EI Publications catalogue 2011

EI Publications catalogue 2011

www.energypublishing.org

Environment

Health

Human and organisational factors

Process safety

Hazardous area classification

Electrical safety

Installation integrity

Offshore safety

Petroleum product storage and distribution

Aviation fuel handling

Biofuels

Fuel quality and control

Hydrocarbon management

Conference proceedings

EI Journals and magazines

Information services

Technical trainingThe EI’s technical training courses build on the wealth of technical knowledge held by the organisation and will continue to ensure that staff in the sector are working to the highest safety and competency standards. Current training courses are listed below and new topics for 2011 include filling stations, hazardous area classification and carbon capture and storage.

Courses for 2011Basic human factors awareness

26 April 2011 – London Member rate £375.005 September 2011 – London Non-member rate £475.00

This one day training course provides an essential overview of the role of human and organisational factors (HOF) in the energy sector and allied industries. The workshop will examine the environmental, organisational and job factors, and human and individual characteristics which influence behaviour at work in a way which can affect health and safety. Delegates will learn how they can improve procedures, conditions and performance in their own work place.

Human factors incident and accident investigation and analysis

27-28 April 2011 – London Member rate £750.006-7 September 2011 – London Non-member rate £850.00

This two day training workshop will focus on the analysis of incidents and accidents and will clarify the process of identifying root causes using practical examples. The workshop will provide an overview of available analysis methods and the application of these to identify the underlying management and organisational deficiencies responsible.

Corrosion management essentials

18-19 April 2011 – Aberdeen Member rate £845.0017-18 October 2011 – Aberdeen Non-member rate £945.00

This two-day workshop will describe the model process of corrosion management for the upstream oil and gas industry and is based on the Energy Institute publication Guidance for corrosion management in oil and gas production and processing. The workshop will provide practical advice for successful implementation of a corrosion management policy using practical examples of corrosion threats and mitigation methods.

Essentials of aviation fuel filtration - based on API/EI 1550

Contact training department for prices, dates or bespoke training

This one and a half day course delivers an essential guide to aviation fuel cleanliness monitoring and control. It provides critical information through practical and interactive instruction - based on the international API/EI 1550 international standards handbook.

If none of the above programmes meets your training needs or you prefer your training to take place in-house please contact us to discuss our bespoke training options.

For more information or to discuss any of your training needs please visit www.energyinst.org/training/technical-training or contact the training team on: t: +44 (0)207 467 7135 or [email protected]

www.energyinst.org

To purchase any of these titles, and for further information, visitwww.energypublishing.org

1

Con

tent

s

Technical work programme . . . . . . . . . . . . . . . . . . 2

New EI resources for 2011 . . . . . . . . . . . . . . . . . . . 3

EI technical publications . . . . . . . . . . . . . . . . . . . . . 6

Environment . . . . . . . . . . . . . . . . . . . . . . . . . 6 Air quality and emissions . . . . . . . . . . . . 6 Microbiology . . . . . . . . . . . . . . . . . . . . . 7 Decommissioning . . . . . . . . . . . . . . . . . 7 Oil spills . . . . . . . . . . . . . . . . . . . . . . . . . 7 Refinery emissions . . . . . . . . . . . . . . . . . 7

Health . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Medical . . . . . . . . . . . . . . . . . . . . . . . . . 8 Occupational health provision . . . . . . . . 9 Occupational health and hygiene . . . . . . 9 Air quality and emissions . . . . . . . . . . . . 9

Human and organisational factors . . . . . . 10

Hearts and Minds . . . . . . . . . . . . . . . . . . . . 11

Process safety . . . . . . . . . . . . . . . . . . . . . . . 12 Corrosion . . . . . . . . . . . . . . . . . . . . . . 12 Carbon capture and storage . . . . . . . . 12 Design . . . . . . . . . . . . . . . . . . . . . . . . . 12 Hydrocarbon release reduction . . . . . . 13 Management systems . . . . . . . . . . . . . 13 Process plant . . . . . . . . . . . . . . . . . . . . 14 Risk analysis . . . . . . . . . . . . . . . . . . . . . 14

Hazardous area classification. . . . . . . . . . . 14

Electrical safety. . . . . . . . . . . . . . . . . . . . . . 15

Installation integrity . . . . . . . . . . . . . . . . . 16

Offshore safety . . . . . . . . . . . . . . . . . . . . . . 17

Petroleum product storage and distribution . . . . . . . . . . . . . . . . . . . . . . . . . 18 Distribution installations . . . . . . . . . . . 18 Vapour recovery . . . . . . . . . . . . . . . . . 19 Road tanker operations . . . . . . . . . . . . 19 Filling stations . . . . . . . . . . . . . . . . . . . 20

Aviation fuel handling . . . . . . . . . . . . . . . . 22 Fuel filtration . . . . . . . . . . . . . . . . . . . . 22 General . . . . . . . . . . . . . . . . . . . . . . . . 22

Biofuels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Fuel quality and control . . . . . . . . . . . . . . . 24 IP Test methods . . . . . . . . . . . . . . . . . . 24 Aviation fuel quality . . . . . . . . . . . . . . . 25 Laboratory health and safety . . . . . . . . 25 Laboratory correlation schemes . . . . . . 25

Hydrocarbon management . . . . . . . . . . . . 26

Conference proceedings. . . . . . . . . . . . . . . . . . . . 28 EI Conference proceedings . . . . . . . . . . . . . . 28 WPC Congress Proceedings . . . . . . . . . . . . . . 28 North Sea Flow Measurement Workshop Proceedings . . . . . . . . . . . . . . . . . . . . . 28 Tekna Conference Proceedings . . . . . . . . . . . 28

EI Publishing Partnerships . . . . . . . . . . . . . . . . . . 28 Modern petroleum technology . . . . . . . . . . . 28 Centre for Global Energy Studies . . . . . . . . . 28 Institution of Gas Engineers and Managers . . . . . . . . . 28 Chartered Institution of Building Services Engineers . . . . . . . . . . . . . . . . . . . . . . 29 Croner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Transport fuels technology . . . . . . . . . . . . . . . 29

EI Journals and magazines . . . . . . . . . . . . . . . . . . 30 Petroleum Review . . . . . . . . . . . . . . . . . . . . . 30 Energy World . . . . . . . . . . . . . . . . . . . . . . . . . 30 EI magazine supplements . . . . . . . . . . . . . . . . 30 The Journal of the Energy Institute . . . . . . . . . 30 Fuel and Energy Abstracts . . . . . . . . . . . . . . . 30 The Energy Institute Yearbook and Directory 2011 . . . . . . . . . . . . . . . . . . 30

EI Library and information service (LIS) . . . . . . . 31 EI Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

How to order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Welcome to the 2011 edition of the Energy Institute (EI) Publications catalogue . Regular users of this catalogue will have already noticed some changes to this document - not just size alone . New sections, including a New EI resources section and an index of EI technical publications, are now included . EI technical publications have also been restructured to assist users in finding titles relevant to their specialist areas of work quickly and easily . These changes to the categories are in anticipation of an upgraded EI publishing website, www.energypublishing.org, due to launch mid-2011 and more importantly, are a reflection the expanding portfolio of the EI Technical work programme (see page 2 for more information) .

The EI’s mission is to develop good practice and professionalism . Its purpose is to promote the safe, environmentally responsible and efficient supply and use of energy in all its forms and applications . The EI works to accomplish this through the services provided to individuals and organisations in membership, to the benefit of society as a whole . The EI is a registered charity and proceeds from the sales of publications are used to support the important work we undertake, for the benefit of our members and the industry at large .

Contents


2

Tech

nica

l wor

k pr

ogra

mm

e Technical work programmeThe EI Technical programme aims to provide industry with cost effective, value-adding knowledge on key current and future issues within the energy sector.

This is the statement that sits above all official documents of the EI’s Scientific and Technical Advisory Committee (STAC) - the body with responsibility for setting and steering the EI Technical Programme - and encapsulates well the purpose that underpins the activities of the EI as a whole in delivering good practice for the global energy industry .

The EI delivers this good practice through guidance documents and technical reports (as listed throughout this catalogue), workshops and by facilitating technical discussion between different sectors of industry, including regulators .

The technical committees are organised into six themed areas - health, safety, environment, distribution and marketing, test methods, and hydrocarbon management, with the overall programme managed and steered by STAC . Importantly, the technical work of the EI is funded by, and developed in association with, the EI partners . Additional support is also provided by a diverse range of organisations, including industry regulators such as the UK Health and Safety Executive, Environment Agency, Maritime and Coastguard Agency, and other bodies such as the Global CCS Institute . Work is also often undertaken in partnership with trade associations such as the Carbon Capture and Storage Association, UKPIA, and UK Oil and Gas, and with standards setting bodies such as ASTM, BSI, CEN, API and ISO .

Where the EI adds value

In the UK (and many other countries) there is a ‘goal setting’ rather than ‘prescriptive’ approach to regulation . This is particularly relevant in relation to health, safety and environmental (HS&E) legislation . Here, the onus is on operators to demonstrate to the regulators’ satisfaction that reasonable steps have been taken to fulfil the requirements of regulations . This demonstration is easier when the industry and regulators have agreed good practices or guidance . It is this which underpins the ethos of the EI’s role for industry, with the Institute essentially acting as an honest broker to facilitate discussion on scientific and technical issues, inputting sound science into regulations, or delivering good practice in partnership to support regulators and industry alike . The position of the EI as an independent and respected technical authority is as important now as it has ever been in helping the energy sector to meet its obligations and in supporting day-to-day industry operations .

The guidance in this catalogue would not be delivered without the generousity of the many who give up their time in supporting the EI through its Technical Committees . On behalf of the EI I would like to thank all those whose support make the EI technical work programme possible

Martin Maeso

Technical Director, Energy Institute

Current EI partners include:

BG GroupBPCentricaChevronConocoPhillipsEDF ENIE .ONExxonMobilKuwait Petroleum MaerskMurcoNexenPremier OilRWE npowerSaudi AramcoShellStatoilTalismanTotal


3

New

EI r

esou

rces

New EI resources High level framework for process safety managementProvides a common understanding of requirements for all levels in the organisation and provides a consistent basis for discussion with the regulator .Further information on process safety management can be found here: http://www .energyinst .org/PSM-framework1st ed Dec 2010 ISBN 978-0-85293-584-2 £15.00

Research report: Human factors performance indicators for the energy and related process industries This report sets out the current thinking on safety PIs and the processes used to ensure appropriate indicators are selected . It proceeds to describe how human factors are monitored within industry using the findings from a literature appraisal, a joint industry workshop, and direct consultation with users of PIs . 1st ed Dec 2010 ISBN 978-0-85293-587-3 £15.00

Research report: Viability of using direct toxicity assessment for petroleum refinery effluent toxicity assessment The project comprised of two main components:• A desk-based review of the petroleum refining sector and, • A pilot study undertaking DTA testing on three effluent outfalls selected from two

petroleum refineries . This research report summarises this project and investigates the viability of using DTA for the UK petroleum refinery sector .1st ed Nov 2010 ISBN 978-0-85293-582-8 £51.00

Research report: Hazard and risk assessment for bulk liquefied petroleum gas storage events This publication provides guidance on hazard and risk assessment for bulk liquefied petroleum gas (LPG) storage events such as fire and explosion . It is applicable to installations at petroleum refineries, import and distribution terminals, depots and large industrial customer installations where the storage capacity exceeds the top tier threshold of the UK Control of Major Accident Hazards (COMAH) Regulations . 1st ed Nov 2010 ISBN 978-0-85293-563-7 £73.00

A recommended fitness standard for the oil and gas industryThis publication provides an introduction to fitness standards and makes recommendations for minimum fitness standards for people who work in the oil and gas industry . Minimum standards have been evaluated for common critical tasks with a significant physical fitness component e .g . valve turning and ladder climbing . The evidence base for these standards is contained within this publication as well as guidance on administering the tests .1st ed Oct 2010 ISBN 978-0-85293-562-0 £153.00

EI HM 56/API MPMS Technical report 2570 Continuous on-line measurement of water content in petroleum (crude oil and condensate) This technical report provides guidance for the application, installation, operation, verification, and proving of OWDs for use in the non-custody transfer measurement of water in crude oil and condensate . 1st ed Oct 2010 ISBN 978-0-85293-585-9 £46.00

HM 80. Model terms and conditions for free on board (FOB) sale and purchase of crude oilThe GTC (General Terms and Conditions) Hydrocarbon Trading Committee was established with the purpose of developing and maintaining voluntary standard GTCs for hydrocarbon physical trades on behalf of the wider trading community .1st ed Oct 2010 ISBN 978-0-85293-510-1 £92.00

Technical guidance on hazard analysis for onshore carbon capture and storage installations and pipelinesThis document sets out the methodology for implementing appropriate hazard analysis for carbon dioxide related hazards on onshore carbon capture installations )and pipelines . The document includes:• Hazard and risk analysis for carbon dioxide systems onshore .• Failure frequency data sources for carbon dioxide .• Detailed guidance on using currently available commercial dispersion models for carbon dioxide .• Fatal area predictions using SLOT/SLOD data and dispersion modelling .• Gaps and uncertainties in carbon dioxide hazard analysis .Available for free download from www .energypublishing .org1st ed Sep 2010 ISBN 978-0-85293-541-5 £41.00

Good plant design and operation for onshore carbon capture installations and onshore pipelinesOverview of CCS technology including new plant equipment and what is currently in use within the CCS or other industries . Includes:• In depth guide to carbon dioxide to broaden the readers understanding of the material

and its health and safety issues .

High level framework for process safety management

Registered Charity Number 1097899

Good plant design and operation for onshore carbon capture installations and onshore pipelines

A recommended fitness standard for the oil and gas industry



4

Guidelines for offshore oil and gas installations that are not permanently attended

New

EI r

esou

rces

• Key design features of plant and pipelines for carbon dioxide service including experience gained from the industrial gases sector .

• Key operational information for plant and pipelines for carbon dioxide service including experience gained from the industrial gases sector to ensure that your operating practices take into account the latest operational experiences from carbon dioxide plant .

Available for free download at www .energypublishing .org1st ed Sep 2010 ISBN 978-0-85293-540-8 £41.00

Guidance on health surveillanceThe purpose of the publication is to provide occupational health professionals with an approach to health surveillance in order to maintain the health of personnel, and in doing so to meet legal and other requirements . A health surveillance programme comprises a systematic set of procedures designed to detect the early signs of work-related health changes that could indicate permanent damage to the individual’s wellbeing . This programme may include specific medical surveillance by health professionals, which in itself may include clinical examinations or biological monitoring to measure and assess uptake or the effects of exposure to certain environments .1st ed Jul 2010 ISBN 978-0-85293-556-9 £20.00

Protocol for the estimation of petroleum refinery process plant fugitive VOC emissionsThis publication lists methods for the estimation of fugitive emission leak rates (kg/h) and provides a protocol for converting these leak rates into annual estimates of refinery process plant fugitive VOC emissions . The protocol takes into account the impact of potential reductions in average emission rates resulting from LDAR programmes .2nd ed Jul 2010 ISBN 978-0-85293-557-6 £71.00

Code of safe practice for contractors and retailers managing contractors working on filling stationsThis code of safe practice is essential reading for all companies or individuals who are contracted to carry out work on filling stations . It will assist contractors, sub-contractors and self-employed persons who are required to work on a filling station, to understand the inherent dangers and precautions necessary in such work, therefore enabling them to assess the risks involved to themselves, to their employees and to others who may be affected by this work, such as the site operator or retailer and their staff, other contractors, customers, the general public and property owners in the vicinity .1st ed Jul 2010 ISBN 978–0–85293–580–4 £92.00

Model code of Safe Practice Part 1: The selection, installation, inspection, and maintenance of electrical and non electrical apparatus in hazardous areasThis model code is essential reading for all those involved in the manufacture, supply, and management of certified Ex equipment used in hazardous areas . It provides up to date guidance on the selection, installation, inspection and maintenance of explosion protected Ex electrical and non-electrical apparatus, primarily used in both the onshore and offshore petroleum industry . 8th ed Jun 2010 ISBN 978–0–85293–558–3 £143.00

Guidelines for offshore oil and gas installations that are not permanently attendedThe document provides all those involved in the design and operation of NPAIs with guidance on how to optimise the commercial aspects of operating, whilst maintaining safe and environmentally acceptable practice through encouraging the use of risk based decision making and through provision of knowledge and experience . All stages of the NPAI lifecycle are covered .1st ed Jun 2010 ISBN 978-0-85293-564-4 £135.00

Guidance on the declassification of tanks previously in leaded gasoline serviceThe publication sets out a test protocol for evaluating exposure to lead resulting from previous contamination from organic lead gasoline additives . It sets out procedures for the declassification of gasoline storage tanks used in the refining and distribution sectors which were formerly in leaded gasoline service . The tests include a visual examination, analysis of samples of scale for organic and inorganic lead, and taking of air samples during worst-case simulated hot work carried out inside the storage tank on sections of the tank wall . If the test results are satisfactory, the tank may be ‘declassified’ . 2nd ed May 2010 ISBN 978-0-85293-560-6 £73.00

Petroleum road tanker design and constructionProvides comprehensive recommendations for the design and construction of complete road tankers for the conveyance of petrol, kerosene, diesel and gas oil . Certain recommendations may also be applicable to other petroleum products . Specific recommendations are given concerning the precautions that should be taken for road tankers intended for the carriage of aviation fuels, aviation gasoline (AvGas) and aviation turbine fuel (AvTur) . The scope of this publication also covers certain aspects for the transport of denatured ethanol .3rd ed Apr 2010 ISBN 978-0-85293-554-5 £143.00

Guidance on managing human and organisational factors in decommissioning This guidance aims to steer the user through the types of human factors considerations that should be taken into account during the various phases of decommissioning a facility . The example given is of a nuclear power plant; however, whilst the decommissioning phases, activities and terminology used are nuclear specific, most are also relevant across wider energy industry sectors .1st ed Mar 2010 ISBN 978-0-85293-555-2 £20.00

Model code of safe practice

Part 1

The selection, installation, inspection, and maintenance of electrical and non electrical apparatus in hazardous areas

8th Edition


Petroleum road tanker design and construction


3rd edition


5

Workforce involvement is a way for everyone to have the opportunity to help improve health and safety.

‘Workforce involvement' (or WFI) is generally used to describe the ways in which all workers (including contractors) are encouraged to take part in the decision making process for managing health and safety at work.

There are no set rules for how this may happen, and different organisations can use a range of methods to engage everyone in health and safety discussions. However, success can only be achieved through active participation.

If you would like to comment on a safety issue, your local safety leader is:

What is workforceinvolvement?

