUP-15/3 RAL9016 531.554.2 93 TUP-15/3 RAL spec. 531.559.2 93 TUP-16/2 EV1 531.651.1 93 TUP-16/2 RAL9016 531.654.1 93 TUP-16/2 RAL spec. 531.659.1 93 TUP-18/2 EV1 531.851.1 93 TUP-18/2 RAL9016 531.854.1 93 TUP-18/2 RAL spec. 531.859.1 93 TUP-18/3 EV1 531.851.2 93 TUP-18/3 RAL9016 531.854.2 93 TUP-18/3 RAL spec. 531.859.2 93 TUP-2/1 EV1 530.251.0 93 TUP-2/1 RAL9016 530.254.0 93 TUP-2/1 RAL spec. 530.259.0 93 TUP-3/1 EV1 530.351.0 93 TUP-3/1 RAL9016 530.354.0 93 TUP-3/1 RAL spec. 530.359.0 93 TUP-4/1 EV1 530.451.0 93 TUP-4/1 RAL9016 530.454.0 93 TUP-4/1 RAL spec. 530.459.0 93 TUP-4/2 EV1 530.451.1 93 TUP-4/2 RAL9016 530.454.1 93 TUP-4/2 RAL spec. 530.459.1 93 TUP-5/1 EV1 530.551.0 93 TUP-5/1 RAL9016 530.554.0 93 TUP-5/1 RAL spec. 530.559.0 93 TUP-6/1 EV1 530.651.0 93 TUP-6/1 RAL9016 530.654.0 93 TUP-6/1 RAL spec. 530.659.0 93 TUP-6/2 EV1 530.651.1 93 TUP-6/2 RAL9016 530.654.1 93 TUP-6/2 RAL spec. 530.659.1 93 TUP-7/1 EV1 530.751.0 93 TUP-7/1 RAL9016 530.754.0 93 TUP-7/1 RAL spec. 530.759.0 93 TUP-8/1 EV1 530.851.0 93 TUP-8/1 RAL9016 530.854.0 93 TUP-8/1 RAL spec. 530.859.0 93 TUP-8/2 EV1 530.851.1 93 TUP-8/2 RAL9016 530.854.1 93 TUP-8/2 RAL spec. 530.859.1 93 TUP-9/1 EV1 530.951.0 93
S
T
Item Variant Item no. Page Item Variant Item no. Page Item Variant Item no. Page
113
Serv
ices
Product list – alphabetical
TUP-9/1 RAL9016 530.954.0 93 TUP-9/1 RAL spec. 530.959.0 93 TUP-9/3 EV1 530.951.2 93 TUP-9/3 RAL9016 530.954.2 93 TUP-9/3 RAL spec. 530.959.2 93 TVM-1/1 Stainless steel 510.118.0 81 TVM-10/1 Stainless steel 511.018.0 81 TVM-10/2 Stainless steel 511.018.1 81 TVM-11/1 Stainless steel 511.118.0 81 TVM-12/1 Stainless steel 511.218.0 81 TVM-12/2 Stainless steel 511.218.1 81 TVM-12/3 Stainless steel 511.218.2 81 TVM-14/2 Stainless steel 511.418.1 81 TVM-15/3 Stainless steel 511.518.2 81 TVM-16/2 Stainless steel 511.618.1 81 TVM-18/2 Stainless steel 511.818.1 81 TVM-18/3 Stainless steel 511.818.2 81 TVM-2/1 Stainless steel 510.218.0 81 TVM-3/1 Stainless steel 510.318.0 81 TVM-4/1 Stainless steel 510.418.0 81 TVM-4/2 Stainless steel 510.418.1 81 TVM-5/1 Stainless steel 510.518.0 81 TVM-6/1 Stainless steel 510.618.0 81 TVM-6/2 Stainless steel 510.618.1 81 TVM-7/1 Stainless steel 510.718.0 81 TVM-8/1 Stainless steel 510.818.0 81 TVM-8/2 Stainless steel 510.818.1 81 TVM-9/1 Stainless steel 510.918.0 81 TVM-9/3 Stainless steel 510.918.2 81
UPK-M5 033.010.4 109 USG-200A 1+n 140.006.0 41 USG-200B 1+n 140.006.1 41 USG-2BW 1+n 140.005.6 106 USG-2HS 1+n 140.005.5 106
