8/17/2019 EH23310_1__pg718__en

1/2

Clamping ElementsDown-Thrust Clamps

Erwin Halder KG www.halder.com Page 1 of 2

Published on: 27.11.2015

Down-Thrust Clamps• size 25

EH 23310. 

Product Description

The down-thrust clamps provide the following advantages:• Rapid manual clamping by means of clamping screw, adjustable clamping lever or adjustable

eccentric quick clamp.• Easy and quick changing of the work piece by swinging the clamping head to the left or right.

• Reduced space requirements due to the compact design.• Easy adaption even to larger clamping heights by means of height adjusting cylinders.

Material

• Case-hardened steel, case-hardened,blackened and ground

Assembly

Down-thrust clamps can be fastened in twodifferent ways:1. with a nut for T-slots (DIN 508)2. directly to the mounting plate e.g. of a fixture

with a set screwThe cylinder has to rest on the entire surface.

More information

Notes

• RoHS compliant• REACH compliant

References

The clamping height can be increased withEH 23310. height adjusting cylinders and EH1007. washers from the Halder WorkholdingSystem, and equally lowered by usingclamping elements e.g. EH 22730.

Further products

• Height Adjusting Cylinders• Plain Washers

 

Drawing

 

8/17/2019 EH23310_1__pg718__en

2/2

Clamping ElementsDown-Thrust Clamps

Erwin Halder KG www.halder.com Page 2 of 2

Published on: 27.11.2015

Order information

System Ref. No.

[g]

with adjustable clamping lever with axial bearing – picture 1

363 –   23310.0024

with clamping screw – picture 2

215 V40 23310.0025with adjustable excentric quick clamp – picture 3

340 –   23310.0026

 

Application example

http://halder.com/gb/23310.0026http://halder.com/gb/23310.0025http://halder.com/gb/23310.0024