To �nd out more about how WFI strategies can improve safety and contribute to a better working

environment, visit www.energyinst.org/w�

New

EI r

esou

rces

CFR installation and operation: Health and safety guidelinesThis publication aims to provide guidance on how to comply withspecific health, safety, maintenance and environmental requirements within the CFR installation and operating environment . Comprehensive information is provided starting from initial requirements to consider when deciding where to locate a CFR facility through to the mitigation of hazards when operating or maintaining a CFR engine for testing of fuels .1st ed Mar 2010 ISBN 978-0-85293-551-4 £71.00

Technical workshop proceedings: Initial report – Framework for high-level process safety managementThis publication provides a non-verbatim summary of the presentations and discussions from a technical workshop held on 15 July 2009 . This publication was used to focus work towards High level framework for process safety management .1st ed Mar 2010 ISBN 978-0-85293-553-8 £15.00

External corrosion awareness handbook: A guide for visual recognition of external integrity threats to upstream oil and gas production plantThis is an essential handbook for all process support personnel tasked with the day to day management and fabric maintenance . The areas of external corrosion covered include examples of structures, process and electrical equipment . Also included are those from corrosion under insulation and stainless steels mechanisms . As fatigue failure is also seen as a significant threat, the opportunity has been taken to include examples of vibration fatigue and fretting .1st ed Feb 2010 ISBN 978-0-85293-548-4 A5 £41.001st ed Feb 2010 ISBN 978-0-85293-548-4 A6 £37.00

Guidance on development, implementation and improvement of quality systems in petroleum laboratoriesThis publication aims to provide a practical guide for those establishing a quality system in their laboratory, or to provide them with a means of ensuring that the quality system they have in place meets well established quality standards . It has been produced to enable a wide range of laboratory personnel to appreciate the requirements of a robust quality system without needing to have expert knowledge .1st ed Jan 2010 ISBN 978-0-85293-552-1 £71.00

Protocol for the estimation of VOC emissions from petroleum refineries and gasoline marketing operationsThe protocol provides methods for the estimation of annual emissions of non-methane volatile organic compounds (NMVOCs) from potential sources in refineries and gasoline marketing facilities . The aims are to aid industry compliance with existing legislative reporting requirements and to allow consistency in emission estimation methodologies .2nd ed Jan 2010 ISBN 978-0-85293-549-1 £71.00

EI 1583 Laboratory tests and minimum performance levels for aviation fuel filter monitorsProvides minimum recommendations for: selected aspects of filter monitor system and element performance; the general mechanical specifications for new filter monitor elements; laboratory tests and minimum performance requirements for the qualification of new filter monitor elements, and requalification and similarity requirements . It includes categories of filter monitor elements that have not been included in earlier editions of 1583 .6th ed Jan 2010 ISBN 978–0–85293–527–9 £72.00

Coming soon in 2011:IP Standard Methods for analysis and testing of petroleum and related products, and British Standard 2000 Parts, 201169th ed

Wokforce involvment poster pack1st ed

Guidelines for JFTOT tubes visual rating1st ed

Flexible hose management guidelines2nd ed

Human factors briefing notes2nd ed

Guidance on managing human factors safety critical task analysis1st ed

Design, construction, modification, maintenance and decommissioning of filling stations3rd ed

Pocket guide to safety for personnel working on oil installations2nd ed

External corrosion threats handbookA guide for visual recognition of external integrity

threats to upstream oil and gas production plant


6

Envi

ronm

ent

Air quality and emissionsIntroductory guide to environmental damageIn March 2009, the requirements of the Environmental Liabilities Directive were implemented in England as the Environmental Damage (Prevention and Remediation) Regulations . Regulations for other nations quickly followed . This guide introduces the concept of ‘Environmental Damage’ in the context of the new regulations and explains what this means to site operators . Free online at www .energypublishing .org1st ed Nov 2009 ISBN 978-0-85293-544-6 £15.00

Reported and potential occurrence of ether oxygenates on water resources in the UKFollow up to A review of current MTBE usage and occurrence in groundwater in England available from the Environment Agency . It compares the recent findings to those of the original study and also includes a comparison of MTBE in the US .1st ed Jul 2009 ISBN 978-0-85293-515-6 £73.00

Environmental risk assessment of bulk liquids storage facilities: A screening toolA new screening tool for assessing the likely risk to the environment of an unplanned release of liquids from above ground bulk storage tanks . It supports the requirements of the European Integrated Pollution Prevention and Control (IPPC) legislation . The screening also includes an assessment of tertiary containment, consistent with UK COMAH requirements . Free of charge via the EI website: www .energyinst .org/envrisktool1st ed Jun 2009 ISBN 978–0–85293–393–0

Sustainable urban drainage systems at oil installationsSustainable drainage systems (SUDS) provide a means to improve the quantity, quality and aesthetic appeal of water that flows from developed areas into rivers and streams . This report provides information on the general principles of SUDs and the range of options available . This information may be used by site operators as a reference tool when considering the applicability and benefits of various SUDS techniques at petroleum installations . Free online at www .energypublishing .org1st ed Apr 2009 ISBN 978–0–85293–439–5

EI literature review: Biofuels–potential risks to UK water resourcesThis report presents available and relevant information on road transport biofuels and makes conclusions regarding their potential risks to groundwater in the UK . The report, co-funded by the Environment Agency, focuses on the biofuels that are commercially important today and those that could be in the foreseeable future .1st ed Aug 2008 ISBN 978-0-85293-519-4 £47.00

Environmental guidelines for petroleum distribution installationsProduced in association with the Environmental Agency for England and Wales (EA), and the Scottish Environmental

Protection Agency (SEPA), these guidelines can be used as a basis for managing the environmental impact of refinery off-sites, LPG, bitumen, aviation, authorised distributors and lubricant operations .2nd ed Apr 2007 ISBN 978–0–85293–440–1 £94.00

First report of the UK National Expert Group on Transboundary Air Pollution (NEGTAP)1st ed Nov 2002 ISBN 978–0–85293–377–0 £28.00

Review of COMEAP and IOM Reports on long term effects of particles1st ed Nov 2002 ISBN 978–0–85293–379–4

UK National Air Quality Strategy (NAQS) guidance for the evaluation of stage 3 reviews and an assessment of their potential effects on key industry installations1st ed Nov 2002 ISBN 978–0–85293–378–7 £45.00

Guidelines for soil, groundwater and surface water protection and vapour emission control at petrol filling stations1st ed Jun 2002 ISBN 978–0–85293–358–9 £21.00

VOC emission control and its costs in the petrochemical sector. Impact of the ‘Gothenburg’ Protocol and National Emissions Ceilings Directive1st ed May 2001 ISBN 978–0–85293–338–1 £40.00

Transboundary air pollution acidification, eutrophication and ground level ozone in the UK. Draft report of the National Expert Group on Transboundary Air Pollution – March 2001. Response of the Institute of Petroleum1st ed May 2001 ISBN 978–0–85293–340–4 £23.00

Expert Panel on Air Quality Standards (EPAQS) discussion document on airborne particles: what is the appropriate measure on which to base a standardAvailable free online at: www .energypublishing .org1st ed Jul 2000 ISBN 978–0–85293–304–6 £18.00

Guidance document on risk assessment for the water environment at operational fuel storage and dispensing facilities1st ed Dec 1999 ISBN 978–0–85293–256–8 £98.00

Guidelines for investigation and remediation of petroleum retail sites1st ed Nov 1998 ISBN 978–0–85293–216–2 £98.00

Environmental investigation and assessment1st ed 1993 (reprinted 1996) ISBN 978–0–85293–124–0 £98.00

EnvironmentThe EI Environment Management Group (EMG) is concerned with conducting or sponsoring cost-effective scientific and technical work related to the impact the oil industry has on the environment . In particular it aims to provide scientific data on which the industry can base its stance on environmental issues; develop codes and protocols to promote good environmental practice; and promote discussion and facilitate understanding of technical issues facing the industry .

The technical work is managed through a series of work groups, including groups addressing issues such as oil spills, microbial spoilage, soil, waste and groundwater issues, emissions reduction and air quality . Much of the research is carried out in partnership with other relevant and interested organisations, in particular the Environment Agency (EA), as well as the Scottish Environment Protection Agency (SEPA), and the Maritime Coastguard Agency .


7

Envi

ronm

ent

MicrobiologyFluorescence In Situ Hybridisation (FISH) as a routine tool to monitor bacterial populations in oilfield systemsThis report aims to advance oil field microbiology monitoring by demonstrating whether the FISH technique is suitable for oilfield sample in the laboratory and in the field .1st ed Nov 2009 ISBN 978-0-85293-546-0 £49.00

Model code of safe practice Part 16: Tank cleaning safety codeProvides guidance on safety, health and environmental protection risk assessment and management for tank cleaning operations . Major changes to the second edition include: additional guidance on environmental protection, fire and explosive hazards and health risk assessment, an increased focus on planning and executing tank cleaning operations, guidance on principles of equipment selection, and pertinent control measures for cleaning techniques .3rd ed Jul 2008 ISBN 978–0–85293–436–4 £127.00

Guidelines for the investigation of the microbial content of petroleum fuels and for the implementation of avoidance and remedial strategiesThese guidelines complement the CD Rom training tool – Microbes in fuels . The issues covered include microbial ecology, the problems caused by micro–organisms, monitoring microbiological contamination, and avoidance and remediation . Appendices cover on–site testing and provide examples of tank sampling data sheets .2nd ed Jul 2008 ISBN 978–0–85293–524-8 £66.00

EI literature review: Implications of biofuels on microbial spoilage and corrosion within the fuel distribution chain and end useThis is a review of the current knowledge base, including technical research and operator experience identifying the existing and potential impact of microbiologically related problems in fuel distribution, storage, supply and use associated with a more widespread use of biofuels .1st ed May 2008 ISBN 978-0-85293-514-9 £58.00

The effect of nitrate anti–souring treatment on corrosion of mild steelAn increasing number of operators are using nitrate to combat reservoir souring and suppress SRB activity . The biological anti–souring treatment is environmentally friendly for offshore applications and can be comparatively inexpensive . However, concerns have been raised regarding the effect of the treatment and its by–products on the corrosion of mild steel . Of particular concern is the intermittent generation of low concentrations of nitrite . This independent study was commissioned by the Microbiology Committee of the EI and was a part of the Committee’s leading role in promoting good practices, greener alternatives and improved understanding of industrial microbiology .1st ed Nov 2006 ISBN 978–0–85293–458–6 £66.00

Guidelines: Microbes in fuel – CD-ROM training toolThis CD Rom provides an invaluable training tool for following recommended procedures for the testing of fuels for microbial content and the interpretation of results . Guidance is given on steps which can be taken to avoid microbial problems and there are suggestions for remedial action .1st ed July 2006 ISBN 978–0–85293–447–0 £154.00 + VAT

The stimulation of Nitrate Reducing Bacteria (NRB) in oilfield systems to control Sulfate Reducing Bacteria (SRB) activity, Microbiologically Influenced Corrosion (MIC) and reservoir souring: an introductory view1st ed Aug 2003 ISBN 978-0-85293-394-7 £62.00

Microbially–influenced corrosion (MIC) in double-hull tankers. A scoping paper1st ed Mar 2001 ISBN 978–0–85293–333–6 £49.00

Code of practice for metalworking fluids4th ed Nov 2000 ISBN 978–0–85293–310–7 £70.00

DecommissioningGuidelines for the calculation of estimates of energy use and gaseous emissions in the decommissioning of offshore structures1st ed Feb 2000 ISBN 978–0–85293–255–1 £98.00

Oil spillsUK coastal and marine resource atlas reportThis project has delivered a digital database UK marine and coastal resource atlas, available on the Defra MAGIC website: www .magic .gov .uk The final report defines the objectives behind the project, outlines the two-phase process by which the atlas was constructed, and describes its constituent datasets and method of dissemination . It identifies how the resource will be maintained and summarises problems that were encountered during course of the project . Recommendations, based on project experiences, are put forward . The report is available free online at www .energypublishing .org .1st ed Aug 2006

Inland waters oil spill response: a guidance document incorporating the strategies and techniques for responding to inland surface water oil spills in the UK1st ed Apr 2004 ISBN 978–0–85293–385–5 £115.00

Operational guidelines on the use of oil spill dispersants at sea1st ed Feb 2004 ISBN 978–0–85293–384–8 £53.00

Booming in oil spill contingency planning. A guidance document for developing operational coastal estuarine booming plans in the United Kingdom1st ed Jun 2002 ISBN 978–0–85293–355–8 £93.00

Planning for the use of oil spill dispersants3rd ed May 2001 ISBN 978–0–85293–316–9 £95.00

Refinery emissionsResearch report: Viability of using direct toxicity assessment for petroleum refinery effluent toxicity assessment The project comprised of two main components:• A desk-based review of the petroleum refining sector and, • A pilot study undertaking DTA testing on three effluent

outfalls selected from two petroleum refineries . This research report summarises this project and investigates the viability of using DTA for the UK petroleum refinery sector .1st ed Nov 2010 ISBN 978-0-85293-582-8 £51.00

Protocol for the estimation of petroleum refinery process plant fugitive VOC emissionsThis publication lists methods for the estimation of fugitive emission leak rates (kg/h) and provides a protocol for converting these leak rates into annual estimates of refinery process plant fugitive VOC emissions . The protocol takes into account the impact of potential reductions in average emission rates resulting from LDAR programmes .2nd ed Jul 2010 ISBN 978-0-85293-557-6 £71.00

Protocol for the estimation of VOC emissions from petroleum refineries and gasoline marketing operationsThe protocol provides methods for the estimation of annual emissions of non-methane volatile organic compounds (NMVOCs) from potential sources in refineries and gasoline marketing facilities . The aims are to aid industry compliance with existing legislative reporting requirements and to allow consistency in emission estimation methodologies .2nd ed Jan 2010 ISBN 978-0-85293-549-1 £71.00


8

Hea

lth

Research report: Ambient monitoring of benzo-a-pyrene (B[a]P) emissions at two oil refineriesThis report describes work undertaken by the National Physical Laboratory for the Energy Institute’s Air Emissions Group, to monitor boundary-fence concentrations of particulate phase benzo-[a]-pyrene (B[a]P) at two oil refineries in the UK . This publication can be viewed free online at www .energypublishing .org1st ed Jul 2008 ISBN 978-0-85293-506-4 £10.00

Research report: Non CO2 greenhouse gas emissions from oil refineriesTraditionally, actions to reduce emissions of greenhouse gases (GHGs) from oil refineries have focused on carbon dioxide (CO2) . This research report reviews the sources and magnitude of emissions of the other five greenhouse gases listed in the Kyoto Protocol – methane, nitrous oxide, hydrofluorocarbons, perfluorocarbons and sulfur hexafluoride – within the UK refining sector .1st ed Jul 2006 ISBN 978–0–85293–459–3 £69.00

Protocol for the determination of the speciation of hydrocarbon emissions from oil refineries1st ed May 2004 ISBN 978–0–85293–405–0 £87.00

Research report: Speciation of VOC Emissions from UK Oil Refineries1st ed Feb 2002Part 1 presents an overview of the work carried out and of the results obtained .ISBN 978–0–85293–345–9 £28.00

Part 2 presents the findings of the literature survey, the objective of which was to identify existing species data entry for refinery VOC emissions .ISBN 978–0–85293–346–6 £28.00Part 3 describes the detailed results of the measurements carried out at the nine UK refineries .ISBN 978–0–85293–347–3 £55.00Order the complete set £82.00

UK oil refining and the atmospheric emission of dioxins. A briefing paper1st ed Mar 2005 ISBN 978–0–85293–429–6 £57.00

Please order the following titles from the Environment Agency www .environment–agency .gov .uk

Laboratory to field scale relationships in the assessment of the potential for monitored natural attenuation of contaminants in groundwater1st ed 2003 ISBN 978–1–85705–701–0

The effects of contamination concentration on the potential for natural attenuation1st ed 2002 ISBN 978–1–85705–599–3

Vapour transfer of soil contaminants. R and D technical report P5–018/TR1st ed 2002 ISBN 978–1–85705–151–3

A review of current MTBE usage and occurrence in groundwater in England1st ed 2000 ISBN 978–1–85705–399–9

HealthThe Health Technical Committee (HTC) is responsible for advising industry and EI committees on all health issues relevant to the international oil and gas and wider energy sector, including the health aspects of employees, customers and the general public who may be impacted by the activities and products of the industry .

Membership of HTC is formed from a range of oil and gas and power generation companies, the Health and Safety Executive and other associations such as the British Occupational Health Research Foundation and Oil and Gas UK . HTC members are generally registered medical practitioners, certified occupational hygienists, or senior medical professionals within their organisation .

Key areas of current and recent interest include functional capacity evaluation of the workforce, emergency response team fitness requirements, health surveillance guidance pandemic flu and contingency planning, epidemiological study on effects of exposure to benzene, legionellosis risk management and occupational illness reporting .

MedicalA recommended fitness standard for the oil and gas industryThis publication provides an introduction to fitness standards and makes recommendations for minimum fitness standards for people who work in the oil and gas industry . Minimum standards have been evaluated for common critical tasks with a significant physical fitness component e .g . valve turning and ladder climbing . The evidence base for these standards is contained within this publication as well as guidance on administering the tests .1st ed Oct 2010 ISBN 978-0-85293-562-0 £153.00

Guidance on health surveillanceThe purpose of the publication is to provide occupational health professionals with an approach to health surveillance in order to maintain the health of personnel, and in doing so to meet legal and other requirements .

A health surveillance programme comprises a systematic set of procedures designed to detect the early signs of work-related health changes that could indicate permanent damage to the individual’s wellbeing . This programme may include specific medical surveillance by health professionals, which in itself may include clinical examinations or biological monitoring to measure and assess uptake or the effects of exposure to certain environments .1st ed Jul 2010 ISBN 978-0-85293-556-9 £20.00

Health technical information sheetsThese sheets have been produced by the EI’s Health Technical Committee (HTC) to provide guidance to industry on a number of health related issues .HTIS 1: Individual health risk assessmentsHTIS 2: Medication and workHTIS 3: Medication and work–a brief guide for managersAvailable free online at www .energypublishing .org


9

Hea

lth

Guidelines for physical capability and functionality capacity requirements for emergency response team membersProvides guidance to occupational physicians working in the international oil and gas industry, these guidelines address the fitness requirements for ERT members who have a designated role in addition to their normal duties at either onshore or offshore facilities .1st ed Dec 2009 ISBN 978-0-85293-532-3 £31.00

Mortality of United Kingdom petroleum distribution workers 1951–2003Summarises results from a major study, carried out on behalf of the EI by the University of Birmingham to determine whether mortality rates amongst petroleum distribution workers might be related to occupational exposures .2nd ed Jul 2007 ISBN 978–0–85293–477–7 £63.00

Mortality of United Kingdom petroleum refinery workers 1951–2003Summarises results from a major study, carried out on behalf of the EI by the University of Birmingham to determine whether mortality rates amongst oil refinery workers might be related to occupational exposures .2nd ed Jul 2007 ISBN 978–0–85293–478–4 £63.00

Guidance on occupational infection with blood borne viruses for health care workers in remote sites or installationsAvailable free online at: www .energypublishing .org1st ed Jan 2005 ISBN 978–0–85293–433–3

Air quality and its association with human health effects – an update1st ed Jul 2001 ISBN 978–0–85293–342–8 £42.00

A critical review of current biological monitoring techniques for the assessment of exposure to low levels of benzene1st ed Jul 2000 ISBN 978–0–85293–300–8 £51.00

Application of Control of Substances Hazardous to Health (COSHH) requirements for carcinogens at oil refineries and terminals1st ed Aug 1998 ISBN 978–0–85293–233–9 £61.00

Medical standards for fitness to wear respiratory protective equipment – information for physicians1st ed May 1997 ISBN 978–0–85293–181–3 £60.00

Implementation of pregnant workers directive management of health and safety at work (amendment) regulations 19941st ed 1996 ISBN 978–0–85293–174–5 £57.00

Major benzene study results1st ed Sep 1995 ISBN 978–0–85293–163–9 £215.00

Code of practice for the safe handling of drilling fluids1st ed 1992 ISBN 978–0–471–93461–5 £98.00

Aseptic bone necrosis in commercial divers1st ed 1990 ISBN 978-0-86017-179-9 £26.00

Occupational health provisionLooking forward. Health as a business management issue in the 21st century1st ed Mar 2004 ISBN 978–0–85293–403–6 £56.00

Report on leukaemia risks in relation to benzene exposure1st ed May 2003 ISBN 978–0–85293–396–1 £45.00

Provides guidance to management and staff about the role and function of occupational health support within their companies.1st ed Jul 2002 ISBN 978–0–85293–373–2 £57.00

Occupational health provision1st ed Jul 2001 ISBN 978-0-85293-373-2 £57.00

Psychological wellbeing in the workplace1st ed Mar 1999 ISBN 978–0–85293–248–3 £51.00

Procedures for reporting occupationally related illness1st ed Feb 1999 ISBN 978–0–85293–246–9 £68.00

Air quality and its association with respiratory disease1st ed 1994 ISBN 978–0–85293–147–9 £69.00

The human health effects of benzene1st ed Dec 1992 ISBN 978–0–85293–135–6 £72.00

Occupational health and hygieneHealth technical information sheetsThese sheets have been produced by the EI’s Health Technical Committee (HTC) to provide guidance to industry on a number of health related issues .HTIS 1: Individual health risk assessmentsHTIS 2: Medication and workHTIS 3: Medication and work – a brief guide for managersAvailable free online at www .energypublishing .org


Legionellosis risk management and Legionella control. Guidance for oil and gas facilities, offshore platforms and refineriesThis guidance is designed to provide industry with a documented risk assessment and monitoring program which aims to minimise the opportunity for a Legionellosis outbreak from oilfield water systems . In addition, the guidance provides a documented procedure that offers direction on eradicating Legionella contamination once a system has been infected .This document should be used in conjunction with the HSE Approved code of practice and guidance document, Legionnaires’ disease: The control of Legionella in water systems (L8) .1st ed May 2007 ISBN 978–0–85293–466–1 £49.00

Model code of safe practice Part 11: Bitumen safety code4th ed Nov 2005 ISBN 978–0–85293–402–9 £90.00

Petroleum road tanker drivers: Evaluation and control of exposure to noise1st ed Jun 2002 ISBN 978–0–85293–357–2 £53.00

Workshop on fatigue1st ed Feb 2001 ISBN 978–0–85293–314–5 £32.00

Implementation of pregnant workers directive management of health and safety at work (amendment) regulations 19941st ed 1996 ISBN 978–0–85293–174–5 £57.00

Air quality and emissionsAir quality and its association with human health effects – an update1st ed Jul 2001 ISBN 978–0–85293–342–8 £42.00

Air quality and its association with respiratory disease1st ed 1994 ISBN 978–0–85293–147–9 £69.00


10

Hum

an a

nd o

rgan

isat

iona

l fac

tors

Research report: Human factors performance indicators for the energy and related process industries This report sets out the current thinking on safety PIs and the processes used to ensure appropriate indicators are selected . It describes how human factors are monitored within industry, using the findings from a literature appraisal, a joint industry workshop, and direct consultation with users of PIs . 1st ed Dec 2010 ISBN 978-0-85293-587-3 £15.00

Guidance on managing human and organisational factors in decommissioning This guidance aims to steer the user through the types of human factors considerations that should be taken into account during the various phases of decommissioning a facility . The example given is of a nuclear power plant; however, whilst the decommissioning phases, activities and terminology used are nuclear specific, most are also relevant across wider energy industry sectors .1st ed Mar 2010 ISBN 978-0-85293-555-2 £20.00

Guidance on investigating and analysing human and organisational factors aspects of incidents and accidentsProvides guidance on good human and organisational factors analysis in incident and accident investigations . It will assist all those who are involved in an incident investigation or analysis either as the lead investigator or part of the supporting team . This publication is available free online at www .energyinst .org/humanfactors1st ed May 2008 ISBN 978-0-85293-521-7 £10.00

Human failure typesAn e-learning tool that enables users to explore the possibility of human failure in risk assessments and identify barriers to reduce risks . It is also designed to be of assistance when exploring human failure causation in incident and accident investigations . Available free online at www .energyinst .org/humanfactors

Guidance on effective workforce involvement in health and safetyGuidance on workforce involvement for employers, managers, safety representatives, trade union officials, contractors and workers . Specifically, it provides guidance on how to improve workforce involvement in health and safety and make it more effective . Active involvement of workers in decision making should bring tangible benefits to health and safety through the sharing of objectives . This document is free online at www .energyinst .org/humanfactors1st ed Apr 2008 ISBN 978–0–85293–498–2 £10.00

Managing contractors – a guide for the energy industryGood practice guidelines that provide a consistent and comprehensive approach to managing the health and safety of contractors on power generation sites with a particular focus on working with foreign nationals .