VBP-1MS PVD brass 107.171.6 46 VBP-2MS PVD brass 107.172.6 46 VBP-3MS PVD brass 107.173.6 46 VBZ-1EM Stainless steel 106.161.8 47 VBZ-2EM Stainless steel 106.162.8 47 VBZ-3EM Stainless steel 106.163.8 47 VFP-1MS PVD brass 109.171.6 44 VFP-2MS PVD brass 109.172.6 44 VFP-3MS PVD brass 109.173.6 44 VFZ-1EM Stainless steel 108.161.8 45 VFZ-2EM Stainless steel 108.162.8 45 VFZ-3EM Stainless steel 108.163.8 45 VKG-200/BTC 1 - 16 WE 100.131.1 58 VKG-200/CCS 1 - 16 WE 100.133.1 59 VKG-200/CCV 1 - 16 WE 100.132.1 59 VMO-802 1+n 232.100.0 105 VSU-100 6-wire video 231.620.0 29 VSU-110 6-wire video 231.621.0 29 VSU-110 6-wire video 231.621.0 36 VTB-1SI silver 104.191.1 49 VTB-1WS white 104.191.4 49 VTB-2SI silver 104.192.1 49 VTB-2WS white 104.192.4 49 VTB-3SI silver 104.193.1 49 VTB-3WS white 104.193.4 49 VTF-1SI silver 105.181.1 49 VTF-1WS white 105.181.4 49 VTF-2SI silver 105.182.1 49 VTF-2WS white 105.182.4 49 VTF-3SI silver 105.183.1 49 VTF-3WS white 105.183.4 49 VUG-220A 1+n 231.614.0 106 VUG-220B 1+n 231.614.1 106 VVE-103 1+n 231.610.3 106 VVE-105 1+n 231.610.5 106
WBL 149.321.0 65 WBR 149.331.0 65
ZRT-100BW 1+n 120.103.3 106 ZRT-100HS 120.103.2 65
U
V
W
Z
Item Variant Item no. Page
114
General terms and conditionsI. General information1. Supplies, services and offerings from ELCOM shall be offered only
subject to these General Terms and Conditions (GTC). No other conditions shall apply even if ELCOM delivers the product without specific reservations.
2. These GTC also apply to future transactions with customer, even if ELCOM has not specifically referred to the applicability of these General Terms and Conditions. Any deviations from these terms shall require the written confirmation of ELCOM to be valid.
II. Conclusion of contract1. Offers by ELCOM, unless otherwise specified in writing, are subject
to change and non-binding.2. The customer's order is binding for 14 days. The contract is con-
cluded once ELCOM has confirmed acceptance in writing within that period or makes the delivery.
3. ELCOM retains ownership and copyright on all documentation provided to the customer in the context of the offer and order place-ment, such as calculations, drawings, etc. These documents may not be disclosed to third parties unless ELCOM has given the customer explicit written permission to do so.
4. The installation and commissioning of our products always assumes the qualified expertise of an electrician. The customer is undertakes to sell our products exclusively to specialised tradesmen/installers.
III. Prices1. ELCOM prices are considered ex factory (pursuant to INCOTERMS
2000), including VAT in the legally applicable amount.2. Orders valued 250 Euros or more shall be delivered without freight
charges. Orders valued 500 Euros or more shall be delivered without freight or packaging charges.
3. If salary, material or shared costs should rise before the day of delivery, ELCOM is entitled to adjust the prices accordingly.
IV. Delivery times1. The delivery time specified by ELCOM is non-binding unless other-
wise agreed in writing. If a binding delivery time has been agreed upon, the agreed delivery time shall be extended accordingly in case of unforeseen, extraordinary and unavoidable events, particularly in case of strikes of any kind or if deliveries to us are delayed, even if these events only occur during an existing delay.
