209, avenue Charles Despiau40370 Rion des Landes, FranceTel :
(33) 5 58 57 02 08Fax : (33) 5 58 57 02 02www.mlpc-intl.com
TECHNICAL DATA SHEET - DTDM
DTDMSulfur donor and v ulcanising agent
O N S S N O4,4'-DithiodimorpholineC8H16N2S2O2Molecular weight :
236CAS : 103-34-4EINECS : 203-103-0
DTDM is also available in masterbatch form, under the MIXLAND
brand name, offering a reduction ofindustrial hygiene problems and
different technical benefits.
PD : powder C : coated powder
The information contained in this leaflet is based on tests
carried out by our laboratories and data selected from the
literature but shall in no event be held to constituteor imply any
warranty or undertaking. No liabil ity whatsoever can be accepted
with regard to the handling, processing or use of the products
concerned, which must inall cases be employed with regard to all
relevant regulations and/or legislation in the country or countries
concerned.
Issue 4 dated June 04 MLPC International
PROPERTIES
Scorch-safe sulfur donor and vulcanising agent used as partialor
total replacement for sulfur in NR, SBR, NBR IR, IIR andEPDM. It is
generally used in combination with thiurams,thiazoles and
sulfenamides.It provides good ageing resistance and low compression
set.It is easy to disperse. Non-colouring, non-staining
andodourless. It does not bloom.
APPLICATIONS
Tyres.General rubber goods : heat resistant articles, belts,
wire andcable, hoses etc.
SAFETY & TOXICITY
For detailed information, please refer to our Material
SafetyData Sheet.
PACKAGING & STORAGE
Paper bag weight : 20 kg netStandard CP1 pallet : 500 kg
netShelf-life : 2 years in its original packagingStore in a dry and
cool place and away from directsources of heat or sunlight.
PRODUCTPurity*
(%)Melting point
(C ) mini*Specificgravity*
Naturalcolour Appearance
Oil(%) Remarks
DTDM PD/C 97.5 123-127 1.35 White Slightly dustingmaterial
1-2Non-blooming, excellent safetystorage,
non-staining,non-discolouring
* Typical values