These guidelines cover initial contracting through to managing the staff on site . They review current practices used by power generation companies, provide assistance on the development of guidelines for contract tendering, and the management of staff on site, with specific recommendations for managing multilingual contracting staff during all stages of the contract including at induction .1st ed Dec 2006 ISBN 978–0–85293–251–3 £115.00

Improving alertness through effective fatigue managementDeveloped to supplement the Health and Safety Executive’s (HSE’s) work with information derived from the latest research, practical applications and case studies on alertness and fatigue relevant to all sectors of the petroleum industry from offshore exploration and drilling to distribution . It is also useful for allied industries and draws on examples from many different sectors to illustrate the problem and provide some potential solutions . This publication brings together the most accurate and industry-relevant information in one place . Available free online at www .energyinst .org/humanfactors1st ed Sep 2006 ISBN 978–0–85293–460–9 £10.00

EI Research Report: Viability of using sleep contracts as a control measure in fatigue managementThis report should be read by those wishing to explore use of sleep contracts as an option in fatigue management; however, it forms an adjunct to the more general publication Improving alertness through effective fatigue management, which covers the broader topic of fatigue risk management in the petroleum and allied industries . Available free online at www .energyinst .org/humanfactors1st ed Feb 2006 ISBN 978–0–85293–455–5 £10.00

Safety information bulletinsAvailable free online at www .energyinst .org/humanfactors

Safe staffing arrangements – user guide for CRR348/2001 methodology: Practical application of Entec/HSE process operations staffing assessment methodology and its extension to automated plant and/or equipment1st ed April 2004 ISBN 978–0–85293–411–1 £10.00

Human factors briefing notes resource packThe resources are also freely available online at www .energyinst/humanfactors1st ed May 2003 ISBN 978–0–85293–400–5 £84.00

Report of workshop on human factors in the petroleum industry1st ed Nov 2002 ISBN 978–0–85293–374–9 £20.00

Workshop on fatigue1st ed Feb 2001 ISBN 978–0–85293–314–5 £32.00

Human and organisational factorsHuman and organisation factors provides a means to further improve occupational and process safety performance . It is increasingly becoming a key focus area within industry .

The EI Human and Organisational Factors Committee serves as the UK focal point for human and organisational factors affecting the energy and allied industries . The Committee aims to help the energy sector understand and apply human and organisational factors to its operations by engaging the industry and its stakeholders, supporting the industry by commissioning studies, sharing knowledge and providing human factors tools, many of which are freely available at www.energyinst.org/humanfactors .

Whilst several kindred organisations are actively working in this area in the UK, Europe and globally, the EI Human and Organisational Factors Committee offers a unique forum for all sectors of the energy industry and its stakeholders .

See inside front cover for human factors courses run by the EI: Basic human factors awareness and Human factors incident and accident investigation and analysis

How strong isyour HSE culture?

www.energyinst.org.uk/heartsandminds

Visitwww.energyinst.org.uk/heartsandminds

to find out more…World-class health, safety and environment (HSE) performance involves more than mechanically applying a management system. It requires the involvement of everyone in the organisation, from top to bottom, utilising knowledge at all levels, and fully integrating HSE within everyday behaviour.

How strong is your HSE culture?

Winning Hearts and Minds is about getting everyone to work safely, not because they’ve been told to, but because they want to work safely and know how to achieve this. Hearts and Minds is about improving the culture of safety in an organisation, making safety a fully integrated part of working behaviour, and in the process easier to manage.

• Understanding your culture • Safety appraisals for everyone (SAFE) • Making change last • Risk assessment matrix • Achieving situation awareness: The rule of 3 • Managing rule breaking • Improving supervision • Working safely • Driving for excellence

Orders for materials can be placed through the EI website www.energyinst.org.uk/heartsandminds or by contacting the EI’s distributors, Portland Customer Services, the EI’s book distribution agent +44 (0)1206 796 351.

World class HSE performanceThe Hearts and Minds safety toolkit was developed by Shell E&P, based upon 20 years of university research, and is being successfully applied in both Shell and non-Shell companies around the world.


The HSE culture ladder

The Hearts and Minds toolkit

SAFE Appraisal system (Safety Appraisals For Everyone)This Hearts and Minds tool utilises a simple technique for comparing how you see yourself against other’s perceptions. It focuses on how you communicate your commitment to HSE practices and how committed you really are.

Feedback is provided confidentially and the system enables users to develop an effective action plan for improvement.

Companies utilising the tool can assess performance on a group and/or company wide level.

To learn more about SAFE, visit www.safeappraisal.org, or contact [email protected] to discover more about this tool and how it can be implemented within your organisation.

Hearts and Minds newsHearts and Minds workshops are planned for 2011. Contact Stuart King for futher information: [email protected]



12

Proc

ess

safe

ty

CorrosionExternal corrosion awareness handbook: A guide for visual recognition of external integrity threats to upstream oil and gas production plantThis is an essential handbook for all process support personnel tasked with the day to day management and fabric maintenance . The areas of external corrosion covered include examples of structures, process and electrical equipment . Also included are those from corrosion under insulation and stainless steels mechanisms . As fatigue failure is also seen as a significant threat, the opportunity has been taken to include examples of vibration fatigue and fretting .1st ed Feb 2010 ISBN 978-0-85293-548-4 A5 £41.001st ed Feb 2010 ISBN 978-0-85293-548-4 A6 £37.00

Corrosion threats handbook–Upstream oil and gas production plantA concise reference tool, designed to raise awareness and assist key managers and engineers on corrosion issues in their day-to-day jobs . The main corrosion threats for process and utility systems in oil an gas production facilities are identified through a series of process diagrams, and for each specific threat, diagrams show where to look and ways to mitigate . 1st ed May 2008 ISBN 978–0–85293–496-8 A5 A5 £41.001st ed Dec 2008 ISBN 978-0-85293-496-8 A6 A6 £37.00

Guidance for corrosion management in oil and gas production and processingThis publication provides a framework for developing an effective company corrosion management strategy to assist with maintaining process plant and structural integrity for the petroleum industry . Adapting and updating existing Health and Safety Executive (HSE) research, this guidance provides detailed sections for each corrosion mechanism and appropriate mitigation techniques .1st ed May 2008 ISBN 978–0–85293–497–5 £126.00

Carbon capture and storageGood plant design and operation for onshore carbon capture installations and onshore pipelinesOverview of CCS technology including new plant equipment and what is currently in use within the CCS or other industries . Includes:• In depth guide to carbon dioxide to broaden the readers

understanding of the material and its health and safety issues .

• Key design features of plant and pipelines for carbon dioxide service including experience gained from the industrial gases sector .

• Key operational information for plant and pipelines for carbon dioxide service including experience gained from the industrial gases sector to ensure that your operating practices take into account the latest operational experiences from carbon dioxide plant .

Available for free download at www .energypublishing .org1st ed Sep 2010 ISBN 978-0-85293-540-8 £41.00

Technical guidance on hazard analysis for onshore carbon capture and storage installations and pipelinesThis document sets out the methodology for implementing appropriate hazard analysis for carbon dioxide related hazards on onshore carbon capture installations and pipelines . The document includes:• Hazard and risk analysis for carbon dioxide systems onshore .• Failure frequency data sources for carbon dioxide .• Detailed guidance on using currently available commercial

dispersion models for carbon dioxide .• Fatal area predictions using SLOT/SLOD data and dispersion

modelling .• Gaps and uncertainties in carbon dioxide hazard analysis .Available for free download at www .energypublishing .org1st ed Sep 2010 ISBN 978-0-85293-541-5 £41.00

See inside front cover for a corrosion management course run by the EI: Corrosion management essentials

DesignResearch report: Hazard and risk assessment for bulk liquefied petroleum gas storage events This publication provides guidance on hazard and risk assessment for bulk liquefied petroleum gas (LPG) storage events such as fire and explosion . It is applicable to installations at petroleum refineries, import and distribution terminals, depots and large industrial customer installations where the storage capacity exceeds the top tier threshold of the UK Control of Major Accident Hazards (COMAH) Regulations . 1st ed Nov 2010 ISBN 978-0-85293-563-7 £73.00


API/EI Research report: Verification of lightning protection requirements for above ground hydrocarbon storage tanksThis publication collates a number of research reports commissioned by the API and EI to investigate the lightning phenomena and the adequacy of lightning protection measures on above ground hydrocarbon storage tanks . The research comprised a thorough literature review supplemented by practical testing simulating lightning strikes on storage tanks .1st ed Sep 2009 ISBN 978-0-85293-376-3 £82.00

Technical workshop proceedings: Fuel storage tank overfill prevention systemsProvides a summary of the presentations and discussions from a technical workshop held in July 2008 . The aim of the workshop was to provide a forum for industry and the Control of Major

Process safetyManufacture, handling and use of dangerous substances are major hazards - not only to workers but also to members of the public nearby, assets and the environment . Process safety considers these major hazards and assesses how to control them; in particular, by containing dangerous substances and pressurised systems and keeping them under control . Effective process safety management should minimise major accidents such as fires and explosions . Given several recent major accidents, process safety is particularly topical . EI process safety publications cover: design; emergency planning; ignition probabilities; hazardous area classification; key performance indicators; fire and explosion; etc . In addition, there are also publications on human and organisational factors which largely have been developed in support of process safety aspects of major accident hazards, installation integrity and hydrocarbon leak reduction .


13

Proc

ess

safe

ty

Accident Hazards (COMAH) Regulations Competent Authority (CA) to ensure a common understanding of the recommendations made by the Buncefield Major Investigation Board (MIIB) and the former Buncefield Standards Task Group (BSTG), in relation to fuel storage tank overfill prevention systems .1st ed Apr 2009 ISBN 978-0-85293-533-0 £37.00

Model code of safe practice Part 19: Fire precautions at petroleum refineries and bulk storage installationsGuidance on selecting, implementing and monitoring the performance of site-specific justified risk reduction measures to reduce the risk from design event fires at installations that process and store petroleum, intermediates and refined products . 2nd ed Feb 2007 ISBN 978–0–85293–437–1 £154.00

Offshore technical guidance catalogue with specific relevance to major accident hazardsThe catalogue is freely accessible to single users at www .energyinst .org/offshorecatalogue1st ed Oct 2005

Guidance for safer design of offshore installations: an overview1st ed Jul 2005 ISBN 978–0–85293–446–3 £38.00

Model code of safe practice Part 15: Area classification code for installations handling flammable fluids3rd ed 2005 ISBN 978–0–85293–418–0 £129.00

Model code of safe practice Part 9: Liquefied petroleum gas. Vol.1. Large bulk pressure storage and refrigerated LPG2nd ed 1987 ISBN 978–0–471–91612–3 £82.00

Hydrocarbon release reductionGuidelines for the avoidance of vibration induced fatigue failure in process pipeworkThe revised guidelines aim to reduce the frequency of leaks from process pipework by ensuring their continuing integrity . They provide a comprehensive approach to the ‘through life’ management of pipework vibration-induced fatigue and provide both qualitative and quantitative assessment methods . The revised guidelines capture more experience of their practical application; have improved usability; include an updated assessment methodology; include intrusive elements; have an extended scope of small bore connection designs; and, include work published by the Health and Safety Executive .2nd ed Jan 2008 978–0–85293–463–0 £225.00

Guidelines for the management of integrity of bolted joints in pressurised systemsThe aim of these guidelines, published by the EI in association with Oil and Gas UK, is to provide plant operators and service companies with a framework for the management of bolted joints used in pressurised systems and to assist companies to develop their own processes to meet the principles of the guidelines . The good practice outlined in the first edition has been enhanced to reflect recent knowledge and experience gained and widened to include in-service inspection .2nd ed Jun 2007 ISBN 978–0–85293–461–6 £90.00

Flexible hose management guidelines1st ed Jan 2003 ISBN 978–1–903003–21–3 £60.00

Compression fittings and small bore tubing awareness for downstream oil and gasFor more details, contact Atlas Interactive, Offshore House, Claymore Drive, Bridge of Don, Aberdeen, AB23 8GD, UK . t: +44 (0)1224 708430 www .atlasinteractive .com

Guidelines for the management, design, installation and maintenance of small bore tubing systems1st ed Jun 2000 ISBN 978–0–85293–275–9 £87.00

Management systemsHigh level framework for process safety managementProvides a common understanding of requirements for all levels in the organisation and provides a consistent basis for discussion with the regulator .Further information on process safety management can be found here: www .energyinst .org/PSM-framework1st ed Dec 2010 ISBN 978-0-85293-584-2 £15.00

Technical workshop proceedings: Initial report – Framework for high-level process safety managementThis publication provides a non-verbatim summary of the presentations and discussions from a technical workshop held on 15 July 2009 . This publication was used to focus work towards High level framework for process safety management .1st ed Mar 2010 ISBN 978-0-85293-553-8 £15.00

Research report: A framework for monitoring the management of ageing effects on safety critical elementsThis research report provides a framework to determine suitable performance indicators, analysis tools and organisational steps that can be applied to assess ageing effects of SCEs offshore .1st ed Nov 2009 ISBN 978-0-85293-545-3 £99.00

Guidance on investigating and analysing human and organisational factors aspects of incidents and accidentsProvides guidance on good human and organisational factors analysis in incident and accident investigations . It will assist all those who are involved in an incident investigation or analysis either as the lead investigator or part of the supporting team . This publication is available free online at www .energyinst .org/humanfactors1st ed May 2008 ISBN 978-0-85293-521-7 £10.00

Guidance on effective workforce involvement in health and safetyGuidance on workforce involvement for employers, managers, safety representatives, trade union officials, contractors and workers . Specifically, it provides guidance on how to improve workforce involvement in health and safety and make it more effective . Active involvement of workers in decision making should bring tangible benefits to health and safety through the sharing of objectives . This document is free online at www .energyinst .org/humanfactors1st ed Apr 2008 ISBN 978–0–85293–498–2 £10.00

Guidelines for the management of safety critical elementsProviding good practice for the management of safety critical elements for offshore installations, the guidelines should be of use principally for those involved in assurance and verification, and also to duty holders, managers of operations, safety, engineering and maintenance functions .The 2nd edition of this publication replaces UKOOA Guidelines for the management of safety critical elements (first published in September 1996); it includes experience gained since the first edition as well as updating the legislative framework .2nd ed Apr 2007 ISBN 978–0–85293–462–3 £99.0050% discount for EI and Oil and Gas UK Members

EI Research report: A framework for the use of key performance indicators of major hazards in petroleum refiningDescribes the analysis and interpretation of incidents from UK petroleum refineries that had a potential to escalate to major hazards . Their causes are benchmarked against dangerous occurrence potential incidents and actual major hazard incidents drawn from databases and analysed using, where possible, the same methodology . This has been used to test the correlation between their respective causes, and to consider appropriate key performance indicators (KPIs) that could be used to provide a measure of major hazards in the petroleum refining industry .1st ed Jan 2006 ISBN 978–0–85293–451–7 £40.00


14

Haz

ardo

us a

rea

clas

sific

atio

n

Model code of safe practice Part 1: The selection, installation, inspection, and maintenance of electrical and non electrical apparatus in hazardous areasThis model code is essential reading for all those involved in the manufacture, supply, and management of certified Ex equipment used in hazardous areas . It provides up to date guidance on the selection, installation, inspection and maintenance of explosion protected Ex electrical and non-electrical apparatus, primarily used in both the onshore and offshore petroleum industry . 8th ed Jun 2010 ISBN 978–0–85293–558–3 £143.00

Research Report: Dispersion modelling and calculations in support of EI Model code of safe practice Part 15: Area classification code for installations handling flammable fluidsThis publication focuses on three main technical issues . Firstly, sensitivity analysis of ambient temperature, relative humidity, weather and surface roughness on dispersion characteristics from point sources for various fluid categories . Secondly, sensitivity analysis of the nature and ambient temperature of the underlying surface, weather, and surface roughness on dispersion characteristics from pools of various diameters and depths, for various fluid categories . Thirdly, determination of whether any existing EI15 fluid categories apply to LNG, or if it requires specific modelling and sensitivity analysis of parameters to determine dispersion characteristics . 2nd ed Apr 2008 ISBN 978–0–85293–489–0 £73.00

EI Research Report: Ignition probability review, model development and look–up correlationsProvides the findings of an Oil and Gas UK/HSE/EI co–sponsored project to improve the modeling of ignition probabilities in onshore and offshore installation QRAs . This comprehensive report includes a free CD–Rom that comprises three workbooks: two provide the ignition probability model in both single scenario and multirun formats; whereas the third workbook enables users to look up charts of ignition probabilities for generic scenarios .1st ed Jan 2006 ISBN 978–0–85293–454–8 £105.00

Model code of safe practice Part 15: Area classification code for installations handling flammable fluidsProvides a well-established, internationally accepted model code which includes a demonstrable methodology for specifying hazard radii . Essential reading for managers and all those involved in the hazardous area classification of installations handling flammable fluids .3rd ed 2005 ISBN 978–0–85293–418–0 £129.00

Predictions of minimum spark ignition energy and quenching distances for CH4/H2 and C3H8/H2 mixtures with air1st ed May 2002 ISBN 978–0–85293–354–1 £32.00

A risk–based approach to hazardous area classification1st ed Nov 1998 ISBN 978–0–85293–238–4 £108.00

Human factors briefing notes resource packThe resources are also freely available online at www .energyinst .org/humanfactors1st ed May 2003 ISBN 978–0–85293–400–5 £84.00

Process plantGuidelines for the design and protection of pressure systems to withstand severe fires1st ed Mar 2003 ISBN 978–0–85293–279–7 £65.00

Guidelines for the safe and optimum design of hydrocarbon pressure relief and blowdown systems1st ed Aug 2001 ISBN 978–0–85293–287–2 £265.00

Guidelines for the design and safe operation of shell and tube heat exchangers to withstand the impact of tube failure1st ed Sep 2000 ISBN 9780–85293286–5 £65.00

Risk analysisTechnical guidance on hazard analysis for onshore carbon capture and storage installations and pipelinesThis document sets out the methodology for implementing appropriate hazard analysis for carbon dioxide related hazards on onshore carbon capture installations and pipelines . The document includes:• Hazard and risk analysis for carbon dioxide systems onshore .

• Failure frequency data sources for carbon dioxide .• Detailed guidance on using currently available commercial

dispersion models for carbon dioxide .• Fatal area predictions using SLOT/SLOD data and dispersion

modelling .• Gaps and uncertainties in carbon dioxide hazard analysis .Available for free download at www .energypublishing .org1st ed Set 2010 ISBN 978-0-85293-541-5 £41.00

EI Research Report: Ignition probability review, model development and look–up correlationsProvides the findings of an Oil and Gas UK/HSE/EI co–sponsored project to improve the modeling of ignition probabilities in onshore and offshore installation QRAs . This comprehensive report includes a free CD–Rom that comprises three workbooks: two provide the ignition probability model in both single scenario and multirun formats; whereas the third workbook enables users to look up charts of ignition probabilities for generic scenarios .1st ed Jan 2006 ISBN 978–0–85293–454–8 £105.00

PARLOC 2001 – Pipeline and riser loss of containment database5th ed Jul 2003 ISBN 978–0–85293–404–3 £59.00

Guide to quantitative risk assessment for offshore installations1999 ISBN 978–1–870553–36–0 £171.00

Hazardous area classificationThe Energy Institute has conducted numerous research initiatives to develop the technical content in Model code of safe practice Part 15: Area classification code for installations handling flammable fluids (EI 15, formerly referred to as IP 15) . EI 15 is a well-established, internationally accepted publication that provides methodologies for hazardous area classification around equipment storing or handling flammable fluids in the production, processing, distribution and retail sectors . It constitutes a sector-specific approach to achieving the hazardous area classification requirements for flammable fluids, as required in the EU through Directive 99/92/EC, implemented in UK law by the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) .