2. Also, in case of a binding delivery time, ELCOM is entitled to exercise partial delivery and early deliveries.
3. In the case of a delivery delay that is ELCOM's responsibility, the customer is obligated to provide ELCOM with a reasonable grace period. If the customer sets ELCOM a grace period appropriate to the circumstances in the case of a delivery delay, and ELCOM fails to meet this grace period for reasons that are ELCOM's responsibility, the customer is entitled to withdraw from the contract in writing; damage claims will be due only in the case of deliberate damage or gross negligence.
4. Otherwise, the liability for damage compensation is limited to the value of the delivery.
V. Delivery/transfer of risk1. Delivered items, even if they exhibit significant defects, must be
accepted by the customer without prejudice to warranty rights. According to §377 HGB, defects must be claimed within 6 working days. This claim must be made to ELCOM in writing. The receipt of the claim by ELCOM is the determining factor for compliance with the notification period. The customer must demonstrate compliance with the defect notification period; partial deliveries are permitted. Risk is transferred from the ELCOM Flein or Friedensdorf plant (according to INCOTERMS 2000) to the customer when free delivery has been acknowledged. Upon the customer's request, the delivery may be insured at customer's cost against theft, breakage, transport, fire and water damage.
2. If the customer culpably violates his or her contractual support obligations or if acceptance is delayed, the risk of accidental de-struction or accidental degradation of the object of the agreement is transferred to the customer at the time he or she has delayed acceptance.
3. Transport and all other packaging shall only be accepted if returned free of freight charges to ELCOM's Flein or Friedersdorf plants.
VI. Delay in acceptance1. In the case of a default of acceptance by the customer, in the case
that cost increases arise – for whatever reason, particularly due to tariff accords that apply to the product – ELCOM is entitled to adapt the originally agreed-upon price to these new conditions.
2. The customer shall bear all costs incurred by ELCOM as a result of default of acceptance, including any resulting damage claims against ELCOM.
VII. Payment1. ELCOM invoices are payable within 10 days at a 3% discount or
within 30 days from the billing date with no deductions and exempt from charges. After this period has expired, the customer is in payment delay, with no additional notice required. During the delay period, the customer must pay interested on the amount owed at a rate of 8% over the base interest rate. The right to demonstrate higher damages from delay and require compensation is reserved. Any discount shall apply only to the net value of the goods, not to freight or packaging.
2. The customer shall have rights of set-off only if his or her counterclaims are legally established, remain uncontested or are acknowledged by ELCOM. The customer may only exercise a right to withhold payment if the counterclaim stems from the same contractual relationship.
3. If the customer fails to comply with payment deadlines, or if circumstances are known that reduce the creditworthiness of the customer, ELCOM retains the right to make deliveries only against payment in advance and/or to require a security payment.
with priority over the remaining payment.5. If a justified prima facie interest is established, the customer must
provide ELCOM with all information required to exercise ELCOM's rights against the customer, and must provide all required docu-mentation. Until retracted, the customer is authorised to collect the transferred proceeds of the resale. If there is an important reason for the customer to be unable to pay, especially including delay in payment, failure to pay, commencement of an insolvency process of any nature, act of protest of a bill or if comparably justified reasons exist, ELCOM is entitled to withdraw authorisation of the customer to demand payment. Moreover, after prior threat to disclose the as-signment for security and/or recovery of the transferred obligations, and after a reasonable period, ELCOM can disclose assignments for security, recover the transferred obligations, or require disclosure of assignments for security made by the customer against their own customers.
6. The customer is entitled to process or reshape the retained goods, combine them with other objects and/or mix them inseparably. The processing, reforming, combination or mixture shall be done for ELCOM. The customer shall treat the objects with all due care. The processed, reshaped, combined or mixed object shall be considered retained goods.