15

Elec

tric

al s

afet

y

Model code of safe practice Part 1: The selection, installation, inspection, and maintenance of electrical and non electrical apparatus in hazardous areasThis model code is essential reading for all those involved in the manufacture, supply, and management of certified Ex equipment used in hazardous areas . It provides up to date guidance on the selection, installation, inspection and maintenance of explosion protected Ex electrical and non-electrical apparatus, primarily used in both the onshore and offshore petroleum industry . 8th ed Jun 2010 ISBN 978–0–85293–558–3 £143.00


Guidelines for managing inspection of Ex electrical equipment ignition risk in support of IEC 60079-17This title assists users in the continuing management of ignition risk by assuring continuing integrity of Ex electrical equipment type of protection . The document promotes the adoption of risk-based inspection (RBI) principles to inspection of Ex electrical equipment – this should result in high risk Ex electrical equipment being inspected more rigorously than lower risk items . A detailed methodology that takes into account ‘as low as reasonable practical’ (ALARP) principles develops the RBI concept further .1st ed Oct 2008 ISBN 978-0-85293-513-2 £112.00

EI Research Report: Review of methods of bonding a hydrant dispenser (servicer) to an aircraft for refuellingCollates all available guidance and regulatory material on the bonding of refuelling equipment to aircraft and documents key differences between the recommended methods or sequences . Provides a technical evaluation of the different methods of bonding of refuelling equipment to aircraft, in terms of the reduction in the level of risk that the method provides for the refuelling operation . It also provides recommendations for a standard bonding sequence that could be followed internationally to provide an appropriate level of safety for the refuelling operation .1st ed Aug 2007 ISBN 978-0-85293-475-3 £72.00

Guidance on assessing the safety integrity of electrical supply protectionProvides an efficient risk–based assessment methodology for determining safety integrity level (SIL) requirements and SIL allocations for the electrical protection function of various plant items . The methodology applies the safety integrity principles of IEC 61508/IEC 61511 to the protection of equipment and systems that are used in electricity supply, including the machinery involved . By applying the methodology and guidance provided, electrical practitioners in the petroleum industry (both onshore and offshore) and allied process industries should be able to design, install, operate, modify and evaluate new and existing electrical supply protection equipment and systems using the safety integrity principles of IEC 61508/IEC 61511 .1st ed Oct 2006 ISBN 978–0–85293–468–8 £63.00

Model code of safe practice Part 15: Area classification code for installations handling flammable fluids3rd ed 2005 ISBN 978–0–85293–418–0 £129.00

Electrical installation of facilities for the storage and dispensing of LPG and CNG automotive fuels at vehicle refuelling stationsAvailable free online at: www .energypublishing .org1st ed Nov 2003 ISBN 978–0–85293–410–4 £50.00

Seminar Proceedings: ‘Can mobile phone communications ignite petroleum vapour?’1st ed Jun 2003 ISBN 978–0–85293–401–2 £98.00

Model code of safe practice Part 21: Guidelines for the control of hazards arising from static electricity2nd ed Apr 2002 ISBN 978–0–85293–356–5 £115.00

Report on the risk of static ignition during vehicle refuelling: A study of the available relevant research1st ed May 2001 ISBN 978–0–85293–306–0 £74.00

An assessment of electrostatic ignition risks and filling rules for loading road tankers with low sulphur diesel1st ed 2000 ISBN 978–0–85293–313–8 £29.00

Controlling the risks from static electricity12–minute DVD supported by trainer’s notes, pocket guide and poster . Order from Training Video Associates, 1A Kent Avenue, Harrogate, HG1 2ES, UK t: +44 (0)1423 531727 . 1st ed 1999 £247.00 (+VAT)

Electrical safetyElectrical issues affect all aspects of upstream and downstream petroleum industry operations, including: the classification of hazardous areas; testing of electrical equipment on petroleum installations; the control of potential hazards due to static electric discharge; the assessment of electrical supply protection, etc .

The research work carried out by the EI in these subject areas is co-ordinated by the EI’s Electrical Committee, and in addition to this activity the Committee manages a broad portfolio of EI codes of practice and guidance, represents the industry on national and international standards committees and contributes to enhancing the competence of electrical practitioners working on petroleum installations .


16

Inst

alla

tion

inte

grity

External corrosion awareness handbook: A guide for visual recognition of external integrity threats to upstream oil and gas production plantThis is an essential handbook for all process support personnel tasked with the day to day management and fabric maintenance . The areas of external corrosion covered include examples of structures, process and electrical equipment . Also included are those from corrosion under insulation and stainless steels mechanisms . As fatigue failure is also seen as a significant threat, the opportunity has been taken to include examples of vibration fatigue and fretting .1st ed Feb 2010 ISBN 978-0-85293-548-4 A5 £41.001st ed Feb 2010 ISBN 978-0-85293-548-4 A6 £37.00

Research report: A framework for monitoring the management of ageing effects on safety critical elementsThis research report provides a framework to determine suitable performance indicators, analysis tools and organisational steps that can be applied to assess ageing effects of SCEs offshore .1st ed Nov 2009 ISBN 978-0-85293-545-3 £99.00

Guidelines for the management of integrity of subsea facilitiesThis guideline provides recommendations to operators and contractors on how to manage system integrity and reliability . It addresses consideration, at the design stage, of those features that will encourage integrity and reliability, and support maintainability, throughout field life and into the decommissioning phase .1st ed Apr 2009 ISBN 978-0-85293-537-8 £135.00

Corrosion threats handbook–Upstream oil and gas production plantA concise reference tool, designed to raise awareness and assist key managers and engineers on corrosion issues in their day-to-day jobs . The main corrosion threats for process and utility systems in oil an gas production facilities are identified through a series of process diagrams, and for each specific threat, diagrams show where to look and ways to mitigate . 1st ed May 2008 ISBN 978–0–85293–496-8 A5 A5 £41.001st ed Dec 2008 ISBN 978-0-85293-496-8 A6 A6 £37.00

Guidance for corrosion management in oil and gas production and processingThis publication provides a framework for developing an effective company corrosion management strategy to assist with maintaining process plant and structural integrity for the petroleum industry . Adapting and updating existing Health and Safety Executive (HSE) research, this guidance provides detailed sections for each corrosion mechanism and appropriate mitigation techniques .1st ed May 2008 ISBN 978–0–85293–497–5 £126.00

Guidelines for the avoidance of vibration induced fatigue failure in process pipeworkThe revised guidelines aim to reduce the frequency of leaks from process pipework by ensuring their continuing integrity . They provide a comprehensive approach to the ‘through life’ management of pipework vibration-induced fatigue and provide both qualitative and quantitative assessment methods . They capture more experience of their practical application; have improved usability; include updated assessment methodology; include intrusive elements; have an extended scope of small bore connection designs; and, include work published by the Health and Safety Executive .2nd ed Jan 2008 978–0–85293–463–0 £225.00

Capability maturity model for maintenance managementA tool to support industry’s commitment to safety, reliability and availability through improving the management of maintenance . It builds upon experience gained from previous maturity models developed for the HSE and other duty holders . The assessment model uses capability maturity modelling to measure organisational behaviour . When applied, the model provides a profile of the strengths and weaknesses of the core and supporting processes associated with maintenance activities . Includes a CD Rom containing audit recording sheets .1st ed Nov 2007 ISBN 978–0–85293–487–6 £126.00

Guidelines for the management of integrity of bolted joints in pressurised systemsThe aim of these guidelines, published by the EI in association with Oil and Gas UK, is to provide plant operators and service companies with a framework for the management of bolted joints used in pressurised systems and to assist companies to develop their own processes to meet the principles of the guidelines . The good practice outlined in the first edition has been enhanced to reflect recent knowledge and experience gained and widened to include in-service inspection .2nd ed Jun 2007 ISBN 978–0–85293–461–6 £90.00

Flexible hose management guidelines1st ed Jan 2003 ISBN 978–1–903003–21–3 £60.00

Compression fittings and small bore tubing awareness for downstream oil and gasFor more details, contact Atlas Interactive, Offshore House, Claymore Drive, Bridge of Don, Aberdeen, AB23 8GD, UK . t: +44 (0)1224 708430, www .atlasinteractive .com

Guidelines for the management, design, installation and maintenance of small bore tubing systems1st ed Jun 2000 ISBN 978–0–85293–275–9 £87.00

Installation integrity There has been an increased focus on assuring the continuing fitness for purpose of existing installations, especially mature installations . Structures, plant, equipment or systems, which could either cause, or contribute to, a major accident, need to be effectively managed in order to prevent or limit the effects of failure .

For the upstream petroleum industry this effort largely has been driven by the work of the Installation Integrity Work Group, a forum comprising industry, regulator and other representatives, in support of the Health and Safety Executive Offshore Division’s Key Programme 3 (KP3) – Asset Integrity Programme . The EI has led several technical initiatives that support the KP3 aim to encourage good practice in integrity management, continuous improvement, and minimising the potential for accidents .

In addition to the installation integrity resources listed here, the EI also has publications that focus on process safety and hydrocarbon leak reduction .


17

Off

shor

e sa

fety


Model code of safe Part 17 Volume 1: High pressure and high temperature well planningThis model code covers activities associated with HPHT wells which have an impact on safety offshore and therefore require special care and attention . The contents should be viewed as the minimum good practice to be applied in order to achieve a safe working environment in HPHT operations1st ed Apr 2009 ISBN 978–0-85293-529-3 £82.00

Model code of safe Part 17 Volume 3: High pressure and high temperature well completions and interventionsThis model code should be considered as a starting point for the operators and drilling contractors performing completions and interventions in a HPHT well . It addresses a range of completion and intervention activities which have an impact on safety offshore .1st ed Apr 2009 ISBN 978–0-85293-530-9 £82.00

Model code of safe Part 17 Volume 2: Well control during the drilling and testing of high pressure, high temperature offshore wellsPart 17 Volume 2 is an extensive guide for operators and contractors who are involved with the drilling of the ‘high pressure, high temperature’ wells in an offshore environment . It assists the identification and assessment of risk and risk mitigation .2nd ed Apr 2008 ISBN 978–0-85293-507-1 £126.00

Buy the complete set of Model code of safe practice Part 17 Volumes 1-3 for only £204 .00 at www .energypublishing .org

Guidelines for the management of safety critical elementsProviding good practice for the management of safety critical elements for offshore installations, the guidelines should be of use principally for those involved in assurance and verification, and also to duty holders, managers of operations, safety, engineering and maintenance functions .

The second edition of this publication replaces UKOOA Guidelines for the management of safety critical elements (first published in September 1996); it includes experience gained since the first edition as well as updating the legislative framework .2nd ed Apr 2007 ISBN 978–0–85293–462–3 £99.0050% discount for EI and Oil and Gas UK Members

Offshore technical guidance catalogue with specific relevance to major accident hazardsThe catalogue is freely accessible to single users at www .energyinst .org/offshorecatalogue1st ed Oct 2005

Guidance for safer design of offshore installations: an overview1st ed Jul 2005 ISBN 978–0–85293–446–3 £38.00

Model code of safe practice Part 15: Area classification code for installations handling flammable fluids3rd ed Mar 2005 ISBN 978–0–85293–418–0 £129.00

Model code of safe practice Part 1: Electrical safety code7th ed Aug 2003 ISBN 978–0–85293–225–4 £119.00

PARLOC 2001 – Pipeline and riser loss of containment database5th ed Jul 2003 ISBN 978–0–85293–404–3 £59.00

Guidelines for the design and protection of pressure systems to withstand severe fires1st ed Mar 2003 ISBN 978–0–85293–279–7 £65.00

Guidelines for the safe and optimum design of hydrocarbon pressure relief and blowdown systems1st ed Aug 2001 ISBN 978–0–85293–287–2 £265.00

Guidelines for the analysis of jackup and fixed platform well conductor systems1st ed Jul 2001 ISBN 978–0–85293–284–1 £123.00

Guidelines for the design and safe operation of shell and tube heat exchangers to withstand the impact of tube failure1st ed Sep 2000 ISBN 978-0–85293–286–5 £65.00

Guide to quantitative risk assessment for offshore installations1999 ISBN 978–1–870553–36–0 £171.00

Floating structures: A guide for design and analysis1998 ISBN 978–1–870553–35–3 £257.00

Guidelines for routine and non-routine subsea operations from floating vessels1st ed 1995 ISBN 978–0–85293–156–1 £123.00

Offshore safetyThe EI’s offshore safety resources focus on operation of different installation types and wells, and design and analysis of equipment . Using these resources should help duty holders to better manage the safety of offshore installations; in particular, major accident hazards .

In addition to the offshore safety resources listed here, see also sections on process safety, installation integrity and hydrocarbon leak reduction .


18

Petr

oleu

m p

rodu

ct s

tora

ge &

dis

trib

utio

n

Distribution installationsGuidance on the declassification of tanks previously in leaded gasoline serviceThe publication sets out a test protocol for evaluating exposure to lead resulting from previous contamination from organic lead gasoline additives . It sets out procedures for the declassification of gasoline storage tanks used in the refining and distribution sectors which were formerly in leaded gasoline service . The tests include a visual examination, analysis of samples of scale for organic and inorganic lead, and taking of air samples during worst-case simulated hot work carried out inside the storage tank on sections of the tank wall . If the test results are satisfactory, the tank may be ‘declassified’ . 2nd ed May 2010 ISBN 978-0-85293-560-6 £73.00


Environmental risk assessment of bulk liquids storage facilities: A screening toolA new screening tool for assessing the likely risk to the environment of an unplanned release of liquids from above ground bulk storage tanks . It supports the requirements of the European Integrated Pollution Prevention and Control (IPPC) legislation . The screening also includes an assessment of tertiary containment, consistent with UK COMAH requirements . Free of charge via the EI website: www .energyinst .org/envrisktool1st ed Jun 2009 ISBN 978–0–85293–393–0

Technical workshop proceedings: Fuel storage tank overfill prevention systemsProvides a summary of the presentations and discussions from a technical workshop held in July 2008 . The aim of the workshop was to provide a forum for industry and the Control of Major Accident Hazards (COMAH) Regulations Competent Authority (CA) to ensure a common understanding of the recommendations made by the Buncefield Major Investigation Board (MIIB) and the former Buncefield Standards Task Group (BSTG), in relation to fuel storage tank overfill prevention systems .1st ed Apr 2009 ISBN 978-0-85293-533-0 £37.00

Guidelines for the identification and control of hazards during the proving of road–loading gantry metersDescribes potential safety hazards and considers means of controlling these . Assists in developing safe work procedures .2nd ed Mar 2009 ISBN 978–0–85293–536–1 £70.00

Code of practice for a product identification system for petroleum productsThis is the sixth edition of the Code, which was last published in August 2004 . Changes have been made to the fifth edition to account for new product grades required by EC Directive 2003/17/EC, introducing a schedule for deleting obsolete identifiers, and providing common identifiers for fuels post January 1st 2009 where low sulfur content (<10 ppm) will be compulsory . Additionally, new identifiers have been introduced for unblended bio components (e .g . ethanol, FAME), high blend biofuels (e .g . E85, B50) and ultra low sulfur diesel for use by non-road machinery and agricultural and forestry tractors .6th ed Oct 2008 ISBN 978-0-85293-525-5 £61.00


Guidance for the storage and handling of fuel grade ethanol at petroleum distribution installationsThis guidance has been produced in response to the requirement for road fuel suppliers to ensure that a target percentage of their road fuel sales are biofuels (as mandated in the UK by the Renewable Transport Fuel Obligations, implementing European Directive 2003/30/EC) . It provides information on the properties of fuel grade ethanol, and describes the preferred practice of blending with gasoline at the road distribution terminal . It also gives guidance on the facilities and measures needed to manage the receipt, storage and handling, denaturing and blending of bioethanol .1st ed Apr 2008 ISBN 978-0-85293-516-3 £80.00

EI 1542 Identification markings for dedicated aviation fuel manufacturing and distribution facilities, airport storage and mobile fuelling equipmentProvides a system for marking aviation fuel types and grades on fuel handling installations and equipment at airports .8th ed Aug 2007 ISBN 978–0–85293–485–2 £62.00

Petroleum product storage and distributionIt can be a significant technical and logistical challenge to ensure that the large range of petroleum products, on which society depends, get to the right place at the right time, whilst meeting all appropriate health, safety and environmental protection requirements .

The EI’s Distribution and Marketing Committee, supported by various panels, is engaged in developing technical guidance for issues involved in the supply of fuels to customers . These committees are comprised of senior technical managers from the major oil companies operating in Europe, and technical representatives from UK trade associations .

The DMC is responsible for undertaking cost-effective scientific and technical work, particularly covering equipment used and procedures followed, for primary distribution from refineries to terminals, bulk storage, product loading, transport of product by road, transport of product by rail, delivery procedures, service stations, vapour collection and recovery .

Through committee activities and programmes, the EI aims to continually improve the safety performance of petroleum industry distribution and marketing operations, and contribute to the responsible and sustainable operation of the industry .


19

Petr

oleu

m p

rodu

ct s

tora

ge &

dis

trib

utio

n

Environmental guidelines for petroleum distribution installationsProduced in association with the Environmental Agency for England and Wales (EA), and the Scottish Environmental Protection Agency (SEPA), these guidelines can be used as a basis for managing the environmental impact of refinery off-sites, LPG, bitumen, aviation, authorised distributors and lubricant operations . The guidelines include an explanation for the oil industry, its customers and contractors of the environmental issues involved in the operational aspects of the business, the agreed industry view on environmental issues, guidelines to the best practices to minimise environmental impact, and an indication of future trends .2nd ed Apr 2007 ISBN 978–0–85293–440–1 £94.00

Model code of safe practice Part 19: Fire precautions at petroleum refineries and bulk storage installationsGuidance on selecting, implementing and monitoring the performance of site-specific justified risk reduction measures to reduce the risk from design event fires at installations that process and store petroleum, intermediates and refined products . 2nd ed Feb 2007 ISBN 978–0–85293–437–1 £154.00

Riskmanager™ for terminals: Generic risk assessment tool for petroleum distribution facilitiesRiskmanager™ for terminals is a software application that enables users to complete an operational risk assessment for a petroleum distribution facility, whether a terminal, depot or larger customer storage facility . It is intended for use by site managers, SHE managers, or those with an interest in managing or regulating risk drivers at such sites . The application takes the user through each area of a petroleum distribution facility using an activity-based risk assessment method and records the findings; in addition, it creates reports and action plans to appropriately address the risks identified . Completing a risk assessment using Riskmanager™ for terminals should help petroleum distribution facilities to meet pertinent operational (but not major hazards) safety, health and environmental legislative requirements, as well as satisfying other risk drivers . Software available on CD Rom (MS Windows only)1st ed Sep 2006 ISBN 978–0–85293–465–4 £209.00

Model code of safe practice Part 2: Design, construction and operation of petroleum distribution installations2nd ed Sep 2005 ISBN 978–0–85293–383–1 £131.00

EI Research Report: Investigation of factors causing leakage at road tanker loading gantry coupler/tanker adaptor interface1st ed Apr 2003 ISBN 978–0–85293–399–2 £45.00

Guidelines for terminal induction training of road tanker drivers1st ed Mar 2002 ISBN 978–0–85293–361–9 £45.00

Pocket guide to safety for personnel working on oil installations1st ed May 2000 ISBN 978–0–85293–292–6 £15.00


Research Project. Evaluation of the performance of meters in loading gantries. Phase 2 – Tests on products other than gas oil1st ed 2000 ISBN 978–0–85293–349–7 £31.00

Code of practice for drivers’ emergency actions on road loading racks1st ed Feb 1999 ISBN 978–0–85293–234–6 £61.00

Application of Control of Substances Hazardous to Health (COSHH) requirements for carcinogens at oil refineries and terminals1st ed Aug 1998 ISBN 978–0–85293–233–9 £61.00

Model code of safe practice Part 9: Liquefied petroleum gas. Vol.1. Large bulk pressure storage and refrigerated LPG2nd ed 1987 ISBN 978–0–471–91612–3 £82.00

Vapour recoveryGuidelines for the design and operation of gasoline vapour emission controls at distribution terminalsRevised to incorporate experience since the introduction of EU Directive 94/63/EC, these guidelines can be followed wherever gasoline vapour emissions controls are to be implemented . Focuses solely on the design, operation and maintenance of gasoline vapour emission control systems at gasoline distribution terminals .3rd ed Jun 2008 ISBN 978–0–85293–494–4 £95.00

Vapour recovery units – Guidance on preventing and controlling temperature excursions in carbon bedsThis publication provides operational procedures to monitor routinely carbon bed temperatures and to react in an expeditious way to control abnormal conditions .2nd ed Mar 2008 ISBN 978–0–85293–495-1 £63.00

EI Research Report: An investigation into suitable instruments for the measurement of total organic carbon (TOC) in emissions from petroleum distribution terminal vapour recovery units1st ed Jun 2004 ISBN 978–0–85293–423–4 £54.00

Procedures for the reclaim of duty on recovered vapour at duty suspended installations(Re-affirmed 2009)1st ed Mar 1999 ISBN 978–0–85293–218–6 £72.00

Road tanker operationsPetroleum road tanker design and constructionProvides comprehensive recommendations for the design and construction of complete road tankers for the conveyance of petrol, kerosene, diesel and gas oil . Certain recommendations may also be applicable to other petroleum products . Specific recommendations are given concerning the precautions that should be taken for road tankers intended for the carriage of aviation fuels, aviation gasoline (AvGas) and aviation turbine fuel (AvTur) . The scope of this publication also covers certain aspects for the transport of denatured ethanol .3rd ed Apr 2010 ISBN 978-0-85293-554-5 £143.00

Guidance on reducing human failure in petroleum product distribution loading and unloading operationsProvides practical guidance on reducing human failure and errors that occur during loading and unloading operations . Based on an earlier EI study that included an analysis of incidents and in-depth discussions with those active in petroleum product distribution . Supported by a free training package and a guide to conducting workshops (in CD Rom format) .1st ed Nov 2009 ISBN 978-0-85293-535-4 £61.00

Code of practice for petroleum road tanker vapour collection systems and equipment used in unloading operationsProvides recommendations pertaining to the design and operation of road tanker equipment for the safe and efficient transfer of gases (including petrol vapour) during the delivery operation between a filling station and a road tanker . In particular, it provides guidance for tanker control system design, vapour transfer hose(s) and fittings, inter-operability of vapour transfer hose connections including self-sealing valves, and a model procedure for deliveries involving vapour collection .1st ed Dec 2008 ISBN 978-0-85293-526-2 £61.00


20

Filli

ng s

tatio

ns

Design, construction and operation of workshops for petroleum road tanker maintenanceThis publication provides comprehensive guidance for those involved in the design, construction, operation and maintenance of workshops for petroleum road tankers . This addition includes reference to legislation applicable in the UK, notably Dangerous Substances and Explosive Atmosphere Regulations 2002, and the Work at Height Regulations 2005 .3rd ed Dec 2007 ISBN 978–0–85293–441–8 £80.00