7. In the case of processing, reshaping, combination or mixture with other objects not belonging to ELCOM, ELCOM shall receive partial ownership of the new object in the proportion of the share resulting from the ratio of the value of the processed, reshaped, combined or mixed retained goods to the value of the remaining processed goods at the time of processing, reshaping, combination or mixture. If the customer receives general ownership of the object, ELCOM and the customer hereby agree that the customer transfers to ELCOM part ownership to the new object resulting from the processing, reshaping, combination or mixture in the ratio of the proportion of the share resulting from the ratio of the value of the processed, reshaped, combined or mixed retained goods to the value of the remaining processed goods at the time of processing, reshaping, combination or mixture. If the new object is resold, the customer hereby transfers to ELCOM his or her own claim from the resale against his or her own customers in security, along with all auxiliary rights, without this requiring additional specific declaration. However, this transfer applies only to the amount corresponding to the value invoiced by ELCOM for the processed, reshaped, combined or mixed retained goods. The payment share transferred to ELCOM must be satisfied with first priority. With respect to collection authorisation and the conditions of its retraction, the terms above apply.
8. If the retained goods are combined by the customer with real estate or moveable objects, the customer hereby also transfers to ELCOM any claim to payment due him or her as payment for the combina-tion as security, including all auxiliary claims, without requiring additional specific declaration, in the amount of the proportion of the value of the combined retained goods to the remainder of the combined goods, at the time of their combination.
9. In case of bailment, seizure or intervention of third parties, the customer must notify ELCOM immediately.
10. In the case of culpable violation on the part of the customer of significant obligations of the contract, and particularly in case of delay in pay-ment, ELCOM is entitled to return of the goods after notification. The customer is obligated to return the goods. The return and/or exercise of retained ownership or bailment of the supplied objects by ELCOM does not represent withdrawal from the contract, unless ELCOM specifically so states.
11. After prior notice, ELCOM is entitled to collect the retained goods and to satisfy any open claims by their sale.
XII. Place of fulfilment – legal jurisdiction – region of applicability1. The place of fulfilment and legal jurisdiction shall be Heilbronn,
Germany.2. These general terms of business apply only to companies in the
sense of §310 paragraph 1 of the BGB. ELCOM is a manufacturer; sales are exclusively on a b2b basis.
3. German law shall shall apply to the contractual relationship exclusively. Application of the UN Convention on Contracts for the International Sales of Goods (CISG) is hereby excluded.
4. Supplements, extensions, changes or the cancellation of this purchase contract require the written form to be effective. This shall also applyto the requirement of the written form.
5. Should for any reasons individual terms of these GTC prove to be invalid in whole or in part, the validity of the remaining terms shall remain unaffected. The parties to the contract shall moreover undertake in such a case to replace the ineffective or inexecutable term with an effective and executable term that corresponds as closely as possible to the business and conceptual provisions within legal limits.
VIII. Return of goods1. The return of properly delivered goods may only be carried out with
the prior written approval of ELCOM. Return shipping is at the risk and cost of the customer.
2. For undamaged goods, ELCOM shall invoice an amount of 15% of the net invoice amount for administrative costs, testing and repackaging.
3. For damaged goods or goods with a net value under 25 Euros, there will be no credit. Custom fabrication and individual components from sets are generally excluded from return and credit.
IX. Custom designs1. If custom fabrication is ordered and the customer requests changes,
any costs already incurred must be paid. If an order is cancelled, the entire value of the order less any savings due to cancellation of the order must be paid.
X. Guarantee, product liability1. The customer may not exercise any rights due to defects in an
ELCOM delivery or service if the value or suitability of the ELCOM delivery or service is only insignificantly diminished.
2. Notification of defects must be made immediately in case of obvious defects, but must be received by ELCOM no later than 6 working days after receipt of the goods at the determined location, in writ-ing or by fax, with an exact description of the defect. Notification of hidden defects must be made in writing immediately after their discovery, with an exact description. ELCOM is not obligated to honour the warranty if the customer fails to notify ELCOM in writing of obvious damage within the claim period. The customer must demonstrate that the claim has been made in writing on time.