Additional requirements to ‘A model written scheme for the examination, testing and certification of petroleum road tankers’ for ADR tankersThis guidance provides requirements extracted from EN 12972 Tanks for the transport of dangerous goods – Testing, inspection and marking of metallic tanks, itself referenced in chapter 6 .8 .2 .6 of ADR . This document should be read in conjunction with, A model written scheme for the examination, testing and certification of petroleum road tankers (2004), thereby offering users the facility to ensure that both ‘ADR tanks’ and ‘old tanks’ receive statutory in-service inspections to a similar standard while meeting regulatory requirements .1st ed May 2007 ISBN 978–0–85293–481–4 £40.00

Code of practice for the development of a response plan for significant incidents involving petroleum product road tankers2nd ed 2005 ISBN 978–0–85293–438–8 £98.00

Recommendations for radio communication equipment and its installation in petroleum road tankers2nd ed Dec 2004 ISBN 978–0–85293–391–6 £36.00

A model written scheme for the examination, testing and certification of petroleum road tankers1st ed Sep 2004 ISBN 978–0–85293–412–8 £60.00

A model syllabus for the training of technicians involved in the examination, testing, maintenance and repair of petroleum road tankers1st ed Aug 2004 ISBN 978–0–85293–409–8 £40.00

EI Research Report: Investigation of factors causing leakage at road tanker loading gantry coupler/tanker adaptor interface1st ed Apr 2003 ISBN 978–0–85293–399–2 £45.00

Fire resistance of mudwings for petroleum road tankers2nd ed Nov 2002 ISBN 978–0–85293–386–2 £68.00

Testing of vapour containment on petroleum road tankers1st ed 2001 ISBN 978–0–85293–318–3 £73.00

Maintenance of road tankers used for the conveyance of petroleum fuels1st ed Oct 2000 ISBN 978–0–85293–305–3 £51.00


Filling stationsCode of safe practice for contractors and retailers managing contractors working on filling stationsThis code of safe practice is essential reading for all companies or individuals who are contracted to carry out work on filling stations . It will assist contractors, sub-contractors and self-employed persons who are required to work on a filling station, to understand the inherent dangers and precautions necessary in such work, therefore enabling them to assess the risks involved to themselves, to their employees and to others who may be affected by this work, such as the site operator or retailer and their staff, other contractors, customers, the general public and property owners in the vicinity .1st ed Jul 2010 ISBN 978–0–85293–580–4 £92.00

Guidance on the declassification of tanks previously in leaded gasoline serviceThe publication sets out a test protocol for evaluating exposure to lead resulting from previous contamination from organic lead gasoline additives . It sets out procedures for the declassification of gasoline storage tanks used in the refining and distribution sectors which were formerly in leaded gasoline service . The tests include a visual examination, analysis of samples of scale for organic and inorganic lead, and taking of air samples during worst-case simulated hot work carried out inside the storage tank on sections of the tank wall . If the test results are satisfactory, the tank may be ‘declassified’ . 2nd ed May 2010 ISBN 978-0-85293-560-6 £73.00

Guidance on reducing human failure in petroleum product distribution loading and unloading operationsProvides practical guidance on reducing human failure and errors that occur during loading and unloading operations . Based on an earlier EI study that included an analysis of incidents and in-depth discussions with those active in petroleum product distribution . Supported by a free training package and a guide to conducting workshops (in CD Rom format) .1st ed Nov 2009 ISBN 978-0-85293-535-4 £61.00

Code of practice for a product identification system for petroleum productsThis is the sixth edition of the Code, which was last published in August 2004 . Changes have been made to the fifth edition to account for new product grades required by EC Directive 2003/17/EC, introducing a schedule for deleting obsolete identifiers, and providing common identifiers for fuels post January 1st 2009 where low sulfur content (<10 ppm) will be compulsory . Additionally, new identifiers have been introduced for unblended bio components (e .g . ethanol, FAME), high blend biofuels (e .g . E85, B50) and ultra low sulfur diesel for use by non-road machinery and agricultural and forestry tractors .6th ed Oct 2008 ISBN 978-0-85293-525-5 £61.00

Code of practice for entry into underground storage tanks at filling stationsProvides information on safety procedures and good practice methods for the safe entry of personnel into underground storage tanks at filling stations . References relevant health and safety legislation particularly that pertaining to entry into confined spaces, hazardous atmospheres and dangerous substances . Should be considered as complementary to EI Model code of safe practice Part 16: Tank cleaning safety code1st ed May 2008 ISBN 978-0-85293-504-0 £68.00

Guidance for the storage and dispensing of E5 petrol and B5 diesel at filling stationsProvides guidance for filling station operators on the introduction of E5 petrol (EN 228 petrol containing 5% ethanol), and/or B5 diesel (EN 590 diesel containing 5% fatty acid methylester (FAME)) . It suggests practical actions for operators to take to reduce their impact on existing filling station equipment and systems, and to assist filling station operators in their own assessment of the site-specific requirements for the management of change .1st ed Apr 2008 ISBN 978-0-85293-508-8 £12.00

Guidelines for uplift of product from retail filling stations and customers’ tanksProvides guidance on uplifting petroleum products from both underground and above–ground tanks by suitable road tankers and pumps, with details of equipment and operational procedures recommended for working safely, effectively and with minimum environmental risk .2nd ed Jan 2006 ISBN 978–0–85293–453–1 £68.00

Design, construction, modification, maintenance and decommissioning of filling stations2nd ed March 2005 ISBN 978–0–85293–419–7 £122.00


21

Filli

ng s

tatio

ns

Electrical installation of facilities for the storage and dispensing of LPG and CNG automotive fuels at vehicle refuelling stations1st ed Nov 2003 ISBN 978–0–85293–410–4 £50.00

Seminar Proceedings: ‘Can mobile phone communications ignite petroleum vapour?’1st ed Jun 2003 ISBN 978–0–85293–401–2 £98.00

Guidance on external cathodic protection of underground steel storage tanks and steel pipework at petrol filling stations1st ed Nov 2002 ISBN 978–0–85293–372–5 £84.00

Quantified risk assessment of the ignition of flammable vapour on petrol filling station forecourts during road tanker offloading due to thermite sparking1st ed Jul 2002 ISBN 978–0–85293–370–1 £93.00

Guidelines for soil, groundwater and surface water protection and vapour emission control at petrol filling stations1st ed Jun 2002 ISBN 978–0–85293–358–9 £21.00

Report on the risk of static ignition during vehicle refuelling: A study of the available relevant research1st ed May 2001 ISBN 978–0–85293–306–0 £74.00

Guidance document on risk assessment for the water environment at operational fuel storage and dispensing facilities1st ed Dec 1999 ISBN 978–0–85293–256–8 £98.00

Guidelines for investigation and remediation of petroleum retail sites1st ed Nov 1998 ISBN 978–0–85293–216–2 £98.00

Coming soon: Design, construction, modification, maintenance and decommissioning of filling stations third edition

The forthcoming edition of Design, construction, modification, maintenance and decommissioning of filling stations (also known as the Blue book) will be essential reading for all those involved in the design, construction, modification, maintenance and decommissioning of facilities for the storage and dispensing of vehicle fuels at either retail or commercial premises, as well as those involved in the enforcement of regulations applicable to such sites .

The current Blue book is the established technical guidance on providing information about storage and dispensing of petroleum products used

as fuels for motor vehicles (including petrol, diesel and autogas (also known as LPG)) . It provides information on civil, mechanical, hydraulic and electrical installation issues for the planning, design, construction, commissioning, modification, maintenance and decommissioning of filling stations, together with information aimed to minimise the risks from fire and explosion, to health and to the environment .

This new publication will be produced jointly by the Association for Petroleum and Explosives Administration (APEA) and the Service station panel of the EI . Considerable technical input has also been provided by UK competent authorities (the Health & Safety Executive and the Environment Agency), trade associations and professional organisations . Key technical changes in the new edition include:

• Updates to sections covering above-ground and below-ground storage tanks to reflect industry good practice .

• Incorporation of guidance covering fuels containing bio-components up to the allowable amounts identified in EN 228 and EN 590 (technical information is provided for fuels containing higher amounts of bio-component) .

• Development of guidance on engineered control measures for attended self-service (ASS) and unattended self-service (USS) sites . This technical guidance is in alignment with the operational guidance contained in the Chief Fire Officers Association (CFOA) publication: Petrol filling stations guidance on managing the risks of fire and explosion (the Red guide) .

• Updates to sections on vapour recovery to reflect changes in UK legislation and the uptake of stage 2 vapour recovery .

• Updates to sections on leak detection .

• Introduction of an Annex on Safety signs and safety information notices for signage particular to filling stations .

• Updates to sections on LPG to ensure alignment with UKLPG Codes of practice .

• Introduction of an Annex providing technical information on the storage and handling of AUS 32 .

This third edition will replace the edition published in 2005 . Although the Blue book makes frequent reference to legislation applicable in the UK, it is anticipated that the general principles will be applicable in most regions internationally .

3rd edition 978-0-85293-600-9


22

Avi

atio

n

Fuel filtrationEI 1583 Laboratory tests and minimum performance levels for aviation fuel filter monitorsProvides minimum recommendations for: selected aspects of filter monitor system and element performance; the general mechanical specifications for new filter monitor elements; laboratory tests and minimum performance requirements for the qualification of new filter monitor elements, and requalification and similarity requirements . It includes categories of filter monitor elements that have not been included in earlier editions of 1583 .6th ed Jan 2010 ISBN 978–0–85293–527–9 £72.00

EI 1550 Handbook on equipment used for the maintenance and delivery of clean aviation fuel*Provides key information on equipment that is used to maintain aviation fuel cleanliness, primarily filtration components, that are designed, constructed and tested in accordance with the requirements of seven aviation fuel cleanliness publications issued by the EI .Includes an overview of fuel cleanliness, and descriptions of the testing requirements for filtration components . It also provides information to assist in the successful application and operation of components in aviation fuel handling systems, and introduces the concept of electronic sensors for particulate matter/free water detection . Full colour throughout .1st ed Oct 2007 ISBN 978–0–85293–574–3 £147.00

EI 1599 Laboratory tests and minimum performance levels for aviation fuel dirt defence filters*Provides the industry with minimum recommendation for the general mechanical specifications for dirt defence filter elements, selected laboratory tests and minimum performance requirements for the qualification of new dirt defence filter element designs, as well as requalification and similarity requirements .The laboratory tests provide standard methods of evaluating selected aspects of the performance of new dirt defence filter element designs, which may be relevant to field service .1st ed Mar 2007 ISBN 978–0–85293–579–8 £69.00

EI 1596 Design and construction of aviation fuel filter vessels*Three types of vessels are covered in this publication: filter monitor, filter/water separator and microfilter vessels . It provides requirements for the design and construction of filter vessels and vessel accessories .1st ed Nov 2006 ISBN 978–0–85293–578–1 £72.00

EI Research Report: Electrostatic discharges in two inch aviation fuel filter monitors. Phase 2: Properties needed to control discharges1st ed Feb 2004 ISBN 978–0–85293–408–1 £62.00

EI Research Report: Investigation into the effects of lubricity additives on the performance of filter/water separators1st ed Mar 2003 ISBN 978–0–85293–395–4 £41.00

EI Research Report: Electrostatic discharges in 2-inch fuel filter monitors1st ed Oct 2002 ISBN 978–0–85293–388–6 £41.00

EI 1581 Specifications and qualification procedures for aviation jet fuel filter/separators*(Reaffirmed 2008)5th ed Jul 2002 ISBN 978–0–85293–575–0 £93.00

EI 1590 Specifications and qualification procedures for aviation fuel microfilters*(Reaffirmed 2008)2nd ed Apr 2002 ISBN 978–0–85293–577–4 £72.00

EI 1582 Specification for similarity for API/EI 1581 aviation jet fuel filter/separators*1st ed Feb 2001 ISBN 978–0–85293–576–7 £72.00

GeneralEI 1541 Performance requirements for protective coating systems used in aviation fuel storage tanks and piping*This publication provides guidance on performance requirements for protective coating systems that may be used to coat interior metal surfaces of aviation fuel storage tanks and piping . The standard provides test procedures to determine the effect of a coating on aviation fuel properties and the effect of aviation fuel on the coating . The guidance is applicable to systems for aviation gasolines and jet fuels .1st ed Jul 2009 ISBN 978-0-85293-566-8 £69.00

EI 1594 Initial pressure strength testing of airport fuel hydrant systems with water*Provides recommended practices for the initial pressure strength testing of new aviation fuel hydrant systems, using water as the test liquid . It is applicable to new systems, or to extensions to existing systems where positive isolation can be achieved between the sections . Using water as the test medium, rather than kerosene, is becoming an increasing requirement under local environmental protection legislation .This second edition focuses on methods of dewatering and drying after the system has been tested .2nd ed Dec 2007 ISBN 978–0–85293–569–9 £62.00

EI 1585 Guidance in the cleaning of aviation fuel hydrant systems at airports*Provides guidance in the cleaning of existing hydrant systems that have become contaminated with water, particulate material or microbiological activity .2nd ed Nov 2007 ISBN 978–0–85293–568–2 £95.00

EI 1542 Identification markings for dedicated aviation fuel manufacturing and distribution facilities, airport storage and mobile fuelling equipment*Provides a system for marking aviation fuel types and grades on fuel handling installations and equipment at airports .8th ed Aug 2007 ISBN 978–0–85293–567–5 £62.00

Aviation fuel handlingThere are approximately 4,900 airports in the world that operate scheduled flights . The provision of fuel for the 155,000 commercial jet fuellings a day at these airports forms a significant part of the downstream business for many oil companies, into-plane agents and airlines . An aircraft is fuelled somewhere in the world every 1 .8 seconds!

The aviation technical programme has an international remit, with the majority of publications applicable worldwide . The EI Aviation Committee strives to assist in maintaining and improving what is an impeccable industry safety record . . The majority of the technical work is conducted by the following sub-committees: Aviation fuel filtration; Equipment; Operations; Contamination monitoring; and Hydrant systems .

*Formerly published jointly with API . Technical content remains unchanged


23

Biof

uels

EI Research Report: Review of methods of bonding a hydrant dispenser (servicer) to an aircraft for refuellingCollates all available guidance and regulatory material on the bonding of refuelling equipment to aircraft and documents key differences between the recommended methods or sequences . Provides a technical evaluation of the different methods of bonding of refuelling equipment to aircraft, in terms of the reduction in the level of risk that the method provides for the refuelling operation . It also provides recommendations for a standard bonding sequence that could be followed internationally to provide an appropriate level of safety for the refuelling operation .1st ed Aug 2007 ISBN 978-0-85293-475-3 £72.00

EI 1598 Considerations for electronic sensors to monitor free water and/or particulate matter in aviation fuel*Provides minimum design and functional requirements for electronic sensors for the detection of particulate matter and/or free water in aviation fuel handling systems . This publication is primarily intended to apply to electronic sensors that can be used on vehicles (hydrant servicers/dispensers, carts and

refuellers) in commercial/civilian applications, handling jet fuel or aviation gasoline . It is intended that such sensors would be used in conjunction with filtration equipment .1st ed July 2007 ISBN 978-0-85293-573-6 £72.00

EI 1597 Procedures for overwing fuelling to ensure delivery of the correct fuel grade to an aircraft*Sets out a comprehensive misfuelling prevention program, to assist with maintenance of safety and efficiency .1st ed Dec 2006 ISBN 978-0-85293-570-5 £69.00

EI 1529 Aviation fuelling hose and hose assemblies*6th ed 2005 ISBN 978–0–85293–571–2 £66.00

EI Recommended practice 1540: Design, construction, operation and maintenance of aviation fuelling facilities (Model code of safe practice Part 7)*4th ed Feb 2004 ISBN 978–0–85293–565–1 £111.00

EI 1584 Four–inch hydrant system components and arrangements*(Re-affirmed 2007)3rd ed Apr 2001 ISBN 978–0–85293–572–9 £95.00

BiofuelsThe EI has taken a leading role in researching the impacts that biofuels may have in the distribution chain, with various EI Technical Committees overseeing the development of applicable guidance for distribution and marketing operations, environmental analysis and assessing microbial growth .

To achieve the targets set by the European Directive 2003/30/EC, which promotes the use of biofuels or other renewable fuels to replace part of the diesel and petrol sold in EC Member States, biofuels may be made available in a number of forms, such as pure or high concentration biofuels, or as biofuels blended in mineral oil derivatives in accordance with the appropriate existing European norms . In order to ensure fuel quality where biofuels are used, the EI has also lead the development of appropriate biofuel quality test methods .

Code of practice for a product identification system for petroleum productsThe sixth edition of the code includes identifiers for new product grades (and consequently, identifiers) including unblended bio components (e .g . ethanol, FAME), high blend biofuels (e .g . E85, B50) and ultra low sulfur diesel for use by non-road machinery .6th ed Oct 2008 ISBN 978 0 85293 525 5 £61.00

Guidance for the storage and handling of fuel grade ethanol at petroleum distribution installationsAn essential reference for operators of distribution installations, both in the UK, and elsewhere internationally where fuel grade ethanol and E5 are being handled .1st ed Apr 2008 ISBN 978 0 85293 516 3 £80.00

Guidance for the storage and dispensing of E5 petrol and B5 diesel at filling stationsProvides guidance for filling station operators on the introduction of E5 petrol (EN 228 petrol containing 5 % ethanol), and/or B5 diesel (EN 590 diesel containing 5 % fatty acid methylester (FAME)) .Please see Guidance note for filling station operators on the introduction of E5 petrol and B5 diesel .1st ed Apr 2008 ISBN 978 0 85293 508 8 £12.00

EI literature review. Implications of Biofuels on microbial spoilage and corrosion within the fuel distribution chain and end useReviews the current knowledge base including technical research and operator experience in order that an informed judgment can be made on the existing and potential impact of

microbiologically related problems in fuel distribution, storage, supply and end use associated with a more widespread use of biofuel .1st ed May 2008 ISBN 978 0 85293 514 9 £58.00

EI literature review. Biofuels – potential risks to UK water resources This review presents available and relevant information on road transport biofuels and makes conclusions regarding their potential risks to groundwater in the UK . 1st ed Aug 2008 ISBN 978 0 85293 519 4 £47.00

Presentations from EI Seminar–Preventing jet fuel contamination by FAME – Best practice in the distribution system, 20 Jan, LondonPresentations include the reasons for the introduction of fatty acid methyl ester (FAME) in diesel fuel, industry experience gained from controlled trials of jet fuel/biodiesel fuel handling, jet fuel specification limits and aircraft OEM requirements and an overview of the areas of risk to jet fuel quality .Available to download for free at www.energypublishing.org

Standard test methods relating to FAME, all available individually for £26 .00 from www .energypublishing .org:

IP 547. Fat and oil derivatives - fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)

IP 574. Automotive fuels - fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method


24

Fuel

qua

lity

and

cont

rol IP 578. Petroleum products and fat and oil derivates

- fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography

IP 579. Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method

IP 583. Determination of the fatty acid methyl esters content of aviation turbine fuel using flow analysis by Fourier transform infrared spectroscopy – rapid screening method

IP 585. Determination of fatty acid methyl esters (FAME), derived from bio-diesel fuel, in aviation turbine fuel - GC-MS with selective ion monitoring/scan detection method

IP 590. Determination of fatty acid methyl esters (FAME) in aviation turbine fuel — HPLC evaporative light scattering detector method

IP PM DM. Determination of the oxidation stability of fatty acid methyl esters (FAME) - Rapid small scale oxidation tester method

Standard test methods relating to ethanol, all available individually for £26 .00 from www .energypublishing .org:

IP 538. Determination of the total acidity of ethanol - Colour indicator titration methodIP 539. Determination of water content of ethanol - Coulometric Karl Fischer titration methodIP 552. Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric methodIP 553. Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method

IP 554. Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method

IP 555. Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method

IP 556. Ethanol as a blending component for petrol - Determination of copper content – Graphite furnace atomic absorption spectrometric method

IP 557. Ethanol as a blending component for petrol - Determination of pHe

IP 563. Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method

IP 572: Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method

IP 573. Ethanol as a blending component of petrol - Determination of appearance - Visual method

IP 576: Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method

IP 581. Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)

IP 586. Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity

Fuel quality and controlThe EI is seen as a world class leader in test method development and develops and publishes international standard test methods (known as IP Test Methods) for petroleum and related products . These test methods are used to support government regulations, custody transfer, quality control and international petroleum product specifications across all world regions . The EI Test Method Standardisation Committee works closely with a range of international standards agencies, including CEN, ISO and ASTM and in many cases publishes jointed methods (as dual numbered IP/ASTM test methods or as BS 2000 series methods for EN/ISO test methods) . Covering fuel, lubricants, bitumen and crude oil testing and analysis, these standards are referenced by regulatory authorities and in various MoD product quality control specifications

Many of the IP test methods underpin product quality requirements which have an impact on safety and the environment, in both shipment and use .

In order to assist laboratories in demonstrating data quality and integrity in use of the test methods, the EI also coordinates a range of correlation schemes for testing and analysis to support required laboratory quality assurance (QA) systems .