3. ELCOM's warranty applies for a period of 2 years. If ELCOM has legally guaranteed only a shorter warranty period, this shall take precedence over the warranty period specified herein. In case of jus-tified claims ELCOM undertakes – insofar as the defect was claimed in writing within the claims period – either to correct the defect or to replace the goods, as ELCOM deems suitable. However, this only applies if the complete unit has been returned. The customer may only withdraw from the contract and/or reduce the purchase price if ELCOM has failed to correct the defect after a reasonable period. Damage compensation shall only be due in case of gross negligence or malice.
4. Insofar as ELCOM has corrected and/or replaced the defect, any reduction in the purchase price or withdrawal from the contract on the part of the customer is excluded.
5. Damage compensation claims may only be made by the customer if replacement has failed or ELCOM has unjustifiably refused replacement.
6. Any damage replacement obligation on the part of ELCOM, regard-less of legal justification, is otherwise limited to typical foreseeable damages. Insofar as ELCOM's liability is excluded or limited, this also applies to the personal liability of ELCOM's employees, work-ers, colleagues, representatives and other fulfilment staff. Insofar as ELCOM does not bear responsibility for a defect, the costs of examination of the defect shall be borne by the customer.
7. For third-party products supplied by ELCOM, ELCOM's liability is restricted to transfer of the liability claims made by ELCOM them-selves against the supplier of the third-party product.
8. Furthermore, no liability shall be accepted for damages due to unsuitable or improper use, incorrect installation and/or commis-sioning by the customer or third parties, or that cannot be traced to physical, chemical, electrochemical or electrical influences that are ELCOM's responsibility.
9. Liability due to culpable harm to life, limb or health remains unaf-fected. This also applies to the mandatory liability governed by the German Product Liability Law. Otherwise – insofar as no other terms are previously agreed upon – liability on the part of ELCOM is excluded.
10. ELCOM is liable according to legal requirements if the customer makes damage compensation claims due to mal-ice or gross negligence – including malice or gross negligence of representatives of ELCOM or its agents. ELCOM has a right in any case to proof of exoneration as specified by §831 BGB.
11. Insofar as ELCOM is not accused of malicious breach of contract, liability for damages is limited to typically foreseeable damages. Loss of profit and damage due to interruption of production shall not be compensated.
12. Insofar as ELCOM's liability is excluded or limited, this applies also for the personal liability of ELCOM's employees, workers, representatives and fulfilment staff.
XI. Extended retention of ownership1. The objects to be supplied (retained goods) remain ELCOM's
property until the fulfilment of all of ELCOM's claims against the customer proceeding from their business relationship.
2. If the value of all security rights due to ELCOM exceeds the value of all secured claims by more than 120 percent, ELCOM will release a corresponding portion of the security rights at the customer's request.
3. While ownership retention applies, the customer is not entitled to bailment or chattel mortgage, and is only entitled to sell the objects to resellers in the normal course of business and only subject to the condition that the reseller receives payment from his or her own customers or subject to the fact that ownership shall only be transferred to the customer if the customer has entirely fulfilled his or own payment obligations.
4. If the customer resells retained goods, he or she thereby transfers his or her future claims against his or her own customers from said resale, with all auxiliary rights – including any payment balance re-quests – as security, without this requiring later special declaration. If the retained goods are resold together with other objects without an individual price being agreed upon for the retained goods, the customer transfers that portion of the total payment corresponding to the price charged by ELCOM to the retained goods to ELCOM, Version 03/2010
115
Neckarsulm
Friedersdorf
Serv
ices
Contact
Your regional contact
CentralGottfried-Leibniz-Str. 1 D-74172 NeckarsulmTelefon +49 (0)7132 / 48 69-0 Telefax +49 (0)7132 / 48 69-200E-Mail: [email protected]: www.elcom.de
Sales office northDirk HuckenbeckPestinghausen 23D-27211 BassumTel.: 04249 / 96 02 64Fax: 04249 / 96 02 [email protected]
SwitzerlandESAG Kommunikations-Systeme AGGewerbehaus „ASP“Wehntalerstraße 6CH-8154 OberglattTel.: 0041 / 44 852 3939Fax: 0041 / 44 852 3949www.esag-zuerich.ch
NorwayQualitronicOdd-Jubal Andersen & CoTvetenveien 157N-0671 OsloTel.: 0047 22 / 757 460Fax: 0047 22 / 264 [email protected]
LatviaELCOM Komunikacijas SIAGanibu dambis 36LV-1005 RigaTel.: 00371 / 6750 18 08Fax: 00371 / 6750 18 [email protected]
AustriaMarkus StärzGottfried-Leibniz-Str. 1D-74172 NeckarsulmTel.: 07132 / 48 69 126Fax: 07132 / 48 69 [email protected]
Czech RepublicSBS Elektro s.r.o.obchodni oddeleniNa Spádu 2133/8CZ-400 01 Usti nad LabemTel.: 00420 / 47 520 79 40Fax: 00420 / 47 520 79 42
IndiaELCOM Door Communications (India) Pvt. Ltd.4 Thakorbhai Ind. EstateN.Highway No.8, Abrama-EastValsad – 396 001 Guj. IndiaTel.: 0091 / 2632 243 799Fax: 0091 / 2632 250 [email protected]
LuxembourgA.R.TECH Societe Anonyme19, rue Eugène RuppertL-2453 LuxembourgTel.: 00352 / 493 333Fax: 00352 / 402 [email protected]
Marco zenner s.à.r.l.4, rue de la ForêtL-8065 BertrangeTel.: 00352 / 4415 441Fax: 00352 / 4557 [email protected]
Sales office southwestAleksandar GuzinaGottfried-Leibniz-Str. 1D-74172 NeckarsulmTel.: 07132 / 48 69 104Fax: 07132 / 48 69 [email protected]
Sales office eastGünter EckelGewerbegebiet Vordere AueD-06774 MuldestauseeTel.: 03493 / 50 53 13Fax: 03493 / 55 [email protected]
Sales office west Dieter RiedelWaldweg 19aD-56593 PleckhausenTel.: 02687 / 92 82 33Fax: 02687 / 92 82 [email protected]
Sales office southWolfgang FinkenheimGlaswandstraße 8D-82377 PenzbergTel.: 08856 / 80 38 703Fax: 08856 / 80 38 [email protected]
Sales office NRWAndreas JansenHermann-Schmitz-Allee 20D-41751 ViersenTel.: 02162 / 10 29 701Fax: 02162 / 10 29 [email protected]
Sales office southeastBernd DostalStauffenbergstraße 32D-07318 SaalfeldTel.: 03671 / 672 144Fax: 03671 / 672 [email protected]
Sales office northeastLothar LürdingFichtestraße 57D-03046 CottbusTel.: 0355 / 251 62Fax: 0355 / 251 [email protected]
Sales office centralGerhard SchmoockSüdstraße 5D-99195 Erfurt-StotternheimTel.: 036204 / 520 09Fax: 036204 / 520 [email protected]
Bitterfeld Subsidiary OT FriedersdorfGewerbegebiet Vordere AueD-06774 MuldestauseeTel. +49 (0)3493 / 5053-0 Fax +49 (0)3493 / 55282e-mail: [email protected]
Inland sales organisation
Overseas sales organisation
Technische Hotline: Telefon 07132 / 4869-555 – Fax 07132 / 4869-556 – E-Mail: [email protected]
ELCOM GmbH & Co. KG
Central
Gottfried-Leibniz-Str. 1
D-74172 Neckarsulm
Tel.: +49 (0)71 32 / 48 69-0
Fax: +49 (0)71 32 / 48 69-200
e-mail: [email protected]
Bitterfeld Subsidiary
OT Friedersdorf
Gewerbegebiet Vordere Aue
D-06774 Muldestausee
Tel.: +49 (0)34 93 / 50 53-0
Fax: +49 (0)34 93 / 55 282
e-mail: [email protected]
www.elcom.de
Gen
eral
cat
alog
ue 2
010,
Mar
ch 2
010
editi
on ·
Ord
er n
o. 0
21.1
40.1
Subj
ect t
o te
chni
cal c
hang
es, e
rror
s an
d pr
intin
g er
rors
.