IP Test methodsIP Standard Methods for analysis and testing of petroleum and related products, and British Standard 2000 Parts, 2011A compilation of Standards based on both traditional and modern instrumentation techniques, published annually . The 2011 edition contains 310 full methods and 15 proposed methods . Changes for the 2011 edition include 14 new full methods (including 4 new European Standards) . IP 323 has

significant changes, and many have minor changes Three volume set . Price includes a searchable CD–ROM of full text, bitumens and artwork .69th ed Feb 2011 ISBN 978-0-85293-599-6 £615.00Individual copies of IP methods and BS Standard 2000 series (including bitumen test methods) can be purchased online at www.energypublishing.org £26.00


25

Fuel

qua

lity

and

cont

rolModel code of safe practice Part 11: Bitumen safety

code4th ed Nov 2005 ISBN 978–0–85293–402–9 £90.00

Guidance on development, implementation and improvement of quality systems in petroleum laboratoriesThis publication aims to provide a practical guide for those establishing a quality system in their laboratory, or to provide them with a means of ensuring that the quality system they have in place meets well established quality standards . It has been produced to enable a wide range of laboratory personnel to appreciate the requirements of a robust quality system without needing to have expert knowledge .1st ed Jan 2010 ISBN 978-0-85293-552-1 £71.00

Guide to IP test method equivalenceGuidance on the relationship between IP methods and those published by ISO, CEN, ASTM, DIN, AFNOR and JIS is available online through the EI website: www .energyinst .org/test-methods .

Code of practice for communicating changes to apparatus specified in IP Test MethodsProvides a framework for manufacturers to communicate proposed significant changes to equipment to the EI and for the relevant Test Method Panel to assess the impact of the change . The document includes a diagram of the recommended procedure, expected levels of reporting and, where possible, proof of equivalence . An ‘Apparatus Change Notification’ model form is also included . This new publication is available free online, or can be purchased as a printed book .1st ed May 2008 ISBN 978-0-85293-520-0 £15.00

Aviation fuel qualityThe quality of aviation fuel available in the United Kingdom annual survey 2008Contains a summary of the data relating to the properties of AVTUR supplied in the UK during 2007 that are specified in DEF STAN 91-91 (specification for AVTUR) . Also available free online at: www .energyinst .org

Multi–product pipelines: minimum criteria to determine additive acceptability2nd ed Apr 2001 ISBN 978–0–85293–327–5 £61.00

Laboratory health and safetyCFR installation and operation: Health and safety guidelinesThis publication aims to provide guidance on how to comply withspecific health, safety, maintenance and environmental requirements within the CFR installation and operating environment . Comprehensive information is provided starting from initial requirements to consider when deciding where to locate a CFR facility through to the mitigation of hazards when operating or maintaining a CFR engine for testing of fuels .1st ed Mar 2010 ISBN 978-0-85293-551-4 £71.00

Model code of safe practice Part 11: Bitumen safety codeProvides guidance for those responsible for design, maintenance and operation of bitumen handling plant and the product users of the bitumen industry .4th ed Nov 2005 ISBN 978–0–85293–402–9 £90.00

Laboratory correlation schemesParticipating in EI correlation schemes can form a fundamental part of any petroleum laboratory’s QA system .

It is a requirement for laboratories accredited to ISO 17025 to participate in interlaboratory comparison or proficiency testing programmes . Being a member of a recognized scheme provides laboratories with a means to demonstrate their ability to meet

high level standards to customers on the performance of the laboratory and the integrity of the results generated .

EI Laboratory correlation scheme (EILCS)The EILCS offers laboratories the opportunity to check their performance on a monthly basis using a variety of commercially available petroleum products forming an important part of any petroleum laboratory’s QA procedure .Laboratories can test up to 3 of the following products per month: gasoline, diesel, jet fuel, naphtha, fuel oil and crude oil .Each laboratory receives a monthly and anonymously-coded report that enables laboratories to evaluate their performance at a quick glance . New participants have the option to enrol for a 6 month trial period . For further information contact e: eilcs@energyinst .org

Inter centre precision monitoring scheme (ICPMS)The EI is now running the BP Inter centre precision monitoring scheme, established for over 35 years with more than 30 participating laboratories . Products available for testing are: kerosene; fuel oil; gas oil; motor gasoline; and bitumen .For further details of membership pleas contact icpms@energyinst .org

IP Gasoline and diesel fuel engine correlation scheme (CFRCS)Laboratories conducting tests for the assessment of automotive fuel quality must be a member of an inter-laboratory correlation scheme . Membership of the IP Gasoline and diesel fuel engine correlation scheme enables laboratories to meet this requirement for both petrol and diesel fuel engines .Samples of gasoline or reference blends are tested for both research and motor octane number and diesel fuel for cetane number . Results are statistically analysed and published monthly enabling laboratories to compare their results with the statistical mean . In addition, a yearly results report is issued .For further details of membership please contact e: cfrcs@energyinst .org

IP Derived Cetane Number correlation scheme (DCNCS)This scheme is run parallel to and uses the same specially blended diesel fuels that are used for the Gasoline and diesel fuel engine correlation scheme . The scheme enables laboratories determining the Derived Cetane Number (DCN) of diesel fuels by either IP 498 or IP 567 to:• Compare their results against those determined by other users• Compare the DCN to the mean of that Cetane Number

(CN) as determined by IP 41/ASTM D613 in the Gasoline and diesel fuel engine correlation scheme

• Have a set of secondary working standards with known DCN and CN values that can be used for quality control measurements

For further details of membership please contact e: dcncs@energyinst .org

IFIA/EI Petroleum inspector certification programmeAs part of the inspection industry’s continuous improvement efforts the International Federation of Inspection Agencies (IFIA) has an Inspector certification programme that is operated worldwide . Candidates must demonstrate that they have met the IFIA training requirements and pass an examination, which is valid for a five-year period .The programme is monitored by a technical advisory board and overseen by the Energy Institute . For further information on examinations (excl . the Americas) please contact IFIA on e: petcomadmin@ifia-federation .org For further information on examinations held in North and South America please contact IFIA AC on e: ifianac@aol .com


26

Hyd

roca

rbon

man

agem

ent

HM 80. Model terms and conditions for free on board (FOB) sale and purchase of crude oilThe GTC (General Terms and Conditions) Hydrocarbon Trading Committee was established with the purpose of developing and maintaining voluntary standard GTCs for hydrocarbon physical trades on behalf of the wider trading community .1st ed Oct 2010 ISBN 978-0-85293-510-1 £92.00EI HM 56/API MPMS Technical report 2570 Continuous on-line measurement of water content in petroleum (crude oil and condensate) This technical report provides guidance for the application, installation, operation, verification, and proving of OWDs for use in the non-custody transfer measurement of water in crude oil and condensate . 1st ed Oct 2010 ISBN 978-0-85293-585-9 £46.00HM 65. Atmospheric hydrocarbon emissions from marine vessel transfer operations1st ed Sep 2009 ISBN 978-0-85293- 539-2 £77.00HM 39 A guide to recommended measurement practice for compliance with the requirements of HMRC Notice 1791st ed Aug 2009 ISBN 978-0-85293-542-2 £67.00HM 52. Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment1st ed May 2009 ISBN 978-0-85293-538-5 £59.00HM 50. Guidelines for the cleaning of tanks and lines for marine tank vessels carrying petroleum and refined productsFree online at www .energypublishing .org .1st ed Apr 2009 ISBN 978-0-85293-528-6 £41.00HM 51. Procedure for bulk liquid chemical cargo inspection by cargo inspectors1st ed Sep 2008 ISBN 978-0-85293-518-7 £75.00HM 58. Guidelines for determination of flare quantities from upstream oil and gas facilities1st ed Jun 2008 ISBN 978-0-85293-517-0 £84.00HM 32. Guide to product hydrocarbon management at petroleum product marketing and distribution terminals(formerly PMM Part XVIII)2nd ed Nov 2007 ISBN 978–0–85293–491–3 £95.00HM 55. Measurement of refrigerated and/or pressurized cargoes on board marine gas carriers. Liquified petroleum and chemical gases1st ed Nov 2007 ISBN 978–0–85293–500–2 £53.00HM 60. Guidelines for the auditing of measurement systems for oil and gas streams1st ed Nov 2007 ISBN 978–0–85293–484–5 £69.00HM 53. Management of emissions trading for UK upstream oil and gas1st ed Apr 2007 2007 ISBN 978–0–85293–470–8 £69.00

HM 54. Guidelines for the management of measurement for the UK upstream oil and gas industry1st ed Mar 2007 ISBN 978–0–85293–471–5 £69.00

HM 49. Vessels experience factor1st ed 2005 ISBN 978–0–85293–449–6 £84.00

HM 40. Guidelines for the crude oil washing of ships’ tanks and the heating of crude oil being transported by sea(replaces PMP No . 8) This publication can be downloaded free of charge from the EI website: www .energypublishing .org2nd ed Jun 2004 ISBN 978–0–85293–422–7 £41.00

HM 31. Guide to hydrocarbon management in petroleum refinery operations(replaces PMM Part XVII)2nd ed May 2004 ISBN 978–0–85293–415–9 £106.00

HM 29. Procedures for oil cargo measurements by cargo surveyors. Section 2: Products(formerly PMM Part XVI, S2)1st ed 2004 ISBN 978–0–85293–416–6 £94.00

HM 47. Meter proving. Section 13: Recommended Operational Practice for Proving LPG Meters(formerly PMM Part X, S13)1st ed 2003 ISBN 978–0–85293–398–5 £94.00

HM 48. Meter proving. Code of practice for the proving of loading gantry metersReplaces HM 37 .1st ed 2003 ISBN 978–0–85293–407–4 £62.00

HM 27. Metering systems. Section 2: Guide to gas metering systems(formerly PMM Part XV, S2)2nd ed 2002 ISBN 978–0–85293–360–2 £94.00

HM 34. List of data required for a comprehensive evaluation of a liquid flowmeter(formerly PMP No. 1)2nd ed 2002 ISBN 978–0–85293–380–0 £68.00

HM 45. Statistical control of volumetric metering systems using meter control charts – simplified method(formerly PMP No . 14)1st ed 2002 ISBN 978–0–85293–381–7 £68.00

HM 46. Guidance notes on the application and performance of small volume provers (formerly PMP No . 15)1st ed 2002 ISBN 978–0–85293–382–4 £68.00

HM 18. Meter Proving. Section 10: Recommended UK operational practice For proving turbine meters in loading gantries(formerly PMM Part X, S10)1st ed 2001 ISBN 978–0–85293–344–2 £68.00

Hydrocarbon managementAt various stages during the extraction, transportation, refining, storage and distribution of petroleum and its products, there are requirements to measure its quantity for allocation, custody transfer and fiscal purposes, as well as for stock control and loss prevention .

To enable the oil industry and regulators to carry out such measurements in a standardised manner, the EI Hydrocarbon Management Committee (HMC) develops and issues publications that reflect current industry best practice . The EI HMC manages the work programme covering upstream hydrocarbon management, refineries loss control, marketing and distribution, petroleum measurement and cargo inspection and oil transportation measurement .

Since the signing of the Phoenix Agreement in 2006, the EI and the API have been working together to produce joint API/EI standards in many areas of petroleum measurement . The standards are published jointly by the two organisations and are then generally made available for adoption by International Organization for Standardization (ISO) .

EI Hydrocarbon Management Expert RegisterThe EI HMC has set up an expert register, which is a database of experts in various fields relating to hydrocarbon management . The database is used for contacting appropriate users about volunteering to work on joint standards, working groups, committees and for ballots etc . relating to specific categories . For more information, visit www .energyinst .org/technical/hydrocarbon-management


27

Hyd

roca

rbon

man

agem

ent

HM 28. Procedures for oil cargo measurements by cargo surveyors. Section 1: Crude oil(formerly PMM Part XVI, S1)2nd ed 2001 ISBN 978–0–85293–334–3 £94.00HM 41. The performance of turbine meters in loading gantries – A review of proving and test data(formerly PMP No . 9) Supplement to HM 18 .1st ed 2001 ISBN 978–0–85293–343–5 £57.00HM 44. Guidelines for the development of uncertainty estimates for pipe prover calibrations(formerly PMP No . 12)1st ed 2001 ISBN 978–0–85293–214–8 £70.00HM2. Tank calibration. Section 1: Strapping, internal diameter and internal offset methods for the calibration of vertical cylindrical tanks(formerly PMM Part II, S1)2nd ed Sep 2000 ISBN 978–0–85293–228–5 £95.00HM 20. Meter Proving. Section 12: Aviation Fuelling Positive Displacement Meters(formerly PMM Part X, S12)1st ed 2000 ISBN 978-0-85293-302-2 £93.00Research Project. Evaluation of the performance of meters in loading gantries. Phase 2 – Tests on products other than gas oil1st ed 2000 ISBN 978–0–85293–349–7 £31.00HM1. Calculation of oil quantities (formerly PMM Part I)2nd ed Jul 1999 ISBN 978–0–85293–212–4 £106.00HM 16. Meter Proving. Section 7: Calibration of reference meters used for gantry meter proving. Sub–section 7.2: volumetric and gravimetric tank methods(formerly PMM Part X, S7 .2)1st ed 1999 ISBN 978–0–85293–270–4 £87.00HM19. Meter Proving. Section 11. Guidelines for field tests and verification of temperature measuring equipment on loading gantries (for non–artificially heated products)(formerly PMM Part X, S11)1st ed 1999 ISBN 978–0–85293–245–2 £72.00HM 30. Procedures for oil cargo measurements by cargo surveyors. Section 3: Liquefied Petroleum Gas(formerly PMM Part XVI, S3)1st ed 1999 ISBN 978–0–85293–229–2 £94.00HM 42. Vocabulary of dynamic measurement(formerly PMP No . 10)1st ed 1999 ISBN 978–0–85293–267–4 £70.00HM 43. Temperature corrections in tank calibration and gauging(formerly PMP No . 11)1st ed 1999 ISBN 978–0–85293–252–0 £70.00HM4. Manual measurement of level in tanks. Section 1: Non–electrical methods(formerly PMM Part III, S1)1st ed 1998 ISBN 978–0–85293–197–4 £95.00HM 21. Static and dynamic measurement of light hydrocarbon liquids. Section 1: Calculation procedures(formerly PMM Part XII, S1)2nd ed 1998 ISBN 978–0–85293–210–0 £89.00HM 23. Fidelity and security of measurement data transmission systems. Section 1: Electric and/or electronic pulsed data cabled transmission for fluid metering systems(formerly PMM Part XIII, S1)2nd ed 1998 ISBN 978–0–85293–235–3 £65.00HM8. Density, sediment and water. Section 2: Continuous density measurement(formerly PMM Part VII, S2)2nd ed Sep 1997 ISBN 978–0–85293–175–2 £98.00HM 17. Meter Proving. Section 8: Calibration of additive injection systems for road loading gantries(formerly PMM Part X, S8)1st ed 1997 ISBN 978–0–85293–180–6 £72.00HM3. Tank calibration. Section 7: Calibration of underground tanks at filling stations(formerly PMM Part II, S7)1st ed 1996 (reapproved 2001) ISBN 978-0-85293-169-1 £95.00

HM7. Density, sediment and water. Section 1: General guidance on test methods (formerly PMM Part VII, S1)1st ed 1996 ISBN 978–0–85293–154–7 £72.00

HM9. Meters. Section 3: Guidance notes for the installation of turbine meters on loading gantries(formerly PMM Part IX, S3)1st ed 1996 (reapproved 2001) ISBN 978–0–85293–172–1 £68.00

HM 15. Meter Proving. Section 7: Calibration of reference meters used for gantry meter proving. Sub–section 7.1: calibration using a small volume prover(formerly PMM Part X, S7 .1)1st ed 1996 ISBN 978–0–85293–171–4 £68.00

HM 25. Part XIV: Statistics for static and dynamic measurement(formerly PMM Part XIV)2nd ed 1993 ISBN 978–0–85293–132–5 £138.00

HM 38. User guidelines for standard temperature accounting (formerly PMP No. 5)1st ed 1993 (reapproved 1996) ISBN 978–0–85293–133–2 £67.00

Tank calibration. Section 5A: Calibration of barge tanksJoint API/EI . Available from API as Manual of Petroleum Measurement Standards Chapter 2: Section 7 .1991 (reapproved 1996)

Tank calibration. Section 5B: Calibration of tanks on ships and oceangoing bargesJoint API/EI . Available from API as Manual of petroleum measurement standards Chapter 2: Section 8A1991 (reapproved 1996).

HM 14. Meter Proving. Section 5: Recommended UK operational practice for proving gantry meters fitted with electronic heads(formerly PMM Part X, S5)1st ed 1991 (reapproved 1996) ISBN 978–0–471–93198–0 £94.00

HM10. Meter Proving. Section 1: Field guide to proving meters with a pipe prover(formerly PMM Part X, S1)1st ed 1989 (reapproved 2001) ISBN 978–0–471–92313–8 £90.00

HM12. Meter Proving. Section 3: Code of practice for the design, installation and calibration of pipe provers(formerly PMM Part X, S3)1st ed 1989 (reapproved 2001) ISBN 978–0–471–92231–5 £94.00

HM13. Meter Proving. Section 4: Recommended UK practice for testing, operating and maintaining road tanker metering systems(formerly PMM Part X, S4)1st ed 1988 (reapproved 1996) ISBN 978–0–471–92012–0 £94.00

HM 36. Computer implementation procedures for correcting densities and volumes to 20°C(formerly PMP No . 3)1st ed 1988 ISBN 978–0–85293–117–2 £56.00

HM 26. Metering systems. Section 1: A guide to liquid metering systems(formerly PMM Part XV, S1)1st ed 1987 (reapproved 1998) ISBN 978–0–471–91693–2 £94.00

HM 33. ASTM–EI–API Petroleum measurement tables for light hydrocarbon liquids – Density range 0.500 to 0.653 kg/litre at 15°C1st ed 1986 ISBN 978–0–471–90961–3 £89.00

HM11. Meter Proving. Section 2: Recommended UK operational practice for proving gantry meters(formerly PMM Part X, S2)1st ed 1985 (reapproved 1996) ISBN 978–0–471–90916–3 £80.00

HM 24. Fidelity and security of measurement data transmission systems. Section 3: Electrical and/or electronic data capture systems for flow metering(formerly PMM Part XIII, S3)1st ed 1985 ISBN 978–0–471–90962–0 £74.00

HM 35. Guidelines for users of the API–ASTM–EI petroleum measurement tables (formerly PMP No . 2)1st ed 1984 ISBN 978–0–85293–118–9 £57.00

HM 22. Static and dynamic measurement of lighthydrocarbon liquids. Section 3: Instrumentation for primary measurement(formerly PMM Part XII, S3)1st ed 1983 (reapproved 1997) ISBN 978–0–471–26282–4 £65.00


28

Con

f. p

roce

edin

gs/P

ublis

hing

par

tner

s

Conference proceedingsEI Conference proceedings For other conference proceedings visit www .energyinst .org

2nd International Oil and Gas Conference. Managing Risk – Dispute Avoidance and ResolutionThe conference featured a range of distinguished speakers and major international figures from the oil an d gas industry, international law firms and the international arbitration and justice communities . This CD-Rom contains the presentations and details of the speakers at this event . Post-conference comments and reviews are also included .2nd ed Nov 2007 ISBN 978-0-85293-492-0 £180.00

WPC Congress ProceedingsThe World Petroleum Council serves as a forum for scientists, technical personnel, economists and management in the oil industry . The trends and outlooks integral to the future success of the industry form the focus of discussions, forums and presentations throughout the Congress . The presentations explore international business opportunities, exchange ideas on global issues, and provide the latest information on technology, business management and industry developments .Individual papers are also available online at www.energypublishing.org

Proceedings of the 19th World Petroleum Congress, Madrid, Spain, 29 June–3 July 2008 The 19th WPC Congress proceedings will be available in a fully searchable electronic format on DVD and include the papers and presentations of:• Plenaries and keynote speeches• Review and forecast papers• Technical forum papers and poster sessions• Social responsibility seminar• Water• Special sessions• Co-operation between oil producers and service companies• Round tables• Opening and closing ceremonies, event videos, and more1st ed Nov 2008 ISBN 978–0–85293–499–9 £650.00

Proceedings from the 18th World Petroleum Congress, Johannesburg, SA, 2005DVD Format 1st ed 2005 ISBN 978–085293–450–0 £650.00

Proceedings from the 17th World Petroleum Congress, Brazil, 20021st ed 2002 978-0-85293-369-5 £325.00

North Sea Flow Measurement Workshop Proceedings

Copies of previous editions are also available from Portland Customer Services

28th International North Sea Flow Measurement Workshop1st ed Nov 2010 ISBN 978-0-85293-586-6 £175.00

27th International North Sea Flow Measurement Workshop1st ed Oct 2009 ISBN 978-0-85293-543-9 £175.00

26th International North Sea Flow Measurement Workshop1st ed Nov 2008 ISBN 978-0-85293-501-9 £175.00

Tekna Conference Proceedings21st International oil field chemistry symposium1st ed Mar 2010 ISBN 978-0-85293-559-0 £175.00

20th International oil field chemistry symposium 1st ed Mar 2009 ISBN 978–0–85293–534-7 £175.00

19th International oil field chemistry symposium 1st ed Mar 2008 ISBN 978–0–85293–503-3 £175.00

EI Publishing PartnershipsThe EI has developed successful publishing partnerships with a number of organisations worldwide, including the American Publishing Institute (API), BSI, Croner, CGES, CIBSE, Elsevier, the Environment Agency (EA), the Health and Safety Executive (HSE), Institution of Gas Engineers and Managers (IGEM), John Wiley, Shell E&P, UK Oil and Gas (UKOG), and the World Petroleum Council (WPC) . If you would like to learn more about the benefits of working with the EI to promote and sell your publications and related products and services, please contact the publishing team, e: [email protected]

Modern petroleum technologyModern petroleum technologyModern Petroleum Technology (MPT) is widely recognised as the most authoritative, concise and comprehensive overview of technical expertise employed across the international oil and gas industry . This vital information is of use to analysts, strategists, lecturers and students, consultants, legal and financial providers . The work is organised into chapters covering Upstream and Downstream technology . Upstream examines the different stages of the exploration and production processes involved in the location and extraction of raw materials including latest applications employed in seismic technology and the production of heavy oils . Downstream covers the process of refining, as well as the production and supply of the end product, from refineries to filling stations . MPT considers both innovations in technology and the business and environmental issues surrounding its practical application . Written by leading international experts from industry and academia, MPT explores the current challenges and opportunities presented by new technology, enabling everyone in industry – from chief executive to new recruit – to stay in touch with developments within and outside their own area of expertise .

MPT is available to download in a chapter by chapter format at: www.energypublishing.org MPT is available in printed book form from Wiley (www .wiley .com)6th ed 2000 (2 vol set) ISBN 978–0–471–98411–5 £620.00Volumes are also available for purchase individually

Centre for Global Energy Studies (CGES)

CGES provides independent, objective and comprehensive oil market analysis and publishes specialist studies, reports and oil market subscription publications . The latest reports issued by CGES are now also available from the EI with a 10% discount to EI Members . Visit www.energypublishing.org for more information .

Oil product price report £90.00

Monthly oil report £85.00

CGES Annual oil market forecast and review 2008 £650.00

CGES Oil market prospects £85.00

CGES Global oil report £260.00

Institution of Gas Engineers and Managers (IGEM)

The majority of IGEM publications relate to how to comply with aspects of relevant legislation such as the Pipelines Safety Regulations, the Gas Safety (Installation and Use) Regulations, the Dangerous Substances and Explosive Atmospheres Regulations, etc . and, equally, the majority are recognised by regulatory bodies such as HSE, Ofgem and CORGI as ‘appropriate standards’ as referred to in such legislation .

IGE/GL/8 EDITION 2 (Communication 1721) £96.00Reporting and investigation of gas-related incidents

IGE/SR/10 EDITION 2 (Communication 1661) £61.00Dealing with escapes of gas into underground plant

IGE/SR/15 EDITION 5 (Communication 1746) £105.00Integrity of safety-related systems in the gas industry


29

Con

f. p

roce

edin

gs/P

ublis

hing

par

tner

s

IGE/SR/18 EDITION 2 (Communication 1678) £61.00Safe working practices to ensure the integrity of gas pipelines and associated installations

IGE/SR/20 EDITION 2 (Communication 1650) £61.00Dealing with reported gas escapes

IGE/SR/24 (Communication 1655) £77.00Risk assessment techniques

IGE/SR/25 EDITION 2 (Communication 1748) £160.00Hazardous area classification of natural gas installations

IGE/SR/28 (Communication 1680) £116.00Trenchless techniques

IGE/TD/4 EDITION 4 (Communication 1725) £157.00PE and steel gas services and service pipework

IGE/UP/1 EDITION 2 (Communication 1716) £105.00Strength and tightness testing and direct purging of industrial and commercial gas installations

Chartered Institution of Building Services Engineers (CIBSE)A selection of energy related titles published by CIBSE are now available, with a 20% discount for EI members . Visit www.energypublishing.org for further information on these titles:

CIBSE Knowledge Series:Commissioning variable flow pipework systems £42.00Comfort £42.00Refurbishment for improved energy efficiency £42.00Understanding controls £42.00 Variable flow pipework systems £42.00 Sustainable low energy cooling: an overview £42.00 Biomass heating £42.00 Capturing solar energy £46.00Making buildings work £42.00 How to design a heating system £42.00 Green roofs £42.00 Managing your building services £42.00 Reclaimed water £42.00 Refrigeration £42.00

CIBSE Guide Series:A: Environmental design £110.00 B: Heating, ventilating, air conditioning & refrigeration £100.00C: Reference data £100.00 D: Transportation systems in buildings £67.00E: Fire engineering £92.00F: Energy efficiency in buildings £117.00G: Public health engineering £92.00 J: Weather, solar and illuminance data (CD-ROM) £170.44K: Electricity in buildings £94.00 L: Sustainability £52.00 M: Maintenance engineering and management £94.00

Croner Energy ManagementIn the current economic and environment conscious climate, staying up-to-date with all the latest developments in energy management, best practice and legislation is essential .

Whether it is to improve your energy efficiency or to ensure you are well prepared for changes in the law, Croner Energy Management, published in association with the Energy Institute, can offer insight, interpretation and practical advice to put you on the right track .

The annual subscription will give you access to a loose-leaf publication with two updates per year, as well as a monthly newsletter which keeps you up-to-date with energy-related news, upcoming legislation, practical articles and degree day data .

The loose-leaf publication is organised into structured sections, including detailed information on the following .• Identifying opportunities for energy management,

including setting up management structures, performing energy surveys, training energy managers and the principles of investment in energy saving measures .

• Energy management for local authorities .• European and UK legislation, guidance, standards and

accreditation, and grants and financial aid .• Advice on practical energy efficiency, including sections

on monitoring and targeting, lighting, space heating, heat loss from buildings, transport management, and recycling energy .

Annual subscription: Full price £323 .95 (inc VAT and P&P)To order, visit www .croner .co .uk/ei or call 0845 4501306, quoting reference UQ/PO34808 .

Transport fuels technology

Essential source material for scientists and engineers interested in transport fuel science and technology, as well as librarians, information scientists, managers and planners .

Transport Fuels TechnologyEd . Eric Goodger . Types, production, properties, testing, handling and performance of conventional and alternative fuels for road, rail, sea and air transport .1st ed Oct 2000 ISBN 978–0–9520186–2–9 £40.00

TFT Update ServiceContinuously updated and published on the EI website, accessible to subscribers via a customer password or by quarterly email delivery direct to your desktop . Delivers carefully selected abstracts from worldwide literature, including technical journals, conference proceedings, special reports, books and databases . Bibliographic and reference details are provided to assist with further study where needed . The correlated papers for the period 2000 to 2004 are available as a free pdf to anyone subscribing to the TFT Update Service .Annual subscription rate £195.00To subscribe, e: [email protected]

The first and second centuries of aerospace fuelsAuthor: Eric Goodger . Covers the origins of the oil and aviation industries, discovery of anti-knock additives and the creation of the super 100/150 grade aviation gasoline . The work concludes with a survey of systems for deep space propulsion, plus predictions for likely developments within the second century of aerospace fuels . Published by Landfall Press . To order, contact: egoodger@waitrose .com1st ed 2007 ISBN 978–0–9520186–4–0 £15.00

Transport fuelling update on alternativesEd . Eric Goodger . Outlines all the contenders in the alternative fuel scene . Tabulated and plotted data compare the properties of representative members of each group with those of the conventionals, concluding with notes on recent developments and applications, fully indexed with the relevant literature sources . Published by Landfall Press . To order, contact: [email protected] ed 2006 ISBN 978–0–9520186–3–6 £15.00


30

EI M

agaz

ines

and

jour

nals EI Magazines and journals

MagazinesPetroleum ReviewA monthly journal that will help keep you up-to-date and fully informed of the latest advances, trends, changes and events throughout the international oil and gas industry – upstream and downstream . The magazine’s long-established association with leading oil companies and industry figures enables it to regularly feature articles by and about key decision-makers . It remains one of the few industry magazines to provide a comprehensive overview of the oil and gas industry – from seismic surveys to forecourt retailing . 12 issues per annum, plus supplements .UK subscriptions £250.00Overseas subscriptions (airmail) £420.00Single copy sales £22.00

Energy WorldEssential reading for everyone working or studying in the field of energy, Energy World is a current affairs magazine published by the Energy Institute 11 times a year . Each issue is packed with news and information covering the entire energy field; from exploration and generation to energy management and renewables . It includes: industry news and developments; features on new technology, business and people; training and careers information; recruitment opportunities . 11 issues per annum (double summer issue) plus supplements . UK subscriptions £165.00Overseas subscriptions (airmail) £270.00Single copy sales £18.00

EI magazine supplementsThe EI produces a number of themed magazine supplements each year, tailored to a targeted audience . They are distributed with Petroleum Review and Energy World and can be purchased on an individual basis . In 2010 the EI published the following supplements:

UK Retail Marketing Survey Providing detailed statistical information regarding the UK fuel retail sector, on a company, regional and fuel product basis . Published annually £60.00

Future Skills Looking beyond reports of skills shortages in many parts of the energy industry, both in the UK and further afield, and to reach towards solutions based on education, training, continuing professional development and specialist recruitment .Published annually £40.00

Future Refining and Storage Taking a closer look at the fortunes of the global oil refining sector, which has seen a significant restructuring programme over the past year in response to the global economic crisis and subsequent fall in worldwide oil products demand, coupled with continued investment in refinery capacity additions . Independent terminal operators have not been so badly affected during the recent economic downturn but they are acutely aware of the issues surrounding the future profile of the worldwide refining sector, as refiners are among their biggest clients .Published annually £40.00

EI Awards Every year, the Energy Institute Awards recognise individuals and organisations in the global energy industry for setting new standards of excellence and innovation in their daily activities . The Awards supplement profiles each year’s winning projects and runners up . Published annually £20.00

The Energy Institute Yearbook and Directory 2011 The annual Energy Institute Yearbook and Directory is a highly regarded reference guide that provides up-to-date information to help you with any energy-related enquiry/activity . The 2011 edition provides unrivalled coverage of topical issues in the energy industry, with editorial contributions from leading energy figures featuring alongside a comprehensive directory of suppliers of energy products and services, training organisations, and consultants . Information on energy courses and other Energy Institute services are also included . Order your copy of the Energy Institute Yearbook and Directory 2011 and gain access to a wide range of potential customers, suppliers and business partners .Published annually £40.00

Please contact our Library and Information Services on lis@energyinst .org to order any of the following:• Annual subscriptions for Petroleum Review and Energy

World .• Single copies of Petroleum Review and Energy World .• Single copies of the EI supplements .• The Energy Institute Yearbook and Directory 2011 .

EI members receive a complimentary subscription to either Petroleum Review or Energy World as part of their annual membership to the EI, and can purchase the alternative magazine at reduced rates . Please contact Membership on membership@energyinst .org for further information .

JournalsThe Journal of the Energy InstituteThe coverage of the Journal of the Energy Institute reflects changes in energy technology that result from the transition to more efficient energy production and end use together with reduced carbon emission . This EI journal offers high quality peer-reviewed coverage of issues relevant to energy industry professionals globally .Areas of interest include:• Combustion engineering• Petroleum engineering• Emissions and environmental pollution control• Alternative energy sources• Energy conversion, recovery and efficiency• Space heating• Energy storage and transmissionPublished quarterly . For more information, see outside back cover .

Fuel and Energy AbstractsThis extensive resource keeps researchers up-to-date with new developments in the energy field . Published in association with Elsevier, each issue of Fuel and Energy Abstracts comprises more than 800 abstracts from international publications, covering topics as diverse as solid fuels, liquid fuels, gaseous fuels, fuel by-products, nuclear fuels, electrical power supply and utilisation, alternative energy sources, hydrocarbons, steam raising, combustion, engines, process heating, power and incineration, refractories/ceramics, space heating and cooling, heat pumps, environment, fuel science and technology, energy, energy conversion and recycling . EI Members qualify for a 15% discount on the subscription price . For more details, visit www .elsevier .com or contact the EI publishing team, e: pubs@energyinst .org


31

EI Library and information service (LIS)

The Energy Institute holds one of the most comprehensive collections of published material on all aspects of oil, gas and other energy industries which is readily accessible in the UK . Contact the LIS team or see the website for a list of charges .

Hours: 9 .15am–5 .00pm, Monday–Friday (excl Bank Holidays)

t: +44 (0)20 7467 7111/7114/7115 f: +44 (0)20 7255 1472 e: lis@energyinst .org www .energyinst .org

The library collection• Directories• Periodicals, Journals, Magazines• Abstracts• Conference Proceedings (e .g . OTC)• Books/pamphlets on all energy related subjects• Standards• Statistical publications• CD–ROMs

Library services• Loan of non–reference material to EI Members• Reference facilities• Photocopying service (visitors may do their own copying by

purchasing photocopy cards)• Free internet access and WiFi access to internet

Information servicesIf you have a requirement for information on any aspect of the energy industries contact the LIS . Your query will be dealt with promptly and in strict confidence . Each year the department handles over 15,000 queries, ranging from very specific questions, which may be answered immediately, to those requiring an evaluative review of the information resources on a particular subject . Our services include:

Online search: we have access to commercially available on–line databases via Dialog, including those produced by the University of Tulsa (on the upstream oil industry) .

Quick queries: answered free (up to 5 minutes) e .g . address and telephone numbers; petrol pump prices; statistics .Extended research: e .g . for detailed information on companies; statistics; oil industry operations .

EI Member Consultant directories

There are two types of consultant directories accessible online - registered EI member energy consultants and EI members offering consulting services . Inclusion in the directories is exclusive and free to EI members . Visit the EI website or contact the LIS for more information .

Register of Energy Consultants Fully searchable electronic database of over 200 accredited consultant members of the EI who have expertise in a variety of energy topics, mainly around energy efficiency and energy management . It provides consumers with confidence that they are approaching consultants whose skills and experiences have been independently validated by the Energy Institute against robust criteria . Available free of charge on the EI website www .energyinst .org .

EI Member Consultants’ listFully searchable electronic database of over 130 EI member consultants . This is updated continually and covers over 200 subjects concerning the international petroleum and energy industries . Available free of charge on the EI website www .energyinst .org .

EI statistics

EI Data service‘Energy Statistics - ENSTAT’ and ‘Petroleum Statistics Service - PETSTAT’ are now encompassed in this new service . Covering the energy industries (including renewables - wind, wave, solar, geothermal, biomass, electricity, coal and nuclear, oil and gas) the service comprises over 50 datasheets including:

• Contact details• Prices and taxation• Fact sheets• Statistics – eg production, reserves, consumption• and other useful information

EI Members can access the entire service for free via the EI website www .energyinst .org . Non EI members can subscribe to the EI data service from just £100 a year . Some datasheets (e .g . monthly UK petrol prices) can be subscribed to individually .

For more information, please contact:Emily Heath, LIS OfficerLibrary and Information Servicet: +44 (0) 20 7467 7115 e: lis@energyinst .org

Libr

ary

& In

form

atio

n/H

ow t

o or

der


32

Inde

x

Index

A critical review of current biological monitoring techniques for the assessment of exposure to low levels of benzene . . . . . . . . . . . . . 9

A model syllabus for the training of technicians involved in the examination, testing, maintenance and repair of petroleum road tankers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

A model written scheme for the examination, testing and certification of petroleum road tankers . . . . . . . . . . . . . . . . . . . . 20

A recommended fitness standard for the oil and gas industry . . . .3,8

A risk–based approach to hazardous area classification . . . . . . . 14

Additional requirements to ‘A model written scheme for the examination, testing and certification of petroleum road tankers’ for ADR tankers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Air quality and its association with human health effects – an update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Air quality and its association with respiratory disease . . . . . . . . . . . 9

An assessment of electrostatic ignition risks and filling rules for loading road tankers with low sulphur diesel . . . . . . . . . . 15,19,20

API/EI Research report: Verification of lightning protection requirements for above ground hydrocarbon storage tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,15,18

Application of Control of Substances Hazardous to Health (COSHH) requirements for carcinogens at oil refineries and terminals . . .9,19

Aseptic bone necrosis in commercial divers . . . . . . . . . . . . . . . . . 9

Booming in oil spill contingency planning . A guidance document for developing operational coastal estuarine booming plans in the United Kingdom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Capability maturity model for maintenance management . . . . . 16

CFR Installation and operation: Health, safety, maintenance and environmental protection guidelines . . . . . . . . . . . . . . . . . . . . .5,25

Code of practice for a product identification system for petroleum products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,20,23

Code of practice for communicating changes to apparatus specified in IP Test Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Code of practice for drivers’ emergency actions on road loading racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Code of practice for entry into underground storage tanks at filling stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Code of practice for metalworking fluids . . . . . . . . . . . . . . . . . . . 7

Code of practice for petroleum road tanker vapour collection systems and equipment used in unloading operations . . . . . . . . 19

Code of practice for the development of a response plan for significant incidents involving petroleum product road tankers . . 20

Code of practice for the safe handling of drilling fluids . . . . . . . . 9

Code of safe practice for contractors and retailers managing contractors working on filling stations . . . . . . . . . . . . . . . . . . .4,20

Compression fittings and small bore tubing awareness for downstream oil and gas (e learning course) . . . . . . . . . . . . . .13,16

Controlling the risks from static electricity . . . . . . . . . . . . . . . . . 15

Corrosion threats handbook–Upstream oil and gas production plant (A5)/(A6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12,16

Design, construction and operation of workshops for petroleum road tanker maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Design, construction, modification, maintenance and decommissioning of filling stations . . . . . . . . . . . . . . . . . . . . .20,21

EI 1529 Aviation fuelling hose and hose assemblies . . . . . . . . . . 23

EI 1541 Performance requirements for protective coating systems used in aviation fuel storage tanks and piping . . . . . . . . . . . . . . 22

EI 1542 Identification markings for dedicated aviation fuel manufacturing and distribution facilities, airport storage and mobile fuelling equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18,22

EI 1550 Handbook on equipment used for the maintenance and delivery of clean aviation fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1581 Specifications and qualification procedures for aviation jet fuel filter/separators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1582 Specification for similarity for API/EI 1581 aviation jet fuel filter/separators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1583 Laboratory tests and minimum performance levels for aviation fuel filter monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1584 Four–inch hydrant system components and arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

EI 1585 Guidance in the cleaning of aviation fuel hydrant systems at airports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1590 Specifications and qualification procedures for aviation fuel microfilters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1594 Initial pressure strength testing of airport fuel hydrant systems with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI 1596 Design and construction of aviation fuel filter vessels . . . 22

EI 1597 Procedures for overwing fuelling to ensure delivery of the correct fuel grade to an aircraft . . . . . . . . . . . . . . . . . . . . . . . . . 23

EI 1598 Considerations for electronic sensors to monitor free water and/or particulate matter in aviation fuel . . . . . . . . . . . . . . . . . . 23

EI 1599 Laboratory tests and minimum performance levels for aviation fuel dirt defence filters . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI literature review: Biofuels – potential risks to UK water resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,23

EI literature review: Implications of biofuels on microbial spoilage and corrosion within the fuel distribution chain and end use . . . 7,23

EI Recommended Practice 1540: Design, construction, operation and maintenance of aviation fuelling facilities (Model code of safe practice Part 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

EI Research report: A framework for the use of key performance indicators of major hazards in petroleum refining . . . . . . . . . . . . 13

EI Research Report: An investigation into suitable instruments for the measurement of total organic carbon (TOC) in emissions from petroleum distribution terminal vapour recovery units . . . . . . . . 19

EI Research Report: Electrostatic discharges in 2-inch fuel filter monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI Research Report: Electrostatic discharges in two inch aviation fuel filter monitors . Phase 2: Properties needed to control discharges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EI Research Report: Ignition probability review, model development and look–up correlations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

EI Research Report: Investigation into the effects of lubricity additives on the performance of filter/water separators . . . . . . . 22

EI Research Report: Investigation of factors causing leakage at road tanker loading gantry coupler/tanker adaptor interface . . . . .19,20

EI Research Report: Review of methods of bonding a hydrant dispenser (servicer) to an aircraft for refuelling . . . . . . . . . . . . . . 23

EI Research Report: Viability of using sleep contracts as a control measure in fatigue management . . . . . . . . . . . . . . . . . . . . . . . . 10

Electrical installation of facilities for the storage and dispensing of LPG and CNG automotive fuels at vehicle refuelling stations . . . 15,21

Environmental guidelines for petroleum distribution installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,19

Environmental risk assessment of bulk liquids storage facilities: A screening tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,18


33

Inde

x

Expert Panel on Air Quality Standards (EPAQS) discussion document on airborne particles: what is the appropriate measure on which to base a standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

External corrosion awareness handbook: A guide for visual recognition of external integrity threats to upstream oil and gas production plant (A5)/(A6) . . . . . . . . . . . . . . . . . . . . . . . . . 5,12,16

Fire resistance of mudwings for petroleum road tankers . . . . . . . 20

First report of the UK National Expert Group on Transboundary Air Pollution (NEGTAP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Flexible hose management guidelines . . . . . . . . . . . . . . . . 5,13,16

Floating structures: A guide for design and analysis . . . . . . . . . . 17

Fluorescence In Situ Hybridisation (FISH) as a routine tool to monitor bacterial populations in oilfield systems . . . . . . . . . . . . . . 7

Good plant design and operation for onshore carbon capture installations and onshore pipelines . . . . . . . . . . . . . . . . . . . . . .3,12

Guidance document on risk assessment for the water environment at operational fuel storage and dispensing facilities . . . . . . . . .6,21

Guidance for corrosion management in oil and gas production and processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12,16

Guidance for safer design of offshore installations: an overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13,17

Guidance for the storage and dispensing of E5 petrol and B5 diesel at filling stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20,23

Guidance for the storage and handling of fuel grade ethanol at petroleum distribution installations . . . . . . . . . . . . . . . . . . . .18,23

Guidance on assessing the safety integrity of electrical supply protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Guidance on development, implementation and improvement of quality systems in petroleum laboratories . . . . . . . . . . . . . . . . .5,25

Guidance on effective workforce involvement in health and safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,13

Guidance on external cathodic protection of underground steel storage tanks and steel pipework at petrol filling stations . . . . . . 21

Guidance on health surveillance . . . . . . . . . . . . . . . . . . . . . . . . .4,8

Guidance on investigating and analysing human and organisational factors aspects of incidents and accidents . . . . . . . . . . . . . . .10,13

Guidance on managing human and organisational factors in decommissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Guidance on occupational infection with blood borne viruses for health care workers in remote sites or installations . . . . . . . . . . . . 9

Guidance on reducing human failure in petroleum product distribution loading and unloading operations . . . . . . . . . . . .19,20

Guidance on the declassification of tanks previously in leaded gasoline service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,18,20

Guide to IP test method equivalence . . . . . . . . . . . . . . . . . . . . . 25

Guide to quantitative risk assessment for offshore installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14,17

Guidelines for the management of integrity of subsea facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Guidelines for investigation and remediation of petroleum retail sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,21

Guidelines for managing inspection of Ex electrical equipment ignition risk in support of IEC 60079-17 . . . . . . . . . . . . . . . . . . . 15

Guidelines for offshore oil and gas installations that are not permanently attended . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,12,17

Guidelines for physical capability and functionality capacity requirements for emergency response team members . . . . . . . . . 9

Guidelines for routine and non-routine subsea operations from floating vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Guidelines for soil, groundwater and surface water protection and vapour emission control at petrol filling stations . . . . . . . . . . . .6,21

Guidelines for terminal induction training of road tanker drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Guidelines for the analysis of jackup and fixed platform well conductor systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Guidelines for the avoidance of vibration induced fatigue failure in process pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13,16

Guidelines for the calculation of estimates of energy use and gaseous emissions in the decommissioning of offshore structures . . . . . . . . . 7

Guidelines for the design and operation of gasoline vapour emission controls at distribution terminals . . . . . . . . . . . . . . . . . 19

Guidelines for the design and protection of pressure systems to withstand severe fires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14,17

Guidelines for the design and safe operation of shell and tube heat exchangers to withstand the impact of tube failure . . . . . . . .14,17

Guidelines for the identification and control of hazards during the proving of road–loading gantry meters . . . . . . . . . . . . . . . . . . . . 18

Guidelines for the investigation of the microbial content of petroleum fuels and for the implementation of avoidance and remedial strategies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Guidelines for the management of integrity of bolted joints in pressurised systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13,16

Guidelines for the management of safety critical elements . . .13,17

Guidelines for the management, design, installation and maintenance of small bore tubing systems . . . . . . . . . . . . . . .13,16

Guidelines for the safe and optimum design of hydrocarbon pressure relief and blowdown systems . . . . . . . . . . . . . . . . . .14,17

Guidelines for uplift of product from retail filling stations and customers’ tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Guidelines: Microbes in fuel – CD-ROM training tool . . . . . . . . . . 7

Health technical information sheets . . . . . . . . . . . . . . . . . . . . . .8,9

High level framework for process safety management . . . . . . . 3,13

HM 1 . Part I: Calculation of oil quantities . . . . . . . . . . . . . . . . . . 27

HM 2 . Tank calibration . Section 1: Strapping, internal diameter and internal offset methods for the calibration of vertical cylindrical tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 3 . Tank calibration . Section 7: Calibration of underground tanks at service stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 4 . Manual methods for the measurement of level in tanks . Section 1: Non-electrical methods . . . . . . . . . . . . . . . . . . . . . . . 27

HM 7: Density, sediment and water . Section 1: General guidance on test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 8: Density, sediment and water . Section 2: Continuous density measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 9 . Meters . Section 3: Guidance notes for the installation of turbine meters on loading gantries . . . . . . . . . . . . . . . . . . . . . . . 27

HM 10 . Meter Proving . Section 1: Field guide to proving meters with a pipe prover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 11 . Recommended UK operational practice for proving gantry meters (Formerly PMM Part X, S2) . . . . . . . . . . . . . . . . . . . . . . . 27

HM 12 . Meter Proving . Section 3: Code of practice for the design, installation and calibration of pipe provers . . . . . . . . . . . . . . . . . 27

HM 13 . Meter Proving . Section 4: Recommended UK practice for testing, operating and maintaining road tanker metering systems . . 27

HM 14 . Meter Proving . Section 5: Recommended UK operational practice for proving gantry meters fitted with electronic heads . . 27

HM 15 . Meter Proving . Section 7: Calibration of reference meters used for gantry meter proving . Sub-section 7 .1: calibration using a small volume prover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 16 . Meter Proving . Section 7: Calibration of reference meters used for gantry meter proving . Sub-section 7 .2: volumetric and gravimetric tank methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27


34

Inde

x

HM 17 . Part X: Meter Proving . Section 8: Calibration of additive injection systems for road loading gantries . . . . . . . . . . . . . . . . . 27

HM 18 . Meter Proving . Section 10: Recommended UK operational Practice For Proving Turbine Meters in Loading Gantries . . . . . . . 26

HM 19 . Meter proving . Section 11 . Guidelines for field tests and verification of temperature measuring equipment on loading gantries (for non-artificially heated products) . . . . . . . . . . . . . . 27

HM 20 . Meter Proving . Section 12: Aviation Fuelling Positive Displacement Meters (Formerly PMM Part X, S12) . . . . . . . . . . . 27

HM 21 . Static and dynamic measurement of light hydrocarbon liquids . Calculation procedures . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 22 . Part XII: Static and dynamic measurement of refrigerated hydrocarbon liquids : Section 3: Instrumentation for primary measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 23 . Fidelity and security of measurement data transmission systems . Section 1: Electric and/or electronic pulsed data cabled transmission for fluid metering systems . . . . . . . . . . . . . . . . . . . 27

HM 24 . Fidelity and security of measurement data transmission systems . Section 3: Electrical and/or electronic data capture systems for flow metering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 25 . Statistics for static and dynamic measurement (Formerly PMM Part XIV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 26 . Metering systems . Section 1: A guide to liquid metering systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 27 . Metering systems . Section 2: A guide to gas metering systems (Formerly PMM Part XV, S2) . . . . . . . . . . . . . . . . . . . . . . 26

HM 28 . Procedures for oil cargo measurements by cargo surveyors . Section 1: Crude oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 29 . Procedures for petroleum product cargo measurements by cargo inspectors (Formerly PMM Part XVI, S2) . . . . . . . . . . . . . . 26

HM 30 . Procedures for oil cargo measurements by cargo surveyors . Section 3: Liquefied Petroleum Gas . . . . . . . . . . . . . . . . . . . . . . 27

HM 31 . Guide to hydrocarbon management in petroleum refinery operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 32 . Guide to product hydrocarbon management at petroleum product marketing and distribution terminals (Formerly PMM Part XVIII) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 33 . ASTM-IP-API Petroleum measurement tables for light hydrocarbon liquids–Density range 0 .500 to 0 .653 kg/litre at 15 deg C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 34 . List of data required for a comprehensive evaluation of a liquid flowmeter (formerly PMP No . 1) . . . . . . . . . . . . . . . . . . . . 26

HM 35 . Guidelines for users of the API-ASTM-IP petroleum measurement tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 36 . Computer implementation procedures for correcting densities and volumes to 20 C . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 38 . User guidelines for standard temperature accounting . . 27

HM 39 . A guide to recommended measurement practice for compliance with the requirements of HMRC Notice 179 . . . . . . 26

HM 40 . Guidelines for the crude oil washing of ships’ tanks and the heating of crude oil being transported by sea . . . . . . . . . . . . . . . 26

HM 41 . The performance of turbine meters in loading gantries . A review of proving and test data . Supplement to HM 18 . . . . . . . . 27

HM 42 . Vocabulary of dynamic measurement . . . . . . . . . . . . . . 27

HM 43 . Temperature corrections in tank calibration and gauging . . 27

HM 44 . Guidelines for the Development of Uncertainty Estimates for Pipe Prover Calibrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

HM 45 . Statistical control of volumetric metering systems using meter control charts–simplified method . . . . . . . . . . . . . . . . . . . 26

HM 46 . Guidance notes on the application and performance of small volume provers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 47: Recommended Operational Practice for Proving LPG Meters (Formerly PMM Part X, S13 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 48 . Hydrocarbon Management . Meter Proving–Code of practice for the proving of loading gantry meters . . . . . . . . . . . 26

HM 49 / API MPMS Chapter 17 - Marine Measurement Section 9 - Vessel Experience Factor (VEF) . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 50 . Guidelines for the cleaning of tanks and lines for marine tank vessels carrying petroleum and refined products . . . . . . . . . 26

HM 51 . Procedure for bulk liquid chemical cargo inspection by cargo inspectors (API MPMS Ch 17 .12) . . . . . . . . . . . . . . . . . . . 26

HM 52 . Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment . . . . . . . . . . . . . . 26

HM 53 . Guidelines for the management of measurement of emission streams associated with trading and discharge in offshore UKCS . . . 26

HM 54 . Guidelines for the management of measurement for the UK upstream oil and gas industry . . . . . . . . . . . . . . . . . . . . . . . 26

HM 55 . Measurement of refrigerated and/or pressurized cargoes on board marine gas carriers . Liquefied petroleum and chemical gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

EI HM 56/API MPMS Technical report 2570 Continuous on-line measurement of water content in petroleum (crude oil and condensate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 58 . Guidelines for determination of flare quantities from upstream oil and gas facilities . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 60 . Guidelines for the auditing of measurement systems for oil and gas streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

HM 65/API MPMS Chapter 19 .5 . Atmospheric hydrocarbon emissions from marine vessel transfer operations . . . . . . . . . . . . 26

HM 80 Model General Terms and Conditions for Free on Board (FOB) Sale and Purchase of Crude Oil . . . . . . . . . . . . . . . . . . . . . 26

Human factors briefing notes resource pack . . . . . . . . . . . . . .10,14

Human failure types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Implementation of pregnant workers directive management of health and safety at work (amendment) regulations 1994 . . . . . . 9

Improving alertness through effective fatigue management . . . . 10

Inland waters oil spill response: a guidance document incorporating the strategies and techniques for responding to inland surface water oil spills in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introductory guide to environmental damage . . . . . . . . . . . . . . . . 6

IP Standard Methods for analysis and testing of petroleum and related products, and British Standard 2000 Parts, 2011 . . . . .5,24

Legionellosis risk management and Legionella control . Guidance for oil and gas facilities, offshore platforms and refineries . . . . . . . . . 9

Looking forward . Health as a business management issue in the 21st century . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Maintenance of road tankers used for the conveyance of petroleum fuels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Major benzene study results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Managing contractors – a guide for the energy industry . . . . . . . 10

Medical standards for fitness to wear respiratory protective equipment – information for physicians . . . . . . . . . . . . . . . . . . . . 9

Microbially–influenced corrosion (MIC) in double-hull tankers . A scoping paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Model code of safe practice Part 1: The selection, installation, inspection, and maintenance of electrical and non electrical apparatus in hazardous areas . . . . . . . . . . . . . . . . . . . . . . . 4,14,15

Model code of safe practice Part 2: Design, construction and operation of petroleum distribution installations . . . . . . . . . . . . 19

Model code of safe practice Part 9: Liquefied petroleum gas . Vol .1 . Large bulk pressure storage and refrigerated LPG . . . . . . . . . .13,19

Model code of safe practice Part 11: Bitumen safety code . . . .9,25

Model code of safe practice Part 15: Area classification code for installations handling flammable fluids . . . . . . . . . . . . 13,14, 15,17


35

Inde

x

Model code of safe practice Part 16: Tank cleaning safety code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,9,18

Model code of safe practice Part 17 Volume 1: High pressure and high temperature well planning . . . . . . . . . . . . . . . . . . . . . . . . . 17

Model code of safe practice Part 17 Volume 2: Well control during the drilling and testing of high pressure, high temperature offshore wells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Model code of safe practice Part 17 Volume 3: High pressure and high temperature well completions and interventions . . . . . . . . 17

Model code of safe practice Part 19: Fire precautions at petroleum refineries and bulk storage installations . . . . . . . . . . . . . . . . .13,19

Model code of safe practice Part 21: Guidelines for the control of hazards arising from static electricity . . . . . . . . . . . . . . . . . . . . . 15

Mortality of United Kingdom petroleum distribution workers 1951–2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mortality of United Kingdom petroleum refinery workers 1951–2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Multi–product pipelines: minimum criteria to determine additive acceptability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Occupational health provision . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Offshore technical guidance catalogue with specific relevance to major accident hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13,17

Operational guidelines on the use of oil spill dispersants at sea . . 7

PARLOC 2001 – Pipeline and riser loss of containment database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14,17

Petroleum road tanker design and construction . . . . . . . . . . . .4,19

Petroleum road tanker drivers: Evaluation and control of exposure to noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Planning for the use of oil spill dispersants . . . . . . . . . . . . . . . . . . 7

Pocket guide to safety for personnel working on oil installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5,19

Predictions of minimum spark ignition energy and quenching distances for CH4/H2 and C3H8/H2 mixtures with air . . . . . . . . 14

Procedures for reporting occupationally related illness . . . . . . . . . 9

Procedures for the reclaim of duty on recovered vapour at duty suspended installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Protocol for the determination of the speciation of hydrocarbon emissions from oil refineries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Protocol for the estimation of petroleum refinery process plant fugitive VOC emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,7

Protocol for the estimation of VOC emissions from petroleum refineries and gasoline marketing operations . . . . . . . . . . . . . . .5,7

Psychological wellbeing in the workplace . . . . . . . . . . . . . . . . . . . 9

Quantified risk assessment of the ignition of flammable vapour on petrol filling station forecourts during road tanker offloading due to thermite sparking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Recommendations for radio communication equipment and its installation in petroleum road tankers . . . . . . . . . . . . . . . . . . . . 20

Report on workshop on human factors in the petroleum industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Report on leukaemia risks in relation to benzene exposure . . . . . . 9

Report on the risk of static ignition during vehicle refuelling: A study of the available relevant research . . . . . . . . . . . . . . . . .15,21

Reported and potential occurrence of ether oxygenates on water resources in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Research Project . Evaluation of the performance of meters in loading gantries . Phase 2 – Tests on products other than gas oil . . . . . . . . 27

Research report: A framework for monitoring the management of ageing effects on safety critical elements . . . . . . . . . . . . . . . .13,16

Research report: Ambient monitoring of benzo-a-pyrene (B[a]P) emissions at two oil refineries . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Research report: Hazard and risk assessment for bulk liquefied petroleum gas storage events . . . . . . . . . . . . . . . . . . . . . . . . . . 3,12

Research report: Human factors performance indicators for the energy and related process industries . . . . . . . . . . . . . . . . . . . .3,10

Research Report: Non CO2 greenhouse gas emissions from oil

refineries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Research Report: Speciation of VOC emissions from UK oil refineries (Part 1-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Research Report: Dispersion modelling and calculations in support of EI Model code of safe practice Part 15: Area classification code for installations handling flammable fluids . . . . . . . . . . . . . . . . . 14

Research report: Viability of using direct toxicity assessment for petroleum refinery effluent toxicity assessment . . . . . . . . . . . . . . 3,7

Review of COMEAP and IOM Reports on long term effects of particles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Riskmanager™ for terminals: Generic risk assessment tool for petroleum distribution facilities . . . . . . . . . . . . . . . . . . . . . . . . . 19

Safe staffing arrangements – user guide for CRR348/2001 methodology: Practical application of Entec/HSE process operations staffing assessment methodology and its extension to automated plant and/or equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Safety information bulletins . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Seminar Proceedings: ‘Can mobile phone communications ignite petroleum vapour?’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,21

Sustainable urban drainage systems at oil installations . . . . . . . . . 6

Tank calibration . Section 5A: Calibration of barge tanks . . . . . . . . 27

Tank calibration . Section 5B: Calibration of tanks on ships and oceangoing barges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Technical guidance on hazard analysis for onshore carbon capture and storage installations and pipelines . . . . . . . . . . . . . . . . 3,12,14

Technical workshop proceedings: Fuel storage tank overfill prevention systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12,18

Technical workshop proceedings: Initial report - Framework for high-level process safety management . . . . . . . . . . . . . . . . . .5,13

Testing of vapour containment on petroleum road tankers . . . . . 20

The effect of nitrate anti–souring treatment on corrosion of mild steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

The human health effects of benzene . . . . . . . . . . . . . . . . . . . . . 9

The quality of aviation fuel available in the United Kingdom annual survey 2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

The stimulation of Nitrate Reducing Bacteria (NRB) in oilfield systems to control Sulfate Reducing Bacteria (SRB) activity, Microbiologically Influenced Corrosion (MIC) and reservoir souring: an introductory view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Transboundary air pollution acidification, eutrophication and ground level ozone in the UK . Draft report of the National Expert Group on Transboundary Air Pollution – March 2001 . Response of the Institute of Petroleum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

UK coastal and marine resource atlas report . . . . . . . . . . . . . . . . . 7

UK National Air Quality Strategy (NAQS) guidance for the evaluation of stage 3 reviews and an assessment of their potential effects on key industry installations . . . . . . . . . . . . . . . . . . . . . . . 6

UK oil refining and the atmospheric emission of dioxins . A briefing paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Vapour recovery units – Guidance on preventing and controlling temperature excursions in carbon beds . . . . . . . . . . . . . . . . . . . 19

VOC emission control and its costs in the petrochemical sector . Impact of the ‘Gothenburg’ Protocol and National Emissions Ceilings Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Workshop on fatigue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,10


36

How to orderUnless specified in the listings, the titles in this catalogue are available from the EI’s online publications website, or from Portland Customer Services, the EI’s official distributor .

Please check the notes under the entry for the publication you require and send your order to the appropriate address .

EI Publications website: www.energypublishing.org

Portland Customer ServicesCommerce Way, Whitehall Industrial EstateColchester CO2 8HP, UKt: +44 (0)1206 796 351f: +44 (0)1206 799 331e: sales@portland–services .com

Discounts for EI MembersIndividual and Company members of the EI are entitled to a 25% discount off the catalogue price on most EI publications available from Portland Customer Services, if they quote their Membership Number at the time the order is placed .

For further information on becoming a member of the EI, please contact the Membership Department: t: +44 (0)20 7467 7100 e: membership@energyinst .org or visit the EI website for details on how to apply www .energyinst .org

Discounts for Booksellers and AgentsA 10% discount is available on most EI publications from Portland Customer Services . Please check at the time of ordering .

Bulk order discounts are available on most of our titles, contact [email protected] for more information .

E&OE .

Energy Institute61 New Cavendish StreetLondon W1G 7AR, UKt: +44 (0)20 7467 7157f: +44 (0)20 7255 1472e: pubs@energyinst .orgwww .energyinst .org

How

to

orde

r

www.energyinst.orgEnergy Institute – the home of energy professionals

Proud of what you do?Demonstrate your professionalism

If you’re proud of the work you do, why not stand up andshout about it?

As your professional membership body, theEnergy Institute is keen to encourage ourmembers to demonstrate their professionalism.

Could you be a Professional Member? Howabout a Chartered Engineer, a Chartered EnergyManager, a Chartered Environmentalist, or aChartered Scientist?

Professional members can also apply to add Chartered Titles totheir existing titles.

Professionalism is essential to meeting the energy challenges we facenow and in the future. Demonstrate YOUR professionalism throughthe Energy Institute (EI) professional recognition process.

Professional membership grades availablethrough the EI include:

� Technician Member (TMEI)� Member (MEI)� Fellow (FEI)

Other professional titles include:

� Engineering Technician (EngTech)� Incorporated Engineer (IENG)� Chartered Engineer (CEng)� Chartered Environmentalist (CEnv)� Chartered Scientist (CSci)� Chartered Energy Manager

So if you want to demonstrate your professionalism, you’re looking for training, or you just want a source of information,you can join as an affiliate member for the fast track route to membership benefits, which include:

Register your interest by emailing Simon Price at [email protected]

• Free magazine subscription to Energy World or Petroleum Review, keeping you up to date with the latest industrynews and developments

• Access to professional recognition and career development opportunities, offering higher levels of membership,Chartered Engineer, Chartered Energy Manager Chartered Environmentalist and Chartered Scientist registration, and more, toenhance your professionalism

• Discounts on journals, publications, events, training courses, conferences and workshops, to further enhance yourindustry knowledge

• Free access to the EI Library and Information Service, offering a huge resource of knowledge, information and research• Exclusive information from the ‘members only’ section of our website• Unrivalled peer networking opportunities through a series of free of charge events, including member workshops,

branch events, and online special interest groups

SimonUPDATEJAN11.qxd:Layout 1 24/1/11 17:25 Page 1

Journal of the Energy Institute

Volume 84 (2011), 4 issues per yearPrint ISSN: 0144-2600Online ISSN: 1746-0220

Editor: Professor P T Williams, University of Leeds, UK([email protected])

The Journal of the Energy Institute providespeer-reviewed coverage of original, high-quality research on energy engineering and technology. The journal’s broad coverage reflects changes in energy technology that result from the transition to more efficient energy production and end use togetherwith reduced carbon emission.

Scopel Alternative energy sourcesl Combustion engineeringl Energy conversion, recovery and

efficiencyl Energy storage and transmissionl Fire, safety and hazardsl Instrumentation, sensors and controll Petroleum engineering

Top articlesDownload the top 10 articles free online atwww.maney.co.uk/journals/eni. Click onthe ‘Top articles’ link in the right-hand menu.

Topics include; sustainable power generation, CO2 sequestration, SOFC &combustion.

Available online at www.ingentaconnect.com/content/maney/eni

Subscription informationEnergy Institute members can subscribe tothe journal at a reduced rate. Apply atwww.energyinst.org.

Institutional print & online and online-onlyrates are available online atwww.maney.co.uk/journals/eni

www.maney.co.uk/journals/eni www.energyinst.org

Energy Institute ENI Advert:Layout 1 04/02/2011 09:50 Page 1

Documents

EI Publications catalogue 2011